Amphiphilic hyperbranched fluoropolymers as nanoscopic 19F magnetic resonance imaging agent assemblies

Self-assembling dendrimer nanosystems for specific fluorine magnetic resonance imaging and effective theranostic treatment of tumors

Fluorine magnetic resonance imaging (19F-MRI) is particularly promising for biomedical applications owing to the absence of fluorine in most biological systems. However, its use has been limited by the lack of safe and water-soluble imaging agents with high fluorine contents and suitable relaxation properties. We report innovative 19F-MRI agents based on supramolecular dendrimers self-assembled by an amphiphilic dendrimer composed of a hydrophobic alkyl chain and a hydrophilic dendron. Specifically, this amphiphilic dendrimer bears multiple negatively charged terminals with high fluorine content, which effectively prevented intra- and intermolecular aggregation of fluorinated entities via electrostatic repulsion. This permitted high fluorine nuclei mobility alongside good water solubility with favorable relaxation properties for use in 19F-MRI. Importantly, the self-assembling 19F-MRI agent was able to encapsulate the near-infrared fluorescence (NIRF) agent DiR and the anticancer drug paclitaxel for multimodal 19F-MRI and NIRF imaging of and theranostics for pancreatic cancer, a deadly disease for which there remains no adequate early detection method or efficacious treatment. The 19F-MRI and multimodal 19F-MRI and NIRF imaging studies on human pancreatic cancer xenografts in mice confirmed the capability of both imaging modalities to specifically image the tumors and demonstrated the efficacy of the theranostic agent in cancer treatment, largely outperforming the clinical anticancer drug paclitaxel. Consequently, these dendrimer nanosystems constitute promising 19F-MRI agents for effective cancer management. This study offers a broad avenue to the construction of 19F-MRI agents and theranostics, exploiting self-assembling supramolecular dendrimer chemistry.

Fluoropolymer Nanoparticles Synthesized via Reversible-Deactivation Radical Polymerizations and Their Applications

Fluorinated polymeric nanoparticles (FPNPs) combine unique properties of fluorocarbon and polymeric nanoparticles, which has stimulated massive interest for decades. However, fluoropolymers are not readily available from nature, resulting in synthetic developments to obtain FPNPs via free radical polymerizations. Recently, while increasing cutting-edge directions demand tailored FPNPs, such materials have been difficult to access via conventional approaches. Reversible-deactivation radical polymerizations (RDRPs) are powerful methods to afford well-defined polymers. Researchers have applied RDRPs to the fabrication of FPNPs, enabling the construction of particles with improved complexity in terms of structure, composition, morphology, and functionality. Related examples can be classified into three categories. First, well-defined fluoropolymers synthesized via RDRPs have been utilized as precursors to form FPNPs through self-folding and solution self-assembly. Second, thermally and photoinitiated RDRPs have been explored to realize in situ preparations of FPNPs with varied morphologies via polymerization-induced self-assembly and cross-linking copolymerization. Third, grafting from inorganic nanoparticles has been investigated based on RDRPs. Importantly, those advancements have promoted studies toward promising applications, including magnetic resonance imaging, biomedical delivery, energy storage, adsorption of perfluorinated alkyl substances, photosensitizers, and so on. This Review should present useful knowledge to researchers in polymer science and nanomaterials and inspire innovative ideas for the synthesis and applications of FPNPs.

Cardiovascular Molecular Imaging With Fluorine-19 MRI: The Road to the Clinic

Fluorine-19 (19F) magnetic resonance imaging is a unique quantitative molecular imaging modality that makes use of an injectable fluorine-containing tracer that generates the only visible 19F signal in the body. This hot spot imaging technique has recently been used to characterize a wide array of cardiovascular diseases and seen a broad range of technical improvements. Concurrently, its potential to be translated to the clinical setting is being explored. This review provides an overview of this emerging field and demonstrates its diagnostic potential, which shows promise for clinical translation. We will describe 19F magnetic resonance imaging hardware, pulse sequences, and tracers, followed by an overview of cardiovascular applications. Finally, the challenges on the road to clinical translation are discussed.

Synthesis of 5-Fluorouracil Polymer Conjugate and 19F NMR Analysis of Drug Release for MRI Monitoring

To monitor the release of fluorinated drugs from polymeric carriers, a novel 19F MRI enzyme-responsive contrast agent was developed and tested. This contrast agent was prepared by conjugation of 5-fluorouracil (5-FU) to hyperbranched poly(N,N-dimethylacrylamide) (HB-PDMA) via an enzyme-degradable peptide linker. Due to the different molecular sizes, the release of 5-FU from the 5-FU polymer conjugate resulted in a sufficiently substantial difference in spin-spin T2 19F NMR/MRI relaxation time that enabled differentiating between attached and released drug states. The 5-FU polymer conjugate exhibited a broad signal and short T2 relaxation time under 19F NMR analysis. Incubation with the enzyme induced the release of 5-FU, accompanied by an extension of T2 relaxation times and an enhancement in the 19F MRI signal. This approach is promising for application in the convenient monitoring of 5-FU drug release and can be used to monitor the release of other fluorinated drugs.

A Multifunctional Contrast Agent for 19F-Based Magnetic Resonance Imaging

Magnetic resonance imaging, MRI, relying on ¹⁹F nuclei has attracted much attention, because the isotopes exhibit a high gyromagnetic ratio (comparable to that of protons) and have 100% natural abundance. Furthermore, due to the very low traces of intrinsic fluorine in biological tissues, fluorine labeling allows easy visualization in vivo using ¹⁹F-based MRI. However, one of the drawbacks of the available fluorine tracers is their very limited solubility in water. Here, we detail the design and preparation of a set of water-compatible fluorine-rich polymers as contrast agents that can enhance the effectiveness of ¹⁹F-based MRI. The agents are synthesized using the nucleophilic addition reaction between poly(isobutylene-alt-maleic anhydride) copolymer and a mixture of amine-appended fluorine groups and polyethylene glycol (PEG) blocks. This allows control over the polymer architecture and stoichiometry, resulting in good affinity to water solutions. We further investigate the effects of introducing additional segmental mobility to the fluorine moieties in the polymer, by inserting a PEG linker between the moieties and the polymer backbone. We find that controlling the polymer stoichiometry and introducing additional segmental mobility enhance the NMR signals and narrow the peak profile. In particular, we assess the impact of the PEG linker on T₂* and T₁ relaxation times, using a series of gradient-recalled echo images with varying echo times, TE, or recovery time, TR, respectively. We find that for equivalent concentrations, the PEG linker greatly increases T₂*, while maintaining high T₁ values, as compared to polymers without this linker. Phantom images collected from these compounds show bright signals over a background with high intensities.

Exploiting the Fluxionality of Lanthanide Complexes in the Design of Paramagnetic Fluorine Probes

Fluorine-19 MRI is increasingly being considered as a tool for biomolecular imaging, but the very poor sensitivity of this technique has limited most applications. Previous studies have long established that increasing the sensitivity of ¹⁹F molecular probes requires increasing the number of fluorine nuclei per probe as well as decreasing their longitudinal relaxation time. The latter is easily achieved by positioning the fluorine atoms in close proximity to a paramagnetic metal ion such as a lanthanide(III). Increasing the number of fluorine atoms per molecule, however, is only useful inasmuch as all of the fluorine nuclei are chemically equivalent. Previous attempts to achieve this equivalency have focused on designing highly symmetric and rigid fluorinated macrocyclic ligands. A much simpler approach consists of exploiting highly fluxional lanthanide complexes with open coordination sites that have a high affinity for phosphated and phosphonated species. Computational studies indicate that Ln^III-TREN-MAM is highly fluxional, rapidly interconverting between at least six distinct isomers. In neutral water at room temperature, Ln^III-TREN-MAM binds two or three equivalents of fluorinated phosphonates. The close proximity of the ¹⁹F nuclei to the Ln^III center in the ternary complex decreases the relaxation times of the fluorine nuclei up to 40-fold. Advantageously, the fluorophosphonate-bound lanthanide complex is also highly fluxional such that all ¹⁹F nuclei are chemically equivalent and display a single ¹⁹F signal with a small LIS. Dynamic averaging of fluxional fluorinated supramolecular assemblies thus produces effective ¹⁹F MR systems.

19F-nanoparticles: Platform for in vivo delivery of fluorinated biomaterials for 19F-MRI

Fluorine-19 (¹⁹F) magnetic resonance imaging (MRI) features one of the most investigated and innovative techniques for quantitative and unambiguous cell tracking, providing information for both localization and number of cells. Because of the relative insensitivity of the MRI technique, a high number of magnetically equivalent fluorine atoms are required to gain detectable signals. However, an increased amount of ¹⁹F nuclei induces low solubility in aqueous solutions, making fluorine-based probes not suitable for in vivo imaging applications. In this context, nanoparticle-based platforms play a crucial role, since nanoparticles may carry a high payload of ¹⁹F-based contrast agents into the relevant cells or tissues, increase the imaging agents biocompatibility, and provide a highly versatile platform. In this review, we present an overview of the ¹⁹F-based nanoprobes for sensitive ¹⁹F-MRI, focusing on the main nanotechnologies employed to date, such as fluorine and theranostic nanovectors, including their design and applications.

Photoresponsive host-guest chemistry and relaxation time of fluorinated cyclodextrin and arylazopyrazole-functionalized DOTA metal complexes

Light-responsive modulation of the longitudinal (T1) and transversal relaxation times of a fluorinated cyclodextrin has been achieved by host-guest complexation with arylazopyrazole-modified metal complexes in aqueous solution. This supramolecular concept can potentially be applied to the development of contrast agents for 19F magnetic resonance imaging (MRI).

Solution self-assembly of fluorinated polymers, an overview

The incorporation of fluorinated moieties into a polymer can confer unique properties and often lead in solution to original morphologies endowed with rare properties.

Fluoropolymers in biomedical applications: state-of-the-art and future perspectives

Biomedical applications of fluoropolymers in gene delivery, protein delivery, drug delivery, ¹⁹F MRI, PDT, anti-fouling, anti-bacterial, cell culture, and tissue engineering.

Efficient temperature-feedback liposome for 19F MRI signal enhancement

A new non-encapsulated fluorinated liposome (TSL) was developed, which showed instantaneous temperature-induced 19F MR signal enhancement and excellent stability under reversible signal transition at different conditions.

In Vivo Tracking of Fluorinated Polypeptide Gene Carriers by Positron Emission Tomography Imaging

Fluorinated polymers have attracted increasing attention in gene delivery and cytosolic protein delivery in recent years. In vivo tracking of fluorinated polymers will be of great importance to evaluate their biodistribution, clearance, and safety. However, tracking of polymeric carriers without changing their chemical structures remains a huge challenge. Herein, we reported a series of fluorinated poly-l-(lysine) (F-PLL) with high gene transfection efficiency and excellent biodegradation. Radionuclide ¹⁸F was radiolabeled on F-PLL by halogen replacement without chemical modification. The radiolabeling of F-PLL offers positron emission tomography (PET) imaging for in vivo tracking of the polymers. The biodistribution of F-PLL and the DNA complexes revealed by micro-PET imaging illustrated the rapid clearance of fluorinated polymers from liver and intestine after intravenous administration. The results demonstrated that the polymer F-PLL will not be accumulated in the liver and spleen when administrated as a gene carrier. This work presents a new strategy for in vivo tracking fluorinated polymers via PET imaging.

Resistance to Long-Term Bacterial Biofilm Formation Based on Hydrolysis-Induced Zwitterion Material with Biodegradable and Self-Healing Properties

Long-term resistance of biomaterials to the bacterial biofilm formation without antibiotic or biocide is highly demanded for biomedical applications. In this work, a novel biodegradable biomaterial with excellent capability to prevent long-term bacterial biofilm formation is prepared by the following two steps. Ethylcarboxybetaine ester analogue methacrylate (ECBEMA), poly(ethylene glycol) monomethacrylate (PEGMA), and 3-methacryloxypropyletris(trimethylsiloxy)silane (TRIS) were copolymerized to obtain p(ECBEMA-PEGMA-TRIS) (PEPT). Then, PEPT was cross-linked by isocyanate-terminated polylactic acid (IPDI-PLA-IPDI) to obtain the final PEPTx-PLAy (x and y are the number-average molecular weights (M_n) of PEPT and PLA, respectively) with optimal mechanical strength and adjustable surface regeneration rate. Static contact angle measurement, protein adsorption measurement, and attenuated total reflectance infrared (ATR-IR) results show that the PEPT19800-PLA800 film surface can generate a zwitterionic layer to resist nonspecific protein adsorption after surface hydrolysis. Quartz crystal microbalance with dissipation (QCM-D) results indicates that the PEPT19800-PLA800 film can undergo gradual degradation of the surface layer at the lowest swelling rate. Particularly, this material can efficiently resist the bacterial biofilm formation of both Gram-positive bacteria and Gram-negative bacteria over 14 and 6 days, respectively. Moreover, the material also shows an ideal self-healing feature to adapt to harsh conditions. Thus, this nonfouling material shows great potential in biomedical applications and marine antifouling coatings without antibiotic or biocide.

Design of fluorinated hyperbranched polyether copolymers for 19F MRI nanotheranostics

¹⁹F MRI contrast agents and drug nanocarriers based on fluorinated hyperbranched polyether copolymers.

Recent Studies on Fluorinated Silica Nanometer-Sized Particles

Since initially being reported, fluorinated silica nanometer-sized particles (F-SiNPs) have gained much interest in the scientific community, due to their unique properties. These properties, include, low surface energies, increased mechanical strength, thermal robustness, and chemical resistance, and are a direct result of the incorporation of fluorine with a nanometer-sized silica network. This review aims to summarize the synthetic methods that have, and are still, being utilized to prepare these specialized materials. Following this, applications for F-SiNPs, with an emphasis on recent examples, will be presented in further detail.

19F MRI of Polymer Nanogels Aided by Improved Segmental Mobility of Embedded Fluorine Moieties

Using fluorinated probes for 19F MRI imaging is an emerging field with potential utility in cellular imaging and cell tracking in vivo, which complements conventional 1H MRI. An attractive feature of 19F-based imaging is that this is a bio-orthogonal nucleus and the naturally abundant isotope is NMR active. A significant hurdle however in the 19F MRI arises from the tendency of organic macromolecules, with multiple fluorocarbon substitutions, to aggregate in the aqueous phase. This aggregation results in significant loss of sensitivity, because the T2 relaxation times of these aggregated 19F species tend to be significantly lower. In this report, we have developed a strategy to covalently trap nanoscopic states with an optimal degree of 19F substitutions, followed by significant enhancement in T2 relaxation times through increased segmental mobility of the side chain substituents facilitated by the stimulus-responsive elements in the polymeric nanogel. In addition to NMR relaxation time based evaluations, the ability to obtain such signals are also evaluated in mouse models. The propensity of these nanoscale assemblies to encapsulate hydrophobic drug molecules and the availability of surfaces for convenient introduction of fluorescent labels suggest the potential of these nanoscale architectures for use in multimodal imaging and therapeutic applications.

Fluorine polymer probes for magnetic resonance imaging: quo vadis?

Over the last few years, the development and relevance of 19F magnetic resonance imaging (MRI) for use in clinical practice has emerged. MRI using fluorinated probes enables the achievement of a specific signal with high contrast in MRI images. However, to ensure sufficient sensitivity of 19F MRI, fluorine probes with a high content of chemically equivalent fluorine atoms are required. The majority of 19F MRI agents are perfluorocarbon emulsions, which have a broad range of applications in molecular imaging, although the content of fluorine atoms in these molecules is limited. In this review, we focus mainly on polymer probes that allow higher fluorine content and represent versatile platforms with properties tailorable to a plethora of biomedical in vivo applications. We discuss the chemical development, up to the first imaging applications, of these promising fluorine probes, including injectable polymers that form depots that are intended for possible use in cancer therapy.

Expanding the monomer scope of linear and branched vinyl polymerisations via copper-catalysed reversible-deactivation radical polymerisation of hydrophobic methacrylates using anhydrous alcohol solvents

The use of anhydrous alcohols for Cu-catalysed reversible-deactivation radical polymerisation of a wide range of hydrophobic methacrylates has been explored in detail.

Complex Polymeric Architectures Self-Assembling in Unimolecular Micelles: Preparation, Characterization and Drug Nanoencapsulation

Unimolecular polymeric micelles are a class of single-molecule amphiphilic core-shell polymeric architectures, where the hydrophobic core is well stabilized by the hydrophilic shell, avoiding intermolecular core-core interactions. Multi-arm copolymers with a dendritic core, as well as hyperbranched and comb-like polymers, can form unimolecular micelles easily. In this review, examples of polymers able to form detectable unimolecular micelles will be presented, summarizing the analytical techniques used to characterize the unimolecular micelles and discriminate them from other supramolecular aggregates, such as multi-micelle aggregates. Unimolecular micelles are suitable for the nanoencapsulation of guest molecules. Compared to traditional supramolecular micelles, unimolecular micelles do not disassemble under dilution and are stable to environmental modifications. Recent examples of their application as drug delivery systems, endowed with increased stability and transport properties, will be discussed.

High F-Content Perfluoropolyether-Based Nanoparticles for Targeted Detection of Breast Cancer by 19F Magnetic Resonance and Optical Imaging

Two important challenges in the field of ¹⁹F magnetic resonance imaging (MRI) are the maintenance of high fluorine content without compromising imaging performance, and effective targeting of small particles to diseased tissue. To address these challenges, we have developed a series of perfluoropolyether (PFPE)-based hyperbranched (HBPFPE) nanoparticles with attached peptide aptamer as targeting ligands for specific in vivo detection of breast cancer with high ¹⁹F MRI sensitivity. A detailed comparison of the HBPFPE nanoparticles (NPs) with the previously reported trifluoroethyl acrylate (TFEA)-based polymers demonstrates that the mobility of fluorinated segments of the HBPFPE nanoparticles is significantly enhanced (¹⁹F T₂ > 80 ms vs 31 ms), resulting in superior MR imaging sensitivity. Selective targeting was confirmed by auto- and pair correlation analysis of fluorescence microscopy data, in vitro immunofluorescence, in vivo ¹⁹F MRI, ex vivo fluorescence and ¹⁹F NMR. The results highlight the high efficiency of aptamers for targeting and the excellent sensitivity of the PFPE moieties for ¹⁹F MRI. Of relevance to in vivo applications, the PFPE-based polymers exhibit much faster clearance from the body than the previously introduced perfluorocarbon emulsions ( t_1/2 ∼ 20 h vs up to months). Moreover, the aptamer-conjugated NPs show significantly higher tumor-penetration, demonstrating the potential of these imaging agents for therapeutic applications. This report of the synthesis of polymeric aptamer-conjugated PFPE-based ¹⁹F MRI CAs with high fluorine content (∼10 wt %) demonstrates that these NPs are exciting candidates for detecting diseases with high imaging sensitivity.

Fluorinated Paramagnetic Complexes: Sensitive and Responsive Probes for Magnetic Resonance Spectroscopy and Imaging

Fluorine magnetic resonance spectroscopy (MRS) and magnetic resonance imaging (MRI) of chemical and physiological processes is becoming more widespread. The strength of this technique comes from the negligible background signal in in vivo¹⁹F MRI and the large chemical shift window of ¹⁹F that enables it to image concomitantly more than one marker. These same advantages have also been successfully exploited in the design of responsive ¹⁹F probes. Part of the recent growth of this technique can be attributed to novel designs of ¹⁹F probes with improved imaging parameters due to the incorporation of paramagnetic metal ions. In this review, we provide a description of the theories and strategies that have been employed successfully to improve the sensitivity of ¹⁹F probes with paramagnetic metal ions. The Bloch-Wangsness-Redfield theory accurately predicts how molecular parameters such as internuclear distance, geometry, rotational correlation times, as well as the nature, oxidation state, and spin state of the metal ion affect the sensitivity of the fluorine-based probes. The principles governing the design of responsive ¹⁹F probes are subsequently described in a "how to" guide format. Examples of such probes and their advantages and disadvantages are highlighted through a synopsis of the literature.

The fluorination effect of fluoroamphiphiles in cytosolic protein delivery

Direct delivery of proteins into cells avoids many drawbacks of gene delivery, and thus has emerging applications in biotherapy. However, it remains a challenging task owing to limited charges and relatively large size of proteins. Here, we report an efficient protein delivery system via the co-assembly of fluoroamphiphiles and proteins into nanoparticles. Fluorous substituents on the amphiphiles play essential roles in the formation of uniform nanoparticles, avoiding protein denaturation, efficient endocytosis, and maintaining low cytotoxicity. Structure-activity relationship studies reveal that longer fluorous chain length and higher fluorination degree contribute to more efficient protein delivery, but excess fluorophilicity on the polymer leads to the pre-assembly of fluoroamphiphiles into stable vesicles, and thus failed protein encapsulation and cytosolic delivery. This study highlights the advantage of fluoroamphiphiles over other existing strategies for intracellular protein delivery.

Proteins can serve as means of medical treatment, but their efficient delivery to cells is difficult. Here, the authors present a type of polymers, fluoroamphiphiles, acting as chemical chaperones that can facilitate the import of proteins into the inner compartment, i.e. cytosol, of cells.

Effects of Surface Charge of Hyperbranched Polymers on Cytotoxicity, Dynamic Cellular Uptake and Localization, Hemotoxicity, and Pharmacokinetics in Mice

Nanoscaled polymeric materials are increasingly being investigated as pharmaceutical products, drug/gene delivery vectors, or health-monitoring devices. Surface charge is one of the dominant parameters that regulates nanomaterial behavior in vivo. In this paper, we demonstrated how control over chemical synthesis allowed manipulation of nanoparticle surface charge, which in turn greatly influenced the in vivo behavior. Three methacrylate/methacrylamide-based monomers were used to synthesize well-defined hyperbranched polymers (HBP) by reversible addition-fragmentation chain transfer (RAFT) polymerization. Each HBP had a hydrodynamic diameter of approximately 5 nm as determined by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Incorporation of a fluorescent moiety within the polymeric nanoparticles allowed determination of how charge affected the in vivo pharmacokinetic behavior of the nanomaterials and the biological response to them. A direct correlation between surface charge, cellular uptake, and cytotoxicity was observed, with cationic HBPs exhibiting higher cellular uptake and cytotoxicity than their neutral and anionic counterparts. Evaluation of the distribution of the differently charged HBPs within macrophages showed that all HBPs accumulated in the cytoplasm, but cationic HBPs also trafficked to, and accumulated within, the nucleus. Although cationic HBPs caused slight hemolysis, this was generally below accepted levels for in vivo safety. Analysis of pharmacokinetic behavior showed that cationic and anionic HBPs had short blood half-lives of 1.82 ± 0.51 and 2.34 ± 0.93 h respectively, compared with 5.99 ± 2.30 h for neutral HBPs. This was attributed to the fact that positively charged surfaces are more readily covered with opsonin proteins and thus more visible to phagocytic cells. This was supported by in vitro flow cytometric and qualitative live cell imaging studies, which showed that cationic HBPs tended to be taken up by macrophages more effectively and rapidly than neutral and anionic particles.

Base-catalyzed diastereoselective trimerization of trifluoroacetone

Amphiphilic fluorocarbons have unique properties that facilitate their self assembly and adhesion to both inorganic and biological substrates. Incorporation of these moieties into valuable constructs typically require complex synthetic routes that have limited their use. Here, the base-catalyzed diastereoselective synthesis of 6-methyl-2,4,6-tris(trifluoromethyl)tetrahydro-2H-pyran-2,4-diol is reported. Trimerization of trifluoroacetone in the presence of 5 mol% KHMDS delivers one of four diastereomers selectively in 81% yield with no column chromatography. Temperature screening revealed the reversibility of this trimerization and the funneling of material into the most thermodynamically stable oxane. Subsequent functionalization with boronic acids is reported.

Perfluoro-tert-butyl Homoserine Is a Helix-Promoting, Highly Fluorinated, NMR-Sensitive Aliphatic Amino Acid: Detection of the Estrogen Receptor·Coactivator Protein-Protein Interaction by 19F NMR

Highly fluorinated amino acids can stabilize proteins and complexes with proteins, via enhanced hydrophobicity, and provide novel methods for identification of specific molecular events in complex solutions, via selective detection by 19F NMR and the absence of native 19F signals in biological contexts. However, the potential applications of 19F NMR in probing biological processes are limited both by the strong propensities of most highly fluorinated amino acids for the extended conformation and by the relatively modest sensitivity of NMR spectroscopy, which typically constrains measurements to mid-micromolar concentrations. Herein, we demonstrate that perfluoro-tert-butyl homoserine exhibits a propensity for compact conformations, including α-helix and polyproline helix (PPII), that is similar to that of methionine. Perfluoro-tert-butyl homoserine has nine equivalent fluorines that do not couple to any other nuclei, resulting in a sharp singlet that can be sensitively detected rapidly at low micromolar concentrations. Perfluoro-tert-butyl homoserine was incorporated at sites of leucine residues within the α-helical LXXLL short linear motif of estrogen receptor (ER) coactivator peptides. A peptide containing perfluoro-tert-butyl homoserine at position i + 3 of the ER coactivator LXXLL motif exhibited a Kd of 2.2 μM for the estradiol-bound estrogen receptor, similar to that of the native ligand. 19F NMR spectroscopy demonstrated the sensitive detection (5 μM concentration, 128 scans) of binding of the peptide to the ER and of inhibition of protein-protein interaction by the native ligand or by the ER antagonist tamoxifen. These results suggest diverse potential applications of perfluoro-tert-butyl homoserine in probing protein function and protein-protein interfaces in complex solutions.

Fe- and Ln-DOTAm-F12 Are Effective Paramagnetic Fluorine Contrast Agents for MRI in Water and Blood

A series of fluorinated macrocyclic complexes, M-DOTAm-F12, where M is La^III, Eu^III, Gd^III, Tb^III, Dy^III, Ho^III, Er^III, Tm^III, Yb^III, and Fe^II, was synthesized, and their potential as fluorine magnetic resonance imaging (MRI) contrast agents was evaluated. The high water solubility of these complexes and the presence of a single fluorine NMR signal, two necessary parameters for in vivo MRI, are substantial advantages over currently used organic polyfluorocarbons and other reported paramagnetic ¹⁹F probes. Importantly, the sensitivity of the paramagnetic probes on a per fluorine basis is at least 1 order of magnitude higher than that of diamagnetic organic probes. This increased sensitivity is due to a substantial-up to 100-fold-decrease in the longitudinal relaxation time (T₁) of the fluorine nuclei. The shorter T₁ allows for a greater number of scans to be obtained in an equivalent time frame. The sensitivity of the fluorine probes is proportional to the T₂/T₁ ratio. In water, the optimal metal complexes for imaging applications are those containing Ho^III and Fe^II, and to a lesser extent Tm^III and Yb^III. Whereas T₁ of the lanthanide complexes are little affected by blood, the T₂ are notably shorter in blood than in water. The sensitivity of Ln-DOTAm-F12 complexes is lower in blood than in water, such that the most sensitive complex in water, Ho^III-DOTAm-F12, could not be detected in blood. Tm^III yielded the most sensitive lanthanide fluorine probe in blood. Notably, the relaxation times of the fluorine nuclei of Fe^II-DOTAm-F12 are similar in water and in blood. That complex has the highest T₂/T₁ ratio (0.57) and the lowest limit of detection (300 μM) in blood. The combination of high water solubility, single fluorine signal, and high T₂/T₁ of M-DOTAm-F12 facilitates the acquisition of three-dimensional magnetic resonance images.

Polymeric 19F MRI agents responsive to reactive oxygen species

Medical imaging agents that can report on the biological state are attracting increasing interest.

Tunable dynamic fluorinated poly(orthoester)-based drug carriers for greatly enhanced chemotherapeutic efficacy

Tunable dynamic fluorinated poly(orthoester)-based drug carriers were evaluatedin vitroandin vivoand showed greatly enhanced chemotherapeutic efficacy.

Self-Sorting and Coassembly of Fluorinated, Hydrogenated, and Hybrid Janus Dendrimers into Dendrimersomes

The modular synthesis of a library containing seven self-assembling amphiphilic Janus dendrimers is reported. Three of these molecules contain environmentally friendly chiral-racemic fluorinated dendrons in their hydrophobic part (RF), one contains achiral hydrogenated dendrons (RH), while one denoted hybrid Janus dendrimer, contains a combination of chiral-racemic fluorinated and achiral hydrogenated dendrons (RHF) in its hydrophobic part. Two Janus dendrimers contain either chiral-racemic fluorinated dendrons and a green fluorescent dye conjugated to its hydrophilic part (RF-NBD) or achiral hydrogenated and a red fluorescent dye in its hydrophilic part (RH-RhB). These RF, RH, and RHF Janus dendrimers self-assembled into unilamellar or onion-like soft vesicular dendrimersomes (DSs), with similar thicknesses to biological membranes by simple injection from ethanol solution into water or buffer. Since RF and RH dendrons are not miscible, RF-NBD and RH-RhB were employed to investigate by fluorescence microscopy the self-sorting and coassembly of RF and RH as well as of phospholipids into hybrid DSs mediated by the hybrid hydrogenated-fluorinated RHF Janus dendrimer. The hybrid RHF Janus dendrimer coassembled with both RF and RH. Three-component hybrid DSs containing RH, RF, and RHF were formed when the proportion of RHF was higher than 40%. With low concentration of RHF and in its absence, RH and RF self-sorted into individual RH or RF DSs. Phospholipids were also coassembled with hybrid RHF Janus dendrimers. The simple synthesis and self-assembly of DSs and hybrid DSs, their similar thickness with biological membranes and their imaging by fluorescence and (19)F-MRI make them important tools for synthetic biology.

A General and Facile Strategy to Fabricate Multifunctional Nanoprobes for Simultaneous (19)F Magnetic Resonance Imaging, Optical/Thermal Imaging, and Photothermal Therapy

(19)F magnetic resonance imaging (MRI), due to its high sensitivity and negligible background, is anticipated to be a powerful noninvasive, sensitive, and accurate molecular imaging technique. However, the major challenge of (19)F MRI is to increase the number of (19)F atoms while maintaining the solubility and molecular mobility of the probe. Here, we successfully developed a facile and general strategy to synthesize the multifunctional (19)F MRI nanoprobes by encapsulating the hydrophobic inorganic nanoparticles (NPs) into a hybrid polymer micelle consisting of hydrolysates of 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PDTES) and oleylamine-functionalized poly(succinimide) (PSIOAm). Due to their good water dispersibility, excellent molecular mobility resulting from the ultrathin coating, and high (19)F atom numbers, these nanoprobes generate a separate sharp singlet of (19)F nuclear magnetic resonance (NMR) signal (at -82.8 ppm) with half peak width of ∼28 Hz, which is highly applicable for (19)F MRI. Significantly, by varying the inorganic core from metals (Au), oxides (Fe3O4), fluorides (NaYF4:Yb(3+)/Er(3+)), and phosphates (YPO4) to semiconductors (Cu7S4 and Ag2S, ZnS:Mn(2+)) NPs, which renders the nanoprobes' multifunctional properties such as photothermal ability (Au, Cu7S4), magnetism (Fe3O4), fluorescence (ZnS:Mn(2+)), near-infrared (NIR) fluorescence (Ag2S), and upconversion (UC) luminescence. Meanwhile, the as-prepared nanoprobes possess relatively small sizes (about 50 nm), which is beneficial for long-time circulation. The proof-of-concept in vitro (19)F NMR and photothermal ablation of ZnS:Mn(2+)@PDTES/PSIOAm and Cu7S4@PDTES/PSIOAm nanoprobes further suggest that these nanoprobes hold wide potentials for multifunctional applications in biomedical fields.

Water soluble poly(styrene sulfonate)-b-poly(vinylidene fluoride)-b-poly(styrene sulfonate) triblock copolymer nanoparticles

Water-soluble PNaSS-b-PVDF-b-PNaSS triblock copolymer.

Multifunctional hyperbranched polymers for CT/19F MRI bimodal molecular imaging

Multifunctional hyperbranched polymers containing iodine and fluorine were synthesised by reversible addition–fragmentation chain transfer (RAFT) polymerisation, and evaluated as novel contrast agents for CT/¹⁹F MRI bimodal molecular imaging.

Hyperbranched Self-Immolative Polymers (hSIPs) for Programmed Payload Delivery and Ultrasensitive Detection

Upon stimuli-triggered single cleavage of capping moieties at the focal point and chain terminal, self-immolative dendrimers (SIDs) and linear self-immolative polymers (l-SIPs) undergo spontaneous domino-like radial fragmentation and cascade head-to-tail depolymerization, respectively. The nature of response selectivity and signal amplification has rendered them a unique type of stimuli-responsive materials. Moreover, novel design principles are required for further advancement in the field of self-immolative polymers (SIPs). Herein, we report the facile fabrication of water-dispersible SIPs with a new chain topology, hyperbranched self-immolative polymers (hSIPs), by utilizing one-pot AB2 polycondensation methodology and sequential postfunctionalization. The modular engineering of three categories of branching scaffolds, three types of stimuli-cleavable capping moieties at the focal point, and seven different types of peripheral functional groups and polymeric building blocks affords both structurally and functionally diverse hSIPs with chemically tunable amplified-release features. On the basis of the hSIP platform, we explored myriad functions including visible light-triggered intracellular release of peripheral conjugated drugs in a targeted and spatiotemporally controlled fashion, intracellular delivery and cytoplasmic reductive milieu-triggered plasmid DNA release via on/off multivalency switching, mitochondria-targeted fluorescent sensing of H2O2 with a detection limit down to ∼20 nM, and colorimetric H2O2 assay via triggered dispersion of gold nanoparticle aggregates. To further demonstrate the potency and generality of the hSIP platform, we further configure it into biosensor design for the ultrasensitive detection of pathologically relevant antigens (e.g., human carcinoembryonic antigen) by integrating with enzyme-mediated cycle amplification with positive feedback and enzyme-linked immunosorbent assay (ELISA).

Disulfide-Functionalized Unimolecular Micelles as Selective Redox-Responsive Nanocarriers

Redox-sensitive hyperbranched dendritic-linear polymers (HBDLPs) were prepared and stabilized individually as unimolecular micelles with diameters in the range 25-40 nm. The high molecular weight (500-950 kDa), core-shell amphiphilic structures were synthesized through a combination of self-condensing vinyl copolymerization (SCVCP) and atom transfer radical polymerization (ATRP). Cleavable disulfide bonds were introduced, either in the backbone, or in pendant groups, of the hyperbranched core of the HBDLPs. By triggered reductive degradation, the HBDLPs showed up to a 7-fold decrease in molecular weight, and the extent of degradation was tuned by the amount of incorporated disulfides. The HBDLP with pendant disulfide-linked functionalities in the hyperbranched core was readily postfunctionalized with a hydrophobic dye, as a mimic for a drug. An instant release of the dye was observed as a response to a reductive environment similar to the one present intracellularly. The proposed strategy shows a facile route to highly stable unimolecular micelles, which attractively exhibit redox-responsive degradation and cargo release properties.