Low molecular weight chitosan--preparation with the aid of pepsin, characterization, and its bactericidal activity

Development, Characterization, and Antimicrobial Evaluation of Hybrid Nanoparticles (HNPs) Based on Phospholipids, Cholesterol, Colistin, and Chitosan Against Multidrug-Resistant Gram-Negative Bacteria

Background: Colistin, a lipopeptide antibiotic usually used as a last resort against multidrug-resistant bacterial strains, has also begun to address the challenge of antimicrobial resistance. Objective: this study evaluates whether hybrid nanoparticles (HNPs) composed of Phospholipon® 90G, cholesterol, and colistin can enhance its effectiveness against resistant clinical isolates of Klebsiella pneumoniae, a clinically significant Gram-negative bacterium. Methods: HNPs were developed using the ethanol injection method and coated with chitosan through a layer-by-layer technique. HNP characterization included measurements of particle size, polydispersity index (PDI), and zeta potential, along with thermal (DSC) and spectrophotometric (FT-IR) analyses. Ultrafiltration and ATR-FTIR were employed to assess colistin's association and release efficiencies. The biological evaluation followed CLSI guidelines. Results: uncoated hybrid nanoparticles (U-HNP) and chitosan-coated hybrid nanoparticles (Ch-HNP) described monodisperse populations, with respective PDI values of ~0.124 and ~0.150, Z-averages of ~249 nm and ~250 nm, and zeta potential values of +17 mV and +20 mV. Colistin's association and release efficiencies were approximately 79% and 10%, respectively. Regarding antimicrobial activity, results showed that colistin as part of HNPs is poorly effective against this microorganism. However, in the most resistant strain, colistin activity increased slightly when the HNP was coated with chitosan. Conclusions: HNPs described high stability against disaggregation, limiting the colistin release and, therefore, affecting antimicrobial performance.

Chitosan as excellent bio-macromolecule with myriad of anti-activities in biomedical applications - A review

The aim of the study is to explore the myriad of anti-activities of chitosan - deacylated derivative of chitin in biomedical applications. Chitosan consists of reactive residual amino groups, which can be modified chemically to obtain wide range of derivatives. These derivatives exhibit the controlled physicochemical characteristics, which in turn improve its functional properties. Such derivatives find numerous applications in the field of biomedical science, agriculture, tissue engineering, bone regeneration and environmental science. This study presents a comprehensive overview of the multifarious anti-activities of chitosan and its derivatives in the field of biomedical science including anti-microbial, antioxidant, anti-tumor, anti-HIV, anti-fungal, anti- inflammatory, anti-Alzheimer's, anti-hypertensive and anti-diabetic activity. It briefly details these anti-activities with respect to its mode of action, pharmacological effects and potential applications. It also presents the overview of current research exploring novel derivatives of chitosan and its anti- activities in the recent past. Finally, the review projects the prospective potential of chitosan and its derivatives and expects to encourage the readers to develop new drug delivery systems based on such chitosan derivatives and explore its applications in biomedical science for benefit of mankind.

Chitosan: Properties and Its Application in Agriculture in Context of Molecular Weight

Chitosan is a naturally occurring compound that can be obtained from deacetylated chitin, which is obtained from various sources such as fungi, crustaceans, and insects. Commercially, chitosan is produced from crustaceans. Based on the range of its molecular weight, chitosan can be classified into three different types, namely, high molecular weight chitosan (HMWC, >700 kDa), medium molecular weight chitosan (MMWC, 150-700 kDa), and low molecular weight chitosan (LMWC, less than 150 kDa). Chitosan shows several properties that can be applied in horticultural crops, such as plant root growth enhancer, antimicrobial, antifungal, and antiviral activities. Nevertheless, these properties depend on its molecular weight (MW) and acetylation degree (DD). Therefore, this article seeks to extensively review the properties of chitosan applied in the agricultural sector, classifying them in relation to chitosan's MW, and its use as a material for sustainable agriculture.

Extraction of Chitosan with Different Physicochemical Properties from Cunninghamella echinulata (Thaxter) Thaxter for Biological Applications

The conventional production of chitosan from crustaceans has many limitations. An attempt was made to optimize chitosan production from fungi. Soil fungi were isolated, identified, and screened for high glucosamine content. Among the fungal isolates tested, Cunninghamella echinulata showed high glucosamine content. The biomass production of C. echinulata was standardized under different growth parameters. The physicochemical characterization of derived chitosan isolates was distinctive and diverged as supported by the FT-IR, molecular mass distribution, degree of deacetylation, and crystallinity. Molecular mass distribution ranged from 1 to 9 mers. The degree of deacetylation was observed to be maximum in C6 (80.88%), which increased with the increase in alkali concentration. In the chitosan isolate, C1 was non-toxic to Vero cells up to 250 µg/mL. In the physicochemical and functional properties of chitosan isolate, C1 was found to be unique and diverse; further detailed investigations on this isolate might help to develop some biomaterials with improved biocompatibility.

A decade development in the application of chitosan-based materials for dye adsorption: A short review

The presence of dyes in the aquatic environment as a result of anthropogenic activities, especially textile industries, is a critical environmental challenge that hinders the availability of potable water. Different wastewater treatment approaches have been used to remediate dyes in aquatic environments; however, most of these approaches are limited by factors ranging from high cost to the incomplete removal of the dyes and contaminants. Thus, the use of adsorption as a water treatment technology to remove dyes and other contaminants has been widely investigated using different adsorbents. This study evaluated the significance of chitosan as a viable adsorbent for removing dyes from water treatment. We summarised the literature and research results obtained between 2009 and 2020 regarding the adsorption of dyes onto chitosan and modified chitosan-based adsorbents prepared through physical and chemical processing, including crosslinking impregnation, grafting, and membrane preparation. Furthermore, we demonstrated the effects of various chitosan-based materials and modifications; they all improve the properties of chitosan by promoting the adsorption of dyes. Hence, the application of chitosan-based materials with various modifications should be considered a cutting-edge approach for the remediation of dyes and other contaminants in aquatic environments toward the global aim of making potable water globally available.

The impact of chitooligosaccharides and their derivatives on the in vitro and in vivo antitumor activity: A comprehensive review

Chitooligosaccharides (COS) are the degraded products of chitin or chitosan. COS is water-soluble, non-cytotoxic to organisms, readily absorbed through the intestine, and eliminated primarily through the kidneys. COS possess a wide range of biological activities, including immunomodulation, cholesterol-lowering, and antitumor activity. Although work on COS goes back at least forty years, several aspects remain unclear. This review narrates the recent developments in COS antitumor activities, while paying considerable attention to the impacts of physicochemical properties (such as molecular weight and degrees of deacetylation) and chemical modifications both in vitro and in vivo. COS derivatives not only improve some physicochemical properties, but also expand the range of applications in drug and gene delivery. COS (itself or as a drug carrier) can inhibit tumor cell proliferation and metastasis, which might be attributed to its ability to stimulate the immune response along with its anti-angiogenic activity. Further, an attempt has been made to report limitations and future research. The potential health benefits of COS and its derivatives against cancer may offer a new insight on their applications in food and medical fields.

Nonspecific enzymatic hydrolysis of a highly ordered chitopolysaccharide substrate

Chitin and chitosan can undergo nonspecific enzymatic hydrolysis by several different hydrolases. This susceptibility to nonspecific enzymes opens up many opportunities for producing chitooligosaccharides and low molecular weight chitopolysaccharides, since specific chitinases and chitosanases are rare and not commercially available. In this study, chitosan and chitin were hydrolyzed using several commercially available hydrolases. Among them, cellulases with the highest specific activity demonstrated the best activity, as indicated by the rapid decrease in viscosity of a chitosan solution. The hydrolysis of chitosan by nonspecific enzymes generated a sugar release that corresponded to the decrease in the degree of polymerization. This decrease reached a maximum of 3.3-fold upon hydrolysis of 10% of the sample. Cellulases were better than lysozyme or amylases at hydrolyzing chitosan and chitin. Analysis of ¹³C CP-MAS NMR and FTIR spectra of chitin after cellulase treatment revealed changes in the chitin crystal structure related to rearrangement of inter- and intramolecular H-bonds. The structural changes and decreases in crystallinity allowed dissolution of chitin molecules of high molecular weight and enhanced the solubility of chitin in alkali by 10-12% compared to untreated chitin.

Residues of acidic chitinase cause chitinolytic activity degrading chitosan in porcine pepsin preparations

Commercially available porcine pepsin preparations have been used for the production of chitooligosaccharides with various biomedical activities. However, the origin of this activity is not well understood. Here we show that the chitosan-degrading activity is conferred by residues with chitinolytic activity of truncated forms of acidic chitinase (Chia) persisting in the pepsin preparation. Chia is an acid-stable and pepsin-resistant enzyme that degrades chitin to produce N-acetyl-D-glucosamine dimer. We found that Chia can be truncated by pepsin under stomach-like conditions while maintaining its enzymatic activity. Similarly to the full-length protein, truncated Chia as well as the pepsin preparations digested chitosan with different degrees of deacetylation (DD: 69-84%) with comparable degradation products. The efficiency was DD-dependent with a marked decrease with higher DD, indicating that the chitosan-degrading activity in the pepsin preparation is due to the chitinolytic activity rather than chitosanolytic activity. We suggest that natural or recombinant porcine Chia are suitable for producing chitooligosaccharides for biomedical purposes.

Anticancer Activity of Chitosan, Chitosan Derivatives, and Their Mechanism of Action

Tailoring of chitosan through the involvement of its amino, acetamido, and hydroxy groups can give derivatives of enhanced solubility and remarkable anticancer activity. The general mechanism of such activity is associated with the disturbances in normal functioning of cell cycle, interference to the central dogma of biological system from DNA to RNA to protein or enzymatic synthesis, and the disruption of hormonal path to biosynthesis to inhibit the growth of cancer cells. Both chitosan and its various derivatives have been reported to selectively permeate through the cancer cell membranes and show anticancer activity through the cellular enzymatic, antiangiogenic, immunoenhancing, antioxidant defense mechanism, and apoptotic pathways. They get sequestered from noncancer cells and provide their enhanced bioavailability in cancer cells in a sustained release manner. This review presents the putative mechanisms of anticancer activity of chitosan and mechanistic approaches of structure activity relation upon the modification of chitosan through functionalization, complex formation, and graft copolymerization to give different derivatives.

Low-molecular-weight sulfonated chitosan as template for anticoagulant nanoparticles

PURPOSE

In this work, low-molecular-weight sulfoethyl chitosan (SECS) was used as a model template for the generation of silver core-shell nanoparticles with high potential as anticoagulants for medical applications.

MATERIALS AND METHODS

SECS were synthesized by two reaction pathways, namely Michael addition and a nucleophilic substitution with sodium vinylsulfonate or sodium 2-bromoethanesulfonate (NaBES). Subsequently, these derivatives were used as reducing and capping agents for silver nanoparticles in a microwave-assisted reaction. The formed silver-chitosan core-shell particles were further surveyed in terms of their anticoagulant action by different coagulation assays focusing on the inhibition of either thrombin or cofactor Xa.

RESULTS

In-depth characterization revealed a sulfoalkylation of chitosan mainly on its sterically favored O6-position. Moreover, comparably high average degrees of substitution with sulfoethyl groups (DSSE) of up to 1.05 were realized in reactions with NaBES. The harsh reaction conditions led to significant chain degradation and consequently, SECS exhibits masses of <50 kDa. Throughout the following microwave reaction, stable nanoparticles were obtained only from highly substituted products because they provide a sufficient charge density that prevented particles from aggregation. High-resolution transmission electron microscopy images reveal that the silver core (diameter ~8 nm) is surrounded by a 1-2 nm thick SECS layer. These core-shell particles and the SECS itself exhibit an inhibiting activity, especially on cofactor Xa.

CONCLUSION

This interesting model system enabled the investigation of structure-property correlations in the course of nanoparticle formation and anticoagulant activity of SECS and may lead to completely new anticoagulants on the basis of chitosan-capped nanoparticles.

Chitosans inhibit the growth and the adhesion of Klebsiella pneumoniae and Escherichia coli clinical isolates on urinary catheters

OBJECTIVE

The aim of this study was to determine the antimicrobial activity of different chitosans (CS) against typical colonizing pathogens of the urinary tract and to assess their efficacy against bacterial adhesion and the subsequent biofilm formation on urinary catheters.

METHODS

The antimicrobial activity of high and low molecular weight CS (50 and 150 kDa) at pH 5.0 and 6.0 was tested against Klebsiella pneumoniae and Escherichia coli clinical isolates by time-kill studies. The anti-adhesion assays on Foley urinary catheters were performed in Artificial Urine Medium (AUM) with the addition of each CS (AUM-CS) at the same pH values. Finally, the efficacy over time of chitosan treatments on bacterial adhesion on urinary catheters was determined.

RESULTS

A viability reduction of K. pneumoniae and E. coli isolates, regardless of pH value, was evidenced in time-kill studies, in particular in the presence of CS 50 kDa. As regards the anti-adhesion efficacy on urinary catheters, high and low molecular weight CS evidenced a higher efficacy to reduce bacterial adhesion at pH 5.0. A low number of viable K. pneumoniae and E. coli cells were recovered from catheters after CS treatments, highlighting a promising efficacy over time.

CONCLUSION

Our data show the potential of chitosans to reduce or prevent not only the adhesion of well-known human uropathogens on urinary catheters but also the re-growth ability of the uropathogens.

pH Dependence of Chitosan Enzymolysis

As a means of making chitosan more useful in biotechnological applications, it was hydrolyzed using pepsin, chitosanase and α-amylase. The enzymolysis behavior of these enzymes was further systematically studied for its effectiveness in the production of low-molecular-weight chitosans (LMWCs) and other derivatives. The study showed that these enzymes depend on ion hydronium (H3O+), thus on pH with a pH dependence fitting R2 value of 0.99. In y = 1.484[H^+] + 0.114, the equation of pH dependence, when [H^+] increases by one, y (k_0/k_m) increases by 1.484. From the temperature dependence study, the activation energy (Ea) and pre-exponential factor (A) were almost identical for two of the enzymes, but a considerable difference was observed in comparison with the third enzyme. Chitosanase and pepsin had nearly identical Ea, but α-amylase was significantly lower. This serves as evidence that the hydrolysis reaction of α-amylase relies on low-barrier hydrogen bonds (LBHBs), which explains its low Ea in actual conditions. The confirmation of this phenomenon was further derived from a similarly considerable difference in the order magnitudes of A between α-amylase and the other two enzymes, which was more than five. Variation of the rate constants of the enzymatic hydrolysis of chitosan with temperature follows the Arrhenius equation.

Optimization and Characterization of Chitosan Enzymolysis by Pepsin

Pepsin was used to effectively degrade chitosan in order to make it more useful in biotechnological applications. The optimal conditions of enzymolysis were investigated on the basis of the response surface methodology (RSM). The structure of the degraded product was characterized by degree of depolymerization (DD), viscosity, molecular weight, FTIR, UV-VIS, SEM and polydispersity index analyses. The mechanism of chitosan degradation was correlated with cleavage of the glycosidic bond, whereby the chain of chitosan macromolecules was broken into smaller units, resulting in decreasing viscosity. The enzymolysis by pepsin was therefore a potentially applicable technique for the production of low molecular chitosan. Additionally, the substrate degradation kinetics of chitosan were also studied over a range of initial chitosan concentrations (3.0~18.0 g/L) in order to study the characteristics of chitosan degradation. The dependence of the rate of chitosan degradation on the concentration of the chitosan can be described by Haldane’s model. In this model, the initial chitosan concentration above which the pepsin undergoes inhibition is inferred theoretically to be about 10.5 g/L.

Chitosan-thiomer stabilized silver nano-composites for antimicrobial and antioxidant applications

The present study involves a microwave assisted, greener synthesis of chitosan thiomer silver nanocomposites via an innocuous thiourea reagent for antimicrobial applications.

Radical-scavenging activity of glutathione, chitin derivatives and their combination‡

Since chitosan and its amino-, cinnamo- or cinnamo-amino- derivatives are acid-soluble, the effect of acetic acid on hyaluronan (HA) macromolecules degraded by Cu(II) ions and ascorbate was examined to produce reactive oxygen species (ROS). Further, the effects of glutathione (GSH), chitosan and its derivatives, added individually or in combination, on the quenching of ROS and ABTS

Enhanced multiparametric hyaluronan degradation for production of molar-mass-defined fragments

Hyaluronic acid (HA) is known to serve as a dynamic mediator intervening in many physiological functions. Its specific effect has been repeatedly confirmed to be strongly influenced by the molecular size of hyaluronan fragments. However common technological approaches of HA fragments production have their limitations. In many cases, the final products do not meet the strict pharmaceutical requirements, specifically due to size polydispersity and reaction contaminants. We present novel methodology based on combination of unique incidental ability of the plant-derived protease papain to split the glycosidic bonds and an indispensable advantages of biocompatible macroporous material with incorporated ferrous ions serving as carrier for covalent papain fixation. This atypical and yet unpublished highly efficient multiparametric approach allows enhanced HA fragmentation for easily and safely producing molar-mass-defined HA fragments with narrow size distribution. Native polyacrylamide gel electrophoresis (PAGE) and size exclusion chromatography/multi-angle light scattering (SEC-MALS) confirmed the effectiveness of our multiparametric approach.

Non-covalent modification of thrombolytic agent nattokinase: simultaneous improvement of fibrinolysis activity and enzymatic stability

Folic acid modified chitosan (CS-FA) was synthesized and applied to modify Nattokinase (NK), a thrombolytic agent, for better fibrinolysis activity and stability. It provides great opportunities in curing cardiovascular disease (CVD), a leading cause of death globally.

A novel catalysis by porcine pepsin in debranching guar galactomannan

BACKGROUND

Pepsin (porcine stomach mucosa, E.C. 3.4.23.1), an acid protease catalyzes the hydrolysis (debranching) of guar galactomannan (GG), a co-polymer of mannose and galactose residues thereby showing its non-specific catalysis towards glycosidic substrates.

RESULTS AND CONCLUSIONS

Use of non-specific inhibitors, chemical modification agents and peptide mapping of native and GG--bound pepsin upon proteolytic digestion with Staphylococcus aureus V8 protease revealed the involvement of Asp(138) residue in the catalysis, which was confirmed by computational modelling studies.

GENERAL SIGNIFICANCE

Here we show a novel mode of catalysis (other than proteolysis) by porcine pepsin with a different active site residue.

Transcriptional responses of Bacillus cereus towards challenges with the polysaccharide chitosan

The antibacterial activity of the polysaccharide chitosan towards different bacterial species has been extensively documented. The response mechanisms of bacteria exposed to this biopolymer and the exact molecular mechanism of action, however, have hardly been investigated. This paper reports the transcriptome profiling using DNA microarrays of the type-strain of Bacillus cereus (ATCC 14579) exposed to subinhibitory concentrations of two water-soluble chitosan preparations with defined chemical characteristics (molecular weight and degree of acetylation (F(A))). The expression of 104 genes was significantly altered upon chitosan A (weight average molecular weight (M(w)) 36.0 kDa, F(A) = 0.01) exposure and 55 genes when treated with chitosan B (M(w) 28.4 kDa, F(A) = 0.16). Several of these genes are involved in ion transport, especially potassium influx (BC0753-BC0756). Upregulation of a potassium transporting system coincides with previous studies showing a permeabilizing effect on bacterial cells of this polymer with subsequent loss of potassium. Quantitative PCR confirmed the upregulation of the BC0753 gene encoding the K(+)-transporting ATPase subunit A. A markerless gene replacement method was used to construct a mutant strain deficient of genes encoding an ATP-driven K(+) transport system (Kdp) and the KdpD sensor protein. Growth of this mutant strain in potassium limiting conditions and under salt stress did not affect the growth pattern or growth yield compared to the wild-type strain. The necessity of the Kdp system for potassium acquisition in B. cereus is therefore questionable. Genes involved in the metabolism of arginine, proline and other cellular constituents, in addition to genes involved in the gluconeogenesis, were also significantly affected. BC2798 encoding a chitin binding protein was significantly downregulated due to chitosan exposure. This study provides insight into the response mechanisms of B. cereus to chitosan treatment and the significance of the Kdp system in potassium influx under challenging conditions.

Inhibition of Bacillus cereus spore outgrowth and multiplication by chitosan

Bacillus cereus is an endospore-forming bacterium able to cause food-associated illness. Different treatment processes are used in the food industry to reduce the number of spores and thereby the potential of foodborne disease. Chitosan is a polysaccharide with well-documented antibacterial activity towards vegetative cells. The activity against bacterial spores, spore germination and subsequent outgrowth and growth (the latter two events hereafter denoted (out)growth), however, is poorly documented. By using six different chitosans with defined macromolecular properties, we evaluated the effect of chitosan on Bacillus cereus spore germination and (out)growth using optical density assays and a dipicolinic acid release assay. (Out)growth was inhibited by chitosan, but germination was not. The action of chitosan was found to be concentration-dependent and also closely related to weight average molecular weight (M(w)) and fraction of acetylation (F(A)) of the biopolymer. Chitosans of low acetylation (F(A)=0.01 or 0.16) inhibited (out)growth more effectively than higher acetylated chitosans (F(A)=0.48). For the F(A)=0.16 chitosans with medium (56.8kDa) and higher M(w) (98.3kDa), a better (out)growth inhibition was observed compared to low M(w) (10.6kDa) chitosan. The same trend was not evident with chitosans of 0.48 acetylation, where the difference in activity between the low (19.6kDa) and high M(w) (163.0kDa) chitosans was only minor. In a spore test concentration corresponding to 10(2)-10(3)CFU/ml (spore numbers relevant to food), less chitosan was needed to suppress (out)growth compared to higher spore numbers (equivalent to 10(8)CFU/ml), as expected. No major differences in chitosan susceptibility between three different strains of B. cereus were detected. Our results contribute to a better understanding of chitosan activity towards bacterial spore germination and (out)growth.

Characteristics of deacetylation and depolymerization of β-chitin from jumbo squid (Dosidicus gigas) pens

This study evaluated the deacetylation characteristics of β-chitin from jumbo squid (Dosidicus gigas) pens by using strongly alkaline solutions of NaOH or KOH. Taguchi design was employed to investigate the effect of reagent concentration, temperature, time, and treatment step on molecular mass (MM) and degree of deacetylation (DDA) of the chitosan obtained. The optimal treatment conditions for achieving high MM and DDA of chitosan were identified as: 40% NaOH at 90°C for 6h with three separate steps (2h+2h+2h) or 50% NaOH at 90°C for 6h with one step, or 50% KOH at 90°C for 4h with three steps (1h+1h+2h) or 6h with one step. The most important factor affecting DDA and MM was temperature and time, respectively. The chitosan obtained was then further depolymerized by cellulase or lysozyme with cellulase giving a higher degradation ratio, lower relative viscosity, and a larger amount of reducing-end formations than that of lysozyme due to its higher susceptibility. This study demonstrated that jumbo squid pens are a good source of materials to produce β-chitosan with high DDA and a wide range of MM for various potential applications.

Effects of the molecular weight and the degree of deacetylation of chitosan oligosaccharides on antitumor activity

Effects of the degree of deacetylation (DDA) and the molecular mass of chitosan oligosaccharides (CTS-OS), obtained from the enzymatic hydrolysis of high molecular weight chitosan (HMWC), on antitumor activity was explored. The DDA and molecular weights of CTS-OS were determined by matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-TOF MS) analysis. The CTS-OS were found to be a mixture of mainly dimers (18.8%), trimers (24.8%), tetramers (24.9%), pentamers (17.7%), hexamers (7.1%), heptamers (3.3%), and octamers (3.4%). The CTS-OS were further fractionated by gel-filtration chromatography into two major fractions: (1) COS, consisting of glucosamine (GlcN)_n, n = 3–5 with DDA 100%; and (2) HOS, consisting of (GlcN)₅ as the minimum residues and varying number of N-acetylglucosamine (GlcNAc)_n, n = 1–2 with DDA about 87.5% in random order. The cytotoxicities, expressed as the concentration needed for 50% cell death (CC₅₀), of CTS-OS, COS, and HOS against PC3 (prostate cancer cell), A549 (lung cancer cell), and HepG2 (hepatoma cell), were determined to be 25 μg·mL⁻¹, 25 μg·mL⁻¹, and 50 μg·mL⁻¹, respectively. The HMWC was approximately 50% less effective than both CTS-OS and COS. These results demonstrate that the molecular weight and DDA of chitosan oligosaccharides are important factors for suppressing cancer cell growth.

Sulfonation of papain-treated chitosan and its mechanism for anticoagulant activity

The novel low-molecular-weight chitosan polysulfate (MW 5120-26,200 Da) was prepared using the depolymerization of chitosan with papain (EC. 3.4.22.2). The sulfonation of depolymerized products was performed using chlorosulfonic acid in N,N-dimethylformamide under semi-heterogeneous conditions. The structures of the products were characterized by FTIR, (13)C NMR, and (1)H NMR (1D, 2D NMR) spectroscopy. The present study sheds light on the mechanism of anticoagulant activity of chitosan polysulfate. Anticoagulant activity was investigated by an activated partial thromboplastin assay, a thrombin time assay, a prothrombin time assay, and thrombelastography. Surface plasmon resonance also provided valuable data for understanding the relationship between the molecular binding of sulfated chitosan to two important blood clotting regulators, antithrombin III and heparin cofactor II. These results show that the principal mechanism by which this chitosan polysulfate exhibits anticoagulant activity is mediated through heparin cofactor II and is dependent on polysaccharide molecular weight.

Nonspecific activity of Bacillus acidopullulyticus pullulanase on debranching of guar galactomannan

Pullulanase (EC 3.2.1.41) from Bacillus acidopullulyticus could preferentially remove galactose residues from guar galactomannan (GG), a heteropolymer consisting of polymannan backbone with alternating galactose as single-residue side-chain stubs. The enzyme showed maximum activity at pH 4.5 and 45 degrees C and exhibited Michaelis-Menten kinetics with a K(m) and V(max) of 6.0 mg mL(-1) and 1820 nmol min(-1) mg(-1), respectively. The native and modified GG had a viscosity of 4800 and 3800 cps, respectively. The molecular mass of the enzyme-treated GG varied between 152 +/- 0.5 kDa, and its GLC analysis revealed a significant change in galactose-mannose content of 1:3.8, respectively, similar to that of locust bean gum (LBG). FTIR and solid-state CP-MASS (13)C NMR analyses indicated subtle changes in the conformation of modified GG because of the removal of galactose residues. Gel-strength measurements with kappa-carrageenan showed an improvement in the gelling behavior, similar to that shown by LBG. Debranching of GG by pullulanase is an alternative and inexpensive route to produce modified GG with enhanced functional properties, as a cost-effective replacement for LBG.

Preparation and Surface Modification of Poly(acrylonitrile-co-acrylic acid) Electrospun Nanofibrous Membranes

Poly(acrylonitrile-co-acrylic acid) (PANCAA) was synthesized and fabricated into nanofibrous membranes by an electrospinning technique. Scanning electron microscopy revealed that membranes composed of uniformly thin and smooth nanofibres were obtained under optimized processing parameters. Surface modification with chitosan on these nanofibrous membranes was accomplished by a coupling reaction between the carboxylic groups of PANCAA and the primary amino groups of chitosan. Fluorescent labelling, weight measurement, FT-IR/ATR spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used to confirm the modification process and determine the immobilization degree of chitosan. Platelet adhesion experiments were further carried out to evaluate the hemocompatibility of the studied nanofibrous membranes. Preliminary results indicated that the immobilization of chitosan on the PANCAA nanofibrous membranes was favourable for platelet adhesion.

Enzymatic desorption of layer-by-layer assembled multilayer films and effects on the release of encapsulated indomethacin microcrystals

Polyelectrolyte multilayer films were prepared through layer-by-layer (LbL) self-assembly of chitosan (CHI) and pyrene labeled poly(2-acrylamido-2-methylpropanesulfonic acid) (APy). After incubation in an enzyme pepsin solution, multilayer films were partially destroyed as detected by a decrease in fluorescence intensity due to enzymatic degradation of CHI and desorption of APy. The multilayer desorption rate was the highest at pH 4.0. Increasing temperature from 20 degrees C to 60 degrees C accelerated desorption. The enzymatic desorption was also observed from microcapsule walls made of CHI/alginate (ALG) multilayer films directly deposited on indomethacin (IDM) microcrystals by LbL self-assembly. After pepsin erosion, the IDM release from the microcapsule monitored by UV absorbance was obviously accelerated due to desorption. The influence of incubation time, pH, and temperature of the pepsin solution on the IDM release was investigated. The release rate was the fastest after incubation in the pepsin solution at pH 4.0 due to the highest activity of pepsin. Increasing incubation temperature from 20 degrees C to 60 degrees C, however, slowed down the release rate, which was considered to be due to the formation of more perfect and compact multilayer films through the chain rearrangement at higher temperatures. The CHI/ALG multilayer film was found to maintain its barrier function to the IDM diffusion even after 6-h incubation in the pepsin solution.