Superparamagnetic Fe(OH)3@Fe3O4 Nanoparticles: An Efficient and Recoverable Catalyst for Tandem Oxidative Amidation of Alcohols with Amine Hydrochloride Salts

Synthesis and characterization of nanocatalyst Cu2+/mesoporous carbon for amidation reactions of alcohols

In this research, mesoporous carbon (MC) with high efficiency (0.65 g yield from 1.0 g MCM-41 and 1.25 g sucrose) was successfully prepared by adding carbon precursor (sucrose) in a single step with ultrasonic waves, which reduces time and energy cost. Then, the Cu²⁺/Mesoporous carbon nanocatalyst (Cu²⁺/MC) was synthesized by adding Cu(NO₃)₂ in a single step and applied as a catalyst in amidation reactions of alcohols. Also, Cu²⁺/MC was characterized using different spectroscopic methods and techniques, including Fourier transform infrared spectroscopy (FT-IR), Field Emission Scanning Electron Microscopy (FE-SEM), N₂ adsorption analysis (BET), X-ray diffraction analysis (XRD), Energy Dispersive X-ray (EDX), and Thermogravimetric Analysis (TGA). Moreover, to show the catalytic merits of Cu²⁺/MC, various primary and secondary amines and ammonium salts were applied in the amidation of alcohols. Easy synthesis method, recyclability, excellent yields (80-93%), and simple work-up are some noticeable strengths of using Cu²⁺/MC as a catalyst in this reaction.

Bipolar Membranes Containing Iron-Based Catalysts for Efficient Water-Splitting Electrodialysis

Water-splitting electrodialysis (WSED) process using bipolar membranes (BPMs) is attracting attention as an eco-friendly and efficient electro-membrane process that can produce acids and bases from salt solutions. BPMs are a key component of the WSED process and should satisfy the requirements of high water-splitting capability, physicochemical stability, low membrane cost, etc. The water-splitting performance of BPMs can be determined by the catalytic materials introduced at the bipolar junction. Therefore, in this study, several kinds of iron metal compounds (i.e., Fe(OH)₃, Fe(OH)₃@Fe₃O₄, Fe(OH)₂EDTA, and Fe₃O₄@ZIF-8) were prepared and the catalytic activities for water-splitting reactions in BPMs were systematically analyzed. In addition, the pore-filling method was applied to fabricate low-cost/high-performance BPMs, and the 50 μm-thick BPMs prepared on the basis of PE porous support showed several times superior toughness compared to Fumatech FBM membrane. Through various electrochemical analyses, it was proven that Fe(OH)₂EDTA has the highest catalytic activity for water-splitting reactions and the best physical and electrochemical stabilities among the considered metal compounds. This is the result of stable complex formation between Fe and EDTA ligand, increase in hydrophilicity, and catalytic water-splitting reactions by weak acid and base groups included in EDTA as well as iron hydroxide. It was also confirmed that the hydrophilicity of the catalyst materials introduced to the bipolar junction plays a critical role in the water-splitting reactions of BPM.

Tf2O- and Cu(OTf)2-Assisted Acylamination Reaction of Unactivated Alcohols with Nitriles: A One-Pot P(IV) Activation, Stereoretention in Cycloalkanols and Deprotection Approach

Described herein is a simple, novel, one-pot acylamination reaction of unactivated alcohols. This reaction employs the combination of PCl₃ and triflic anhydride (Tf₂O) or copper triflate Cu(OTf)₂, which serves as a source of P(IV)-activated complex for nitriles to react under the Ritter-type mechanism. The synthetic utility of Tf₂O-promoted reactions was demonstrated by its effectiveness to generate different acylaminated products. By employing Cu(OTf)₂, this method represents a rare example of α-selective acylamination reaction. With chiral cycloalkanols, using the Cu(OTf)₂-promoted procedure, acylaminated products are formed with complete retention of configuration. The synthetic utility of the copper-assisted reaction in acetonitrile was readily demonstrated as a mild deprotection strategy.

Tandem oxidative amidation of benzylic alcohols by copper(II) supported on metformin-graphitic carbon nitride nanosheets as an efficient catalyst

In this research, an efficient heterogeneous catalyst based on graphitic carbon nitride nanosheets (CN) has been reported. The CN was functionalized by 1,3-dibromopropane as a linker (CN-Pr-Br) and subsequently modified with metformin (CN-Pr-Met). Furthermore, the copper(II) was coordinated on modified CN (CN-Pr-Met-Cu(II)) and during this process, 7.94% copper(II) was loaded into the catalyst structure. The synthesized catalyst was evaluated by various techniques including fourier-transform infrared spectroscopy (FT-IR), energy dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and inductively coupled plasma atomic emission spectroscopy (ICP-OES). CN-Pr-Met-Cu(II) was used as a catalyst in the synthesis of amides via the oxidation of benzyl alcohols. The conditions of this reaction were optimized in terms of temperature, time, amount of catalyst, type of base, oxidant, and solvent. Moreover, a variety of amides with an efficiency of 75-95% were synthesized. The reaction was carried out in the presence of benzyl alcohols, amine hydrochloride salts, tert-butyl hydroperoxide (TBHP), CaCO3, and CN-Pr-Met-Cu(II) at 80 °C of acetonitrile solvent. The synthesized catalyst can be easily separated from the reaction medium and reused for 7 consecutive runs without a significant reduction in reaction efficiency.

Copper(II)-β-cyclodextrin immobilized on graphitic carbon nitride nanosheets as a highly effective catalyst for tandem oxidative amidation of benzylic alcohols

In this study, an efficient catalyst based on graphitic carbon nitride nanosheets (CN) and copper(II) supported β-cyclodextrin (β-CD/Cu(II)) was synthesized and used for tandem oxidative amidation of benzylic alcohols. In this regard, CN was functionalized by β-CD/Cu(II) via 1,3-dibromopropane linker (CN-Pr-β-CD/Cu(II)). The prepared catalyst was characterized using FT-IR, XRD, FE-SEM, EDS, TGA, ICP-OES, BET, and TEM analyses. CN-Pr-β-CD/Cu(II) was subsequently applied in a direct oxidative amidation reaction and it was observed that different benzyl alcohols were converted to desire amides with good to excellent efficiency. This reaction was performed in the presence of amine hydrochloride salts, tert-butyl hydroperoxide (TBHP), and Ca2CO3 in acetonitrile (CH3CN) under nitrogen atmosphere. CN-Pr-β-CD/Cu(II) can be recycled and reused five times without significant reduction in reaction efficiency.

Synthesis of MRGO Nanocomposites as a Potential Photocatalytic Demulsifier for Crude Oil-in-Water Emulsion

Oil-in-water (O/W) emulsion has been a major concern for the petroleum industry. A cost-effective magnetite-reduced graphene oxide (MRGO) nanocomposite was synthesized to study the demulsification process of emulsion using said nanocomposite under solar illumination. Characterization data show that the magnetite was successfully deposited on reduced graphene oxide through redox reaction at varying loading amounts of magnetite. Demulsification of the O/W emulsion using MRGO nanocomposite shows that in general the demulsification efficiency was dependent on the loading amount of Fe3O4 on the RGO sheet. It was proposed that the surfactant hydroxyl groups have an affinity towards Fe3O4, which the loading amount was directly proportionate to available active site in Fe3O4. As the loading amount increases, charge recombination centers on the RGO sheet would increase, effectively affecting the charge distribution within MRGO structure.

Fluorinated solvent-assisted photocatalytic aerobic oxidative amidation of alcohols via visible-light-mediated HKUST-1/Cs-POMoW catalysis

Successful synthesis and characterization of HKUST-1/Cs-POMoW binary composite, and application in the photocatalytic aerobic oxidative amidation reaction of alcohols under light illuminating in the visible region.

g-C3N4@Ce-MOF Z-scheme heterojunction photocatalyzed cascade aerobic oxidative functionalization of styrene

A unique composite of the cerium-based metal–organic framework (Ce-UiO-66) modified with graphitic carbon nitride nanosheets (g-C₃N₄) has been synthesized. The g-C₃N₄@Ce-MOF as a photocatalyst was employed in photocatalytic aerobic oxidative Hantzsch pyridine synthesis of styrene.

Selective Synthesis of Monodisperse CoO Nanooctahedra as Catalysts for Electrochemical Water Oxidation

Thermal decomposition is a promising route for the synthesis of metal oxide nanoparticles because size and morphology can be tuned by minute control of the reaction variables. We synthesized CoO nanooctahedra with diameters of ∼48 nm and a narrow size distribution. Full control over nanoparticle size and morphology could be obtained by controlling the reaction time, surfactant ratio, and reactant concentrations. We show that the particle size does not increase monotonically with time or surfactant concentration but passes through minima or maxima. We unravel the critical role of the surfactants in nucleation and growth and rationalize the observed experimental trends in accordance with simulation experiments. The as-synthesized CoO nanooctahedra exhibit superior electrocatalytic activity with long-term stability during oxygen evolution. The morphology of the CoO particles controls the electrocatalytic reaction through the distinct surface sites involved in the oxygen evolution reaction.

New Perspectives on Iron-Based Nanostructures

Among all minerals, iron is one of the elements identified early by human beings to take advantage of and be used. The role of iron in human life is so great that it made an era in the ages of humanity. Pure iron has a shiny grayish-silver color, but after combining with oxygen and water it can make a colorful set of materials with divergent properties. This diversity sometimes appears ambiguous but provides variety of applications. In fact, iron can come in different forms: zero-valent iron (pure iron), iron oxides, iron hydroxides, and iron oxide hydroxides. By taking these divergent materials into the nano realm, new properties are exhibited, providing us with even more applications. This review deals with iron as a magic element in the nano realm and provides comprehensive data about its structure, properties, synthesis techniques, and applications of various forms of iron-based nanostructures in the science, medicine, and technology sectors.

Oxidative amidation by Cu(ii)–guanidine acetic acid immobilized on magnetized sawdust with eggshell as a natural base

Copper(ii)–guanidine acetic acid complex was immobilized on the surface of magnetized raw waste sawdust (SD) as an abundant natural biopolymer and employed as an efficient and recoverable catalyst in oxidative amidation reaction, while waste eggshell (ES) powder was used as a low-cost solid base.

MnO2 @Fe3 O4 Magnetic Nanoparticles as Efficient and Recyclable Heterogeneous Catalyst for Benzylic sp3 C-H Oxidation

Herein, we report a highly chemoselective and efficient heterogeneous MnO₂ @Fe₃ O₄ MNP catalyst for the oxidation of benzylic sp³ C-H group of ethers using TBHP as a green oxidant to afford ester derivatives in high yield under batch/continuous flow module. This catalyst was also effective for the benzylic sp³ C-H group of methylene derivatives to furnish the ketone in high yield which can be easily integrated into continuous flow condition for scale up. The catalyst is fully characterized by spectroscopic techniques and it was found that 0.424 % MnO₂ @Fe₃ O₄ catalyzes the reaction; the magnetic nanoparticles of this catalyst could be easily recovered from the reaction mixture. The recovered catalyst was recycled for twelve cycles without any loss of the catalytic activity. The advantages of MnO₂ @Fe₃ O₄ MNP are its catalytic activity, easy preparation, recovery, and recyclability, gram scale synthesis with a TOF of up to 14.93 h^-1 and low metal leaching during the reaction.

Peroxidation of 2-oxindole and barbituric acid derivatives under batch and continuous flow using an eco-friendly ethyl acetate solvent

We have demonstrated the magnetically retrievable Fe(OH)₃Fe₃O₄catalyzed C–H peroxidation of 2-oxindole and barbituric acid derivatives under batch and continuous flow process for the first time.

Copper-amino group complexes supported on silica-coated magnetite nanoparticles: efficient catalyst for oxidative amidation of methyl arenes

Magnetite nanoparticles coated with mesoporous silica, Fe₃O₄@SiO₂, were prepared.

Copper-Catalyzed Aerobic Oxidative Amidation of Benzyl Alcohols

A Cu-catalyzed synthesis of amides from alcohols and secondary amines using the oxygen in air as the terminal oxidant has been developed. The methodology is operationally simple requiring no high pressure equipment or handling of pure oxygen. The commercially available, nonprecious metal catalyst, Cu(phen)Cl₂, in conjunction with di-tert-butyl hydrazine dicarboxylate and an inorganic base provides a variety of benzamides in moderate to excellent yields. The pK_a of amine conjugate acid and electronics of alcohol were shown to impact the selection of base for optimal reactivity. A mechanism consistent with the observed reactivity trends, KIE, and Hammett study is proposed.

Nonclassical Routes for Amide Bond Formation

The present review offers an overview of nonclassical (e.g., with no pre- or in situ activation of a carboxylic acid partner) approaches for the construction of amide bonds. The review aims to comprehensively discuss relevant work, which was mainly done in the field in the last 20 years. Organization of the data follows a subdivision according to substrate classes: catalytic direct formation of amides from carboxylic and amines ( section 2 ); the use of carboxylic acid surrogates ( section 3 ); and the use of amine surrogates ( section 4 ). The ligation strategies (NCL, Staudinger, KAHA, KATs, etc.) that could involve both carboxylic acid and amine surrogates are treated separately in section 5 .

Ultrasound-assisted direct oxidative amidation of benzyl alcohols catalyzed by graphite oxide

Ultrasound irradiation was successfully applied for the direct oxidative amidation of benzyl alcohols with amines into the corresponding amides using graphite oxide (GO) as an oxidative and reusable solid acid catalyst in acetonitrile as solvent at 50°C under air atmosphere. The direct oxidative amidation of benzyl alcohols takes place under mild conditions yielding the corresponding amides in good to high yields (69-95%) and short reaction times under metal-free conditions.

Practical Synthesis of Amides via Copper/ABNO-Catalyzed Aerobic Oxidative Coupling of Alcohols and Amines

A modular Cu/ABNO catalyst system has been identified that enables efficient aerobic oxidative coupling of alcohols and amines to amides. All four permutations of benzylic/aliphatic alcohols and primary/secondary amines are viable in this reaction, enabling broad access to secondary and tertiary amides. The reactions exhibit excellent functional group compatibility and are complete within 30 min-3 h at rt. All components of the catalyst system are commercially available.

Transamidation of primary carboxamides, phthalimide, urea and thiourea with amines using Fe(OH)3@Fe3O4 magnetic nanoparticles as an efficient recyclable catalyst

The highly efficient transamidation of primary amides, phthalimide, urea and thiourea with amines catalyzed by magnetic Fe₃O₄@Fe(OH)₃ nanoparticles is described.

Green synthesis of primary, secondary, and tertiary amides through oxidative amidation of methyl groups with amine hydrochlorides over recyclable CoFe2O4 NPs

This protocol provides high yield, short reaction time, and operational simplicity, green and low cast procedure for the synthesis of all types of amides.