Recovery in viscid line fibers

Influence of experimental methods on the mechanical properties of silk fibers: A systematic literature review and future road map

Spider silk fibers are of scientific and industrial interest because of their extraordinary mechanical properties. These properties are normally determined by tensile tests, but the values obtained are dependent on the morphology of the fibers, the test conditions, and the methods by which stress and strain are calculated. Because of this, results from many studies are not directly comparable, which has led to widespread misconceptions in the field. Here, we critically review most of the reports from the past 50 years on spider silk mechanical performance and use artificial spider silk and native silks as models to highlight the effect that different experimental setups have on the fibers' mechanical properties. The results clearly illustrate the importance of carefully evaluating the tensile test methods when comparing the results from different studies. Finally, we suggest a protocol for how to perform tensile tests on silk and biobased fibers.

Adhesive contact and protein elastic modulus tune orb weaving spider glue droplet biomechanics to habitat humidity

Tiny glue droplets along the viscous capture threads of spider orb webs prevent insects from escaping. Each droplet is formed of a protein core surrounded by a hygroscopic aqueous layer, which cause the droplet's adhesion to change with humidity. As an insect struggles to escape the web, a thread's viscoelastic core proteins extend, transferring adhesive forces to the thread's support fibers. Maximum adhesive force is achieved when absorbed atmospheric moisture allows a flattened droplet to establish sufficient adhesive contact while maintaining the core protein cohesion necessary for force transfer. We examined the relationship between these droplet properties and adhesive force and the work of extending droplets at five relative humidities in twelve species that occupy habitats which have different humidities. A regression analysis that included both flattened droplet area and core protein elastic modulus described droplet adhesion, but the model was degraded when core protein area was substituted for droplet. Species from low humidity habitats expressed greater adhesion at lower humidities, whereas species from high humidity habitats expressed greater adhesion at high humidities. Our results suggest a general model of droplet adhesion with two adhesion peaks, one for low humidity species, which occurs when increasing droplet area and decreasing protein cohesion intersect, and another for high humidity species, which occurs when area and cohesion have diverged maximally. These dual peaks in adhesive force explain why some species from intermediate and high humidity habitats express high adhesion at several humidities. STATEMENT OF SIGNIFICANCE: We characterized the effect of humidity on the adhesion of twelve orb weaving spider species' glue droplets and showed how humidity-mediated changes in the contact area of a droplet's outer, hygroscopic aqueous layer and the stiffness of its protein core affect droplet performance. This revealed how droplet adhesion has been tuned to the humidity of a species' habitat and allowed us to revise a model that describes the environmental determinants of droplet biomechanics.

Expression of spidroin proteins in the silk glands of golden orb-weaver spiders

The expression of spidroins in the major ampullate, minor ampullate, flagelliform, and tubuliform silk glands of Trichonephila clavipes spiders was analyzed using proteomics analysis techniques. Spidroin peptides were identified and assigned to different gene products based on sequence concurrence when compared with the whole genome of the spider. It was found that only a relatively low proportion of the spidroin genes are expressed as proteins in any of the studied glands. In addition, the expression of spidroin genes in different glands presents a wide range of patterns, with some spidroins being found in a single gland exclusively, while others appear in the content of several glands. The combination of precise genomics, proteomics, microstructural, and mechanical data provides new insights both on the design principles of these materials and how these principles might be translated for the production of high-performance bioinspired artificial fibers.

Humidity mediated performance and material properties of orb weaving spider adhesive droplets

Capture thread glue droplets retain insects that strike an orb web and are key to the success of over 4,600 described spider species. Each droplet is a self-assembling adhesive system whose emergent biomechanical properties are centered on its viscoelastic, protein core. This bioadhesive is dependent on its surrounding hygroscopic aqueous layer for hydration and chemical conditioning. Consequently, a droplet's water content and adhesive performance track environmental humidity. We tested the hypothesis that natural selection has tuned a droplet's adhesive performance and material properties to a species' foraging humidity. At 55% relative humidity (RH) the adhesive properties of 12 species ranged from that of PEG-based hydrogels to that of silicone rubber, exhibiting a 1088-fold inter-specific difference in stiffness (0.02-21.76 MPa) and a 147-fold difference in toughness (0.14-20.51 MJ/m³). When tested over a 70% RH range, droplet extension lengths per protein core volume peaked at lower humidities in species from exposed, low humidity habitats, and at higher humidities in nocturnal species and those found in humid habitats. However, at the RH's where these species' maximum extension per protein volume indices were observed, the stiffness of most species' adhesive did not differ, documenting that selection has tuned elastic modulus by adjusting droplet hygroscopicity. This inverse relationship between droplet hygroscopicity and a species' foraging humidity ensures optimal adhesive stiffness. By characterizing the humidity responsiveness and properties of orb spider glue droplets, our study also profiles the range of its biomimetic potential. STATEMENT OF SIGNIFICANCE: Over 4,600 described species of orb weaving spider rely on tiny glue droplets in their webs to retain insect that the web intercepts. The aqueous layer that covers each droplet's core allows this adhesive to remain pliable and to stretch as an insect struggles to escape. The aqueous solution also attracts water from the air, causing the glue droplet's performance to change with humidity. By characterizing the droplet extensions and adhesive material properties of twelve species at relative humidities between of 20 and 90%, this study examined how this unique adhesive system responds to its environment and how it is tuned to the humidity of a species' habitat.

Basic Principles in the Design of Spider Silk Fibers

The prominence of spider silk as a hallmark in biomimetics relies not only on its unrivalled mechanical properties, but also on how these properties are the result of a set of original design principles. In this sense, the study of spider silk summarizes most of the main topics relevant to the field and, consequently, offers a nice example on how these topics could be considered in other biomimetic systems. This review is intended to present a selection of some of the essential design principles that underlie the singular microstructure of major ampullate gland silk, as well as to show how the interplay between them leads to the outstanding tensile behavior of spider silk. Following this rationale, the mechanical behavior of the material is analyzed in detail and connected with its main microstructural features, specifically with those derived from the semicrystalline organization of the fibers. Establishing the relationship between mechanical properties and microstructure in spider silk not only offers a vivid image of the paths explored by nature in the search for high performance materials, but is also a valuable guide for the development of new artificial fibers inspired in their natural counterparts.

Molecular Dynamics of Synthetic Flagelliform Silk Fiber Assembly

In order to better understand the relationship between Flagelliform (Flag) spider silk molecular structural organization and the mechanisms of fiber assembly, it was designed and produced the Nephilengys cruentata Flag spidroin analogue rNcFlag2222. The recombinant proteins are composed by the elastic repetitive glycine-rich motifs (GPGGX/GGX) and the spacer region, rich in hydrophilic charged amino acids, present at the native silk spidroin. Using different approaches for nanomolecular protein analysis, the structural data of rNcFlag2222 recombinant proteins were compared in its fibrillar and in its fully solvated states. Based on the results was possible to identify the molecular structural dynamics of NcFlag2222 prior to and after fiber formation. Overal rNcFlag2222 shows a mixture of semiflexible and rigid conformations, characterized mostly by the presence of PPII, β-turn and β-sheet. These results agree with previous studies and bring insights about the molecular mechanisms that might driven Flag silk fibers assembly and elastomeric behavior.

Spider silk proteome provides insight into the structural characterization of Nephila clavipes flagelliform spidroin

The capture spiral of web from N. clavipes spider consists of a single type of spidroin - the flagelliform silk protein, a natural material representing a combination of strength and high elasticity. Flagelliform spider silk is the most extensible silk fibre produced by orb weaver spiders and the structure of this remarkable material is still largely unknown. In the present study we used a proteomic approach to elucidate the complete sequence and the post-translational modifications of flagelliform silk proteins. The long sequence of flagelliform silk protein presents 45 hydroxylated proline residues, which may contribute to explain the mechanoelastic property of these fibres, since they are located in the GPGGX motif. The 3D-structure of the protein was modelled considering the three domains together, i.e., the N- and C-terminal non-repetitive domains, and the central repetitive domain. In the resulting molecular model there is a predominance of random structures in the solid fibres of the silk protein. The N-terminal domain is composed of three α-helices and the C-terminal domain is composed of one small helical section. Proteomic data reported herein may be relevant for the development of novel approaches for the synthetic or recombinant production of novel silk-based spider polymers.

Fitness consequences of plasticity in an extended phenotype

Like regular phenotypes, extended phenotypes have demonstrable fitness advantages and their properties may vary plastically across environments. However, the fitness advantages of plasticity are only known for a select few extended phenotypes. It is known that the form and functions of spider orb webs can be manipulated by laboratory experiments. For instance, the physical and chemical properties of the spiral and gluey silks vary in property as protein intake varies. Orb web spiders thus represent good models for extended phenotypic plasticity studies. We performed experiments manipulating the protein intake of two vertically aligned orb web building spiders to determine whether variations in the chemical and physical properties of their spiral and gluey silk affect prey retention in their webs. We found in both spider species that individuals deprived of protein had a greater gluey silk glycoprotein core volume, and this correlated strongly with spiral thread stickiness and increased prey retention by the webs. Moreover, we found strong positive correlations between glue droplet volume and glycoprotein core volume for spiders in the protein-deprived treatment, but weaker correlations for protein-fed spiders. We interpreted these findings as the spiders investing more in glycoprotein when nutrient deprived. We attribute the associated increase in prey retention capacity as a fitness consequence of plasticity in the spiral properties.

Diet-induced covariation between architectural and physicochemical plasticity in an extended phenotype

The adaptive benefits of extended phenotypic plasticity are imprecisely defined due to a paucity of experiments examining traits that are manipulable and measurable across environments. Spider webs are often used as models to explore the adaptive benefits of variations in extended phenotypes across environments. Nonetheless, our understanding of the adaptive nature of the plastic responses of spider webs is impeded when web architectures and silk physicochemical properties appear to co-vary. An opportunity to examine this co-variation is presented by modifying prey items while measuring web architectures and silk physiochemical properties. Here we performed two experiments to assess the nature of the association between web architectures and gluey silk properties when the orb web spider Argiope keyserlingi was fed a diet that varied in either mass and energy or prey size and feeding frequency. We found web architectures and gluey silk physicochemical properties to co-vary across treatments in both experiments. Specifically, web capture area co-varied with gluey droplet morphometrics, thread stickiness and salt concentrations when prey mass and energy were manipulated, and spiral spacing co-varied with gluey silk salt concentrations when prey size and feeding frequency were manipulated. We explained our results as A. keyserlingi plastically shifting its foraging strategy as multiple prey parameters simultaneously varied. We confirmed and extended previous work by showing that spiders use a variety of prey cues to concurrently adjust web and silk traits across different feeding regimes.

Nutrient deprivation induces property variations in spider gluey silk

Understanding the mechanisms facilitating property variability in biological adhesives may promote biomimetic innovations. Spider gluey silks such as the spiral threads in orb webs and the gumfoot threads in cobwebs, both of which comprise of an axial thread coated by glue, are biological adhesives that have variable physical and chemical properties. Studies show that the physical and chemical properties of orb web gluey threads change when spiders are deprived of food. It is, however, unknown whether gumfoot threads undergo similar property variations when under nutritional stress. Here we tested whether protein deprivation induces similar variations in spiral and gumfoot thread morphology and stickiness. We manipulated protein intake for the orb web spider Nephila clavipes and the cobweb spider Latrodectus hesperus and measured the diameter, glue droplet volume, number of droplets per mm, axial thread width, thread stickiness and adhesive energy of their gluey silks. We found that the gluey silks of both species were stickier when the spiders were deprived of protein than when the spiders were fed protein. In N. clavipes a concomitant increase in glue droplet volume was found. Load-extension curves showed that protein deprivation induced glue property variations independent of the axial thread extensions in both species. We predicted that changes in salt composition of the glues were primarily responsible for the changes in stickiness of the silks, although changes in axial thread properties might also contribute. We, additionally, showed that N. clavipes' glue changes color under protein deprivation, probably as a consequence of changes to its biochemical composition.

Identification and dynamics of polyglycine II nanocrystals in Argiope trifasciata flagelliform silk

Spider silks combine a significant number of desirable characteristics in one material, including large tensile strength and strain at breaking, biocompatibility, and the possibility of tailoring their properties. Major ampullate gland silk (MAS) is the most studied silk and their properties are explained by a double lattice of hydrogen bonds and elastomeric protein chains linked to polyalanine β-nanocrystals. However, many basic details regarding the relationship between composition, microstructure and properties in silks are still lacking. Here we show that this relationship can be traced in flagelliform silk (Flag) spun by Argiope trifasciata spiders after identifying a phase consisting of polyglycine II nanocrystals. The presence of this phase is consistent with the dominant presence of the -GGX- and -GPG- motifs in its sequence. In contrast to the passive role assigned to polyalanine nanocrystals in MAS, polyglycine II nanocrystals can undergo growing/collapse processes that contribute to increase toughness and justify the ability of Flag to supercontract.

The variability and interdependence of spider viscid line tensile properties

True stress-true strain curves of naturally spun viscid line fibres retrieved directly from the spiral of orb-webs built by Argiope trifasciata spiders were measured using a novel methodology. This new procedure combines a method for removing the aqueous coating of the fibres and a technique that allows the accurate measurement of their cross-sectional area. Comparison of the tensile behaviour of different samples indicated that naturally spun viscid lines show a large variability, comparable to that of other silks, such as major ampullate gland silk and silkworm silk. Nevertheless, application of a statistical analysis allowed the identification of two independent parameters that underlie the variability and characterize the observed range of true stress-true strain curves. The combination of this result with previous mechanical and microstructural data suggested the assignment of these two independent effects to the degree of alignment of the protein chains and to the local relative humidity, which, in turn, depends on the composition of the viscous coating and on the external environmental conditions.

Wind induces variations in spider web geometry and sticky spiral droplet volume

Trap building by animals is rare because it comes at substantial costs. Using materials with properties that vary across environments maintains trap functionality. The sticky spiral silks of spider orb webs are used to catch flying prey. Web geometry, accompanied by compensatory changes in silk properties, may change across environments to sustain web functionality. We exposed the spider Cyclosa mulmeinensis to wind to test if wind-induced changes in web geometry are accompanied by changes in aggregate silk droplet morphology, axial thread width or spiral stickiness. We compared: (i) web catching area, (ii) length of total silks, (iii) mesh height, (iv) number of radii, (v) aggregate droplet morphology and (vi) spiral thread stickiness, between webs made by spiders exposed to wind with those not exposed to wind. We interpreted co-variation in droplet morphology or spiral stickiness with web capture area, mesh height or spiral length as the silk properties functionally compensating for changes in web geometry to reduce wind drag. Wind-exposed C. mulmeinensis built webs with smaller capture areas, shorter capture spiral lengths, and more widely spaced capture spirals, resulting in the expenditure of less silk. Individuals that were exposed to wind also deposited larger droplets of sticky silk but the stickiness of the spiral threads remained unchanged. The larger droplets may be a product of greater investment in water, or low molecular weight compounds facilitating atmospheric water uptake. Either way droplet dehydration in wind is likely to be minimized.

Wet webs work better: Humidity, supercontraction and the performance of spider orb webs

Like many biomaterials, spider silk responds to water through softening and swelling. Major ampullate silk, the main structural element of most prey capture webs, also shrinks dramatically if unrestrained or develops high tension if restrained, a phenomenon called "supercontraction". While supercontraction has been investigated for over 30 years, its consequences for web performance remain controversial. Here, we measure prey capture performance of dry and wet (supercontracted) orb webs of Argiope and Nephila using small wood blocks as prey. Prey capture performance significantly increased at high humidity for Argiope while the improvement was less dramatic for Nephila. This difference is likely due to Argiope silk supercontracting more than Nephila silk. Web deflection, measured as the extension of the web upon prey impact, also increased at high humidity in Argiope, suggesting that silk softening upon supercontraction explains improved performance of wet webs. These results strongly argue that supercontraction is not detrimental to web performance.

Post-secretion processing influences spider silk performance

Phenotypic variation facilitates adaptations to novel environments. Silk is an example of a highly variable biomaterial. The two-spidroin (MaSp) model suggests that spider major ampullate (MA) silk is composed of two proteins-MaSp1 predominately contains alanine and glycine and forms strength enhancing β-sheet crystals, while MaSp2 contains proline and forms elastic spirals. Nonetheless, mechanical properties can vary in spider silks without congruent amino acid compositional changes. We predicted that post-secretion processing causes variation in the mechanical performance of wild MA silk independent of protein composition or spinning speed across 10 species of spider. We used supercontraction to remove post-secretion effects and compared the mechanics of silk in this 'ground state' with wild native silks. Native silk mechanics varied less among species compared with 'ground state' silks. Variability in the mechanics of 'ground state' silks was associated with proline composition. However, variability in native silks did not. We attribute interspecific similarities in the mechanical properties of native silks, regardless of amino acid compositions, to glandular processes altering molecular alignment of the proteins prior to extrusion. Such post-secretion processing may enable MA silk to maintain functionality across environments, facilitating its function as a component of an insect-catching web.

Humidity affects the extensibility of an orb-weaving spider's viscous thread droplets

The prey-capture threads found in most spider orb webs rely on viscous droplets for their stickiness. Each droplet is formed of a central mass of viscoelastic glycoprotein glue surrounded by an aqueous covering, both of which incorporate hydrophilic components. We found that the extensibility of droplets on Larinioides cornutus threads increased as humidity increased. However, the deflection of the droplets' supporting axial lines did not change, indicating that atmospheric water uptake increases glycoprotein plasticity, but not glycoprotein adhesion. The extensibility of droplets, along with that of the thread's supporting axial fibers, is responsible for summing the adhesion of multiple thread droplets. Therefore, daily changes in humidity have the potential to significantly alter the performance of viscous threads and orb webs.

Spider silk: understanding the structure-function relationship of a natural fiber

Spider silk is of great interest because of its extraordinary physical properties, such as strength and toughness. Here we discuss how these physical properties relate to the way in which spiders have utilized this material in prey capture, forcing its evolution to a high-performance fiber. Female spiders can produce up to seven different types of silk, and all these have different physical properties, which relate to their various functions. The variation in properties are due to underlying differences in the proteins making up these silks. As our understanding of spider silk has increased in the recent years, it has been possible to produce recombinant versions of the respective proteins. Recombinant proteins open up the potential to produce synthetic silk fibers with properties similar to those of the natural spider silk threads.