Dendritic catalysts and dendrimers in catalysis

Carbonylative Cyclization of 2-Iodofluorobenzenes and 2-Aminophenols with Recyclable Palladium-Complexed Dendrimers on SBA-15: One-Pot Synthesis of Dibenzoxazepinones

A novel, efficient, and practical route to dibenzoxazepinones has been developed through a one-pot heterogeneous palladium-catalyzed aminocarbonylation/aromatic nucleophilic substitution (SNAr) sequence starting from readily available 2-iodofluorobenzenes and 2-aminophenols. The carbonylative cyclization reaction proceeds smoothly in dimethyl sulfoxide (DMSO) at 120 °C with 1,8-diazabicyclo(5.4.0)undec-7-ene (DBU) as the base by using a polyamidoamine (PAMAM)-dendronized SBA-15-supported bidentate phosphine-palladium complex [G(1)-2P-Pd(OAc)2-SBA-15] as the catalyst under 10 bar of CO, yielding a wide variety of dibenzo[b,e][1,4]oxazepin-11(5H)-one derivatives in good to excellent yields. Moreover, this new heterogenized dendritic palladium catalyst has competitive advantages in that it can be facilely recovered by simple filtration in air and recycled more than eight times without any significant loss of activity. The broad substrate scope, high functional group tolerance, and excellent palladium catalyst recyclability of the reaction make this approach a general, efficient, and economical method for the construction of valuable dibenzoxazepinone derivatives.

Hydrolytic nanozymes: Preparation, properties, and applications

Hydrolytic nanozymes, as promising alternatives to hydrolytic enzymes, can efficiently catalyze the hydrolysis reactions and overcome the operating window limitations of natural enzymes. Moreover, they exhibit several merits such as relatively low cost, easier recovery and reuse, improved operating stability, and adjustable catalytic properties. Consequently, they have found relevance in practical applications such as organic synthesis, chemical weapon degradation, and biosensing. In this review, we highlight recent works addressing the broad topic of the development of hydrolytic nanozymes. We review the preparation, properties, and applications of six types of hydrolytic nanozymes, including AuNP-based nanozymes, polymeric nanozymes, surfactant assemblies, peptide assemblies, metal and metal oxide nanoparticles, and MOFs. Last, we discuss the remaining challenges and future directions. This review will stimulate the development and application of hydrolytic nanozymes.

Mechanistic Insights into the Appel Reaction Mediated by a Poly-Phosphamide Material as a Heterogeneous Catalyst

Due to notable thermochemical stability, polyphosphamides are often regarded as flame retardants, while molecular phosphamides can serve as versatile Lewis base to catalyze diverse organic transformations. Being chemically analogous to phosphine oxide, phosphamide can also be considered as a mediator for the phosphine-mediated reaction. Herein, an amorphous polymeric material consisting of phosphamide (-NH-P(O)) in the repeating unit (POP) has been prepared via condensation of tris(2-aminoethyl)amine (TREN) and phenyl phosphinic dichloride (PPDC). The POP is isolated as a metal-free and pure organic material which is made of a strong covalent bond and the phosphamide unit is deployed in the organic framework. The presence of phosphamide in the repeating unit of the isolated amorphous POP material can be confirmed by 31P CPMAS NMR, FTIR, and Raman studies. The core-level N 2p and P 2p X-ray photoelectron spectra are in accordance with the presence of tertiary amine nitrogen attached to carbon and secondary amine nitrogen attached to phosphorus. Elemental analyses have depicted approximately 19.7% of phosphorus content in the material, which is being utilized to study the catalytic Appel reaction with 76% conversion of alcohol to a corresponding halide and TON of 462. Quasi in situ Raman study has identified that amino phosphine formed via in situ reduction of the phosphamide unit of the POP catalyzes the halogenation of primary and secondary alcohols with wide substrate scope and functional group tolerance. Kinetic studies have established a first-order dependence with respect to alcohol, while deuterium labeling experiments emphasize that the deprotonation of alcohol is the rate-limiting step. High thermal stability of the material, scope of easy catalyst recyclability, and a cumulative TON of 1386 have led the POP as an emerging pure organic material to be explored further for other phosphine-mediated organocatalysis.

Practical Synthesis of Dendritic Hyperbranched Polyacrylates and Their Topological Block Polymers by Organotellurium-Mediated Emulsion Polymerization in Water

The practical synthesis of structurally controlled hyperbranched polymers (HBPs) by organotellurium-mediated radical polymerization (TERP) in water under emulsion conditions is reported. Copolymerization of vinyltelluride named evolmer, which induces controlled branch structure, and acrylates with TERP chain transfer agent (CTA) in water afforded HBPs having dendron structure. The molecular weight, dispersity, branch number, and branch length of the HBPs were controlled by changing the amount of CTA, evolmer, and acrylate monomers. HB-poly(butyl acrylate)s (HBPBAs) with up to the 8th generation having an average of 255 branches were successfully synthesized. As the monomer conversion reached nearly quantitative and the obtained polymer particles were well dispersed in water, the method is highly suitable for synthesizing topological block polymers, block polymers consisting of different topologies. Thus, linear-block-HB, HB-block-linear, and HB-block-HB-PBAs with the controlled structure were successfully synthesized by adding the second monomer(s) to the macro-CTA. The intrinsic viscosity of the resulting homo- and topological block PBAs was systematically controlled by the degree of the branch, the branch length, and the topology. Therefore, the method opens the possibility of obtaining various HBPs with diverse branch structures and tuning the polymer properties by the polymer topology.

Shape-Persistent Dendrimers

Dendrimers have a diverse and versatile morphology, frequently consisting of core, linking, and peripheral moieties. Dendrimers with flexible linkers, such as PAMAM, cannot retain the persistent shape of molecules, and this has been widely explored and reviewed previously; nevertheless, dendrimers with stiff linkers can preserve the persistent shape of the dendrimers, which has been reported considerably less. This review thus focuses on addressing shape-persistent dendrimers with rigid linking moieties discovered in recent years, i.e., from 2012 to 2023. Shape-persistent dendrimers with an interstitial gap between the dendritic frames in the solid state may or may not let the intramolecular void space be accessible for guest molecules, which largely depends on whether their peripheral groups are flexible or non-flexible. In this paper, eight articles on shape-persistent dendrimers with a flexible alkyl periphery, which may exhibit mesogenic phases upon thermal treatment, and eight articles on shape-persistent dendrimers with a non-flexible periphery, which may allow external ions, gases, or volatile organic compounds to access the interstitial gaps between dendritic frames, are reviewed.

Screening Libraries to Discover Molecular Design Principles for the Targeted Delivery of mRNA with One-Component Ionizable Amphiphilic Janus Dendrimers Derived from Plant Phenolic Acids

Viral and synthetic vectors to deliver nucleic acids were key to the rapid development of extraordinarily efficient COVID-19 vaccines. The four-component lipid nanoparticles (LNPs), containing phospholipids, PEG-conjugated lipids, cholesterol, and ionizable lipids, co-assembled with mRNA via a microfluidic technology, are the leading nonviral delivery vector used by BioNTech/Pfizer and Moderna to access COVID-19 mRNA vaccines. LNPs exhibit a statistical distribution of their four components when delivering mRNA. Here, we report a methodology that involves screening libraries to discover the molecular design principles required to realize organ-targeted mRNA delivery and mediate activity with a one-component ionizable multifunctional amphiphilic Janus dendrimer (IAJD) derived from plant phenolic acids. IAJDs co-assemble with mRNA into monodisperse dendrimersome nanoparticles (DNPs) with predictable dimensions, via the simple injection of their ethanol solution in a buffer. The precise location of the functional groups in one-component IAJDs demonstrated that the targeted organs, including the liver, spleen, lymph nodes, and lung, are selected based on the hydrophilic region, while activity is associated with the hydrophobic domain of IAJDs. These principles, and a mechanistic hypothesis to explain activity, simplify the synthesis of IAJDs, the assembly of DNPs, handling, and storage of vaccines, and reduce price, despite employing renewable plant starting materials. Using simple molecular design principles will lead to increased accessibility to a large diversity of mRNA-based vaccines and nanotherapeutics.

Stimuli-Responsive Principles of Supramolecular Organizations Emerging from Self-Assembling and Self-Organizable Dendrons, Dendrimers, and Dendronized Polymers

All activities of our daily life, of the nature surrounding us and of the entire society and its complex economic and political systems are affected by stimuli. Therefore, understanding stimuli-responsive principles in nature, biology, society, and in complex synthetic systems is fundamental to natural and life sciences. This invited Perspective attempts to organize, to the best of our knowledge, for the first time the stimuli-responsive principles of supramolecular organizations emerging from self-assembling and self-organizable dendrons, dendrimers, and dendronized polymers. Definitions of stimulus and stimuli from different fields of science are first discussed. Subsequently, we decided that supramolecular organizations of self-assembling and self-organizable dendrons, dendrimers, and dendronized polymers may fit best in the definition of stimuli from biology. After a brief historical introduction to the discovery and development of conventional and self-assembling and self-organizable dendrons, dendrimers, and dendronized polymers, a classification of stimuli-responsible principles as internal- and external-stimuli was made. Due to the enormous amount of literature on conventional dendrons, dendrimers, and dendronized polymers as well as on their self-assembling and self-organizable systems we decided to discuss stimuli-responsive principles only with examples from our laboratory. We apologize to all contributors to dendrimers and to the readers of this Perspective for this space-limited decision. Even after this decision, restrictions to a limited number of examples were required. In spite of this, we expect that this Perspective will provide a new way of thinking about stimuli in all fields of self-organized complex soft matter.

Dendritic Polymers in Tissue Engineering: Contributions of PAMAM, PPI PEG and PEI to Injury Restoration and Bioactive Scaffold Evolution

The capability of radially polymerized bio-dendrimers and hyperbranched polymers for medical applications is well established. Perhaps the most important implementations are those that involve interactions with the regenerative mechanisms of cells. In general, they are non-toxic or exhibit very low toxicity. Thus, they allow unhindered and, in many cases, faster cell proliferation, a property that renders them ideal materials for tissue engineering scaffolds. Their resemblance to proteins permits the synthesis of derivatives that mimic collagen and elastin or are capable of biomimetic hydroxy apatite production. Due to their distinctive architecture (core, internal branches, terminal groups), dendritic polymers may play many roles. The internal cavities may host cell differentiation genes and antimicrobial protection drugs. Suitable terminal groups may modify the surface chemistry of cells and modulate the external membrane charge promoting cell adhesion and tissue assembly. They may also induce polymer cross-linking for healing implementation in the eyes, skin, and internal organ wounds. The review highlights all the different categories of hard and soft tissues that may be remediated with their contribution. The reader will also be exposed to the incorporation of methods for establishment of biomaterials, functionalization strategies, and the synthetic paths for organizing assemblies from biocompatible building blocks and natural metabolites.

Preparation of New Glycerol-Based Dendrimers and Studies on Their Behavior toward Essential Oil Encapsulation

Two new families of glycerol-based dendrimers (glyceroladendrimers (GADs) and glyceroclickdendrimers (GCDs)) have been synthesized. Three generations have been isolated for each family with good yields and were fully analyzed. The encapsulation of essential oils (citronella and cinnamon) in GADs, GCDs, and also in previously described glycerodendrimers GD-PAMAMs and GD-PPIs has been studied by dynamic-headspace gas chromatography coupled to mass spectrometry. The retention rates obtained were from -35.8 to 26.65% for citronella essential oil and from 2.14 to 38.84% for the cinnamon essential oil. In addition, the best results were obtained with GD-PAMAMs and GD-PPIs of higher generation. The interaction study between essential oils or more precisely their major components have been performed through NMR spectroscopy (¹H NMR and DOSY NMR). No direct interactions between dendrimers and essential oils have been observed, but a surprising behavior of compression of the dendrimer in stable emulsions was observed. Indeed, the hydrodynamic radius of GD-PPI-3 has been reduced in the presence of cinnamon essential oil.

A Review: Adsorption and Removal of Heavy Metals Based on Polyamide-amines Composites

In recent years, the problem of heavy metal pollution has become increasingly prominent, so it is urgent to develop new heavy metal adsorption materials. Compared with many adsorbents, the polyamide-amine dendrimers (PAMAMs) have attracted extensive attention of researchers due to its advantages of macro-molecular cavity, abundant surface functional groups, non-toxicity, high efficiency and easy modification. But in fact, it is not very suitable as an adsorbent because of its solubility and difficulty in separation, which also limits its application in environmental remediation. Therefore, in order to make up for the shortcomings of this material to a certain extent, the synthesis and development of polymer composite materials based on PAMAMs are increasingly prominent in the direction of solving heavy metal pollution. In this paper, the application of composites based on PAMAMs and inorganic or organic components in the adsorption of heavy metal ions is reviewed. Finally, the prospects and challenges of PAMAMs composites for removal of heavy metal ions in water environment are discussed.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Molecular bases for temperature sensitivity in supramolecular assemblies and their applications as thermoresponsive soft materials

Thermoresponsive supramolecular assemblies have been extensively explored in diverse formats, from injectable hydrogels to nanoscale carriers, for a variety of applications including drug delivery, tissue engineering and thermo-controlled catalysis. Understanding the molecular bases behind thermal sensitivity of materials is fundamentally important for the rational design of assemblies with optimal combination of properties and predictable tunability for specific applications. In this review, we summarize the recent advances in this area with a specific focus on the parameters and factors that influence thermoresponsive properties of soft materials. We summarize and analyze the effects of structures and architectures of molecules, hydrophilic and lipophilic balance, concentration, components and external additives upon the thermoresponsiveness of the corresponding molecular assemblies.

Recent advances in the asymmetric reduction of imines by recycled catalyst systems

Recent advances relating to the asymmetric reduction of imines to afford optically active amines via recyclable catalyst systems are reviewed.

UV-absorbing benzamide-based dendrimer precursors: synthesis, theoretical calculation, and spectroscopic characterization

Janus (J) and Twin (T) benzamide-based branched structures were synthesized and characterized using theoretical and spectroscopic methods.

The advanced synthetic modifications and applications of multifunctional PAMAM dendritic composites

The profound advances in dendrimer chemistry have led to new horizons in polymer science.

Dendritic polyphenylene AIEgens: fluorescence detection of explosives and stimulus-responsive luminescence

Dendritic AIEgens with polyphenylene peripherals and TPE luminescent core had shown detection capability to picric acid and tunable response to external stimulus.

Thiol-Ene Click-Inspired Late-Stage Modification of Long-Chain Polyurethane Dendrimers

The construction of well-defined polyurethane dendrimers is challenging due to the high reactivity of externally added or in situ formed isocyanates leading to the formation of side products. With a primary focus of dendrimer research being the interaction of the periphery and the core, we report the synthesis of a common polyurethane dendron, which allows for the late-stage variation of both the periphery and the core. The periphery can be varied simply by installing a clickable unit in the dendron and then attaching to the core and vice-versa. Thus, a common dendron allows for varying periphery and core in the final two steps. To accomplish this, a protecting group-free, one-pot multicomponent Curtius reaction was utilized to afford a robust and versatile AB2 type polyurethane dendron employing commercially available simple molecules: 5-hydroxyisophthalic acid, 11-bromoundecanol, and 4-penten-1-ol. Subsequent late-stage modifications of either dendrons or dendrimers via a thiol-ene click reaction gave surface-functionalized alternating aromatic-aliphatic polyurethane homodendrimers to generation-three (G3). The dendrons and the dendrimers were characterized by NMR, mass spectrometry, and FT-IR analysis. A bifunctional AB2 type dendritic monomer demonstrated this approach’s versatility that can either undergo a thiol-ene click or attachment to the core. This approach enables the incorporation of functionalities at the periphery and the core that may not withstand the dendrimer growth for the synthesis of polyurethane dendrimers and other dendritic macromolecules.

Unique Functions and Applications of Rigid Dendrimers Featuring Radial Aromatic Chains

Dendrimers, which are highly branched polymers and regarded as huge single molecules, are interesting substances from the aspect of not only polymer chemistry but also molecular chemistry. Various applications in materials science and life science have been investigated by taking advantage of the radially layered structures and intramolecular nanospaces of dendrimers. Most dendrimers have flexible structures that originate from their organic chains which contain many sp³-type atoms, while relatively rigid dendrimers composed only of sp²-type atoms have rarely been reported. It has been recently clarified that such rigid dendrimers exhibit a specific aromatic property not found in other materials. Dendritic phenylazomethines (DPAs), as one of the rigid dendrimers, have only sp²-type C and N atoms and possess a radially branched π-conjugation system in their own macromolecular chains. Such geometric and electronic structures heighten the electron density at the core of the dendrimer and induce an intramolecular potential gradient, which affords unique reactivities that lead to extraordinary functions. This unique property of the rigid dendrimers can be regarded as a new atypical electronic state based on radial aromatic chains not found in conventional aromatic compounds containing spherical aromaticity, Möbius aromaticity, metal aromaticity, and conductive polymers. Therefore, this as-yet-unknown characteristic is expected to contribute to the further development of fundamental and materials chemistry.In this Account, we highlight the rigid DPA dendrimers and their peculiar atomically precise and selective assembly behaviors that originate from the radial aromatic chains. One of the most noteworthy attainments based on the radial aromatic chains is the precise synthesis of a multimetallic multinuclear complex of a dendrimer containing a total of 13 elements. Next, we describe the electrochemical and catalytic functionalization of such multinuclear dendrimer complexes and the construction of supramolecular nanoarchitectures by the polymerization of DPAs. These complexes exhibit encapsulation-release switching of guests and additive-free catalytic ability similar to proteins and enzymes. Such selective and accurate control of the intramolecular assembly of guests and the intermolecular arrangement of hosts realized by the radial aromatic chains of dendrimers will enable supramolecular chemistry and biochemistry to be linked from a new aspect. In addition, the multimetallic multinuclear complexes of dendrimers afford a novel approach to precisely synthesize sub-nanoparticles with ultrasmall particle sizes (1 nm) that have been technically difficult to obtain by conventional nanotechnology. We discuss the method for the synthesis of these sub-nanoparticles with well-controlled atomicity and composition using DPA complexes as a template and recent advances to reveal their specific physical and chemical properties. These results suggest that the unique electronic states induced in such radial aromatics could play an important role in the development of next-generation chemistry.

Porosity of Rigid Dendrimers in Bulk: Interdendrimer Interactions and Functionality as Key Factors

The porous structure of second- and third-generation polyphenylene-type dendrimers was investigated by adsorption of N₂, Ar, and CO₂ gases, scanning electron microscopy and small-angle X-ray spectroscopy. Rigid dendrimers in bulk are microporous and demonstrate a molecular sieve effect. When using CO₂ as an adsorbate gas, the pore size varies from 0.6 to 0.9 nm. This is most likely due to the distances between dendrimer macromolecules or branches of neighboring dendrimers, whose packing is mostly realized due to intermolecular interactions, in particular, π-π interactions of aromatic fragments. Intermolecular interactions prevent the manifestation of the porosity potential inherent to the molecular 3D structure of third-generation dendrimers, while for the second generation, much higher porosity is observed. The maximum specific surface area for the second-generation dendrimers was 467 m²/g when measured by CO₂ adsorption, indicating that shorter branches of these dendrimers do not provide dense packing. This implies that the possible universal method to create porous materials for all kinds of rigid dendrimers is by a placement of bulky substituents in their outer layer.

Advanced nanomedicine approaches applied for treatment of skin carcinoma

Skin-cancer is the commonest malignancy affecting huge proportion of the population, reaching heights in terms of morbidity. The treatment strategies are presently focusing on surgery, radiation and chemotherapy, which eventually cause destruction to unaffected cells. To overcome this limitation, wide range of nanoscaled materials have been recognized as potential carriers for delivering selective response to cancerous cells and neoplasms. Nanotechnological approach has been tremendously exploited in several areas, owing to their functional nanometric dimensions. The alarming incidence of skin cancer engenders burdensome effects worldwide, which is further awakening innovational medicinal approaches, accompanying target specific drug delivery tools for coveted benefits to provide reduced toxicity and tackle proliferative episodes of skin cancer. The developed nanosystems for anti-cancer agents include liposomes, ethosomes, nanofibers, solid lipid nanoparticles and metallic nanoparticles, which exhibit pronounced outcomes for skin carcinoma. In this review, skin cancer with its sub-types is explained in nutshell, followed by compendium of specific nanotechnological tools presented, in addition to therapeutic applications of drug-loaded nano systems for skin cancer.

Unconventional Approaches to Prepare Triazine-Based Liquid Crystal Dendrimers

Most triazine-based liquid crystalline (LC) dendrimers reported thus far are the main-chain LC macromolecules with long flexible chains at their periphery and attached to internal rigid or semi-rigid frameworks. Their formation of mesogenic phases often depends on the intermolecular face-to-face π-π interactions between dendritic molecules, which are unusual. Their mesogenic phases can also be formed by incorporation of mesogenic units to the dendritic skeletons through long flexible chains, as most side-chain LC dendrimers, in which the peripheral mesogenic units generally play the important roles. For main-chain triazine-based dendrimers, their morphology is maintained by restricted freedom of rigid or semi-rigid connecting units, and their formations of LC phases are therefore not straightforward to be controlled. In this review, we thus describe modulating of the intermolecular face-to-face π-π interactions between the triazine-based dendritic molecules, with the aim of forming LC phases through molecular design.

Metal Oxide-Related Dendritic Structures: Self-Assembly and Applications for Sensor, Catalysis, Energy Conversion and Beyond

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.

Effect of chlorhexidine-loaded poly(amido amine) dendrimer on matrix metalloproteinase activities and remineralization in etched human dentin in vitro

To investigate the effect of chlorhexidine (CHX)-loaded carboxyl-terminated poly (amido amine) dendrimer (CHX-PAMAM-COOH) on matrix metalloproteinase (MMP) activities and remineralization in human dentin, CHX-PAMAM-COOH was prepared and characterized by Fourier-transform infrared spectroscopy. The inhibitory effects of CHX, PAMAM-COOH, and CHX-PAMAM-COOH on soluble recombinant human matrix metalloproteinase (rhMMP-2) and dentin-bound endogenous MMP activity were measured using an MMP Activity Assay Kit. In situ zymography was performed to evaluate the gelatinase activity in dentin pretreated with CHX, PAMAM-COOH, and CHX-PAMAM-COOH. The remineralization of etched dentin pretreated with CHX, PAMAM-COOH, and CHX-PAMAM-COOH was evaluated by field emission-scanning electron microscopy (SEM) and energy disperse spectroscopy (EDS) after incubation in artificial saliva for 14 days. The results of the rhMMP-2 activity assay showed that the MMP-2 activity in the CHX-PAMAM-COOH group and the CHX group decreased significantly to 5.58 ± 0.85% (P < 0.05) and 4.86 ± 1.12% (P < 0.05), respectively, but that in the PAMAM-COOH group increased significantly to 213.38 ± 0.11% (P < 0.05). The results of total MMP activity and in situ zymography showed a significant reduction in endogenous gelatinase activity in dentin in the CHX-PAMAM-COOH group and the CHX group. The SEM and EDS results showed that rod-like crystals were formed on the etched dentin surface in the PAMAM-COOH group and the CHX-PAMAM-COOH group, and their Ca/P ratios were 1.73 and 1.71, respectively. In conclusion, CHX-PAMAM-COOH can inhibit dentin-bound endogenous MMPs and induce remineralization in etched dentin simultaneously. However, it is important to note that the catalytic role of PAMAM dendrimers may have an undesired excitatory effect on MMP activity, which cannot be ignored if PAMAM dendrimers were used alone in the oral environment.

A Model for Late-Stage Modification of Polyurethane Dendrimers Using Thiol-Ene Click Chemistry

Dendritic materials possessing urethane linkage are surprisingly more stable than similar structures having functional groups such as ether, ester, amide, or carbosilane. This generates profound interest in dendritic polyurethanes. Construction of a well-defined polyurethane dendrimer is, however, challenging because of isocyanates' high reactivity. As a model of our ongoing dendrimer-research, herein, we report a protecting group-free one-pot multicomponent Curtius reaction to furnish a robust and versatile AB2-type dendron, which ensures late-stage modification of both the dendron and dendritic macromolecule yielding a surface functionalized polyurethane dendrimer. While 5-hydroxyisophthalic acid, 11-bromoundecanol, and 4-penten-1-ol were utilized in the construction of the dendron, thiol-ene click chemistry was employed for the late-stage modification. Novel dendrons and dendrimers synthesized were characterized by NMR (1D and 2D) and high-resolution MALDI-TOF analysis. This strategy allows an easy late-stage modification of dendritic macromolecules and is highly useful in the synthesis of both symmetrical and unsymmetrical dendrimers (Janus dendrimers).

Using a Modified Polyamidoamine Fluorescent Dendrimer for Capturing Environment Polluting Metal Ions Zn2+, Cd2+, and Hg2+: Synthesis and Characterizations

One of the most pressing global concerns is how to provide a clean environment for future generations given the exacerbation of urban, agricultural, industrial, and economic activities due to the escalating size of the global population. A polyamidoamine (PAMAM) dendrimer peripherally modified with 4-N,N′-dimethylethylenediamine-1,8-naphthalmide as a chromophore was synthesized and utilized to capture hazardous heavy metal ions. This modified fluorescent dendrimer (FCD) was complexed with Group 12 metal ions (Zn2+, Cd2+, and Hg2+) at a 2:1 (metal: FCD) ratio. Electronic absorption, fluorescence emission, Infra-red (IR), and nuclear magnetic resonance (1H NMR) spectroscopies, conductivity, CHN elemental, thermogravimetry, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) analyses were used to characterize the resulting metal complexes. These assays revealed that the synthesized complexes were yellow-colored, thermally stable, nanoscale-sized, and composed of [M2FCD]·4Cl2. Considerable spectral shifts were observed in the emission and absorption spectra of the FCD molecule after binding the Zn2+ ions, which can be used to differentiate the Zn2+ complex from the other two complexes. This work provides basic data to facilitate the detection, quantification, and removal of environmentally hazardous heavy metal ions through complexation with a fluorescent dendrimer.

Synthesis of ultrafine AuPd bimetallic nanoparticles using a magnetite-cored poly(propyleneimine) dendrimer template and its sustainable catalysis of the Suzuki coupling reaction

A rational synthesis of magnetically recyclable PPI dendrimer encapsulated AuPd bimetallic nanoparticle and its catalytic examination in the Suzuki coupling reaction.

Sustainability in Ru- and Pd-based catalytic systems using N-heterocyclic carbenes as ligands

This review is a critical presentation of catalysts based on palladium and ruthenium bearing N-heterocyclic carbene ligands that have enabled a more sustainable approach to catalysis and to catalyst uses.

Dendrons and Dendritic Terpolymers: Synthesis, Characterization and Self-Assembly Comparison

To the best of our knowledge, this is the very first time that a thorough study of the synthetic procedures, molecular and thermal characterization, followed by structure/properties relationship for symmetric and non-symmetric second generation (2-G) dendritic terpolymers is reported. Actually, the synthesis of the non-symmetric materials is reported for the first time in the literature. Anionic polymerization enables the synthesis of well-defined polymers that, despite the architecture complexity, absolute control over the average molecular weight, as well as block composition, is achieved. The dendritic type macromolecular architecture affects the microphase separation, because different morphologies are obtained, which do not exhibit long range order, and various defects or dislocations are evident attributed to the increased number of junction points of the final material despite the satisfactory thermal annealing at temperatures above the highest glass transition temperature of all blocks. For comparison reasons, the initial dendrons (miktoarm star terpolymer precursors) which are connected to each other in order to synthesize the final dendritic terpolymers are characterized in solution and in bulk and their self-assembly is also studied. A major conclusion is that specific structures are adopted which depend on the type of the core connection between the ligand and the active sites of the dendrons.

An Iterative Divergent Approach to Conjugated Starburst Borane Dendrimers

Using a new divergent approach, conjugated triarylborane dendrimers were synthesized up to the 2nd generation. The synthetic strategy consists of three steps: 1) functionalization, via iridium catalyzed C-H borylation; 2) activation, via fluorination of the generated boronate ester with K[HF2 ] or [N(nBu4 )][HF2 ]; and 3) expansion, via reaction of the trifluoroborate salts with aryl Grignard reagents. The concept was also shown to be viable for a convergent approach. All but one of the conjugated borane dendrimers exhibit multiple, distinct and reversible reduction potentials, making them potentially interesting materials for applications in molecular accumulators. Based on their photophysical properties, the 1st generation dendrimers exhibit good conjugation over the whole system. However, the conjugation does not increase further upon expansion to the 2nd generation, but the molar extinction coefficients increase linearly with the number of triarylborane subunits, suggesting a potential application as photonic antennas.