A tunable and reversible platform for the intracellular formation of genetically engineered protein microdomains

Multiplexed dynamic control of temperature to probe and observe mammalian cells

Temperature is a critical parameter for biological function, yet there is a lack of approaches to modulate the temperature of biological specimens in a dynamic and high-throughput manner. We present the thermoPlate, a device for programmable control of temperature in each well of a 96-well plate, in a manner compatible with mammalian cell culture and live cell imaging. The thermoPlate maintains precise feedback control of temperature patterns independently in each well, with minutes-scale heating and cooling through ΔT ~15-20°C. A computational model that predicts thermal diffusion guides optimal design of heating protocols. The thermoPlate allowed systematic characterization of both synthetic and natural thermo-responsive systems. We first used the thermoPlate in conjunction with live-cell microscopy to characterize the rapid temperature-dependent phase separation of a synthetic elastin-like polypeptide (ELP53). We then measured stress granule (SG) formation in response to heat stress, observing differences in SG dynamics with each increasing degree of stress. We observed adaptive formation of SGs, whereby SGs formed but then dissolved in response to persistent heat stress (≥ 42°C). SG adaptation revealed a biochemical memory of stress that depended on both the time and temperature of heat shock. Stress memories continued to form even after the removal of heat and persisted for 6-9 hours before dissipating. The capabilities and open-source nature of the thermoPlate will empower the study and engineering of a wide range of thermoresponsive phenomena.

A highly-sensitive genetically encoded temperature indicator exploiting a temperature-responsive elastin-like polypeptide

Genetically encoded temperature indicators (GETIs) allow for real-time measurement of subcellular temperature dynamics in live cells. However, GETIs have suffered from poor temperature sensitivity, which may not be sufficient to resolve small heat production from a biological process. Here, we develop a highly-sensitive GETI, denoted as ELP-TEMP, comprised of a temperature-responsive elastin-like polypeptide (ELP) fused with a cyan fluorescent protein (FP), mTurquoise2 (mT), and a yellow FP, mVenus (mV), as the donor and acceptor, respectively, of Förster resonance energy transfer (FRET). At elevated temperatures, the ELP moiety in ELP-TEMP undergoes a phase transition leading to an increase in the FRET efficiency. In HeLa cells, ELP-TEMP responded to the temperature from 33 to 40 °C with a maximum temperature sensitivity of 45.1 ± 8.1%/°C, which was the highest ever temperature sensitivity among hitherto-developed fluorescent nanothermometers. Although ELP-TEMP showed sensitivity not only to temperature but also to macromolecular crowding and self-concentration, we were able to correct the output of ELP-TEMP to achieve accurate temperature measurements at a subcellular resolution. We successfully applied ELP-TEMP to accurately measure temperature changes in cells induced by a local heat spot, even if the temperature difference was as small as < 1 °C, and to visualize heat production from stimulated Ca²⁺ influx in live HeLa cells induced by a chemical stimulation. Furthermore, we investigated temperatures in the nucleus and cytoplasm of live HeLa cells and found that their temperatures were almost the same within the temperature resolution of our measurement. Our study would contribute to better understanding of cellular temperature dynamics, and ELP-TEMP would be a useful GETI for the investigation of cell thermobiology.

Charge Density as a Molecular Modulator of Nanostructuration in Intrinsically Disordered Protein Polymers

Intrinsically disordered protein polymers (IDPPs) have attracted a lot of attention in the development of bioengineered devices and for use as study models in molecular biology because of their biomechanical properties and stimuli-responsiveness. The present study aims to understand the effect of charge density on the self-assembly of IDPPs. To that end, a library of recombinant IDPPs based on an amphiphilic diblock design with different charge densities was bioproduced, and their supramolecular assembly was characterized on the nano-, meso-, and microscale. Although the phase transition was driven by the collapse of hydrophobic moieties, the hydrophilic block composition strongly affected hierarchical assembly and, therefore, enabled the production of new molecular architectures, thus leading to new dynamics that govern the liquid-gel transition. These results highlight the importance of electrostatic repulsion for the hierarchical assembly of IDPPs and provide insights into the manufacture of supramolecular protein-based materials.

De novo engineering of intracellular condensates using artificial disordered proteins

Phase separation of intrinsically disordered proteins (IDPs) is a remarkable feature of living cells to dynamically control intracellular partitioning. Despite the numerous new IDPs that have been identified, progress towards rational engineering in cells has been limited. To address this limitation, we systematically scanned the sequence space of native IDPs and designed artificial IDPs (A-IDPs) with different molecular weights and aromatic content, which exhibit variable condensate saturation concentrations and temperature cloud points in vitro and in cells. We created A-IDP puncta using these simple principles, which are capable of sequestering an enzyme and whose catalytic efficiency can be manipulated by the molecular weight of the A-IDP. These results provide a robust engineered platform for creating puncta with new, phase-separation-mediated control of biological function in living cells.

Human Granulocyte-Macrophage Colony-Stimulating Factor Fused to Elastin-Like Polypeptides Assembles Biologically-Active Nanoparticles

Human granulocyte-macrophage colony-stimulating factor (hGMCSF) is crucial in the immune system as it stimulates survival, proliferation, differentiation, and functional activation of myeloid hematopoietic cells. hGMCSF is integral to approved therapies, including monoclonal antibodies against checkpoint inhibitors, chimeric antigen receptors, and prevention of chemotherapy-induced neutropenia. Recombinant hGMCSF can be purified from Escherichia. coli; however, it forms inclusion bodies that require solubilization and refolding. Alternatively, this manuscript describes its fusion with an elastin-like polypeptide (ELP). Previously reported as purification tags and solubility enhancers, ELPs are recombinant polypeptides that undergo reversible temperature-dependent phase separation. This report is the first to show that fusion to an ELP enables direct purification of hGMCSF fusions from the soluble fraction of bacterial lysate. Surprisingly, these ELP-fusions assemble stable, small, spherical nanoparticles that maintain pro-mitotic activity of hGMCSF. These nanoparticles exhibit ELP-mediated phase separation; however, nanoparticle assembly significantly increases the entropic and enthalpic cost of phase separation compared to ELP alone. The attachment of a high molecular weight ELP to a difficult-to-express protein, like hGMCSF, appears to be a useful strategy to stabilize bioactive, protein-based nanoparticles, which may have broad applications in medicine and biology.

Caveolin elastin-like polypeptide fusions mediate temperature-dependent assembly of caveolar microdomains

Caveolae are membrane organelles formed by submicron invaginations in the plasma membrane, and are involved in mechanosensing, cell signaling, and endocytosis. Although implicated broadly in physiology and pathophysiology, better tools are required to elucidate the precise role of caveolar processes through selective activation and inactivation of their trafficking. Our group recently reported that thermally-responsive elastin-like polypeptides (ELPs) can trigger formation of 'genetically engineered protein microdomains (GEPMs)' functionalized with either Clathrin-light chain or the epidermal growth factor receptor. This manuscript is the first report of this strategy to modulate caveolin-1 (CAV1). By attaching different ELP sequences to CAV1, mild heating can be used to self-assemble CAV1-ELP microdomains inside of cells. The temperature of self-assembly can be controlled by tuning the ELP sequence. The formation of CAV1-ELP microdomains internalizes Cholera Toxin Subunit B, a commonly used marker of caveolae mediated endocytosis. CAV1-ELPs also colocalize with Cavin 1, an essential component of functional caveolae biogenesis. With the emerging significance of caveolae in health and disease and the lack of specific probes to rapidly and reversibly affect caveolar function, CAV1-ELP microdomains are a new tool to rapidly probe caveolae associated processes in endocytosis, cell signaling, and mechanosensing.

Tunable assembly of protein-microdomains in living vertebrate embryos

Subcellular events such as trafficking and signaling are regulated by self-assembled protein complexes inside the cell. The ability to rapidly and reversibly manipulate these protein complexes would likely enhance studies of their mechanisms and their roles in biological function and disease manifestation.^{[1, 2]} This manuscript reports that thermally-responsive elastin-like polypeptides (ELPs) linked to fluorescent proteins can regulate the self-assembly and disassembly of protein microdomains within the individual cells of zebrafish embryos. By exploring a library of fluorescent ELP proteins, this reports demonstrates that ELPs can co-assemble different fluorescent proteins inside of embryos. By tuning ELP length and sequence, fluorescent protein microdomains can be assembled at different temperatures, in varying sizes, or for desired periods of time. For the first time in a multicellular living embryo, these studies demonstrate that temperature-mediated ELP assembly can reversibly manipulate assembly of subcellular protein complexes, which may have applications in the study and manipulation of in vivo biological functions.

A new temperature-dependent strategy to modulate the epidermal growth factor receptor

The dynamic manipulation of kinases remains a major obstacle to unraveling cell-signaling networks responsible for the activation of biological systems. For example, epidermal growth factor (EGF) stimulates the epidermal growth factor receptor (EGFR/ErbB1); however, EGF also recruits other kinases (HER2/ErbB2) involved with various signaling pathways. To better study EGFR we report a new strategy to selectively activate receptor tyrosine kinases fused to elastin-like polypeptides (ELPs), which can be visualized inside mammalian cells using fixed and live-cell fluorescence microscopy. ELPs are high molecular weight polypeptides that phase separate abruptly upon heating. When an EGFR-ELP fusion is heated, it clusters, initiates receptor internalization, phosphorylates, initiates downstream kinase signaling, and undergoes retrograde transport towards the cell body. Unlike other strategies to block EGFR (small molecule inhibitors, RNAi, or transcriptional regulators), EGFR-ELP clustering can be specifically switched on or off within minutes. Live-cell imaging suggests that EGFR-ELPs assemble in most cells with only a 3 °C increase in temperature. This strategy was found reversible and able to dynamically control the downstream phosphorylation/activation of the ERK1/2 pathway. For the first time, this strategy enables the rational engineering of specific temperature-sensitive receptors that may have broad applications in the study and manipulation of biological processes.

Convergence of Artificial Protein Polymers and Intrinsically Disordered Proteins

A flurry of research in recent years has revealed the molecular origins of many membraneless organelles to be the liquid phase separation of intrinsically disordered proteins (IDPs). Consequently, protein disorder has emerged as an important driver of intracellular compartmentalization by providing specialized microenvironments chemically distinct from the surrounding medium. Though the importance of protein disorder and its relationship to intracellular phase behavior are clear, a detailed understanding of how such phase behavior can be predicted and controlled remains elusive. While research in IDPs has largely focused on the implications of structural disorder on cellular function and disease, another field, that of artificial protein polymers, has focused on the de novo design of protein polymers with controllable material properties. A subset of these polymers, specifically those derived from structural proteins such as elastin and resilin, are also disordered sequences that undergo liquid-liquid phase separation. This phase separation has been used in a variety of biomedical applications, and researchers studying these polymers have developed methods to precisely characterize and tune their phase behavior. Despite their disparate origins, both fields are complementary as they study the phase behavior of intrinsically disordered polypeptides. This Perspective hopes to stimulate collaborative efforts by highlighting the similarities between these two fields and by providing examples of how such collaboration could be mutually beneficial.

Elastin-like polypeptide switches: A design strategy to detect multimeric proteins

Elastin-Like Polypeptides (ELPs) reversibly phase separate in response to changes in temperature, pressure, concentration, pH, and ionic species. While powerful triggers, biological microenvironments present a multitude of more specific biological cues, such as antibodies, cytokines, and cell-surface receptors. To develop better biosensors and bioresponsive drug carriers, rational strategies are required to sense and respond to these target proteins. We recently reported that noncovalent association of two ELP fusion proteins to a "chemical inducer of dimerization" small molecule (1.5 kDa) induces phase separation at physiological temperatures. Having detected a small molecule, here we present the first evidence that ELP multimerization can also detect a much larger (60 kDa) protein target. To demonstrate this strategy, ELPs were biotinylated at their amino terminus and mixed with tetrameric streptavidin. At a stoichiometric ratio of [4:1], two to three biotin-ELPs associate with streptavidin into multimeric complexes with an apparent K_d of 5 nM. The increased ELP density around a streptavidin core strongly promotes isothermal phase separation, which was tuned to occur at physiological temperature. This phase separation reverses upon saturation with excess streptavidin, which only favors [1:1] complexes. Together, these findings suggest that ELP association with multimeric biomolecules is a viable strategy to deliberately engineer ELPs that respond to multimeric protein substrates.

Elastin-like polypeptides: Therapeutic applications for an emerging class of nanomedicines

Elastin-like polypeptides (ELPs) constitute a genetically engineered class of 'protein polymers' derived from human tropoelastin. They exhibit a reversible phase separation whereby samples remain soluble below a transition temperature (Tt) but form amorphous coacervates above Tt. Their phase behavior has many possible applications in purification, sensing, activation, and nanoassembly. As humanized polypeptides, they are non-immunogenic, substrates for proteolytic biodegradation, and can be decorated with pharmacologically active peptides, proteins, and small molecules. Recombinant synthesis additionally allows precise control over ELP architecture and molecular weight, resulting in protein polymers with uniform physicochemical properties suited to the design of multifunctional biologics. As such, ELPs have been employed for various uses including as anti-cancer agents, ocular drug delivery vehicles, and protein trafficking modulators. This review aims to offer the reader a catalogue of ELPs, their various applications, and potential for commercialization across a broad spectrum of fields.

Engineering structure and function using thermoresponsive biopolymers

Self-assembly enables exquisite control at the smallest scale and generates order among macromolecular-building blocks that remain too small to be manipulated individually. Environmental cues, such as heating, can trigger the organization of these materials from individual molecules to multipartixcle assemblies with a variety of compositions and functions. Synthetic as well as biological polymers have been engineered for these purposes; however, biological strategies can offer unparalleled control over the composition of these macromolecular-building blocks. Biologic polymers are macromolecules composed of monomeric units that can be precisely tailored at the genetic level; furthermore, they can often utilize endogenous biodegradation pathways, which may enhance their potential clinical applications. DNA (nucleotides), polysaccharides (carbohydrates), and proteins (amino acids) have all been engineered to self-assemble into nanostructures in response to a change in temperature. This focus article reviews the growing body of literature exploring temperature-dependent nano-assembly of these biological macromolecules, summarizes some of their physical properties, and discusses future directions.

Controlled release from recombinant polymers

Recombinant polymers provide a high degree of molecular definition for correlating structure with function in controlled release. The wide array of amino acids available as building blocks for these materials lend many advantages including biorecognition, biodegradability, potential biocompatibility, and control over mechanical properties among other attributes. Genetic engineering and DNA manipulation techniques enable the optimization of structure for precise control over spatial and temporal release. Unlike the majority of chemical synthetic strategies used, recombinant DNA technology has allowed for the production of monodisperse polymers with specifically defined sequences. Several classes of recombinant polymers have been used for controlled drug delivery. These include, but are not limited to, elastin-like, silk-like, and silk-elastinlike proteins, as well as emerging cationic polymers for gene delivery. In this article, progress and prospects of recombinant polymers used in controlled release will be reviewed.

Flipping the Switch on Clathrin-Mediated Endocytosis using Thermally Responsive Protein Microdomains

A ubiquitous approach to study protein function is to knock down activity (gene deletions, siRNA, small molecule inhibitors, etc) and study the cellular effects. Using a new methodology, this manuscript describes how to rapidly and specifically switch off cellular pathways using thermally responsive protein polymers. A small increase in temperature stimulates cytosolic elastin-like polypeptides (ELPs) to assemble microdomains. We hypothesize that ELPs fused to a key effector in a target macromolecular complex will sequester the complex within these microdomains, which will bring the pathway to a halt. To test this hypothesis, we fused ELPs to clathrin-light chain (CLC), a protein associated with clathrin-mediated endocytosis. Prior to thermal stimulation, the ELP fusion is soluble and clathrin-mediated endocytosis remains 'on.' Increasing the temperature induces the assembly of ELP fusion proteins into organelle-sized microdomains that switches clathrin-mediated endocytosis 'off.' These microdomains can be thermally activated and inactivated within minutes, are reversible, do not require exogenous chemical stimulation, and are specific for components trafficked within the clathrin-mediated endocytosis pathway. This temperature-triggered cell switch system represents a new platform for the temporal manipulation of trafficking mechanisms in normal and disease cell models and has applications for manipulating other intracellular pathways.

An amphipathic alpha-helical peptide from apolipoprotein A1 stabilizes protein polymer vesicles

L4F, an alpha helical peptide inspired by the lipid-binding domain of the ApoA1 protein, has potential applications in the reduction of inflammation involved with cardiovascular disease as well as an antioxidant effect that inhibits liver fibrosis. In addition to its biological activity, amphipathic peptides such as L4F are likely candidates to direct the molecular assembly of peptide nanostructures. Here we describe the stabilization of the amphipathic L4F peptide through fusion to a high molecular weight protein polymer. Comprised of multiple pentameric repeats, elastin-like polypeptides (ELPs) are biodegradable protein polymers inspired from the human gene for tropoelastin. Dynamic light scattering confirmed that the fusion peptide forms nanoparticles with a hydrodynamic radius of approximately 50nm, which is unexpectedly above that observed for the free ELP (~5.1nm). To further investigate their morphology, conventional and cryogenic transmission electron microscopy were used to reveal that they are unilamellar vesicles. On average, these vesicles are 49nm in radius with lamellae 8nm in thickness. To evaluate their therapeutic potential, the L4F nanoparticles were incubated with hepatic stellate cells. Stellate cell activation leads to hepatic fibrosis; furthermore, their activation is suppressed by anti-oxidant activity of ApoA1 mimetic peptides. Consistent with this observation, L4F nanoparticles were found to suppress hepatic stellate cell activation in vitro. To evaluate the in vivo potential for these nanostructures, their plasma pharmacokinetics were evaluated in rats. Despite the assembly of nanostructures, both free L4F and L4F nanoparticles exhibited similar half-lives of approximately 1h in plasma. This is the first study reporting the stabilization of peptide-based vesicles using ApoA1 mimetic peptides fused to a protein polymer; furthermore, this platform for peptide-vesicle assembly may have utility in the design of biodegradable nanostructures.

Genetically engineered nanocarriers for drug delivery

Cytotoxicity, low water solubility, rapid clearance from circulation, and off-target side-effects are common drawbacks of conventional small-molecule drugs. To overcome these shortcomings, many multifunctional nanocarriers have been proposed to enhance drug delivery. In concept, multifunctional nanoparticles might carry multiple agents, control release rate, biodegrade, and utilize target-mediated drug delivery; however, the design of these particles presents many challenges at the stage of pharmaceutical development. An emerging solution to improve control over these particles is to turn to genetic engineering. Genetically engineered nanocarriers are precisely controlled in size and structure and can provide specific control over sites for chemical attachment of drugs. Genetically engineered drug carriers that assemble nanostructures including nanoparticles and nanofibers can be polymeric or non-polymeric. This review summarizes the recent development of applications in drug and gene delivery utilizing nanostructures of polymeric genetically engineered drug carriers such as elastin-like polypeptides, silk-like polypeptides, and silk-elastin-like protein polymers, and non-polymeric genetically engineered drug carriers such as vault proteins and viral proteins.

Triggered sorting and co-assembly of genetically engineered protein microdomains in the cytoplasm

Elastin-like polypeptides (ELPs) are genetically encoded protein polymers that reversibly phase separate in response to stimuli. They respond sharply to small shifts in temperature and form dense microdomains in the living eukaryotic cytosol. For the first time, this communication illustrates how to tune the ELP sequence and architecture for either co-assembly or sorting of distinct proteins into microdomains within a living cell.

A rapamycin-binding protein polymer nanoparticle shows potent therapeutic activity in suppressing autoimmune dacryoadenitis in a mouse model of Sjögren's syndrome

Sjögren's syndrome (SjS) is a chronic autoimmune disease characterized initially by lymphocytic infiltration and destruction of exocrine glands, followed by systemic organ damage and B-cell lymphoma. Conventional treatment is based on management of symptoms and there is a shortage of therapies that address the underlying causes of inflammation at source exocrine tissue. The aim of this study was to test a novel protein polymer-based platform consisting of diblock copolymers composed from Elastin-like Polypeptides (ELPs) fused with FKBP12, to deliver a potent immunosuppressant with dose-limiting toxicity, rapamycin (Rapa) also known as Sirolimus, and evaluate its effects on the inflamed lacrimal gland (LG) of non-obese diabetic mouse (NOD), a classic mouse model of SjS. Both soluble and diblock copolymer ELPs were fused to FKBP12 and characterized with respect to purity, hydrodynamic radii, drug entrapment and release. Both formulations showed successful association with Rapa; however, the nanoparticle formulation, FSI, released drug with nearly a 5 fold longer terminal half-life of 62.5h. The strong interaction of FSI nanoparticles with Rapa was confirmed in vivo by a shift in the monoexponential pharmacokinetic profile for free drug to a biexponential profile for the nanoparticle formulation. When acutely administered by injection into NOD mice via the tail vein, this FSI formulation significantly suppressed lymphocytic infiltration in the LG relative to the control group while reducing toxicity. There was also a significant effect on inflammatory and mammalian target of Rapamycin (mTOR) pathway genes in the LG and surprisingly, our nanoparticle formulation was significantly better at decreasing a proposed tear biomarker of SjS, cathepsin S (CATS) compared to free drug. These findings suggest that FSI is a promising tool for delivering Rapa for treatment of SjS in a murine model and may be further explored to meet the unmet medical challenge of SjS.

Switchable elastin-like polypeptides that respond to chemical inducers of dimerization

Elastin-like polypeptides (ELPs) are protein polymers that reversibly phase separate in response to increased temperature, pressure, concentration, ionic strength, and molecular weight. If it were possible to engineer their phase separation to respond to specific molecular substrates, ELP fusion proteins might be engineered as biosensors, smart biomaterials, diagnostic imaging agents, and targeted therapies. What has been lacking is a strategy to design ELPs to respond to specific substrates. To address this deficiency, we report that ELP fusion proteins phase separate in response to chemical inducers of dimerization (CID). The rationale is that ELP phase separation depends on molecular weight, concentration, and local hydrophobicity; therefore, processes that affect these properties, including noncovalent dimerization, can be tuned to produce isothermal phase separation. To test this hypothesis, constructs were evaluated consisting of an immunophilin: human FK-506 binding protein 12 (FKBP) attached to an ELP. Under stoichiometric binding of a CID, the fusion protein homodimerizes and triggers phase separation. This dimerization is reversible upon saturation with excess CID or competitive binding of a small lipophilic macrolide to FKBP. By modulating the ELP molecular weight, phase separation was tuned for isothermal response to CID at physiological ionic strength and temperature (37 °C). To interpret the relationship between transition temperature and equilibrium binding constants, an empirical mathematical model was employed. To the best of our knowledge, this report is the first demonstration of reversible ELP switching in response to controlled dimerization. Due to its simplicity, this strategy may be useful to design ELP fusion proteins that respond to specific dimeric biological entities.