Coinage metal-N-heterocyclic carbene complexes

Design, synthesis, characterization, and biological activities of novel Ag(I)-NHC complexes based on 1,3-dioxane ligand

Herein, a series of new Ag(I)-NHC complexes containing 1,3-dioxane group were synthesized by the direct reaction of Ag2O and benzimidazolium salts in light-free conditions. All Ag(I)-NHC complexes were spectrally characterized using 1H, 13C NMR, FT-IR, LC-MS, and elemental analysis. Additionally, the structures of compounds 1a and 1e were elucidated by the single X-ray diffraction techniques. Further, the synthesized Ag(I)-NHC complexes were evaluated for cytotoxicity study on the L-929 cells and the anticancer activity against the HCT 116 and MCF-7 cancer cell lines. Notably, 1a showed significant anticancer activity against HCT 116 with an IC50 of 6.37 ± 0.92 μg/mL compared to cisplatin (IC50 = 36.75 ± 1.76 μg/mL). 1c (IC50 = 3.21 ± 1.96 μg/mL) and 1e (IC50 = 3.72 ± 1.12 μg/mL) exhibited significant anticancer activity against MCF-7 cells and was similar to cisplatin (IC50 = 32.17 ± 2.85 μg/mL). Meanwhile, 1a and 1e displayed the highest selectivity index. Most importantly, the cell viability test showed that 1e induced neglectable cytotoxicity (IC50 = 36.38 ± 2.27 μg/mL) toward L-929 and was similar to cisplatin (IC50 = 36.11 ± 2.09 μg/mL). The anticancer activities of Ag(I)-NHC complexes vary depending on the substituent group of the silver complex and the cell line type. Moreover, the inhibitory mechanism of 1e was not dependent on caspase-associated apoptosis initiated by the lysosomal-mitochondrial pathway. Taken together, we conclude that this work provides a simple and rapid protocol for the synthesis of Ag(I)-NHC complexes and the featured Ag(I)-NHC complexes have an anticancer drug potential for biomedical applications.

Metal complexes of backbone-halogenated imidazol-2-ylidenes

In this manuscript, literature reports on mono- and di-halogen (F, Cl, Br, and I) substituted at positions 4 or/and 4,5 imidazol-2-ylidene (NHC) metal complexes are discussed: particularly, their structural diversity with various metals (groups 6-13), important physicochemical properties, catalytic and medicinal/biological applications are reviewed. To our knowledge, there are no literature reports on group 4 and 5 metal complexes with this type of NHC ligands. Halogenated imidazol-2-ylidene metal complexes deserve special attention because halogens are the classic electron donating groups (mesomerically) in conjugated aromatic/heteroaromatic ring systems, but electron withdrawing inductively. However, they exhibit a significant electron withdrawing inductive effect, thus providing unique electronic properties. This is important for fine tuning of σ-donor abilities of the "carbenic" carbon of imidazol-2-ylidenes, which directly affect catalytic performance of their metal complexes. Other applications, advantages, and disadvantages of halogenated vs. unsubstituted imidazol-2-ylidene metal complexes are critically analyzed and summarized in this review.

Synthesis of P-bridged, planar bis(NHC) BCl3 adducts

Planar PV- or PIII-bridged bis(NHCs), which have only been employed in transition metal complex chemistry so far, were subjected to BCl3-containing solutions targeting the corresponding bis(NHC) BCl3 adducts. While the P(O)NEt2-bridged bis(NHC) showed the expected adduct formation, the PNEt2-bridged bis(NHC) reacted not only at the carbene moiety but also at the P-NEt2 functional group. The latter enabled access to the first 1,4-diphosphinine bis(NHC) main group adduct; its formation and properties were investigated by DFT calculations. Through the same route, a 1,4-diphosphinine bis(imidazolium) scaffold was generated and explored theoretically and experimentally. The new 1,4-diphosphinines are shown to possess high global aromaticity and a unique P-centred reactivity, allowing the formation of hitherto inaccessible [4 + 2]-cycloaddition products, thus suggesting potential new applications compared to previously known 1,4-diphosphinine derivatives.

Mechanochemistry for Organic and Inorganic Synthesis

In recent years, mechanochemistry has become an innovative and sustainable alternative to traditional solvent-based synthesis. Mechanochemistry rapidly expanded across a wide range of chemistry fields, including diverse organic compounds and active pharmaceutical ingredients, coordination compounds, organometallic complexes, main group frameworks, and technologically relevant materials. This Review aims to highlight recent advancements and accomplishments in mechanochemistry, underscoring its potential as a viable and eco-friendly alternative to conventional solution-based methods in the field of synthetic chemistry.

Synthesis of a Metalla[2]catenane, Metallarectangles and Polynuclear Assemblies from Di(N-Heterocyclic Carbene) Ligands

The 2,7-fluorenone-linked bis(6-imidazo[1,5-a]pyridinium) salt H2-1(PF6)2 reacts with Ag2O in CH3CN to yield the [2]catenane [Ag4(1)4](PF6)4. The [2]catenane rearranges in DMF to yield two metallamacrocycles [Ag2(1)2](PF6)2. 2,7-Fluorenone-bridged bis-(imidazolium) salts H2-L(PF6)2 (L=2 a, 2 b) react with Ag2O in CH3CN to yield metallamacrocycles [Ag2(L)2](PF6)2 with interplanar distances between the fluorenone rings too small for [2]catenane formation. Intra- and intermolecular π⋅⋅⋅π interactions between the fluorenone groups were observed by X-ray crystallography. The strongly kinked 2,7-fluorenone bridged bis(5-imidazo[1,5-a]pyridinium) salt H2-4(PF6)2 reacts with Ag2O to yield [Ag2(4)(CN)](PF6), while the tetranuclear assembly [Ag4(4)2(CO3)](PF6)2 was obtained in the presence of K2CO3.

Mechanochemical Synthesis of Corannulene Flanked N-heterocyclic Carbene (NHC) Precursors and Preparation of Their Metal Complexes

The synthesis of new compounds is an important pillar for the advancement of the field of chemistry and adjacent fields. In this regard, over the last decades huge efforts have been made to not only develop new molecular entities but also more efficient sustainable synthetic methodologies due to the increasing concerns over environmental sustainability. In this context, we have developed synthetic routes to novel corannulene flanked imidazolium bromide NHC precursors both in the solid-state and solution phases. Our work presents a comprehensive comparative study of mechanochemical routes and conventional solution-based methods. Green metrics and energy consumption comparison were performed for both routes revealing ball-milling generation of these compounds to be an environmentally greener technique to produce such precursors compared to conventional solvent-based methods. In addition, we have demonstrated proof-of-concept of the herein reported corannulene flanked NHCs to be robust ligands for transition metals and their ligand substitution reactions.

Nickel-Catalyzed Cross-Coupling Reaction of Aryl Bromides/Nitriles with Imidazolium Salts Involving Inert C-N Bond Cleavage

We herein present a nickel-catalyzed cross-coupling reaction of aryl halides and nitriles with imidazolium salts. A series of 2-arylated imidazoles could be obtained in moderate to good yields through inert C-N bond cleavage. The imidazolium salt in this reaction acts as both a coupling partner and N-heterocyclic carbene (NHC) ligand precursor. Mechanistic studies reveal that consecutive steps of migratory insertion of the NHC into the aryl C-Ni bond and β-C elimination might be involved in the proposed reaction mechanism.

"Inverted" Cyclic(Alkyl)(Amino)Carbene (CAAC) Ruthenium Complex Catalyzed Isomerization Metathesis (ISOMET) of Long Chain Olefins to Propylene at Low Ethylene Pressure

Isomerization Metathesis (ISOMET) reaction is an emerging tool for "open loop" chemical recycling of polyethylene to propylene. Novel, latent N-Alkyl substituted Cyclic(Alkyl)(Amino)Carbene (CAAC)-ruthenium catalysts (5a-Ru, 3b-Ru - 6c-Ru) are developed rendering "inverted" chemical structure while showing enhanced ISOMET activity in combination with (RuHCl)(CO)(PPh3)3 (RuH) double bond isomerization co-catalyst. Systematic investigations reveal that the steric hindrance of the substituents on nitrogen and carbon atom adjacent to carbene moiety in the CAAC ligand have significantly improved the catalytic activity and robustness. In contrast to the NHC-Ru and CAAC-Ru catalyst systems known so far, these systems show higher isomerization metathesis (ISOMET) activity (TON: 7400) on the model compound 1-octadecene at as low as 3.0 bar optimized pressure, using technical grade (3.0) ethylene. The propylene content formed in the gas phase can reach up to 20% by volume.

Concatenating Structural Constraint Effects at Tin for the Sequential Generation, Stabilization, and Transfer of Acyclic Aminocarbenes

Structural constraint approaches have been employed toward different ends in recent years, from augmenting the nucleophilicity in pyramidalized low-valent p-block compounds to enhancing the Lewis acidities at planarized tetravalent p-block elements. While previous studies exploited these effects separately, this work introduces a strategy to concatenate structural constraint approaches at individual stages of a reaction sequence in a row to unlock a synthetic path unattainable by conventional methodologies. The boosted nucleophilicity resulting from the constrained tetracoordinated calix[4]pyrrolato stannate(II) dianion enables the reductive formation of sterically unprotected acyclic aminocarbenes. These amino carbenes are stabilized at the concomitantly formed square-planar stannane(IV) as air-stable adducts. Transfer of the carbenes onto copper(I) by cooperativity of the calix[4]pyrrole ligand finalizes this protocol to hitherto unreported yet prototypical carbene complexes. Detailed spectroscopic and quantum theoretical analyses establish the synergy of structural constraints and element-ligand cooperation as the linchpin to this reaction path and its selectivity.

Two-Coordinate Thermally Activated Delayed Fluorescence Coinage Metal Complexes: Molecular Design, Photophysical Characters, and Device Application

Since the emergence of the first green light emission from a fluorescent thin-film organic light emitting diode (OLED) in the mid-1980s, a global consumer market for OLED displays has flourished over the past few decades. This growth can primarily be attributed to the development of noble metal phosphorescent emitters that facilitated remarkable gains in electrical conversion efficiency, a broadened color gamut, and vibrant image quality for OLED displays. Despite these achievements, the limited abundance of noble metals in the Earth's crust has spurred ongoing efforts to discover cost-effective electroluminescent materials. One particularly promising avenue is the exploration of thermally activated delayed fluorescence (TADF), a mechanism with the potential to fully harness excitons in OLEDs. Recently, investigations have unveiled TADF in a series of two-coordinate coinage metal (Cu, Ag, and Au) complexes. These organometallic TADF materials exhibit distinctive behavior in comparison to their organic counterparts. They offer benefits such as tunable emissive colors, short TADF emission lifetimes, high luminescent quantum yields, and reasonable stability. Impressively, both vacuum-deposited and solution-processed OLEDs incorporating these materials have achieved outstanding performance. This review encompasses various facets on two-coordinate TADF coinage metal complexes, including molecular design, photophysical characterizations, elucidation of structure-property relationships, and OLED applications.

Noble gas dative bonding with coinage metal carbene complexes: A theoretical study

The structure and stability of noble gas (Ng) bound [NHCM]+ complexes (M = Cu, Ag, and Au) were investigated using Quantum chemical calculations. Dissociation energies, enthalpy, and free energy changes were computed to comprehend the stability of these Ng-bonded complexes. The nature of interactions associated to the bonding between metal and noble gas atoms was studied through the computation of electron density-based descriptors. Detailed electronic structure study revealed electron donation from the noble gas atoms towards the metal center, resulting in the formation of dative bonds.

Application of phosphorus-bridged rigid, bent bis(NHCs) as dipodal ligands in main group and transition metal chemistry

Phosphorus-bridged rigid, bent bis(N-heterocyclic) carbenes have not been reported, so far, despite having structural features that could make them interesting ligands in coordination and main group element chemistry. In previous reports, we had demonstrated that tuning of σ3- and σ4-phosphorus environments in planarised bis(NHCs) affects electronic properties and can provide additional coordination sites. Herein, we report on first examples of synthesis and conversion of 1,4-diphosphabarrelene-related compounds into rigid bent, doubly P-bridged bis(NHCs). The formation of main group element adducts with substrates from group 13, 14 and 15 illustrates opportunities to access novel scaffolds and to create nonplanar branching points. DFT calculations reveal the new bis(NHCs) to be good candidates as novel soft/hard ligands with up to four coordination sites. The synthesis of a dinuclear Fe(CO)4 complex is demonstrated. The thermal retro-[4 + 2] cycloaddition was theoretically and experimentally explored for a variety of ionic and zwitterionic 1,4-diphosphabarrelenes, and the generation and trapping of a dinuclear Fe(0) bis(NHC) complex with a tricyclic 1σ2,4 σ2-diphosphinine scaffold is presented.

Synthesis and photophysical properties of dinuclear N-heterocyclic carbene (NHC) copper(I) complexes and their application to photoluminescent light-emitting diodes and anti-counterfeiting

Here, a series of dinuclear N-heterocyclic carbene (NHC) copper(I) complexes having 3,3'-(1,4-phenylenebis(methylene))bis(1-(pyridin-2-yl)-1H-imidazolylidene as bis-NHC ligand and bis[(2-diphenylphosphino)phenyl]ether (POP) as auxiliary ligand have been successfully prepared, and their photophysical properites were investigaged experimentally and theocitcally. The resulting complexes all exhibited intense green to yellow emission that originated from the thermally activated delayed fluorescence (TADF) with a high photoluminescence quantum yield of up to 0.67 and longer excited-state lifetimes on the microsecond time scale in the solid state. Green and yellow light-emitting diode (LED) devices based on Cu(I) complexes have successfully achieved good color rendering indices. Moreover, the anti-counterfeiting patterns and QR codes made of Cu(I) complexes have been applied to clothing, banknotes, books and glass plates with excellent anti-counterfeiting effects.

The Fluoride Method: Access to Silver(III) NHC Complexes

We have synthesized the first silver(III) carbene complexes, (CF3 )3 Ag(NHC), by direct reaction of the silver(III) fluoride precursor complex [PPh4 ][(CF3 )3 AgF] with different imidazolium salts. This novel methodology circumvents the use of free NHC molecules. The silver(III) carbene complexes thus prepared are unprecedented and show remarkable thermal stabilities. They display square-planar or square-pyramidal geometry. Following our calculations, the electronic structure of a model representative complex exhibits Inverse Ligand Field (ILF). The compounds reported herein are synthetic analogues of the elusive difluorocarbene and carbonyl species proposed as intermediates in the acidic decomposition of [Ag(CF3 )4 ]- . The synthetic procedure reported is envisaged to enable access to carbene complexes of other late transition-metals in high oxidation states.

Half-sandwich Ni(II) complexes bearing enantiopure bidentate NHC-carboxylate ligands: efficient catalysts for the hydrosilylative reduction of acetophenones

Chiral nickel complexes containing NHC-carboxylate chelate ligands derived from the (S)-isomeric form of amino acids have been synthesised from the corresponding imidazolium salt and nickelocene. The presence of the carboxylate on the N-side arm of the heterocycle results in the competing formation of mixtures of mono- and bis-NHC complexes (i.e., [Ni(η5-Cp)(κ2-C,O-NHC)] and [Ni(κ2-C,O-NHC)2]), both of which retain the (S)-configuration of the stereogenic center and which can be separated by chromatography. Both the 18e- and 16e- complexes are found to be very stable and cannot be interconverted. The composition of the resulting mixtures depends mainly on the entity of the amino acid residue and, of more practical interest, on the reaction conditions. Thus, microwave heating and MeCN as a solvent favor the formation of the half-sandwich nickel complexes, rather than the bis-NHC compounds. Some of the [Ni(η5-Cp)(κ2-C,O-NHC)] complexes turn out to be among the best nickel catalysts for the hydrosilylative reduction of p-acetophenones described to date, although without chiral induction, in the absence of activating additives and under mild catalytic conditions.

Unravelling the Roles of Solvophobic Effects and π⋅⋅⋅π Stacking Interactions in the Formation of [2]Catenanes Featuring Di-(N-Heterocyclic Carbene) Building Blocks

A series of [2]catenanes has been prepared from di-NHC building blocks by utilizing solvophobic effects and/or π⋅⋅⋅π stacking interactions. The dinickel naphthobiscarbene complex syn-[1] and the kinked biphenyl-bridged bipyridyl ligand L2 yield the [2]catenane [2-IL](OTf)4 by self-assembly. Solvophobic effects are pivotal for the formation of the interlocked species. Substitution of the biphenyl-linker in L2 for a pyromellitic diimide group gave ligand L3 , which yielded in combination with syn-[1] the [2]catenane [3-IL](OTf)4 . This assembly exhibits enhanced stability in diluted solution, aided by additional π⋅⋅⋅π stacking interactions. The π⋅⋅⋅π stacking was augmented by the introduction of a pyrene bridge between two NHC donors in ligand L4 . Di-NHC precursor H2 -L4 (PF6 )2 reacts with Ag2 O to give the [Ag2 L4 2 ]2 [2]catenane [4-IL](PF6 )4 , which shows strong π⋅⋅⋅π stacking interactions between the pyrene groups. This assembly was readily converted into the [Au2 L4 2 ]2 gold species [5-IL](PF6 )4 , which exhibits exceptional stability based on the strong π⋅⋅⋅π stacking interactions and the enhanced stability of the Au-CNHC bonds.

The Facile Hydrolysis of Imidazolinium Chlorides (N-Heterocyclic Carbene Precursors) Under Basic Aqueous Conditions

The hydrolysis of imidazolinium chlorides takes place readily in a basic water/dichloromethane biphasic mixture at room temperature. Experimental parameters were optimized to afford full conversions and high yields of γ-aminoformamides starting from twelve symmetrical substrates with alkyl or aryl substituents on their nitrogen atoms, and five unsymmetrical 1-alkyl-3-arylimidazolinium chlorides. NMR and XRD analyses showed that the cleavage of unsymmetrical salts led to γ-alkylamino-N-arylformamides with a high regioselectivity and that bulky alkyl or aryl groups on the formamide moiety led to the isolation of the (E)-isomer in high stereoisomeric purity (>95 %), whereas smaller and more flexible alkyl substituents afforded mixtures of (E)- and (Z)-rotamers. Control experiments showed that the hydrolysis of 1,3-dimesitylimidazolinium chloride (SIMes ⋅ HCl) did not occur readily in pure or acidic water and that the presence of bulky aromatic substituents on the nitrogen atoms of 1,3-bis(2,6-diisopropylphenyl)imidazolinium chloride (SIDip ⋅ HCl) efficiently slowed down its hydrolysis under basic aqueous conditions. Most strikingly, this work highlighted the critical influence of the counteranion on the reactivity of imidazolinium cations. Indeed, the chloride salts underwent a facile hydrolysis in the presence of water and Na2 CO3 , whereas various other NHC ⋅ HX derivatives reacted much slower or remained essentially inert under these conditions.

Heterobimetallic Complexes Bridged by an Unsymmetrical Bis(NHC) Ligand: Study of Enhanced Catalytic Activity in Tandem Transformations and Understanding of Cooperativity between the Metal Centers

The bis(azolium) salt [L1-H2 ]Br2 was found to serve as a suitable platform for accessing the heterobimetallic IrIII -M (M=PdII /AuI ) and PdII -IrIII complexes. Initially, selective mono-metalation of [L1-H2 ]Br2 yielded an orthometalated IrIII - or non-orthometalated PdII -complex. Sequential metalation of the mono-IrIII complex resulted in the formation of heterobimetallic IrIII -PdII /AuI complexes. Similarly, a distinct heterobimetallic PdII -IrIII complex was synthesized starting from the mono-PdII complex. Further, the corresponding homobimetallic IrIII -IrIII and PdII -PdII complexes were directly obtained from [L1-H2 ]Br2 . Additionally, monometallic PdII and IrIII analogues were synthesized from [L2-H]Br and [L3-H]Br, respectively. The heterobimetallic IrIII -PdII and PdII -IrIII complexes were then evaluated as catalysts in various one-pot tandem catalytic reactions in which they demonstrated superior activity than the mixtures of both their corresponding homobimetallic IrIII -IrIII /PdII -PdII and monometallic IrIII /PdII counterparts, under the constant concentrations of metal centers. Moreover, while comparing complexes IrIII -PdII and PdII -IrIII , the former exhibits higher activity in all the studied reactions. All these findings suggest the presence of some form of cooperativity between the two metal centers (Ir and Pd) connected by a single ligand framework in IrIII -PdII and PdII -IrIII complex, with IrIII -PdII displaying better cooperativity that has been validated by electrochemical, NMR, and DFT studies.

N-Heterocyclic carbene and cyclic (alkyl)(amino)carbene ligated half-sandwich complexes of chromium(II) and chromium(I)

The synthesis and characterization of a series of Cr(II) N-Heterocyclic Carbene (NHC) complexes of the type [{Cr(NHC)Cl(μ-Cl)}2] and [(Cyp)Cr(NHC)X] (Cyp = η5-C5H5, cyclopentadienyl; η5-C5Me5, pentamethylcyclopentadienyl; X = Cl, η3-C3H5; NHC = IMeMe, IiPrMe, IMes, IDipp) as well as the cyclic (alkyl)(amino)carbene cAACMe ligated complexes [(η5-C5H5)Cr(cAACMe)X] (X = Cl, NPh2), [(η5-C9H7)Cr(cAACMe)Cl] (C9H7 = Ind, indenyl) and [(η5-C13H9)Cr(cAACMe)Cl] (C13H9 = Fl, fluorenyl) are reported. The reduction of [(η5-C5Me5)Cr(IMeMe)Cl] with KC8 in the presence of CO afforded the NHC ligated Cr(I) metallo-radical [(η5-C5Me5)Cr(IMeMe)(CO)2]. Quantum chemical calculations performed on [(η5-C5Me5)Cr(IMeMe)(CO)2] confirm for this complex a predominantly chromium centered radical.

Remote Steric and Electronic Effects of N-Heterocyclic Carbene Ligands on Alkene Reactivity and Regioselectivity toward Hydrocupration Reactions: The Role of Expanded-Ring N-Heterocyclic Carbenes

The remote groups in N-heterocyclic carbene (NHC) ligands have a significant influence on metal-catalyzed reactions. We examine how remote bulkiness, electronic groups, and expanded-ring NHCs (ER-NHCs) influence alkene reactivity and regioselectivity toward hydrocupration using density functional theory calculations. The impact of remote steric bulkiness on the Cu-H insertion rate is analyzed, revealing a strong correlation between the steric substituent constant and rate ratio, where a bulky group increases the rate due to reduced steric effects in the transition state (TS). The steric properties of the examined catalysts (with a remote group R2 = CPh3, CHPh2, CH2Ph, CH3, and H) and their corresponding TSs are found to be modulated greatly by the remote steric substitution group and the ring size of the NHC ligand. Enhanced bulkiness enhances the nucleophilic Cu-H moiety. The remote electronic groups have a smaller impact on insertion barrier compared to that of steric hindrance. Furthermore, ER-NHC exploration indicates that NHCs with over five-membered rings have a significantly negative influence on the reaction rate. Finally, with a highly bulky group (R2 = CPh3), anti-Markovnikov insertion preference is attributed to high interaction energy and improved steric properties. Overall, our findings here provide valuable insights for the development of a more effective catalyst in metal-catalyzed reactions.

N-Heterocyclic Carbene Boranes: Dual Reagents for the Synthesis of Gold Nanoparticles

N-Heterocyclic carbenes (NHCs) have drawn considerable interest in the field of nanomaterials chemistry as highly stabilizing ligands enabling the formation of strong and covalent carbon-metal bonds. Applied to gold nanoparticles synthesis, the most common strategy consists of the reduction of a preformed NHC-AuI complex with a large excess of a reducing agent that makes the particle size difficult to control. In this paper, we report the straightforward synthesis of NHC-coated gold nanoparticles (NHC-AuNPs) by treating a commercially available gold(I) precursor with an easy-to-synthesize NHC-BH3 reagent. The latter acts as both the reducing agent and the source of surface ligands operating under mild conditions. Mechanistic studies including NMR spectroscopy and mass spectrometry demonstrate that the reduction of gold(I) generates NHC-BH2 Cl as a by-product. This strategy gives efficient control over the nucleation and growth of gold particles by varying the NHC-borane/gold(I) ratio, allowing unparalleled particle size variation over the range of 4.9±0.9 to 10.0±2.7 nm. Our strategy also allows an unprecedented precise and controlled seeded growth of gold nanoparticles. In addition, the as-prepared NHC-AuNPs exhibit narrow size distributions without the need for extensive purification or size-selectivity techniques, and are stable over months.

N-heterocyclic carbene-mediated oxidation of copper(I) in an imidazolium ionic liquid

The aerobic oxidation of copper(I) to copper(II) was studied in the ionic liquid (IL) 1-n-butyl-3-methylimidazolium acetate [BMIm][OAc]. Temperatures above 100 °C promote the deprotonation of the C2 atom of the imidazolium ring and the dissolution of CuCl. 1H and 13C NMR spectra indicate the formation of the N-heterocyclic carbene (NHC) complex [NHC] CuICl under inert conditions. Upon aerobic oxidation, air-stable blue-green crystals of [BMIm]2[CuII 2(OAc)4Cl2] precipitate in high yield and the NHC is recovered. X-ray diffraction on a single-crystal of the complex salt revealed a monoclinic structure with space group P21/n. The centrosymmetric dinuclear acetate complex [Cu2(OAc)4Cl2]2– has the paddle-wheel motif and is weakly paramagnetic.

Fully Delocalized Mixed-Valent Cu1.5 Cu1.5 Complex: Strong Cu-Cu interaction and Fast Electron Self-Exchange Rate Despite Large Structural Changes

A flexible macrocyclic ligand with two tridentate {CNC} compartments can host two Cu ions in reversibly interconvertible states, Cu^I Cu^I (1) and mixed-valent Cu^1.5 Cu^1.5 (2). They were characterized by XRD and multiple spectroscopic methods, including EPR, UV/Vis absorption and MCD, in combination with TD-DFT and CASSCF calculations. 2 features a short Cu⋅⋅⋅Cu distance (≈2.5 Å; compared to ≈4.0 Å in 1) and a very high delocalization energy of 13 000 cm^-1 , comparable to the mixed-valent state of the biological Cu_A site. Electron self-exchange between 1 and 2 is rapid despite large structural reorganization, and is proposed to proceed via a sequential mechanism involving an active conformer of 1, viz. 1'; the latter has been characterized by XRD. Such electron transfer (ET) process is reminiscent of the conformationally gated ET proposed for biological systems. This redox couple is a unique pair of flexible dicopper complexes, achieving fast electron self-exchange closely related to the function of the Cu_A site.

Ag-NHC Complexes in the π-Activation of Alkynes

Silver-NHC (NHC = N-heterocyclic carbene) complexes play a special role in the field of transition-metal complexes due to (1) their prominent biological activity, and (2) their critical role as transfer reagents for the synthesis of metal-NHC complexes by transmetalation. However, the application of silver-NHCs in catalysis is underdeveloped, particularly when compared to their group 11 counterparts, gold-NHCs (Au-NHC) and copper-NHCs (Cu-NHC). In this Special Issue on Featured Reviews in Organometallic Chemistry, we present a comprehensive overview of the application of silver-NHC complexes in the p-activation of alkynes. The functionalization of alkynes is one of the most important processes in chemistry, and it is at the bedrock of organic synthesis. Recent studies show the significant promise of silver-NHC complexes as unique and highly selective catalysts in this class of reactions. The review covers p-activation reactions catalyzed by Ag-NHCs since 2005 (the first example of p-activation in catalysis by Ag-NHCs) through December 2022. The review focuses on the structure of NHC ligands and p-functionalization methods, covering the following broadly defined topics: (1) intramolecular cyclizations; (2) CO₂ fixation; and (3) hydrofunctionalization reactions. By discussing the role of Ag-NHC complexes in the p-functionalization of alkynes, the reader is provided with an overview of this important area of research and the role of Ag-NHCs to promote reactions that are beyond other group 11 metal-NHC complexes.

Impact of counteranions on N-heterocyclic carbene gold(i)-catalyzed cyclization of propargylic amide

N-Heterocyclic carbene (NHC) Au(i)-catalyzed organic synthesis has recently been receiving increasing attention, especially with the activation of alkynes. In contrast, counteranions, being widely problematic in Au(i)-catalyzed transformations, are commonly considered as innocent partners and are not respectably included in a computational model. Herein, we report density functional theory (DFT) investigations of the Au(i)-catalyzed cyclization of propargylic amides to exploit the mechanistic effect of several counteranions to shed some light for further future developments. Among the counteranions used in this study, NTf₂ ^-, ClO₄ ^-, TsO^-, TFA^-, TfO^-, MsO^-, and SbF₆ ^-, both the cyclization and protodeauration step favor the 5-exo-dig product over the 6-endo-dig product when the alkyne moiety is terminated with hydrogen. These anions reveal a crucial influence on the energy profile through lowering the barriers of the reaction. Mechanistically, the results obtained from all counteranions show that the protodeauration is slower than the cyclization. By using an energetic span model, the results clearly indicate that the rate-determining state is the protodeauration step for all counteranions, and thus protodeauration is the turnover-limiting step. The turnover frequency (TOF) results for the formation of the 5-exo-dig product show cyclization reactivity in the order of MsO^- > TFA^- > ClO₄ ^- > NTf₂ ^- > TfO^- > TsO^- ≫ SbF₆ ^-, whereas an order of TFA^- > MsO^- > NTf₂ ^- > TfO^- ≈ ClO₄ ^- > SbF₆ ^- ⋙ TsO^- is calculated for the protodeauration, suggesting that SbF₆ ^- and TsO^- are disfavored due to their slow protodeauration. In this regard, and for the 6-endo-dig pathway, our conclusions demonstrate an order of TfO^- > TFA^- > MsO^- > NTf₂ ^- > ClO₄ ^- > TsO^- ⋙ SbF₆ ^- for the cyclization and TFA^- > TsO^- > MsO^- > TfO^- > NTf₂ ^- > ClO₄ ^- ⋙ SbF₆ ^- for the protodeauration, advocating that the anions SbF₆ ^-, NTf₂ ^- and ClO₄ ^- are unlikely partners for the 6-endo-dig pathway because of their slow protodeauration. Finally, the findings here advise that any engineering of the counteranion to increase the efficiency of catalytic system would be more effective on the protodeauration step rather than the cyclization step.

Luminescent Complexes of Platinum, Iridium, and Coinage Metals Containing N-Heterocyclic Carbene Ligands: Design, Structural Diversity, and Photophysical Properties

The employment of N-heterocyclic carbenes (NHCs) to design luminescent metal compounds has been the focus of recent intense investigations because of the strong σ-donor properties, which bring stability to the whole system and tend to push the d-d dark states so high in energy that they are rendered thermally inaccessible, thereby generating highly emissive complexes for useful applications such as organic light-emitting diodes (OLEDs), or featuring chiroptical properties, a field that is still in its infancy. Among the NHC complexes, those containing organic chromophores such as naphthalimide, pyrene, and carbazole exhibit rich emission behavior and thus have attracted extensive interest in the past five years, especially carbene coinage metal complexes with carbazolate ligands. In this review, the design strategies of NHC-based luminescent platinum and iridium complexes with large spin-orbit-coupling (SOC) are described first. Subsequent paragraphs illustrate the recent advances of luminescent coinage metal complexes with nucleophilic- and electrophilic-based carbenes based on silver, gold, and copper metal complexes that have the ability to display rich excited state emissions in particular via thermally activated delayed fluorescence (TADF). The luminescence mechanism and excited state dynamics are also described. We then summarize the advance of NHC-metal complexes in the aforementioned fields in recent years. Finally, we propose the development trend of this fast-growing field of luminescent NHC-metal complexes.

Mechanochemical solid state synthesis of copper(I)/NHC complexes with K3PO4

A protocol for the mechanochemical synthesis of copper(I)/N-heterocyclic carbene complexes using cheap and readily available K₃PO₄ as base has been developed. This method employing a ball mill is amenable to typical simple copper(I)/NHC complexes but also to a sophisticated copper(I)/N-heterocyclic carbene complex bearing a guanidine moiety. In this way, the present approach circumvents commonly employed silver(I) complexes which are associated with significant and undesired waste formation and the excessive use of solvents. The resulting bifunctional catalyst has been shown to be active in a variety of reduction/hydrogenation transformations employing dihydrogen as terminal reducing agent.

Alternating Ring-Opening Metathesis Polymerization Promoted by Ruthenium Catalysts Bearing Unsymmetrical NHC Ligands

In this paper, Grubbs- and Hoveyda–Grubbs-type olefin metathesis catalysts featuring N-cyclopentyl/N’-mesityl backbone-substituted N-heterocyclic carbene (NHC) ligands were synthesized. Their propensity to promote the alternating ring-opening metathesis copolymerization (ROMP) of norbornene (NBE) with cyclooctene (COE) or cyclopentene (CPE) was evaluated and compared to that shown by analogous N-cyclohexyl complexes. High degrees of chemoselectivity were achieved in both copolymerizations. The presence of the N-cyclopentyl substituent allowed for the achievement of up to 98% and 97% of alternating diads for NBE-COE and NBE-CPE copolymers, respectively, at low comonomer ratios. Density functional theory (DFT) studies showed that both the sterical and electronic effects of NHC ligands influence catalyst selectivity.

Fully Tin-Coated Coinage Metal Ions: A Pincer-Type Bis-stannylene Ligand for Exclusive Tetrahedral Complexation

The synthesis of a novel bis-stannylene pincer ligand and its complexation with coinage metals (Cu^I , Ag^I and Au^I ) are described. All coinage metal centres are in tetrahedral coordination environments in the solid state and are exclusively coordinated by four neutral Sn^II donors. ¹¹⁹ Sn NMR provided information about the behaviour in solution. All of the isolated compounds have photoluminescent properties, and these were investigated at low and elevated temperatures. Compared to the free bis-stannylene ligand, coordination to coinage metals led to an increase in the luminescence intensity. The new compounds were investigated in detail through all-electron relativistic density functional theory (DFT) calculations.

Theoretical investigation of C1-C4 hydrocarbons adsorption and separation in a porous metallocavitand

The purification of light hydrocarbons is one of the most important chemical processes globally which consumes substantial energy. Porous materials are likely to improve the efficiency of the separation process by acting as regenerable solid adsorbents. To investigate such translational systems, the underlying mechanism of adsorption in the porous materials must be taken into account. Herein we report the adsorption and selective separation of C1-C4 hydrocarbons in the coinage metal-based macrocyclic metallocavitand Pillarplex, which exhibits excellent performance in the adsorption of CH4 at the ambient conditions with a binding energy of -17.9 kcal mol-1. In addition, the endohedral adsorption of C2-C4 hydrocarbon is impressive. The CH4, C2H4, C3H4, and 1,3-butadiene have potential uptake of 2.57, 4.26, 3.60, and 2.95 mmol g-1, respectively at ambient conditions are highest from their respective isomers. Selective separation of C1-C4 hydrocarbons is studied using ideal adsorption solution theory demonstrating its potential for one-step purification of C1-C3 hydrocarbons.

β-Aminosulfonyl Fluorides via Water-Accelerated N-Heterocyclic Carbene Catalysis

Herein, a water-accelerated, N-heterocyclic carbene (NHC)-catalyzed aza-Michael addition reaction was reported to access β-aminosulfonyl fluorides, which are key hubs of the sulfur(VI) fluoride exchange (SuFEx) reaction. As a crucial reaction medium, water considerably enhanced the reaction rate with excellent chemo- and site-selectivity (up to >99 : 1) compared to conventional solvents. In addition, the late-stage ligation of bioactive molecules with the aliphatic β-amino SuFEx hub was demonstrated. Mechanistic studies on experimental, analytical, and computational approaches support noncovalent activation over NHC catalysis "on-water".

Enantioselective Cyclopropanation Catalyzed by Gold(I)-Carbene Complexes

The formation of polysubstituted cyclopropane derivatives in the gold(I)-catalyzed reaction of olefins and propargylic esters is a potentially useful transformation to generate diversity, therefore any method in which its stereoselectivity could be controlled is of significant interest. We prepared and tested a series of chiral gold(I)-carbene complexes as a catalyst in this transformation. With a systematic optimization of the reaction conditions, we were able to achieve high enantioselectivity in the test reaction while the cis:trans selectivity of the transformation was independent of the catalyst. Using the optimized conditions, we reacted a series of various olefins and acetylene derivatives to find that, although the reactions proceeded smoothly and the products were usually isolated in good yield and with good to exclusive cis selectivity, the observed enantioselectivity varied greatly and was sometimes moderate at best. We were unable to establish any structure-property relationship, which suggests that for any given reagent combination, one has to identify individually the best catalyst.

C2-Symmetric N-Heterocyclic Carbenes in Asymmetric Transition-Metal Catalysis

The last decades have witnessed a rapid growth of applications of N-heterocyclic carbenes (NHCs) in different chemistry fields. Due to their unique steric and electronic properties, NHCs have become a powerful tool in coordination chemistry, allowing the preparation of stable metal-ligand frameworks with both main group metals and transition metals. An overview on the use of five membered monodentate C2-symmetric N-heterocyclic carbenes (NHCs) as ligands for transition-metal complexes and their most relevant applications in asymmetric catalysis is offered.

N-Heterocyclic carbene and cyclic (alkyl)(amino)carbene complexes of vanadium(III) and vanadium(V)

[VCl₃(THF)₃] offers a convenient entrance point into the chemistry of carbene stabilized V(III) complexes. Herein we report the paramagnetic mono- and biscarbene complexes [VCl₃(cAAC^Me)] 1, [VCl₃(cAAC^Me)(THF)] 1(thf), [VCl₃(IMes)] 2, [{VCl₂(IiPr^Me)(μ-Cl)}₂] 3, [VCl₃(IDipp)] 4, [VCl₃(SIDipp)] 5, [VCl₃(SIDipp)(THF)] 5(thf), [VCl₃(ItBu)] 6, [VCl₃(cAAC^Me)₂] 7 and [VCl₃(IiPr^Me)₂] 8. Reaction of 1 with MesMgCl, MesLi and LiNPh₂ afforded the complexes [VCl₂(Mes)(cAAC^Me)] 9, [cAAC^MeH]⁺[VCl₂Mes₂]^-10 and [VCl₂(NPh₂)(cAAC^Me)] 11. The V(V) complexes [V(O)Cl₃(IDipp)] 12 and [V(O)Cl₃(SIDipp)] 13 were selectively prepared from oxygen oxidation of 4 and 5. [V(O)Cl₃(IDipp)] 12 and [V(O)Cl₃(IMes)] react with isocyanates to yield the NHC-ligated imido complexes [V(N-p-CH₃C₆H₄)Cl₃(IDipp)] 14, [V(N-p-FC₆H₄)Cl₃(IDipp)] 15, [V(N-p-CH₃C₆H₄)Cl₃(SIDipp)] 16, [V(N-p-FC₆H₄)Cl₃(SIDipp)] 17, [V(N-p-CH₃C₆H₄)Cl₃(IMes)] 18 and [V(N-p-FC₆H₄)Cl₃(IMes)] 19.

Synthesis of N-Heterocyclic Carbenes and Their Complexes by Chloronium Ion Abstraction from 2-Chloroazolium Salts Using Electron-Rich Phosphines

N-Heterocyclic carbenes (NHCs) are commonly prepared by deprotonation of azolium salts using strong anionic bases. This reaction is often unselective, yielding alkali metal NHC complexes or dimerized NHCs. Alternatively, free NHCs are obtained by the dechlorination of 2-chloroazolium salts using electron-rich phosphines. PPh3 , PCy3 , and PtBu3 are unsuitable for Cl+ abstraction, while the sterically encumbered tris(1,3-tert-butylimidazolidin-2-ylidenamino)phosphine 1 selectively removes Cl+ from 2-chloroazolium salts. Since bulky 1 does not bind to metal complexes, it was used for the preparation of NHC complexes via in situ Cl+ abstraction from 2-chloroazolium salts. The dechlorination was employed for the site-selective monometallation with IrI , IrIII , RhI , RhIII , and RuII of a bis-NHC precursor composed of a 2-chlorobenzimidazolium and a 2-chlorobenzimidazole group, followed by the preparation of the heterobimetallic IrIII /PdII complex [18](BF4 )2 by a dechlorination/oxidative addition reaction sequence.

Chirality influence on the cytotoxic properties of anionic chiral bis(N-heterocyclic carbene)silver complexes

Complexes Na₃[Ag(NHC^R)₂], 2a-e and 2b'-c', where NHC^R is a N-heterocyclic carbene of the 2,2'-(1H-2λ³,3λ⁴-imidazole-1,3-diyl)dicarboxylate type, were prepared by treatment of compounds HL^R, 1a-e and 1b'-c' (2-(1-(carboxyalkyl)-1H-imidazol-3-ium-3-yl)carboxylate), with silver oxide in the presence of aqueous sodium hydroxide. They were characterized by analytical, spectroscopic (infrared, IR, ¹H and ¹³C nuclear magnetic resonance, NMR, and circular dichroism) and X-ray methods (2a). In the solid state, the anionic part of complex 2a, [Ag(NHC^H)₂]^3-, shows a linear disposition of C_carbene-Ag-C_carbene atoms and an eclipsed conformation of the two NHC ligands. The proposed bis(NHC) nature of the silver complexes was maintained in solution according to NMR and density functional theory (DFT) calculations. The cytotoxic activity of compounds 2 was evaluated against four cancer cell lines and one non-cancerous cell line and several structure-activity correlations were found for these complexes. For instance, the activity decreased when the bulkiness of the R alkyl group in Na₃[Ag(NHC^R)₂] increased. More interesting is the detected chirality-anticancer relationship, where complexes Na₃[Ag{(S,S)-NHC^R}₂] (R = Me, 2b; ⁱPr, 2c) showed better anticancer activity than those of their enantiomeric derivatives Na₃[Ag{(R,R)-NHC^R}₂] (R = Me, 2b'; ⁱPr, 2c').

Carbene chemistry of arsenic, antimony, and bismuth: origin, evolution and future prospects

The discovery of the first isolable N-heterocyclic carbene in 1991 ushered in a new era in coordination chemistry. The remarkable bonding properties of carbenes have led to their rapid proliferation as auxiliary ligands for a wide range of transition metals and main group elements. In the case of group 15, while carbene-stabilized nitrogen and phosphorus compounds are extensively studied, the scope of research has shrunk significantly from arsenic to bismuth. This is essentially attributed to the decrease in stability of the C-E bond upon descending the group. Even so, modulating the carbene backbone or introducing alternative synthetic strategies not only alleviates the stability issues but also offers promising results in terms of the bonding and reactivities of these compounds. The purpose of the present perspective is to provide a comprehensive overview of the origins and development of carbene chemistry of arsenic, antimony, and bismuth, as well as to highlight the future prospects of this field.

3D vs. turbostratic: controlling metal-organic framework dimensionality via N-heterocyclic carbene chemistry

Using azolium-based ligands for the construction of metal-organic frameworks (MOFs) is a viable strategy to immobilize catalytically active N-heterocyclic carbenes (NHC) or NHC-derived species inside MOF pores. Thus, in the present work, a novel copper MOF referred to as Cu-Sp5-BF4, is constructed using an imidazolinium ligand, H2Sp5-BF4, 1,3-bis(4-carboxyphenyl)-4,5-dihydro-1H-imidazole-3-ium tetrafluoroborate. The resulting framework, which offers large pore apertures, enables the post-synthetic modification of the C2 carbon on the ligand backbone with methoxide units. A combination of X-ray diffraction (XRD), solid-state nuclear magnetic resonance (ssNMR) and electron microscopy (EM), are used to show that the post-synthetic methoxide modification alters the dimensionality of the material, forming a turbostratic phase, an event that further improves the accessibility of the NHC sites promoting a second modification step that is carried out via grafting iridium to the NHC. A combination of X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) methods are used to shed light on the iridium speciation, and the catalytic activity of the Ir-NHC containing MOF is demonstrated using a model reaction, stilbene hydrogenation.

Copper(II) NHC Catalyst for the Formation of Phenol from Arylboronic Acid

Arylboronic acids are commonly used in modern organic chemistry to form new C-C and C-heteroatom bonds. These activated organic synthons show reactivity with heteroatoms in a range of substrates under ambient oxidative conditions. This broad reactivity has limited their use in protic, renewable solvents like water, ethanol, and methanol. Here, we report our efforts to study and optimize the activation of arylboronic acids by a copper(II) N-heterocyclic carbene (NHC) complex in aqueous solution and in a range of alcohols to generate phenol and aryl ethers, respectively. The optimized reactivity showcases the ability to make targeted C-O bonds, but also identifies conditions where water and alcohol activation could be limiting for C-C and C-heteroatom bond-forming reactions. This copper(II) complex shows strong reactivity toward arylboronic acid activation in aqueous medium at ambient temperature. The relationship between product formation and temperature and catalyst loading are described. Additionally, the effects of buffer, pH, base, and co-solvent are explored with respect to phenol and ether generation reactions. Characterization of the new copper(II) NCN-pincer complex by X-ray crystallography, HR-MS, cyclic voltammetry, FT-IR and UV-Vis spectral studies is reported.