Dehydrogenation as a Substrate-Activating Strategy in Homogeneous Transition-Metal Catalysis

Electrochemical Dimerization of o-Aminophenols and Hydrogen Borrowing-like Cascade to Synthesize N-Monoalkylated Aminophenoxazinones via Paired Electrolysis

A novel electrocatalytic dimerization of o-aminphenols and a hydrogen borrowing-like cascade for synthesizing N-monoalkylated aminophenoxazinones have been developed. This electrocatalytic reaction uses a constant current mode in an undivided cell and is free of metal catalysis, open to the air, and eco-friendly. In particular, this protocol exhibits a wide substrate range and provides versatile N-monoalkylated aminophenoxazinones in medium to good yields. The results of our mechanistic research reveal that this protocol involves a cascade of electrochemical cyclocondensation of o-aminphenols and the hydrogen transfer process via paired electrolysis.

Site- and Enantioselective Homobenzylic C(sp3)-H Borylation via Dehydrogenation of Alkyl Chains

A one-pot, dehydrogenation-based Ir/Co/Cu triple catalysis has been developed for formal asymmetric borylation of homobenzylic C(sp3)-H bonds, furnishing enantioenriched organoboronates with a β-stereocenter directly from simple arylalkanes. Mechanistic studies indicate that the Ir catalyst is responsible for dehydrogenation of arylalkanes to 1-arylalkenes, followed by Cu-catalyzed regio- and enantioselective protoboration of (E)-arylalkenes; the introduction of Co-catalyzed stereoisomerization of the (Z)-alkenes to (E)-isomers was found to have a beneficial effect on the productivity and enantioselectivity.

β-Methylation of Primary Alcohols with Methanol Catalyzed by a Metal-Ligand Bifunctional Iridium Catalyst

The development of efficient methods for the direct introduction of a methyl group into molecules is becoming increasingly important. Herein, the β-methylation of primary alcohols with methanol has been accomplished under environmentally benign conditions using [Cp*Ir(2,2'-bpyO)(H2O)] as a catalyst. It was found that functional groups in the ligand are crucially important for the activity of the iridium complex. Furthermore, the mechanistic research and application potential of our catalytic system are also presented.

Iron-Catalyzed sp3 C-H Alkylation of Fluorene with Primary and Secondary Alcohols: A Borrowing Hydrogen Approach

The utilization of earth-abundant, cheap, and nontoxic transition metals in important catalytic transformations is essential for sustainable development, and iron has gained significant attention as the most abundant transition metal. A mixture of FeCl2 (3 mol %), phenanthroline (6 mol %), and KOtBu (0.4 eqivalent) was used as an effective catalyst for the sp3 C-H alkylation of fluorene using alcohol as a nonhazardous alkylating partner, and eco-friendly water was formed as the only byproduct. The substrate scope includes a wide range of substituted fluorenes and substituted benzyl alcohols. The reaction is equally effective with challenging secondary alcohols and unactivated aliphatic alcohols. Selective mono-C9-alkylation of fluorenes with alcohols yielded the corresponding products in good isolated yields. Various postfunctionalizations of C-9 alkylated fluorene products were performed to establish the practical utility of this catalytic alkylation. Control experiments suggested a homogeneous reaction path involving borrowing hydrogen mechanism with the formation and subsequent reduction of 9-alkylidene fluorene intermediate.

Synthesis of N-heterocycles through alcohol dehydrogenative coupling

Nitrogen heterocycles are found in the structures of many biologically important compounds, as well as materials used in the synthesis of fine chemicals. Notably, ~59% of US Food and Drug Administration-approved small-molecule drugs contain nitrogen heterocycles. It is therefore meaningful to explore greener or more sustainable methods for their synthesis. The use of alcohols as reagents is attractive as they can be readily obtained from biomass derived natural resources. In the last two decades, alcohol dehydrogenative coupling reaction to synthesize various heterocycles were extensively explored which furnished hydrogen (H2) and water (H2O) as the two greener byproducts. In this protocol, we describe several efficient catalytic transformations to synthesize quinolines, 1,8-naphthyridines, quinoxalines, quinazolines, pyrimidines, benzimidazoles, pyrroles and pyridines, using alcohol as starting materials. We also describe the synthesis of several homogeneous iridium/ruthenium catalysts and heterogeneous cobalt/copper catalysts that can be used in these transformations. The reaction setup is simple; in a Schlenk/reaction tube with magnetic stir-bar, alcohol, corresponding coupling reagents (nucleophiles), catalyst, base and solvent (water or organic solvent such as toluene, dioxane or p-xylene) are added. The reaction mixture is refluxed at the specified temperature (110-150 °C)-either in air or under argon-to furnish these heterocycles. Synthesis of the catalysts takes 3-5 h and the coupling reactions take 4-5 h depending on the target product. The cobalt- and copper-based heterogeneous catalytic systems displayed an good catalyst recyclability.

Thermodynamic Modulation of Dihydrogen Activation Through Rational Ligand Design in GeII-Ni0 Complexes

A family of chelating aryl-functionalized germylene ligands has been developed and employed in the synthesis of their corresponding 16-electron Ni0 complexes (PhiPDippGeAr·Ni·IPr; PhiPDipp = {[Ph2PCH2Si(iPr)2](Dipp)N}-; IPr = [{(H)CN(Dipp)}2C:]; Dipp = 2,6-iPr2C6H3). These complexes demonstrate the ability to cooperatively and reversibly activate dihydrogen at the germylene-nickel interface under mild conditions (1.5 atm H2, 298 K). We show that the thermodynamics of the dihydrogen activation process can be modulated by tuning the electronic nature of the germylene ligands, with an increase in the electron-withdrawing character displaying more exergonic ΔG298 values, as ascertained through NMR spectroscopic Van't Hoff analyses for all systems. This is also shown to correlate with experimental 31P NMR and UV/vis absorption data as well as with computationally derived parameters such as Ge-Ni bond order and Ni/Ge NPA charge, giving a thorough understanding of the modulating effect of ligand design on this reversible, cooperative bond activation reaction. Finally, the utility of this modulation was demonstrated in the catalytic dehydrocoupling of phenylsilane, whereby systems that disfavor dihydrogen activation are more efficient catalysts, aligning with H2-elimination being the rate-limiting step. A density functional theory analysis supports cooperative activation of the Si-H moiety in PhSiH3.

Poly(2,2'-Bibenzimidazole)-Supported Iridium Complex: A Recyclable Metal-Polymer Ligand Bifunctional Catalyst for the N-Methylation of Amines with Methanol

The design and development of new types of catalysts is one of the most important topics for modern chemistry. Herein, a polymer-supported iridium complex Cp*Ir@Poly(2,2'-BiBzIm) was designed and synthesized by the coordinative immobilization of [Cp*IrCl2]2 on 2,2'-bibenzimidazoles. In the presence of the catalyst (0.5 mol % Ir) and Cs2CO3 (0.3 equiv), a variety of N-methylated amines were obtained in high yields with complete selectivity. More importantly, the catalyst could be recycled without an obvious loss of activity for six cycles. Apparently, the designed catalyst combines the advantages of both homogeneous and heterogeneous catalysis.

Direct ketone synthesis from primary alcohols and alkenes enabled by a dual photo/cobalt catalysis

Catalytic methods to couple alcohol and alkene feedstocks are highly valuable in synthetic chemistry. The direct oxidative coupling of primary alcohols and alkenes offers a streamlined approach to ketone synthesis. Currently, available methods are based on transition metal-catalyzed alkene hydroacylation, which involves the generation of an electrophilic aldehyde intermediate from primary alcohol dehydrogenation. These methods generally require high reaction temperatures and a high loading of precious metal catalysts and are predominantly effective for branch-selective reactions with electron-rich alkenes. Herein, we designed a dual photo/cobalt-catalytic method to manipulate the reactivity of nucleophilic ketyl radicals for the synthesis of ketones from primary alcohols and alkenes in complementary reactivity and selectivity. This protocol exhibits exceptional scope across both primary alcohols and alkenes with high chemo- and regio-selectivity under mild reaction conditions. Mechanism investigations reveal the essential role of cobalt catalysis in enabling efficient catalysis and broad substrate scope.

Manganese catalyzed chemo-selective synthesis of acyl cyclopentenes: a combined experimental and computational investigation

Cyclopentenes serve as foundational structures in numerous natural products and pharmaceuticals. Consequently, the pursuit of innovative synthetic approaches to complement existing protocols is of paramount importance. In this context, we present a novel synthesis route for acyl cyclopentenes through a cascade reaction involving an acceptorless-dehydrogenative coupling of cyclopropyl methanol with methyl ketone, followed by a radical-initiated ring expansion rearrangement of the in situ formed vinyl cyclopropenone intermediate. The reaction, catalyzed by an earth-abundant metal complex, occurs under milder conditions, generating water and hydrogen gas as byproducts. Rigorous control experiments and detailed computational studies were conducted to unravel the underlying mechanism. The observed selectivity is explained by entropy-driven alcohol-assisted hydrogen liberation from an Mn-hydride complex, prevailing over the hydrogenation of unsaturated cyclopentenes.

Selective N-Alkylation of Aminobenzenesulfonamides with Alcohols for the Synthesis of Amino-(N-alkyl)benzenesulfonamides Catalyzed by a Metal-Ligand Bifunctional Ruthenium Catalyst

[(p-Cymene)Ru(2,2'-bpyO)(H2O)] was proven to be an efficient catalyst for the synthesis of amino-(N-alkyl)benzenesulfonamides via selective N-alkylation of aminobenzenesulfonamides with alcohols. It was confirmed that functional groups in the bpy ligand are crucial for the activity of catalysts. Furthermore, the utilization of this catalytic system for the preparation of a biologically active compound was presented.

Cp*Ir(III) complexes catalyzed solvent-free synthesis of quinolines, pyrroles and pyridines via an ADC strategy

A trio of Ir(III) complexes that are held together by a picolinamidato moiety were created. In our earlier research, we demonstrated the catalytic activity of the complexes for producing alpha-alkylated ketones from a ketone or secondary alcohol with a primary alcohol in the presence of a catalytic amount of a Cp*Ir(III) catalyst and tBuOK in toluene at 110 °C using the hydrogen-borrowing technique. Earlier many research groups had synthesized quinoline, pyrrole, and pyridine derivatives using 2-amino alcohol and ketone or secondary alcohol derivatives as starting materials, but in all those cases the reaction conditions are not suitable in terms of green synthesis like more catalyst loading, base loading, long reaction time, and high temperature. In addition, most of the reactions contain phosphine a hazardous by-product, along with the catalyst. Keeping in mind these shortcomings, we tried to expand the use of our catalysts after achieving an excellent result in our previous work, and we were successful in producing quinoline, pyrrole, and pyridine derivatives through acceptor-less dehydrogenative coupling (ADC) procedures at 90-110 °C under neat/solvent-free conditions and achieved good to exceptional yields of those nitrogen-containing heterocycles. This methodology is attractive because it is environmentally benign and allows for the "green" synthesis of nitrogen-containing heterocycles. All that is required is a modest quantity of catalyst and base, and the by-products are merely H2O and H2.

Borrowing hydrogen C-alkylation with secondary saturated heterocyclic alcohols

The borrowing hydrogen methodology (BH) has emerged as a powerful tool for the rapid construction of C-C bonds, offering a greener alternative to traditional multi-step syntheses. This methodology involves the activation of inactivated alcohols followed by condensation or aldolization, ultimately leading to the regeneration of the saturated product. Herein, we report the C-alkylation of a hindered ketone with challenging secondary saturated heterocyclic alcohols. Our study encompasses the optimization of reaction conditions using either an iridium or a ruthenium catalyst and exploration of substrate scope. We demonstrate the efficient synthesis of substituted pyrrolidines and piperidines directly from a triol precursor, showcasing the versatility of this methodology. Moreover, we illustrate the post-functionalization of BH products, significantly broadening their chemical utility.

A Phosphine-Oxide Cobalt(II) Complex and Its Catalytic Activity Studies toward Alcohol Dehydrogenation Triggered Direct Synthesis of Imines and Quinolines

Herein, a new pincer-like amino phosphine donor ligand, H2L1, and its phosphine-oxide analog, H2L2, were synthesized. Subsequently, cobalt(II) complexes 1 and 2 were synthesized by the reaction of anhydrous Co(II)Cl2 with ligands H2L1 and H2L2, respectively. The ligands and complexes were fully characterized by various physicochemical and spectroscopic characterization techniques. Finally, the identity of the complexes 1 and 2 was confirmed by single crystal X-ray structure determination. The phosphine ligand containing complex 1 was converted to the phosphine oxide ligand containing complex 2 in air in acetonitrile solution. Both complexes 1 and 2 were investigated as precatalysts for alcohol dehydrogenation-triggered synthesis of imines in air. The phosphine-oxide complex 2 was more efficient than the phosphine complex 1. A wide array of alcohols and amines were successfully reacted in a mild condition to result in imines in good to excellent yields. Precatalyst 2 was also highly efficient for the synthesis of varieties of quinolines in air. As H2L2 in 2 has side arms that can be deprotonated, we investigated complex 2 for its base (KOtBu) promoted deprotonation events by various spectroscopic studies and DFT calculations. These studies have shown that mono deprotonation of the amine side arm attached to the pyridine is quite feasible, and deprotonation of complex 2 leads to a dearomatized pyridyl ring containing complex 2a. The mechanistic investigations of the catalytic reaction, by a combination of experimental and computational studies, have suggested that the dearomatized complex, 2a acted as an active catalyst. The reaction proceeded through the hydride transfer pathway. The activation barrier of this step was calculated to be 26.5 kcal/mol, which is quite consistent with the experimental reaction temperature under aerobic conditions. Although various pincer-like complexes are explored for such reactions, phosphine oxide ligand-containing complexes are still unexplored.

A facile synthesis of α,β-unsaturated imines via palladium-catalyzed dehydrogenation

The dehydrogenation adjacent to an electron-withdrawing group provides an efficient access to α,β-unsaturated compounds that serving as versatile synthons in organic chemistry. However, the α,β-desaturation of aliphatic imines has hitherto proven to be challenging due to easy hydrolysis and preferential dimerization. Herein, by employing a pre-fluorination and palladium-catalyzed dehydrogenation reaction sequence, the abundant simple aliphatic amides are amendable to the rapid construction of complex molecular architectures to produce α,β-unsaturated imines. Mechanistic investigations reveal a Pd(0)/Pd(II) catalytic cycle involving oxidative H-F elimination of N-fluoroamide followed by a smooth α,β-desaturation of the in-situ generated aliphatic imine intermediate. This protocol exhibits excellent functional group tolerance, and even the carbonyl groups are compatible without any competing dehydrogenation, allowing for late-stage functionalization of complex bioactive molecules. The synthetic utility of this transformation has been further demonstrated by a diversity-oriented derivatization and a concise formal synthesis of (±)-alloyohimbane.

Alcohols as Substrates in Transition-Metal-Catalyzed Arylation, Alkylation, and Related Reactions

Alcohols are abundant and attractive feedstock molecules for organic synthesis. Many methods for their functionalization require them to first be converted into a more activated derivative, while recent years have seen a vast increase in the number of complexity-building transformations that directly harness unprotected alcohols. This Review discusses how transition metal catalysis can be used toward this goal. These transformations are broadly classified into three categories. Deoxygenative functionalizations, representing derivatization of the C-O bond, enable the alcohol to act as a leaving group toward the formation of new C-C bonds. Etherifications, characterized by derivatization of the O-H bond, represent classical reactivity that has been modernized to include mild reaction conditions, diverse reaction partners, and high selectivities. Lastly, chain functionalization reactions are described, wherein the alcohol group acts as a mediator in formal C-H functionalization reactions of the alkyl backbone. Each of these three classes of transformation will be discussed in context of intermolecular arylation, alkylation, and related reactions, illustrating how catalysis can enable alcohols to be directly harnessed for organic synthesis.

Harnessing alcohols as sustainable reagents for late-stage functionalisation: synthesis of drugs and bio-inspired compounds

Alcohol is ubiquitous with unparalleled structural diversity and thus has wide applications as a native functional group in organic synthesis. It is highly prevalent among biomolecules and offers promising opportunities for the development of chemical libraries. Over the last decade, alcohol has been extensively used as an environmentally friendly chemical for numerous organic transformations. In this review, we collectively discuss the utilisation of alcohol from 2015 to 2023 in various organic transformations and their application toward intermediates of drugs, drug derivatives and natural product-like molecules. Notable features discussed are as follows: (i) sustainable approaches for C-X alkylation (X = C, N, or O) including O-phosphorylation of alcohols, (ii) newer strategies using methanol as a methylating reagent, (iii) allylation of alkenes and alkynes including allylic trifluoromethylations, (iv) alkenylation of N-heterocycles, ketones, sulfones, and ylides towards the synthesis of drug-like molecules, (v) cyclisation and annulation to pharmaceutically active molecules, and (vi) coupling of alcohols with aryl halides or triflates, aryl cyanide and olefins to access drug-like molecules. We summarise the synthesis of over 100 drugs via several approaches, where alcohol was used as one of the potential coupling partners. Additionally, a library of molecules consisting over 60 fatty acids or steroid motifs is documented for late-stage functionalisation including the challenges and opportunities for harnessing alcohols as renewable resources.

Cobalt-Catalyzed Acceptorless Dehydrogenation of Primary Amines to Nitriles

The direct double dehydrogenation from primary amines to nitriles without an oxidant or hydrogen acceptor is both intriguing and challenging. In this paper, we describe a non-noble metal catalyst capable of realizing such a transformation with high efficiency. A cobalt-centered N,N-bidentate complex was designed and employed as a metal-ligand cooperative dehydrogenation catalyst. Detailed kinetic studies, control experiments, and DFT calculations revealed the crucial hydride transfer, proton transfer, and hydrogen evolution processes. Finally, a tandem outer-sphere/inner-sphere mechanism was proposed for the dehydrogenation of amines to nitriles through an imine intermediate.

Leveraging the Stereochemical Complexity of Octahedral Diastereomeric-at-Metal Catalysts to Unlock Regio-, Diastereo-, and Enantioselectivity in Alcohol-Mediated C-C Couplings via Hydrogen Transfer

Experimental and computational studies illuminating the factors that guide metal-centered stereogenicity and, therefrom, selectivity in transfer hydrogenative carbonyl additions of alcohol proelectrophiles catalyzed by chiral-at-metal-and-ligand octahedral d6 metal ions, iridium(III) and ruthenium(II), are described. To augment or invert regio-, diastereo-, and enantioselectivity, predominantly one from among as many as 15 diastereomeric-at-metal complexes is required. For iridium(III) catalysts, cyclometalation assists in defining the metal stereocenter, and for ruthenium(II) catalysts, iodide counterions play a key role. Whereas classical strategies to promote selectivity in metal catalysis aim for high-symmetry transition states, well-defined low-symmetry transition states can unlock selectivities that are otherwise difficult to achieve or inaccessible.

Phenalenyl-Based Photocatalyst for Bioinspired Oxidative Dehydrogenation of N-Heterocycles and Benzyl Alcohols

The environmental benefits of molecular oxygen as the oxidizing agent in oxidation reactions that synthesize fine chemicals cannot be overstated. Increased interest in developing robust photocatalysts is stimulated by the fact that the current photocatalytic transformation boom has made previously inaccessible synthetic approaches possible. Motivated by enzymatic catalysis, employing a reusable phenalenyl-based photocatalyst, we have successfully developed oxidative dehydrogenation utilizing molecular oxygen as a greener oxidant. Under photoinduced oxidative dehydrogenation conditions, different types of saturated N-heterocycles and alcohols were successfully dehydrogenated. The versatility of this bioinspired protocol is demonstrated by the fact that a wide variety of N-heteroaromatics, such as quinoline, carbazole, quinoxaline, acridine, and indole derivatives, as well as aldehydes and ketones, were successfully synthesized. Detailed mechanistic studies validate the proposed mechanism. Fluorescence lifetime and CV experiments revealed the crucial role of water on the efficiency of the reaction. The present protocol also provides chemoselectivity and scalability, leading to superior results and allowing for the functionalization of bioactive molecules at a late stage in a sustainable manner.

Formaldehyde-Mediated Hydride Liberation of Alkylamines for Intermolecular Reactions in Hexafluoroisopropanol

The ability of alkylamines to spontaneously liberate hydride ions is typically restrained, except under specific intramolecular reaction settings. Herein, we demonstrate that this reactivity can be unlocked through simple treatment with formaldehyde in hexafluoroisopropanol (HFIP) solvent, thereby enabling various intermolecular hydride transfer reactions of alkylamines under mild conditions. Besides transformations of small molecules, these reactions enable unique late-stage modification of complex peptides. Mechanistic investigations uncover that the key to these intermolecular hydride transfer processes lies in the accommodating conformation of solvent-mediated macrocyclic transition states, where the aggregates of HFIP molecules act as dexterous proton shuttles. Importantly, negative hyperconjugation between the lone electron pair of nitrogen and the antibonding orbital of amine's α C-H bond plays a critical role in the C-H activation, promoting its hydride liberation.

Upgrading Ethanol to n-Butanol in the Presence of Carbonate Catalyzed by a Cp*Ir Complex Bearing a Functional 2,2'-Carbonylbibenzimidazole Ligand

Upgrading ethanol to n-butanol as biofuels is an important topic for sustainable chemistry. Herein, a Cp*Ir complex bearing a functional 2,2'-carbonylbibenzimidazole ligand [Cp*Ir(2,2'-COBiBzImH2)Cl][Cl] was designed and synthesized. In the presence of a catalyst (0.1 mol %) and Cs2CO3 (6 mol %), the highest yield of updated n-butanol is up to 37% with 80% selectivity. NH units in the ligand are crucially important for the catalytic activity of the iridium complex.

Cooperative Fe/Co-Catalyzed Remote Desaturation for the Synthesis of Unsaturated Amide Derivatives

Unsaturated amides represent common functional groups found in natural products and bioactive molecules and serve as versatile synthetic building blocks. Here, we report an iron(II)/cobalt(II) dual catalytic system for the syntheses of distally unsaturated amide derivatives. The transformation proceeds through an iron nitrenoid-mediated 1,5-hydrogen atom transfer (1,5-HAT) mechanism. Subsequently, the radical intermediate undergoes hydrogen atom abstraction from vicinal methylene by a cobaloxime catalyst, efficiently yielding β,γ- or γ,δ-unsaturated amide derivatives under mild conditions. The efficiency of Co-mediated HAT can be tuned by varying different auxiliaries, highlighting the generality of this protocol. Remarkably, this desaturation protocol is also amenable to practical scalability, enabling the synthesis of unsaturated carbamates and ureas, which can be readily converted into various valuable molecules.

Ir(tri-N-heterocyclic carbene)-catalyzed upgrading of glycerol: C-C bond formation for the synthesis of α-hydroxy acids

Ir(triNHC) complexes catalyzed glycerol and alcohol dehydrogenative coupling, yielding diverse α-hydroxy acids. Unlike conventional conditions, Ir(triNHC) facilitated additional C-C bond formation after lactic acid production from glycerol, exhibiting high TOFs. This protocol successfully converted 1,2-propanediol and sorbitol into α-hydroxy acids, highlighting biomass-derived sources' potential as valuable platform chemicals.

Recent Advances in Reversible Liquid Organic Hydrogen Carrier Systems: From Hydrogen Carriers to Catalysts

Liquid organic hydrogen carriers (LOHCs) have gained significant attention for large-scale hydrogen storage due to their remarkable gravimetric hydrogen storage capacity (HSC) and compatibility with existing oil and gas transportation networks for long-distance transport. However, the practical application of reversible LOHC systems has been constrained by the intrinsic thermodynamic properties of hydrogen carriers and the performances of associated catalysts in the (de)hydrogenation cycles. To overcome these challenges, thermodynamically favored carriers, high-performance catalysts, and catalytic procedures need to be developed. Here, significant advances in recent years have been summarized, primarily centered on regular LOHC systems catalyzed by homogeneous and heterogeneous catalysts, including dehydrogenative aromatization of cycloalkanes to arenes and N-heterocyclics to N-heteroarenes, as well as reverse hydrogenation processes. Furthermore, with the development of metal complexes for dehydrogenative coupling, a new family of reversible LOHC systems based on alcohols is described that can release H2 under relatively mild conditions. Finally, views on the next steps and challenges in the field of LOHC technology are provided, emphasizing new resources for low-cost hydrogen carriers, high-performance catalysts, catalytic technologies, and application scenarios.

Ligand-Controlled Regiodivergent Nickel-Catalyzed Hydroaminoalkylation of Unactivated Alkenes

Ligand modulation of transition-metal catalysts to achieve optimal reactivity and selectivity in alkene hydrofunctionalization is a fundamental challenge in synthetic organic chemistry. Hydroaminoalkylation, an atom-economical approach for alkylating amines using alkenes, is particularly significant for amine synthesis in the pharmaceutical, agrochemical, and fine chemical industries. However, the existing methods usually require specific substrate combinations to achieve precise regio- and stereoselectivity, which limits their practical utility. Protocols allowing for regiodivergent hydroaminoalkylation from the same starting materials, controlling both regiochemical and stereochemical outcomes, are currently absent. Herein, we report a ligand-controlled, regiodivergent nickel-catalyzed hydroaminoalkylation of unactivated alkenes with N-sulfonyl amines. The reaction initiates with amine dehydrogenation and involves aza-nickelacycle intermediates. Tritert-butylphosphine promotes branched regioselectivity and syn diastereoselectivity, whereas ethyldiphenylphosphine enables linear selectivity, yielding regioisomers with inverse orientation. Systematic evaluation of diverse monodentate phosphine ligands reveals distinct regioselectivity cliffs, and % Vbur (min), a ligand steric descriptor, was established as a predictive parameter correlating ligand structure to regioselectivity. Computational investigations supported experimental findings, offering mechanistic insights into the origins of regioselectivity. Our method provides an efficient and predictable route for amine synthesis, demonstrating broad substrate scope, excellent tolerance toward various functional groups, and practical advantages. These include the use of readily available starting materials and cost-effective nickel(II) salts as precatalysts.

Half-sandwich ruthenium complexes with acylhydrazone ligands: synthesis and catalytic activity in the N-alkylation of hydrazides

Novel half-sandwich ruthenium complexes termed [(p-cymene)RuClL] were synthesized by chelating arylhydrazone ligands with [(p-cymene)RuCl2]2 and were then fully characterized using different spectroscopic and analytical techniques. The crystal structure of complex 4 indicated that the hydrazone ligands bonded to the ruthenium ion in a bidentate manner through the imine nitrogen and imidazolate oxygen, exhibiting a pseudo-octahedral geometry centered by the ruthenium atom. The as-fabricated air and moisture stable half-sandwich ruthenium complexes demonstrated excellent catalytic activity towards the N-alkylation of hydrazides under mild conditions. Under the catalysis of ruthenium complexes, acyl hydrazides were reacted with different types of alcohols in a one-pot reaction, resulting in N-alkylation hydrazides with different substituents. This catalyst exhibited characteristics such as high catalytic efficiency, broad substrate scope, and mild reaction conditions, indicating that it has great potential for industrial applications.

Air-Stable Coordinatively Unsaturated Ruthenium(II) Complex for Ligand Binding and Catalytic Transfer Hydrogenation of Ketones from Ethanol

Coordinatively unsaturated complexes are interesting from a fundamental level for their formally empty coordination site and, in particular, from a catalytic perspective as they provide opportunities for substrate binding and transformation. Here, we describe the synthesis of a novel underligated ruthenium complex [Ru(cym)(N,N')]+, 3, featuring an amide-functionalized pyridylidene amide (PYA) as the N,N'-bidentate coordinating ligand. In contrast to previously investigated underligated complexes, complex 3 offers potential for dynamic modifications, thanks to the flexible donor properties of the PYA ligand. Specifically, they allow both for stabilizing the formally underligated metal center in complex 3 through nitrogen π-donation and for facilitating through π-acidic bonding properties the coordination of a further ligand L to the ruthenium center to yield the formal 18 e- complexes [Ru(cym)(N,N')(L)]+ (4: L = P(OMe)3; 5: L = PPh3; 6: L = N-methylimidazole; 7: L = pyridine) and neutral complex [RuCl(cym)(N,N')] 8. Analysis by 1H NMR and UV-vis spectroscopies reveals an increasing Ru-L bond strength along the sequence pyridine <1-methylimidazole < PPh3 < P(OMe)3 with binding constants varying over 3 orders of magnitude with log(Keq) values between 2.8 and 5.7. The flexibility of the Ru(PYA) unit and the ensuing accessibility of saturated and unsaturated species with one and the same ligand are attractive from a fundamental point of view and also for catalytic applications, as catalytic transformations rely on the availability of transiently vacant coordination sites. Thus, while complex 3 does not form stable adducts with O-donors such as ketones or alcohols, it transiently binds these species, as evidenced by the considerable catalytic activity in the transfer hydrogenation of ketones. Notably, and as one of only a few catalysts, complex 3 is compatible with EtOH as a hydrogen source. Complex 3 shows excellent performance in the transfer hydrogenation of pyridyl-containing substrates, in agreement with the poor coordination strength of this functional group to the ruthenium center in 3.

NNN manganese complex-catalyzed α-alkylation of methyl ketones using alcohols: an experimental and computational study

We present here a phosphine-free, quinoline-based pincer Mn catalyst for α-alkylation of methyl ketones using primary alcohols as alkyl surrogates. The C-C bond formation reaction proceeds via a hydrogen auto-transfer methodology. The sole by-product formed is water, rendering the protocol atom efficient. Electronic structure theory studies corroborated the proposed mechanism.

A Ru-catalyzed desulfonylative C-arylation of O-tosyl-hydroxamates

Benzylic amine derivatives are ubiquitous structural motifs in organic chemistry. Herein we report a direct synthesis of these compounds via a direct desulfonylative C-arylation of O-tosyl hydroxamates. The applicability of this Ru-catalyzed aminoalkylation is being exemplified by a set of late-stage functionalizations of natural products.

Designing Cobalt(II) Complexes for Tandem Dehydrogenative Synthesis of Quinoline and Quinazoline Derivatives

In this work, we have constructed three new Co(II) complexes in which steric features govern their structural geometry. The metal ligand-cooperation behavior of the alkoxy arm is utilized to explore the catalytic activities of these complexes with respect to dehydrogenation. A wide range of C-3-substituted quinoline and quinazoline derivatives were synthesized in high yields. The developed protocol's usefulness is enhanced by the chemoselective transformation of different fatty alcohols to synthesize heterocycles having distal unsaturation. Various kinetic, mechanistic, and control studies were conducted to comprehend the reaction route.

K2S2O8 promoted metal-free direct C-alkylation of acetophenones with alcohols

Herein, we report a metal-free synthetic methodology for the C-alkylation of acetophenones following a hydrogen borrowing-like pathway using the commercially available inorganic oxidant K2S2O8 in conjunction with KOtBu. This study articulates the potential of K2S2O8 in fast initiation of the oxidation of benzyl alcohols to develop an atom-economical, easy, and more efficient methodology for the C-alkylation of various acetophenones and synthesis of a variety of substituted quinolines. Experimental data from control experiments, literature and characterization of intermediates through spectroscopic techniques support the proposed plausible mechanism.

The Development of Aldehyde Catalytic System

Aldehyde catalysts have proven to be highly effective in facilitating and accelerating a wide range of challenging transformations in organic chemistry. This article is structured into three main sections, focusing on the utilization of aldehydes as organocatalysts, the aldehydes/transition metals catalytic systems, and photochemical initiators. Finally, we provide a concise summary of the advancements in this fascinating research field, offering our perspectives and insights.

Electron transfer catalysis mediated by 3d complexes of redox non-innocent ligands possessing an azo function: a perspective

It was first reported almost two decades ago that ligands with azo functions are capable of accepting electron(s) upon coordination to produce azo-anion radical complexes, thereby exhibiting redox non-innocence. Over the past two decades, there have been numerous reports of such complexes along with their structures and diverse characteristics. The ability of a coordinated azo function to accept one or more electron(s), thereby acting as an electron reservoir, is currently employed to carry out electron transfer catalysis since they can undergo redox transformation at mild potentials due to the presence of energetically accessible energy levels. The cooperative involvement of redox non-innocent ligand(s) containing an azo group and the coordinated metal centre can adjust and modulate the Lewis acidity of the latter through selective ligand-centred redox events, thereby manipulating the capacity of the metal centre to bind to the substrate. We have summarized the list of first row transition metal complexes of iron, cobalt, nickel, copper and zinc with redox non-innocent ligands incorporating an azo function that have been exploited as electron transfer catalysts to effectuate sustainable synthesis of a wide variety of useful chemicals. These include ketazines, pyrimidines, benzothiazole, benzoxazoles, N-acyl hydrazones, quinazoline-4(3)H-ones, C-3 alkylated indoles, N-alkylated anilines and N-alkylated heteroamines. The reaction pathways, as demonstrated by catalytic loops, reveal that the azo function of a coordinated ligand can act as an electron sink in the initial steps to bring about alcohol oxidation and thereafter, they serve as an electron pool to produce the final products either via HAT or PCET processes.

Oxidative Dehydrogenation of Alkanes through Homogeneous Base Metal Catalysis

Preparing valuable olefins from cheap and abundant alkane resources has long been a challenging task in organic synthesis, which mainly suffers from harsh reaction conditions and narrow scopes. Homogeneous transition metals catalyzed dehydrogenation of alkanes has attracted much attention for its excellent catalytic activities under relatively milder conditions. Among them, base metal catalyzed oxidative alkane dehydrogenation has emerged as a viable strategy for olefin synthesis for its usage of cheap catalysts, compatibility with various functional groups, and low reaction temperature. In this review, we discuss recent development of base metal catalyzed alkane dehydrogenation under oxidative conditions and their application in constructing complex molecules.

Mechanistic insights into excited-state palladium catalysis for C-S bond formations and dehydrogenative sulfonylation of amines

Photocatalytic selective C(sp3)-H activation/cross-coupling reactions are appealing in organic synthesis. In this manuscript, we describe the development of photoexcited-state Pd-catalyzed dehydrogenative β-sulfonylation reactions using amines and aryl sulfonyl chlorides via intermolecular hydrogen atom transfer and C-S cross-coupling processes at room temperature. The transformation can be achieved by the direct generation of two distinct Pd-radical hybrid species and their capability to promote two different reactivities from Pd(0) and aryl sulfonyl chlorides, allowing for the efficient conversion of readily available amines into stable sulfonyl-substituted enamines at room temperature. The in-depth experimental, computational, and transient optical spectroscopic study and catalytic applications of a dehydrogenative functionalization event provide evidence for both static and dynamic quenching, as well as inner-sphere and outer-sphere mechanisms.

Photochemical Desaturation and Epoxidation with Oxygen by Sequential Flavin Catalysis

Catalytic desaturations are important strategies for the functionalization of organic molecules. In nature, flavoenzymes mediate the formation of α,β-unsaturated carbonyl compounds by concomitant cofactor reduction. Contrary to many laboratory methods for these reactions, such as the Saegusa-Ito oxidation, no transition metal reagents or catalysts are required. However, a molecular flavin-mediated variant has not been reported so far. We disclose a photochemical approach for silyl enol ether oxidation, which leads to α,β-unsaturated ketones (13 examples) in very good yields. The flavin catalysts are stable throughout the desaturation reaction, and we successfully applied them in a subsequent aerobic epoxidation by simply changing the reaction conditions. This protocol allowed us to directly convert silyl enol ethers into α,β-epoxyketones in a one-pot fashion (12 examples). Sequential flavin catalysis is not limited to one specific reactivity combination and can, inter alia, couple the photochemical oxidation with radical additions. We anticipate that flavin-catalyzed desaturation will be applicable to other substrate classes and that its sequential catalytic activity will enable rapid substrate diversification.

meta-Selective C-H Functionalization of Pyridines

The pyridine moiety is an important core structure for a variety of drugs, agrochemicals, catalysts, and functional materials. Direct functionalization of C-H bonds in pyridines is a straightforward approach to access valuable substituted pyridines. Compared to the direct ortho- and para-functionalization, meta-selective pyridine C-H functionalization is far more challenging due to the inherent electronic properties of the pyridine entity. This review summarizes currently available methods for pyridine meta-C-H functionalization using a directing group, non-directed metalation, and temporary dearomatization strategies. Recent advances in ligand control and temporary dearomatization are highlighted. We analyze the advantages as well as limitations of current techniques and hope to inspire further developments in this important area.

An Asymmetric Hydrogenation/N-Alkylation Sequence for a Step-Economical Route to Indolizidines and Quinolizidines

The direct catalytic asymmetric hydrogenation of pyridines for the synthesis of piperidines remains a challenge. Herein, we report a one-pot asymmetric hydrogenation of pyridines with subsequent N-alkylation using a traceless Brønsted acid activation strategy. Catalyzed by an iridium-BINAP complex, the substrates undergo ketone reduction, cyclization and pyridine hydrogenation in sequence to form indolizidines and quinolizidines. The absolute configuration of the stereocenter of the alcohol is retained and influences the formation of the second stereocenter. Experimental and theoretical mechanistic studies reveal that the chloride anion and certain noncovalent interactions govern the stereoselectivity of the cascade reaction throughout the catalytic process.

Photo-induced 1,2-thiohydroxylation of maleimide involving disulfide and singlet oxygen

A visible light-driven di-functionalization of maleimide with disulfide and in situ-generated singlet oxygen offers selective 1,2-thiohydroxylation under additive-free conditions. Here the disulfide plays the dual role of photosensitizer and the coupling reagent. Notably, the hydroxyl functionality originates from the in situ generated singlet oxygen followed by HAT from H2O (moisture).

Aminodealkenylation: Ozonolysis and copper catalysis convert C(sp3)-C(sp2) bonds to C(sp3)-N bonds

Great efforts have been directed toward alkene π bond amination. In contrast, analogous functionalization of the adjacent C(sp3)-C(sp2) σ bonds is much rarer. Here we report how ozonolysis and copper catalysis under mild reaction conditions enable alkene C(sp3)-C(sp2) σ bond-rupturing cross-coupling reactions for the construction of new C(sp3)-N bonds. We have used this unconventional transformation for late-stage modification of hormones, pharmaceutical reagents, peptides, and nucleosides. Furthermore, we have coupled abundantly available terpenes and terpenoids with nitrogen nucleophiles to access artificial terpenoid alkaloids and complex chiral amines. In addition, we applied a commodity chemical, α-methylstyrene, as a methylation reagent to prepare methylated nucleosides directly from canonical nucleosides in one synthetic step. Our mechanistic investigation implicates an unusual copper ion pair cooperative process.

Activation of Ethanol via Conjunction of a Photocatalyst and a HAT Reagent for the Synthesis of Benzimidazoles

The transformation of ethanol to value-added chemicals has tremendous potential. However, generally, harsh reaction conditions are needed for the functionalization of ethanol due to its high dehydrogenation energy. Herein, a metal-free photo-mediated activation of challenging ethanol and higher aliphatic alcohols for the synthesis of differently functionalized benzimidazoles under mild conditions is disclosed. The interplay of a photocatalyst and a HAT reagent facilitated the activation of aliphatic alcohols. A wide array of diamines with different functional groups were well tolerated, and the protocol was also extended to N-substituted diamines for the synthesis of industrially important benzimidazoles. A probable catalytic cycle was proposed based on various mechanistic studies.

Enantioconvergent transformations of secondary alcohols through borrowing hydrogen catalysis

Direct substitution of readily available alcohols is recognized as a key research area in green chemical synthesis. Starting from simple racemic secondary alcohols, the achievement of catalytic enantioconvergent transformations of the substrates will be highly desirable for efficient access to valuable enantiopure compounds. To accomplish such attractive yet challenging transformations, the strategy of the enantioconvergent borrowing hydrogen methodology has proven to be uniquely effective and versatile. This review aims to provide an overview of the impressive progress made on this topic of research that has only thrived in the past decade. In particular, the conversion of racemic secondary alcohols to enantioenriched chiral amines, N-heterocycles, higher-order alcohols and ketones will be discussed in detail.

Ammonolytic transfer dehydrogenation of amines and amides: a versatile method to valorize nitrogen compounds to nitriles

The dehydrogenation of amines has been identified as an efficient method for nitrile synthesis. At present, this approach is restricted to (oxidative) dehydrogenations of primary amines, most often with specialized homogeneous catalysts. In this work, amines were transfer dehydrogenated to nitriles using simple and cheap alkenes (e.g. ethylene or propene) as hydrogen scavengers. The scope was expanded to secondary amines, tertiary amines and even aldehydes. Additional nitrogen is built in from NH3. The versatility of the process was proven by coupling it to the ammonolysis of secondary amides. This enabled us to recycle long-chain polyamides (LCPA) into monomeric compounds, i.e. α,ω-amidonitriles and dinitriles. Reactions were performed with a recyclable heterogeneous Pt catalyst, at 200 °C and with limited addition of NH3 and ethylene. High yields of up to 94% were obtained for the corresponding nitriles.

Vibrational Spectroscopy and Structural Analysis of V+(C2H6)n Clusters (n = 1-4)

The vibrational structure and binding motifs of vanadium cation-ethane clusters, V⁺(C₂H₆)_n, for n = 1-4 are probed using infrared photodissociation spectroscopy in the C-H stretching region (2550-3100 cm^-1). Comparison of spectra to scaled harmonic frequency spectra obtained using density functional theory suggests that ethane exhibits two primary binding motifs when interacting with the vanadium cation: an end-on η² configuration and a side-on configuration. Determining the denticity of the side on isomer is complicated by the rotational motion of ethane, implying that structural analysis based solely on Born-Oppenheimer potential energy surface minimizations is insufficient and that a more sophisticated vibrationally adiabatic approach is necessary to interpret spectra. The lower-energy side-on configuration predominates in smaller clusters, but the end-on configuration becomes important for larger clusters as it helps to maintain a roughly square-planar geometry about the central vanadium. Proximate C-H bonds exhibit elongation and large red-shifts when compared to bare ethane, particularly in the case of the side-on isomer, demonstrating initial effects of C-H bond activation, which are underestimated by scaled harmonic frequency calculations. Tagging several of the clusters with argon and nitrogen results in nontrivial effects. The high binding energy of N₂ can lead to the displacement of ethane from a side-on configuration into an end-on configuration. The presence of either one or two Ar or N₂ can impact the overall symmetry of the cluster, which can alter the potential energy surface for ethane rotation in the side-on isomer and may affect the accessibility of low-lying electronic excited states of V⁺.

Iridium-, Ruthenium-, and Nickel-Catalyzed C-C Couplings of Methanol, Formaldehyde, and Ethanol with π-Unsaturated Pronucleophiles via Hydrogen Transfer

In this Perspective, the use of methanol and ethanol as C1 and C2 feedstocks in metal-catalyzed C-C couplings to π-unsaturated pronucleophiles via hydrogen auto-transfer is surveyed. In these processes, alcohol oxidation to form an aldehyde electrophile is balanced by reduction of an π-unsaturated hydrocarbon to form a transient organometallic nucleophile. Mechanistically related reductive couplings of paraformaldehyde mediated by alcohol reductants or formic acid also are described. These processes encompass the first catalytic enantioselective C-C couplings of methanol and ethanol and, more broadly, illustrate how the native reducing ability of alcohols enable the departure from premetalated reagents in carbonyl addition.

N-Alkylation of Amines by C1-C10 Aliphatic Alcohols Using A Well-Defined Ru(II)-Catalyst. A Metal-Ligand Cooperative Approach

A Ru(II)-catalyzed efficient and selective N-alkylation of amines by C1-C10 aliphatic alcohols is reported. The catalyst [Ru(L^1a)(PPh₃)Cl₂] (1a) bearing a tridentate redox-active azo-aromatic pincer, 2-((4-chlorophenyl)diazenyl)-1,10-phenanthroline (L^1a) is air-stable, easy to prepare, and showed wide functional group tolerance requiring only 1.0 mol % (for N-methylation and N-ethylation) and 0.1 mol % of catalyst loading for N-alkylation with C3-C10 alcohols. A wide array of N-methylated, N-ethylated, and N-alkylated amines were prepared in moderate to good yields via direct coupling of amines and alcohols. 1a efficiently catalyzes the N-alkylation of diamines selectively. It is even suitable for synthesizing N-alkylated diamines using (aliphatic) diols producing the tumor-active drug molecule MSX-122 in moderate yield. 1a showed excellent chemo-selectivity during the N-alkylation using oleyl alcohol and monoterpenoid β-citronellol. Control experiments and mechanistic investigations revealed that the 1a-catalyzed N-alkylation reactions proceed via a borrowing hydrogen transfer pathway where the hydrogen removed from the alcohol during the dehydrogenation step is stored in the ligand backbone of 1a, which in the subsequent steps transferred to the in situ formed imine intermediate to produce the N-alkylated amines.

Hydrogen-free palladium-catalyzed intramolecular anti-Markovnikov hydroaminocarbonylation of 2-(1-methylvinyl)anilines

The palladium-catalyzed intramolecular hydroaminocarbonylation of 2-(1-methylvinyl)aniline derivatives has been achieved using dppp (1,3-bis(diphenylphosphino)propane) as a ligand under hydrogen-free conditions. The reaction involves the generation of an active palladium hydride species with a catalytic amount of TsOH. This amide bond formation reaction was applied to the synthesis of various 4-substituted 3,4-dihydroquinolone derivatives with both high yield and regioselectivity.

Copper-Catalyzed Aza-Benzyl Transfer Michael Addition via C-C Bond Cleavage

A non-noble Cu-catalyzed transfer aza-benzyl Michael addition via the C-C bond cleavage of aza-benzyl alcohols has been disclosed. The unstrained C(sp³)-C(sp³) bond of an alcohol was selectively cleaved. This aza-benzyl transfer strategy provides a selective and environmentally benign approach for the C-alkylation of α,β-unsaturated carbonyl compounds that employs readily available alcohols as carbon nucleophiles and is characterized by a wide range of substrates and good to excellent yields.

Visible-light-induced dehydrogenative amidation of aldehydes enabled by iron salts

A direct dehydrogenative amidation reaction of aldehydes and amines under a visible light mediated ligand-to-metal charge transfer (LMCT) process was described. In this protocol, aldehyde substrates were activated by photoinduced hydrogen atom abstraction (HAA), generating acyl chloride intermediates followed by nucleophilic addition of amines. The synthetic method furnishes good functional group tolerance and broad substrate scope toward both aliphatic and aromatic components.