Catechol Redox Induced Formation of Metal Core-Polymer Shell Nanoparticles

Insights into the physico-chemical and biological characterization of sodium lignosulfonate - silver nanosystems designed for wound management

Chronic wounds represent one of the complications that might occur from the disruption of wound healing process. Recently, there has been a rise in interest in employing nanotechnology to develop novel strategies for accelerating wound healing. The aim of the present study was to use a green synthesis method to obtain AgNPs/NaLS systems useful for wounds management and perform an in-depth investigation of their behavior during and post-synthesis as well as of their biological properties. The colloids obtained from silver nanoparticles (AgNPs) and commercial sodium lignosulfonate (NaLS) in a single-pot aqueous procedure have been fully characterized by UV-Vis, FT-IR, DLS, TEM, XRD, and XPS to evaluate the synthesis efficiency and to provide new insights in the process of AgNPs formation and NaLS behavior in aqueous solutions. The effects of various concentrations of NaLS (0-16 mg/mL) and AgNO3 (0-20 mM) and of two different temperatures on AgNPs formation have been analyzed. Although the room temperature is feasible for AgNPs synthesis, the short mixing at 70 °C significantly increases the speed of nanoparticle formation and storage stability. In all experimental conditions AgNPs of 20-40 nm in size have been obtained. The antimicrobial activity assessed quantitatively on clinical and reference bacterial strains, both in suspension and biofilm growth state, revealed a broad antimicrobial spectrum, the most intensive inhibitory effect being noticed against Pseudomonas aeruginosa and Escherichia coli strains. The AgNP/NaLS enhanced the NO extracellular release, potentially contributing to the microbicidal and anti-adherence activity by protein oxidation. Both AgNP/NaLS and NaLS were non-hemolytic (hemolytic index<5%, 2.26 ± 0.13% hemolysis) and biocompatible (102.17 ± 3.43 % HaCaT cells viability). The presence of AgNPs increased the antioxidative activity and induced a significant cytotoxicity on non-melanoma skin cancer cells (62.86 ± 8.27% Cal-27 cells viability). Taken together, all these features suggest the multivalent potential of these colloids for the development of novel strategies for wound management, acting by preventing infection-associated complications and supporting the tissue regeneration.

Antibacterial chitosan-based composite sponge with synergistic hemostatic effect for massive haemorrhage

Uncontrollable acute bleeding and wound infection pose significant challenges in emergency treatment and surgical operations. Therefore, the research and development of highly efficient antibacterial hemostatic agents are of great importance in reducing the mortality rate among patients with massive hemorrhage. In this study, we utilized hydrophobically modified chitosan (HM-CS) and gallic acid chitosan (GA-CS) to create a composite sponge (HM/GA-CS) that exhibits complementary advantages. The composite sponge combines the alkyl chain and polyphenol structure, allowing it to adsorb blood cells and plasma proteins simultaneously. This synergistic effect was confirmed through various tests, including blood cell adhesion, plasma protein barrier behavior, and in vitro hemostatic testing. Furthermore, experiments conducted on a rat liver injury model demonstrated that the composite sponge achieved rapid coagulation within 52 s, resulting in significantly lower bleeding volume compared with traditional gauze. In addition, the incorporation of GA-CS into HM-CS enhanced the antibacterial properties of the composite sponge. The antibacterial rate of the composite sponge against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) reached 100 % and 98.2 %, respectively. To evaluate its biocompatibility, the composite sponge underwent blood compatibility and cell activity tests, confirming its suitability. The HM/GA-CS sponge holds promising applications in managing cases of massive hemorrhage.

Combined Catalysis: A Powerful Strategy for Engineering Multifunctional Sustainable Lignin-Based Materials

The production and engineering of sustainable materials through green chemistry will have a major role in our mission of transitioning to a more sustainable society. Here, combined catalysis, which is the integration of two or more catalytic cycles or activation modes, provides innovative chemical reactions and material properties efficiently, whereas the single catalytic cycle or activation mode alone fails in promoting a successful reaction. Polyphenolic lignin with its distinctive structural functions acts as an important template to create materials with versatile properties, such as being tough, antimicrobial, self-healing, adhesive, and environmentally adaptable. Sustainable lignin-based materials are generated by merging the catalytic cycle of the quinone-catechol redox reaction with free radical polymerization or oxidative decarboxylation reaction, which explores a wide range of metallic nanoparticles and metal ions as the catalysts. In this review, we present the recent work on engineering lignin-based multifunctional materials devised through combined catalysis. Despite the fruitful employment of this concept to material design and the fact that engineering has provided multifaceted materials able to solve a broad spectrum of challenges, we envision further exploration and expansion of this important concept in material science beyond the catalytic processes mentioned above. This could be accomplished by taking inspiration from organic synthesis where this concept has been successfully developed and implemented.

Recent developments in the use of gold and silver nanoparticles in biomedicine

Gold and silver nanoparticles (NPs) are widely used in the biomedical research both in the therapeutic and the sensing/diagnostics fronts. Both metals share some common optical properties with surface plasmon resonance being the most widely exploited property in therapeutics and diagnostics. Au NPs exhibit excellent light‐to‐heat conversion efficiencies and hence have found applications primarily in precision oncology, while Ag NPs have excellent antibacterial properties which can be harnessed in biomaterials' design. Both metals constitute excellent biosensing platforms owing to their plasmonic properties and are now routinely used in various optical platforms. The utilization of Au and Ag NPs in the COVID‐19 pandemic was rapidly expanded mostly in biosensing and point‐of‐care platforms and to some extent in therapeutics. In this review article, the main physicochemical properties of Au and Ag NPs are discussed with selective examples from the recent literature.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

Mussel‐Inspired Biomaterials: From Chemistry to Clinic

After several billions of years, nature still makes decisions on its own to identify, develop, and direct the most effective material for phenomena/challenges faced. Likewise, and inspired by the nature, we learned how to take steps in developing new technologies and materials innovations. Wet and strong adhesion by Mytilidae mussels (among which Mytilus edulis—blue mussel and Mytilus californianus—California mussel are the most well‐known species) has been an inspiration in developing advanced adhesives for the moist condition. The wet adhesion phenomenon is significant in designing tissue adhesives and surgical sealants. However, a deep understanding of engaged chemical moieties, microenvironmental conditions of secreted proteins, and other contributing mechanisms for outstanding wet adhesion mussels are essential for the optimal design of wet glues. In this review, all aspects of wet adhesion of Mytilidae mussels, as well as different strategies needed for designing and fabricating wet adhesives are discussed from a chemistry point of view. Developed muscle‐inspired chemistry is a versatile technique when designing not only wet adhesive, but also, in several more applications, especially in the bioengineering area. The applications of muscle‐inspired biomaterials in various medical applications are summarized for future developments in the field.

Metal Ion-Directed Functional Metal-Phenolic Materials

Metal ions are ubiquitous in nature and play significant roles in assembling functional materials in fields spanning chemistry, biology, and materials science. Metal-phenolic materials are assembled from phenolic components in the presence of metal ions through the formation of metal-organic complexes. Alkali, alkali-earth, transition, and noble metal ions as well as metalloids interacting with phenolic building blocks have been widely exploited to generate diverse hybrid materials. Despite extensive studies on the synthesis of metal-phenolic materials, a comprehensive summary of how metal ions guide the assembly of phenolic compounds is lacking. A fundamental understanding of the roles of metal ions in metal-phenolic materials engineering will facilitate the assembly of materials with specific and functional properties. In this review, we focus on the diversity and function of metal ions in metal-phenolic material engineering and emerging applications. Specifically, we discuss the range of underlying interactions, including (i) cation-π, (ii) coordination, (iii) redox, and (iv) dynamic covalent interactions, and highlight the wide range of material properties resulting from these interactions. Applications (e.g., biological, catalytic, and environmental) and perspectives of metal-phenolic materials are also highlighted.

Nanocomposite Polymer Colloids Prepared via Emulsion Polymerization and Stabilized Using Polydopamine-Coated Silica Particles

Polymer/inorganic colloidal nanocomposites can be prepared via Pickering emulsion polymerization (PEP); however, this process usually requires the use of surfactants, auxiliary comonomers, and volatile organic compounds. Herein, we report a versatile and efficient method for synthesizing stable monodisperse polymer/silica colloidal nanocomposite particles via PEP. First, silica nanoparticles were modified by depositing a multifunctional polydopamine (PDA) film. The outermost PDA film could enhance the precipitation of oligomeric polymer radicals on the silica surface, which is crucial for the preparation of stable polymer/inorganic colloidal nanocomposites via PEP. Notably, this PDA modification approach can employ different initiator systems, such as cationic initiators and redox initiator couples, and can be applied to various monomers and monomer pairs (St, St/nBA, MMA, MMA/nBA, Vac, Vac/nBA). The influence of the concentration and size of polydopamine-coated silica (SiO₂@PDA) on the colloidal nanocomposite was investigated. Increasing the diameter of SiO₂@PDA and decreasing the concentration of SiO₂@PDA both lead to the formation of larger nanocomposite particles. Considering its wide applicability, the proposed PDA modification approach can be applied to other functional inorganic particles to prepare multifunctional polymer/inorganic nanocomposite particles.

"Raspberry" Hierarchical Topographic Features Regulate Human Mesenchymal Stem Cell Adhesion and Differentiation via Enhanced Mechanosensing

An understanding of cellular mechanoresponses to well-defined synthetic topographic features is crucial for the fundamental research and biomedical applications of stem cells. Structured biointerfaces, in particular the ones with nanometer and/or micrometer surficial features, have drawn more attention in the past few decades. However, it is still difficult to integrate nanostructures and microstructures onto the synthesized biointerfaces to mimic the hierarchical architecture of the native extracellular matrix (ECM). Herein, a series of "raspberry"-like hierarchical surfaces with well-defined nanofeatures and tunable nano/microfeatures have been achieved via a catecholic polymer coating technique. Cellular responses to these hierarchical interfaces were systemically studied, indicating that the nanofeatures on the raspberry surfaces significantly enhanced the mechanosensing of human mesenchymal stem cells (hMSCs) to interfacial physical cues. Cell mechanotransduction was further investigated by analyzing focal adhesion assembling, cytoskeleton organization, cell nuclear mechanics, and transcriptional activity. The results suggest that nanosize surficial features could increase cellular mechanosensing to environment physical cues. The mechanotransduction and cell fate specification were greatly enhanced by the ECM mimicking nano/microhierarchical biointerfaces but the features should be in an optimized size.

Mussel-Inspired Carboxymethyl Chitosan Hydrogel Coating of Titanium Alloy with Antibacterial and Bioactive Properties

Infection-related titanium implant failure rates remain exceedingly high in the clinic. Functional surface coating represents a very promising strategy to improve the antibacterial and bioactive properties of titanium alloy implants. Here, we describe a novel bioactive surface coating that consists of a mussel-inspired carboxymethyl chitosan hydrogel loaded with silver nanoparticles (AgNPs) to enhance the bioactive properties of the titanium alloy. The preparation of hydrogel is based on gallic acid grafted carboxymethyl chitosan (CMCS-GA) catalyzed by DMTMM (4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride). To build a firm bonding between the hydrogel and titanium alloy plate, a polydopamine layer was introduced onto the surface of the titanium alloy. With HRP/H₂O₂ catalysis, CMCS-GA can simply form a firm gel layer on the titanium alloy plate through the catechol groups. The surface properties of titanium alloy were characterized by scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and water contact angle. Silver nanoparticles were loaded into the gel layer by in situ reduction to enhance the antibacterial properties. In vitro antibacterial and cell viability experiments showed that the AgNPs-loaded Ti-gel possesses excellent antibacterial properties and did not affect the proliferation of rabbit mesenchymal stem cells (MSCs).

Preparation of UiO-66-NH2@PDA under Water System for Chemical Warfare Agents Degradation

There is an urgent need to develop catalytic degradation technologies for chemical warfare agents (CWAs) that are environmentally friendly and do not require secondary treatment. UiO-66-NH₂ and other metal–organic frameworks (MOFs) based on zirconium have been shown to promote the catalytic degradation of CWAs. At the same time, MOFs have been studied, and they have shown interesting properties in CWA removal because of their ultrahigh surface area, tunable structures, and periodically distributed abundant catalytic sites. However, MOFs synthesized by conventional methods are mostly powdery crystals that are difficult to process and have poor mechanical stability, which largely limit the development of MOFs in practical applications. An emerging trend in MOF research is hybridization with flexible materials. Polymers possess a variety of unique attributes, such as flexibility, thermal and chemical stability, and process ability, and these properties can be combined with MOFs to make a low-cost and versatile material that also provides convenience for the subsequent integration of such MOFs into independent substrates or textiles. In this article, we used a green and simple method to coat the surface of UiO-66-NH₂ with polydopamine (PDA), PDA can promote the catalytic hydrolysis of UiO-66-NH₂ to DMNP (a simulant of chemical warfare agents). Additionally, it can adsorb the toxic hydrolysis product p-nitrophenol, avoiding the trouble of secondary treatment. The half-life of UiO-66-NH₂ coated with polydopamine (UiO-66-NH₂@PDA) for catalytic hydrolysis is 8.9 min, and that of pure UiO-66-NH₂ is 20 min. We speculate that the surface coated with PDA can improve the diffusion of DMNP to the active sites of UiO-66-NH₂.

Dispersant Molecules with Functional Catechol Groups for Supercapacitor Fabrication

Cathodes for supercapacitors with enhanced capacitive performance are prepared using MnO₂ as a charge storage material and carbon nanotubes (CNT) as conductive additives. The enhanced capacitive properties are linked to the beneficial effects of catecholate molecules, such as chlorogenic acid and 3,4,5-trihydroxybenzamide, which are used as co-dispersants for MnO₂ and CNT. The dispersant interactions with MnO₂ and CNT are discussed in relation to the chemical structures of the dispersant molecules and their biomimetic adsorption mechanisms. The dispersant adsorption is a key factor for efficient co-dispersion in ethanol, which facilitated enhanced mixing of the nanostructured components and allowed for improved utilization of charge storage properties of the electrode materials with high active mass of 40 mg cm⁻². Structural peculiarities of the dispersant molecules are discussed, which facilitate dispersion and charging. Capacitive properties are analyzed using cyclic voltammetry, chronopotentiometry and impedance spectroscopy. A capacitance of 6.5 F cm⁻² is achieved at a low electrical resistance. The advanced capacitive properties of the electrodes are linked to the microstructures of the electrodes prepared in the presence of the dispersants.

Colorimetric sensors and nanoprobes for characterizing antioxidant and energetic substances

The development of analytical techniques for antioxidant compounds is important, because antioxidants that can inactivate reactive species and radicals are health-beneficial compounds, also used in the preservation of food and protection of almost every kind of organic substance from oxidation. Energetic substances include explosives, pyrotechnics, propellants and fuels, and their determination at bulk/trace levels is important for the safety and well-being of modern societies exposed to various security threats. Most of the time, in field/on site detection of these important analytes necessitates the use of colorimetric sensors and probes enabling naked-eye detection, or low-cost and easy-to-use fluorometric sensors. The use of nanosensors brings important advantages to this field of analytical chemistry due to their various physico-chemical advantages of increased surface area, surface plasmon resonance absorption of noble metal nanoparticles, and superior enzyme-mimic catalytic properties. Thus, this critical review focuses on the design strategies for colorimetric sensors and nanoprobes in characterizing antioxidant and energetic substances. In this regard, the main themes and properties in optical sensor design are defined and classified. Nanomaterial-based optical sensors/probes are discussed with respect to their mechanisms of operation, namely formation and growth of noble metal nanoparticles, their aggregation and disaggregation, displacement of active constituents by complexation or electrostatic interaction, miscellaneous mechanisms, and the choice of metallic oxide nanoparticles taking part in such formulations.

Application of Novel 3,4-Dihydroxyphenylalanine-Containing Antimicrobial Polymers for the Prevention of Uropathogen Attachment to Urinary Biomaterials

Introduction and Objective: Urinary catheters and stents are frequently prone to catheter-associated urinary tract infections (CAUTI) through biofilm formation. Several strategies have been evaluated in search of a stent coating to reliably prevent adherence of bacteria and biofilm. Previous in vivo and in vitro research with methoxylated polyethylene glycol 3,4-dihydroxyphenylalanine (DOPA) copolymer as a candidate coating showed promising results to reduce the bacterial attachment. We aimed to further enhance this antimicrobial activity by adding antimicrobial agents to newly synthesized DOPA-based copolymers. Materials and Methods: Building on our previous experience, novel copolymers were engineered based on DOPA. Quaternary ammonium groups and silver particles were added by cross-linking to increase the antimicrobial activity through both kill-by-contact and planktonic killing. After coating polyurethane sheets and measuring contact angles, all candidate coatings were challenged in vitro with an Escherichia coli culture. The most promising coatings were then further evaluated against a panel of seven clinically relevant uropathogens and planktonic killing, and microbial attachment was determined. Results: Initially, seven coatings were developed, referred to as Surphys 093-099. The most significant increase in contact angle was identified in Surphys-095 and -098. Surphys coatings S-094, S-095, and S-098 were cross-linked with silver and exhibited profound antimicrobial properties when challenged with E. coli. Further testing demonstrated S-095 to have antimicrobial efficacy against gram-positive and gram-negative bacteria at different silver-loading concentrations. The final coating, consisting of a 2 mg/mL solution of S-095 cross-linked with 0.25 mg/mL AgNO₃, appeared to be highly bactericidal showing a ≥99.9% bacterial killing effect while remaining below cytotoxicity levels. Conclusions: We were able to engineer DOPA-based copolymers and add quaternary ammonium and silver particles, thus increasing the bactericidal properties of the coating. These coatings have exhibited a biologically significant ability to prevent uropathogens from attaching to biomaterials and represent a realistic opportunity to combat CAUTI.

Universal Antifogging and Antimicrobial Thin Coating Based on Dopamine-Containing Glycopolymers

A novel strategy for preparing universal antifogging and antimicrobial coating is reported by the means of one-step coating and Ag nanoparticle (AgNP) formation in situ. A series of hydrophilic glycopolymers including poly(N-3,4-dihydroxybenzenethyl methacrylamide-co-2-deoxy-2-(methacrylamido)glucopyranose) (P1s) and poly(N-3,4-dihydroxybenzenethyl methacrylamide-co-methacrylic acid-co-2-deoxy-2-(methacrylamido)glucopyranose) (P2s) were synthesized by sunlight-induced reverse addition-fragmentation chain transfer (RAFT) polymerization. With the ability to strongly immobilize onto organic and inorganic surfaces (i.e., glass slide, silicon wafer, and polycarbonate) via catechol groups, P1s are very convenient to form superhydrophilic and transparent thin coatings, which result in a unique antifogging property. Additionally, the antimicrobial property is realized by in situ AgNPs forming P2 coatings, facilitated by the presence of carboxyl groups and catechol groups in the polymer chain, rendering it superior antimicrobial activity against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus microorganisms. This antifogging and antimicrobial thin coating shows strong prospects in medical and optical devices, with the extra benefits of avoiding potential pathogen infection in vitro or while in storage.

Multifunctional and Transformable 'Clickable' Hydrogel Coatings on Titanium Surfaces: From Protein Immobilization to Cellular Attachment

Multifunctionalizable hydrogel coatings on titanium interfaces are useful in a wide range of biomedical applications utilizing titanium-based materials. In this study, furan-protected maleimide groups containing multi-clickable biocompatible hydrogel layers are fabricated on a titanium surface. Upon thermal treatment, the masked maleimide groups within the hydrogel are converted to thiol-reactive maleimide groups. The thiol-reactive maleimide group allows facile functionalization of these hydrogels through the thiol-maleimide nucleophilic addition and Diels-Alder cycloaddition reactions, under mild conditions. Additionally, the strained alkene unit in the furan-protected maleimide moiety undergoes radical thiol-ene reaction, as well as the inverse-electron-demand Diels-Alder reaction with tetrazine containing molecules. Taking advantage of photo-initiated thiol-ene 'click' reactions, we demonstrate spatially controlled immobilization of the fluorescent dye thiol-containing boron dipyrromethene (BODIPY-SH). Lastly, we establish that the extent of functionalization on hydrogels can be controlled by attachment of biotin-benzyl-tetrazine, followed by immobilization of TRITC-labelled ExtrAvidin. Being versatile and practical, we believe that the described multifunctional and transformable 'clickable' hydrogels on titanium-based substrates described here can find applications in areas involving modification of the interface with bioactive entities.

Self-Polymerized Dopamine-Decorated Au NPs and Coordinated with Fe-MOF as a Dual Binding Sites and Dual Signal-Amplifying Electrochemical Aptasensor for the Detection of CEA

Fabrication of functional electrochemical biosensor is a hot topic; however, precise and sensitive cancer detection in early clinical diagnosis is still a great challenge. Continuous efforts have been devoted to explore functional materials for this issue. In this work, we developed a dual binding sites and dual signal-amplifying electrochemical aptasensor of self-polymerized dopamine-decorated Au and coordinated with Fe-MOF (Au@PDA@Fe-MOF) for the detection of carcinoembryonic antigen (CEA). Remarkably, Au@PDA@Fe-MOF features high sensitivity, multiple active sites, good biocompatibility, and excellent selectivity, which is attributed to abundant -COOH in porous Fe-MOF and unsaturated Fe³⁺ sites on the surface of Fe-MOF as the active binding sites grafting more NH₂-functionalized CEA-specific aptamer and redox PDA and Fe-MOF accelerating the movement of electrons for dual signal amplifying. Meanwhile, the electrochemical aptasensor shows favorable repeatability with 1.82% relative standard deviation (RSD) under five independent aptasensors and strong stability with only 3.3% degradation after 12 days of storage. In addition, the aptasensor has wide CEA detection range from 1 fg mL^-1 to 1 μg mL^-1 with a low detection limit of 0.33 fg mL^-1 (S/N = 3). Furthermore, the aptasensor is feasible for accurate and quantitative detection of CEA in serum samples with RSD below 2.32%. The satisfying results demonstrate promising applications of the CEA aptasensor in practical sample analysis and lay an important foundation for other biomarker detection in early clinical diagnosis.

Biomimetic catechol-based adhesive polymers for dispersion of polytetrafluoroethylene (PTFE) nanoparticles in an aqueous medium

Biomimetic synthetic functional materials are valuable for a large number of practical applications with improved or tunable performance. In this paper, we present a series of mussel-inspired biomimetic catechol-containing copolymers synthesized from dopamine methacrylamide (DMA) and 2-(2-ethoxyethoxy)ethyl acrylate (EEA) and abbreviated as poly(PDMA-PEEA). The successfully synthesized adhesive polymers allow adhering polytetrafluoroethylene (PTFE) and were used for coating PTFE particles in organic solvent and re-dispersion in an aqueous medium. Adhesive polymer coated PTFE particles were efficiently used as a nanoreactor for generating silver (Ag) metal nanoparticles (NPs).

Isolated Effects of Surface Ligand Density on the Catalytic Activity and Selectivity of Palladium Nanoparticles

Alkanethiolate-capped palladium nanoparticles (PdNPs) have previously been synthesized by using a modified Brust-Schiffrin synthesis (using alkanethiosulfate instead of alkanethiol), in which the nanoparticle core size is established during alkanethiosulfate ligand passivation of the nanoparticle nucleation-growth initiated by borohydride reduction. Because of the dependence of core size on the amount of ligand present, surface ligand density decreases with increasing core size. Herein we present a method in which the core size is established independent of ligand addition, allowing the formation of PdNPs with similar core sizes yet different surface ligand densities. In this method, the core size is established during the temporary passivation of growing nanoparticles by borohydride and tetra-N-octylammonium bromide (TOAB), allowing nucleation to reach completion. Various molar equivalents of alkyl thiosulfate are then added, prompting the replacement of borohydride and TOAB and the formation of alkanethiolate-capped PdNPs. The resulting PdNPs were characterized by using ¹H NMR, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The overall enhanced catalytic activity of hydrogenation/isomerization of alkenes and dienes was observed for PdNPs with a lower ligand density, proving the isolated effect of surface ligand density from other variations such as core size and shape. Surface ligand density is also shown to influence the hydrogenation/isomerization product selectivity of the catalytic reactions by regulating the formation of certain Pd-substrate intermediates and the kinetic diffusion of surface hydrogen/substrates.

A Magnetic Dynamic Microbiointerface with Biofeedback Mechanism for Cancer Cell Capture and Release

Dynamic biointerfaces with reversible surface bioactivities enable dynamic modulation of cell-material interactions, thus attracting great attention in biomedical science. Herein, we demonstrated a paradigm shift of dynamic biointerfaces from macroscopical substrates to micron-sized particles by reversible engineering of a phenylboronic acid (PBA)-functionalized magnetic microbead with mussel-inspired cancer cell-targeting peptide. Due to reversible catechol-boronate interactions between the peptides and microbeads, the micron-sized dynamic biointerface exhibited sugar-responsive cancer-targeting activity, showing the potential as a microplatform for magnetic and noninvasive isolation of cancer cells through natural biofeedback mechanism (e.g., human glycemic volatility). Our results demonstrated that the dynamic magnetic platform was capable of selective cancer cell capture (∼85%) and sugar-triggered release of them (>93%) in cell culture medium with high efficiency. More importantly, by using this platform, a decent number of target cells (∼23 on average) could be magnetically isolated and identified from artificial CTC blood samples (1 mL) spiked with 100 cancer cells. In view of the biomimetic nature, high capture efficiency, excellent selectivity, and superiority in cell separation and purification processes, the dynamic magnetic microplatform reported here would be a promising and general tool for rare cell detection and separation and cell-based disease diagnosis.

Functional Macromolecule-Enabled Colloidal Synthesis: From Nanoparticle Engineering to Multifunctionality

The synthesis of well-defined inorganic colloidal nanostructures using functional macromolecules is an enabling technology that offers the possibility of fine-tuning the physicochemical properties of nanomaterials and has contributed to a broad range of practical applications. The utilization of functional reactive polymers and their colloidal assemblies leads to a high level of control over structural parameters of inorganic nanoparticles that are not easily accessible by conventional methods based on small-molecule ligands. Recent advances in polymerization techniques for synthetic polymers and newly exploited functions of natural biomacromolecules have opened up new avenues to monodisperse and multifunctional nanostructures consisting of integrated components with distinct chemistries but complementary properties. Here, the evolution of colloidal synthesis of inorganic nanoparticles is revisited. Then, the new developments of colloidal synthesis enabled by functional macromolecules and practical applications associated with the resulting optical, catalytic, and structural properties of colloidal nanostructures are summarized. Finally, a perspective on new and promising pathways to novel colloidal nanostructures built upon the continuous development of polymer chemistry, colloidal science, and nanochemistry is provided.

Adhesion Control of Branched Catecholic Polymers by Acid Stimulation

Biomimetic material design is a useful method for producing new functional materials. In recent years, catecholic polymers inspired from the adhesion mechanism of marine organisms have attracted attention. Here, we demonstrated the preparation of catecholic polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization of an acetonide-protected catecholic monomer, that is, N-(2-(2,2-dimethylbenzo-1,3-dioxol-5-yl)ethyl)-acrylamide (DDEA). By selecting the specific RAFT reagents, well-defined branched PDDEA and linear PDDEA were obtained. These PDDEA samples showed stronger adhesion strength after deprotection by acid stimulation compared with that before deprotection. In addition, we demonstrated the adhesion control of synthetic polymers by photoirradiation in the presence of photoacid generators, which decompose under light and release an acid.

Polyaspartamide Functionalized Catechol-Based Hydrogels Embedded with Silver Nanoparticles for Antimicrobial Properties

In this study, polyaspartamide-based hydrogels were synthesized by boron-catechol coordination followed by incorporation of AgNPs into the materials. Free catechol moieties were exploited to produce AgNPs. TEM analyses displayed AgNPs of less than 20 nm in diameter and with minimum aggregation, attesting the role of hydrogels to act as an efficient template for the production of dispersed particles. XRD analyses confirmed the mean particle size using the Scherrer equation. Release kinetic studies were performed in DMEM medium, showing a slow release over a long time-period. Finally, the MIC and MBC were determined, demonstrating a bacteriostatic and bactericidal effect against Gram-positive S. aureus and Gram-negative E. coli.

In-situ deposition of gold nanoparticles onto polydopamine-decorated g-C3N4 for highly efficient reduction of nitroaromatics in environmental water purification

A green synthesized gold-catalyst (PDA-g-C₃N₄/Au) for highly efficient reduction of nitroaromatics by NaBH₄ was proposed. Polydopamine (PDA) served as the reductant and stabilizer for AuNPs reduction, avoiding the use of chemical reductant and stabilizer that may result in secondary contamination. g-C₃N₄ not only acted as the support but also provided compatibility for AuNPs deposition, enhancing the stability and deposition of AuNPs, which improved the catalytic activity. Different experimental parameters including the amount of Au loading, concentration of NaBH₄, and dosage of catalyst were studied. Results showed that PDA-g-C₃N₄/Au₍₃₎ revealed higher catalytic activity with a rate constant of 0.0514 s^-1 and TOF of 545.60 h^-1 for 4-NP reduction. In addition, the catalyst was highly efficient in reduction of other nitroaromatics and the reduction rates of these compounds were found as the sequence: methyl orange > 2-nitrophenol > 2, 4-dinitrophenol > Erichrome Black T > Congo red. Moreover, the PDA-g-C₃N₄/Au₍₃₎ catalyst kept high stability and excellent conversion efficiency over ten reduction cycles. The practical application on different real water samples suggests that this Au catalyst has promising application in environmental water purification. The simple and green synthetic Au catalyst expands the range of application and provides potential application on environmental remediation.

Biological macromolecule delivery system fabricated using zein and gum arabic to control the release rate of encapsulated tocopherol during in vitro digestion

Nanoparticles were fabricated by adsorbing gum arabic (GA) on zein nanoparticles by antisolvent precipitation. The most stable mass ratio of zein:GA was 1:1.5 with a stable zeta-potential (-32.8 mV) in a pH range of 3.0-9.0. The surface hydrophobicity of zein-GA nanoparticles indicated formation of a stable structure through electrostatic attraction at a pH range of 3.0-6.0 and hydrophobic interaction at pH 7.0-9.0. The FTIR spectrogram showed an additional role of hydrogen bonds to promote the adsorption of GA on zein nanoparticles. Tocopherol (TOC) was encapsulated within the prepared zein-GA nanoparticles with a high loading capacity. The presence of GA not only prevented the precipitation of zein nanoparticles but also controlled the release of TOC from zein-GA nanoparticles during in vitro gastrointestinal digestion. Zein-GA biopolymer nanoparticles can be stably fabricated in a wide pH range for applications in the food and pharmacy industries.

Catechol-rich gelatin hydrogels in situ hybridizations with silver nanoparticle for enhanced antibacterial activity

Recently, the interest in antimicrobial hydrogels with impregnated antibacterial agents has significantly increased because of their ability to combat infection in biomedical applications, including wound management, tissue engineering, and biomaterial surface coating. Among these antibacterial reagents, silver nanoparticles (AgNP) show good antibacterial activity against both gram-negative and gram-positive bacteria, including highly multi-resistant strains. However, the entrapment of AgNP within a hydrogel matrix is often associated with toxicity issues because of the use of chemical reductants (e.g., commonly sodium borohydride), burst leaching, or unwanted agglomeration of AgNP in the absence of surfactants or stabilizers. In this study, we present catechol-rich gelatin hydrogels with in situ hybridization of AgNP for enhanced antimicrobial activities. AgNP were formed through a redox reaction between silver ions and the catechol moieties of a gelatin derivative polymer, without the addition of any chemical reductants. The AgNP with an average size of 20 nm were entrapped within hydrogel matrices and showed sustained release from the hydrogel matrix (8.7% for 14 days). The resulting hydrogels could kill both gram-negative and gram-positive bacteria, depending on the amount of AgNP released from the hydrogels and did not have a significant influence on mammalian cell viability. We believe that our catechol-rich hydrogels in situ hybridizations with AgNP have great potential for biomedical applications, such as wound management and surface coating, because of their excellent antibacterial activities and biocompatibility.

Synthesis of Metal Nanoparticles in Metal-Phenolic Networks: Catalytic and Antimicrobial Applications of Coated Textiles

The synthesis of metal nanoparticle (NP)-coated textiles (nanotextiles) is achieved by a dipping process in water without toxic chemicals or complicated synthetic procedures. By taking advantage of the unique nature of tannic acid, metal-phenolic network-coated textiles serve as reducing and stabilizing sites for the generation of metal nanoparticles of controllable size. The textiles can be decorated with various metal nanoparticles, including palladium, silver, or gold, and exhibit properties derived from the presence of the metal nanoparticles, for example, catalytic activity in water (>96% over five cycles using palladium nanoparticles) and antibacterial activity against Gram-negative bacteria (inhibition of Escherichia coli using silver nanoparticles) that outperforms a commercial bandage. The reported strategy offers opportunities for the development of hybrid nanomaterials that may have application in fields outside of catalysis and antimicrobials, such as sensing and smart clothing.

Bioinspired and biocompatible carbon nanotube-Ag nanohybrid coatings for robust antibacterial applications

The design of self-sterilizing surfaces with favorable biocompatibility is acknowledged as an effective approach to deal with the bacterial infections of biomedical devices. In this study, we report an intriguing protocol for the large-scale fabrication of self-sterilizing and biocompatible surface film coatings by using polymer shielded silver nanoparticle loaded oxidized carbon nanotube (AgNPs@oCNT) nano-dispersions. To achieve the antibacterial coatings, the bioinspired positively charged and negatively charged AgNPs@oCNTs were alternately deposited onto substrates by spray-coating assisted layer-by-layer assembly. Then the bacterial inhibitory zones, optical density value monitoring, bacterial killing efficiency and adhesion were investigated; and all the results revealed that the AgNPs@oCNTs thin film coatings exhibited robust and long-term antibacterial activity against both Gram negative and Gram positive bacteria. Moreover, due to the shielding effects of polymer layers, the coatings showed extraordinary blood compatibility and limited toxicity against human umbilical vein endothelial cells. It is believed that the proposed large-scale fabrication of bactericidal, blood and cell compatible AgNPs@oCNT based thin film coatings will have great potential to forward novel operational pathogenic inhibition strategies to avoid undesired bacterial contaminations of biomedical implants or biological devices.

STATEMENT OF SIGNIFICANCE

Bacterial infection of medical devices has been considered to be a world-wide clinical threat towards patients' health. In this study, a bioinspired and biocompatible antibacterial coating was prepared via the spray-assisted layer-by-layer (LbL) assembly. The silver nanopartilces loaded oxidized carbon nanotube (AgNPs@oCNT), which were coated by functional polymers (chitosan and synthetic heparin mimicking polymers), were prepared via mussel inspired chemistry; and the spray-assisted assembly process allowed the fast construction on devices. Owing to the antibacterial efficiency of the loaded AgNPs, the coating showed robust bacterial killing activity and resistance towards bacterial adhesion. Moreover, since that the AgNPs were shielded by the polymers, the coating exhibited no clear toxicity at blood or cellular level. Benefiting from the universal and large-scale fabrication advancements of the spray assisted LbL coating; it is believed that the proposed strategy can be applied in designing many other kinds of self-sterilizing biomedical implants and devices.

Recent approaches in designing bioadhesive materials inspired by mussel adhesive protein

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhesion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized polymers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface drying properties, control of the oxidation state of catechol, among other features. We also summarized recent developments in designing advanced biomimetic materials including coacervate-forming adhesives, mechanically improved nano- and micro-composite adhesive hydrogels, as well as smart and self-healing materials. Finally, we review the applications of catechol-functionalized materials for the use as biomedical adhesives, therapeutic applications, and antifouling coatings. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 9-33.

Mechanosynthesized copper(i) complex based initiating systems for redox polymerization: towards upgraded oxidizing and reducing agents

Significant improvements of the recently proposed Cu(i)/VitC + water/dibenzoyl peroxide (BPO) system for the redox free radical polymerization of methacrylates in air are presented here.

Polydopamine-Enabled Approach toward Tailored Plasmonic Nanogapped Nanoparticles: From Nanogap Engineering to Multifunctionality

We present a platform strategy that offers diverse flexibility in tailoring the structure and properties of core-shell plasmonic nanoparticles with built-in nanogaps. Our results have demonstrated that polydopamine serves multiple concerted functions as a nanoscale spacer to afford controllable nanogap sizes, a redox-active coating to promote metal shell growth, and a reactive scaffold to exclusively lock molecular probes inside the nanogap for surface-enhanced Raman scattering (SERS). More interestingly, the universal adhesion of polydopamine on diverse colloidal substrates allows for customized synthesis of multishell plasmonic nanogapped nanoparticles (NNPs) and multifunctional hybrid NNPs containing different cores (i.e., magnetic nanoparticles), which are not readily accessible by conventional methods. Internally coupled plasmonic NNPs with broadly tunable spectroscopic properties, highly active SERS, and multifunctionality hold great promise for emerging fields, such as sensing, optoelectronics, and theranostics, as demonstrated by the ultrasensitive SERS detection and efficient photothermal killing of food-borne pathogens here.

Polydopamine-Coated Manganese Complex/Graphene Nanocomposite for Enhanced Electrocatalytic Activity Towards Oxygen Reduction

Platinum electrodes are commonly used electrocatalysts for oxygen reduction reactions (ORR) in fuel cells. However, this material is not economical due to its high cost and scarcity. We prepared an Mn(III) catalyst supported on graphene and further coated with polydopamine, resulting in superior ORR activity compared to the uncoated PDA structures. During ORR, a peak potential at 0.433 V was recorded, which is a significant shift compared to the uncoated material's -0.303 V (both versus SHE). All the materials reduced oxygen in a wide pH range via a four-electron pathway. Rotating disk electrode and rotating ring disk electrode studies of the polydopamine-coated material revealed ORR occurring via 4.14 and 4.00 electrons, respectively. A rate constant of 6.33 × 10(6) mol(-1)s(-1) was observed for the polydopamine-coated material-over 4.5 times greater than the uncoated nanocomposite and superior to those reported for similar carbon-supported metal catalysts. Simply integrating an inexpensive bioinspired polymer coating onto the Mn-graphene nanocomposite increased ORR performance significantly, with a peak potential shift of over +730 mV. This indicates that the material can reduce oxygen at a higher rate but with lower energy usage, revealing its excellent potential as an ORR electrocatalyst in fuel cells.

Mussel-Inspired Antibacterial and Biocompatible Silver-Carbon Nanotube Composites: Green and Universal Nanointerfacial Functionalization

Nanointerfacial decoration of silver nanoparticles (AgNPs) is an ideal protocol to improve the antibacterial efficiency of diverse nanomaterials, including carbon nanotube (CNT), graphene, and many other intensively studied nanoarchitectures, which provides a tremendous possibility for designing advanced antibacterial biomaterials and biomedical devices. However, the direct exposure of AgNPs will lead to potential mammalian cell apoptosis and death, which significantly limits their biological applications. In this study, we demonstrated a green and one-step approach to achieve robust antibacterial and highly biocompatible AgNP-CNT composites. AgNPs were produced via mussel-inspired "one-step" in situ reduction and coating process and were anchored onto the surface of a CNT. Simultaneously, protective polymer layers were formed to shield the AgNPs to improve their biocompatibility. Because of the bactericidal efficiency of AgNPs, the composites showed robust antibacterial efficiency in terms of both inhibition of bacterial cell growth and bacterial killing activity. Moreover, owing to the shielding effects of the polymer coatings, the nanocomposites exhibited much improved compatibility with human umbilical vein endothelial cells compared with bare AgNP-CNTs. Furthermore, the nanocomposites exhibited good stability in psychological solutions. With integrated excellent antibacterial activity, cell compatibility, and long-term stability, it is believed that the synthesized AgNP-CNT composites will be of promising potential in antibacterial applications. Meanwhile, the proposed strategies can also be applied to fabricate many other kinds of AgNP-based composites because of the versatile functionality of catecholic polymers.

Mussel-Inspired Anisotropic Nanocellulose and Silver Nanoparticle Composite with Improved Mechanical Properties, Electrical Conductivity and Antibacterial Activity

Materials for wearable devices, tissue engineering and bio-sensing applications require both antibacterial activity to prevent bacterial infection and biofilm formation, and electrical conductivity to electric signals inside and outside of the human body. Recently, cellulose nanofibers have been utilized for various applications but cellulose itself has neither antibacterial activity nor conductivity. Here, an antibacterial and electrically conductive composite was formed by generating catechol mediated silver nanoparticles (AgNPs) on the surface of cellulose nanofibers. The chemically immobilized catechol moiety on the nanofibrous cellulose network reduced Ag⁺ to form AgNPs on the cellulose nanofiber. The AgNPs cellulose composite showed excellent antibacterial efficacy against both Gram-positive and Gram-negative bacteria. In addition, the catechol conjugation and the addition of AgNP induced anisotropic self-alignment of the cellulose nanofibers which enhances electrical and mechanical properties of the composite. Therefore, the composite containing AgNPs and anisotropic aligned the cellulose nanofiber may be useful for biomedical applications.