Phosphonium-Containing Diblock Copolymers for Enhanced Colloidal Stability and Efficient Nucleic Acid Delivery

Bioderived Lipoic Acid-Based Dynamic Covalent Nanonetworks of Poly(disulfide)s: Enhanced Encapsulation Stability and Cancer Cell-Selective Delivery of Drugs

Dynamic covalent poly(disulfide)-based cross-linked nanoaggregates, termed nanonetworks (NNs), endowed with pH- and redox-responsive degradation features have been fabricated for stable noncovalent encapsulation and triggered cargo release in a controlled fashion. A bioderived lipoic acid-based Gemini surfactant-like amphiphilic molecule was synthesized for the preparation of nanoaggregates. It self-assembles by a entropy-driven self-assembly process in aqueous milieu. To further stabilize the self-assembled nanostructure, the core was cross-linked by ring-opening disulfide exchange polymerization (RODEP) of 1,2-dithiolane rings situated inside the core of the nanoaggregates. The cross-linked nanoaggregates, i.e., nanonetwork, are found to be stable in the presence of blood serum, and also, they maintain the self-assembled structure even below the critical aggregation concentration (CAC) as probed by dynamic light scattering (DLS) experiments. The nanonetwork showed almost 50% reduction in guest leakage compared to that of the nanoaggregates as shown by the release profile in the absence of stimuli, suggesting high encapsulation stability as evidenced by the fluorescence resonance energy transfer (FRET) experiment. The decross-linking of the nanonetwork occurs in response to redox and pH stimuli due to disulfide reduction and β-thioester hydrolysis, respectively, thus empowering disassembly-mediated controlled cargo release up to ∼87% for 55 h of incubation. The biological evaluation of the doxorubicin (DOX)-loaded nanonetwork revealed environment-specific surface charge modulation-mediated cancer cell-selective cellular uptake and cytotoxicity. The benign nature of the nanonetwork toward normal cells makes the system very promising in targeted drug delivery applications. Thus, the ease of synthesis, nanonetwork fabrication reproducibility, robust stability, triggered drug release in a controlled fashion, and cell-selective cytotoxicity behavior, we believe, will make the system a potential candidate in the development of robust materials for chemotherapeutic applications.

Weakly Acidic pH and Reduction Dual Stimuli-Responsive Gel Particles

This paper reports the facile preparation of dual stimuli-responsive gel particles that simultaneously respond to weakly acidic and reducing stimuli and the application of these gel particles as a drug delivery carrier. The dual stimuli-responsive gel particles composed of a pH-responsive polymer network cross-linked with reduction stimuli-responsive disulfide cross-links, and biocompatible poly(ethylene glycol) cross-links were prepared by soap-free emulsion polymerization. The resulting gel particles were colloidally stable at physiological ionic strength and had a diameter of approximately 200 nm with a narrow size distribution. The resulting gel particles slightly swelled in an acidic environment. On the other hand, the gel particles drastically swelled under simultaneous weakly acidic and reducing conditions because of the ionization of tertiary amino groups in the gel network and a decrease in the cross-linking density resulting from cleavage of the disulfide cross-links. When cells were treated with the gel particles, they were taken up by cells via the endocytosis pathway and distributed in the cytosol after endosomal escape by the proton sponge effect. In addition, a hydrophobic drug, doxorubicin (Dox), was loaded into the gel particles through hydrophobic interactions. Dox was released from the gel particles under weakly acidic and reducing conditions, while the Dox release was inhibited at neutral pH. The weakly acidic pH- and reduction stimuli-responsive release of Dox from gel particles was attributed to the drastic swelling of these particles. The fascinating properties of the dual stimuli-responsive gel particles suggest that they can provide a useful platform for designing intracellular drug delivery carriers.

Two-Photon Near-Infrared AIE Luminogens as Multifunctional Gene Carriers for Cancer Theranostics

Construction of multifunctional nonviral gene vectors to execute defined tasks holds great potential for the precise and effective treatment of gene-associated diseases. Herein, we have developed four large π-conjugation triphenylamine derivatives bearing two polar [12]aneN₃ heads and a lipophilic tail for applications in gene delivery, one/two-photon-triggered near-infrared (NIR) fluorescence bioimaging, and combined photodynamic therapy (PDT) and gene therapy of cancer. These compounds possess typical NIR aggregation-induced emission characteristics, mega Stokes shifts, strong two-photon excitation fluorescence, and excellent DNA condensation abilities. Among them, vector 4 with a tail of n-hexadecane realized a transfection efficiency as high as 6.7 times that of the commercial transfection agent Lipofectamine 2000 in HEK293T cell lines. Using vector 4 as an example, transfection process tracking and ex vivo/in vivo tumoral imaging and retention with high resolution, high brightness, deep tissue penetration, and good biosafety were demonstrated. In addition, efficient singlet oxygen (¹O₂) generation by the DNA complex formed by vector 4 (4/DNA) resulted in effective PDT. Combined with anticancer gene therapy, collaborative cancer treatment with a dramatically enhanced cancer cell-killing effect was achieved. The development of this "three birds, one stone" approach suggests a new and promising strategy for better cancer treatment and real-time tracking of gene delivery.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Mixed Polyplex Micelles with Thermoresponsive and Lysine-Based Zwitterionic Shells Derived from Two Poly(vinyl amine)-Based Block Copolymers

Two series of poly(vinyl amine) (PVAm)-based block copolymers with zwitterionic and thermoresponsive segments were synthesized by the reversible addition-fragmentation chain transfer polymerization. A mixture of the two copolymers, poly(N-acryloyl-l-lysine) (PALysOH) and poly(N-isopropylacrylamide) (PNIPAM), which have the same cationic PVAm chain but different shell-forming segments, were used to prepare mixed polyplex micelles with DNA. Both PVAm-b-PALysOH and PVAm-b-PNIPAM showed low cytotoxicity, with characteristic assembled structures and stimuli-responsive properties. The cationic PVAm segment in both block copolymers showed site-specific interactions with DNA, which were evaluated by dynamic light scattering, zeta potential, circular dichroism, agarose gel electrophoresis, atomic force microscopy, and transmission electron microscopy measurements. The PVAm-b-PNIPAM/DNA polyplexes showed the characteristic temperature-induced formation of assembled structures in which the polyplex size, surface charge, chiroptical property of DNA, and polymer-DNA binding were governed by the nitrogen/phosphate (N/P) ratio. The DNA binding strength and colloidal stability of the PVAm-b-PALysOH/DNA polyplexes could be tuned by introducing an appropriate amount of zwitterionic PALysOH functionality, while maintaining the polyplex size, surface charge, and chiroptical property, regardless of the N/P ratio. The mixed polyplex micelles showed temperature-induced stability originating from the hydrophobic (dehydrated) PNIPAM chains upon heating, and remarkable stability under salty conditions owing to the presence of the zwitterionic PALysOH chain on the polyplex surface.

Imminent antimicrobial bioink deploying cellulose, alginate, EPS and synthetic polymers for 3D bioprinting of tissue constructs

3D printing, one of its kinds has been a recent technological trend to fabricate complex and patterned biomaterial with controlled precision. With the conventional kick-start of printing metals and plastics, advancements in printing viable cells, polysaccharides or microbes themselves have been achieved. The additive antimicrobial properties in bioinks sourced from organic and inorganic materials have profound implications in tissue engineering. Cellulose, alginate, exopolysaccharides, ceramics and synthetic polymers are integrated as a viable component in inks and used for bio-printing. To date, bacterial infection and immunogenicity pose a potential health risk during a tissue implant or bone substitution. In order to mitigate microbial infection, antimicrobial bioinks with significant antimicrobial potential have been the much sought after strategies. This approach could be an effective frontline defense against microbial interference in tissue engineering and biomedical applications. An overview on the antimicrobial potential of polysaccharides as bioinks for 3D bioprinting has been critically reviewed.

A comprehensive review of the structures and properties of ionic polymeric materials

This review focuses on the mechanistic approach, the structure–property relationship and applications of ionic polymeric materials.

Polymeric siRNA gene delivery - transfection efficiency versus cytotoxicity

Within the field of gene therapy, there is a considerable need for the development of non-viral vectors that are able to compete with the efficiency obtained by viral vectors, while maintaining a good toxicity profile and not inducing an immune response within the body. While there have been many reports of possible polymeric delivery systems, few of these systems have been successful in the clinical setting due to toxicity, systemic instability or gene regulation inefficiency, predominantly due to poor endosomal escape and cytoplasmic release. The objective of this review is to provide an overview of previously published polymeric non-coding RNA and, to a lesser degree, oligo-DNA delivery systems with emphasis on their positive and negative attributes, in order to provide insight in the numerous hurdles that still limit the success of gene therapy.

Carbosilane dendrimers with phosphonium terminal groups are low toxic non-viral transfection vectors for siRNA cell delivery

Non-viral gene delivery vectors studied in the gene therapy applications are often designed with the cationic nitrogen containing groups necessary for binding and cell release of nucleic acids. Disadvantage is a relatively high toxicity which restricts the in vivo use of such nanoparticles. Here we show, that the 3rd generation carbosilane dendrimers possessing (trimethyl)phosphonium (PMe₃) groups on their periphery were able to effectively deliver the functional siRNA into the cells (B14, Cricetulus griseus), release it into the cytosol and finally to achieve up to 40% gene silencing of targeted gene (glyceraldehyde-3-phosphate dehydrogenase (GAPDH)) with the comparable or, in some cases, even better effectivity as their ammonium counterparts. Moreover, such cationic dendrimers show relatively low in vivo toxicity as compared to their ammonium analogues when analyzed by standard fish embryo test (FET) on Danio rerio in vivo model, with LD₅₀ = 6.26 µM after 48 h of incubation. This is more than 10-fold improvement as compared to published values for various other types of cationic dendrimers. We discuss the potential of further increase of the transfection efficiency, endosomal escape and decrease of toxicity of such non-viral vectors, based on the systematic screening of different types of substituents on central phosphonium atom.

Antimicrobial Polymers for Additive Manufacturing

Three-dimensional (3D) printing technologies can be widely used for producing detailed geometries based on individual and particular demands. Some applications are related to the production of personalized devices, implants (orthopedic and dental), drug dosage forms (antibacterial, immunosuppressive, anti-inflammatory, etc.), or 3D implants that contain active pharmaceutical treatments, which favor cellular proliferation and tissue regeneration. This review is focused on the generation of 3D printed polymer-based objects that present antibacterial properties. Two main different alternatives of obtaining these 3D printed objects are fully described, which employ different polymer sources. The first one uses natural polymers that, in some cases, already exhibit intrinsic antibacterial capacities. The second alternative involves the use of synthetic polymers, and thus takes advantage of polymers with antimicrobial functional groups, as well as alternative strategies based on the modification of the surface of polymers or the elaboration of composite materials through adding certain antibacterial agents or incorporating different drugs into the polymeric matrix.

Branched poly (trimethylphosphonium ethylacrylate-co-PEGA) by RAFT: alternative to cationic polyammoniums for nucleic acid complexation

Cationic and highly branched poly (trimethylphosphonium ethylacrylate-co-poly (ethylene glycol) acrylate) (p (TMPEA-co-PEGA)), and its ammonium equivalent, have been synthesised from post-polymerisation modification of a poly (bromo ethylacrylate-co-poly (ethylene glycol) acrylate) (p (BEA-co-PEGA)) precursor polymer produced using reversible addition fragmentation chain transfer (RAFT) polymerisation. The cationic polymers were evaluated for their ability to complex nucleic acids, their in vitro cytotoxicity and their GFP pDNA transfection efficiency. The results show RAFT copolymerisation of BEA and PEGA is a simple route to polyphosphoniums showing reduced cytotoxicities and higher transfection efficiencies than their polyammonium alternatives.

Development of Fully Degradable Phosphonium-Functionalized Amphiphilic Diblock Copolymers for Nucleic Acids Delivery

To expand the range of functional polymer materials to include fully hydrolytically degradable systems that bear bioinspired phosphorus-containing linkages both along the backbone and as cationic side chain moieties for packaging and delivery of nucleic acids, phosphonium-functionalized polyphosphoester- block-poly(l-lactide) copolymers of various compositions were synthesized, fully characterized, and their self-assembly into nanoparticles were studied. First, an alkyne-functionalized polyphosphoester- block-poly(l-lactide) copolymer was synthesized via a one pot sequential ring opening polymerization of an alkyne-functionalized phospholane monomer, followed by the addition of l-lactide to grow the second block. Second, the alkynyl side groups of the polyphosphoester block were functionalized via photoinitiated thiol-yne radical addition of a phosphonium-functionalized free thiol. The polymers of varying phosphonium substitution degrees were self-assembled in aqueous buffers to afford formation of well-defined core-shell assemblies with an average size ranging between 30 and 50 nm, as determined by dynamic light scattering. Intracellular delivery of the nanoparticles and their effects on cell viability and capability at enhancing transfection efficiency of nucleic acids (e.g., siRNA) were investigated. Cell viability assays demonstrated limited toxicity of the assembly to RAW 264.7 mouse macrophages, except at high polymer concentrations, where the polymer of high degree of phosphonium functionalization induced relatively higher cytotoxicity. Transfection efficiency was strongly affected by the phosphonium-to-phosphate (P+/P-) ratios of the polymers and siRNA, respectively. The AllStars Hs Cell Death siRNA complexed to the various copolymers at a P+/P- ratio of 10:1 induced comparable cell death to Lipofectamine. These fully degradable nanoparticles might provide biocompatible nanocarriers for therapeutic nucleic acid delivery.

Tetrabutylphosphonium Bromide Reduces Size and Polydispersity Index of Tat2:siRNA Nano-Complexes for Triticale RNAi

Cell-penetrating peptides (CPPs) are short 8-30 amino-acid oligopeptides that act as effective transducers of macromolecular cargo, particularly nucleic acids. They have been implemented in delivering dsDNA, ssDNA, and dsRNA into animal and plant cells. CPPs and nucleic acids form nano-complexes that are often 100-300 nm in size but still effectively transit the cell membrane of animal cells, but are less effective with plant cells due to the plant cell wall. To overcome this obstacle, nano-complexes of the CPP Tat₂ and various lengths of nucleic acid (21-mer siRNA duplex (dsRNA) to ~5.5 kb circular plasmid) were evaluated for size using dynamic light scattering (DLS), under conditions of increasing ionic strength (I_c) and addition of phase transfer catalyst salts (tetrabutylammonium bromide-TBAB and tetrabutylphosphonium bromide-TBPB) and sugars (maltose-mannitol solution). It was found that the combination of 21-mer siRNA:Tat₂ complexes with TBPB produced small 10-20 nm diameter nano-complexes with a polydispersity index (PDI) of ~0.1. Furthermore, it was found that for each length of nucleic acid that a linear mathematical relationship existed between the theoretical volume of the nano-complex and the nucleic acid length. Next, nano-complex formulation was tested for its ability to carry small interfering RNA molecules into plant cells and to trigger silencing of phytoene desaturase (PDS) in Triticale leaves. RT-qPCR showed 75% suppression of PDS, demonstrating that TBPB acts as an adjuvant in effecting the entry and efficacy of siRNA in young Triticale plants.

Poly(ether ester) Ionomers as Water-Soluble Polymers for Material Extrusion Additive Manufacturing Processes

Water-soluble polymers as sacrificial supports for additive manufacturing (AM) facilitate complex features in printed objects. Few water-soluble polymers beyond poly(vinyl alcohol) enable material extrusion AM. In this work, charged poly(ether ester)s with tailored rheological and mechanical properties serve as novel materials for extrusion-based AM at low temperatures. Melt transesterification of poly(ethylene glycol) (PEG, 8k) and dimethyl 5-sulfoisophthalate afforded poly(ether ester)s of sufficient molecular weight to impart mechanical integrity. Quantitative ion exchange provided a library of poly(ether ester)s with varying counterions, including both monovalent and divalent cations. Dynamic mechanical and tensile analysis revealed an insignificant difference in mechanical properties for these polymers below the melting temperature, suggesting an insignificant change in final part properties. Rheological analysis, however, revealed the advantageous effect of divalent countercations (Ca²⁺, Mg²⁺, and Zn²⁺) in the melt state and exhibited an increase in viscosity of two orders of magnitude. Furthermore, time-temperature superposition identified an elevation in modulus, melt viscosity, and flow activation energy, suggesting intramolecular interactions between polymer chains and a higher apparent molecular weight. In particular, extrusion of poly(PEG_8k-co-CaSIP) revealed vast opportunities for extrusion AM of well-defined parts. The unique melt rheological properties highlighted these poly(ether ester) ionomers as ideal candidates for low-temperature material extrusion additive manufacturing of water-soluble parts.

Gemini-Type Tetraphenylethylene Amphiphiles Containing [12]aneN3 and Long Hydrocarbon Chains as Nonviral Gene Vectors and Gene Delivery Monitors

Four gemini amphiphiles decorated with triazole-[12]aneN₃ as the hydrophilic moiety and various long hydrocarbons as hydrophobic moieties, 1-4, were designed to form micelles possessing the aggregation-induced emission (AIE) property for gene delivery and tracing. All four amphiphiles give ultralow critical micelle concentrations, are pH-/photostable and biocompatible, and completely retard the migration of plasmid DNAs at low concentrations. The DNA-binding abilities of the micelles were fully assessed. The coaggregated nanoparticles of 1-4 with DNAs could convert back into AIE micelles. In vitro transfections indicated that lipids 1 and 2 and their originated liposomes bearing decent delivering abilities have great potentials as nonviral vectors. Finally, on the basis of the transfection and the transitions between condensates and micelles, lipid 2 was singled out as the first example for real-time tracing of the intracellular deliveries of nonlabeled DNA, which provides spatiotemporal messages about the processes of condensate uptake and DNA release.

Phosphonium carbosilane dendrimers for biomedical applications – synthesis, characterization and cytotoxicity evaluation

Phosphonium carbosilane dendrimers could represent an alternative to ammonium ones in gene therapy applications with high potential of mitochondrial targeting.

Phosphonium polymers for gene delivery

Phosphonium salt-containing polymers have very recently started to emerge as attractive materials for engineering non-viral gene delivery systems.

Synthesis of Water-Soluble Imidazolium Polyesters as Potential Nonviral Gene Delivery Vehicles

The inherent hydrolytic reactivity of polyesters renders them excellent candidates for a variety of biomedical applications. Incorporating ionic groups further expands their potential impact, encompassing charge-dependent function such as deoxyribonucleic acid (DNA) binding, antibacterial properties, and pH-responsiveness. Catalyst-free and solvent-free polycondensation of a bromomethyl imidazolium-containing (BrMeIm) diol with neopentylglycol (NPG) and adipic acid (AA) afforded novel charged copolyesters with pendant imidazolium sites. Varying ionic content influenced thermal properties and offered a wide-range, -41 to 40 °C, of composition-dependent glass transition temperatures (T_gs). In addition to desirable melt and thermal stability, polyesters with ionic concentrations ≥15 mol % readily dispersed in water, suggesting potential as nonviral gene delivery vectors. An electrophoretic gel shift assay confirmed the novel cationic copolyesters successfully bound DNA at an N/P ratio of 4 for 50 mol % and 75 mol % charged copolyesters (P(NA₅₀-co-ImA₅₀) and P(NA₂₅-co-ImA₇₅)), and an N/P ratio of 5 for 100 mol % Im (PImA). Polyplexes exhibited insignificant cytotoxicity even at high concentrations (200 μg/mL), and a Luciferase transfection assay revealed the ionic (co)polyesters transfected DNA significantly better than the untreated controls. The successful transfection of these novel (co)polyesters inspires future imidazolium-containing polyester design.

Cancer Theranostic Nanoparticles Self-Assembled from Amphiphilic Small Molecules with Equilibrium Shift-Induced Renal Clearance

Nano drug delivery systems have emerged as promising candidates for cancer therapy, whereas their uncertainly complete elimination from the body within specific timescales restricts their clinical translation. Compared with hepatic clearance of nanoparticles, renal excretion of small molecules is preferred to minimize the agent-induced toxicity. Herein, we construct in vivo renal-clearable nanoparticles, which are self-assembled from amphiphilic small molecules holding the capabilities of magnetic resonance imaging (MRI) and chemotherapy. The assembled nanoparticles can accumulate in tumor tissues for their nano-characteristics, while the small molecules dismantled from the nanoparticles can be efficiently cleared by kidneys. The renal-clearable nanoparticles exhibit excellent tumor-inhibition performance as well as low side effects and negligible chronic toxicity. These results demonstrate a potential strategy for small molecular nano drug delivery systems with obvious anticancer effect and low-toxic metabolism pathway for clinical applications.

Diphenylphosphino Styrene-Containing Homopolymers: Influence of Alkylation and Mobile Anions on Physical Properties

Conventional free radical polymerization and post-alkylation of 4-diphenylphosphino styrene (DPPS) generate a new class of high-molecular-weight phosphonium-containing homopolymers with tunable thermal, viscoelastic, and wetting properties. Post-alkylation and subsequent anion exchange provide an effective method for tuning Tg values and thermal stability as a function of alkyl chain length and counteranion selection (X(-) , BF4 (-) , TfO(-) , and Tf2 N(-) ). Rheological characterization facilitates the generation of time-temperature-superposition (TTS) pseudomaster curves and subsequent analysis of frequency sweeps at various temperatures reveals two relaxation modes corresponding to long-range segmental motion and the onset of viscous flow. Contact angle measurements reveal the influence of counteranion selection on wetting properties, revealing increased contact angles for homopolymers containing nucleophilic counteranions. These investigations provide fundamental insight into phosphonium-containing polymers, aiming to guide future research and applications involving electro-active polymeric devices.

Poly(1-Vinyl-1,2,4-triazolium) Poly(Ionic Liquid)s: Synthesis and the Unique Behavior in Loading Metal Ions

Herein, the synthesis of a series of poly(4-alkyl-1-vinyl-1,2,4-triazolium) poly(ionic liquid)s is reported either via straightforward free radical polymerization of their corresponding ionic liquid monomers or via anion metathesis of the polymer precursors bearing halide as counter anion. The ionic liquid monomers are first prepared via N-alkylation reaction of commercially available 1-vinyl-1,2,4-triazole with alkyl iodides, followed by anion metathesis with targeted fluorinated anions. The thermal properties and solubilities of these poly(ionic liquid)s have been systematically investigated. Interestingly, it is found that the poly(4-ethyl-1-vinyl-1,2,4-triazolium) poly(ionic liquid) exhibited an improved loading capacity of transition metal ions in comparison with its imidazolium counterpart.

Co-delivery of drugs and plasmid DNA for cancer therapy

Cancer is an extremely complex disease involving multiple signaling pathways that enable tumor cells to evade programmed cell death, thus making cancer treatment extremely challenging. The use of combination therapy involving both gene therapy and chemotherapy has resulted in enhanced anti-cancer effects and has become an increasingly important strategy in medicine. This review will cover important design parameters that are incorporated into delivery systems for the co-administration of drug and plasmid-based nucleic acids (pDNA and shRNA), with particular emphasis on polymers as delivery materials. The unique challenges faced by co-delivery systems and the strategies to overcome such barriers will be discussed. In addition, the advantages and disadvantages of combination therapy using separate carrier systems versus the use of a single carrier will be evaluated. Finally, future perspectives in the design of novel platforms for the combined delivery of drugs and genes will be presented.

Tetrakis(dialkylamino)phosphonium Polyelectrolytes Prepared by Reversible Addition-Fragmentation Chain Transfer Polymerization

A tetrakis(dialkylamino)phosphonium cation ([P(NR₂)₄]⁺) was appended to a styrenic monomer and explored in reversible addition-fragmentation chain transfer polymerization (RAFT) to conduct random copolymerizations of the cationic monomer with styrene. Well-defined polyelectrolytes with molecular weights up to ∼30 100 and dispersities between ∼1.2 and 1.4 were obtained. Up to 18.9 mol % of the ionic monomer could be incorporated into the polymer with hexafluorophosphate or bis(trifluoromethane)sulfonimide acting as the counterion during polymerization. Differential scanning calorimetry of the hexafluorophosphate polymers revealed glass transition temperatures higher than polystyrene likely due to interactions between the anion and the polymer. Thermogravimetric analysis indicated these materials have high thermal stability with decomposition temperatures approaching 400 °C.

Ternary polyplex micelles with PEG shells and intermediate barrier to complexed DNA cores for efficient systemic gene delivery

Simultaneous achievement of prolonged retention in blood circulation and efficient gene transfection activity in target tissues has always been a major challenge hindering in vivo applications of nonviral gene vectors via systemic administration. Herein, we constructed novel rod-shaped ternary polyplex micelles (TPMs) via complexation between the mixed block copolymers of poly(ethylene glycol)-b-poly{N'-[N-(2-aminoethyl)-2-aminoethyl]aspartamide} (PEG-b-PAsp(DET)) and poly(N-isopropylacrylamide)-b-PAsp(DET) (PNIPAM-b-PAsp(DET)) and plasmid DNA (pDNA) at room temperature, exhibiting distinct temperature-responsive formation of a hydrophobic intermediate layer between PEG shells and pDNA cores through facile temperature increase from room temperature to body temperature (~37 °C). As compared with binary polyplex micelles of PEG-b-PAsp(DET) (BPMs), TPMs were confirmed to condense pDNA into a more compact structure, which achieved enhanced tolerability to nuclease digestion and strong counter polyanion exchange. In vitro gene transfection results demonstrated TPMs exhibiting enhanced gene transfection efficiency due to efficient cellular uptake and endosomal escape. Moreover, in vivo performance evaluation after intravenous injection confirmed that TPMs achieved significantly prolonged blood circulation, high tumor accumulation, and promoted gene expression in tumor tissue. Moreover, TPMs loading therapeutic pDNA encoding an anti-angiogenic protein remarkably suppressed tumor growth following intravenous injection into H22 tumor-bearing mice. These results suggest TPMs with PEG shells and facilely engineered intermediate barrier to inner complexed pDNA have great potentials as systemic nonviral gene vectors for cancer gene therapy.

3D Printing Phosphonium Ionic Liquid Networks with Mask Projection Microstereolithography

Photopolymerization coupled with mask projection microstereolithography successfully generated various 3D printed phosphonium polymerized ionic liquids (PILs) with low UV light intensity requirements and high digital resolution. Varying phosphonium monomer concentration, diacrylate cross-linking comonomer, and display images enabled precise 3D design and polymeric properties. The resulting cross-linked phosphonium PIL objects exhibited a synergy of high thermal stability, tunable glass transition temperature, optical clarity, and ion conductivity, which are collectively well-suited for emerging electro-active membrane technologies. Ion conductivity measurements on printed objects revealed a systematic progression in conductivity with ionic liquid monomer content, and thermal properties and solvent extraction demonstrated the formation of a polymerized ionic liquid network, with gel fractions exceeding 95%.

Glucose-containing diblock polycations exhibit molecular weight, charge, and cell-type dependence for pDNA delivery

A series of diblock glycopolycations were created by polymerizing 2-deoxy-2-methacrylamido glucopyranose (MAG) with either a tertiary amine-containing monomer, N-[3-(N,N-dimethylamino) propyl] methacrylamide (DMAPMA), or a primary amine-containing unit, N-(2-aminoethyl) methacrylamide (AEMA). Seven structures were synthesized via aqueous reversible addition-fragmentation chain transfer (RAFT) polymerization that varied in the block lengths of MAG, DMAPMA, and AEMA along with two homopolymer controls of DMAPMA and AEMA that lacked a MAG block. The polymers were all able to complex plasmid DNA into polyplex structures and to prevent colloidal aggregation of polyplexes in physiological salt conditions. In vitro transfection experiments were performed in both HeLa (human cervix adenocarcinoma) cells and HepG2 (human liver hepatocellular carcinoma) cells to examine the role of charge type, block length, and cell type on transfection efficiency and toxicity. The glycopolycation vehicles with primary amine blocks and PAEMA homopolymers revealed much higher transfection efficiency and lower toxicity when compared to analogs created with DMAPMA. Block length was also shown to influence cellular delivery and toxicity; as the block length of DMAPMA increased in the glycopolycation-based polyplexes, toxicity increased while transfection decreased. While the charge block played a major role in delivery, the MAG block length did not affect these cellular parameters. Lastly, cell type played a major role in efficiency. These glycopolymers revealed higher cellular uptake and transfection efficiency in HepG2 cells than in HeLa cells, while homopolycations (PAEMA and PDMAPMA) lacking the MAG blocks exhibited the opposite trend, signifying that the MAG block could aid in hepatocyte transfection.

Polypeptides with quaternary phosphonium side chains: synthesis, characterization, and cell-penetrating properties

Polypeptides bearing quaternary phosphonium side chains were synthesized via controlled ring-opening polymerization of chlorine-functionalized amino acid N-carboxyanhydride monomers followed by one-step nucleophilic substitution reaction with triethylphosphine. The conformation of the resulting polypeptides can be controlled by modulating the side-chain length and α-carbon stereochemistry. The phosphonium-based poly(l-glutamate) derivatives with 11 σ-bond backbone-to-charge distance adopt stable α-helical conformation against pH and ionic strength changes. These helical, quaternary phosphonium-bearing polypeptides exhibit higher cell-penetrating capability than their racemic and random-coiled analogues. They enter cells mainly via an energy-independent, nonendocytic cell membrane transduction mechanism and exhibit low cytotoxicity, substantiating their potential use as a safe and effective cell-penetrating agent.

TACN-based oligomers with aromatic backbones for efficient nucleic acid delivery

Oligomers with an aromatic backbone showed highly improved gene transfection efficiency compared to 25 kDa PEI.

Water-dispersible cationic polyurethanes containing pendant trialkylphosphoniums

Water-dispersible, cationic polyurethanes containing pendant trialkylphosphoniums demonstrated desirable properties in broad applications from thermoplastic elastomers to nucleic acid delivery vectors.