Metal Oxide Surfaces and Their Interactions with Aqueous Solutions and Microbial Organisms

Managing Expectations and Imbalanced Training Data in Reactive Force Field Development: An Application to Water Adsorption on Alumina

ReaxFF is a computationally efficient model for reactive molecular dynamics simulations that has been applied to a wide variety of chemical systems. When ReaxFF parameters are not yet available for a chemistry of interest, they must be (re)optimized, for which one defines a set of training data that the new ReaxFF parameters should reproduce. ReaxFF training sets typically contain diverse properties with different units, some of which are more abundant (by orders of magnitude) than others. To find the best parameters, one conventionally minimizes a weighted sum of squared errors over all of the data in the training set. One of the challenges in such numerical optimizations is to assign weights so that the optimized parameters represent a good compromise among all the requirements defined in the training set. This work introduces a new loss function, called Balanced Loss, and a workflow that replaces weight assignment with a more manageable procedure. The training data are divided into categories with corresponding "tolerances", i.e., acceptable root-mean-square errors for the categories, which define the expectations for the optimized ReaxFF parameters. Through the Log-Sum-Exp form of Balanced Loss, the parameter optimization is also a validation of one's expectations, providing meaningful feedback that can be used to reconfigure the tolerances if needed. The new methodology is demonstrated with a nontrivial parametrization of ReaxFF for water adsorption on alumina. This results in a new force field that reproduces both the rare and frequent properties of a validation set not used for training. We also demonstrate the robustness of the new force field with a molecular dynamics simulation of water desorption from a γ-Al2O3 slab model.

First principles simulations of MgO(100) surface hydration at ambient conditions

Developing a better understanding of water ordering and hydroxylation at oxide mineral surfaces is important across a breath of application spaces. Recent vibrational sum frequency generation (vSFG) measurements on MgO(100) surfaces at ambient conditions showed that water dissociates and hydroxylates the surface yielding a non-hydrogen bonded hydroxyl species. Starting from previously determined water hydroxylation patterns on MgO(100), we performed ab initio thermodynamic calculations and vibrational analysis to compare with the vSFG observations. At ambient conditions (i.e., T = 298.15 K and pH2O = 32 mbar), the most thermodynamically favorable surface hydroxylation is found to be p(3 × 2) - 8H2O, involving a dissociation of 25% of the adsorbed water. Analysis of the vibrational density of states for this hydroxylation configuration yielded three different hydrogen bonding environments with the frequency of the peaks in very good agreement with the vSFG measurements. However, the non-H-bonded spectral feature on this surface is predicted to be similar to that expected for Mg(OH)2, a thermodynamically downhill alteration of the surface that must be independently ruled out before one can be fully confident in the apparent theory/vSFG agreement. Our study provides more insights into the ordering and structure of water monolayer at MgO(100) surface at ambient conditions and completes previous theoretical and experimental analysis performed at low temperature and ultra-high vacuum conditions.

Integrated pH Sensors Based on RuO2/GO Nanocomposites Fabricated Using the Aerosol Jet Printing Method

An aerosol jet printing (AJP) process for depositing ruthenium dioxide (RuO2) as a promising material for pH sensing is reported. Graphene oxide (GO) with a large surface area was used for the in situ sol-gel deposition of RuO2 nanoparticles on its surface. The cosolvent ratio and solid loading of the solution are adjusted to form a printable and stable ink. The monodispersed aerosol was atomized on the surface of the screen-printed carbon electrode in order to develop an integrated pH sensor. The RuO2-GO pH sensor demonstrates excellent performance, with a rapid response time of less than 5 s and high sensitivity in the pH range of 4-10. Compared to traditional carbon electrodes, the RuO2-GO sensor shows up to four times higher sensitivity. The increased sensitivity is a result of the consistent attachment of small-crystallized RuO2 nanoparticles onto the surface of GO sheets, leading to a synergistic effect. Thanks to the AJP method as a facile and cost-effective integration technique, the fabricated electrodes can serve as an alternative to traditional rigid pH electrodes for accurate pH measurement.

Mapping Capillary Infiltration-Induced Potential in Water-Triggered Electric Generator Using an Electrical Probe Integrated Microscope

Power generation from water-triggered capillary action in porous structures has recently geared extensive attention, offering the potential for generating electricity from ubiquitous water evaporation. However, conclusively establishing the nature of electrical generation and charge transfer is extremely challenging arising from the complicated aqueous solid-liquid interfacial phenomenon. Here, an electric probe-integrated microscope is developed to on-line monitor the correlation between water capillary action and potential values at any desired position of an active layer. With a probe spatial resolution reaching up to fifty micrometers, the internal factors prevailing over the potential distribution across the whole wet and dry regions are comprehensively identified. Further, the self-powered sensing capabilities of this integrated system are also demonstrated, including real-time monitoring of wind speed, environmental humidity, ionic strength, and inclination angle of generators. The combination of electric potential and chemical color indicator suggests that charge generation is likely correlated with ion-selective transport in the nanoporous channel during the water infiltration process. And unipolar ions (for instance protons) should be the dominant charge-transfer species. The work reveals the fundamental principles regulating charge generation/transfer during the water-triggered electric generation process.

A structure-activity approach towards the toxicity assessment of multicomponent metal oxide nanomaterials

The increase of human and environmental exposure to engineered nanomaterials (ENMs) due to the emergence of nanotechnology has raised concerns over their safety. The challenging nature of in vivo and in vitro toxicity assessment methods for ENMs, has led to emerging in silico techniques for ENM toxicity assessment, such as structure-activity relationship (SAR) models. Although such approaches have been extensively developed for the case of single-component nanomaterials, the case of multicomponent nanomaterials (MCNMs) has not been thoroughly addressed. In this paper, we present a SAR approach for the case metal and metal oxide MCNMs. The developed SAR framework is built using a dataset of 796 individual toxicity measurements for 340 different MCNMs, towards human cells, mammalian cells, and bacteria. The novelty of the approach lies in the multicomponent nature of the nanomaterials, as well as the size, diversity and heterogeneous nature of the dataset used. Furthermore, the approach used to calculate descriptors for surface loaded MCNMs, and the mechanistic insight provided by the model results can assist the understanding of MCNM toxicity. The developed models are able to correctly predict the toxic class of the MCNMs in the heterogeneous dataset, towards a wide range of human cells, mammalian cells and bacteria. Using the abovementioned approach, the principal toxicity pathways and mechanisms are identified, allowing a more holistic understanding of metal oxide MCNM toxicity.

Vibrational spectroscopy as a probe of heterogeneities within geochemical thin films on macro, micro, and nanoscales

Minerals play a critical role in the chemistry occurring along the interface of different environmental systems, including the atmosphere/geosphere and hydrosphere/geosphere. In the past few decades, vibrational spectroscopy has been used as a probe for studying interfacial geochemistry. Here, we compare four different vibrational methods for probing physical and chemical features across different mineral samples and length scales, from the macroscale to nanoscale. These methods include Attenuated Total Reflection - Fourier Transform Infrared (ATR-FTIR), Optical Photothermal Infrared (O-PTIR), Atomic Force Microscopy-Infrared (AFM-IR) and micro-Raman spectroscopy. The emergence of these micro-spectroscopic probes has offered new insights into heterogeneities within geochemical thin films and particles. These developments represent an important step forward for analyzing environmental interfaces and thin films as often these are assumed to be physically and chemically homogeneous. By comparing and integrating data across these measurement techniques, new insights into sample differences and heterogeneities can be gained. For example, interrogation of the various mineral samples at smaller length scales is shown to be particularly informative in highlighting unique chemical environments, including for chemically complex, multicomponent samples such as Arizona Test Dust (AZTD), as well as differences due to crystal orientation.

Highly efficient adsorption of antibiotic ciprofloxacin hydrochloride from aqueous solution by diatomite-basic zinc chloride composites

The antibiotic ciprofloxacin (CIP) is used to treat a variety of bacterial infections, yet it poses significant health risks to aquatic environments. While adsorption is a promising technique for CIP removal, current adsorption capacities remain limited. In this study, we introduce a diatomite and basic zinc chloride composite (ZnHC-Dt) prepared using a straightforward deposition method, with the ability to achieve highly efficient ciprofloxacin removal. ZnHC-Dt is characterized using field emission scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and the Brunauer-Emmett-Teller method (BET). We also assess the zeta potential. The optimized ZnHC-Dt adsorbent, achieved at a mass ratio of 0.45 with ZnHC/(ZnHC+Dt), is adopted with a CIP adsorption capacity of 831.96 mg/g at 25 °C, broad pH adaptability (within 3.0-10.0), rapid adsorption rate (reaching equilibrium in 4 h), and stable performance under Na+ ionic strength. The CIP adsorption process follows pseudo-second-order kinetics and aligns well with the Langmuir adsorption model. The high adsorption capacity of ZnHC-Dt can be attributed to electrostatic attraction, hydrogen bonding, surface complexation, and available adsorption sites. During the desorption process, the CIP removal rate retains 65.33% effectiveness after five cycles. The results suggest that ZnHC-Dt holds significant potential for CIP removal in aqueous solutions.

Computational Investigations of the Water Structure at the α-Al2O3(0001)-Water Interface

The α-Al2O3(0001)-water interface is investigated using ab initio molecular dynamics (AIMD) simulations. The spectral signatures of the vibrational sum frequency generation (vSFG) spectra of OH stretching mode for water molecules at the interface are related to the interfacial water orientation, hydrogen bond network, and water dissociation process at different water/alumina interfaces. Significant differences are found between alumina surfaces at different hydroxylation levels, namely, Al-terminated and O-terminated α-Al2O3(0001). By calculating the vibrational sum frequency generation spectrum and its imaginary component from AIMD results, the structure of interfacial waters as well as the termination of alumina slab are related to the spectral signatures of vSFG data.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Chemical Transformations of 2D Kaolinic Clay Mineral Surfaces from Sulfuric Acid Exposure

A combined experimental and computational approach is used to investigate the chemical transformations of kaolinite and metakaolin surfaces when exposed to sulfuric acid. These clay minerals are hydrated ternary metal oxides and are shown to be susceptible to degradation by loss of Al as the water-soluble salt Al₂(SO₄)₃, due to interactions between H₂SO₄ and aluminum cations. This degradation process results in a silica-rich interfacial layer on the surfaces of the aluminosilicates, most prominently observed in metakaolin exposed to pH environments of less than 4. Our observations are supported by XPS, ATR-FTIR, and XRD experiments. Concurrently, DFT methodologies are used to probe the interactions between the clay mineral surfaces and H₂SO₄ as well as other sulfur-containing adsorbates. An analysis performed using a DFT + thermodynamics model shows that the surface transformation processes that lead to the loss of Al and SO₄ from metakaolin are favorable at pH below 4; however, such transformations are not favorable for kaolinite, a result that agrees with our experimental efforts. The data obtained from both experimental techniques and computational studies support that the dehydrated surface of metakaolin interacts more strongly with sulfuric acid and provide atomistic insight into the acid-induced transformations of these mineral surfaces.

Origin of hydroxyl pair formation on reduced anatase TiO2(101)

The interaction of water with metal oxide surfaces is of key importance to several research fields and applications. Because of its ability to photo-catalyze water splitting, reducible anatase TiO₂ (a-TiO₂) is of particular interest. Here, we combine experiments and theory to study the dissociation of water on bulk-reduced a-TiO₂(101). Following large water exposures at room temperature, point-like protrusions appear on the a-TiO₂(101) surface, as shown by scanning tunneling microscopy (STM). These protrusions originate from hydroxyl pairs, consisting of terminal and bridging OH groups, OH_t/OH_b, as revealed by infrared reflection absorption spectroscopy (IRRAS) and valence band experiments. Utilizing density functional theory (DFT) calculations, we offer a comprehensive model of the water/a-TiO₂(101) interaction. This model also explains why the hydroxyl pairs are thermally stable up to ∼480 K.

Distance-dependent dielectric constant at the calcite/electrolyte interface: Implication for surface complexation modeling

HYPOTHESIS

The electrical double layer formed at the mineral/electrolyte interface is often modeled using mean-field approaches based on a continuum description of the solvent whose dielectric constant is assumed to decrease monotonically with decreasing distance to the surface. In contrast, molecular simulations show that the solvent polarizability oscillates near the surface similar to the water density profile - as shown previously, for example, by Bonthuis et al. (D.J. Bonthuis, S. Gekle, R.R. Netz, Dielectric Profile of Interfacial Water and its Effect on Double-Layer Capacitance, Phys Rev Lett 107(16) (2011) 166102). We showed that molecular and mesoscale pictures agree by spatially averaging the dielectric constant obtained from molecular dynamics simulations over the distances relevant to the mean-field representation. In addition, the values of capacitances used to describe the electrical double layer in Surface Complexation Models (SCMs) of the mineral/electrolyte interface can be estimated using molecularly informed spatially averaged dielectric constants and positions of hydration layers.

EXPERIMENTS

First, we used molecular dynamics simulations to model the calcite 101¯4/electrolyte interface. Next, by using atomistic trajectories, we calculated the distance-dependent static dielectric constant and water density in the direction normal to the. Finally, we applied spatial compartmentalization consistent with the model of parallel-plate capacitors connected in series to estimate SCM capacitances.

FINDINGS

Computationally expensive simulations are required to determine the dielectric constant profile of interfacial water near the mineral surface. On the other hand, water density profiles are readily assessable from much shorter simulation trajectories. Our simulations confirmed that dielectric and water density oscillations at the interface are correlated. Here, we parametrized linear regression models to estimate the dielectric constant directly from the local water density. This is a significant computational shortcut compared to slowly converging calculations relying on total dipole moment fluctuations. The amplitude of the interfacial dielectric constant oscillation can exceed the dielectric constant of the bulk water, suggesting an ice-like frozen state, but only if there are no electrolyte ions. The interfacial accumulation of electrolyte ions causes a decrease in the dielectric constant due to the reduction of water density and re-orientation of water dipoles in ion hydration shells. Finally, we show how to use the computed dielectric properties to estimate SCM's capacitances.

Demonstrating the In Vitro and In Situ Antimicrobial Activity of Oxide Mineral Microspheres: An Innovative Technology to Be Incorporated into Porous and Nonporous Materials

The antimicrobial activity of surfaces treated with zinc and/or magnesium mineral oxide microspheres is a patented technology that has been demonstrated in vitro against bacteria and viruses. This study aims to evaluate the efficiency and sustainability of the technology in vitro, under simulation-of-use conditions, and in situ. The tests were undertaken in vitro according to the ISO 22196:2011, ISO 20473:2013, and NF S90-700:2019 standards with adapted parameters. Simulation-of-use tests evaluated the robustness of the activity under worst-case scenarios. The in situ tests were conducted on high-touch surfaces. The in vitro results show efficient antimicrobial activity against referenced strains with a log reduction of >2. The sustainability of this effect was time-dependent and detected at lower temperatures (20 ± 2.5 °C) and humidity (46%) conditions for variable inoculum concentrations and contact times. The simulation of use proved the microsphere's efficiency under harsh mechanical and chemical tests. The in situ studies showed a higher than 90% reduction in CFU/25 cm² per treated surface versus the untreated surfaces, reaching a targeted value of <50 CFU/cm². Mineral oxide microspheres can be incorporated into unlimited surface types, including medical devices, to efficiently and sustainably prevent microbial contamination.

Momentum-dependent sum-frequency vibrational spectroscopy of bonded interface layer at charged water interfaces

Interface-specific hydrogen (H)-bonding network of water directly controls the energy transfer and chemical reaction pathway at many charged aqueous interfaces, yet to characterize these bonded water layer structures remains a challenge. We now develop a sum-frequency spectroscopic scheme with varying photon momenta as an all-optic solution for retrieving the vibrational spectra of the bonded water layer and the ion diffuse layer and, hence, microscopic structural and charging information about an interface. Application of the method to a model surfactant-water interface reveals a hidden weakly donor H-bonded water species, suggesting an asymmetric hydration-shell structure of fully solvated surfactant headgroups. In another application to a zwitterionic phosphatidylcholine lipid monolayer-water interface, we find a highly polarized bonded water layer structure associating to the phosphatidylcholine headgroup, while the diffuse layer contribution is experimentally proven to be negligible. Our all-optic method offers an in situ microscopic probe of electrochemical and biological interfaces and the route toward future imaging and ultrafast dynamics studies.

Analysis of micro- and nanoscale heterogeneities within environmentally relevant thin films containing biological components, oxyanions and minerals using AFM-PTIR spectroscopy

Minerals in groundwater interact with various chemical and biological species including organic matter, proteins, and prevalent oxyanions, resulting in surface coatings and thin films of these different components. Surface interactions and the surface adsorption of these components on both oxide and oxyhydroxide iron surfaces have been widely investigated using a variety of spectroscopic methods. Despite these numerous studies, there still remains uncertainty with respect to interactions between these individual components, as well as heterogeneities and phase segregations within these thin films. In this study, we investigate mixtures containing Fe-containing minerals, proteins, and oxyanions to better understand surface interactions and phase segregation using Atomic Force Microscopy PhotoThermal Infrared (AFM-PTIR) spectroscopy. The results of this study show that AFM-PTIR spectroscopy can identify both nano- and microscale heterogeneities present within these thin films that are difficult to discern with other more conventional techniques such as ATR-FTIR spectroscopy due to phase segregation and mineral surface interactions. Overall, AFM-PTIR spectroscopy provides insights into multi-component environmental films that are difficult to uncover using other methodologies. This method has the potential to differentiate between bound and unbound toxic species as well as biological components, including environmental DNA, which can be used to assess the fate and transport of these species in the environment.

Interplay between Facets and Defects during the Dissociative and Molecular Adsorption of Water on Metal Oxide Surfaces

Surface terminations and defects play a central role in determining how water interacts with metal oxides, thereby setting important properties of the interface that govern reactivity such as the type and distribution of hydroxyl groups. However, the interconnections between facets and defects remain poorly understood. This limits the usefulness of conventional notions such as that hydroxylation is controlled by metal cation exposure at the surface. Here, using hematite (α-Fe₂O₃) as a model system, we show how oxygen vacancies overwhelm surface cation-dependent hydroxylation behavior. Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy was used to monitor the adsorption of molecular water and its dissociation to form hydroxyl groups in situ on (001), (012), or (104) facet-engineered hematite nanoparticles. Supported by density functional theory calculations of the respective surface energies and oxygen vacancy formation energies, the findings show how oxygen vacancies are more prone to form on higher energy facets and induce surface hydroxylation at extremely low relative humidity values of 5 × 10^-5%. When these vacancies are eliminated, the extent of surface hydroxylation across the facets is as expected from the areal density of exposed iron cations at the surface. These findings help answer fundamental questions about the nature of reducible metal oxide-water interfaces in natural and technological settings and lay the groundwork for rational design of improved oxide-based catalysts.

Impact of irrigation water quality on human norovirus surrogate survival during leafy green production

Introduction

The impact of water quality on the survival of human norovirus (NoV) was determined in irrigation water field run-off (tail water) and well water from a representative Central Coast vegetable production site in the Salinas Valley, California.

Methods

Tail water, well water, and ultrapure water samples were inoculated separately with two surrogate viruses for human NoV-Tulane virus (TV) and murine norovirus (MNV)-to achieve a titer of 1×105 plaque forming units (PFU)/ml. Samples were stored at 11, 19, and 24°C for 28 days. Additionally, inoculated water was applied to soil collected from a vegetable production site in the Salinas Valley or to the surface of growing romaine lettuce leaves, and virus infectivity was evaluated for 28 days in a growth chamber.

Results

Virus survival was similar for water stored at 11, 19, and 24°C and there was no difference in infectivity based on water quality. After 28 days, a maximum 1.5 log reduction was observed for both TV and MNV. TV decreased by 1.97-2.26 log and MNV decreased by 1.28- 1.48 logs after 28 days in soil; infectivity was not influenced by water type. Infectious TV and MNV were recovered from lettuce surfaces for up to 7 and 10 days after inoculation, respectively. Across the experiments there was no significant impact of water quality on the stability of the human NoV surrogates.

Discussion

Overall, the human NoV surrogates were highly stable in water with a less than 1.5 log reduction over 28 days and no difference observed based on the water quality. In soil, the titer of TV declined by approximately 2 logs over 28 days, while MNV declined by 1 log during the same time interval, suggesting surrogate-specific inactivation dynamics in the soil tested in this study. A 5-log reduction in MNV (day 10 post inoculation) and TV (day 14 post inoculation) was observed on lettuce leaves, and the inactivation kinetics were not significantly impacted by the quality of water used. These results suggest that human NoV would be highly stable in water, and the quality of the water (e.g., nutrient content, salinity, and turbidity) does not significantly impact viral infectivity.

Fabrication of a waste cotton fabrics-based nanosystem for simultaneous removal of Cu(II) and Pb(II)

Herein, a waste cotton fabrics-based nanosystem was fabricated to simultaneously remove copper (Cu(II)) and lead ions (Pb(II)) from water and soil. Therein, carboxyl-functionalized zinc oxide microsphere (ZnO-COOH) with peanut shape was carried by cotton fabric (CF) to get CF/ZnO-COOH nanosystem. CF/ZnO-COOH with a good foldable property possessed a high removal capacity for Cu(II) and Pb(II) via electrostatic attraction and chelation. The result indicated that their removal efficiencies of CF/ZnO-COOH could reach over 95% after 2 h. The adsorption process was consistent with Langmuir (R² = 0.9905 of Cu(II) and R² = 0.9846 of Pb(II)) and pseudo-second-order kinetic models (R² = 0.9999 of Cu(II) and R² = 0.9999 of Pb(II)). The thermodynamic data showed that the adsorption process was spontaneous and exothermic. Additionally, CF/ZnO-COOH also possessed a high fixation ability for Cu(II) and Pb(II) in sand-soil column, especially for Pb(II) (15 cm, 0.4 μg kg^-1). Therefore, this wok provides an environmentally friendly and efficient way to remove Cu(II) and Pb(II) from water and soil concurrently.

Molecularly Functionalized SnO2 Films by Carboxylic Acids for High-Performance Perovskite Solar Cells

Metal oxides are commonly employed as electron transport layers (ETLs) for n-i-p perovskite solar cells (PSCs), but the presence of surface traps and their mismatched energy alignment with perovskites limits the corresponding device performance. Therefore, the interfacial modification of ETLs by functional molecules becomes an important strategy for tailoring the interfacial properties and facilitating an efficient charge extraction and transport in PSCs. However, an in-depth understanding of the influences of their molecular structures on the surface chemistry and electronic properties of ETLs is rarely discussed. Herein, three carboxylic acid-based molecules with different chemical structures were employed to modify the SnO₂ ETL and their effects on the performance of PSCs were systematically investigated. We found that the alkyl-chain length and carboxyl number in molecular structures can dramatically alter their binding strength to SnO₂, providing a good strategy to fine-tune their film quality, electron mobility, and energy offset at the cathode interface. Benefiting from the optimal coordination ability of citric acid (CA) to SnO₂, the corresponding PSCs show better charge transport properties and suppressed nonradiative recombination, leading to a champion efficiency of 23.1% with much improved environmental stability, highlighting the potential of rational design of molecular modifiers for high-performance ETLs applied in PSCs.

Caught while Dissolving: Revealing the Interfacial Solvation of the Mg2+ Ions on the MgO Surface

Interfaces between water and materials are ubiquitous and are crucial in materials sciences and in biology, where investigating the interaction of water with the surface under ambient conditions is key to shedding light on the main processes occurring at the interface. Magnesium oxide is a popular model system to study the metal oxide-water interface, where, for sufficient water loadings, theoretical models have suggested that reconstructed surfaces involving hydrated Mg²⁺ metal ions may be energetically favored. In this work, by combining experimental and theoretical surface-selective ambient pressure X-ray absorption spectroscopy with multivariate curve resolution and molecular dynamics, we evidence in real time the occurrence of Mg²⁺ solvation at the interphase between MgO and solvating media such as water and methanol (MeOH). Further, we show that the Mg²⁺ surface ions undergo a reversible solvation process, we prove the dissolution/redeposition of the Mg²⁺ ions belonging to the MgO surface, and we demonstrate the formation of octahedral [Mg(H₂O)₆]²⁺ and [Mg(MeOH)₆]²⁺ intermediate solvated species. The unique surface, electronic, and structural sensitivity of the developed technique may be beneficial to access often elusive properties of low-Z metal ion intermediates involved in interfacial processes of chemical and biological interest.

Time-resolved terahertz-Raman spectroscopy reveals that cations and anions distinctly modify intermolecular interactions of water

The solvation of ions changes the physical, chemical and thermodynamic properties of water, and the microscopic origin of this behaviour is believed to be ion-induced perturbation of water's hydrogen-bonding network. Here we provide microscopic insights into this process by monitoring the dissipation of energy in salt solutions using time-resolved terahertz-Raman spectroscopy. We resonantly drive the low-frequency rotational dynamics of water molecules using intense terahertz pulses and probe the Raman response of their intermolecular translational motions. We find that the intermolecular rotational-to-translational energy transfer is enhanced by highly charged cations and is drastically reduced by highly charged anions, scaling with the ion surface charge density and ion concentration. Our molecular dynamics simulations reveal that the water-water hydrogen-bond strength between the first and second solvation shells of cations increases, while it decreases around anions. The opposite effects of cations and anions on the intermolecular interactions of water resemble the effects of ions on the stabilization and denaturation of proteins.

Hydrovoltaic technology: from mechanism to applications

Water is a colossal reservoir of clean energy as it adsorbs thirty-five percent of solar energy reaching the Earth's surface. More than half of the adsorbed energy turns into latent heat for water evaporation, driving the water cycle of the Earth.¹ Yet, only very limited energy in the water cycle is harvested by current industrial technologies. The past decade has witnessed the emergence of hydrovoltaic technology, which generates electricity from nanomaterials by direct interaction with water and enables energy harvesting from the water cycle such as from rain, waves, flows, moisture and natural evaporation. Years of efforts have been committed to improve the conversion efficiency of hydrovoltaic devices through chemical synthesis of advanced nanomaterials and innovative design of device structures. Further development of this field, however, still requires in-depth understanding of hydrovoltaic mechanisms and boosting of the electrical outputs for wider applications. Here, we present a tutorial review of different mechanisms of generating electricity from droplets, flows, natural evaporation and ambient moisture by analyzing basic interactions at various water-material interfaces. Key aspects in raising the output power of hydrovoltaic devices are then discussed in terms of material synthesis, structural design, and device optimization. We also provide an outlook on the potential applications of this technology ranging from sensors, power suppliers to multifunctional systems as well as on the scientific and technological challenges in transforming its potential into practical utility. The prospects of this emerging field are considered for future endeavor.

Significance of Shewanella Species for the Phytoavailability and Toxicity of Arsenic-A Review

Simple Summary

The availability of some toxic heavy metals, such as arsenic (As), is related to increased human and natural activities. This type of metal availability in the environment is associated with various health and environmental issues. Such problems may arise due to direct contact with or consumption of plant products containing this metal in some of their parts. A microbial approach that employs a group of bacteria (Shewanella species) is proposed to reduce the negative consequences of the availability of this metal (As) in the environment. This innovative strategy can reduce As mobility, its spread, and uptake by plants in the environment. The benefits of this approach include its low cost and the possibility of not exposing other components of the environment to unfavourable consequences.

Abstract

The distribution of arsenic continues due to natural and anthropogenic activities, with varying degrees of impact on plants, animals, and the entire ecosystem. Interactions between iron (Fe) oxides, bacteria, and arsenic are significantly linked to changes in the mobility, toxicity, and availability of arsenic species in aquatic and terrestrial habitats. As a result of these changes, toxic As species become available, posing a range of threats to the entire ecosystem. This review elaborates on arsenic toxicity, the mechanisms of its bioavailability, and selected remediation strategies. The article further describes how the detoxification and methylation mechanisms used by Shewanella species could serve as a potential tool for decreasing phytoavailable As and lessening its contamination in the environment. If taken into account, this approach will provide a globally sustainable and cost-effective strategy for As remediation and more information to the literature on the unique role of this bacterial species in As remediation as opposed to conventional perception of its role as a mobiliser of As.

Interfacial Pockels Effect of Solvents with a Larger Static Dielectric Constant than Water and an Ionic Liquid on the Surface of a Transparent Oxide Electrode

The optical Pockels effect is a change in the refractive index proportional to an applied electric field. As a typical example of the interfacial Pockels effect occurring at interfaces where the spatial inversion symmetry is broken, it is known that water in the electric double layer (EDL) on the transparent oxide electrode surface has a large Pockels coefficient, but the physical factors that determine its size are not clear. Therefore, we experimentally studied the Pockels effect of water and other characteristic liquids—formamide (FA), methylformamide (NMF) (these two have larger static dielectric constants than water), dimethylformamide (DMF), and an ionic liquid that is itself salts (IL, [BMIM] [BF4])—and evaluated their Pockels coefficients in the EDL on the transparent electrode surface. The magnitude of the Pockels coefficient was found to be in the order of water, DMF, FA, NMF, and IL, with the magnitude of the static dielectric constant not being an important factor.

Application of Magnesium Oxide Media for Remineralization and Removal of Divalent Metals in Drinking Water Treatment: A Review

The post-treatment of soft and desalinated waters is an integral step in the production of quality drinking water. Remineralization is therefore often essential in order to stabilize the effluent for distribution and to attain mineral levels that fulfill aesthetic and health goals. According to the World Health Organization, magnesium (Mg2+) is a nutrient essential to human health. This review summarizes the effectiveness of magnesium oxide (MgO) media for soft water remineralization, as well as its potential for divalent metal removal (e.g., Mn, Cu, and Zn), which is of particular interest in small or residential applications. We present MgO sources, properties, and dissolution mechanisms. Water treatment applications are then reviewed, and the available design models are critically appraised in regard to remineralization and contaminant removal processes. In addition, we review the process operation challenges and costs. Finally, we discuss the use of MgO in combination with calcite and address the technical advantages and limitations compared to other available methods.

Biogenic iron sulfide functioning as electron-mediating interface to accelerate dissimilatory ferrihydrite reduction by Shewanella oneidensis MR-1

Microbially driven iron and sulfur geochemical cycles co-exist ubiquitously in subsurface environments and are of environmental relevance. Shewanella species (dissimilatory metal-reducing bacteria) are capable of reducing Fe(III)-(oxyhydr)oxide minerals and diverse sulfur sources using corresponding metabolic pathways and producing FeS secondary minerals. In spite of the ability in promoting bacterial extracellular electron transfer (EET), the specific role of FeS in mediating EET between microbe/mineral interface is still unclear. In this work, the electron-mediating function of biogenic FeS on promoting the reduction of ferrihydrite by S. oneidensis MR-1 using thiosulfate as sulfur source was investigated in terms of Fe(III) reduction percentage, X-ray diffraction and scanning electron microscopy. The results showed that the microbial ferrihydrite reduction was pH-dependent and positively correlated with the addition of thiosulfate. In the presence of thiosulfate, biogenic FeS in nano-scale were formed and deposited on the surfaces of S. oneidensis MR-1 and ferrihydrite to build an interfacial electron transfer bridge between them. The addition of either thiosulfate and in-vitro FeS could rescue the entirely inactivated ability of the mutant (△omcA/mtrC) in ferrihydrite reduction to some extent, but which was obviously inferior to the wild-type strain. Meanwhile, the effect of the biogenic FeS in-situ coating on the surfaces of S. oneidensis MR-1 cells on promoting microbial ferrihydrite reduction was significantly superior to the in-vitro ones. Thus, the in-situ formed biogenic FeS secondary minerals were demonstrated to mediate and accelerate interfacial electron transfer from S. oneidensis MR-1 cells to ferrihydrite through interfacing with the bacterial EET routes, especially Mtr pathway. This work provides an insight into the secondary minerals-mediating interfacial electron transfer between microbes and minerals in the presence of biological S (-II), which has important biogeochemical and environmental implications.

Arsenic biotransformation and mobilization: the role of bacterial strains and other environmental variables

Over several decades, arsenic (As) toxicity in the biosphere has affected different flora, fauna, and other environmental components. The majority of these problems are linked with As mobilization due to bacterial dissolution of As-bearing minerals and its transformation in other reservoirs such as soil, sediments, and ground water. Understanding the process, mechanism, and various bacterial species involved in these processes under the influence of some ecological variables greatly contributes to a better understanding of the fate and implications of As mobilization into the environments. This article summarizes the process, role, and various types of bacterial species involved in the transformation and mobilization of As. Furthermore, insight into how Fe(II) oxidation and resistance mechanisms such as methylation and detoxification against the toxic effect of As(III) was highlighted as a potential immobilization and remediation strategy in As-contaminated sites. Furthermore, the significance and comparative advantages of some useful analytical tools used in the evaluation, speciation, and analysis of As are discussed and how their in situ and ex situ applications support assessing As contamination in both laboratory and field settings. Nevertheless, additional research involving advanced molecular techniques is required to elaborate on the contribution of these bacterial consortia as a potential agronomic tool for reducing As availability, particularly in natural circumstances. Graphical abstract. Courtesy of conceptual model: Aminu Darma.

Surface differences of oxide nanocrystals determined by geometry and exogenously coordinated water molecules

Both atomic geometry and the influence of surroundings (e.g., exogenously coordinated water) are key issues for determining the chemical environment of oxide surfaces, whereas the latter is usually ignored and should be considered in future studies.

Using the Isalos platform to develop a (Q)SAR model that predicts metal oxide toxicity utilizing facet-based electronic, image analysis-based, and periodic table derived properties as descriptors

Engineered nanoparticles (NPs) are being studied for their potential to harm humans and the environment. Biological activity, toxicity, physicochemical properties, fate, and transport of NPs must all be evaluated and/or predicted. In this work, we explored the influence of metal oxide nanoparticle facets on their toxicity towards bronchial epithelial (BEAS-2B), Murine myeloid (RAW 264.7), and E. coli cell lines. To estimate the toxicity of metal oxide nanoparticles grown to a low facet index, a quantitative structure–activity relationship ((Q)SAR) approach was used. The novel model employs theoretical (density functional theory calculations) and experimental studies (transmission electron microscopy images from which several particle descriptors are extracted and toxicity data extracted from the literature) to investigate the properties of faceted metal oxides, which are then utilized to construct a toxicity model. The classification mode of the k-nearest neighbour algorithm (EnaloskNN, Enalos Chem/Nanoinformatics) was used to create the presented model for metal oxide cytotoxicity. Four descriptors were identified as significant: core size, chemical potential, enthalpy of formation, and electronegativity count of metal oxides. The relationship between these descriptors and metal oxide facets is discussed to provide insights into the relative toxicities of the nanoparticle. The model and the underpinning dataset are freely available on the NanoSolveIT project cloud platform and the NanoPharos database, respectively.

Adsorption of small organic acids and polyphenols on hematite surfaces: Density Functional Theory + thermodynamics analysis

HYPOTHESIS

The interactions of organic molecules with mineral surfaces are influenced by several factors such as adsorbate speciation, surface atomic and electronic structure, and environmental conditions. When coupled with thermodynamic techniques, energetics from atomistic modeling can provide a molecular-level picture of which factors determine reactivity. This is paramount for evaluating the chemical processes which control the fate of these species in the environment.

EXPERIMENTS

Inner-sphere adsorption of oxalate and pyrocatechol on (001), (110), and (012) α-Fe₂O₃ surfaces was modeled using Density Functional Theory (DFT). Unique bidentate binding modes were sampled along each facet to study how different adsorbate and surface factors govern site preference. Adsorption energetics were then calculated using a DFT + thermodynamics approach which combines DFT energies with tabulated data and Nernst-based corrective terms to incorporate different experimental parameters.

FINDINGS

Instead of a universal trend, each facet displays a unique factor that dominates site preference based on either strain (001), functional groups (110), or topography (012). Adsorption energies predict favorable inner-sphere adsorption for both molecules but opposite energetic trends with varying pH. Additionally, vibrational analysis was conducted for each system and compared to experimental IR data. The work presented here provides an effective, computational methodology to study numerous adsorption processes occurring at the surface-aqueous interface.

A Pragmatic Perspective of the Antibacterial Properties of Metal-Based Nanoparticles

A consideration of the antibacterial efficacy of metal-based nanoparticles, from the point of view of their physicochemical properties, suggests that such efficacy arises from the protein coronas that form around them, and that the contents of the coronas depend on the chemical groups found on the nanoparticle surfaces. We offer a new perspective and new insights, making use of our earlier observations of the physicochemical properties of nanoparticle surfaces, to propose that the nanoparticle serves as a mediator for the formation and activation of the protein corona, which attacks the bacterium. That is, the nanoparticle enhances the body’s natural defenses, using proteins present in body fluids.

Atmosphere-sensitive photoluminescence of Co x Fe3-x O4 metal oxide nanoparticles

In this work the photoluminescence (PL) of Co _x Fe_3-x O₄ spinel oxide nanoparticles under pulsed UV laser irradiation (λ _exc = 270 nm) is investigated for varying Co/Fe ratios (x = 0.4_⋯2.5). A broad emission in the green spectral range is observed, exhibiting two maxima at around 506 nm, which is dominant for Fe-rich nanoparticles (x = 0.4, 0.9), and at around 530 nm, that is more pronounced for Co-rich nanoparticles (x > 1.6). As examinations in different atmospheres show that the observed emission reacts sensitively to the presence of water, it is proposed that the emission is mainly caused by OH groups with terminal or bridging metal-O bonds on the Co _x Fe_3-x O₄ surface. Raman spectroscopy supports that the emission maximum at 506 nm corresponds to terminal OH groups bound to metal cations on tetrahedral sites (i.e., Fe³⁺), while the maximum around 530 nm corresponds to terminal OH groups bound to metal cations on octahedral sites (i.e., Co³⁺). Photoinduced dehydroxylation shows that OH groups can be removed on Fe-rich nanoparticles more easily, leading to a conversion process and the formation of new OH groups with different bonds to the surface. As such behavior is not observed for Co _x Fe_3-x O₄ with x > 1.6, we conclude that the OH groups are more stable against dehydroxylation on Co-rich nanoparticles. The higher OH stability is expected to lead to a higher catalytic activity of Co-rich cobalt ferrites in the electrochemical generation of oxygen.

Evaluation of electrochemical properties of nanostructured metal oxide electrodes immersed in redox-inactive organic media

This paper describes analysis of dropcast nanocrystalline and electrochemically deposited films of NiO and α-Fe₂O₃ as model metal oxide semiconductors immersed in redox-inactive organic electrolyte solutions using electrochemical impedance spectroscopy (EIS). Although the data reported here fit a circuit commonly used to model EIS data of metal oxide electrodes, which comprises an RC circuit nested inside a second RC circuit that is in series with a resistor, our interpretation of the physical meaning of these circuit elements differs from that applied to EIS measurements of metal oxide electrodes immersed in redox-active media. The data presented here are most consistent with an interpretation in which the nested RC circuit represents charge transfer between the metal oxide film and the underlying metal electrode, and the non-nested RC circuit represents the resistance and capacitance associated with formation of a charge-compensating double-layer at the exposed interface between the metal electrode and electrolyte solution. Applying this interpretation to analysis of EIS data collected for metal oxide films in organic media enables the impact of film morphology on electrochemical behavior to be distinguished from the effects of the intrinsic electronic structure of the metal oxide. This distinction is crucial to the evaluation of nanostructured metal oxide electrodes for electrochemical energy storage and electrocatalysis applications.

Importance of Surface Topography in Both Biological Activity and Catalysis of Nanomaterials: Can Catalysis by Design Guide Safe by Design?

It is acknowledged that the physicochemical properties of nanomaterials (NMs) have an impact on their toxicity and, eventually, their pathogenicity. These properties may include the NMs’ surface chemical composition, size, shape, surface charge, surface area, and surface coating with ligands (which can carry different functional groups as well as proteins). Nanotopography, defined as the specific surface features at the nanoscopic scale, is not widely acknowledged as an important physicochemical property. It is known that the size and shape of NMs determine their nanotopography which, in turn, determines their surface area and their active sites. Nanotopography may also influence the extent of dissolution of NMs and their ability to adsorb atoms and molecules such as proteins. Consequently, the surface atoms (due to their nanotopography) can influence the orientation of proteins as well as their denaturation. However, although it is of great importance, the role of surface topography (nanotopography) in nanotoxicity is not much considered. Many of the issues that relate to nanotopography have much in common with the fundamental principles underlying classic catalysis. Although these were developed over many decades, there have been recent important and remarkable improvements in the development and study of catalysts. These have been brought about by new techniques that have allowed for study at the nanoscopic scale. Furthermore, the issue of quantum confinement by nanosized particles is now seen as an important issue in studying nanoparticles (NPs). In catalysis, the manipulation of a surface to create active surface sites that enhance interactions with external molecules and atoms has much in common with the interaction of NP surfaces with proteins, viruses, and bacteria with the same active surface sites of NMs. By reviewing the role that surface nanotopography plays in defining many of the NMs’ surface properties, it reveals the need for its consideration as an important physicochemical property in descriptive and predictive toxicology. Through the manipulation of surface topography, and by using principles developed in catalysis, it may also be possible to make safe-by-design NMs with a reduction of the surface properties which contribute to their toxicity.

Dispersion of hazardous nanoparticles on beaches around phosphogypsum factories

Anthropogenic occurring nanoparticles (NPs) have been one of the principal catalytic components of marine pollution throughout its history. The phosphogypsum (PG) factories present environmental risks and evident marine pollution in different parts of the world. Many of these factors continue to operate, however, some have already been abandoned by the private sector. The general objective of this manuscript is to analyze the real nanoparticles (NPs) present on a beach in southern Brazil to illustrate the need to create public policies and projects for environmental recovery. This work focused on real representative sampling of suspended sediments (SSs), and on a modern analytical procedure via advanced electron microscopes (field emission scanning electron microscope-FE-SEM and high resolution transmission electron microscope-HR-TEM coupled with an energy dispersive X-ray microanalysis system-EDS) to analyze NPs containing hazardous elements (HEs). The results presented in this work demonstrate who the size, morphology, among other physical-geochemical characteristics influence in the adsorption of HEs by the NPs and their respective agglomerates. This study is of great importance for carrying out the application of advanced techniques and methods to better understand the formation and transport of NPs on beaches, which allows assisting in the management of waste from plaster factories on a global scale.

Nano- and Microscale Optical and Electrical Biointerfaces and Their Relevance to Energy Research

Different research fields in energy sciences, such as photovoltaics for solar energy conversion, supercapacitors for energy storage, electrocatalysis for clean energy conversion technologies, and materials-bacterial hybrid for CO₂ fixation have been under intense investigations over the past decade. In recent years, new platforms for biointerface designs have emerged from the energy conversion and storage principles. This paper reviews recent advances in nano- and microscale materials/devices for optical and electrical biointerfaces. First, a connection is drawn between biointerfaces and energy science, and how these two distinct research fields can be connected is summarized. Then, a brief overview of current available tools for biointerface studies is presented. Third, three representative biointerfaces are reviewed, including neural, cardiac, and bacterial biointerfaces, to show how to apply these tools and principles to biointerface design and research. Finally, two possible future research directions for nano- and microscale biointerfaces are proposed.

Pyrolysis of penicillin fermentation residue and sludge to produce biochar: Antibiotic resistance genes destruction and biochar application in the adsorption of penicillin in water

A process of antibiotic fermentation residue and sludge pyrolysis to produce biochar was proposed, with antibiotic resistance genes destruction and biochar application in the adsorption of penicillin in water. The results showed that the β-lactam resistance genes were completely destroyed during pyrolysis. The prepared biochar from antibiotic fermentation residues (AFRB) and sludge (AFSB) at 800 °C and 600 °C had a good adsorption effect on the low concentration penicillin in water, with removal efficiencies of 93.32% and 98.50% for penicillin in aqueous solution and maximum adsorption capacities of 44.05 mg/g and 23.26 mg/g, respectively. Characterization of AFRB revealed that its surface was predominantly aromatic carbon, AFSB contained significant amounts of Fe₃O₄. Weak interactions (H‧‧‧π, H‧‧‧O˭C, π-π interactions) and active sites (aromatic ring, H and -C˭O groups) of penicillin with aromatic structures on AFRB and the chemisorption (-C˭O-Fe-, -C˭OO-Fe-), and active sites (-C˭O, -COO- groups) of penicillin on the (110) surface of Fe₃O₄ on AFSB were revealed by quantum chemical methods. This work provides a novel pathway for the risk reduction of antibiotic production residue and sludge associated with the generation of biochar for antibiotic removal from the environment.

Predicting hydration layers on surfaces using deep learning

Characterisation of the nanoscale interface formed between minerals and water is essential to the understanding of natural processes, such as biomineralization, and to develop new technologies where function is dominated by the mineral-water interface. Atomic force microscopy offers the potential to characterize solid-liquid interfaces in high-resolution, with several experimental and theoretical studies offering molecular scale resolution by linking measurements directly to water density on the surface. However, the theoretical techniques used to interpret such results are computationally intensive and development of the approach has been limited by interpretation challenges. In this work, we develop a deep learning architecture to learn the solid-liquid interface of polymorphs of calcium carbonate, allowing for the rapid predictions of density profiles with reasonable accuracy.

Molecular Fingerprints of Hydrophobicity at Aqueous Interfaces from Theory and Vibrational Spectroscopies

Hydrophobicity/hydrophilicity of aqueous interfaces at the molecular level results from a subtle balance in the water-water and water-surface interactions. This is characterized here via density functional theory-molecular dynamics (DFT-MD) coupled with vibrational sum frequency generation (SFG) and THz-IR absorption spectroscopies. We show that water at the interface with a series of weakly interacting materials is organized into a two-dimensional hydrogen-bonded network (2D-HB-network), which is also found above some macroscopically hydrophilic silica and alumina surfaces. These results are rationalized through a descriptor that measures the number of "vertical" and "horizontal" hydrogen bonds formed by interfacial water, quantifying the competition between water-surface and water-water interactions. The 2D-HB-network is directly revealed by THz-IR absorption spectroscopy, while the competition of water-water and water-surface interactions is quantified from SFG markers. The combination of SFG and THz-IR spectroscopies is thus found to be a compelling tool to characterize the finest details of molecular hydrophobicity at aqueous interfaces.

Vibrational energy relaxation of interfacial OH on a water-covered α-Al2O3(0001) surface: a non-equilibrium ab initio molecular dynamics study

Vibrational relaxation of adsorbates is a sensitive tool to probe energy transfer at gas/solid and liquid/solid interfaces. The most direct way to study relaxation dynamics uses time-resolved spectroscopy. Here we report on a non-equilibrium ab initio molecular dynamics (NE-AIMD) methodology to model vibrational relaxation of OH vibrations on a hydroxylated, water-covered α-Al₂O₃(0001) surface. In our NE-AIMD approach, after exciting selected O-H bonds their coupling to surface phonons and to the water adlayer is analyzed in detail, by following both the energy flow in time, as well as the time-evolution of Vibrational Density of States (VDOS) curves. The latter are obtained from Time-dependent Correlation Functions (TCFs) and serve as prototypical, generic representatives of time-resolved vibrational spectra. As most important results, (i) we find a few-picosecond lifetime of the excited modes and (ii) identify both hydrogen-bonded aluminols and water molecules in the adsorbed water layer as main dissipative channels, while the direct coupling to Al₂O₃ surface phonons is of minor importance on the timescales of interest. Our NE-AIMD/TCF methodology is powerful for complex adsorbate systems, in principle even reacting ones, and opens a way towards time-resolved vibrational spectroscopy.