Chemosynthesis of Poly(ε-lysine)-Analogous Polymers by Microwave-Assisted Click Polymerization

Kinetics Conditioning of (Electro) Chemically Stable Zn Anode with pH Regulation Toward Long-Life Zn-Storage Devices

The safety, low cost, and high power density of aqueous Zn-based devices (AZDs) appeal to large-scale energy storage. Yet, the presence of hydrogen evolution reaction (HER) and chemical corrosion in the AZDs leads to local OH- concentration increasement and the formation of ZnxSOy(OH)z•nH2O (ZHS) by-products at the Zn/electrolyte interface, causing instability and irreversibility of the Zn-anodes. Here, a strategy is proposed to regulate OH- by introducing a bio-sourced/renewable polypeptide (ɛ-PL) as a pH regulator in electrolyte. The consumption of OH- species is evaluated through in vitro titration and cell in vivo in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy at a macroscopic and molecular level. The introduction of ɛ-PL is found to significantly suppress the formation of ZHS and associated side reactions, and reduce the local coordinated H2O of the Zn2+ solvation shell, widening electrochemical stable window and suppressing OH- generation during HER. As a result, the inclusion of ɛ-PL improves the cycle time of Zn/Zn symmetrical cells from 15 to 225 h and enhances the cycle time of aqueous Zn- I2 cells to 1650 h compared to those with pristine electrolytes. This work highlights the potential of kinetical OH- regulation for by-product and dendrite-free AZDs.

Imidazole-based Cu(i)-catalyzed click polymerization of diazides and diynes under mild conditions

An efficient imidazole-based Cu(i)-catalyzed azide–alkyne click polymerization under mild reaction conditions was developed.

Effects of Decomplexation Rates on Ternary Gene Complex Transfection with α-Poly(l-Lysine) or ε-Poly(l-Lysine) as a Decomplexation Controller in An Easy-To-Transfect Cell or A Hard-To-Transfect Cell

The tight binding of pDNA with a cationic polymer is the crucial requirement that prevents DNA degradation from undesired DNase attack to safely deliver the pDNA to its target site. However, cationic polymer-mediated strong gene holding limits pDNA dissociation from the gene complex, resulting in a reduction in transfection efficiency. In this study, to control the decomplexation rate of pDNA from the gene complex in a hard-to-transfect cell or an easy-to-transfect cell, either α-poly(l-lysine) (APL) or ε-poly(l-lysine) (EPL) was incorporated into branched polyethylenimine (bPEI)-based nanocomplexes (NCs). Compared to bPEI/pDNA NCs, the addition of APL or EPL formed smaller bPEI-APL/pDNA NCs with similar zeta potentials or larger bPEI-EPL/pDNA NCs with reduced zeta potentials, respectively, due to the different characteristics of the primary amines in the two poly(l-lysine)s (PLs). Interestingly, although both bPEI-APL/pDNA NCs and bPEI-EPL/pDNA NCs showed similar pDNA compactness to bPEI/pDNA NCs, the addition of APL or EPL resulted in slower or faster pDNA release, respectively, from the bPEI-PL/pDNA NCs than from the bPEI/pDNA NCs. bPEI-EPL/pDNA NCs with a decomplexation enhancer (i.e., EPL) improved the transfection efficiency (TE) in both a hard-to-transfect HepG2 cell and an easy-to-transfect HEK293 cell. However, although a decomplexation inhibitor (i.e., APL) reduced the TE of bPEI-APL/pDNA NCs in both cells, the degree of reduction in the TE could be compensated by PL-mediated enhanced nuclear delivery, particularly in HepG2 cells but not HEK293 cells, because both PLs facilitate nuclear localization of the gene complex per its cellular uptake. In conclusion, a decomplexation rate controller could be a potential factor to establish a high TE and design clinically available gene complex systems.

Copper-based ionic liquid-catalyzed click polymerization of diazides and diynes toward functional polytriazoles for sensing applications

An efficient copper-based ionic liquid-catalyzed azide–alkyne click polymerization was developed, and functional polytriazoles were produced which could be used as sensors.

Progress on Catalytic Systems Used in Click Polymerization

Click polymerization, a powerful synthetic technique to construct polymers with unique structures and advanced functions, is of crucial importance in the areas of polymer and material sciences. A variety of click polymerizations such as azide-alkyne, thiol-yne, amino-yne, and hydroxyl-yne reactions have been established, wherein the catalytic systems play an indispensable role in realizing these highly practical reactions based on triple-bond building blocks, as they directly influence the efficiencies of the click polymerizations and the performances of the resultant polymers. The vital employment of catalysts is reviewed and their developments from innovative discoveries to the eminent position are outlined. Moreover, the challenges and perspectives in this area are also briefly discussed.

Recent advances in alkyne-based click polymerizations

The recent progress in alkyne-based click polymerizations and their application in the preparation of new functional polymers are summarized. The challenges and opportunities in this area are also briefly discussed.

Click chemistry improved wet adhesion strength of mussel-inspired citrate-based antimicrobial bioadhesives

For the first time, a convenient copper-catalyzed azide-alkyne cycloaddition (CuAAC, click chemistry) was successfully introduced into injectable citrate-based mussel-inspired bioadhesives (iCMBAs, iCs) to improve both cohesive and wet adhesive strengths and elongate the degradation time, providing numerous advantages in surgical applications. The major challenge in developing such adhesives was the mutual inhibition effect between the oxidant used for crosslinking catechol groups and the Cu(II) reductant used for CuAAC, which was successfully minimized by adding a biocompatible buffering agent typically used in cell culture, 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES), as a copper chelating agent. Among the investigated formulations, the highest adhesion strength achieved (223.11 ± 15.94 kPa) was around 13 times higher than that of a commercially available fibrin glue (15.4 ± 2.8 kPa). In addition, dual-crosslinked (i.e. click crosslinking and mussel-inspired crosslinking) iCMBAs still preserved considerable antibacterial and antifungal capabilities that are beneficial for the bioadhesives used as hemostatic adhesives or sealants for wound management.

Click Cross-Linking-Improved Waterborne Polymers for Environment-Friendly Coatings and Adhesives

Waterborne polymers, including waterborne polyurethanes (WPU), polyester dispersions (PED), and polyacrylate emulsions (PAE), are employed as environmentally friendly water-based coatings and adhesives. An efficient, fast, stable, and safe cross-linking strategy is always desirable to impart waterborne polymers with improved mechanical properties and water/solvent/thermal and abrasion resistance. For the first time, click chemistry was introduced into waterborne polymer systems as a cross-linking strategy. Click cross-linking rendered waterborne polymer films with significantly improved tensile strength, hardness, adhesion strength, and water/solvent resistance compared to traditional waterborne polymer films. For example, click cross-linked WPU (WPU-click) has dramatically improved the mechanical strength (tensile strength increased from 0.43 to 6.47 MPa, and Young's modulus increased from 3 to 40 MPa), hardness (increased from 59 to 73.1 MPa), and water resistance (water absorption percentage dropped from 200% to less than 20%); click cross-linked PED (PED-click) film also possessed more than 3 times higher tensile strength (∼28 MPa) than that of normal PED (∼8 MPa). The adhesion strength of click cross-linked PAE (PAE-click) to polypropylene (PP) was also improved (from 3 to 5.5 MPa). In addition, extra click groups can be preserved after click cross-linking for further functionalization of the waterborne polymeric coatings/adhesives. In this work, we have demonstrated that click modification could serve as a convenient and powerful approach to significantly improve the performance of a variety of traditional coatings and adhesives.

New chemosynthetic route to linear ε-poly-lysine

ε-Poly-lysine (ε-PL) is an uncommon cationic, naturally-occurring homopolymer produced by the fermentation process. Due to its significant antimicrobial activity and nontoxicity to humans, ε-PL is now industrially produced as an additive, e.g. for food and cosmetics. However, the biosynthetic route can only make polymers with a molecular weight of about 3 kDa. Here, we report a new chemical strategy based on ring-opening polymerization (ROP) to obtain ε-PL from lysine. The 2,5-dimethylpyrrole protected α-amino-ε-caprolactam monomer was prepared through cyclization of lysine followed by protection. ROP of this monomer, followed by the removal of the protecting group, 2,5-dimethylpyrrole, ultimately yielded ε-PL with varying molecular weights. The structure of this chemosynthetic ε-PL has been fully characterized by 1H NMR, 13C NMR, and MALDI-TOF MS analyses. This chemosynthetic ε-PL exhibited a similar pKa value and low cytotoxicity as the biosynthetic analogue. Using this new chemical strategy involving ROP without the need for phosgene may enable a more cost effective production of ε-PL on a larger-scale, facilitating the design of more advanced biomaterials.

Modular and orthogonal synthesis of hybrid polymers and networks

Biomaterials scientists strive to develop polymeric materials with distinct chemical make-up, complex molecular architectures, robust mechanical properties and defined biological functions by drawing inspirations from biological systems. Salient features of biological designs include (1) repetitive presentation of basic motifs; and (2) efficient integration of diverse building blocks. Thus, an appealing approach to biomaterials synthesis is to combine synthetic and natural building blocks in a modular fashion employing novel chemical methods. Over the past decade, orthogonal chemistries have become powerful enabling tools for the modular synthesis of advanced biomaterials. These reactions require building blocks with complementary functionalities, occur under mild conditions in the presence of biological molecules and living cells and proceed with high yield and exceptional selectivity. These chemistries have facilitated the construction of complex polymers and networks in a step-growth fashion, allowing facile modulation of materials properties by simple variations of the building blocks. In this review, we first summarize features of several types of orthogonal chemistries. We then discuss recent progress in the synthesis of step growth linear polymers, dendrimers and networks that find application in drug delivery, 3D cell culture and tissue engineering. Overall, orthogonal reactions and modulular synthesis have not only minimized the steps needed for the desired chemical transformations but also maximized the diversity and functionality of the final products. The modular nature of the design, combined with the potential synergistic effect of the hybrid system, will likely result in novel hydrogel matrices with robust structures and defined functions.

Overcoming tumor resistance to cisplatin through micelle-mediated combination chemotherapy

The main obstacles to cancer therapy are the inability to target cancer cells and the acquired drug resistance after a period of chemotherapy. Reduced drug uptake and DNA repair are the two main mechanisms involved in cisplatin resistance. In the present investigation, canthaplatin, a Pt(iv) pro-drug of cisplatin and a protein phosphatase 2A (PP2A) inhibitor (4-(3-carboxy-7-oxa-bicyclo[2.2.1]heptane-2-carbonyl)piperazine-1-carboxylic acid tert-butyl ester), was designed and delivered using PEG-b-PLGA micelles for combination chemotherapy. Polymer/canthaplatin micelles facilitated the delivery of the drug into cancer cells through endocytosis and diminished DNA repair by PP2A inhibition, resulting in enhanced anti-tumor efficiency and excellent reversal ability of tumor resistance to cisplatin both in vitro and in vivo. Additionally, the polymer/canthaplatin micelles could prolong drug residence in the blood and decrease the side effects when compared to cisplatin.

A recyclable and reusable supported Cu(I) catalyzed azide-alkyne click polymerization

The azide-alkyne click polymerization (AACP) has emerged as a powerful tool for the synthesis of functional polytriazoles. While, for the Cu(I)-catalyzed AACP, the removal of the catalytic Cu(I) species from the resulting polytriazoles is difficult, and the research on the recyclability and reusability of the catalyst remains intact. Herein, we reported the first example of using recyclable and reusable supported Cu(I) catalyst of CuI@A-21 for the AACP. CuI@A-21 could not only efficiently catalyze the AACP but also be reused for at least 4 cycles. Moreover, pronounced reduction of copper residues in the products was achieved. Apart from being a green and cost-effective polymer synthesis strategy, this method will also broaden the application of AACP in material and biological sciences and provide guidelines for other polymerizations with metal catalysts.

Effect of Tris-acetate buffer on endotoxin removal from human-like collagen used biomaterials

Protein preparation, which has active ingredients designated for the use of biomaterials and therapeutical protein, is obtained by genetic engineering, but products of genetic engineering are often contaminated by endotoxins. Because endotoxin is a ubiquitous and potent proinflammatory agent, endotoxin removal or depletion from protein is essential for researching any biomaterials. In this study, we have used Tris-acetate (TA) buffer of neutral pH value to evaluate endotoxins absorbed on the Pierce high-capacity endotoxin removal resin. The effects of TA buffer on pH, ionic strength, incubation time as well as human-like collagen (HLC) concentration on eliminating endotoxins are investigated. In the present experiments, we design an optimal method for TA buffer to remove endotoxin from recombinant collagen and use a chromogenic tachypleus amebocyte lysate (TAL) test kit to measure the endotoxin level of HLC. The present results show that, the endotoxins of HLC is dropped to 8.3EU/ml at 25 mM TA buffer (pH7.8) with 150 mM NaCl when setting incubation time at 6h, and HLC recovery is about 96%. Under this experimental condition, it is proved to exhibit high efficiencies of both endotoxin removal and collagen recovery. The structure of treated HLC was explored by Transmission Electron Microscopy (TEM), demonstrating that the property and structure of HLC treated by TA buffer are maintained. Compared to the most widely used endotoxin removal method, Triton X-114 extraction, using TA buffer can obtain the non-toxic HLC without extra treatment for removing the toxic substances in Triton X-114. In addition, the present study aims at establishing a foundation for further work in laboratory animal science and providing a foundation for medical grade biomaterials.

Click chemistry plays a dual role in biodegradable polymer design

Click chemistry plays a dual role in the design of new citrate-based biodegradable elastomers (CABEs) with greatly improved mechanical strength and easily clickable surfaces for biofunctionalization. This novel chemistry modification strategy is applicable to a number of different types of polymers for improved mechanical properties and biofunctionality.

Fluorescent bowl-shaped nanoparticles from ‘clicked’ porphyrin–polymer conjugates

We report the synthesis and post-synthetic modification of a library of hydrophilic and hydrophobic ‘clicked’ triazole-linked porphyrin–polymer conjugates (PPCs), and their subsequent assembly into fluorescent bowl-shaped nanoparticles.

New bio-renewable polyester with rich side amino groups from l-lysine via controlled ring-opening polymerization

Lysine, a renewable resource from biomass fermentation, was converted to pure O-carboxyanhydride monomer, then well-defined polyester with amino groups was prepared via controlled ring-opening polymerization.

Emulsion click microspheres: morphology/shape control by surface cross-linking and a porogen

Click chemistry was applied to prepare emulsion microspheres (MSs), to realize in situ cross-linking and bioconjugation in the same system. The morphology/shape of the MSs can be adjusted by applying surface click cross-linking and a porogen simultaneously.

Paclitaxel prodrug nanoparticles combining chemical conjugation and physical entrapment for enhanced antitumor efficacy

The combination of prodrug and physical entrapment conveniently realizes high drug loading and time-programmable PTX delivery

Effect of plasma components on the stability and permeability of microcapsule

Immobilization of hepatocytes in microcapsules has been a potentially alternative methodology for bioartificial livers (BALs). Moreover, the stability and permeability are the key parameters of these microcapsules. However, these alginate-based microcapsules are unstable if the surrounding medium disrupts the ionic interactions between alginate and the polycation. As hundreds of components are included in human plasma, the stability and permeability in plasma of microcapsules need to be sufficiently investigated. In the present study, the stability of three kinds of alginate-based microcapsules was evaluated when they were immersed in plasma. Our results showed that stability of alginate-α-poly (L-lysine)-alginate (α-APA) microcapsules was well maintained, better than those of alginate-ε-poly (L-lysine)-alginate (ε-APA) and alginate-chitosan-alginate (ACA) microcapsules. Also, factors affecting the stability of microcapsules in plasma were analyzed and it showed that heparin was the key factor that affected the stability of α-APA microcapsules, whereas heparin and low molecular electrolytes such as HCO3(-) and H2 PO4(-)/HPO4(2-) were the factors to ε-APA and ACA microcapsules. In addition, the permeability evaluation showed no decrease in permeability of microcapsules after incubation in plasma. Our study might provide a foundation for the selection and modification of materials for microcapsule-based BAL devices.

Combination of anti-biofouling and ion-interaction by click chemistry for endotoxin selective removal from protein solution

A successful combination of anti-biofouling and ion-interaction for endotoxin (ET) selective removal from protein solutions is realized via the immobilization of two ordinary polymers, PEG and PLL, which have protein resistance and endotoxin adsorption properties, respectively, together onto azide-functional polystyrene (PS-N3 ) microspheres (MSs) using a surface click reaction. Toxic copper ions residu is successfully minimized by the addition of 2,2'-bipyridine (BiPy).

Amide-mediated hydrogen bonding at organic crystal/water interfaces enables selective endotoxin binding with picomolar affinity

Since the discovery of endotoxins as the primary toxic component of Gram-negative bacteria, researchers have pursued the quest for molecules that detect, neutralize, and remove endotoxins. Selective removal of endotoxins is particularly challenging for protein solutions and, to this day, no general method is available. Here, we report that crystals of the purine-derived compound allantoin selectively adsorb endotoxins with picomolar affinity through amide-mediated hydrogen bonding in aqueous solutions. Atom force microscopy and chemical inhibition experiments indicate that endotoxin adsorption is largely independent from hydrophobic and ionic interactions with allantoin crystals and is mediated by hydrogen bonding with amide groups at flat crystal surfaces. The small size (500 nm) and large specific surface area of allantoin crystals results in a very high endotoxin-binding capacity (3 × 10(7) EU/g) which compares favorably with known endotoxin-binding materials. These results provide a proof-of-concept for hydrogen bond-based molecular recognition processes in aqueous solutions and establish a practical method for removing endotoxins from protein solutions.

PEGylated click polypeptides synthesized by copper-free microwave-assisted thermal click polymerization for selective endotoxin removal from protein solutions

PEGylated click polypeptides (PEG-CPs) containing α-amino side groups as well as PEG segments are designed for selective endotoxin removal from protein solutions. The PEG-CPs are synthesized via copper-free thermal click copolymerization from aspartic (or glutamic) acid-based dialkyne and diazide monomers (containing free amino side groups) and alkyne-terminated mPEGs or dialkyne-terminated PEGs. Microwave-assisting technology is introduced into thermal click chemistry to improve the reaction efficiency. The monomers and polymers are fully characterized using NMR, XPS, and MALDI-TOF MS. After immobilizing the PEGylated click polypeptides onto polystyrene microspheres, the adsorbents exhibit good endotoxin removal selectivity from BSA solutions.