Kinetic isotope effects in the study of organometallic reaction mechanisms

Proton vs Electron: The Dual Role of Redox-Inactive Metal Ions in Permanganate Oxidation Kinetics

Redox-inactive metal-ion-driven modulation of the oxidation behavior of high-valent metal-oxo complex has garnered significant interest in biological and chemical synthesis; however, their role in permanganate (Mn(VII)) oxidation for the removal of organic pollutants has been largely neglected. Here, we uncover the impact of six metal ions (i.e., Ca2+, Mg2+, Ni2+, Zn2+, Al3+, and Sc3+) presenting in water environments on Mn(VII) activity. These ions uniformly boost the electron and oxygen transfer capabilities of Mn(VII) while impeding proton transfer, as evidenced by electrochemical tests, thioanisole probe analysis, and the kinetic isotope effect. The observed effects are intricately linked to the Lewis acidity of the metal ions. Further mechanistic insights reveal that Mn(VII) can interact with metal ions without direct reduction. Such interactions modify the electronic configuration of Mn(VII) and create an acidic microenvironment, thus increasing its electrophilicity and the energy barrier for the abstraction of proton from organic substrates. More importantly, the efficacy of Mn(VII) in removing phenolic pollutants is regulated by these ions through changing the driving force for proton and electron transfer, i.e., facilitated at pH > 4.5 and inhibited at lower pH. The contribution of active Mn intermediates is also discussed to reveal the oxidative mechanism of the metal ion/Mn(VII) system. These findings not only facilitate the rational design of Mn(VII) oxidation conditions in the presence of metal ions for water decontamination but also offer an alternative paradigm for enhancing electrophilic oxidation.

Overlooked Complexation and Competition Effects of Phenolic Contaminants in a Mn(II)/Nitrilotriacetic Acid/Peroxymonosulfate System: Inhibited Generation of Primary and Secondary High-Valent Manganese Species

Organic contaminants with lower Hammett constants are typically more prone to being attacked by reactive oxygen species (ROS) in advanced oxidation processes (AOPs). However, the interactions of an organic contaminant with catalytic centers and participating ROS are complex and lack an in-depth understanding. In this work, we observed an abnormal phenomenon in AOPs that the degradation of electron-rich phenolics, such as 4-methoxyphenol, acetaminophen, and 4-presol, was unexpectedly slower than electron-deficient phenolics in a Mn(II)/nitrilotriacetic acid/peroxymonosulfate (Mn(II)/NTA/PMS) system. The established quantitative structure-activity relationship revealed a volcano-type dependence of the degradation rates on the Hammett constants of pollutants. Leveraging substantial analytical techniques and modeling analysis, we concluded that the electron-rich phenolics would inhibit the generation of both primary (Mn(III)NTA) and secondary (Mn(V)NTA) high-valent manganese species through complexation and competition effects. Specifically, the electron-rich phenolics would form a hydrogen bond with Mn(II)/NTA/PMS through outer-sphere interactions, thereby reducing the electrophilic reactivity of PMS to accept the electron transfer from Mn(II)NTA, and slowing down the generation of reactive Mn(III)NTA. Furthermore, the generated Mn(III)NTA is more inclined to react with electron-rich phenolics than PMS due to their higher reaction rate constants (8314 ± 440, 6372 ± 146, and 6919 ± 31 M-1 s-1 for 4-methoxyphenol, acetaminophen, and 4-presol, respectively, as compared with 671 M-1 s-1 for PMS). Consequently, the two-stage inhibition impeded the generation of Mn(V)NTA. In contrast, the complexation and competition effects are insignificant for electron-deficient phenolics, leading to declined reaction rates when the Hammett constants of pollutants increase. For practical applications, such complexation and competition effects would cause the degradation of electron-rich phenolics to be more susceptible to water matrixes, whereas the degradation of electron-deficient phenolics remains largely unaffected. Overall, this study elucidated the intricate interaction mechanisms between contaminants and reactive metal species at both the electronic and kinetic levels, further illuminating their implications for practical treatment.

Hydrogen evolution driven by heteroatoms of bidentate N-heterocyclic ligands in iron(II) complexes

While Pt is considered the best catalyst for the electrocatalytic hydrogen evolution reaction (HER), it is evident that non-noble metal alternatives must be explored. In this regard, it is well known that the binding sites for non-noble metals play a pivotal role in facilitating efficient catalysis. Herein, we studied Fe(II) complexes with bidentate 2-(2'-pyridyl)benzoxazole (LO), 2-(2'-pyridyl)benzthiazole (LS), 2-(2'-pyridyl)benzimidazole (LNH), and 2-2'-bipyridyl (Lpy) ligands - by adding trifluoroacetic acid (TFA) to their acetonitrile solution - in order to examine how their reactivity towards protons under reductive conditions could be impacted by the non-coordinating heteroatoms (S, O, N, or none). By applying this ligand series, we found that the reduction potentials relevant for HER correlate with ligand basicity in the presence of TFA. Moreover, DFT calculations underlined the importance of charge distribution in the ligand-based LUMO and LUMO+1 orbitals of the complexes, dependent on the heterocycle. Kinetic studies and controlled potential electrolysis - using TFA as a proton source - revealed HER activities for the complexes with LNH, LO, and LS of kobs = 0.03, 1.1, and 10.8 s-1 at overpotentials of 0.81, 0.76, and 0.79 V, respectively, and pointed towards a correlation between the kinetics of the reaction and the non-coordinating heteroatoms of the ligands. In particular, the activity was associated with the [Fe(LS/O/NH)2(S)2]2+ form (S = solvent or substrate molecule), and the rate-determining step involved the formation of [Fe(H-H)]+, during the weakening of Fe-H and CF3CO2-H bonds, according to the experimental and DFT results.

Mechanistic Analysis of 5-Hydroxy γ-Pyrones as Michael Acceptor Prodrugs

Substituted 5-hydroxy γ-pyrones have shown promise as covalent inhibitor leads against cysteine proteases and transcription factors, but their hydrolytic instability has hindered optimization efforts. Previous mechanistic proposals have suggested that these molecules function as Michael acceptor prodrugs, releasing a leaving group to generate an o-quinone methide-like structure. Addition to this electrophile of either water or an active site cysteine was purported to lead to inhibitor hydrolysis or enzyme inhibition, respectively. Through the use of kinetic nuclear magnetic resonance experiments, Hammett analysis, kinetic isotope effect studies, and density functional theory calculations, our findings suggest that enzyme inhibition and hydrolysis proceed by distinct pathways and are differentially influenced by substituent electronics. This mechanistic revision helps enable a more rational optimization for this class of promising compounds.

Catalytic Asymmetric Dearomative [2 + 2] Photocycloaddition/Ring-Expansion Sequence of Indoles with Diversified Alkenes

Developing novel strategies for catalytic asymmetric dearomatization (CADA) reactions is highly valuable. Visible light-mediated photocatalysis is demonstrated to be a powerful tool to activate aromatic compounds for further synthetic transformations. Herein, a catalytic asymmetric dearomative [2 + 2] photocycloaddition/ring-expansion sequence of indoles with simple alkenes was reported, providing a facile access to enantioenriched cyclopenta[b]indoles with good to high yields and enantioselectivities by means of chiral lanthanide photocatalysis. This protocol exhibited a broad substrate scope and good functional group tolerance, as well as potential applications in the synthesis of bioactive molecules. Mechanistic studies, including control experiments, UV-vis absorption spectroscopy, emission spectroscopy, and DFT calculations, were carried out, shedding insights into the reaction mechanism and the origin of enantioselectivity.

Repurposing a supramolecular iridium catalyst via secondary Zn⋯O[double bond, length as m-dash]C weak interactions between the ligand and substrate leads to ortho-selective C(sp2)-H borylation of benzamides with unusual kinetics

The iridium-catalyzed C-H borylation of benzamides typically leads to meta and para selectivities using state-of-the-art iridium-based N,N-chelating bipyridine ligands. However, reaching ortho selectivity patterns requires extensive trial-and-error screening via molecular design at the ligand first coordination sphere. Herein, we demonstrate that triazolylpyridines are excellent ligands for the selective iridium-catalyzed ortho C-H borylation of tertiary benzamides and, importantly, we demonstrate the almost negligible effect of the first coordination sphere in the selectivity, which is so far unprecedented in iridium C-H bond borylations. Remarkably, the activity is dramatically enhanced by exploiting a remote Zn⋯O[double bond, length as m-dash]C weak interaction between the substrate and a rationally designed molecular-recognition site in the catalyst. Kinetic studies and DFT calculations indicate that the iridium-catalyzed C-H activation step is not rate-determining, this being unique for remotely controlled C-H functionalizations. Consequently, a previously established supramolecular iridium catalyst designed for meta-borylation of pyridines is now compatible with the ortho-borylation of benzamides, a regioselectivity switch that is counter-intuitive regarding precedents in the literature. In addition, we highlight the role of the cyclohexene additive in avoiding the formation of undesired side-products as well as accelerating the HBpin release event that precedes the catalyst regeneration step, which is highly relevant for the design of powerful and selective iridium borylating catalysts.

Kinetic Isotope Effects and the Mechanism of CO2 Insertion into the Metal-Hydride Bond of fac-(bpy)Re(CO)3H

The 1,2-insertion reaction of CO2 into metal-hydride bonds of d6-octahedral complexes to give κ1-O-metal-formate products is the key step in various CO2 reduction schemes and as a result has attracted extensive mechanistic investigations. For many octahedral catalysts, CO2 insertion follows an associative mechanism in which CO2 interacts directly with the coordinated hydride ligand instead of the more classical dissociative mechanism that opens an empty coordination site to bind the substrate to the metal prior to a hydride migration step. To better understand the associative mechanism, we conducted a systematic quantum chemical investigation on the reaction between CO2 and fac-(bpy)Re(CO)3H (1-Re-H; bpy = 2,2'-bipyridine) starting with the gas phase and then moving to THF and other solvents with increased dielectric constants. Detailed analyses of the potential energy surfaces (PESs) and intrinsic reaction coordinates (IRCs) reveal that the reaction is enabled in all media by an initial stage of making a 3c-2e bond between the carbon of CO2 and the metal-hydride bond that is most consistent with an organometallic bridging hydride Re-H-CO2 species. Once CO2 is bent and anchored to the metal-hydride bond, the reaction proceeds by a rotation motion via a cyclic transition state TS2 that interchanges Re-H-CO2 and Re-O-CHO coordination. The combined stages provide an asynchronous-concerted pathway for CO2 insertion on the Gibbs free energy surface with TS2 as the highest energy point. Consideration of TS2 as a rate-determining TS gives activation barriers, inverse KIEs, substituent effects, and solvent effects that agree with the experimental data available in this system. An important new insight revealed by the analyses of the results is that the initial stage of the reaction is not a hydride transfer step as has been assumed in some studies. In fact, the loose vibration of the TS that can be identified for the first stage of the reaction in solution (TS1) does not involve the Re-H stretching vibrational mode. Accordingly, the imaginary frequency of TS1 is insensitive to deuteration, and therefore, TS1 leads to no significant KIE.

Inverse Isotope Kinetic Effect of the Charge Transfer Reactions of Ar+ with H2O and D2O

Hydrogen isotopic effect, as the key to revealing the origin of Earth's water, arises from the H/D mass difference and quantum dynamics at the transition state of reaction. The ion-molecule charge-exchange reaction between water (H2O/D2O) and argon ion (Ar+) proceeds spontaneously and promptly, where there is no transition-state or intermediate complex. In this energetically resonant process, we find an inverse kinetic isotope effect (KIE) leading to the higher charge transfer rate for D2O, by the velocity map imaging measurements of H2O+/D2O+ products. Using the average dipole orientation capture model, we estimate the orientation angles of C2v axis of H2O/D2O relative to the Ar+ approaching direction and attribute to the difference of stereodynamics. According to the long-distance Landau-Zener charge transfer model, this inverse KIE could be also attributed to the density-of-state difference of molecular bending motion between H2O+ and D2O+ around the resonant charge transfer.

Accessing Z-Enynes via Cobalt-Catalyzed Propargylic Dehydrogenation

Alkenes constitute an enabling motif in organic synthesis, as they can be functionalized to form highly substituted molecules. Z-alkenes are generally challenging to access due to the thermodynamic preference for the formation of E-alkenes compared to Z-alkenes. Dehydrogenation methodologies to selectively form Z-alkenes have not yet been reported. Herein, we report a Z-selective, propargylic dehydrogenation that provides 1,3-enynes through the invention of a Co-catalyzed oxidation system. Observation of a kinetic isotope effect (KIE) revealed that deprotonation of the propargylic position is the rate limiting step. Additionally, isomerization experiments were conducted and confirmed that the observed Z-selectivity is a kinetic effect. A proposed stereomechanistic model for the Z-selectivity is included.

Trajectory-Based Time-Resolved Mechanism for Benzene Reductive Elimination from Cyclopentadienyl Mo/W Phenyl Hydride Complexes

Calculated potential energy structures and landscapes are very often used to define the sequence of reaction steps in an organometallic reaction mechanism and interpret kinetic isotope effect (KIE) measurements. Underlying most of this structure-to-mechanism translation is the use of statistical rate theories without consideration of atomic/molecular motion. Here we report direct dynamics simulations for an organometallic benzene reductive elimination reaction, where nonstatistical intermediates and dynamic-controlled pathways were identified. Specifically, we report single spin state as well as mixed spin state quasiclassical direct dynamics trajectories in the gas phase and explicit solvent for benzene reductive elimination from Mo and W bridged cyclopentadienyl phenyl hydride complexes ([Me2Si(C5Me4)2]M(H)(Ph), M = Mo and W). Different from the energy landscape mechanistic sequence, the dynamics trajectories revealed that after the benzene C-H bond forming transition state (often called reductive coupling), σ-coordination and π-coordination intermediates are either skipped or circumvented and that there is a direct pathway to forming a spin flipped solvent caged intermediate, which occurs in just a few hundred femtoseconds. Classical molecular dynamics simulations were then used to estimate the lifetime of the caged intermediate, which is between 200 and 400 picoseconds. This indicates that when the η2-π-coordination intermediate is formed, it occurs only after the first formation of the solvent-caged intermediate. This dynamic mechanism intriguingly suggests the possibility that the solvent-caged intermediate rather than a coordination intermediate is responsible (or partially responsible) for the inverse KIE value experimentally measured for W. Additionally, this dynamic mechanism prompted us to calculate the kH/kD KIE value for the C-H bonding forming transition states of Mo and W. Surprisingly, Mo gave a normal value, while W gave an inverse value, albeit small, due to a much later transition state position.

High-valent metal-oxo species transformation and regulation by co-existing chloride: Reaction pathways and impacts on the generation of chlorinated by-products

High-valent metal-oxo species (HMOS) have been extensively recognized in advanced oxidation processes (AOPs) owing to their high selectivity and high chemical utilization efficiency. However, the interactions between HMOS and halide ions in sewage wastewater are complicated, leading to ongoing debates on the intrinsic reactive species and impacts on remediation. Herein, we prepared three typical HMOS, including Fe(IV), Mn(V)-nitrilotriacetic acid complex (Mn(V)NTA) and Co(IV) through peroxymonosulfate (PMS) activation and comparatively studied their interactions with Cl- to reveal different reactive chlorine species (RCS) and the effects of HMOS types on RCS generation pathways. Our results show that the presence of Cl- alters the cleavage behavior of the peroxide OO bond in PMS and prohibits the generation of Fe(IV), spontaneously promoting SO4•- production and its subsequent transformation to secondary radicals like Cl• and Cl2•-. The generation and oxidation capacity of Mn(V)NTA was scarcely influenced by Cl-, while Cl- would substantially consume Co(IV) and promote HOCl generation through an oxygen-transfer reaction, evidenced by density functional theory (DFT) and deuterium oxide solvent exchange experiment. The two-electron-transfer standard redox potentials of Fe(IV), Mn(V)NTA and Co(IV) were calculated as 2.43, 2.55 and 2.85 V, respectively. Due to the different reactive species and pathways in the presence of Cl-, the amounts of chlorinated by-products followed the order of Co(II)/PMS > Fe(II)/PMS > Mn(II)NTA/PMS. Thus, this work renovates the knowledge of halide chemistry in HMOS-based systems and sheds light on the impact on the treatment of salinity-containing wastewater.

Synthesis of Deuterated Compounds by Flow Chemistry

Development of the efficient and practical method for the synthesis of deuterated compounds which occupies the broadest area among stable isotopes is one of the most essential issues toward the industrial advance and building a sustainable society. This review describes recent advances in deuteration reactions, where the continuous flow chemistry plays pivotal roles for the successful installation of deuterium atom into diverse organic frameworks, opening new fields of isotope-based synthetic chemistry.

Enantioselective Access to β-Amino Carbonyls via Ni-Catalyzed Formal Olefin Hydroamidation

We herein describe a Ni-catalyzed formal hydroamidation of readily available α,β-unsaturated carbonyl compounds to afford valuable chiral β-amino acid derivatives (up to >99:1 e.r.) using dioxazolones as a robust amino source. A wide range of alkyl-substituted olefins conjugated to esters, amides, thioesters, and ketones were successfully amidated at the β-position with excellent enantioselectivity for the first time. Combined experimental and computational mechanistic studies supported our working hypothesis that this unconventional β-amidation of unsaturated carbonyl substrates can be attributed to the polar-matched migratory olefin insertion of an (amido)(Cl)NiII intermediate, in situ generated from the dioxazolone precursor.

Stereodivergent, Kinetically Controlled Isomerization of Terminal Alkenes via Nickel Catalysis

Because internal alkenes are more challenging synthetic targets than terminal alkenes, metal-catalyzed olefin mono-transposition (i.e., positional isomerization) approaches have emerged to afford valuable E- or Z- internal alkenes from their complementary terminal alkene feedstocks. However, the applicability of these methods has been hampered by lack of generality, commercial availability of precatalysts, and scalability. Here, we report a nickel-catalyzed platform for the stereodivergent E/Z-selective synthesis of internal alkenes at room temperature. Commercial reagents enable this one-carbon transposition of terminal alkenes to valuable E- or Z-internal alkenes via a Ni-H-mediated insertion/elimination mechanism. Though the mechanistic regime is the same in both systems, the underlying pathways that lead to each of the active catalysts are distinct, with the Z-selective catalyst forming from comproportionation of an oxidative addition complex followed by oxidative addition with substrate and the E-selective catalyst forming from protonation of the metal by the trialkylphosphonium salt additive. In each case, ligand sterics and denticity control stereochemistry and prevent over-isomerization.

Dinuclear Titanium(III)-Catalyzed Radical-Type Kinetic Resolution of Epoxides for the Enantioselective Synthesis of cis-Glycidic Esters

Glycidic esters represent pivotal constituents in synthetic chemistry, offering enhanced versatility for tailoring toward a diverse array of molecular targets in comparison with simple epoxides. While considerable progress has been made in the asymmetric synthesis of trans- and trisubstituted glycidic esters, achieving enantioselective preparation of cis-glycidic esters has remained a long-standing challenge. Here, we demonstrate a selectivity-predictable modular platform for the asymmetric synthesis of cis-glycidic esters via a novel dinuclear (salen)titanium(III)-catalyzed radical-type kinetic resolution (KR) approach. This radical KR protocol operates under mild conditions and demonstrates a wide substrate scope, facilitating the synthesis of alkyl- and aryl-substituted cis-glycidic esters with high levels of regioselectivity and enantioselectivity, along with hydroxy ester byproducts representing synthetically valuable motifs as well. This study presents a unique exploration of radical-type KR applied to epoxides, effectively overcoming the steric challenges inherent in conventional nucleophilic-type methodologies typically employed in epoxide chemistry.

Synthesis of deuteriodifluoromethylthiolated isocoumarins-1-imines and isocoumarins enabled by multi-component reagents system (MCRS)

The combining use of BnSCF2D, mCPBA and Tf2O serves as an efficient multi-component reagents system (MCRS) for the synthesis of deuteriodifluoromethylthiolated isocoumarins-1-imines/isocoumarins via intramolecular cyclization/deuteriodifluoromethylthiolation of 2-alkynylbenzamides/2-alkynylbenzoates. The approach features the generation of the crucial reactive electrophilic sulfonium salt through a sequence process involving the oxidation of BnSCF2D by mCPBA followed by Tf2O promoted activation.

Copper-Catalyzed Site-Selective Electrophilic Aromatic Alkylation of Monosubstituted Simple Arenes

A copper-catalyzed highly para-selective electrophilic aromatic alkylation of monosubstituted simple arenes has been accomplished. This method provides a practical platform for the transformation from simple commercial arenes to well-defined di- and multisubstituted aromatics with high added value. Control experiments and DFT calculations reveal that the achievement of the excellent site-selectivity is ascribed to the controlled deprotonation of the Wheland intermediates. Remarkably, the type of alkylating regent has been shown to have a significant impact on site-selectivity.

Electroreduction of unactivated alkenes using water as hydrogen source

Herein, we report an electroreduction of unactivated alkyl alkenes enabled by [Fe]-H, which is provided through the combination of anodic iron salts and the silane generated in situ via cathodic reduction, using H2O as an H-source. The catalytic amounts of Si-additive work as an H-carrier from H2O to generate a highly active silane species in situ under continuous electrochemical conditions. This approach shows a broad substrate scope and good functional group compatibility. In addition to hydrogenation, the use of D2O instead of H2O provides the desired deuterated products in good yields with excellent D-incorporation (up to >99%). Further late-stage hydrogenation of complex molecules and drug derivatives demonstrate potential application in the pharmaceutical industry. Mechanistic studies are performed and provide support for the proposed mechanistic pathway.

The Conductance Isotope Effect in Oligophenylene Imine Molecular Wires Depends on the Number and Spacing of 13C-Labeled Phenylene Rings

We report a strong and structurally sensitive 13C intramolecular conductance isotope effect (CIE) for oligophenyleneimine (OPI) molecular wires connected to Au electrodes. Wires were built from Au surfaces beginning with the formation of 4-aminothiophenol self-assembled monolayers (SAMs) followed by subsequent condensation reactions with 13C-labeled terephthalaldehyde and phenylenediamine; in these monomers the phenylene rings were either completely 13C-labeled or the naturally abundant 12C isotopologues. Alternatively, perdeuterated versions of terephthalaldehyde and phenylenediamine were employed to make 2H(D)-labeled OPI wires. For 13C-isotopologues of short OPI wires (<4 nm) in length where the charge transport mechanism is tunneling, there was no measurable effect, i.e., 13C CIE ≈ 1, where CIE is defined as the ratio of labeled and unlabeled wire resistances, i.e., CIE = Rheavy/Rlight. However, for long OPI wires >4 nm, in which the transport mechanism is polaron hopping, a strong 13C CIE = 4-5 was observed. A much weaker inverse CIE < 1 was evident for the longest D-labeled wires. Importantly, the magnitude of the 13C CIE was sensitive to the number and spacing of 13C-labeled rings, i.e., the CIE was structurally sensitive. The structural sensitivity is intriguing because it may be employed to understand polaron hopping mechanisms and charge localization/delocalization in molecular wires. A preliminary theoretical analysis explored several possible explanations for the CIE, but so far a fully satisfactory explanation has not been identified. Nevertheless, the latest results unambiguously demonstrate structural sensitivity of the heavy atom CIE, offering directions for further utilization of this interesting effect.

Plastic wastes-derived N-doped carbon nanotubes for efficient removal of sulfamethoxazole in high salinity wastewater via nonradical peroxymonosulfate activation

Peroxymonosulfate (PMS) catalytic activation is effective to eliminate organic pollutants from water, thus the development of low-cost and efficient catalysts is significant in applications. The resource conversion of plastic wastes (PWs) into carbon nanotubes (CNTs) is a promising candidate for PMS-based advanced oxidation processes (AOPs), and also a sustainable strategy to realize plastic management and reutilization. Herein, cost-effective PWs-derived N-doped CNTs (N-pCNTs) were synthesized, which displayed efficient activity for PMS activation through an electron transfer pathway (ETP) for sulfamethoxazole (SMX) degradation in high salinity water. The pyrrolic N induced the positively charged surface of N-pCNTs, favoring the electrostatic adsorption of PMS and subsequent generation of active PMS* . A galvanic oxidation process was developed to prove the electron-shuttle dominated ETP for SMX oxidation. Combined with theoretical calculations, the efficiency of ETP was determined by the potential difference between HOMO of SMX and LUMO of N-pCNTs. Such oxidation produced low-toxicity intermediates and resulted in selective degradation of specific sulfonamide antibiotics. This work reveals the feasibility of low-cost N-pCNTs catalysts from PWs serving as an appealing candidate for PMS-AOPs in water remediation, providing a new solution to alleviate environmental issues caused by PWs and also advances the understanding of ETP during PMS activation.

Chemoselective umpolung of thiols to episulfoniums for cysteine bioconjugation

Cysteine conjugation is an important tool in protein research and relies on fast, mild and chemoselective reactions. Cysteinyl thiols can either be modified with prefunctionalized electrophiles, or converted into electrophiles themselves for functionalization with selected nucleophiles in an independent step. Here we report a bioconjugation strategy that uses a vinyl thianthrenium salt to transform cysteine into a highly reactive electrophilic episulfonium intermediate in situ, to enable conjugation with a diverse set of bioorthogonal nucleophiles in a single step. The reactivity profile can connect several nucleophiles to biomolecules through a short and stable ethylene linker, ideal for introduction of infrared labels, post-translational modifications or NMR probes. In the absence of reactive exogenous nucleophiles, nucleophilic amino acids can react with the episulfonium intermediate for native peptide stapling and protein-protein ligation. Ready synthetic access to isotopologues of vinyl thianthrenium salts enables applications in quantitative proteomics. Such diverse applications demonstrate the utility of vinyl-thianthrenium-based bioconjugation as a fast, selective and broadly applicable tool for chemical biology.

Comprehensive Mechanistic Analysis of Palladium- and Nickel-Catalyzed α,β-Dehydrogenation of Carbonyls via Organozinc Intermediates

Introducing degrees of unsaturation into small molecules is a central transformation in organic synthesis. A strategically useful category of this reaction type is the conversion of alkanes into alkenes for substrates with an adjacent electron-withdrawing group. An efficient strategy for this conversion has been deprotonation to form a stabilized organozinc intermediate that can be subjected to α,β-dehydrogenation through palladium or nickel catalysis. This general reactivity blueprint presents a window to uncover and understand the reactivity of Pd- and Ni-enolates. Within this context, it was determined that β-hydride elimination is slow and proceeds via concerted syn-elimination. One interesting finding is that β-hydride elimination can be preferred to a greater extent than C-C bond formation for Ni, more so than with Pd, which defies the generally assumed trends that β-hydride elimination is more facile with Pd than Ni. The discussion of these findings is informed by KIE experiments, DFT calculations, stoichiometric reactions, and rate studies. Additionally, this report details an in-depth analysis of a methodological manifold for practical dehydrogenation and should enable its application to challenges in organic synthesis.

Advances for Triangular and Sandwich-Shaped All-Metal Aromatics

Much experimental work has been contributed to all-metal σ, π and δ-aromaticity among transition metals, semimetallics and other metals in the past two decades. Before our focused investigations on the properties of triangular and sandwich-shaped all-metal aromatics, A. I. Boldyrev presented general discussions on the concepts of all-metal σ-aromaticity and σ-antiaromaticity for metallo-clusters. Schleyer illustrated that Nucleus-Independent Chemical Shifts (NICS) were among the most authoritative criteria for aromaticity. Ugalde discussed the earlier developments of all-metal aromatic compounds with all possible shapes. Besides the theoretical predictions, many stable all-metal aromatic trinuclear clusters have been isolated as the metallic analogues of either the σ-aromatic molecule's [H3]+ ion or the π-aromatic molecule's [C3H3]+ ion. Different from Hoffman's opinion on all-metal aromaticity, triangular all-metal aromatics were found to hold great potential in applications in coordination chemistry, catalysis, and material science. Triangular all-metal aromatics, which were theoretically proved to conform to the Hückel (4n + 2) rule and possess the smallest aromatic ring, could also play roles as stable ligands during the formation of all-metal sandwiches. The triangular and sandwich-shaped all-metal aromatics have not yet been specifically summarized despite their diversity of existence, puissant developments and various interesting applications. These findings are different from the public opinion that all-metal aromatics would be limited to further applications due to their overstated difficulties in synthesis and uncertain stabilities. Our review will specifically focus on the summarization of theoretical predictions, feasible syntheses and isolations, and multiple applications of triangular and sandwich shaped all-metal aromatics. The appropriateness and necessities of this review will emphasize and disseminate their importance and applications forcefully and in a timely manner.

Pd-Catalyzed Vicinal Intermolecular Annulations of Iodoarenes, Indoles, and Carbazoles with Enynes

Reaching the formidable C-H corners has been one of the top priorities of organic chemists in the recent past. This prompted us to disclose herein a vicinal annulation of 2-iodo benzoates, indoles, and carbazoles with N-embedded 1,6-enynes through 7-/8-membered palladacycles. The relay does not require the assistance of any directing group, leading to multicyclic scaffolds, which are readily diversified to an array of adducts (with new functional tethers and/or three contiguous stereocenters), in which we showcase a rare benzylic mono-oxygenation.

Highly effective and selective FeBr3-promoted deuterium bromination/cyclization of 1,n-enynes

A highly effective and selective FeBr3-promoted deuterium bromination/cyclization of 1,n-enynes is reported. On the one hand, the Lewis acid FeBr3 as a catalyst promotes cyclization of 1,n-enynes to afford deuterium heterocyclic frameworks with high efficiency. On the other hand, FeBr3 serves as the bromine source (with D2O as the deuterium source) to promote the formation of the desired deuterated pyrrole derivatives containing alkenyl bromide groups. This protocol provides an effective pathway to afford deuterated alkenyl brominative compounds as (Z)-isomers with high yields and selectivity, offering a new method for introducing 2H into organic compounds.

Catalytic hydrogenation of olefins by a multifunctional molybdenum-sulfur complex

Exploration of molybdenum complexes as homogeneous hydrogenation catalysts has garnered significant attention, but hydrogenation of unactivated olefins under mild conditions are scarce. Here, we report the synthesis of a molybdenum complex, [Cp*Mo(Ph2PC6H4S-CH = CH2)(Py)]+ (2), which exhibits intriguing reactivity toward C2H2 and H2 under ambient pressure. This vinylthioether complex showcases efficient catalytic activity in the hydrogenation of various aromatic and aliphatic alkenes, demonstrating a broad substrate scope without the need for any additives. The catalytic pathway involves an uncommon oxidative addition of H2 to the cationic Mo(II) center, resulting in a Mo(IV) dihydride intermediate. Moreover, complex 2 also shows catalytic activity toward C2H2, leading to the production of polyacetylene and the extension of the vinylthioether ligand into a pendant triene chain.

Synthesis of Deuterated and Sulfurated Polymers by Inverse Vulcanization: Engineering Infrared Transparency via Deuteration

The synthesis of deuterated, sulfurated, proton-free, glassy polymers offers a route to optical polymers for infrared (IR) optics, specifically for midwave IR (MWIR) photonic devices. Deuterated polymers have been utilized to enhance neutron cross-sectional contrast with proteo polymers for morphological neutron scattering measurements but have found limited utility for other applications. We report the synthesis of perdeuterated d14-(1,3-diisopropenylbenzene) with over 99% levels of deuteration and the preparation of proton-free, perdeuterated poly(sulfur-random-d14-(1,3-diisopropenylbenzene)) (poly(S-r-d14-DIB)) via inverse vulcanization with elemental sulfur. Detailed structural analysis and quantum computational calculations of these reactions demonstrate significant kinetic isotope effects, which alter mechanistic pathways to form different copolymer microstructures for deutero vs proteo poly(S-r-DIB). This design also allows for molecular engineering of MWIR transparency by shifting C-H bond vibrations around 3.3 μm/3000 cm-1 observed in proteo poly(S-r-DIB) to 4.2 μm/2200 cm-1. Furthermore, the fabrication of thin-film MWIR optical gratings made from molding of deuterated-sulfurated, proton-free poly(S-r-d14-DIB) is demonstrated; operation of these gratings at 3.39 μm is achieved successfully, while the proteo poly(S-r-DIB) gratings are opaque at these wavelengths, highlighting the promise of MWIR sensors and compact spectrometers from these materials.

Iodine-promoted transfer of dihydrogen from ketones to alkenes, triphenylmethyl, and diphenylmethyl derivatives

Herein, a novel class of transfer hydrogenation agent, cycloheptanone, was successfully employed in metal-free hydrogenation facilitated by iodine. A series of alkenes, triphenylmethyl derivatives, and diphenylmethyl derivatives were reduced to the desired compounds in moderate to excellent yields. The transfer hydrodeuteration of alkenes using α-deuterated cyclododecanone exhibited high regioselectivity. Preliminary mechanism studies confirmed the origins of the two hydrogen atoms involved in the reduction of alkenes. The current study paves the way for the use of ketones as unique transfer hydrogenation agents in chemical synthesis.

Late-Stage Chemo- and Enantioselective Oxidation of Indoles to C3-Monosubstituted Oxindoles

Catalytic asymmetric preparation of chiral 3-monosubstituted oxindoles represents a significant challenge in synthetic chemistry due to the ease of racemization of the tertiary stereocenter through enolization. Here, we describe a general titanium-catalyzed chemo- and enantioselective indole oxidation to produce a diverse set of chiral 3-monosubstituted oxindoles with up to 96% yield, 99% ee, and with a substrate/catalyst ratio of 10,000 by using the combination of a simple titanium(salan) catalyst with green and atom-economic terminal oxidant H2O2. The mild approach tolerates a broad range of functional groups, enabling late-stage asymmetric diversification of a series of commercial drugs and natural products together with late-stage asymmetric construction of a wide set of enzyme antagonists, all of which are difficult to achieve through existing methods.

Direct arene trifluoromethylation enabled by promiscuous activity of fungal laccase

Laccase from Trametes versicolor was found to oxidize non-phenolic arenes and enable the trifluoromethylation of arenes in the presence of in situ generated CF3 radicals at a catalyst loading as low as 0.0034%. The biocatalytic trifluoromethylation proceeded under mild conditions and could increase the yield by up to 12 fold, compared to the control.

Selective Electrochemical Oxidation of Benzylic C-H to Benzylic Alcohols with the Aid of Imidazolium Radical Mediators

Selective oxidation of benzylic C-H to benzylic alcohols is a well-known challenge in the chemical community since benzylic C-H is more prone to be overoxidized to benzylic ketones. In this work, we report the highly selective electro-oxidation of benzylic C-H to benzylic alcohols in an undivided cell in ionic liquid-based solution. As an example, the selectivity toward xanthydrol could be as high as 95.7% at complete conversion of xanthene, a typical benzylic C-H compound, on gram-scale in imidazolium bromide/H2O/DMF. Mechanism investigation reveals that the imidazolium radical generated in situ participants in a proton-coupled electron transfer process and low-barrier hydrogen bonds stabilize the reaction intermediates, together steering the redox equilibrium, favoring benzylic alcohols over benzylic ketones.

Organo-Mediator Enabled Electrochemical Deuteration of Styrenes

Despite widespread use of the deuterium isotope effect, selective deuterium labeling of chemical molecules remains a major challenge. Herein, a facile and general electrochemically driven, organic mediator enabled deuteration of styrenes with deuterium oxide (D2 O) as the economical deuterium source was reported. Importantly, this transformation could be suitable for various electron rich styrenes mediated by triphenylphosphine (TPP). The reaction proceeded under mild conditions without transition-metal catalysts, affording the desired products in good yields with excellent D-incorporation (D-inc, up to >99 %). Mechanistic investigations by means of isotope labeling experiments and cyclic voltammetry tests provided sufficient support for this transformation. Notably, this method proved to be a powerful tool for late-stage deuteration of biorelevant compounds.

Palladium-Catalyzed Enantioselective C-H Olefination to Access Planar-Chiral Cyclophanes by Dynamic Kinetic Resolution

Planar-chiral cyclophanes have received increasing attention for drug discovery and catalyst design. However, the catalytically asymmetric synthesis of planar-chiral cyclophanes has been a longstanding challenge. We describe the first Pd(II)-catalyzed enantioselective C-H olefination of prochiral cyclophanes. The low rotational barrier of less hindered benzene ring in the substrates allows the reaction to proceed through a dynamic kinetic resolution. This approach exhibits broad substrate scope, providing the planar-chiral cyclophanes in high yields (up to 99 %) with excellent enantioselectivities (up to >99 % ee). The ansa chain length scope studies reveal that the chirality of the cyclophanes arises from the bond rotation constraint of the benzene ring around the macrocycle plane, rather than the C-N axis. The C-H activation approach is also applicable to the late-stage modification of bioactive molecules and pharmaceuticals.

Assignment of the absolute configuration of molecules that are chiral by virtue of deuterium substitution using chiral tag molecular rotational resonance spectroscopy

Chiral tag molecular rotational resonance (MRR) spectroscopy is used to assign the absolute configuration of molecules that are chiral by virtue of deuterium substitution. Interest in the improved performance of deuterated active pharmaceutical ingredients has led to the development of precision deuteration reactions. These reactions often generate enantioisotopomer reaction products that pose challenges for chiral analysis. Chiral tag rotational spectroscopy uses noncovalent derivatization of the enantioisotopomer to create the diastereomers of the 1:1 molecular complexes of the analyte and a small, chiral molecule. Assignment of the absolute configuration requires high-confidence determinations of the structures of these weakly bound complexes. A general search method, CREST, is used to identify candidate geometries. Subsequent geometry optimization using dispersion corrected density functional theory gives equilibrium geometries with sufficient accuracy to identify the isomers of the chiral tag complexes produced in the pulsed jet expansion used to introduce the sample into the MRR spectrometer. Rotational constant scaling based on the fact that the diastereomers have the same equilibrium geometry gives accurate predictions allowing identification of the homochiral and heterochiral tag complexes and, therefore, assignment of absolute configuration. The method is successfully applied to three oxygenated substrates from enantioselective Cu-catalyzed alkene transfer hydrodeuteration reaction chemistry.

Palladium/Norbornene-Catalyzed Direct Vicinal Di-Carbo-Functionalization of Indoles: Reaction Development and Mechanistic Study

Methods that can simultaneously install multiple different functional groups to heteroarenes via C-H functionalizations are valuable for complex molecule synthesis, which, however, remain challenging to realize. Here we report the development of vicinal di-carbo-functionalization of indoles in a site- and regioselective manner, enabled by the palladium/norbornene (Pd/NBE) cooperative catalysis. The reaction is initiated by the Pd(II)-mediated C3-metalation and specifically promoted by the C1-substituted NBEs. The mild, scalable, and robust reaction conditions allow for a good substrate scope and excellent functional group tolerance. The resulting C2-arylated C3-alkenylated indoles can be converted to diverse synthetically useful scaffolds. The combined experimental and computational mechanistic study reveals the unique role of the C1-substituted NBE in accelerating the turnover-limiting oxidative addition step.

Synchronous Proton-Hydride Transfer by a Pyrazole-Functionalized Protic Mn(I) Complex in Catalytic Alcohol Dehydrogenative Coupling

A series of Mn(I) complexes Mn(L1 )(CO)3 Br, Mn(L2 )(CO)3 Br, Mn(L1 )(CO)3 (OAc) and Mn(L3 )(CO)3 Br [L1 =2-(5-tert-butyl-1H-pyrazol-3-yl)-1,8-naphthyridine, L2 =2-(5-tert-butyl-1H-pyrazol-3-yl)pyridine, L3 =2-(5-tert-butyl-1-methyl-1H-pyrazol-3-yl)-1,8-naphthyridine] were synthesized and fully characterized. The acid-base equilibrium between the pyrazole and the pyrazolato forms of Mn(L1 )(CO)3 Br was studied by 1 H NMR and UV-vis spectra. These complexes are screened as catalysts for acceptorless dehydrogenative coupling (ADC) of primary alcohols and aromatic diamines for the synthesis of benzimidazole and quinoline derivatives with the release of H2 and H2 O as byproducts. The protic complex Mn(L1 )(CO)3 Br shows the highest catalytic activity for the synthesis of 2-substituted benzimidazole derivatives with broad substrate scope, whereas a related complex [Mn(L3 )(CO)3 Br], which is devoid of the proton responsive β-NH unit, shows significantly reduced catalytic efficiency validating the crucial role of the β-NH functionality for the alcohol dehydrogenation reactions. Control experiments, kinetic and deuterated studies, and density functional theory (DFT) calculations reveal a synchronous hydride-proton transfer by the metal-ligand construct in the alcohol dehydrogenation step.

Hydrogenative alkene perdeuteration aided by a transient cooperative ligand

Deuterogenation of unsaturated organic compounds is an attractive route for installing C(sp3)-D bonds, but the existing methods typically use expensive D2 and introduce only two deuterium atoms per unsaturation. Herein we report the hydrogenative perdeuteration of alkenes using readily available H2 and D2O instead of D2, catalysed by an acridanide-based ruthenium pincer complex and resulting in the incorporation of up to 4.9 D atoms per C=C double bond in a single synthetic step. Importantly, adding a catalytic amount of thiol, which serves as a transient cooperative ligand, ensures the incorporation of deuterium rather than protium by balancing the rates of two sequential deuteration processes. The current method opens an avenue for installing perdeuteroalkyl groups at specific sites from widely available alkenes under mild conditions.

Impact of Catalyst Deuteration on the Reactivity of Chiral Phase-Transfer Organocatalysts

Site-specifically deuterated organocatalysts were prepared and found to show improved reactivity over the non-deuterated analogs. Two privileged C2 -symmetric chiral binaphthyl-modified tetraalkylammonium salts were selected for this study. The stability of these phase-transfer catalysts was generally improved by site-specific deuteration, though the degree of improvement was structure dependent. In particular, a large secondary kinetic isotope effect was observed for the tetradeuterated phase-transfer catalyst. The performance of these deuterated catalysts in the asymmetric catalytic alkylation of amino acid derivatives was better than that of non-deuterated analogs at low catalyst loadings. The results suggest that catalyst deuteration is a promising strategy for enhancing the stability and performance of organocatalysts.

Ruthenium nanoparticles stabilized by 1,2,3-triazolylidene ligands in the hydrogen isotope exchange of E-H bonds (E = B, Si, Ge, Sn) using deuterium gas

A series of ruthenium nanoparticles (Ru·MIC) stabilized with different mesoionic 1,2,3-triazolylidene (MIC) ligands were prepared by decomposition of the Ru(COD)(COT) (COD = 1,5-cyclooctadiene; COT = 1,3,5-cyclooctatriene) precursor with H2 (3 bar) in the presence of substoichiometric amounts of the stabilizer (0.1-0.2 equiv.). Small and monodisperse nanoparticles exhibiting mean sizes between 1.1 and 1.2 nm were obtained, whose characterization was carried out by means of transmission electron microscopy (TEM), including high resolution TEM (HRTEM), inductively coupled plasma (ICP) analysis and X-ray photoelectron spectroscopy (XPS). In particular, XPS measurements confirmed the presence of MIC ligands on the surfaces of the nanoparticles. The Ru·MIC nanoparticles were used in the isotopic H/D exchange of different hydrosilanes, hydroboranes, hydrogermananes and hydrostannanes using deuterium gas under mild conditions (1.0 mol% Ru, 1 bar D2, 55 °C). Selective labelling of the E-H (E = B, Si, Ge, Sn) bond in these derivatives, with high levels of deuterium incorporation, was observed.

In Situ Regulation of MnO2 Structural Characteristics by Oxyanions to Boost Permanganate Autocatalysis for Phenol Removal

Oxyanions, a class of constituents naturally occurring in water, have been widely demonstrated to enhance permanganate (Mn(VII)) decontamination efficiency. However, the detailed mechanism remains ambiguous, mainly because the role of oxyanions in regulating the structural parameters of colloidal MnO2 to control the autocatalytic activity of Mn(VII) has received little attention. Herein, the origin of oxyanion-induced enhancement is systematically studied using theoretical calculations, electrochemical tests, and structure-activity relation analysis. Using bicarbonate (HCO3-) as an example, the results indicate that HCO3- can accelerate the degradation of phenol by Mn(VII) by improving its autocatalytic process. Specifically, HCO3- plays a significant role in regulating the structure of in situ produced MnO2 colloids, i.e., increasing the surface Mn(III)s content and restricting particle growth. These structural changes in MnO2 facilitate its strong binding to Mn(VII), thereby triggering interfacial electron transfer. The resultant surface-activated Mn(VII)* complexes demonstrate excellent degrading activity via directly seizing one electron from phenol. Further, other oxyanions with appropriate ionic potentials (i.e., borate, acetate, metasilicate, molybdate, and phosphate) exhibit favorable influences on the oxidative capability of Mn(VII) through an activation mechanism similar to that of HCO3-. These findings considerably improve our fundamental understanding of the oxidation behavior of Mn(VII) in actual water environments and provide a theoretical foundation for designing autocatalytically boosted Mn(VII) oxidation systems.

Alkali-metal bases in catalytic hydrogen isotope exchange processes

The preparation of compounds labelled with deuterium or tritium has become an essential tool in a range of research fields. Hydrogen isotope exchange (HIE) offers direct access to said compounds, introducing these isotopes in a late stage. Even though the field has rapidly advanced with the use of transition metal catalysis, alkali-metal bases, used as catalysts or under stoichiometric conditions, have also emerged as a viable alternative. In this minireview we describe the latest advances in the use of alkali-metal bases in HIE processes, showcasing their synthetic potential as well as current challenges in the field. It is divided in different sections based on the isotope source used, emphasizing their benefits, disadvantages and limitations. The influence on the choice of alkali-metal in these processes as well as their possible mechanistic pathways are also discussed.

Van der Waals isotope heterostructures for engineering phonon polariton dispersions

Element isotopes are characterized by distinct atomic masses and nuclear spins, which can significantly influence material properties. Notably, however, isotopes in natural materials are homogenously distributed in space. Here, we propose a method to configure material properties by repositioning isotopes in engineered van der Waals (vdW) isotopic heterostructures. We showcase the properties of hexagonal boron nitride (hBN) isotopic heterostructures in engineering confined photon-lattice waves-hyperbolic phonon polaritons. By varying the composition, stacking order, and thicknesses of h10BN and h11BN building blocks, hyperbolic phonon polaritons can be engineered into a variety of energy-momentum dispersions. These confined and tailored polaritons are promising for various nanophotonic and thermal functionalities. Due to the universality and importance of isotopes, our vdW isotope heterostructuring method can be applied to engineer the properties of a broad range of materials.

Synthesis of 2,3-Fused Quinazolinones via the Radical Cascade Pathway and Reaction Mechanistic Studies by DFT Calculations

An efficient radical cascade cyclization of unactivated alkenes toward the synthesis of a series of ring-fused quinazolinones has been developed in moderate to excellent yields using commercially available ethers, alkanes, and alcohols, respectively, under a base-free condition in a short time without a transition metal as catalyst. Notably, the transformations can be carried out with the advantages of a broad substrate scope and high atomic economy. Density functional theory calculations and wavefunction analyses were performed to elucidate the radical reaction mechanism.

CS-Symmetric Pyridine(diimine) Iron Methyl Complexes for Catalytic [2+2] Cycloaddition and Hydrovinylation: Metallacycle Geometry Determines Selectivity

A series of C_S-symmetric (aryl,alkyl)-substituted pyridine(dimine) iron methyl (^CyA^RPDI)FeCH₃ complexes have been prepared, characterized, and evaluated as precatalysts for the [2+2]-cycloaddition of butadiene and ethylene. Mixtures of vinylcyclobutane and (Z)-hexa-1,4-diene were observed in each case. By comparison, C_2v-symmetric, arylated (PDI) iron catalysts are exclusively selective for reversible [2+2]-cycloaddition to yield vinylcyclobutane. The alteration in the chemoselectivity of the catalytic reaction was investigated through a combination of precatalyst stability studies, identification of catalytic resting state(s), and ²H and ¹³C isotopic labeling experiments. While replacement of an aryl-imine substituent with an N-alkyl group decreases the stability of the formally iron(0) dinitrogen and butadiene complexes, two diamagnetic metallacycles were identified as catalyst resting states. Deuterium labeling and NOESY/EXSY NMR experiments support 1,4-hexadiene arising from catalytic hydrovinylation involving reversible oxidative cyclization leading to accessible cis-metallacycle. Cyclobutane formation proceeds by irreversible C(sp³)-C(sp³) bond-forming reductive elimination from a trans-metallacycle. These studies provide key mechanistic understanding into the high selectivity of bis(arylated) pyridine(diimine) iron catalysts for [2+2]-cycloaddition, unique, thus far, to this class of iron catalysts.

Asymmetric Catalytic Friedel-Crafts Reactions of Unactivated Arenes

Since its discovery more than a century ago, the Friedel-Crafts reaction has manifested itself as a powerful method for the introduction of carbon substituents to arenes. Despite its potential generality, the scope of the reaction is intrinsically limited by the arene's nucleophilicity, which has previously restrained the applicability of asymmetric variants to activated substrates. To overcome this fundamental limitation, we report herein an asymmetric Friedel-Crafts reaction of unactivated, purely hydrocarbon arenes, alkoxybenzenes, and heteroarenes with N,O-acetals to give enantioenriched arylglycine esters. Highly regio- and stereoselective C-C bond formation was achieved using strong and confined Brønsted acid organocatalysts, enabling the first asymmetric catalytic Friedel-Crafts reaction of simple alkylbenzenes.

Precision Deuteration Using Cu-Catalyzed Transfer Hydrodeuteration to Access Small Molecules Deuterated at the Benzylic Position

A highly regio- and chemoselective Cu-catalyzed aryl alkyne transfer hydrodeuteration to access a diverse scope of aryl alkanes precisely deuterated at the benzylic position is described. The reaction benefits from a high degree of regiocontrol in the alkyne hydrocupration step, leading to the highest selectivities reported to date for an alkyne transfer hydrodeuteration reaction. Only trace isotopic impurities are formed under this protocol, and analysis of an isolated product by molecular rotational resonance spectroscopy confirms that high isotopic purity products can be generated from readily accessible aryl alkyne substrates.

Electrochemical activation of periodate with graphite electrodes for water decontamination: Excellent applicability and selective oxidation mechanism

Advanced oxidation technologies based on periodate (PI, IO₄^-) have garnered significant attention in water decontamination. In this work, we found that electrochemical activation using graphite electrodes (E-GP) can significantly accelerate the degradation of micropollutants by PI. The E-GP/PI system achieved almost complete removal of bisphenol A (BPA) within 15 min, exhibited unprecedented pH tolerance ranging from pH 3.0 to 9.0, and showed more than 90% BPA depletion after 20 h of continuous operation. Additionally, the E-GP/PI system can realize the stoichiometric transformation of PI into iodate, dramatically decreasing the formation of iodinated disinfection by-products. Mechanistic studies confirmed that singlet oxygen (¹O₂) is the primary reactive oxygen species in the E-GP/PI system. A comprehensive evaluation of the oxidation kinetics of ¹O₂ with 15 phenolic compounds revealed a dual descriptor model based on quantitative structure-activity relationship (QSAR) analysis. The model corroborates that pollutants exhibiting strong electron-donating capabilities and high pK_a values are more susceptible to attack by ¹O₂ through a proton transfer mechanism. The unique selectivity induced by ¹O₂ in the E-GP/PI system allows it to exhibit strong resistance to aqueous matrices. Thus, this study demonstrates a green system for the sustainable and effective elimination of pollutants, while providing mechanistic insights into the selective oxidation behaviour of ¹O₂.

Mechanistic roles of metal- and ligand-protonated species in hydrogen evolution with [Cp*Rh] complexes

Protonation reactions involving organometallic complexes are ubiquitous in redox chemistry and often result in the generation of reactive metal hydrides. However, some organometallic species supported by η5-pentamethylcyclopentadienyl (Cp*) ligands have recently been shown to undergo ligand-centered protonation by direct proton transfer from acids or tautomerization of metal hydrides, resulting in the generation of complexes bearing the uncommon η4-pentamethylcyclopentadiene (Cp*H) ligand. Here, time-resolved pulse radiolysis (PR) and stopped-flow spectroscopic studies have been applied to examine the kinetics and atomistic details involved in the elementary electron- and proton-transfer steps leading to complexes ligated by Cp*H, using Cp*Rh(bpy) as a molecular model (where bpy is 2,2'-bipyridyl). Stopped-flow measurements coupled with infrared and UV-visible detection reveal that the sole product of initial protonation of Cp*Rh(bpy) is [Cp*Rh(H)(bpy)]+, an elusive hydride complex that has been spectroscopically and kinetically characterized here. Tautomerization of the hydride leads to the clean formation of [(Cp*H)Rh(bpy)]+. Variable-temperature and isotopic labeling experiments further confirm this assignment, providing experimental activation parameters and mechanistic insight into metal-mediated hydride-to-proton tautomerism. Spectroscopic monitoring of the second proton transfer event reveals that both the hydride and related Cp*H complex can be involved in further reactivity, showing that [(Cp*H)Rh] is not necessarily an off-cycle intermediate, but, instead, depending on the strength of the acid used to drive catalysis, an active participant in hydrogen evolution. Identification of the mechanistic roles of the protonated intermediates in the catalysis studied here could inform design of optimized catalytic systems supported by noninnocent cyclopentadienyl-type ligands.

Mechanistic Study on CpRh(III)-Catalyzed [3 + 2] Annulation of Aniline Derivatives with Vinylsilanes: A DFT Study

The rhodium(III)-catalyzed reaction of aniline derivatives that contain a pyrimidine-directing group with vinylsilanes results in the formation of C3-substituted indoline derivatives. The reaction path and formation of the indoline product with density functional theory calculations were analyzed. This study reveals that the whole catalysis can be characterized in the following stages: (I) C-H activation via concerted metalation deprotonation, (II) 2,1-vinylsilane insertion, (III) deprotonation of the NH amide proton, (IV) the oxidation of Ag⁺, and (V) reductive elimination. These steps are kinetically and thermodynamically feasible for experimental realization under mild conditions, and the insertion step with a barrier of 22.0 kcal/mol should not only be the critical step of regioselectivity but also the rate-determining step during the whole catalysis. Computations reveal that the Ag⁺ oxidation can accelerate the reductive elimination step after the formation of natural intermediate, thus highlighting the role of Ag⁺ as a catalytic promoter for the oxidatively induced reactivity of the Rh catalyst in C3-substituted indoline synthesis.

Non-Covalent Isotope Effects

In this Perspective, we present examples of isotope effects that originate from noncovalent interactions, mainly hydrogen bonding, electrostatics, and confinement. They are traditionally widely used in isotopic enrichment processes, as well as in studies of mechanisms of different (bio)chemical and physical phenomena. We then show the emerging areas of their applications, mainly medical and material sciences. We stress that these emerging applications require either high enrichment or isotopic substitution, which requires the development of new effective techniques of isotopic purification.