Effect of Enzymatic Hydrolysis on Native Starch Granule Structure

Structures, gelatinization properties and enzyme hydrolyses of starches from transparent and floury grains of rices subjected to field natural extreme high temperature

Three rice varieties underwent the field natural extreme high temperature (EHT) with daily average temperature over 30 °C from 21 to 89 days after sowing, and had transparent, chalky and floury grains. The structures, gelatinization properties and enzyme hydrolyses of starches from transparent and floury grains were investigated. Compared with control transparent grains, floury grains subjected to EHT markedly decreased the contents of amylose molecules, amylopectin A chains and amylopectin B1 chains and increased the contents of amylopectin B2 and B3+ chains and the average branch-chain length of amylopectin. Both transparent and floury grains had A-type starches, but floury grain starches exhibited higher relative crystallinity, gelatinization temperature, retrogradation and pasting viscosities than transparent grain starches. Floury grain starches had lower hydrolysis rates than transparent grain starches. Native starches were more resistant to digestion but gelatinized and retrograded starches were more prone to digestion in floury grains than in transparent grains.

Investigation of the link between first-order kinetic models of the in vitro digestion of native starches and the accompanying changes in their crystallinity and structure

Starch is the main source of dietary energy for humans. In order to understand the mechanisms governing native starch in vitro digestion, digestion data for six starches [wheat, maize, (waxy) maize, rice, potato and pea] of different botanical sources were fitted with the most common first-order kinetic models, i.e. the single, sequential, parallel and combined models. Parallel and combined models provided the most accurate fits and showed that all starches studied except potato starch followed a biphasic in vitro digestion pattern. The biological relevance of the kinetic parameters was explored by determining changes in crystallinity and molecular structure of the undigested starch residues during in vitro digestion. While the crystallinity of the undigested potato starch residues did not change substantially, a respectively small and large decrease in their amylose content and chain length during in vitro digestion was observed, indicating that amylose was digested slightly preferentially over amylopectin in native starch. However, the molecular structure of the starch residues changed too slowly and/or only to an insufficient extent to relate it to the kinetic parameters of the digested fractions predicted by the models. Such parameters thus need to be interpreted with caution, as their biological relevance still needs to be proven.

Deuteration of non-labile protium in starch: Biosynthesis and characterisation from yeast-derived starch granules

Deuterium labelling of the non-labile protium atoms in starch granules has been achieved for the first time, by growing genetically modified yeast on deuterated media. Mass spectrometry of the glucose monomers from digested starch showed 44 % average deuteration of the non-labile protium when grown on partially deuterated raffinose (with average deuteration 48 %); yielding starch with 26 % average overall deuteration. Non-labile deuteration was also demonstrated using D2O solvent in the culture medium. Solid-state NMR revealed that deuteration was not evenly distributed across the monomer, being highest at the C6 carbon and lowest at the C1 carbon. SANS revealed two structural features at q = 0.05 Å-1 and 0.4 Å-1, the first corresponding to a lamellar repeat of approximately 12-13 nm while the latter is consistent with B-type crystalline polymer packing. Furthermore, solvent contrast variation SANS analysis yielded a contrast match point of 66 mol% D2O indicative of approximately 30-35 % average deuteration of the bulk granules, consistent with mass spectroscopy. When coupled with the more traditional process of exchange of labile protium in the hydroxyl groups by D2O solvent exchange, the biosynthesis of highly deuterated starch opens new opportunities for neutron scattering experiments involving multicomponent starch-based systems.

Ultrasound and enzyme treatments on morphology, structures, and adsorption properties of cassava starch

Porous starch materials are environmentally friendly and renewable and exhibit high adsorption performances. Ultrasound and compound enzyme (α-amylase and glucoamylase) treatments were applied to prepare modified cassava starch. The granules, crystal morphology, crystal structure, and molecular structure of starch were investigated. The hydrolysis degree, solubility, swelling, and adsorption properties of cassava starch were analyzed. After the cassava starch was modified by ultrasound and enzyme treatments, the granule size of the starch decreased, and the surfaces were eroded to form pits, grooves and cavity structure. The starch spherulites weakened or even disappeared. The functional groups of starch did not change significantly, but the degree of crystal order decreased. The double-helix structure was reduced, and the crystal structure was composed of A + V-type crystals, with a decrease in crystallinity. The gelatinization temperature and thermal degradation temperatures enhanced. The enzymatic hydrolysis degree and solubility of the modified cassava starch increased. The swelling degree decreased, and oil adsorption, water adsorption improved. MB adsorption behavior of modified cassava starch closely followed a pseudo-second-order kinetics model and the Langmuir isotherm equation. These findings could help to understand the relationship between the structure and properties of modified starch, and guide its application in the field of adsorption.

The evolution of granular surface structure and functional properties in rice starch during grain filling

The developmental changes in the granular surface structure and functional properties of starch during the entire grain filling period of rice (around 40 days) were investigated. The specific surface area of rice starch significantly decreased firstly then stabilized during growth due to increasing granular size. The pore volume decreased from 5.40 cm3/g at 6th day after anthesis (DAA-6) to 3.02 cm3/g (DAA-46). More starch granule-associated proteins (SGAPs) accumulated on the surface and in channels. Swelling power decreased by 46 %, whereas the flow behavior index (n) decreased by 32 % in upward curve during starch development from DAA-6 to DAA-30. Tan δ first dropped then remained steady at DAA 22-34 and lightly rebounded at the final stage, indicating that starch in the middle stage tended to have greater viscoelastic gel behavior at all sweeps. Mature starch showed lower in vitro hydrolysis rate and exhibited stronger enzymatic resistance. The results showed that granular surface features of rice starch may be an essential factor in determining rheological behavior and resistance to hydrolysis.

Changes in rheology and components during the processing of Chinese traditional handmade hollow dried noodle

The study of the changes in rheological properties and components during the processing of Chinese traditional handmade hollow dried noodle (HHDN) is essential to explaining the excellent quality of HHDN. The dynamic oscillation frequency sweep, stress relaxation, and uniaxial extension characteristics of the dough after kneading, stretching, and resting were investigated at six sampling points during the processing of HHDN. The result showed that stretching led to an increase in G' and G0, and a significant decrease (P < 0.05) in extensibility from 131.02 mm to 57.99 mm. Confocal laser scanning microscopy (CLSM) was used to observe the microstructure of the gluten network, which was destroyed during stretching and restored during resting. Studies of changes in components showed that the stretching process resulted in a decrease in GMP content from 3.24 (g/100 g) to 3.18 (g/100 g), and the resting process resulted in β-sheets decreasing significantly (P < 0.05). The degree of starch pasting increased significantly (P < 0.05) after stretching. The results of the correlation analysis showed that components changes were highly correlated with the rheological properties during the processing of HHDN.

Comparative analysis of granular starch hydrolysis and multi-structural changes by diverse α-amylases sources: Insights from waxy rice starch

Three cultivars of waxy rice starch with different multi-scale structures were subjected to α-amylase hydrolysis to determine amylopectin fine structure, production of oligosaccharides, morphology, and crystallinity of the partially hydrolyzed starch granules. α-amylases hydrolyzed the amylopectin B2 chain during the initial stage of hydrolysis, suggesting that it is primarily located in the outer shell of the granules. For waxy rice starch with loose structure, α-amylases attacked the crystalline and amorphous regions simultaneously in the initial stage, while for starch granules with compact structure, the outer shell blocklet (crystalline structure) can be a hurdle for α-amylases to proceed to hydrolysis of the internal granule structure. The ability of α-amylases from porcine pancreatic α-amylases to attack the outer shell crystalline structure was lower than that of α-amylases from Bacillus amyloliquefaciens and Aspergillus oryzae. These results show that α-amylase source and rice cultivar combinations can be used to generate diverse structures in degraded waxy rice starch.

Effect of endogenous protein and lipid removal on the physicochemical and digestion properties of sand rice (Agriophyllum squarrosum) flour

The study investigated the effect of removing protein and/or lipid on the physicochemical characteristics and digestibility of sand rice flour (SRF). Morphological images showed that protein removal had a greater impact on exposing starch granules, while lipids acted as an adhesive. The treatment altered starch content in SRF samples, leading to increased starch crystallinity, denser semi-crystalline region, lower onset gelatinization temperature (To), higher peak viscosity and gelatinization enthalpy (ΔH), where Protein removal showed a more pronounced effect on altering physicochemical properties compared to lipid removal. The research revealed a positive correlation between rapidly digestible starch (RDS), maximum degree of starch hydrolysis (C∞), digestion rate constant (k) values and 1047/1022 cm-1 ratio, showing a strong connection between short-range structure and starch digestibility. The presence of endogenous proteins and lipids in SRF hinder digestion by restricting starch swelling and gelatinization, and physically obstructing enzyme-starch interaction. Lipids had a greater impact on starch digestibility than proteins, possibly due to their higher efficacy in reducing digestibility, higher lipid content with greater potential to form starch-lipid complexes. This study provides valuable insights into the interaction between starch and proteins/lipids in the sand rice seed matrix, enhancing its applicability in functional and nutritional food products.

Structural characteristics, digestion properties, fermentation properties, and biological activities of butyrylated starch: A review

Butyrylated starch is produced by the esterification of hydroxyl groups in starch with butyryl groups, which improves the structural diversity of starch and expands its function and biological activity. The paper summarizes the structural properties and digestive properties, fermentation properties, and biological activities of butyrylated starch and describes the conformational relationships generated by the butyryl groups to reveal the underlying mechanisms. The butyryl groups replace the hydroxyl groups in starch and break the hydrogen bonds, which consequently changes the molecular, crystal, and granular structures of starch, while the starch structure also affects the distribution of the butyryl groups. Binding to the butyryl groups gives starch efficacy in resisting digestion, lowering the glycaemic index, releasing butyric acid in the colon, and regulating intestinal flora and metabolites. Relationships between starch structural parameters and butyric acid production and intestinal flora were also concluded to provide guidance for the rational design of butyrylated starch to improve efficacy. Moreover, based on its digestive and fermentation properties, butyrylated starch has exhibited good therapeutic efficacy for intestinal diseases, diabetes, polycystic ovary syndrome, and chronic restraint stress-induced abnormalities. This review provides a valuable reference for butyrylated starch advancement and utilization.

The multi-scale structures and in vitro digestibility of starches with different crystalline types induced by dielectric barrier discharge plasma

The effects of plasma treatment on multi-scale structures and in vitro digestibility of starches isolated from Tartary buckwheat (TBS), potato (PTS), and pea (PS), were investigated. The results from SEM and CLSM showed that plasma treatment resulted in the extension of pores from the starch hilum to the surface. The XRD and 13C CP/MAS NMR spectra demonstrated that the crystalline type of three starches was not changed by plasma treatment, while the RC and double helix content of TBS increased. Besides, the single helix content and the proportion of amorphous phase decreased following the treatment, which was consistent with the result of SAXS. However, the PTS and PS showed the opposite results by plasma treatment. In addition, the modification significantly changed the molecular weight (Mw) and chain length distribution of all the starches, among which the Mw of PTS fell drastically from 2.45 × 107 g/mol to 1.74 × 107 g/mol. The in vitro digestibility of starches increased significantly when treated with plasma, in which TBS exhibited the biggest increase for its inside-out and side-by-side digestion manners. Therefore, plasma treatment led to different alteration trends for multi-scale structures with quite various change extent for in vitro digestibility about different crystalline starches.

Dielectric barrier discharge cold plasma modifies the multiscale structure and functional properties of banana starch

Banana starch has attracted significant attention due to its abundant content of resistant starch. This study aims to compare the multiscale structure and functional properties of banana starch obtained from five cultivated varieties and investigate the impact of dielectric barrier discharge cold plasma (DBD) treatment on these starch characteristics. All five types of natural banana starch exhibited an elliptical and irregular shape, conforming to the CB crystal structure, with a bimodal distribution of branch chain lengths. The resistant starch content ranged from 88.9 % to 94.1 %. Variations in the amylose content, amylopectin branch chain length distribution, and structural characteristics resulted in differences in properties such as gelatinization behavior and sensitivity to DBD treatment. The DBD treatment inflicted surface damage on starch granules, reduced the amylose content, shortened the amylopectin branch chain length, and changed the relative crystallinity to varying degrees. The DBD treatment significantly increased starch solubility and light transmittance. Simultaneously, it resulted in a noteworthy decrease in peak viscosity and gelatinization enthalpy of starch paste. The in vitro digestibility test showed that 76.2 %-86.5 % of resistant starch was retained after DBD treatment. The DBD treatment renders banana starch with reduced viscosity, increased paste transparency, enhanced solubility, and broadens its potential application.

Altering structure and enzymatic resistance of high-amylose maize starch by irradiative depolymerization and annealing with palmitic acid as V-type inclusion compound

This study explored a new physical modification approach to regulate enzymatic resistance of high-amylose starch for potentially better nutritional outcomes. High-amylose maize starch (HAMS) was subjected to chain depolymerization by electron beam irradiation (EBI), followed by inducing ordered structure through annealing in palmitic acid solution (APAS). APAS treatment significantly promotes the formation of ordered structure. Starch after the combinative modification showed up to 5.2 % increase in total crystallinity and up to 1.2 % increase in V-type fraction. The EBI-APAS modification led to increased gelatinization temperature (from 66.1 to 87.6 °C) and reduced final digested percentage under in vitro stimulated digestion conditions. The moderate extent of depolymerization resulted in higher enzymatic resistance, indicating that the extent of depolymerization is crucial in EBI-APAS modification. Pearson analysis showed a significant correlation between gelatinization onset temperature and digestion kinetic parameter (k1, rate constant of fast-phase digestion). Overall, the result suggests that ordered structures of degraded molecules induced by the combinative modification contribute to the enzymatic resistance of starch. This study sheds lights on future applications of EBI-APAS approach to regulate multi-scale structures and nutritional values of high-amylose starch.

Granular architecture of lotus seed starch and its impact on physicochemical properties

Lotus seed starch has high apparent amylose content (AAM). A representative definition of its granular architecture (e.g., lamellar structure) remained absent. This study defined the granular shape, crystalline and lamellar structures, and digestibility of twenty-two samples of lotus seed starch (LS) by comparing with those of potato and maize starches. LS granules had more elongated shape and longer repeat distance of lamellae than potato and maize starch granules. The enzymatic susceptibility of LS granules was more affected by AAM than granular architecture. Using these LSs as a model system, the relationships between lamellar structure of starch granules and properties of their gelatinized counterparts were investigated. In LSs, thinner amorphous lamella and thicker crystalline lamella were associated with higher swelling power and yield stress. The relationships were found to be connected via certain structural characteristics of amylopectin.

Enzyme immobilization technology as a tool to innovate in the production of biofuels: A special review of the Cross-Linked Enzyme Aggregates (CLEAs) strategy

This review emphasizes the crucial role of enzyme immobilization technology in advancing the production of two main biofuels, ethanol and biodiesel, with a specific focus on the Cross-linked Enzyme Aggregates (CLEAs) strategy. This method of immobilization has gained attention due to its simplicity and affordability, as it does not initially require a solid support. CLEAs synthesis protocol includes two steps: enzyme precipitation and cross-linking of aggregates using bifunctional agents. We conducted a thorough search for papers detailing the synthesis of CLEAs utilizing amylases, cellulases, and hemicellulases. These key enzymes are involved in breaking down starch or lignocellulosic materials to produce ethanol, both in first and second-generation processes. CLEAs of lipases were included as these enzymes play a crucial role in the enzymatic process of biodiesel production. However, when dealing with large or diverse substrates such as lignocellulosic materials for ethanol production and oils/fats for biodiesel production, the use of individual enzymes may not be the most efficient method. Instead, a system that utilizes a blend of enzymes may prove to be more effective. To innovate in the production of biofuels (ethanol and biodiesel), enzyme co-immobilization using different enzyme species to produce Combi-CLEAs is a promising trend.

Starch granules and their size distribution in wheat: Biosynthesis, physicochemical properties and their effect on flour-based food systems

Starch is a vital component of wheat grain and flour, characterized by two distinct granule types: A-type starch (AS) with granules larger than 10 µm in diameter, and B-type starch (BS) with granules measuring no more than 10 µm in diameter. This review comprehensively evaluates the isolation, purification, and biosynthesis processes of these types of granules. In addition, a comparative analysis of the structure and properties of AS and BS is presented, encompassing chemical composition, molecular, crystalline and morphological structures, gelatinization, pasting and digestive properties. The variation in size distribution of granules leads to differences in physicochemical properties of starch, influencing the formation of polymeric proteins, secondary and micro-structures of gluten, chemical and physical interactions between gluten and starch, and water absorption and water status in dough system. Thus, starch size distribution affects the quality of dough and final products. In this review, we summarize the up-to-date knowledge of AS and BS, and propose the possible strategies to enhance wheat yield and quality through coordinated breeding efforts. This review serves as a valuable reference for future advancements in wheat breeding.

Application of small angle scattering (SAS) in structural characterisation of casein and casein-based products during digestion

In recent years, small and ultra-small angle scattering techniques, collectively known as small angle scattering (SAS) have been used to study various food structures during the digestion process. These techniques play an important role in structural characterisation due to the non-destructive nature (especially when using neutrons), various in situ capabilities and a large length scale (of 1 nm to ∼20 μm) they cover. The application of these techniques in the structural characterisation of dairy products has expanded significantly in recent years. Casein, a major dairy protein, forms the basis of a wide range of gel structures at different length scales. These gel structures have been extensively researched utilising scattering techniques to obtain structural information at the nano and micron scale that complements electron and confocal microscopy. Especially, neutrons have provided opportunity to study these gels in their natural environment by using various in situ options. One such example is understanding changes in casein gel structures during digestion in the gastrointestinal tract, which is essential for designing personalised food structures for a wide range of food-related diseases and improve health outcomes. In this review, we present an overview of casein gels investigated using small angle and ultra-small angle scattering techniques. We also reviewed their digestion using newly built setups recently employed in various research. To gain a greater understanding of micro and nano-scale structural changes during digestion, such as the effect of digestive juices and mechanical breakdown on structure, new setups for semi-solid food materials are needed to be optimised.

The alterations in granule, shell, blocklets, and molecular structure of pea starch induced by ultrasound

Understanding the alterations to starch multi-scale structure induced by ultrasound treatment can help in determining the effective application of ultrasound in functional-starch preparation. This study aimed to comprehensively characterize and understand the morphological, shell, lamellae, and molecular structures of pea starch granules treated by ultrasound under different temperatures. Scanning electron microscopy and X-ray diffraction analyses showed that UT (ultrasound treatment) did not change C-type of crystalline, but caused a pitted surface and endowed a looser structure and higher enzyme susceptibility as the temperature increased above 35 °C for pea starch granules. Fourier transform infrared spectroscopy and small-angle X-ray scattering analyses revealed that UT reduced the short-range ordering and increased the thickness of semi-crystalline and amorphous lamellae by inducing starch chain depolymerization, which was manifested by molecule weight and chain length distribution analysis. The sample ultrasound-treated at 45 °C had the higher proportion of B2 chains compared with the other ultrasound-treated samples because the higher ultrasonic temperature altered the disruption sites of starch chains.

Understanding the multi-scale structure and physicochemical properties of millet starch with varied amylose content

The multi-scale structure and physicochemical properties of starch from five indigenous millet varieties were investigated and their correlations were revealed. Results showed that apparent amylose content (AAC) ranged from 12.3% to 27.4%, and as the amylose increasing, the ordered degree of starch double-helical, ordered molecular structure and crystalline structures displayed a declined trend. All millet starches showed polygonal, spherical or irregular shapes varied with size, but XIN-3 starch granules (highest AAC) presented higher granule rigidity, compactness and bulk intensity. Specifically, the ordered molecular structure (e.g., higher double-helix content, short-range ordered degree and relative crystallinity) of millet starch with low amylose limited the swelling degree of starch granules and in turn decreased the characteristic viscosity. However, rapidly digestible starch (RDS) was significantly negatively correlated with AAC and ordered molecular structure. The information obtained in this study would be significant in the rational utilization of these millet starches in food industry fields.

Multi-Scale Structural Insights into Enzymatically Hydrolyzed Lentil Starch Concentrates Prepared by In Vitro Method Using Different Types of Enzymes

This study was undertaken to investigate the enzymatic hydrolysis of lentil starch concentrates from conventional cooked seeds (CCLSC) by the action of different types of enzymes, including pancreatin (PC-EHSC), heat-stable α-amylase (HS-EHSC), β-amylase (βA-EHSC), amyloglucosidase (AMG-EHSC), and multi-enzymes (βA-HS-AMG-EHSC); their multi-scale structural characteristics of the enzymatic hydrolysis products of lentil starch concentrates were compared. The morphological features distinguished among different samples. The Fourier-transform infrared spectroscopy and solid-state ¹³C CP/MAS NMR spectral features indicated the possible formation of a binary and ternary complex among amylose, protein and lipids. The X-ray diffraction results revealed that the V-type characteristic diffraction peaks were more obvious for samples including PC-EHSC and βA-EHSC, which was in line with their lowest polydispersity index (DP_n). PC-EHSC and βA-EHSC also showed an increased peak intensity of the scattering maximum on the small-angle X-ray scattering spectra, whereas CCLSC exhibited an overall lower peak intensity within the studied q range of scattering. The highest XRD crystallinity and the lowest DP_n value obtained for PC-EHSC indicated that the starch polymers modified by pancreatin could produce glucan chains with a comparatively homogenous M_w distribution that are readily recrystallized by hydrogen bonding through chain aggregation. Comparatively, the lowest relative crystallinity for HS-EHSC obtained from XRD suggested that thermostable α-amylolysis was unfavorable for the formation of starch structure with a higher degree of molecular order. This study could provide useful information for the needed research to obtain a deeper understanding of the impact of different amylolysis actions on the structural organization of starch hydrolysates and to provide a theoretical foundation for the development of fermentable enzymatically hydrolyzed starch with well-tailored physiological properties.

Changes in Structural and Thermodynamic Properties of Starch during Potato Tuber Dormancy

The main reserve polysaccharide of plants-starch-is undoubtedly important for humans. One of the main sources of starch is the potato tuber, which is able to preserve starch for a long time during the so-called dormancy period. However, accumulated data show that this dormancy is only relative, which raises the question of the possibility of some kind of starch restructuring during dormancy periods. Here, the effect of long-term periods of tuber rest (at 2-4 °C) on main parameters of starches of potato tubers grown in vivo or in vitro were studied. Along with non-transgenic potatoes, Arabidopsis phytochrome B (AtPHYB) transformants were investigated. Distinct changes in starch micro and macro structures-an increase in proportion of amorphous lamellae and of large-sized and irregular-shaped granules, as well as shifts in thickness of the crystalline lamellae-were detected. The degree of such alterations, more pronounced in AtPHYB-transgenic tubers, increased with the longevity of tuber dormancy. By contrast, the polymorphic crystalline structure (B-type) of starch remained unchanged regardless of dormancy duration. Collectively, our data support the hypothesis that potato starch remains metabolically and structurally labile during the entire tuber life including the dormancy period. The revealed starch remodeling may be considered a process of tuber preadaptation to the upcoming sprouting stage.

Interfacial Catalysis during Amylolytic Degradation of Starch Granules: Current Understanding and Kinetic Approaches

Enzymatic hydrolysis of starch granules forms the fundamental basis of how nature degrades starch in plant cells, how starch is utilized as an energy resource in foods, and develops efficient, low-cost saccharification of starch, such as bioethanol and sweeteners. However, most investigations on starch hydrolysis have focused on its rates of degradation, either in its gelatinized or soluble state. These systems are inherently more well-defined, and kinetic parameters can be readily derived for different hydrolytic enzymes and starch molecular structures. Conversely, hydrolysis is notably slower for solid substrates, such as starch granules, and the kinetics are more complex. The main problems include that the surface of the substrate is multifaceted, its chemical and physical properties are ill-defined, and it also continuously changes as the hydrolysis proceeds. Hence, methods need to be developed for analyzing such heterogeneous catalytic systems. Most data on starch granule degradation are obtained on a long-term enzyme-action basis from which initial rates cannot be derived. In this review, we discuss these various aspects and future possibilities for developing experimental procedures to describe and understand interfacial enzyme hydrolysis of native starch granules more accurately.

Enhancing the Mechanical Properties of Corn Starch Films for Sustainable Food Packaging by Optimizing Enzymatic Hydrolysis

The objective of this study was to investigate the effects of enzymatic hydrolysis using α-amylase from Bacillus amyloliquefaciens on the mechanical properties of starch-based films. The process parameters of enzymatic hydrolysis and the degree of hydrolysis (DH) were optimized using a Box-Behnken design (BBD) and response surface methodology (RSM). The mechanical properties of the resulting hydrolyzed corn starch films (tensile strain at break, tensile stress at break, and Young's modulus) were evaluated. The results showed that the optimum DH for hydrolyzed corn starch films to achieve improved mechanical properties of the film-forming solutions was achieved at a corn starch to water ratio of 1:2.8, an enzyme to substrate ratio of 357 U/g, and an incubation temperature of 48 °C. Under the optimized conditions, the hydrolyzed corn starch film had a higher water absorption index of 2.32 ± 0.112% compared to the native corn starch film (control) of 0.81 ± 0.352%. The hydrolyzed corn starch films were more transparent than the control sample, with a light transmission of 78.5 ± 0.121% per mm. Fourier-transformed infrared spectroscopy (FTIR) analysis showed that the enzymatically hydrolyzed corn starch films had a more compact and solid structure in terms of molecular bonds, and the contact angle was also higher, at 79.21 ± 0.171° for this sample. The control sample had a higher melting point than the hydrolyzed corn starch film, as indicated by the significant difference in the temperature of the first endothermic event between the two films. The atomic force microscopy (AFM) characterization of the hydrolyzed corn starch film showed intermediate surface roughness. A comparison of the data from the two samples showed that the hydrolyzed corn starch film had better mechanical properties than the control sample, with a greater change in the storage modulus over a wider temperature range and higher values for the loss modulus and tan delta, indicating that the hydrolyzed corn starch film had better energy dissipation properties, as shown by thermal analysis. The improved mechanical properties of the resulting film of hydrolyzed corn starch were attributed to the enzymatic hydrolysis process, which breaks the starch molecules into smaller units, resulting in increased chain flexibility, improved film-forming ability, and stronger intermolecular bonds.

Removing starch granule-associated surface lipids affects structure of heat-moisture treated hull-less barley starch

The effects of starch granule-associated surface lipids removal on hull-less barley starch structure formed by heat-moisture treatment were investigated. Removing surface lipids made the peak at 2θ of 13^° disappear and resulted in higher lamellar peak intensity after harsh treatment and a lower reduction in mass fractal dimension (from 2.49 to 2.43) and radius of gyration (from 24.3 to 24.0) when temperature increased from 100 to 120 °C at 20 % moisture. Treatment at 25 % moisture and 120 °C decreased relative crystallinity (from 15.73 % to 7.43 %) and Gaussian peak area (from 646.7 to 137.7) of native starch, and decreased relative crystallinity (from 14.24 % to 12.56 %) and Gaussian peak area (from 604.1 to 539.6) for starch without surface lipids. Different trends of change in lamellar thickness, linear crystallinity, peak temperatures, and enthalpy of gelatinization were observed among modified starches with increasing temperature and/or moisture content. These results demonstrate that removing surface lipids changes structure of heat-moisture treated starch.

Designing liquefaction and saccharification processes of highly concentrated starch slurry: Challenges and recent advances

Starch-based sugars are an important group of starch derivatives used in food, medicine, chemistry, and other fields. The production of starch sugars involves starch liquefaction and saccharification processes. The production cost of starch sugars can be reduced by increasing the initial concentration of starch slurry. However, the usage of the highly concentrated starch slurry is characterized by challenges such as low reaction efficiency and poor product performance during the liquefaction and saccharification processes. In this study, we endeavored to provide a reference guide for improving high-concentration starch sugar production. Thus, we reviewed the effects of substrate concentration on the starch sugar production process and summarized several potential strategies. These regulation strategies, such as physical field pretreatment, complex enzyme-assisted, and temperature control, can significantly increase the starch concentration and mitigate the challenges of using highly concentrated starch slurry. We believe that highly concentrated starch sugar production will achieve a qualitative leap in the future. This review provides theoretical guidance and highlights the importance of high concentration in starch-based sugar production. Further studies are needed to explore the fine structure and enzyme attack mode during the liquefaction and saccharification processes to regulate the production of more targeted products.

Microstructures of Starch Granules with Different Amylose Contents and Allomorphs as Revealed by Scattering Techniques

In this study, as-is (ca. 12% moisture by mass) and hydrated (50% water by mass) granules of waxy potato (WP), waxy wheat (WW), waxy maize, normal maize, and high-amylose maize (HAM) starches were investigated by using small-angle neutron and X-ray scattering (SANS and SAXS), wide-angle X-ray scattering, and ultra-small-angle neutron scattering. The SANS and SAXS data were fitted using the two-phase stacking model of alternating crystalline and amorphous layers. The partial crystalline lamellar structures inside the growth rings of granules were analyzed based on the inter-lamellar distances, thicknesses of the crystalline lamellae and amorphous layers, thickness polydispersities, and water content in each type of layer. Despite having a longer average chain length of amylopectin, the WP and HAM starches, which had B-type allomorph, had a shorter inter-lamellar distance than the other three starches with A-type allomorph. The WP starch had the most uniform crystalline lamellar thickness. After hydration, the amorphous layers were expanded, resulting in an increase of inter-layer distance. The low-angle intensity upturn in SANS and SAXS was attributed to scattering from interfaces/surfaces of larger structures, such as growth rings and macroscopic granule surfaces. Data analysis methods based on model fitting and 1D correlation function were compared. The study emphasized─owing to inherent packing disorder inside granules─that a comprehensive analysis of different parameters was essential in correlating the microstructures with starch properties.

Effect of autoclave-cooling cycles combined pullulanase on the physicochemical and structural properties of resistant starch from black Tartary buckwheat

A starch-rich portion is produced as a by-product of black Tartary buckwheat processing. The effect of enzymatic combined with autoclaving-cooling cycles (one, two, or three times) on the physicochemical and structural properties of black Tartary buckwheat type 3 resistant starch (BRS) was evaluated. The autoclaving-cooling cycles enhanced solubility and reduced swelling, with the BRS content increasing from 14.12% to 25.18%. The high crystallinity of the BRS reflected a high molecular order. However, increasing the number of autoclaving-cooling cycles did not result in higher BRS content. The highest BRS yield in the autoclaved starch samples was 25.18% after double-autoclaving-cooling cycles. Furthermore, the autoclaving-cooling cycles altered the crystalline structure of black Tartary buckwheat, and the subsequent crystallinity changed from 36.33% to 42.05% to 38.27%. Fourier-transform infrared spectroscopy shows that the number of cycles results in more efficient double-helical packing within the crystalline lamella. Principal component analysis showed that the autoclaving-cooling cycle treatment leads to significant changes in the molecular structure of resistant starch (RS). These results indicated that autoclaving-cooling cycles might be a feasible way for producing RS from black Tartary buckwheat starch with better structural stability to expand their application range.

Extrusion puffing pretreated cereals for rapid production of high-maltose syrup

•

Extrusion puffing of cereals improved their water solubility and gelatinization.

•

FTIR-ATR study revealed structural differences between native and puffed cereals.

•

Extrusion puffing highly enhanced the efficiency of saccharification.

•

The extruded-puffed cereals had a higher V_max/K_m value as compared to native.

•

Extruded-puffed cereals showed potential for high-maltose syrup production.

In this study, cereals with high starch content, including brown rice, corn, and buckwheat were pretreated by extrusion. The physicochemical properties of extruded-puffed cereals obtained from different extrusion conditions were analyzed herein. The puffed extrudates exhibited lower bulk density, higher water solubility and gelatinization as compared to untreated cereals. The FTIR-ATR results confirmed a decrease in the crystalline structure of extruded-puffed cereals. A higher V_max/K_m value was observed in the enzymatic saccharification of puffed extrudates that significantly improved hydrolysis rate and yield. Finally, the high-maltose syrup was produced via the enzymatic hydrolysis of extruded-puffed cereals at high substrate concentrations (20 %). After hydrolysis for 180 min at an enzyme substrate ratio (E/S ratio) of 0.2, the syrup with dextrose equivalent (DE) value of 63, 62, and 61 were obtained from extruded-puffed brown rice, corn, and buckwheat, respectively. Our results showed the potential of using extruded-puffed cereals for producing high-maltose syrup.

Effect of enzymatic hydrolysis on digestibility and morpho-structural properties of hydrothermally pre-treated red rice starch

The objective of this work was to evaluate the effects of enzymatic hydrolysis on digestibility and morphological and structural properties of hydrothermally pre-treated (HPT) red rice starch. The pre-treatments were performed in autoclave and cooking for the modification of rice grains and native starch. In vitro starch digestibility was performed consecutively and semi-simultaneously using α-amylase and amyloglucosidase. A first-order mathematical model was used to adjust the hydrolysis kinetic data, which made it possible to calculate the surface area, hydrolysis index, and glycemic index of the starch. Scanning electron microscopy images (SEM), Fourier transform infrared (FTIR) spectra and X-ray diffraction (XRD) were also performed to investigate the characteristics of the post-hydrolysis starch samples. The autoclaved starch HSS-A3, which was subjected to 121 °C/1.08 bar for 10 min, showed the highest in vitro digestibility values (80.08 %). Both starch samples showed increase of particle size and enzymatic digestibility after HPT. FTIR spectra of the starch samples showed that there was no appearance of new functional groups. However, XRD evidenced that HPT changed the intensity of the peaks and the type of crystallinity was changed for autoclaved starch (A3) from type A to Vh, with crystallinity ranging from 21.71 % to 26.42 %. The semi-simultaneous approach showed more advantages due to the highest in vitro digestibility as well as reducing the processing time and use of reagents.

Building blocks of β-sitosterol-γ-oryzanol gels revealed by small-angle neutron scattering and real space modelling

Mixtures of β-sitosterol and γ-oryzanol form gels in a range of organic solvents. Despite being widely studied, particularly as potential oleogels for food application, details of the intrinsic gel-forming building blocks remain unclear. Small-angle neutron scattering (SANS) combined with solvent contrast variation has been used to evaluate potential structural models. While evidence exists that the building blocks are hollow cylinders (tubules), the simultaneous fitting of twelve contrast-varied SANS data sets indicates that the previously proposed model of double walled tubules is incorrect. Predicted scattering based on real space models provides compelling evidence that the origin of the gelling behaviour is the limited assembly of adjacent tubules to form a space-filling network of fibrils.

Butyl Group Distribution, Intestinal Digestion, and Colonic Fermentation Characteristics of Different Butyrylated Starches

Despite being a promising butyrate carrier, butyrylated starch remains poorly understood in terms of the correlation between starch structure and fermentation characteristics. Herein, three butyrylated starches derived from different botanical sources were prepared with a similar degree of substitution. Raman microscopy and water contact angle analysis suggested that a relatively large proportion of butyl group substitutions occurred within the interior of butyrylated waxy maize starch (B-WMS) granules. In vitro digestion results showed that branch points provided butyl groups with a specific protection from enzymatic hydrolysis, whereas butyl groups significantly increased the resistant starch content of butyrylated starch. Moreover, the porous morphology with less distributed butyl groups on the granular surface contributed to a faster fermentation rate in B-WMS. The current study reveals the influence of botanical origin on butyl group distribution, which in turn plays a pivotal role in regulating the intestinal digestion and colonic fermentation of butyrylated starch.

New definition of resistant starch types from the gut microbiota perspectives - a review

Current definition of resistant starch (RS) types is largely based on their interactions with digestive enzymes from human upper gastrointestinal tract. However, this is frequently inadequate to reflect their effects on the gut microbiota, which is an important mechanism for RS to fulfill its function to improve human health. Distinct shifts of gut microbiota compositions and alterations of fermented metabolites could be resulted by the consumption of RS from the same type. This review summarized these defects from the current definitions of RS types, while more importantly proposed pioneering concepts for new definitions of RS types from the gut microbiota perspectives. New RS types considered the aspects of RS fermentation rate, fermentation end products, specificity toward gut microbiota and shifts of gut microbiota caused by the consumption of RS. These definitions were depending on the known outcomes from RS-gut microbiota interactions. The application of new RS types in understanding the complex RS-gut microbiota interactions and promoting human health should be focused in the future.

Processing, digestion property and structure characterization of slowly digestible gorgon nut starch

Slowly digestible gorgon nut starch (GN-SDS) was prepared by heating-cooling treatment (HCT), meanwhile its morphological and structural features were characterized in detail by SEM, DSC, XRD and IR detection. The optimized parameters of GN-SDS processing were as following: starch milk (20%) was heated at 100 °C for 20 min, and then cooled under 4 °C for 24 h. Under the optimized parameters, the SDS content increased from 20.49 to 61.74%. GN-SDS showed typical SDS characteristics in in vivo digestion with a low postprandial blood glucose. SEM images suggested that GN-S particles changed from uniform regular polyhedron with smooth surface to irregular gravel-like particles with coarse surface and obvious layered structure inside after HCT. The results of SEM, DSC, XRD and IR determination indicated that HCT changed the granule morphology, interior structure, gelatinization temperature and crystal type (A to B-type) of GN-S, and therefore made it hard to be digested accordingly.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10068-021-01007-6.

Properties and digestibility of a novel porous starch from lotus seed prepared via synergistic enzymatic treatment

The objective was to investigate the effect of synergistic enzymatic treatment on the properties and digestibility of a novel C-type lotus seed porous starch (LPS). Scanning electron microscopy showed that the densest and most complete pores were formed on the surface of LPS when the concentration of enzymes added was 1.5% (LS-1.5E). With increases in enzyme addition, the oil and water absorption of the porous starch increased and reached maxima at 1.5% of enzyme. Increased in the specific surface area, total pore volume and average pore diameter of LPS were determined by low-temperature nitrogen adsorption, while when the enzymes exceeded 1.5%, there were no significant changes. Compared to lotus seed starch (LS), the particle size of LPS also decreased. With the increases in enzyme addition, LPS exhibited higher relative crystallinity and ordering structure by XRD and FTIR. The results by SAXS confirmed that LPS had higher ordered semi-crystalline lamellar and denser lamellar structure compared to LS. Low-field ¹H NMR spectroscopy indicated that the proportion of bound water in LPS increased, while the proportion of bulk water decreased. Moreover, the degree of hydrolysis of LPS was lower than that of LS, and the content of rapidly digestible starch decreased, while the content of slowly digestible starch and resistant starch increased with the enzyme addition, which was consistent with the structural properties.

Physicochemical Properties of Enzymatically Modified Starches

The physicochemical properties of native, annealed and enzyme-treated chickpea (CP), corn (CS), Turkish bean (TB) and sweet potato (SPS) were investigated. Germinated sorghum extract (GSET) was used as the source of enzymes. Starches were annealed in excess water by holding the slurry at 60 °C for 60 min with or without GSET. The flow curves/rheological data were fitted to the power law, Casson and Herschel–Bulkley models. Starches exhibited shear thinning behavior and a variation in the flow behavior index (n) (0.34–0.82) as a function of the starch type. The consistency index (k) of CP and CS decreased with annealing and GSET treatment but increased for TB and SPS. Annealed and GSET-treated SPS exhibited the highest yield stress compared to the other starches, except for CP. The temperature dependency of all starches was well described by the Arrhenius model (r2 = 0.88–0.99). The activation energy (Ea) values were in the range of 660–5359 (J/mol). The TB exhibited the most Ea and SPS the least. With the exception of SPS, annealing appeared to increase the Ea of all tested starches, but the range of Ea was broader for SPS and CS. Annealed and GSET starches exhibited an increase in the gelatinization temperatures (onset and peak) and a decrease in gelatinization enthalpy (ΔH). The syneresis and water holding capacity decreased after annealing or GSET treatment.