Broad-Spectrum Antimicrobial Polycarbonate Hydrogels with Fast Degradability

Structure-activity relationship of drug conjugated polymeric materials against uropathogenic bacteria colonization under in vitro and in vivo settings

The human world has been plagued with different kinds of bacterial infections from time immemorial. The increased development of resistance towards commercial antibiotics has made these bacterial infections an even more critical challenge. Bacteria have modified their mode of interactions with different types of commercial drugs by bringing changes to the receptor proteins or by other resisting mechanisms like drug efflux. Various chemical approaches have been made to date to fight against these smart adapting species. Towards this, we hypothesize chemically modifying the commercial antibacterial drugs in order to deceive the bacteria and destroy the bacterial biomass. In this study, different molecular weight polyethyleneimines are taken and conjugated with some well-known commercial drugs like penicillin and chloramphenicol to explore their antibacterial properties against some of the laboratory and uro-pathogenic strains of Gram-positive and Gram-negative bacteria. A detailed structure-activity relationship of these polymeric prodrug-like materials has been evaluated to determine the optimum formulation. The standardized system not only shows significant ∼90% bacterial killing in liquid broth culture, but also demonstrates promising bacterial inhibition towards biofilm formation for the pathogenic strains on inanimate surfaces like urinary catheters and on an in vivo mouse skin abrasion model. The reported bioactive polymeric materials can be successfully used for widespread therapeutic applications with promising medical relevance.

Ring-opening metathesis polymerization of N-methylpyridinium-fused norbornenes to access antibacterial main-chain cationic polymers

Cationic polymers have been identified as a promising type of antibacterial molecules, whose bioactivity can be tuned through structural modulation. Recent studies suggest that the placement of the cationic groups close to the core of the polymeric architecture rather than on appended side chains might improve both their bioactivity and selectivity for bacterial cells over mammalian cells. However, antibacterial main-chain cationic polymers are typically synthesized via polycondensations, which do not afford precise and uniform molecular design. Therefore, accessing main-chain cationic polymers with high degrees of molecular tunability hinges upon the development of controlled polymerizations tolerating cationic motifs (or cation progenitors) near the propagating species. Herein, we report the synthesis and ring-opening metathesis polymerization (ROMP) of N-methylpyridinium-fused norbornene monomers. The identification of reaction conditions leading to a well-controlled ROMP enabled structural diversification of the main-chain cationic polymers and a study of their bioactivity. This family of polyelectrolytes was found to be active against both Gram-negative (Escherichia coli) and Gram-positive (Methicillin-resistant Staphylococcus aureus) bacteria with minimal inhibitory concentrations as low as 25 µg/mL. Additionally, the molar mass of the polymers was found to impact their hemolytic activity with cationic polymers of smaller degrees of polymerization showing increased selectivity for bacteria over human red blood cells.

Nucleoside-Derived Metallohydrogel Induces Cell Death in Leishmania Parasites

Self-assembled hydrogels by virtue of their unique 3D network and tunability have extensively been explored for bio-medical applications like tissue engineering, delivery and release of therapeutic agents, etc. Herein, we demonstrate for the first-time nucleoside-based biocompatible hydrogels with a remarkable leishmanicidal effect against both Leishmania major promastigotes and amastigotes and no cytotoxic effect on the macrophage cell line. In this work, a series of biocompatible hydrogels have been synthesized by silver ion-driven self-assembly of natural nucleoside and nucleotide-like cytidine and 5'-GMP. The supramolecular metallogel obtained from the assembly of cytidine and boronic acid is capable of inducing apoptotic-like cell death of protozoan parasite by causing damage to the membrane as well as DNA. These hydrogels could find promising applications in combating cutaneous leishmaniasis by topical treatment.

Cordierite@MOFs with Easy Recovery in CO2 Cycloaddition

The objective of this research is to create monolithic heterogeneous catalysts (cordierite@MOFs) through the application of metal-organic framework (MOF) materials onto honeycomb cordierite for CO2 cycloaddition. By employing monolithic catalysts instead of powdered catalysts, the recycling and reusability of catalysts during postreaction treatment can be significantly improved.

Unraveling the New Perspectives on Antimicrobial Hydrogels: State-of-the-Art and Translational Applications

The growing impact of infections and the rapid emergence of antibiotic resistance represent a public health concern worldwide. The exponential development in the field of biomaterials and its multiple applications can offer a solution to the problems that derive from these situations. In this sense, antimicrobial hydrogels represent a promising opportunity with multiple translational expectations in the medical management of infectious diseases due to their unique physicochemical and biological properties as well as for drug delivery in specific areas. Hydrogels are three-dimensional cross-linked networks of hydrophilic polymers that can absorb and retain large amounts of water or biological fluids. Moreover, antimicrobial hydrogels (AMH) present good biocompatibility, low toxicity, availability, viscoelasticity, biodegradability, and antimicrobial properties. In the present review, we collect and discuss the most promising strategies in the development of AMH, which are divided into hydrogels with inherent antimicrobial activity and antimicrobial agent-loaded hydrogels based on their composition. Then, we present an overview of the main translational applications: wound healing, tissue engineering and regeneration, drug delivery systems, contact lenses, 3D printing, biosensing, and water purification.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Ultralow Charge Voltage Triggering Exceptional Post-Charging Antibacterial Capability of Co3 O4 /MnOOH Nanoneedles for Skin Infection Treatment

The post-charging antibacterial therapy is highly promising for treatment of Gram-negative bacterial wound infections. However, the therapeutic efficacy of the current electrode materials is yet unsatisfactory due to their low charge storage capacity and limited reactive oxygen species (ROS) yields. Herein, the design of MnOOH decorated Co₃ O₄ nanoneedles (MCO) with exceptional post-charging antibacterial effect against Gram-negative bacteria at a low charge voltage and their implementation as a robust antibacterial electrode for skin wound treatment are reported. Taking advantaging of the increased active sites and enhanced OH^- adsorption capability, the charge storage capacity and ROS production of the MCO electrode are remarkably boosted. As a result, the MCO electrode after charging at an ultralow voltage of 1.4 V gives a 5.49 log and 5.82 log bacterial reduction in Escherichia coli (E. coli) and Pseudomonas aeruginosa (P. aeruginosa) within an incubation time of only 5 min, respectively. More importantly, the antibacterial efficiency of the MCO electrode against multi-drug resistant (MDR) bacteria including Klebsiella pneumoniae (K. pneumoniae) and Acinetobacter baumannii (A. baumannii) also reaches 99.999%. In addition, the MCO electrode exhibits excellent reusability, and the role of extracellular ROS in enhancing post-charging antibacterial activity is also unraveled.

Antifouling and Antibacterial Surfaces Grafted with Sulfur-Containing Copolymers

Antifouling and antibacterial surfaces that can prevent nonspecific biological adhesion are important to support a myriad of biomedical applications. In this study, we have used an innovative photopolymerization technology to develop sulfur-containing polymer-grafted antifouling and antibacterial surfaces. The relationship between the hydrophilic property and the capability to resist protein and macrophage adsorption of the surface copolymer brushes was investigated. The sulfide monomer incorporated into the surface copolymer brushes can be further ionized to carry positive charges and impart antibacterial activity, leading to surfaces with dual antifouling and antibacterial functions. We believe that the reported sulfur-containing polymer brushes can be considered an emerging and important polymer for antifouling and antibacterial applications.

Preparation of CO2 -based Cationic Polycarbonate/Polyacrylonitrile Nanofibers with an Optimal Fibrous Microstructure for Antibacterial Applications

Utilizing CO₂ as one of the monomer resource, poly(vinylcyclohexene carbonates) (PVCHCs) are used as the precursor for preparing cationic PVCHCs (CPVCHCs) via thiol-ene click functionalization. Through the functionalization, CPVCHC-43 with a tertiary amine density of 43% relative to the backbone is able to display a significantly antibacterial ability against Staphylococcus aureus (S. aureus). Blending CPVCHC-43 with polyacrylonitrile (PAN), CPVCHC/PAN nanofiber meshes (NFMs) have been successfully prepared by electrospinning. More importantly, two crucial fibrous structural factors including CPVCHC/PAN weight ratio and fiber diameter have been systematically investigated for the effects on the antibacterial performance of the NFMs. Sequentially, a quaternization treatment has been employed on the NFMs with an optimal fibrous structure to enhance the antibacterial ability. The resulting quaternized NFMs have demonstrated the great biocidal effects against Gram-positive and Gram-negative bacteria. Moreover, the excellent biocompatibility of the quaternized NFMs have also been thoroughly evaluated and verified. This article is protected by copyright. All rights reserved.

Simple and Efficient Synthesis of Functionalized Cyclic Carbonate Monomers Using Carbon Dioxide

Aliphatic polycarbonates represent an important class of materials with diverse applications ranging from battery electrolytes, polyurethane intermediates, and materials for biomedical applications. These materials can be produced via the ring-opening polymerization (ROP) of six- to eight-membered cyclic carbonates derived from precursor 1,3- and 1,5-diols. These diols can contain a range of functional groups depending on the desired thermal, mechanical, and solution properties. Generally, the ring closure to form the cyclic carbonate requires the use of undesirable and hazardous reagents. Advances in synthetic methodologies and catalysis have enabled the use of carbon dioxide (CO₂) to perform these transformations with a high conversion of diol to cyclic carbonate, yet modest isolated yields due to oligomerization side reactions. In this Letter, we evaluate a series of bases in the presence of p-toluenesulfonyl chloride and the appropriate diol to better understand their effect on the yield and presence of oligomer byproducts during cyclic carbonate formation from CO₂. From this study, N,N-tetramethylethylenediamine (TMEDA) was identified as an optimal base, facilitating the preparation of a diverse array of both six- and eight-membered carbonates from CO₂ within 10 to 15 min. The robust conditions for both, the preparation of the diol precursor, and the TMEDA-mediated carbonate synthesis enabled readily telescoping the two-step reaction sequence, greatly simplifying the process of monomer preparation.

Catalytic Performance of CPM-200-In/Mg in the Cycloaddition of CO2 and Epoxides

Crystalline porous materials (CPM)-200-In and CPM-200-In/Mg metal-organic frameworks (MOFs) were synthesized by a solvothermal method and were characterized by using powder X-ray diffraction (PXRD), FT-IR, Brunauer–Emmett–Teller (BET), temperature programmed desorption (TPD), TGA, XPS, and SEM-EDS. They were used as heterogeneous catalysts for the cycloaddition of CO2 with epoxides and found to be highly efficient toward the cycloaddition reaction at moderate reaction conditions under solvent-free conditions. The catalyst was easily separated by a simple filtration and can be reused up to five consecutive times without any considerable decrease of its initial activity. CPM-200-In/Mg showed excellent catalytic performance in the cycloaddition reaction due to the synergistic role of the acidic sites and basic sites. A plausible reaction mechanism for the CPM-200-In/Mg MOF catalyzed cycloaddition reaction is proposed based on the experimental results and our previously reported DFT (Density Functional Theory) studies.

Combating drug-resistant bacterial infection using biodegradable nanoparticles assembled from comb-like polycarbonates grafted with amphiphilic polyquaternium

Bacterial infection is a serious clinical threat. The misuse of antibiotics has already resulted in the emergence of antibiotic-resistant strains of pathogenic bacteria. Efficient membrane-destructive antibacterial agents are considered as an alternative, promising solution against bacterial infection. Herein, we prepared a new type of comb-like cationic, polyethylene glycol (PEG) block polycarbonates with polyquaternium arms (G-CgQAs). The amphiphilic G-CgQAs could self-assemble into about 60 nm sized nanoparticles (NPs) with positive charges (20~30 mV). G-CgQA-3 NPs with an appropriate hydrophobic-hydrophilic balance in the polyquaternium arms showed antibacterial activity against Gram-negative, Gram-positive, and drug-resistant strains at low concentrations (MIC 64-128 μg mL-1) and low hemolysis (HC50 > 2000 μg mL-1). In vivo anti-infection tests indicated G-CgQA-3 NPs could highly inhibit the growth of vancomycin-resistant bacteria by spraying on wounds. Collectively, G-CgQA NPs hold great promise for the prevention of infection, serving as new antibacterial agents. This study also highlights the significance of a hydrophobic block in positive polyquaternium arms to facilitate the antibacterial activity of cationic, quaternized polymers. The design of comb-like amphiphilic cationic polycarbonates provides a new method for manufacturing antibacterial nano-agents.

A Tough Polysaccharide-Based Hydrogel with an On-Demand Dissolution Feature for Chronic Wound Care through Light-Induced Ultrafast Degradation

Repeatedly changing dressings during wound healing can cause unbearable physical pain for patients with chronic skin injury. In this study, we designed a tough hydrogel-based dressing that can be degraded in an on-demand fashion for advanced chronic wound care. The resultant hydrogel dressing could be rapidly dissolved within 100 s after wetting with lithium phenyl(2,4,6-trimethylbenzonyl)phosphinate solution under low-power (1 W) ultraviolet (UV) irradiation (365 nm) owing to the breakage of disulfide bonds. This UV-triggered on-demand dissolution of tough hydrogels allows for a facile dressing replacement without causing tissue damage or pain, which is of great potential for clinical utilization.

Antibacterial activity of antimicrobial peptide-conjugated nanofibrous membranes

Antimicrobial peptides (AMPs) are considered as novel potential alternatives to antibiotics against increasing number of multi drug resistant (MDR) pathogens. Although AMPs have shown strong antimicrobial activity against gram-negative or gram-positive microorganisms, AMP conjugated biomaterials that are effective against MDR microorganisms are yet to be developed. Herein, the potential use of (RWRWRWRW)-NH2 (AMP-1) and KRFRIRVRV-NH2 (AMP-2) peptide conjugated electrospun polylactic-co-glycolic-acid (PLGA) nanofibers (NFs) fabricated and their antimicrobial effect by themselves and in their dual combination (1:1) were evaluated on P. aeruginosa and methicillin-resistant S. aureus (MRSA). Those AMP conjugated NFs did not inhibit proliferation of keratinocytes. These results suggest that AMP conjugated NF, which has multiple biological activities, would be a promising candidate as a wound dressing material.

Synthesis, Characterization, and Antimicrobial Evaluation of Random Poly(ester-Carbonate)s Bearing Pendant Primary Amine in the Main Chain

Starting from primary amine bearing cyclic carbonate tert-butyl-(2-oxo-1,3-dioxan-5-yl) carbamate (TBODC) and caprolactone (CL), amphiphilic poly(caprolactone-ran-amino trimethyl carbonate)s (P(CL-ran-ATC)s) random copolymers with controlled molecular weight and composition were synthesized via ring opening polymerization (ROP) and deprotection, using stannous octoate (Sn(Oct)₂) as catalyst and benzyl alcohol (BnOH) as initiator. Therefore, hydrophilic/lipophilic ratio (HLR) of the P(CL-ran-ATC)s copolymers can be finely adjusted by the feed ratio of TBODC and CL. The antimicrobial activity against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) of P(CL-ran-ATC)s were proportional to HLR, and P(CL-ran-ATC)s presented more vigorous bactericidal activity towards S. aureus. The minimum inhibitory concentration (MIC) values of P(CL-ran-ATC 50.9%) are 2000 μg mL^-1 and 3000 μg mL^-1 for S. aureus and E. coli. While P(CL-ran-ATC 50.9%) exhibited deficient hemolytic activity as 1.41%. In addition, the P(CL-ran-ATC)s showed extremely low cytotoxicity towards fibroblast L929 cells.

Organocatalytic Synthesis of Alkyne-Functional Aliphatic Polycarbonates via Ring-Opening Polymerization of an Eight-Membered-N-Cyclic Carbonate

The synthesis of well-defined propargyl-functional aliphatic polycarbonates is achieved via the organocatalytic ring-opening polymerization of prop-2-yn-1-yl 2-oxo-1,3,6-dioxazocane-6-carboxylate (P-8NC) using a wide variety of commercially available or readily made, shelf-stable organocatalysts. The resulting homopolymers show low dispersities and end-group fidelity, with the versatility of the system being demonstrated by the synthesis of telechelic copolymers and block copolymers with molar mass up to 40 kDa.

Fast-Acting Antibacterial, Self-Deactivating Polyionene Esters

Biocidal compounds that quickly kill bacterial cells and are then deactivated in the surrounding without causing environmental problems are of great current interest. Here, we present new biodegradable antibacterial polymers based on polyionenes with inserted ester functions (PBI esters). The polymers are prepared by polycondensation reaction of 1,4-dibromobutene and different tertiary diaminodiesters. The resulting PBI esters are antibacterially active against a wide range of bacterial strains and were found to quickly kill these cells within 1 to 10 min. Because of hydrolysis of the ester groups, the PBI esters are degraded and deactivated in aqueous media. The degradation rate depends on the backbone structure and the pH. The structure of the polymers also controls the deactivation mechanism. While the more hydrophilic polymers require hydrolyses of only 19 to 30% of the ester groups to become practically inactive, the more hydrophobic PBI esters require up to 85% hydrolysis to achieve the same result. Thus, depending on the environmental conditions and the chemical nature, the PBI esters can be active for only 20 min or for at least one week.

Tissue Engineering and Regenerative Medicine in Craniofacial Reconstruction and Facial Aesthetics

The craniofacial region is anatomically complex and is of critical functional and cosmetic importance, making reconstruction challenging. The limitations of current surgical options highlight the importance of developing new strategies to restore the form, function, and esthetics of missing or damaged soft tissue and skeletal tissue in the face and cranium. Regenerative medicine (RM) is an expanding field which combines the principles of tissue engineering (TE) and self-healing in the regeneration of cells, tissues, and organs, to restore their impaired function. RM offers many advantages over current treatments as tissue can be engineered for specific defects, using an unlimited supply of bioengineered resources, and does not require immunosuppression. In the craniofacial region, TE and RM are being increasingly used in preclinical and clinical studies to reconstruct bone, cartilage, soft tissue, nerves, and blood vessels. This review outlines the current progress that has been made toward the engineering of these tissues for craniofacial reconstruction and facial esthetics.

Bio-Based Thermo-Reversible Aliphatic Polycarbonate Network

Aliphatic polycarbonates represent an important class of materials with notable applications in the biomedical field. In this work, low Tg furan-functionalized bio-based aliphatic polycarbonates were cross-linked thanks to the Diels-Alder (DA) reaction with a bis-maleimide as the cross-linking agent. The thermo-reversible DA reaction allowed for the preparation of reversible cross-linked polycarbonate materials with tuneable properties as a function of the pendent furan content that was grafted on the polycarbonate backbone. The possibility to decrosslink the network around 70 °C could be an advantage for biomedical applications, despite the rather poor thermal stability of the furan-functionalized cross-linked polycarbonates.

Preparation of cationic polyelectrolyte grafted polyvinyl alcohol-formaldehyde macroporous hydrogels and their antibacterial properties

A series of novel antibacterial porous cationic PVF-g-PDMC hydrogels, synthesized by radical polymerization using ceric ammonium nitrate as an initiator, show excellent antibacterial properties, and can be used as biomedical materials.

Functional biodegradable polymers via ring-opening polymerization of monomers without protective groups

Biodegradable polymers are of current interest and chemical functionality in such materials is often demanded in advanced biomedical applications. Functional groups often are not tolerated in the polymerization process of ring-opening polymerization (ROP) and therefore protective groups need to be applied. Advantageously, several orthogonally reactive functions are available, which do not demand protection during ROP. We give an insight into available, orthogonally reactive cyclic monomers and the corresponding functional synthetic and biodegradable polymers, obtained from ROP. Functionalities in the monomer are reviewed, which are tolerated by ROP without further protection and allow further post-modification of the corresponding chemically functional polymers after polymerization. Synthetic concepts to these monomers are summarized in detail, preferably using precursor molecules. Post-modification strategies for the reported functionalities are presented and selected applications highlighted.

Biodegradable Polycarbonate Iongels for Electrophysiology Measurements

In recent years, gels based on ionic liquids incorporated into polymer matrices, namely iongels, have emerged as long-term contact media for cutaneous electrophysiology. Iongels possess high ionic conductivity and negligible vapor pressure and can be designed on demand. In spite of the extensive efforts devoted to the preparation of biodegradable ionic liquids, the investigations related to the preparation of iongels based on biodegradable polymers remain scarce. In this work, biodegradable polycarbonate-based iongels are prepared by ring-opening polymerization of N-substituted eight ring membered cyclic carbonate monomers in the presence of imidazolium lactate ionic liquid. Our iongels are able to take up 10⁻30 wt % of ionic liquid and become softer materials by increasing the amount of free ionic liquid. Rheological measurements showed that the cross-over point between the storage modulus G' and loss modulus G″ occurs at lower angular frequencies when the loading of free ionic liquid increases. These gels are able to take up to 30 wt % of the ionic liquid and the ionic conductivity of these gels increased up to 5 × 10-4 S·cm-1 at 25 °C as the amount of free ionic liquid increased. Additionally, we assess the biodegradation studies of the iongels by immersing them in water. The iongels decrease the impedance with the human skin to levels that are similar to commercial Ag/AgCl electrodes, allowing an accurate physiologic signals recording. The low toxicity and biodegradability of polycarbonate-based iongels make these materials highly attractive for cutaneous electrophysiology applications.

Cholesterol functionalized aliphatic N-substituted 8-membered cyclic carbonate

Straightforward synthesis of cholesterol functionalized aliphatic N-substituted 8-membered cyclic carbonate (Chol-8m) monomer is reported. Well-defined poly(ethylene glycol) (PEG) diblock copolymers were readily accessed via organo catalytic ring opening polymerization. These polymers show promise as building blocks for self-assembled nanostructures and steric stabilizers for liposomes.

Simple and Efficient Approach toward Photosensitive Biobased Aliphatic Polycarbonate Materials

Fatty acids were used as precursors for the synthesis of photosensitive polycarbonate materials. In order to avoid multistep reactions, a simple and straightforward methodology toward the synthesis of photosensitive monomers has been developed. Hence, a fatty acid-based cyclic carbonate bearing an unsaturation was synthesized and subsequently polymerized in a controlled manner (Đ = 1.07) by organo-catalyzed ring-opening polymerization (ROP). A thio-cinnamate derivative was then readily synthesized via a one-pot reaction and grafted onto the polycarbonate backbone by thiol-ene reaction. The content of photoresponsive cinnamoyl moiety grafted on the polycarbonate was tunable with the reaction time. Such functionalized polycarbonates could be crosslinked (by UV irradiation at 365 nm) and partially decrosslinked (irradiated at 254 nm) and exhibit versatile properties ranging from rather tough materials to elastomeric networks with respect to the content of the photosensitive cinnamoyl moiety grafted on the polymer.

Efficient polymerization and post-modification of N-substituted eight-membered cyclic carbonates containing allyl groups

Aliphatic polycarbonates are promising materials in the biomedical field due to their low toxicity, biocompatibility, and biodegradability.

Antibacterial activity of cationic polymers: side-chain or main-chain type?

Imidazolium (Im), quaternary ammonium (Qa), and 1,4-diazabicyclo[2.2.2]octane-1,4-diium (DABCO-diium) cation-based small molecule cationic compounds and their corresponding side-chain/main-chain cationic polymers were synthesized.

Broad Spectrum Macromolecular Antimicrobials with Biofilm Disruption Capability and In Vivo Efficacy

In this study, antimicrobial polymers are synthesized by the organocatalytic ring-opening polymerization of an eight-membered heterocyclic carbonate monomer that is subsequently quaternized with methyl iodide. These polymers demonstrate activity against clinically relevant Gram-positive Staphylococcus epidermidis and Staphylococcus aureus, Gram-negative Escherichia coli and Pseudomonas aeruginosa, and fungus Candida albicans with fast killing kinetics. Importantly, the polymer efficiently inhibits biofilm growth and lyses existing biofilm, leading to a reduction in biomass and cell viability. In addition, the macromolecular antimicrobial is less likely to induce resistance as it acts via a membrane-lytic mechanism. The polymer is not cytotoxic toward mammalian cells with LD₅₀ of 99.0 ± 11.6 mg kg^-1 in mice through i.v. injection. In an S. aureus blood stream infection mouse model, the polymer removes bacteria from the blood more rapidly than the antibiotic Augmentin. At the effective dose, the polymer treatment does not damage liver and kidney tissues or functions. In addition, blood electrolyte balance remains unchanged after the treatment. The low cost of starting materials, ease of synthesis, nontoxicity, broad spectrum activity with fast killing kinetics, and in vivo antimicrobial activity make these macromolecular antimicrobials ideal candidates for prevention of sepsis and treatment of infections.

Metal-Containing Poly(ionic liquid) Membranes for Antibacterial Applications

Imidazolium-type metal-containing ionic liquid (IL) monomers and their corresponding poly(ionic liquid) (PIL) membranes coordinated with CuCl₂ (PILM-Cu), FeCl₃ (PILM-Fe), or ZnCl₂ (PILM-Zn) were synthesized. The effect of metal ions on the antimicrobial activities against both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) was investigated. Compared with pristine PILM-Br membrane, PILM-Cu, PILM-Fe, and PILM-Zn membranes exhibit enhanced antibacterial activities due to the attributes of both imidazolium cations and metal-containing anions. Furthermore, all of the metal-containing PIL membranes present low hemolysis toward human red blood cell and high long-term antibacterial stability, even after immersion in water for 90 days, demonstrating clinical feasibility in topical applications.