Synthesis, structure, and bonding in polyiodide and metal iodide-iodine systems

Anion⋯anion self-assembly under the control of σ- and π-hole bonds

The electrostatic attraction between charges of opposite signs and the repulsion between charges of the same sign are ubiquitous and influential phenomena in recognition and self-assembly processes. However, it has been recently revealed that specific attractive forces between ions with the same sign are relatively common. These forces can be strong enough to overcome the Coulomb repulsion between ions with the same sign, leading to the formation of stable anion⋯anion and cation⋯cation adducts. Hydroden bonds (HBs) are probably the best-known interaction that can effectively direct these counterintuitive assembly processes. In this review we discuss how σ-hole and π-hole bonds can break the paradigm of electrostatic repulsion between like-charges and effectively drive the self-assembly of anions into discrete as well as one-, two-, or three-dimensional adducts. σ-Hole and π-hole bonds are the attractive forces between regions of excess electron density in molecular entities (e.g., lone pairs or π bond orbitals) and regions of depleted electron density that are localized at the outer surface of bonded atoms opposite to the σ covalent bonds formed by atoms (σ-holes) and above and below the planar portions of molecular entities (π-holes). σ- and π-holes can be present on many different elements of the p and d block of the periodic table and the self-assembly processes driven by their presence can thus involve a wide diversity of mono- and di-anions. The formed homomeric and heteromeric adducts are typically stable in the solid phase and in polar solvents but metastable or unstable in the gas phase. The pivotal role of σ- and π-hole bonds in controlling anion⋯anion self-assembly is described in key biopharmacological systems and in molecular materials endowed with useful functional properties.

Formation of extended polyiodides at large cation templates

By studying the structures of (μ-1,4,10,13-tetrathia-7,16-diazacyclooctadecane)bis[iodidopalladium(II)] diiodide penta(diiodine), [Pd2I2(C12H26N2S4)](I)2·5I2 or [Pd2I2([18]aneN2S4)](I)2·(I2)5, and 4,7,13,16,21,24-hexaoxa-1,10-diazoniabicyclo[8.8.8]hexacosane triiodide iodide hemipenta(diiodine) dichloromethane monosolvate, C18H38N2O62+·I3-·I-·2.5I2·CH2Cl2 or [H2([2.2.2]cryptand)](I3)(I)(I2)2.5·CH2Cl2, we confirm the structural variety of extended polyiodides achievable upon changing the shape, charge and dimensions of the cation template, by altering the synthetic strategy adopted and/or the experimental conditions. Although it is still often difficult to characterize discrete [I2m+n]n- polyiodides higher than I3- on the basis of structural parameters, such as I-I bond distances, FT-Raman spectroscopy appears to identify them as aggregates of I2, I- and (symmetric or slightly asymmetric) I3- building blocks linked by I...I interactions of varying strengths. However, because FT-Raman spectroscopy carries no information about the topological features of extended polyiodides, the two techniques should therefore be applied in combination to enhance the analysis of this kind of compounds.

Electron-Deficient Multicenter Bonding in Phase Change Materials: A Chance for Reconciliation

In the last few years, a controversy has been raised regarding the nature of the chemical bonding present in phase change materials (PCMs), many of which are minerals such as galena (PbS), clausthalite (PbSe), and altaite (PbTe). Two opposite bonding models have claimed to be able to explain the extraordinary properties of PCMs in the last decade: the hypervalent (electron-rich multicenter) bonding model and the metavalent (electron-deficient) bonding model. In this context, a third bonding model, the electron-deficient multicenter bonding model, has been recently added. In this work, we comment on the pros and cons of the hypervalent and metavalent bonding models and briefly review the three approaches. We suggest that both hypervalent and metavalent bonding models can be reconciled with the third way, which considers that PCMs are governed by electron-deficient multicenter bonds. To help supporters of the metavalent and hypervalent bonding model to change their minds, we have commented on the chemical bonding in GeSe and SnSe under pressure and in several polyiodides with different sizes and geometries.

Recent advances in atomic cluster synthesis: a perspective from chemical elements

Despite its potential significance, "cluster chemistry" remains a somewhat marginalized topic within the chemistry field. However, atomic clusters with their unusual and unique structures and properties represent a novel material group situated between molecules and nanoparticles or solid matter, judging from both scientific standpoints and historical backgrounds. Surveying an entire material group, including all substances that can be regarded as a cluster, is essential for establishing cluster chemistry as a more prominent chemistry field. This review aims to provide a comprehensive understanding by categorizing, summarizing, and reviewing clusters, focusing on their constituent elements in the periodic table. However, because numerous disparate synthetic processes have been individually developed to date, their straightforward and uniform classification is a challenging task. As such, comprehensively reviewing this field from a chemical composition viewpoint presents significant obstacles. It should be therefore noted that despite adopting a synthetic method-based classification in this review, the discussions presented herein could entail inaccuracies. Nevertheless, this unorthodox viewpoint unfolds a new scientific perspective which accentuates the common ground between different development processes by emphasizing the lack of a definitive border between their synthetic methods and material groups, thus opening new avenues for cementing cluster chemistry as an attractive chemistry field.

Mobile iodides capture for highly photolysis- and reverse-bias-stable perovskite solar cells

For halide perovskites that are susceptible to photolysis and ion migration, iodide-related defects, such as iodine (I2) and iodine vacancies, are inevitable. Even a small number of these defects can trigger self-accelerating chemical reactions, posing serious challenges to the durability of perovskite solar cells. Fortunately, before I2 can damage the perovskites under illumination, they generally diffuse over a long distance. Therefore, detrimental I2 can be captured by interfacial materials with strong iodide/polyiodide (Ix-) affinities, such as fullerenes and perfluorodecyl iodide. However, fullerenes in direct contact with perovskites fail to confine Ix- ions within the perovskite layer but cause detrimental iodine vacancies. Perfluorodecyl iodide, with its directional Ix- affinity through halogen bonding, can both capture and confine Ix-. Therefore, inverted perovskite solar cells with over 10 times improved ultraviolet irradiation and thermal-light stabilities (under 85 °C and 1 sun illumination), and 1,000 times improved reverse-bias stability (under ISOS-V ageing tests) have been developed.

Porous Aromatic Frameworks Enabling Polyiodide Confinement toward High Capacity and Long Lifespan Zinc-Iodine Batteries

Aqueous zinc-iodine batteries (AZIBs) are attracting increasing attention because of their high safety and abundance of resources. However, the performance of AZIBs is compromised by inadequate confinement of soluble polyiodides, the undesired shuttle effect, and slow reaction kinetics. In this study, a porous aromatic framework (PAF) with abundant benzene motifs and a well-organized pore structure is adopted as the iodine host, which exhibits high iodine adsorption capacity and robust polyiodide confinement. Both experimental characterizations and theoretical simulations indicate that the interactions between iodine species and the PAF-1 facilitate the redox reaction by coupling the electronic structures of the active species in the framework. A comparison of PAF-1, PAF-5, and PAF-11 also emphasizes the structural advantages of the high surface area and interconnected three-dimensional channels of PAF-1. Consequently, the I2@PAF-1 cathode can deliver a high capacity of 328 mAh g-1 at 0.5 C, outstanding rate performance, and a stable cycling life of 20 000 cycles (86 % retention at 10 C). The robust polyiodide confinement and superb electrochemical performance of Zn-I2@PAF-1 provide insights into the practical application of PAFs as excellent electrode materials for AZIBs.

Stability of Iodine Species Trapped in Titanium-Based MOFs: MIL-125 and MIL-125_NH2

Two titanium-based MOFs MIL-125 and MIL-125_NH2 are synthesized and characterized using high-temperature powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N2 sorption, Fourier transformed infrared spectroscopy (FTIR), Raman spectroscopy, ultraviolet-visible spectroscopy (UV-Vis), and electron paramagnetic resonance (EPR). Stable up to 300 °C, both compounds exhibited similar specific surface areas (SSA) values (1207 and 1099 m2 g-1 for MIL-125 and MIL-125_NH2, respectively). EPR signals of Ti3+ are observed in both, whith MIL-125_NH2 also showing ─NH2 ●+ signatures. Both MOFs efficiently adsorbed iodine in continuous gas flow over five days, with MIL-125 trapping 1.9 g.g-1 and MIL-125_NH2 trapping 1.6 g.g-1. MIL-125_NH2 exhibited faster adsorption kinetics due to its smaller band gap (2.5 against 3.6 eV). In situ Raman spectroscopy conducted during iodine adsorption revealed signal evolution from "free" I2 to "perturbed" I2, and I3 -. TGA and in situ Raman desorption experiments showed that ─NH2 groups improved the stabilization of I3 - due to an electrostatic interaction with NH2 ●+BDC radicals. The Albery model indicated longer lifetimes for iodine desorption in I2@MIL-125_NH2, attributed to a rate-limiting step due to stronger interaction between the anionic iodine species and the ─NH2 ●+ radicals. This study underscores how MOFs with efficient charge separation and hole-stabilizer functional groups enhance iodine stability at higher temperatures.

Ionic Polyimine-Based Composite Membrane with Inductive and Complexation Synergistic Effects for Sensitive and On-Site Fluorescent Detection of Volatile Iodine

Along with the development of nuclear power, concerns about radioactive emissions and the potential for nuclear leakage have been widely raised, particularly of harmful iodine isotopes. However, as a significant component of nuclear air waste, the enrichment and detection of air-dispersed gaseous iodine remain a challenge. In this work, it is focused on developing an attraction-immobilization-detection strategy-based fluorescence method for the on-site detection of volatile iodine, by employing a photoluminescent ionic polyimine network-polyvinylpyrrolidone (IPIN-PVP) composite membrane. This strategy synergizes ion-induced dipole interactions from IPIN and complexation effects from PVP, allowing effective iodine enrichment and immobilization. As a result, the optimized IPIN-PVP membrane exhibits rapid response times of 5 s and a low detection limit of 4.087 × 10-8 m for gaseous iodine. It also introduces a portable handheld detection device that utilizes the composite membrane, offering a practical solution for real-time on-site detection of volatile iodine. This innovation enhances nuclear safety measures and disaster management by providing rapid and reliable iodine detection capabilities.

Evidence for Trans-Oligoene Chain Formation in Graphene Induced by Iodine

Functionalization of pristine graphene by hydrogen and fluorine is well studied, resulting in graphane and fluorographene structures. In contrast, functionalization of pristine graphene with iodine has not been reported. Here, the functionalization of graphene with iodine using photochemical activation is presented, which is thermally reversible at 400 °C. Additional dispersive dominant Raman modes that are probed by resonance Raman spectroscopy are observed. Additionally, iodinated graphene is probed by Kelvin probe force microscopy and by transport measurements showing p-doping surpassing non-covalent iodine doping by charge transfer-complex formation. The emergent Raman modes combined with strong p-doping indicate that iodine functionalization is distinct from simple iodine doping. A reaction mechanism based on these findings is proposed, identifying the large size of iodine atoms as the probable cause governing regiochemically controlled addition due to steric hinderance of reactive sites. The modification of the electronic structure is explained by the confinement of 1D trans-oligoene chains between sp3 -defects. These results demonstrate the uniqueness of iodine reactivity toward graphene and the modification of the electronic structure of iodinated graphene, highlighting its dependence on the spatial arrangement of substituents.

Comparison of N···I and N···O Halogen Bonds in Organoiodine Cocrystals of Heterocyclic Aromatic Diazine Mono-N-oxides

A series of cocrystals of halogen bond donors 1,4-diiodotetrafluorobenzene (p-F4DIB) and tetraiodoethylene (TIE) with five aromatic heterocyclic diazine mono-N-oxides based on pyrazine, tetramethylpyrazine, quinoxaline, phenazine, and pyrimidine as halogen bonding acceptors were studied. Structural analysis of the mono-N-oxides allows comparison of the competitive occurrence of N···I vs O···I interactions and the relative strength and directionality of these two types of interactions. Of the aromatic heterocyclic diazine mono-N-oxide organoiodine cocrystals examined, six exhibited 1:1 stoichiometry, forming chains that utilized both N···I and O···I interactions. Two cocrystals presented 1:1 stoichiometry with exclusive O···I interactions. Two cocrystals displayed a 2:1 stoichiometry-one characterized solely by O···I interactions and the other solely by N···I interactions. We have also compared these interactions to those present in the corresponding diazines, some of which we report here and some which have been previously reported. In addition, a computational analysis using density functional theory (M062X/def2-SVPD) was performed on these two systems and has been compared to the experimental results. The calculated complex formation energies were, on average, 4.7 kJ/mol lower for the I···O halogen bonding interaction as compared to the corresponding N···I interaction. The average I···O interaction distances were calculated to be 0.15 Å shorter than the corresponding I···N interactions.

Pressure stabilization effect on the donor-acceptor polyiodide chains in tetraethylammonium bis(diiodine) triiodide - insights from Raman spectroscopy

Polyiodides present high bonding flexibility already at ambient conditions, and undergo significant pressure-induced structural deformations. Resonant Raman spectroscopy has been widely used to study I-I bonds in various polyiodides, but it carries a risk of photodecomposition due to the high visible-light absorption of iodine. In this study, tetraethylammonium (bis)diiodine triiodide (TEAI) has been investigated by resonant Raman spectroscopy up to 12.02(3) GPa. The effect of pressure on the intensities and positions of Raman bands has been evaluated and correlated with the interatomic I-I distances derived from high-pressure X-ray diffraction experiments. Pressure was shown to effectively stabilize TEAI against laser-induced photodecomposition, even after a long course of irradiation with the resonant laser light. Examination of a freshly exposed crystal surface revealed that TEAI superficially passivates with the layer of lower polyiodides, which prevents further iodine loss, and shows distinct pressure-induced behaviour.

A redox active rod coordination polymer from tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene

An enlarged version of the ubiquitous tetrathiafulvalene-tetrabenzoic acid is described, with 4,4'-biphenyl moieties as spacers between the coordination moieties and the electroactive core. The obtained rectangular ligand has a 14 × 22 Å2 size and is combined with Zn(II) under solvothermal conditions to yield a coordination polymer endowed with large cavities of ca. 15 × 11 Å2/10 × 10 Å2. The topology of the material is discussed in detail using the Points of Extension and Metals (PE&M) or the Straight-rod (STR) representation, and the sqc1121 or tfo topological type of the structure is observed, respectively. Its stability towards solvent removal and electrical properties are discussed. The material does not present any permanent porosity upon desolvation according to nitrogen sorption measurements at 77 K. Nevertheless, a significant increase in conductivity is observed on compressed pellets of the material upon post-synthetic oxidation with iodine. Raman spectroscopy combined with density functional theory (DFT) calculations has been used to characterize the oxidation state of tetrakis(4-carboxylic acid biphenyl)tetrathiafulvalene for coordination polymers.

The paradigm for exceptional iodine capture by nonporous amorphous electron-deficient cyclophanes

Nuclear power emerges as a beacon of hope in tackling the energy crisis. However, the emission of radioactive iodine originating from nuclear waste and accidents poses a serious danger to nature and human well-being. Therefore, it becomes imperative to urgently develop suitable adsorbents capable of iodine capture and long-term storage. It's generally recognized that achieving high iodine capture efficiency necessitates the presence of electron-rich pores/cavities that facilitate charge-transfer (CT) interactions, as well as effective sorption sites capable of engaging in lone pair interactions with iodine. In this study, an unprecedented iodine capture paradigm by nonporous amorphous electron-deficient tetracationic cycloalkanes in vapor and aqueous solutions is revealed, overturning preconceived notions of iodine trapping materials. A newly reported tetracationic cyclophane, BPy-Box4+, exhibited an exceptional iodine vapor sorption capacity of 3.99 g g-1, remarkable iodine removal efficiency in aqueous media, and outstanding reusability. The iodine capture mechanism is unambiguously elucidated by theoretical calculations and the single-crystal structures of cyclophanes with a gradual increase in iodine content, underlining the vital role of host-guest (1:1 or 1:2) interactions for the enhanced iodine capture. The current study demonstrates a new paradigm for enhanced iodine capture by nonporous amorphous electron-deficient cyclophanes through host-guest complexation.

Efficient capture of iodine in steam and water media by hydrogen bond-driven charge transfer complexes

Untreated radioactive iodine (129I and 131I) released from nuclear power plants poses a significant threat to humans and the environment, so the development of materials to capture iodine from water media and steam is critical. Here, we report a charge transfer complex (TCNQ-MA CTC) with abundant nitrogen atoms and π-conjugated system for adsorption of I2 vapor and I3- from aqueous solutions. Due to the synergistic binding mechanism of benzene/triazine rings and N-containing groups with iodine, special I-π and charge transfer interaction can be formed between the guest and the host, and thus efficient removal of I2 and I3- can be realized by TCNQ-MA CTC with the adsorption capacity up to 2.42 g/g and 800 mg/g, respectively. TCNQ-MA CTC can capture 92% of I3- within 2.5 min, showing extremely fast kinetics, excellent selectivity and high affinity (Kd = 5.68 × 106 mL/g). Finally, the TCNQ-MA CTC was successfully applied in the removal of iodine from seawater with the efficiency of 93.71%. This work provides new insights in the construction of charge transfer complexes and lays the foundation for its environmental applications.

Ultralight crystalline hybrid composite material for highly efficient sequestration of radioiodine

Considering the importance of sustainable nuclear energy, effective management of radioactive nuclear waste, such as sequestration of radioiodine has inflicted a significant research attention in recent years. Despite the fact that materials have been reported for the adsorption of iodine, development of effective adsorbent with significantly improved segregation properties for widespread practical applications still remain exceedingly difficult due to lack of proper design strategies. Herein, utilizing unique hybridization synthetic strategy, a composite crystalline aerogel material has been fabricated by covalent stepping of an amino-functionalized stable cationic discrete metal-organic polyhedra with dual-pore containing imine-functionalized covalent organic framework. The ultralight hybrid composite exhibits large surface area with hierarchical macro-micro porosity and multifunctional binding sites, which collectively interact with iodine. The developed nano-adsorbent demonstrate ultrahigh vapor and aqueous-phase iodine adsorption capacities of 9.98 g.g-1 and 4.74 g.g-1, respectively, in static conditions with fast adsorption kinetics, high retention efficiency, reusability and recovery.

Ye Olde supramolecular chemistry, its modern rebranding and overarching trends in chemistry

We can describe current contingency of supramolecular chemistry as "post-halogen bonding", with clear reference to the success of the σ-hole model and the halogen bond concepts. This phase is characterized by a strong push towards a new nomenclature for non-covalent interactions, a group-by-group one focusing on the electrophile. As such nomenclature increasingly meets IUPAC endorsement, its proposers report resistances to such ideas, especially in the inorganic and coordination chemistry communities. The whole issue has been generating considerable debate in the last decade. Herein we fully embrace such discussion in the hope of involving a larger share of the relevant communities. Alternative descriptions are here reevaluated, novel views reconnected with older ones, and it is ultimately questioned whether the introduction of such a nomenclature and its subtending ideas would be beneficial. The themes of appreciation of general trends in chemistry, of counterintuitive interactions, of positioning of novel nomenclature with respect to existing ones, and of the extension of group-by-group naming from main block to d-block elements - as key and currently unresolved issues - are discussed. Equivalent, alternative and arguably more comprehensive descriptions are tentatively given, in the hope to overcome controversies together in the pursuit of higher rewards: a comprehensive shared view of supramolecular forces and a common language to express it.

Bromination of 2D materials

The adsorption, reaction and thermal stability of bromine on Rh(111)-supported hexagonal boron nitride (h-BN) and graphene were investigated. Synchrotron radiation-based high-resolution x-ray photoelectron spectroscopy (XPS) and temperature-programmed XPS allowed us to follow the adsorption process and the thermal evolutionin situon the molecular scale. Onh-BN/Rh(111), bromine adsorbs exclusively in the pores of the nanomesh while we observe no such selectivity for graphene/Rh(111). Upon heating, bromine undergoes an on-surface reaction onh-BN to form polybromides (170-240 K), which subsequently decompose to bromide (240-640 K). The high thermal stability of Br/h-BN/Rh(111) suggests strong/covalent bonding. Bromine on graphene/Rh(111), on the other hand, reveals no distinct reactivity except for intercalation of small amounts of bromine underneath the 2D layer at high temperatures. In both cases, adsorption is reversible upon heating. Our experiments are supported by a comprehensive theoretical study. DFT calculations were used to describe the nature of theh-BN nanomesh and the graphene moiré in detail and to study the adsorption energetics and substrate interaction of bromine. In addition, the adsorption of bromine onh-BN/Rh(111) was simulated by molecular dynamics using a machine-learning force field.

Triiodide-Based Chair-Like Copper Complex Assembled by Halogen Bonding

Cocrystallization of the dimeric [Cu2(μ-I)2(CNXyl)4] (Xyl = 2,6-Me2C6H3, 1) and polymeric catena-[Cu(μ-I)(CNC6H3-2-Cl-6-Me)2] (2) complexes with I2 at different molar ratios between the reactants resulted in a series of (RNC)2CuI-based crystal polyiodides formed along with gradual accumulation of iodine, namely the cocrystals [1·I2]·[Cu(μ1,1-I3)(CNXyl)2]2 followed by the generation of [Cu(μ1,3-I3)(CNXyl)2]2·2I2 (5·2I2) or [Cu(μ1,1-I3)(CNC6H3-2-Cl-6-Me)2]2 and then [Cu(μ1,3-I3)(CNC6H3-2-Cl-6-Me)2]n·n/2I2. The polyiodide 5·2I2 exhibits a novel supramolecular motif─a purely inorganic halogen-bonded Cu2(μ1,3-I3)2 core in the chair conformation. The X-ray structure of 5·2I2 featuring I···I contacts was analyzed by a set of theoretical methods and attributed to moderately strong halogen bonding (from -3.2 to -3.9 kcal/mol); these interactions determine the supramolecular architecture of 5·2I2.

An Experimental and Theoretical Insight into I2 /Br2 Oxidation of Bis(pyridin-2-yl)Diselane and Ditellane

The reactivity between bis(pyridin-2-yl)diselane o Py2 Se2 and ditellane o Py2 Te2 (L1 and L2, respectively; o Py=pyridyn-2-yl) and I2 /Br2 is discussed. Single-crystal structure analysis revealed that the reaction of L1 with I2 yielded [(HL1+ )(I- )⋅5/2I2 ]∞ (1) in which monoprotonated cations HL1+ template a self-assembled infinite pseudo-cubic polyiodide 3D-network, while the reaction with Br2 yielded the dibromide Ho PySeII Br2 (2). The oxidation of L2 with I2 and Br2 yielded the compounds Ho PyTeII I2 (3) and Ho PyTeIV Br4 (6), respectively, whose structures were elucidated by X-ray diffraction analysis. FT-Raman spectroscopy measurements are consistent with a 3c-4e description of all the X-Ch-X three-body systems (Ch=Se, Te; X=Br, I) in compounds 2, 3, Ho PyTeII Br2 (5), and 6. The structural and spectroscopic observations are supported by extensive theoretical calculations carried out at the DFT level that were employed to study the electronic structure of the investigated compounds, the thermodynamic aspects of their formation, and the role of noncovalent σ-hole halogen and chalcogen bonds in the X⋅⋅⋅X, X⋅⋅⋅Ch and Ch⋅⋅⋅Ch interactions evidenced structurally.

Quantum Chemical Similarities of Bonding in Polyiodides and Phase-Change Materials

Covalent chemical bonding beyond the two-center two-electron (2c-2e) bond is well-known for (inter)halogenic compounds, in particular, electron-rich multicenter (or hypervalent) bonding of the three-center four-electron (3c-4e) type to explain both their structure and stability. In the present work, we examine different solid-state polyiodides by combining both local orbital wave function and projected force constant analysis in order to numerically quantify the influence of multicenter (hypervalent) bonding based on periodic density functional theory (DFT) calculations. After linking our findings to established qualitative theories on multicenter bonding, particularly, Alcock's "secondary" bonding, we relate the bonding behavior in polyiodides to industrially relevant phase-change materials of the Ge-Sb-Te class, finding further evidence for the same underlying cause as regards chemical bonding in both material classes.

Establishing Ultralow Self-Discharge Zn-I2 Battery by Optimizing ZnSO4 Electrolyte Concentration

As one of promising candidates for large-scale energy-storage systems, Zn-I2 aqueous battery exhibits multifaceted advantages including low cost, high energy/powder density, and intrinsic operational safety, but also suffers from fast self-discharge and short cycle/shelf lifespan associating with I3 - shuttle, Zn dendrite growth, and corrosion. In this paper, the battery's self-discharge rate is successfully suppressed down to an unprecedent level of 17.1% after an ultralong shelf-time of 1 000 h (i.e., 82.9% capacity retention after 41 days open-circuit storage), by means of manipulating solvation structures of traditional ZnSO4 electrolyte via simply adjusting electrolyte concentration. Better yet, the optimized 2.7 m ZnSO4 electrolyte further prolongs the cycle lifespan of the battery up to >10 000 and 43 000 cycles at current density of 1 and 5 A g-1 , respectively, thanks to the synthetic benefits from reduced free water content, modified solvation structure and lowered I2 dissolution in the electrolyte. With both long lifespan and ultralow self-discharge, this reliable and affordable Zn-I2 battery may provide a feasible alternative to the centuries-old lead-acid battery.

Halogen Bonding and/or Covalent Bond: Analogy of 3c-4e N···I···X (X = Cl, Br, I, and N) Interactions in Neutral, Cationic, and Anionic Complexes

X-ray structural measurements and computational analysis demonstrated the similarity of the geometries and electronic structures of the X-I···N (X = Cl, Br, I, and N) bonding in strong halogen-bonded (HaB) complexes and in the anionic or cationic halonium ions. In particular, I···N bond lengths in the solid-state associations formed by strong HaB donors (e.g., I2, IBr, ICl, and N-iodosuccinimide) and acceptors (e.g., quinuclidine or pyridines) were in the same range of 2.3 ± 0.1 Å as those in the halonium ions [e.g., the bis(quinuclidine)iodonium cation or the 1,1'-iodanylbis(pyrrolidine-2,5-dione) anion]. In all cases, bond lengths were much closer to those of the N-I covalent bond than to the van der Waals separations of these atoms. The strong N···I bonding in the HaB complexes led to a substantial charge transfer, lengthening and weakening of the I···X bonds, and polarization of the HaB donors. As a result, the central iodine atoms in the strong HaB complexes bear partial positive charges akin to those in the halonium ions. The energies and Mayer bond orders for both N···I and I···X bonds in such associations are also comparable to those in the halonium ions. The similarity of the bonding in such complexes and in halonium ions was further supported by the analysis of electron densities and energies at bond critical (3, -1) points in the framework of the quantum theory of atoms in molecules and by the density overlap region indicator. Overall, all these data point out the analogy of the symmetric N···I···N bonding in the halonium ions and the asymmetric X···I···N bonding in the strong HaB complexes, as well as the weakly covalent character of these 3c-4e interactions.

Crystal structure of bis-(3-carb-oxy-1-methyl-pyrid-inium) octa-bromide

The crystal structure of the title salt, bis-(3-carb-oxy-1-methyl-pyridinium) octa-bromide, 2C7H8NO2 +·Br8 2-, consists of 3-carb-oxy-1-methyl-pyridinium (N-methyl-nicotinic acid) cations, which are stacked between relatively rare [Br8]2- anions. The polybromide [Br8]2- anion has point group symmetry and can be described as being composed of two [Br3]- anions connected with a Br2 mol-ecule in a Z-shaped manner. Contacts between neighboring octa-bromide anions ensure the creation of pseudo-polymeric chains propagating along [111]. The organic cations are located between anionic chains and are connected to each other through O-H⋯O hydrogen bonds and to the [Br8]2- anions through π⋯Br inter-actions that induce the creation of a supra-molecular tri-periodic network. In addition, the presence of weak C-H⋯Br contacts leads to the creation of layers, which align parallel to (11).

Effective Enhancement of Energy Density of Zinc-Polyiodide Flow Batteries by Organic/Penta-iodide Complexation

Based on the ambipolar characteristics and high solubility of ZnI2, zinc-polyiodide flow batteries (ZIFB) have attracted attention as high-energy density flow batteries. However, due to the various oxidation products of iodide (I-) and the formation of iodine (I2) solid precipitates at the positive electrode, the limiting state-of-charge (SoC) of ZIFB has not been clearly defined. Herein, a clear definition of SoC in ZIFBs is given based on the thermodynamic relationship among I-(aq), I3-(aq), I5-(aq), and I2(aq) in the electrolyte. Conventional ZIFBs are limited by their maximum attainable SoC of 87%, at which the fully charged catholyte includes I-, I3-, and I5- ions at molar ratios of 49.6, 32.2, and 18.1%, respectively. Furthermore, two effective strategies to extend the maximum SoC are suggested: (1) increasing the formation constant (Keq) of I3- can raise the availability of I- for electrooxidation by suppressing I2 precipitation, and (2) promoting the production of higher-order polyiodides such as I5- can increase the oxidation state of the charged electrolyte. The addition of 5 vol % triethylene glycol (tri-EG) to the electrolyte increased Keq from 710 to 1123 L mol-1; this increase was confirmed spectrophotometrically. Tri-EG stabilized I5- ions in the form of the I5-/tri-EG complex, thereby converting the main oxidation product from I3- to I5-. The preferred electrochemical production of I5- in the tri-EG electrolyte was observed by electrochemical and computational analyses. As a result, the maximum attainable SoC was enhanced remarkably to 116%, yielding molar ratios of I-, I3-, and I5- ions of 9.1, 11.2, and 79.7%, respectively. This SoC extension effect was confirmed in the ZIFB flow cell with stable charge-discharge cycling at the SoC 120% limit, demonstrating the highest energy density, 249.9 Wh L-1, among all reported ZIFBs.

Biological regulation on iodine using nano-starch for preventing thyroid dysfunction

The growing incidence of thyroid disease triggered by excess iodine uptake poses a severe health threat throughout the world. Extracellular interference therapies impede iodine transport across the sodium-iodide symporter (NIS) membrane protein and thus prevent excessive iodine uptake by thyroid cells, which may lessen the occurrence of disease. Herein, we for the first time utilized nano-starch particles (St NPs) to regulate iodine transport across the NIS protein of thyroid cells by using extracellular interference therapy. By precisely encapsulating iodine within the cavity of a glucan α-helix via hydrogen bonding, extracellular St NPs prevented excess iodine uptake by thyroid cells in vitro and in vivo; this down-regulated the expression of NIS protein (0.06-fold) and autophagy protein LC3B-II (0.35-fold). We also found that St NPs regulated the metabolic pathway of iodine in zebrafish. We believe this proposed strategy offers a novel insight into controlling iodine uptake by the thyroid and indicates a new direction for preventing iodine-induced thyroid disease.

Polyiodo Azole-Based Metal-Organic Framework Energetic Biocidal Material for Synergetic Sterilization Applications

Biological hazards caused by bacteria, viruses, and toxins have become a major survival and development issue facing the international community. However, the traditional method of disinfection and sterilization is helpless in dealing with viruses that spread quickly and are highly infectious. Metal-organic framework (MOF) biocidal materials hold promise as superior alternatives to traditional sterilization materials because of their stable framework structures and unique properties. Now, we demonstrate for the first time the synthesis of a MOF (TIBT-Cu) containing Cu metal centers and tetraiodo-4,4'-bi-1,2,4-triazole as the main ligand. This novel MOF biocidal material has good thermal stability (Td = 278 °C), excellent mechanical sensitivity, and a high bacteriostatic efficiency (>99.90%). Additionally, the particles produced by the combustion of TIBT-Cu are composed of active iodine substances and CuO particles, which can act synergistically against harmful microorganisms such as bacteria and viruses. This study provides a new perspective for the preparation of highly effective bactericidal materials.

Counteranion-mediated efficient iodine capture in a hexacationic imidazolium organic cage enabled by multiple non-covalent interactions

Developing efficient adsorbents to capture radioactive iodine produced from nuclear wastes is highly desired. Here we report the facial synthesis of a hexacationic imidazolium organic cage and its iodine adsorption properties. Crucial role of counteranions has been disclosed for iodine capture with this cage, where distinct iodine capture behaviors were observed when different counteranions were used. Mechanistic investigations, especially with the X-ray crystallographic analysis of the iodine-loaded sample, allowed the direct visualization of the iodine binding modes at the molecular level. A network of multiple non-covalent interactions including hydrogen bonds, halogen bonds, anion···π interactions, electrostatic interaction between polyiodides and the hexacationic skeleton of the cage are found responsible for the observed high iodine capture performance. Our results may provide an alternative strategy to design efficient iodine adsorbents.

Novel Biocompatible Trianglamine Networks for Efficient Iodine Capture

Herein, we report for the first time a biocompatible cross-linked trianglamine (Δ) network for the efficient iodine removal from the vapor phase, water, and seawater. In the vapor phase, the cross-linked network could capture 6 g g-1 of iodine, ranking among the most performant materials for iodine vapor capture. In the liquid phase, this cross-linked network is also capable of capturing iodine at high rates from aqueous media (water and seawater). This network displayed fast adsorption kinetics, and they are fully recyclable. This study reveals the high affinity of iodine for the intrinsic cavity of the trianglamine. The synthesized materials are extremely interesting since they are environmentally friendly and inexpensive and the synthesis could easily be scaled up to be used as the material of choice in response to accidents in the nuclear industry.

Boost of Gas Adsorption Kinetics of Covalent Organic Frameworks via Ionic Liquid Solution Process

Adsorption, storage, and conversion of gases (e.g., carbon dioxide, hydrogen, and iodine) are the three critical topics in the field of clean energy and environmental mediation. Exploring new methods to prepare high-performance materials to improve gas adsorption is one of the most concerning topics in recent years. In this work, an ionic liquid solution process (ILSP), which can greatly improve the adsorption kinetic performance of covalent organic framework (COF) materials for gaseous iodine, is explored. Anionic COF TpPaSO3 H is modified by amino-triazolium cation through the ILSP method, which successfully makes the iodine adsorption kinetic performance (K80% rate) of ionic liquid (IL) modified COF AC4 tirmTpPaSO3 quintuple compared with the original COF. A series of experimental characterization and theoretical calculation results show that the improvement of adsorption kinetics is benefited from the increased weak interaction between the COF and iodine, due to the local charge separation of the COF skeleton caused by the substitution of protons by the bulky cations of ILs. This ILSP strategy has competitive help for COF materials in the field of gas adsorption, separation, or conversion, and is expected to expand and improve the application of COF materials in energy and environmental science.

Iodine Molecules within Triethylenediamine-Based Metal-Organic Frameworks for Hydrolysis/Alkylation Tandem Reactions

The integration of radionuclide iodine molecules in metal-organic frameworks (MOFs) for organic synthesis is attracting considerable research attention due to their specific catalytic performance. However, understanding the comprehensive catalytic behaviors of different types of molecular iodine encapsulated in MOFs for a sequential organic transformation is a great challenge. To address this issue, we have designed two triethylenediamine-functionalized MOFs assembled from 1,3,5-tricarboxyphenyl-2-(triethylenediaminemethyl)benzene-linker and {Cd(COO)3N} or {Cu4(u3-OH)2(COO)6N} clusters. Both MOFs show good stability and adsorption of I2 in the solution and vapor phases. Catalysts obtained after treatment with ethyl acetate present efficient catalytic activity in hydrolysis/alkylation tandem reactions in water. The mechanistic investigations disclose a sequential catalytic process comprising a "hidden" Brønsted acid catalytic hydrolysis of acetals to aldehydes followed by the I2-bonding Lewis acid catalytic alkylation of aldehydes to 3,3'-disubstituted 1H-indoles.

Electron-Donor Functional Groups, Band Gap Tailoring, and Efficient Charge Separation: Three Keys To Improve the Gaseous Iodine Uptake in MOF Materials

Metal-organic frameworks (MOFs) have been largely investigated worldwide for their use in the capture of radioactive iodine due to its potential release during nuclear accident events and reprocessing of nuclear fuel. The present work deals with the capture of gaseous I₂ under a continuous flow and its subsequent transformation into I₃^- within the porous structures of three distinct, yet structurally related, terephthalate-based MOFs: MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂. The synthesized materials exhibited specific surface areas (SSAs) with similar order of magnitude: 1207, 1099, and 1110 m² g^-1 for MIL-125(Ti), MIL-125(Ti)_NH₂, and CAU-1(Al)_NH₂, respectively. Because of that, it was possible to evaluate the influence of other variables over the iodine uptake capacity─such as band gap energies, functional groups, and charge transfer complexes (CTC). After 72 h of contact with the I₂ gas flow, MIL-125(Ti)_NH₂ was able to trap 11.0 mol mol^-1 of I₂, followed by MIL-125(Ti) (8.7 mol mol^-1), and by CAU-1(Al)_NH₂ (4.2 mol mol^-1). The enhanced ability to retain I₂ in the MIL-125(Ti)_NH₂ was associated with a combined effect between its amino group (which has a great affinity toward iodine), its smaller band gap (2.5 eV against 2.6 and 3.8 eV for CAU-1(Al)_NH₂ and MIL-125(Ti), respectively), and its efficient charge separation. In fact, the presence of a linker-to-metal charge transfer (LMCT) mechanism in MIL-125(Ti) compounds separates the photogenerated electrons and holes into the two distinct moieties of the MOF: the organic linker (which stabilizes the holes) and the oxy/hydroxy inorganic cluster (which stabilizes the electrons). This effect was observed using EPR spectroscopy, whereas the reduction of the Ti⁴⁺ cations into the paramagnetic Ti³⁺ species was evidenced after irradiation of the pristine Ti-based MOFs with UV light (<420 nm). In contrast, because CAU-1(Al)_NH₂ exhibits a purely linker-based transition (LBT)─with no EPR signals related to Al paramagnetic species─it tends to exhibit faster recombination of the photogenerated charge carriers as, in this case, both electrons and holes are located over the organic linker. Furthermore, the transformation of the gaseous I₂ into I_n^- [n = 5, 7, 9, ...] intermediates and then into I₃^- species was evaluated using Raman spectroscopy by following the evolution of their respective bands at about 198, 180, and 113 cm^-1. This conversion─which is favored by an effective charge separation and smaller band gaps─increases the I₂ uptake capacity of the compounds by creating specific adsorption sites for these anionic species. In fact, because the -NH₂ groups act as an antenna to stabilize the photogenerated holes, both I_n^- and I₃^- are adsorbed into the organic linker via an electrostatic interaction with these positively charged entities. Finally, changes regarding the EPR spectra before and after the iodine loading were considered to propose a mechanism for the electron transfer from the MOFs structure to the I₂ molecules considering their different characteristics.

Relativistic four-component MRCISD+Q calculations of the six lowest valence states of molecular [Formula: see text] anion including breit interactions

CONTEXT AND RESULTS

This study aimed to obtain potential energy curves within a multireference 4-component relativistic method and to present spectroscopic constants (R[Formula: see text],[Formula: see text],[Formula: see text]x[Formula: see text],[Formula: see text]y[Formula: see text], D[Formula: see text], D[Formula: see text], B[Formula: see text],[Formula: see text],[Formula: see text],[Formula: see text] ), accurate extended Rydberg analytical form, and rovibrational levels for the 6 low-lying states of the I[Formula: see text] anion. For these states, some spectroscopic constants, rovibrational levels, and an accurate analytical form are presented for the first time in literature, and they are of interest for femtosecond and dynamics experiments of I[Formula: see text] as well as for electron attachment of I[Formula: see text]. This study suggests that the inclusion of relativistic and correlation effects treated at the MRCISD+Q level is needed to obtain reliable results, specially for D[Formula: see text].

COMPUTATIONAL AND THEORETICAL TECHNIQUES

The potential energy curves of the ground and the excited states of the molecular iodine anion (I[Formula: see text]) were investigated at multireference configuration interaction (MRCISD) with Davidson size-extensivity correction (denoted as +Q) within a fully relativistic four-component relativistic framework including Breit interaction.

Removal of iodide anions in water by silver nanoparticles supported on polystyrene anion exchanger

The removal of iodide (I^-) from source waters is an effective strategy to minimize the formation of iodinated disinfection by-products (DBPs), which are more toxic than their brominated and chlorinated analogues. In this work, a nanocomposite Ag-D201 was synthesized by multiple in situ reduction of Ag-complex in D201 polymer matrix, to achieve highly efficient removal of iodide from water. Scanning electron microscope /energy dispersive spectrometer characterization showed that uniform cubic silver nanoparticles (AgNPs) evenly dispersed in the D201 pores. The equilibrium isotherms data for iodide adsorption onto Ag-D201 was well fitted with Langmuir isotherm with the adsorption capacity of 533 mg/g at neutral pH. The adsorption capacity of Ag-D201 increased with the decrease of pH in acidic aqueous solution, and reached the maximum value of 802 mg/g at pH 2. This was attributed to the oxidization of I^-, by dissolved oxygen under the catalysis of AgNPs, to I₂ which was finally adsorbed as AgI₃. However, the aqueous solutions at pH 7 - 11 could hardly affect the iodide adsorption. The adsorption of I^- was barely affected by real water matrixes such as competitive anions (SO₄^2-, NO₃^-, HCO₃^-, Cl^-) and natural organic matter, of which interference of NOM was offset by the presence of Ca²⁺. The proposed synergistic mechanism for the excellent performance of iodide adsorption by the absorbent was ascribed to the Donnan membrane effect caused by the D201 resin, the chemisorption of I^- by AgNPs, and the catalytic effect of AgNPs.

Methyl orange as a novel colorimetric iodide indicator with in situ generation of H2O2 by etching uncoated Ag-Ti3C2 nanohybrids

Iodine intake remains a major public health concern, as both iodine excess and deficiency are related to adverse effects on health. Therefore, developing simple and economical methods to detect I^- is still in great demand. Herein, we constructed a visual I^- sensing platform based on the uncoated Ag-Ti₃C₂ nanohybrids using methyl orange (MO) as a colorimetric indicator. Plasmonic nanostructures are frequently employed in colorimetric analysis, but uncoated Ag nanoparticles (NPs) are unstable because their surface energies are usually high. Considering that Ag NPs can be etched by I^- via forming Ag-I bond, we introduce Ag-Ti₃C₂ nanohybrids because uncoated Ag NPs with immaculate surfaces are more conducive to binding with I^- and being etched. Dissolved O₂ molecules adsorbed on Ti³⁺ of Ti₃C₂ MXenes enable the in situ generation of H₂O₂ by iodine-etching of uncoated Ag-Ti₃C₂ nanohybrids. ∙OH radicals promote the degradation of MO through a self-driven Fenton-like process, exhibiting the color variation from orange to transparent. Under optimal conditions, the absorbance of MO at 465 nm decreases linearly with the concentration of I^- in the range of 0.5-300 μM, with a limit of detection as low as 0.31 μM. This work opens the feasibility of iodine-etching of Ag in developing novel probes for facile colorimetric determination of I^-.

Highly efficient iodine capture and ultrafast fluorescent detection of heavy metals using PANI/LDH@CNT nanocomposite

Here, the hybrid material of polyaniline/layered double hydroxide@carbonnanotubes (PANI/LDH@CNT) is considered a multifunctional material. Instrumental methods, including FTIR, XRD, TEM, SEM, and TGA/DTA were utilized to characterize PANI/LDH@CNT. The polymerization method created PANI/LDH@CNT as an adsorbent to remove toxic iodine in hexane solution with a capture capacity of 303.20 mg g^-1 during 9 h. It is 900 mg g^-1 in the vapor phase within 24 h. After three cycles, the PANI/LDH@CNT could be regenerated while maintaining 91.90 % iodine adsorption efficiency. Due to the presence of free amine (-N) groups, OH^-, CO₂H, and π-π conjugated structures in the PANI/LDH@CNT, it is also explored for efficient iodine uptake. It was demonstrated that the pseudo-first-order (PFO) and Langmuir model had the optimum correlation with the kinetic and isotherm data, respectively. Moreover, the use of PANI/LDH@CNT is not only limited to iodine capture; it can also be utilized as a sensitive sensor that displays a fluorescence "turn-off" response for Mn⁷⁺ and Cr⁶⁺ ions and a fluorescence "turn-on" response in the case of Al³⁺ ions. The fluorescence intensity of the PANI/LDH@CNT was turned off in the presence of Mn⁷⁺ and Cr⁶⁺ because of the fluorescence inner filter effect (IFE) mechanism. In contrast, the fluorescence intensity was turned on in the case of Al³⁺, relying on the chelation-enhanced fluorescence (CHEF) effect mechanism. Under optimal conditions, the limit of detection (LOD) of 51, 59, and 81 nM for Mn⁷⁺, Cr^6+, and Al³⁺, respectively. According to the literature, this is probably the first example based on PANI/LDH@CNT as a multifunctional hybrid material employed as an adsorbent for capturing radioactive iodine and as a chemosensor for detecting heavy metal ions in aqueous solutions.

Exploiting a Multi-Responsive Oxadiazole Moiety in One Three-Dimensional Metal-Organic Framework for Remedies to Three Environmental Issues

Multifunctional metal-organic frameworks (MOFs) rely on the properties of metal centers (nodes) and/or linkers (struts) for their diverse applications in the emerging field of research. Currently, there is a huge demand for MOF materials in the field of capture/fixation/sensing of air pollutants, harmful chemical effluents, and nuclear waste. However, it is a challenging task to utilize one MOF for providing remedies to all these issues. On the basis of our current research activities, we have identified that an oxadiazole moiety-a five-membered ring with two different heteroatoms (O and N)-in a carboxylate linker can be the key to generating such MOF materials for its (a) inherent polarizable nature and molecular docking ability and (b) photoluminescence properties. In this work, we report a 3D MOF {[Co₂(oxdz)₂(tpbn)(H₂O)₂]·4H₂O}_n (1), self-assembled at room temperature from a three-component reaction, with an oxadiazole moiety (where H₂oxdz = 4,4'-(1,3,4-oxadiazole-2,5-diyl)dibenzoic acid and tpbn = N,N',N,"N″'-tetrakis(2-pyridylmethyl)-1,4-diaminobutane). The inherent polarizable nature of the oxadiazole moiety in 1 has been efficiently exploited for (i) multimedia iodine capture and (ii) fixation of CO₂ under solvent-free and ambient conditions. On the other hand, the luminescent nature of the framework is found to be an efficient, highly preferred turn-on sensor for the ultra-fast detection of ketones with a limit as low as parts-per-trillion (mesitylene oxide: 447 ppt; cycloheptanone: 4.7 ppb; cyclohexanone: 17.2 ppb; acetylacetone: 18 ppb).

Solvent dependent iodide oxidation in metal-halide perovskite precursor solutions

Solar cell absorbing layers made of metal-halide perovskites (MHPs) are usually deposited from solution phase precursors, which is one of the reasons why these materials received huge research attention in the last few years. A detailed knowledge of the solution chemistry is critical to understand the formation of MHP thin films and thus to control their optoelectronic properties and the reproducibility issues that usually affect their synthesis. In this regard, the concentration of triiodide, I₃^-, is one factor known to have an influence on regulating important aspects such as the particle size in the solution and the defect concentration in the film. In this study, we highlight an underestimated source of I₃^-, namely the iodide salt solutions ubiquitously employed in MHP synthetic routes, which not only lead to the formation of I₃^- but also detracts available I^- for the MHP synthesis, thus establishing under-stoichiometric conditions. Particularly, we show how the oxidation of I^- to I₃^- changes in time with both the iodide salt counter-cation (K⁺, CH₃NH₃⁺) and the used solvent, meaning that variable quantities of I₃^- are found depending on the synthesis conditions, with enhanced oxidation found in the γ-butyrolactone (GBL) solvent. Though these differences are generally small, we shed light on a hidden and ever-present reaction which is likely to be related to the overall processing quality of MHP thin films.

Synthesis, Crystal, and Electronic Structure of (HpipeH2)2[Sb2I10](I2), with I2 Molecules Linking Sb2X10 Dimers into a Polymeric Anion: A Strategy for Optimizing a Hybrid Compound's Band Gap

In searching for a tool for optimizing the band gap of a hybrid compound capable of serving as a light-harvesting material in lead-free photovoltaics, we synthesized a new polyiodoantimonate (HpipeH₂)₂[Sb₂I₁₀](I₂) and analyzed its crystal and electronic structure by application of X-ray crystal structure analysis, Raman and diffuse reflectance spectroscopies, and quantum chemical calculations. It was demonstrated that I₂ molecules link Sb₂I₁₀ edge-sharing octahedra into zig-zag chains, whereas the organic cations link inorganic anionic chains into a 3D structure featuring a complex pattern of covalent bonds and non-covalent interactions. Overall, these features provide the background for forming the electronic structure with a narrow band gap of 1.41 eV, therefore being a versatile tool for optimizing the band gap of a potential light-harvesting hybrid compound.

Superfast Capture of Iodine from Air, Water, and Organic Solvent by Potential Dithiocarbamate-Based Organic Polymer

Organic polymers are widely explored due to their high stability, scalability, and more facile modification properties. We developed cost-effective dithiocarbamate-based organic polymers synthesized using diamides, carbon disulfide, and diamines to apply for environmental remediation. The sequestration of radioiodine is a serious concern to tackle when dealing with nuclear power for energy requirements. However, many of the current sorbents have the problem of slower adsorption for removing iodine. In this report, we discuss the utilization of an electron-rich dithiocarbamate-based organic polymer for the removal of iodine in a very short time and with high uptake. Our material showed 2.8 g/g uptake of vapor iodine in 1 h, 915.19 mg/g uptake of iodine from cyclohexane within 5 s, 93% removal of saturated iodine from water in 1 min, and 1250 mg/g uptake of triiodide ions from water within 30 s. To the best of our knowledge, the iodine capture was faster than previously observed for any existing material. The material was fully recyclable when applied for up to four cycles. Hence, this dithiocarbamate-based polymer can be a promising system for the fast removal of various forms of iodine and, thus, enhance environmental security.

Tracking structural phase transitions via single crystal x-ray diffraction at extreme conditions: advantages of extremely brilliant source

Highly brilliant synchrotron source is indispensable to track pressure-induced phenomena in confined crystalline samples in megabar range. In this article, a number of experimental variables affecting the quality high-pressure single-crystal x-ray diffraction data is discussed. An overview of the recent advancements in x-ray diffraction techniques at extreme conditions, in the frame of European Synchrotron Radiation Facility (ESRF)- Extremely Bright Source (EBS), is presented. Particularly, ID15b and ID27 beamlines have profited from the source upgrade, allowing for measurements of a few-micron crystals in megabar range. In case of ID27, a whole new beamline has been devised, including installation of double-multilayer mirrors and double crystal monochromator and construction of custom-made experimental stations. Two case studies from ID27 and ID15b are presented. Hypervalent CsI₃crystals, studied up to 24 GPa, have shown a series of phase transitions:Pnma → P-3c1→ Pm-3n. First transition leads to formation of orthogonal linear iodine chains made of I₃^-. Transformation to the cubic phase at around 21.7 GPa leads to equalization of interatomic I-I distances and formation of homoleptic I_n^m-chains. The second study investigates elastic properties and structure of jadarite, which undergoes isosymmetric phase transition around 16.6 GPa. Despite a few-micron crystal size, twinning and dramatic loss of crystal quality, associated with pressure-induced phase transitions, crystal structures of both compounds have been determined in a straightforward matter, thanks to the recent developments within ESRF-EBS.

Iodine speciation in deep eutectic solvents

Iodine has been shown to act as a good electrocatalyst for metal digestion in deep eutectic solvents (DESs) but little is known about its speciation or reactivity in these high chloride containing media. Extended X-ray absorption fine structure (EXAFS) spectroscopy measurements were made at the iodine K-edge in a range of DESs with different glycolic or acidic hydrogen bond donors (HBDs), along with examining the effect of iodine concentration between 0.01 and 0.5 mol dm^-3. Three groups of speciation were detected: mixed I₂Cl^-/I₃^- (glycol and lactic acid systems), mixed I₃^-/I₂ (oxalic acid and urea systems), and singular I₃^- (levulinic acid system). UV-vis spectroscopy was used to confirm the speciation. Electrochemistry showed that iodine redox behaviour was unaffected by the changing speciation. Leaching data showed that metal oxidation was related not only to changing iodine speciation, but also the reactivity and coordination ability of the HBD.

Rechargeable Iodine Batteries: Fundamentals, Advances, and Perspectives

Lattice distortion and structure collapse are two intrinsic issues of intercalative-type electrodes derived from repeated ion shuttling. In contrast, rechargeable iodine batteries (RIBs) based on the conversion reaction of iodine stand out for high reversibility and satisfying voltage output characteristics no matter when dealing with both monovalent and multivalent ions. Foreseeable performance superiorities lead to an influx of considerable focus and thus a renaissance in RIBs. This review provides a comprehensive overview of the fundamental chemistry of RIBs from the perspectives of physicochemical properties, conversion mechanism, and existing issues. Furthermore, we refine the optimization strategies for high-performance RIBs, focusing on physical adsorption and chemical interaction strengthening, electrolytes regulation, and nanoscale-iodine design. Then the pros and cons of tremendous RIBs are compared and specified. Ultimately, we conclude with remaining challenges and perspectives to our best knowledge, which may inspire the construction of next-generation RIBs.

Self-Assembly of Supramolecular Architectures Driven by σ-Hole Interactions: A Halogen-Bonded 2D Network Based on a Diiminedibromido Gold(III) Complex and Tribromide Building Blocks

The reaction of the complex [Au(phen)Br₂](PF₆) (phen = 1,10-phenanthroline) with molecular dibromine afforded {[Au(phen)Br₂](Br₃)}_∞ (1). Single crystal diffraction analysis showed that the [Au(phen)Br₂]⁺ complex cations were bridged by asymmetric tribromide anions to form infinite zig-zag chains featuring the motif ···Au–Br···Br–Br–Br···Au–Br···Br–Br–Br···. The complex cation played an unprecedented halogen bonding (XB) donor role engaging type-I and type-II XB noncovalent interactions of comparable strength with symmetry related [Br₃]⁻ anions. A network of hydrogen bonds connects parallel chains in an infinite 2D network, contributing to the layered supramolecular architecture. DFT calculations allowed clarification of the nature of the XB interactions, showing the interplay between orbital mixing, analyzed at the NBO level, and electrostatic contribution, explored based on the molecular potential energy (MEP) maps of the interacting synthons.

Investigation of the metastable structures of polyiodide in acetonitrile studied using global reaction route mapping and the reference interaction site model self-consistent field explicitly including constrained spatial electron density distribution

In this study, we theoretically analyzed the metastable structures of polyiodide (I₇^-) in the gas and acetonitrile phases using global reaction route mapping and the reference interaction site model self-consistent field explicitly including constrained spatial electron density distribution. From the chemical reaction pathways of I₇^- in acetonitrile, it was found that there would be 2 types of isomerization pathways. One proceeds with constant stoichiometry and the other takes place by breaking and forming I-I bonds. In addition, we discovered that I₇^- had various metastable structures within ∼10 kcal mol^-1. Comparing the most stable structure in the gas and acetonitrile phases, the tetrapot type is found to be the most stable structure in the gas phase; however, it is the zigzag type in acetonitrile. In order to understand this difference, we performed the decomposition analysis of the thermal correlation term in the gas and acetonitrile phases. It was found that thermal correction plays a key role in the stability and we could explain the difference in the population of the EQ states of I₇^- in each phase. Overall, we revealed that the solvation effect must be one of the crucial factors to stabilize the isomers of I₇^- and determine the chemical reaction pathways.

Properties and Stabilities of Cyclic and Open Chains of Halogen Bonds

Open and cyclic chains from two to eight units of ICl and IF are constructed and examined by density functional theory (DFT) calculations. These chains contain either I···I or I···X halogen bonds (XBs) where X refers to Cl or F. The closed rings are more stable than the open chains due to the presence of an additional XB and enhanced cooperativity. This pattern is true even for most trimers where there is sizable geometric distortion in the rings. I···F rings are generally more stable than the corresponding I···I cycles as the I···F bond is stronger than I···I even in the simple dimer. However, I···I rings are comparable in energy to I···Cl. It is possible to construct I···I rings of at least as large as eight units, which are held together exclusively by XBs. On the other hand, the maximum possible size of I···X rings is 6. Red shifts are observed in the I-X stretching frequency bands, which magnify as the chain, both cyclic and open, grows longer. The NMR chemical shielding of the I atoms increases for I···I chains but diminishes when I···Cl bonds are present.

An I 6 2 − ${\mathrm{I}}_{6}^{2-}$ anion in the crystal structure of theophyllinium triiodide monohydrate, C7H11I3N4O3

C7H11I3N4O3, triclinic, P 1 ‾ $P\overline{1}$ (no. 2), a = 9.28478(14) Å, b = 12.2214(2) Å, c = 13.4088(2) Å, α = 76.2062(14)°, β = 88.2421(13)°, γ = 89.4102(13)°, Z = 4, V = 1476.95(4) Å3, Rgt(F) = 0.0198, wR ref = 0.0494, T = 100 K.