Exploring Dynamics in the Far-Infrared with Terahertz Spectroscopy

Solvation Properties of Neutral Gold Species in Supercritical Water Studied By THz Spectroscopy

Supercritical water provides distinctly different solvation properties compared to what is known from liquid water. Despite its prevalence deep in the Earth's crust and its role in chemosynthetic ecosystems in the vicinity of hydrothermal vents, molecular insights into its solvation mechanisms are still very scarce compared to what is known for liquid water. Recently, neutral metal particles have been detected in hydrothermal fluids and proposed to explain the transport of gold species to ore deposits on Earth. Using ab initio molecular dynamics, we elucidate the solvation properties of small gold species at supercritical conditions. The neutral metal clusters themselves contribute enormous THz intensity not because of their intramolecular vibrations, but due to their pronounced electronic polarization coupling to the dynamical supercritical solvent, leading to a continuum absorption up to about 1000 cm-1. On top, long-lived interactions between the gold clusters and solvation water leads at these supercritical conditions to a sharp THz resonance that happens to be close to the one due to H-bonding in liquid water at ambient conditions. The resulting distinct resonances can be used to analyse the solvation properties of neutral metal particles in supercritical aqueous solutions.

Quantification of resistant starch content in rice after hydrothermal treatments using terahertz spectroscopy

Since hydrothermal treatments can enhance resistant starch (RS) content in rice and provide health benefits when consumed, a less laborious and non-destructive method to determine RS content is needed. Terahertz (THz) spectroscopy is hypothesized as a suitable method to quantify RS content in rice after hydrothermal treatment with its sensitivity for the intermolecular forces increase in the formation of RS. In this study, we first used the traditional in vitro hydrolysis method to determine the content of RS in rice. Then, the potential of starch absorbance peaks to quantify RS content after three commonly used hydrothermal methods, soaking, mild heat-moisture treatment, and parboiling, was investigated. The second derivative intensities of the peak at 9.0, 10.5, 12.1, and 13.1 THz were confirmed as being correlated with RS content and showed the high accuracy to predict RS content in samples (R2 > 0.96). Our results indicate the RS content of hydrothermally treated rice can be accurately quantified using these peaks.

Accelerated Bayesian Inference for Molecular Simulations using Local Gaussian Process Surrogate Models

While Bayesian inference is the gold standard for uncertainty quantification and propagation, its use within physical chemistry encounters formidable computational barriers. These bottlenecks are magnified for modeling data with many independent variables, such as X-ray/neutron scattering patterns and electromagnetic spectra. To address this challenge, we employ local Gaussian process (LGP) surrogate models to accelerate Bayesian optimization over these complex thermophysical properties. The time-complexity of the LGPs scales linearly in the number of independent variables, in stark contrast to the computationally expensive cubic scaling of conventional Gaussian processes. To illustrate the method, we trained a LGP surrogate model on the radial distribution function of liquid neon and observed a 1,760,000-fold speed-up compared to molecular dynamics simulation, beating a conventional GP by three orders-of-magnitude. We conclude that LGPs are robust and efficient surrogate models poised to expand the application of Bayesian inference in molecular simulations to a broad spectrum of experimental data.

Terahertz Spectroscopy of Aqueous Solutions of Sodium Halides (NaX): Self- and Cross-Correlation Contributions of Ions and Hydration Shell Water for X- = F-, Cl-, Br-, and I. J Phys Chem B 2023;127:9323-9335. [PMID: 37871257 DOI: 10.1021/acs.jpcb.3c05228] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

We investigated the terahertz (THz) absorption spectra of aqueous sodium halide solutions through molecular dynamics simulations using polarizable models of both water and ions. Specifically, we have considered aqueous solutions (∼1 M) of NaF, NaCl, NaBr, and NaI and calculated the difference THz spectrum of these solutions by subtracting the corresponding pure water contribution from the total THz spectrum of an ionic solution. The difference absorption spectrum of a given solution is then dissected into contributions from ion and ion-water correlations and also modifications of water-water correlations in the presence of the ions. The different components are further decomposed into induced dipole and permanent charge/dipole components and also into self- and cross-correlation components. The ion-water cross-correlation components are subsequently decomposed into contributions coming from different solvation shells through radially resolved calculations of such ion-water cross-correlations. Through all of these dissections, we could investigate the origin of different parts of the difference THz spectra of the sodium halide solutions studied here. It is found that while features below or around 100 cm-1 and also around 200 cm-1 arise mainly from ion and ion-water motion, that at the librational region above 600 cm-1 primarily originates from changes in water librational motion influenced by the ions. The variations of intensities of different components are also linked to the size and charge density of the anions in the solutions.

Anisotropic honeycomb stack metamaterials of graphene for ultrawideband terahertz absorption

Graphene aerogels have implied great potential for electromagnetic wave absorption. However, the investigation of their design for broadband absorption in the terahertz (THz) range remains insufficient. Here, we propose an anisotropic honeycomb stack metamaterial (AHSM) based on graphene to achieve ultrawideband THz absorption. The absorption mechanism is elucidated using the effective medium method, offering deeper physics insights. At low THz frequencies, the impedance matching from the air to the AHSM can be improved by reducing the chemical potential of graphene for high absorption. There is a suppression of absorption at the intermediate frequencies due to constructive interference, which can be avoided by shortening the sizes of honeycomb edges. With the aim to elevate absorption at high frequencies, one can increase the stack layer number to enhance multiple reflections and destructive interference within the metastructure. Based on the above principles, we design an AHSM that achieves a broadband absorbance of over 90 % from 1 THz to 10 THz. This absorption can tolerate a wide range of incident angles for both TE and TM wave excitations. Our research will provide a theoretical guide to future experimental exploration of graphene aerogels for THz metamaterial absorber applications.

Tilted pulse front pumping techniques for efficient terahertz pulse generation

Optical rectification of femtosecond laser pulses has emerged as the dominant technique for generating single- and few-cycle terahertz (THz) pulses. The advent of the tilted pulse front pumping (TPFP) velocity matching technique, proposed and implemented two decades ago, has ushered in significant advancements of these THz sources, which are pivotal in the realm of THz pump-probe and material control experiments, which need THz pulses with microjoule energies and several hundred kV/cm electric field strengths. Furthermore, these THz sources are poised to play a crucial role in the realization of THz-driven particle accelerators, necessitating millijoule-level pulses with tens of MV/cm electric field strengths. TPFP has enabled the efficient velocity matching in lithium niobate crystals renowned for their extraordinary high nonlinear coefficient. Moreover, its adaptation to semiconductor THz sources has resulted in a two-hundred-times enhancement in conversion efficiency. In this comprehensive review, we present the seminal achievements of the past two decades. We expound on the conventional TPFP setup, delineate its scaling limits, and elucidate the novel generation TPFP configurations proposed to surmount these constraints, accompanied by their preliminary outcomes. Additionally, we provide an in-depth analysis of the THz absorption, refractive index, and nonlinear coefficient spectra of lithium niobate and widely used semiconductors employed as THz generators, which dictate their suitability as THz sources. We underscore the far-reaching advantages of tilted pulse front pumping, not only for LN and semiconductor-based THz sources but also for selected organic crystal-based sources and Yb-laser-pumped GaP sources, previously regarded as velocity-matched in the literature.

Identification of Chemical and Structural Characteristics of Acrylic Paint Layer Using Terahertz Metasurfaces

The precise investigation and monitoring of the internal structural change within complex layered systems are crucial, as the emergence of undesirable defects or formation of secondary internal structures significantly exerts a profound influence on the overall properties of the system. We demonstrate an advanced sensing platform utilizing terahertz metasurfaces, allowing chemical detection and precise identification within an acrylic paint layer with a noticeable sensitivity, reaching down to several hundreds of nanometers, in nondestructive and noncontact manners. The identification of solid and mixed paint samples was achieved by analyzing their optical properties, including the refractive index and absorption coefficient. Notably, the presence of internal pore defects within the mixed acrylic paint led to geometric distortions, affecting the state of the overall system. Intriguingly, even in cases where acrylic paint exhibited identical colors perceptible under visible light, distinct discrimination and identification of chemical compositions were successfully proposed.

Single-shot terahertz time-domain spectrometer using 1550 nm probe pulses and diversity electro-optic sampling

Classical terahertz spectroscopy usually requires the use of Fourier transform or Time-Domain Spectrometers. However, these classical techniques become impractical when using recent high peak power terahertz sources - based on intense lasers or accelerators - which operate at low repetition rate. We present and test the design of a novel Time-Domain Spectrometer, that is capable of recording a whole terahertz spectrum at each shot of the source, and that uses a 1550 nm probe fiber laser. Single-shot operation is obtained using chirped-pulse electro-optic sampling in Gallium Arsenide, and high bandwidth is obtained by using the recently introduced Diversity Electro-Optic Sampling (DEOS) method. We present the first real-time measurements of THz spectra at the TeraFERMI Coherent Transition Radiation source. The system achieves 2.5 THz bandwidth with a maximum dynamic range reaching up to 25 dB. By reducing the required measurement time from minutes to a split-second, this strategy dramatically expands the application range of high power low-repetition rate THz sources.

Investigating the function and design of molecular materials through terahertz vibrational spectroscopy

Terahertz spectroscopy has proved to be an essential tool for the study of condensed phase materials. Terahertz spectroscopy probes the low-frequency vibrational dynamics of atoms and molecules, usually in the condensed phase. These nuclear dynamics, which typically involve displacements of entire molecules, have been linked to bulk phenomena ranging from phase transformations to semiconducting efficiency. The terahertz region of the electromagnetic spectrum has historically been referred to as the 'terahertz gap', but this is a misnomer, as there exist a multitude of methods for accessing terahertz frequencies, and now there are cost-effective instruments that have made terahertz studies much more user-friendly. This Review highlights some of the most exciting applications of terahertz vibrational spectroscopy so far, and provides an in-depth overview of the methods of this technique and its utility to the study of the chemical sciences.

Terahertz Optical Properties and Carrier Behaviors of Graphene Oxide Quantum Dot and Reduced Graphene Oxide Quantum Dot via Terahertz Time-Domain Spectroscopy

Graphene quantum dots (GQDs) with a band gap have been widely applied in many fields owing to their unique optical properties. To better utilize the optical advantages of GQDs, it is important to understand their optical characteristics. Our study demonstrates the optical properties and carrier behaviors of synthesized graphene oxide quantum dot (GOQD) and reduced graphene oxide quantum dot (rGOQD) pellets via Terahertz time-domain spectroscopy (THz-TDS). The complex permittivity and optical conductivity are obtained in the terahertz region, indicating that the optical conductivity of the GOQD is higher than that of the rGOQD. Although rGOQD has a higher carrier density, approximately 1.5-times than that of GOQD, the lower charge carrier mobility of the rGOQD, which is obtained using Drude-Lorentz oscillator model fitting contributes to a decrease in optical conductivity. This lower mobility can be attributed to the more significant number of defect states within the rGOQD compared to GOQD. To the best of our knowledge, our study initially demonstrates the optical property and carrier behaviors of GOQD and rGOQD in the THz region. Moreover, this study provides important information on factors influencing carrier behavior to various fields in which carrier behavior plays an important role.

Ultrafast terahertz emission from emerging symmetry-broken materials

Nonlinear optical spectroscopies are powerful tools for investigating both static material properties and light-induced dynamics. Terahertz (THz) emission spectroscopy has emerged in the past several decades as a versatile method for directly tracking the ultrafast evolution of physical properties, quasiparticle distributions, and order parameters within bulk materials and nanoscale interfaces. Ultrafast optically-induced THz radiation is often analyzed mechanistically in terms of relative contributions from nonlinear polarization, magnetization, and various transient free charge currents. While this offers material-specific insights, more fundamental symmetry considerations enable the generalization of measured nonlinear tensors to much broader classes of systems. We thus frame the present discussion in terms of underlying broken symmetries, which enable THz emission by defining a system directionality in space and/or time, as well as more detailed point group symmetries that determine the nonlinear response tensors. Within this framework, we survey a selection of recent studies that utilize THz emission spectroscopy to uncover basic properties and complex behaviors of emerging materials, including strongly correlated, magnetic, multiferroic, and topological systems. We then turn to low-dimensional systems to explore the role of designer nanoscale structuring and corresponding symmetries that enable or enhance THz emission. This serves as a promising route for probing nanoscale physics and ultrafast light-matter interactions, as well as facilitating advances in integrated THz systems. Furthermore, the interplay between intrinsic and extrinsic material symmetries, in addition to hybrid structuring, may stimulate the discovery of exotic properties and phenomena beyond existing material paradigms.

Superradiant emission in a high-mobility two-dimensional electron gas

We use terahertz time-domain spectroscopy to study gallium arsenide two-dimensional electron gas samples in external magnetic field. We measure cyclotron decay as a function of temperature from 0.4 to10Kand a quantum confinement dependence of the cyclotron decay time belowT0=1.2K. In the wider quantum well, we observe a dramatic enhancement in the decay time due to the reduction in dephasing and the concomitant enhancement of superradiant decay in these systems. We show that the dephasing time in 2DEG's depends on both the scatteringrateand also on the distribution of scattering angles.

Terahertz Kerr Effect of Liquids

In recent years, tremendous advancements have been made in various technologies such as far-infrared, low-frequency Raman, and two-dimensional (2D) Raman terahertz (THz) spectroscopies. A coherent method has emerged from numerous experimental and theoretical investigations of molecular dynamics in liquids by comparing linear and non-linear spectroscopic techniques. Intermolecular hydrogen bond vibration, molecular reorientation motion, and interaction between molecule/ionic solute and hydrogen bonds have been demonstrated to occur in the THz region, which are closely related to their physical/chemical properties and structural dynamics. However, precise probing of various modes of motion is difficult because of the complexity of the collective and cooperative motion of molecules and spectral overlap of related modes. With the development of THz science and technology, current state-of-the-art THz sources can generate pulsed electric fields with peak intensities of the order of microvolts per centimeter (MV/cm). Such strong fields enable the use of THz waves as the light source for non-linear polarization of the medium and in turn leads to the development of the emerging THz Kerr effect (TKE) technique. Many low-frequency molecular motions, such as the collective directional motion of molecules and cooperative motion under the constraint of weak intermolecular interactions, are resonantly excited by an intense THz electric field. Thus, the TKE technique provides an interesting prospect for investigating low-frequency dynamics of different media. In view of this, this paper first summarizes the research work on TKE spectroscopy by taking a solid material without low-frequency molecular motions as an example. Starting from the principle of TKE technology and its application in investigating the properties of solid matter, we have explored the low-frequency molecular dynamics of liquid water and aqueous solutions using TKE. Liquid water is a core of life and possesses many extraordinary physical and biochemical properties. The hydrogen bond network plays a crucial role in these properties and is the main reason for its various kinetic and thermodynamic properties, which differ from those of other liquids. However, the structure of the hydrogen bond network between water and solutes is not well known. Therefore, evaluating the hydrogen bond-related kinetic properties of liquid water is important.

Frequency Down-Conversion of Optical Pulse to the Far Infrared and THz Frequency Ranges Due to the Cascading Process in a Medium with a Quadratic Nonlinear Response

Difference-frequency generation is a well-known method of obtaining IR and THz radiation. It has many practical applications, such as sensing, optical metrology, diagnostics, detection and identification of substances, etc. One of the generation methods is based on the three-wave interaction in a medium with second-order nonlinear susceptibility. In this study, we investigated a special case of the frequency down-conversion into IR and THz ranges of the frequencies: the frequencies of interacting waves were multiple. We analyzed theoretically two cases of three-wave interactions: amplification of the infrared (or THz) radiation (incident weak intensity of a wave at this frequency) and a wave generation with the difference-frequency (incident zero-value intensity at this frequency). The amplification efficiency could achieve 75% and the maximal frequency conversion efficiency is about 25%. The computer simulation results made for the femtosecond pulse interaction in a crystal with the wavelength 4, 10, and 24 μm demonstrates applicability of such a scheme for the frequency down-conversion. This scheme of the THz radiation generation is a perspective tool for its application in the screening system for the detection and identification of substances.

Design of a terahertz dual-channel modulator based on metamaterials

In this paper, we propose a terahertz dual-channel modulator by combining a high electron mobility transistor (HEMT) with a metamaterials structure, in which the HEMT is embedded in the opening of the structure metamaterial. The modulator consists of a metamaterial structure, silicon carbide (SiC), HEMT active device, and feeder. The concentration of the two-dimensional electron gas (2DEG) in the HEMT can be controlled by gate voltages, and the change of the concentration can realize the modulation of the intensity and phase of the terahertz wave. The simulation results indicate that when a single channel works, the modulation depth is 90.7% at 0.22 THz and 94.0% at 0.34 THz. When both channels work, the modulation depth is 88.9% at 0.22 THz and 93.3% at 0.34 THz. The terahertz modulator designed in this paper can work in two frequency bands and can be controlled independently, which efficiently uses the spectrum resources and has broad application prospects in the field of terahertz communication.

Nonlinear rotational spectroscopy reveals many-body interactions in water molecules

Because of their central importance in chemistry and biology, water molecules have been the subject of decades of intense spectroscopic investigations. Rotational spectroscopy of water vapor has yielded detailed information about the structure and dynamics of isolated water molecules, as well as water dimers and clusters. Nonlinear rotational spectroscopy in the terahertz regime has been developed recently to investigate the rotational dynamics of linear and symmetric-top molecules whose rotational energy levels are regularly spaced. However, it has not been applied to water or other lower-symmetry molecules with irregularly spaced levels. We report the use of recently developed two-dimensional (2D) terahertz rotational spectroscopy to observe high-order rotational coherences and correlations between rotational transitions that were previously unobservable. The results include two-quantum (2Q) peaks at frequencies that are shifted slightly from the sums of distinct rotational transitions on two different molecules. These results directly reveal the presence of previously unseen metastable water complexes with lifetimes of 100 ps or longer. Several such peaks observed at distinct 2Q frequencies indicate that the complexes have multiple preferred bimolecular geometries. Our results demonstrate the sensitivity of rotational correlations measured in 2D terahertz spectroscopy to molecular interactions and complexation in the gas phase.

The necessity of periodic boundary conditions for the accurate calculation of crystalline terahertz spectra

Terahertz vibrational spectroscopy has emerged as a powerful spectroscopic technique, providing valuable information regarding long-range interactions - and associated collective dynamics - occurring in solids. However, the terahertz sciences are relatively nascent, and there have been significant advances over the last several decades that have profoundly influenced the interpretation and assignment of experimental terahertz spectra. Specifically, because there do not exist any functional group or material-specific terahertz transitions, it is not possible to interpret experimental spectra without additional analysis, specifically, computational simulations. Over the years simulations utilizing periodic boundary conditions have proven to be most successful for reproducing experimental terahertz dynamics, due to the ability of the calculations to accurately take long-range forces into account. On the other hand, there are numerous reports in the literature that utilize gas phase cluster geometries, to varying levels of apparent success. This perspective will provide a concise introduction into the terahertz sciences, specifically terahertz spectroscopy, followed by an evaluation of gas phase and periodic simulations for the assignment of crystalline terahertz spectra, highlighting potential pitfalls and good practice for future endeavors.

Multipulse Terahertz Spectroscopy Unveils Hot Polaron Photoconductivity Dynamics in Metal-Halide Perovskites

Hot carriers in metal-halide perovskites (MHPs) present a foundation for understanding carrier-phonon coupling in the materials as well as the prospective development of high-performance hot carrier photovoltaics. While the carrier population dynamics during cooling have been scrutinized, the evolution of the hot carrier properties, namely mobility, remains largely unexplored. Here we introduce novel ultrafast visible pump-infrared push-terahertz probe spectroscopy to monitor the real-time conductivity dynamics of cooling carriers in methylammonium lead iodide. We find a decrease in mobility upon optically re-exciting the carriers, as expected for band transport. Surprisingly, the conductivity recovery is incommensurate with the hot carrier population dynamics measured by infrared probe and exhibits a negligible dependence on the hot carrier density. Our results reveal the importance of localized lattice heating toward the hot carrier mobility. This collective polaron-lattice phenomenon may contribute to the unusual photophysics of MHPs and should be accounted for in hot carrier devices.

Time-domain terahertz spectroscopy in high magnetic fields

There are a variety of elementary and collective terahertz-frequency excitations in condensed matter whose magnetic field dependence contains significant insight into the states and dynamics of the electrons involved. Often, determining the frequency, temperature, and magnetic field dependence of the optical conductivity tensor, especially in high magnetic fields, can clarify the microscopic physics behind complex many-body behaviors of solids. While there are advanced terahertz spectroscopy techniques as well as high magnetic field generation techniques available, a combination of the two has only been realized relatively recently. Here, we review the current state of terahertz time-domain spectroscopy (THz-TDS) experiments in high magnetic fields. We start with an overview of time-domain terahertz detection schemes with a special focus on how they have been incorporated into optically accessible high-field magnets. Advantages and disadvantages of different types of magnets in performing THz-TDS experiments are also discussed. Finally, we highlight some of the new fascinating physical phenomena that have been revealed by THz-TDS in high magnetic fields.

Non-plasmonic improvement in photoconductive THz emitters using nano- and micro-structured electrodes

We investigate here terahertz enhancement effects arising from micrometer and nanometer structured electrode features of photoconductive terahertz emitters. Nanostructured electrode based emitters utilizing the palsmonic effect are currently one of the hottest topics in the research field. We demonstrate here that even in the absence of any plasmonic resonance with the pump pulse, such structures can improve the antenna effect by enhancing the local d.c. electric field near the structure edges. Utilizing this effect in Hilbert-fractal and grating-like designs, enhancement of the THz field of up to a factor of ∼ 2 is observed. We conclude that the cause of this THz emission enhancement in our emitters is different from the earlier reported plasmonic-electrode effect in a similar grating-like structure. In our structure, the proximity of photoexcited carriers to the electrodes and local bias field enhancement close to the metallization cause the enhanced efficiency. Due to the nature of this effect, the THz emission efficiency is almost independent of the pump laser polarization. Compared to the plasmonic effect, these effects work under relaxed device fabrication and operating conditions.

An Alternative Phase-Sensitive THz Imaging Technique for Art Conservation: History and New Developments at the ENEA Center of Frascati

In recent years, THz imaging techniques have been used in several fields of application. At the beginning of the century, the low availability of powerful THz sources was one of the limiting factors to the advancement of THz technology. At the ENEA center in Frascati, two Free Electron Lasers (FELs) operating in the THz spectral region were available at that time, making it possible to exploit all the features of THz imaging. In this paper, we will describe an alternative THz imaging technique, developed over 15 years of studies at the ENEA center of Frascati, and its application in the art conservation field, reporting the latest results of such studies on the optical properties of pigments in the GHz-THz region of the spectrum, on the possibility of detecting biological weeds under mosaic tiles and on the THz analysis of ancient leather wallpapers. This alternative technique was first developed in the framework of a bilateral collaboration between Japan and Italy, the THz-ARTE Project, which involved NICT (Tokyo), NNRICP (Nara), ENEA (Frascati) and IFAC-CNR (Florence). Most of the THz imaging techniques at that time were based on THz-Time Domain (THz-TD) devices. In the paper will be described how this alternative technique is able to measure the phase of the reflected radiation, thus providing information on the optical properties of the materials under study, such as mural paintings and mosaics. This makes it possible to detect the presence of hidden artworks, additional elements under paint layers, and dielectric materials. To describe the potential and the limits of this alternative imaging technique we will start from a description of the first THz imaging setup at the ENEA center of Frascati, based upon a THz Free Electron Laser. A description of the theoretical principle underlying this technique will be given. The first results in the field of art conservation are summarized, while the new results of a systematic study on the optical properties of pigments are reported and the realization of a portable THz imaging device, and its application “on site” for the analysis of frescoes are shown. The success of this prototype lead to the identification of different types of artworks as possible targets to be studied. New results about the ability of detecting water, and possibly the water content of biological weeds, under mosaic tiles are described, while new experimental measurements on Leather Wallpapers, both “in situ” and in a laboratory environment, are discussed later. A final analysis on the pro and the cons of this alternative imaging technique and on its possible utilization with the developed prototype is carried out together with the considerations on possible future developments and its potential use as an extension of other imaging techniques.

Recognition of coal from other minerals in powder form using terahertz spectroscopy

Currently a significant fraction of the world energy is still produced from the combustion of mineral coal. The extraction of coal from mines is a relatively complex and dangerous activity that still requires the intervention of human miners, and therefore in order to minimize risks, automation of the coal mining process is desirable. An aspect that is still under investigation is potential techniques that can recognize on-line if the mineral being extracted from the mine is coal or if it is the surrounding rock. In this contribution we present the proof of concept of a method that has potential for recognition of the extraction debris from mining based on their terahertz transmission.

A THz transparent 3D printed microfluidic cell for small angle x-ray scattering

Excitation frequencies in the terahertz (THz) range are expected to lead to functionally relevant domain movements within the biological macromolecules such as proteins. The possibility of examining such movements in an aqueous environment is particularly valuable since here proteins are not deprived of any motional degrees of freedom. Small angle x-ray scattering (SAXS) is a powerful method to study the structure and domain movements of proteins in solution. Here, we present a microfluidic cell for SAXS experiments, which is also transparent for THz radiation. Specifically, cell dimensions and material were optimized for both radiation sources. In addition, the polystyrene cell can be 3D printed and easily assembled. We demonstrate the practicality of our design for SAXS measurements on several proteins in solution.

Generation of 0.7 mJ multicycle 15 THz radiation by phase-matched optical rectification in lithium niobate

We demonstrate efficient multicycle terahertz pulse generation at 14.6 THz from large-area lithium niobate crystals by using high-energy (up to 2 J) femtosecond Ti:sapphire laser pulses. Such terahertz radiation is produced by phase-matched optical rectification in lithium niobate. Experimentally, we achieve maximal terahertz energy of 0.71 mJ with conversion efficiency of ∼0.04%. Our experimental setup is simple and easily upscalable to produce multi-millijoule, multicycle terahertz radiation with proper lithium niobate crystals.

Application of Terahertz Spectroscopy to Rubber Products: Evaluation of Vulcanization and Silica Macro Dispersion

Industrial applications of terahertz (THz) technology are becoming more widespread. In particular, novel evaluation methods for essential rubber products are being developed. THz absorbance spectra of various rubber polymers and reagents enable visualization of filler dispersions and vulcanization reactions. Here, improved visualization of the vulcanization reaction in thick rubber samples is discussed. Silica macro-dispersion is also analyzed because it is a general filler in automobile tires and has been difficult to evaluate with conventional techniques.

Enhancing terahertz molecular fingerprint detection by a dielectric metagrating

Terahertz (THz) sensing of molecular fingerprint enables wide applications in biomedicine and security detection. Conventional detection approaches face big barriers in trace analysis of analyte due to the difficulties of enhancing the broadband molecular absorption. In order to achieve strong broadband wave-matter interaction for the analyte, we propose a method based on THz wave angular scanning on a dielectric metagrating. In virtue of the guided-mode resonance, one can strengthen the local electric field in various trace-amount analytes by tuning the polarization and incident angle, which leads to significant enhancement on the broadband signal of molecular fingerprint. The study paves the way for more applications of THz trace-amount detection.

Light-Induced Currents at Domain Walls in Multiferroic BiFeO3

Multiferroic BiFeO₃ (BFO) films with spontaneously formed periodic stripe domains can generate above-gap open circuit voltages under visible light illumination; nevertheless the underlying mechanism behind this intriguing optoelectronic response has not been understood to date. Here, we make contact-free measurements of light-induced currents in epitaxial BFO films via detecting terahertz radiation emanated by these currents, enabling a direct probe of the intrinsic charge separation mechanisms along with quantitative measurements of the current amplitudes and their directions. In the periodic stripe samples, we find that the net photocurrent is dominated by the charge separation across the domain walls, whereas in the monodomain samples the photovoltaic response arises from a bulk shift current associated with the non-centrosymmetry of the crystal. The peak current amplitude driven by the charge separation at the domain walls is found to be 2 orders of magnitude higher than the bulk shift current response, indicating the prominent role of domain walls acting as nanoscale junctions to efficiently separate photogenerated charges in the stripe domain BFO films. These findings show that domain-wall-engineered BFO thin films offer exciting prospects for ferroelectric-based optoelectronics, as well as bias-free strong terahertz emitters.

Coulomb decay rates in monolayer doped graphene

Excited conduction electrons, conduction holes, and valence holes in monolayer electron-doped graphene exhibit unusual Coulomb decay rates. The deexcitation processes are studied using the screened exchange energy. They might utilize the intraband and interband single-particle excitations, as well as the plasmon modes, depending on the quasiparticle states and the Fermi energies. The low-lying valence holes can decay through the undamped acoustic plasmon, so that they present very fast Coulomb deexcitations, nonmonotonous energy dependence, and anisotropic behavior. However, the low-energy conduction electrons and holes are similar to those in a two-dimensional electron gas. The higher-energy conduction states and the deeper-energy valence ones behave similarly in the available deexcitation channels and have a similar dependence of decay rate on the wave vector.

Resolution and contrast in terahertz pulse time-domain holographic reconstruction

Here, we present a comprehensive study of the reconstruction quality in terahertz (THz) pulse time-domain holography. We look into single wavelength reconstructions, as well as broadband recovery enabled by the ultrabroadband nature of radiation and coherent detection enabled by electro-optic or photoconductive sensing. We demonstrate the transverse resolution dependence for amplitude and phase objects on the solid angle of the inline recorded time-domain THz hologram, and then turn to the contrast of reconstructed binary amplitude objects, and further to longitudinal resolution of phase objects. We show that transverse resolution can reach values comparable to the wavelength of the radiation used, and longitudinally, phase objects can be resolved with even greater precision. We compare the obtained resolution with theoretical estimates and show that THz pulse time-domain holography is a powerful non-contact imaging tool.

Computed terahertz near-field mapping of molecular resonances of lactose stereo-isomer impurities with sub-attomole sensitivity

Terahertz near-field microscopy (THz-NFM) could locally probe low-energy molecular vibration dynamics below diffraction limits, showing promise to decipher intermolecular interactions of biomolecules and quantum matters with unique THz vibrational fingerprints. However, its realization has been impeded by low spatial and spectral resolutions and lack of theoretical models to quantitatively analyze near-field imaging. Here, we show that THz scattering-type scanning near-field optical microscopy (THz s-SNOM) with a theoretical model can quantitatively measure and image such low-energy molecular interactions, permitting computed spectroscopic near-field mapping of THz molecular resonance spectra. Using crystalline-lactose stereo-isomer (anomer) mixtures (i.e., α-lactose (≥95%, w/w) and β-lactose (≤4%, w/w)), THz s-SNOM resolved local intermolecular vibrations of both anomers with enhanced spatial and spectral resolutions, yielding strong resonances to decipher conformational fingerprint of the trace β-anomer impurity. Its estimated sensitivity was ~0.147 attomoles in ~8 × 10⁻⁴ μm³ interaction volume. Our THz s-SNOM platform offers a new path for ultrasensitive molecular fingerprinting of complex mixtures of biomolecules or organic crystals with markedly enhanced spatio-spectral resolutions. This could open up significant possibilities of THz technology in many fields, including biology, chemistry and condensed matter physics as well as semiconductor industries where accurate quantitative mappings of trace isomer impurities are critical but still challenging.

Iris-assisted terahertz field-induced second-harmonic generation in air

Terahertz field-induced second-harmonic generation (TFISH) is a technique for optical detection of broadband THz fields. We show that by placing an iris at the interaction volume of the THz and optical fields, the TFISH signal increases by several tenfold in atmospheric air. The iris-assisted TFISH amplification is characterized at varying air pressures and probe intensities and provides an elegant platform for studying nonlinear phase matching in the gas phase.

Slow Hot-Carrier Cooling in Halide Perovskites: Prospects for Hot-Carrier Solar Cells

Rapid hot-carrier cooling is a major loss channel in solar cells. Thermodynamic calculations reveal a 66% solar conversion efficiency for single junction cells (under 1 sun illumination) if these hot carriers are harvested before cooling to the lattice temperature. A reduced hot-carrier cooling rate for efficient extraction is a key enabler to this disruptive technology. Recently, halide perovskites emerge as promising candidates with favorable hot-carrier properties: slow hot-carrier cooling lifetimes several orders of magnitude longer than conventional solar cell absorbers, long-range hot-carrier transport (up to ≈600 nm), and highly efficient hot-carrier extraction (up to ≈83%). This review presents the developmental milestones, distills the complex photophysical findings, and highlights the challenges and opportunities in this emerging field. A developmental toolbox for engineering the slow hot-carrier cooling properties in halide perovskites and prospects for perovskite hot-carrier solar cells are also discussed.

Industrial Applications of Terahertz Sensing: State of Play

This paper is a survey of existing and upcoming industrial applications of terahertz technologies, comprising sections on polymers, paint and coatings, pharmaceuticals, electronics, petrochemicals, gas sensing, and paper and wood industries. Finally, an estimate of the market size and growth rates is given, as obtained from a comparison of market reports.

Contact-free conductivity probing of metal nanowire films using THz reflection spectroscopy

We utilize time-domain Terahertz (THz) reflectivity measurements for characterizing the surface conductivity of Polyethylene-terephthalate coated with nanowire (NW) films to form novel transparent electrodes (TE). We find good correspondence between the film conductivity and the THz-field reflectivity that provide uniquely desirable means for non-destructive, contactless conductivity measurements of large area NW-based-TEs. We demonstrate the robustness of THz reflectivity measurements to deviations invoked on NW film composition and film uniformity. The dependence of THz reflectivity on area NW coverage follows an anisotropic effective medium model for the dielectric constant.

Photon diagnostics at the FLASH THz beamline

The THz beamline at FLASH, DESY, provides both tunable (1-300 THz) narrow-bandwidth (∼10%) and broad-bandwidth intense (up to 150 uJ) THz pulses delivered in 1 MHz bursts and naturally synchronized with free-electron laser X-ray pulses. Combination of these pulses, along with the auxiliary NIR and VIS ultrashort lasers, supports a plethora of dynamic investigations in physics, material science and biology. The unique features of the FLASH THz pulses and the accelerator source, however, bring along a set of challenges in the diagnostics of their key parameters: pulse energy, spectral, temporal and spatial profiles. Here, these challenges are discussed and the pulse diagnostic tools developed at FLASH are presented. In particular, a radiometric power measurement is presented that enables the derivation of the average pulse energy within a pulse burst across the spectral range, jitter-corrected electro-optical sampling for the full spectro-temporal pulse characterization, spatial beam profiling along the beam transport line and at the sample, and a lamellar grating based Fourier transform infrared spectrometer for the on-line assessment of the average THz pulse spectra. Corresponding measurement results provide a comprehensive insight into the THz beamline capabilities.

Improved electrode design for interdigitated large-area photoconductive terahertz emitters

We study here the effect of the electrode parameters on the terahertz emission efficiency of large-area emitters based on interdigitated electrodes. Electrode parameters are optimized to get maximum terahertz emission by optimizing the balance condition among the emission efficiency of individual electrode pairs, number of emitters per unit area, and fraction of semiconductor exposed for optical pumping. A maximum enhancement by about 50% in the peak to peak electric field is observed as compared to the previous state of the art design.

Integration of a rapid scanning technique into THz time-domain spectrometers for nonlinear THz spectroscopy measurements

We have implemented a rapid scanning technique into THz time-domain spectrometers using an oscillating frictionless delay line, especially adapted for nonlinear THz experiments. Thereby we were able to increase the dynamic range of THz measurements in the frequency range from 40 to 200 cm-1 by up to 24 dB and reduce the scanning time by up to a factor of 200. We report here test measurements on TDS-setups at repetition rates of 80 MHz and 5 kHz. The dynamic range exceeds 64 dB, which allows to record even small changes in the THz absorption upon optical excitation by a THz probe, covering the frequency range of the intermolecular modes and the phonon bands. We demonstrate the potential of this technique for optical-pump THz-probe experiments using a 70 μm thick high-resistivity silicon, excited by 400 nm, ∼50 fs pulses as a sample.

Electric and Magnetic Hotspots via Hollow InSb Microspheres for Enhanced Terahertz Spectroscopy

We study electric and magnetic hotspots in the gap between hollow InSb microspheres forming dimers and trimers. The outer radius, core volume fraction, distance, and temperature of the microspheres can be chosen to achieve field enhancement at a certain frequency corresponding to the transition between energy levels of a molecule placed in the gap. For example, utilizing 80 μm radius spheres at a gap of 2 μm held at a temperature of 295 K, allow electric field intensity enhancements of 10-2880 and magnetic field intensity enhancements of 3-61 in the frequency window 0.35-1.50 THz. The core volume fraction and the ambient temperature affect the enhancements, particularly in the frequency window 1.5-2 THz. Electric and magnetic hotspots are promising for THz absorption and circular dichroism spectroscopy.

Positive and Negative Symmetric Pulses with Fast Rising Edge Generated from a GaAs Photoconductive Semiconductor Switch

In this paper, the positive and negative symmetric pulses with a fast rising edge were generated by a GaAs photoconductive semiconductor switch (PCSS). When the GaAs PCSS was biased at 2.0 kV and triggered by a femtosecond laser pulse with a pulse energy of 97.5 J, the peak voltages of the positive and negative pulses were 1.313 kV and 1.329 kV, respectively, and the rise times were 174 ps and 164 ps, respectively. Moreover, the GaAs PCSS presents good stability. The experimental results show that GaAs PCSSs can meet the requirement of a femtosecond streak camera.

Theory and practice of modeling van der Waals interactions in electronic-structure calculations

The accurate description of long-range electron correlation, most prominently including van der Waals (vdW) dispersion interactions, represents a particularly challenging task in the modeling of molecules and materials. vdW forces arise from the interaction of quantum-mechanical fluctuations in the electronic charge density. Within (semi-)local density functional approximations or Hartree-Fock theory such interactions are neglected altogether. Non-covalent vdW interactions, however, are ubiquitous in nature and play a key role for the understanding and accurate description of the stability, dynamics, structure, and response properties in a plethora of systems. During the last decade, many promising methods have been developed for modeling vdW interactions in electronic-structure calculations. These methods include vdW-inclusive Density Functional Theory and correlated post-Hartree-Fock approaches. Here, we focus on the methods within the framework of Density Functional Theory, including non-local van der Waals density functionals, interatomic dispersion models within many-body and pairwise formulation, and random phase approximation-based approaches. This review aims to guide the reader through the theoretical foundations of these methods in a tutorial-style manner and, in particular, highlight practical aspects such as the applicability and the advantages and shortcomings of current vdW-inclusive approaches. In addition, we give an overview of complementary experimental approaches, and discuss tools for the qualitative understanding of non-covalent interactions as well as energy decomposition techniques. Besides representing a reference for the current state-of-the-art, this work is thus also designed as a concise and detailed introduction to vdW-inclusive electronic structure calculations for a general and broad audience.

Spectroscopic methods for assessing the molecular origins of macroscopic solution properties of highly concentrated liquid protein solutions

In cases of subcutaneous injection of therapeutic monoclonal antibodies, high protein concentrations (>50 mg/ml) are often required. During the development of these high concentration liquid formulations (HCLF), challenges such as aggregation, gelation, opalescence, phase separation, and high solution viscosities are more prone compared to low concentrated protein formulations. These properties can impair manufacturing processes, as well as protein stability and shelf life. To avoid such unfavourable solution properties, a detailed understanding about the nature of these properties and their driving forces are required. However, the fundamental mechanisms that lead to macroscopic solution properties, as above mentioned, are complex and not fully understood, yet. Established analytical methods for assessing the colloidal stability, i.e. the ability of a native protein to remain dispersed in solution, are restricted to dilute conditions and provide parameters such as the second osmotic virial coefficient, B₂₂, and the diffusion interaction coefficient, k_D. These parameters are routinely applied for qualitative estimations and identifications of proteins with challenging solution behaviours, such as high viscosities and aggregation, although the assays are prepared for low protein concentration conditions, typically between 0.1 and 20 mg/ml ("ideal" solution conditions). Quantitative analysis of samples of high protein concentration is difficult and it is hard to obtain information about the driving forces of such solution properties and corresponding protein-protein self-interactions. An advantage of using specific spectroscopic methods is the potential of directly analysing highly concentrated protein solutions at different solution conditions. This allows for collecting/gaining valuable information about the fundamental mechanisms of solution properties of the high protein concentration regime. In addition, the derived parameters might be more predictive as compared to the parameters originating from assays which are optimized for the low protein concentration range. The provided information includes structural data, molecular dynamics at various timescales and protein-solvent interactions, which can be obtained at molecular resolution. Herein, we provide an overview about spectroscopic techniques for analysing the origins of macroscopic solution behaviours in general, with a specific focus on pharmaceutically relevant high protein concentration and formulation conditions.

Photometrics of ultrafast and fast broadband electronic transient absorption spectroscopy: State of the art

The physical limits of the photometric resolution in broadband electronic transient absorption spectroscopy are discussed together with solutions for how to reach these limits in practice. In the first part, quantitative expressions for the noise contributions to the transient absorption signal are derived and experimentally tested. Experimental approaches described in the literature are discussed and compared on this basis. Guide-lines for designing a setup are established. In the second part, a method for obtaining nearly shot-noise limited kinetics with photometric resolution of the order of 100 μOD in overall measurement times of a few minutes from femtosecond to microsecond time scale is presented. The results are discussed in view of other experiments of step-scan type which are subject to a background or to correlated noise. Finally, detailed information is provided on how to obtain transient absorption spectra where counting statistics are the sole source of noise. A method for how to suppress outliers without introducing bias is discussed. An application example is given to demonstrate the achievable signal-to-noise level and the fast acquisition time.