Catalytic Activity of Platinum Monolayer on Iridium and Rhenium Alloy Nanoparticles for the Oxygen Reduction Reaction

Two-Dimensional Covalent Framework Derived Nonprecious Transition Metal Single-Atomic-Site Electrocatalyst toward High-Efficiency Oxygen Reduction

Designing an active, stable, and nonprecious metal catalyst substitute for Pt in the oxygen reduction reaction (ORR) is highly demanded for energy-efficient and cost-effective prototype devices. Single-atomic-site catalysts (SASCs) have been widely concerning because of their maximum atomic utilization and precise structural regulation. Despite being challenging, the controllable synthesis of SASCs is crucial for optimizing ORR activity. Here, we demonstrate an ultrathin organometallic framework template-assisted pyrolysis strategy to synthesize SASCs with a unique two-dimensional (2D) architecture. Electrochemical measurements revealed that Fe-SASCs displayed an excellent ORR activity in an alkaline media, having a half-wave potential and a diffusion-limited current density comparable to those of commercial Pt/C. Remarkably, the durability and methanol tolerance of Fe-SASCs were even superior to those of Pt/C. Furthermore, Fe-SASCs displayed a maximum power density of 142 mW cm^-2 with a current density of 235 mA cm^-2 as a cathode catalyst in a zinc-air battery, showing its great potential for practical applications.

Achievements in Pt nanoalloy oxygen reduction reaction catalysts: strain engineering, stability and atom utilization efficiency

The Pt nanoalloy surfaces often show unique electronic and physicochemical properties that are distinct from those of their parent metals, which provide significant room for manipulating their oxygen reduction reaction (ORR) behaviour. In this Feature Article, we present the progress of our recent research and that of other groups in Pt nanoalloy catalysts for ORR from three aspects, namely, strain engineering, stability and atom utilization efficiency. Some new insights into Pt surface strain engineering will be firstly introduced, with a focus on discussing the effect of compressive and tensile strain on the chemisorption properties. Secondly, the design concepts and synthetic methodologies to intensify the inherent stability of Pt nanoalloys will be summarized. Then, the exciting research push in developing nanostructured alloys with high atom utilization efficiency of Pt will be presented. Finally, a brief illumination of challenges and future developing perspectives of Pt nanoalloy catalysts will be provided.

Function-oriented design of robust metal cocatalyst for photocatalytic hydrogen evolution on metal/titania composites

While the precise design of catalysts is one of ultimate goals in catalysis, practical strategies often fall short, especially for complicated photocatalytic processes. Here, taking the hydrogen evolution reaction (HER) as an example, we introduce a theoretical approach for designing robust metal cocatalysts supported on TiO₂ using density functional theory calculations adopting on-site Coulomb correction and/or hybrid functionals. The approach starts with clarifying the individual function of each metal layer of metal/TiO₂ composites in photocatalytic HER, covering both the electron transfer and surface catalysis aspects, followed by conducting a function-oriented optimization via exploring competent candidates. With this approach, we successfully determine and verify bimetallic Pt/Rh/TiO₂ and Pt/Cu/TiO₂ catalysts to be robust substitutes for conventional Pt/TiO₂. The right metal type as well as the proper stacking sequence are demonstrated to be key to boosting performance. Moreover, we tentatively identify the tunneling barrier height as an effective descriptor for the important electron transfer process in photocatalysis on metal/oxide catalysts. We believe that this study pushes forward the frontier of photocatalyst design towards higher water splitting efficiency.

Promoting Effects of Au Submonolayer Shells on Structure-Designed Cu-Pd/Ir Nanospheres: Greatly Enhanced Activity and Durability for Alkaline Ethanol Electro-Oxidation

Rationally engineering the surface physicochemical properties of nanomaterials can improve their activity and durability for various electrocatalytic and energy conversion applications. Cu-Pd/Ir (CPI) nanospheres (NSs) anchored on N-doped porous graphene (NPG) [(CPI NSs/NPG)] have been recently demonstrated as a promising electrocatalyst for the alkaline ethanol oxidation reaction (EOR); to further enhance their electrocatalytic performance, the NPG-supported CPI NSs are coated with Au submonolayer (SML) shells (SMSs), through which their surface physicochemical properties can be tuned. CPI NSs/NPG is prepared by our previously developed method and possesses the special structures of composition-graded Cu₁Pd₁ and surface-doped Ir_0.03. The Au SMSs with designed surface coverages are formed via an electrochemical technology involving incomplete Cu underpotential deposition (UPD) and Au³⁺ galvanic replacement. A distinctive volcano-type relation between the EOR electrocatalytic activity and the Au-SMS surface coverage for CPI@Au_SML NSs/NPG is revealed, and the optimal CPI@Au_1/6ML NSs/NPG greatly surpasses commercial Pd/C and CPI NSs/NPG in electrocatalytic activity and noble metal utilization. More importantly, its electrocatalytic durability in 1 h chronoamperometric and 500-cycle potential cycling degradation tests is also significantly improved. According to detailed physicochemical characterizations, electrochemical analyses, and density functional theory calculations, the promoting effects of the Au SMS for enhancing the EOR electrocatalytic activity and durability of CPI NSs/NPG can be mainly attributed to the greatly weakened carbonaceous intermediate bonding and properly increased surface oxidation potential. This work also proposes a versatile and effective strategy to tune the surface physicochemical properties of metal-based nanomaterials via incomplete UPD and metal-cation galvanic replacement for advancing their electrocatalytic and energy conversion performance.

FeCoSe2 Nanoparticles Embedded in g-C3N4: A Highly Active and Stable bifunctional electrocatalyst for overall water splitting

To investigate cost affordable and robust HER and OER catalysts with significant low overpotentials, we have successfully embedded FeCoSe2 spheres on smooth surfaces of graphitic carbon nitride that demonstrated high stability and electrocatalytic activity for H2 production. We systematically analyzed the composition and morphology of FexCo1-xSe2/g-C3N4 and attributed the remarkable electrochemical performance of the catalyst to its unique structure. Fe0.2Co0.8Se2/g-C3N4 showed a superior HER activity, with quite low overpotential value (83 mV at -20 mA cm-2 in 0.5 M H2SO4) and a current density of -3.24, -7.84, -14.80, -30.12 mA cm-2 at 0 V (vs RHE) in Dulbecco's Phosphate-Buffered Saline (DPBS), artificial sea water (ASW), 0.5 M H2SO4 and 1 M KOH, respectively. To the best of our knowledge, these are the highest reported current densities at this low potential value, showing intrinsic catalytic activity of the synthesized material. Also, the catalyst was found to deliver a high and stable current density of -1000 mA cm-2 at an overpotential of just 317 mV. Moreover, the synthesized catalyst delivered a constant current density of -30 mA cm-2 for 24 h without any noticeable change in potential at -0.2 V. These attributes confer our synthesized catalyst to be used for renewable fuel production and applications.

Shaping well-defined noble-metal-based nanostructures for fabricating high-performance electrocatalysts: advances and perspectives

This review highlights recent advances in shaping protocols and structure-activity relationships of noble-metal-based catalysts with well-defined nanostructures in electrochemical reactions.

Overcoming Site Heterogeneity In Search of Metal Nanocatalysts

Site heterogeneity of metal nanocatalysts poses grand challenges for catalyst design from first principles. To accelerate catalyst discovery, it is of pivotal importance to develop an approach that efficiently maps catalytic activity of nanoparticles onto geometry-based descriptors while considering the geometric strain and metal ligand of an active site. We demonstrate that there exist linear correlations between orbitalwise coordination numbers CN^α and free formation energies of oxygen species (e.g., *OH and *OOH) at Pt sites. Kinetic analysis along with herein developed structure-activity relationships accurately predicts the activity trend of pure Pt nanoparticles (∼1-7 nm) toward oxygen reduction. Application of the approach to a search of Pt nanoalloys leads to several Pt monolayer core-shell nanostructures with enhanced oxygen reduction activity and reduced cost. The approach presented here facilitates a transition from traditional single-crystal models to nanoparticles in theory-guided catalyst discovery.

Negatively charged boron nitride nanosheets as a potential metal-free electrocatalyst for the oxygen reduction reaction: a computational study

The negative charged boron nitride nanosheet is a novel metal free catalysts for the oxygen reduction reaction.

Au–Ir nanoalloy nucleation during the gas-phase condensation: a comprehensive MD study including different effects

The number of formed clusters and their size increases with the increasing temperature and pressure, which is in good agreement with the experimental results.

An exploration of the use of Au submonolayer decorated Pd7Ir nanoparticles as a highly active electrocatalyst for the ethanol oxidation reaction in alkaline media

An activity promotion over 130% from the use of Au submonolayer on carbon supported Pd₇Ir nanoparticles as highly active electrocatalyst for EOR.

Catalytic Hydrodeoxygenation of High Carbon Furylmethanes to Renewable Jet-fuel Ranged Alkanes over a Rhenium-Modified Iridium Catalyst

Renewable jet-fuel-range alkanes are synthesized by hydrodeoxygenation of lignocellulose-derived high-carbon furylmethanes over ReO_x -modified Ir/SiO₂ catalysts under mild reaction conditions. Ir-ReO_x /SiO₂ with a Re/Ir molar ratio of 2:1 exhibits the best performance, achieving a combined alkanes yield of 82-99 % from C₁₂ -C₁₅ furylmethanes. The catalyst can be regenerated in three consecutive cycles with only about 12 % loss in the combined alkanes yield. Mechanistically, the furan moieties of furylmethanes undergo simultaneous ring saturation and ring opening to form a mixture of complex oxygenates consisting of saturated furan rings, mono-keto groups, and mono-hydroxy groups. Then, these oxygenates undergo a cascade of hydrogenolysis reactions to alkanes. The high activity of Ir-ReO_x /SiO₂ arises from a synergy between Ir and ReO_x , whereby the acidic sites of partially reduced ReO_x activate the C-O bonds of the saturated furans and alcoholic groups while the Ir sites are responsible for hydrogenation with H₂ .

Mechanisms of Enhanced Electrocatalytic Activity for Oxygen Reduction Reaction on High-Index Platinum n(111)-(111) Surfaces

Oxygen reduction reactions (ORRs) on high-index planes of Pt n(111)-(111) were studied by density functional theory (DFT). The stepped surfaces, where n = 2, 3, and 4, showed that O2, O, and OH exhibited higher binding energies along the step compared to the terrace plane. The Pt atoms along the step can become distorted through the binding of the O and OH, where the shift in position of the Pt atoms is the largest along the stepped sites, hence forming stronger bonds with O atoms. One of the two O atoms produced from the bond dissociation of O2 will push the other one down a step with lower binding energies, consequently reducing the energy required for the protonation reaction (O + H(+) → OH, and OH + H(+) → H2O). The quicker recovery back to the clean Pt surface would therefore improve the catalytic properties of Pt nanoparticles, especially those with exposure to high-indexed facets.

Pt monolayer coating on complex network substrate with high catalytic activity for the hydrogen evolution reaction

A deposition process has been developed to fabricate a complete-monolayer Pt coating on a large-surface-area three-dimensional (3D) Ni foam substrate using a buffer layer (Ag or Au) strategy. The quartz crystal microbalance, current density analysis, cyclic voltammetry integration, and X-ray photoelectron spectroscopy results show that the monolayer deposition process accomplishes full coverage on the substrate and the deposition can be controlled to a single atomic layer thickness. To our knowledge, this is the first report on a complete-monolayer Pt coating on a 3D bulk substrate with complex fine structures; all prior literature reported on submonolayer or incomplete-monolayer coating. A thin underlayer of Ag or Au is found to be necessary to cover a very reactive Ni substrate to ensure complete-monolayer Pt coverage; otherwise, only an incomplete monolayer is formed. Moreover, the Pt monolayer is found to work as well as a thick Pt film for catalytic reactions. This development may pave a way to fabricating a high-activity Pt catalyst with minimal Pt usage.

The atomistic origin of the extraordinary oxygen reduction activity of Pt3Ni7 fuel cell catalysts

Recently Debe et al. reported that Pt3Ni7 leads to extraordinary Oxygen Reduction Reaction (ORR) activity. However, several reports show that hardly any Ni remains in the layers of the catalysts close to the surface ("Pt-skin effect"). This paradox that Ni is essential to the high catalytic activity with the peak ORR activity at Pt3Ni7 while little or no Ni remains close to the surface is explained here using large-scale first-principles-based simulations. We make the radical assumption that processing Pt-Ni catalysts under ORR conditions would leach out all Ni accessible to the solvent. To simulate this process we use the ReaxFF reactive force field, starting with random alloy particles ranging from 50% Ni to 90% Ni and containing up to ∼300 000 atoms, deleting the Ni atoms, and equilibrating the resulting structures. We find that the Pt3Ni7 case and a final particle radius around 7.5 nm lead to internal voids in communication with the exterior, doubling the external surface footprint, in fair agreement with experiment. Then we examine the surface character of these nanoporous systems and find that a prominent feature in the surface of the de-alloyed particles is a rhombic structure involving 4 surface atoms which is crystalline-like but under-coordinated. Using density-functional theory, we calculate the energy barriers of ORR steps on Pt nanoporous catalysts, focusing on the Oad-hydration reaction (Oad + H2Oad → OHad + OHad) but including the barriers of O2 dissociation (O2ad → Oad + Oad) and water formation (OHad + Had → H2Oad). We find that the reaction barrier for the Oad-hydration rate-determining-step is reduced significantly on the de-alloyed surface sites compared to Pt(111). Moreover we find that these active sites are prevalent on the surface of particles de-alloyed from a Pt-Ni 30 : 70 initial composition. These simulations explain the peak in surface reactivity at Pt3Ni7, and provide a rational guide to use for further optimization of improved catalytic and nanoporous materials.

Spongelike nanoporous Pd and Pd/Au structures: facile synthesis and enhanced electrocatalytic activity

This paper reports the facile synthesis and characterization of spongelike nanoporous Pd (snPd) and Pd/Au (snPd/Au) prepared by a tailored galvanic replacement reaction (GRR). Initially, a large amount of Co particles as sacrificial templates was electrodeposited onto the glassy carbon surface using a cyclic voltammetric method. This is the key step to the subsequent fabrication of the snPd/Au (or snPd) architectures by a surface replacement reaction. Using Co films as sacrificial templates, snPd/Au catalysts were prepared through a two-step GRR technique. In the first step, the Pd metal precursor (at different concentrations), K2PdCl4, reacted spontaneously to the formed Co frames through the GRR, resulting in a snPd series. snPd/Au was then prepared via the second GRR between snPd (prepared with 27.5 mM Pd precursor) and Au precursor (10 mM HAuCl4). The morphology and surface area of the prepared snPd series and snPd/Au were characterized using spectroscopic and electrochemical methods. Rotating disk electrode (RDE) experiments for oxygen reduction in 0.1 M NaOH showed that the snPd/Au has higher catalytic activity than snPd and the commercial Pd-20/C and Pt-20/C catalysts. Rotating ring-disk electrode (RRDE) experiments reconfirmed that four electrons were involved in the electrocatalytic reduction of oxygen at the snPd/Au. Furthermore, RDE voltammetry for the H2O2 oxidation/reduction was used to monitor the catalytic activity of snPd/Au. The amperometric i-t curves of the snPd/Au catalyst for a H2O2 electrochemical reaction revealed the possibility of applications as a H2O2 oxidation/reduction sensor with high sensitivity (0.98 mA mM(-1) cm(-2) (r = 0.9997) for H2O2 oxidation and -0.95 mA mM(-1) cm(-2) (r = 0.9997) for H2O2 reduction), low detection limit (1.0 μM), and a rapid response (<∼1.5 s).

Mechanisms for enhanced performance of platinum-based electrocatalysts in proton exchange membrane fuel cells

As a new generation of power sources, fuel cells have shown great promise for application in transportation. However, the expensive catalyst materials, especially the cathode catalysts for oxygen reduction reaction (ORR), severely limit the widespread commercialization of fuel cells. Therefore, this review article focuses on platinum (Pt)-based electrocatalysts for ORR with better catalytic performance and lower cost. Major breakthroughs in the improvement of activity and durability of electrocatalysts are discussed. Specifically, on one hand, the enhanced activity of Pt has been achieved through crystallographic control, ligand effect, or geometric effect; on the other hand, improved durability of Pt-based cathode catalysts has been realized by means of the incorporation of another noble metal or the morphological control of nanostructures. Furthermore, based on these improvement mechanisms, rationally designed Pt-based nanoparticles are summarized in terms of different synthetic strategies such as wet-chemical synthesis, Pt-skin catalysts, electrochemically dealloyed nanomaterials, and Pt-monolayer deposition. These nanoparticulate electrocatalysts show greatly enhanced catalytic performance towards ORR, aiming not only to outperform the commercial Pt/C, but also to exceed the US Department of Energy 2015 technical target ($30/kW and 5000 h).

Layered SiC sheets: a potential catalyst for oxygen reduction reaction

The large-scale practical application of fuel cells cannot come true if the high-priced Pt-based electrocatalysts for oxygen reduction reaction (ORR) cannot be replaced by other efficient, low-cost, and stable electrodes. Here, based on density functional theory (DFT), we exploited the potentials of layered SiC sheets as a novel catalyst for ORR. From our DFT results, it can be predicted that layered SiC sheets exhibit excellent ORR catalytic activity without CO poisoning, while the CO poisoning is the major drawback in conventional Pt-based catalysts. Furthermore, the layered SiC sheets in alkaline media has better catalytic activity than Pt(111) surface and have potential as a metal-free catalyst for ORR in fuel cells.

Pt/C trapped in activated graphitic carbon layers as a highly durable electrocatalyst for the oxygen reduction reaction

A nitrogen-doped graphitic carbon layer was elaborately introduced into the Pt/C surface so that Pt NPs could survive the pyrolyzation.

Tailoring the catalytic activity of electrodes with monolayer amounts of foreign metals

During the past decade, electrocatalysis has attracted significant attention primarily due to the increased interest in the development of new generations of devices for electrochemical energy conversion. This has resulted in a progress in both fundamental understanding of the complex electrocatalytic systems and in the development of efficient synthetic schemes to tailor the surface precisely at the atomic level. One of the viable concepts in electrocatalysis is to optimise the activity through the direct engineering of the properties of the topmost layers of the surface, where the reactions take place, with monolayer and sub-monolayer amounts of metals. This forms (bi)metallic systems where the electronic structure of the active sites is optimised using the interplay between the nature and position of the atoms of solute metals at the surface. In this review, we focus on recent theoretical and experimental achievements in designing efficient (bi)metallic electrocatalysts with selective positioning of foreign atoms to form a variety of active catalytic sites at the electrode surface. We summarize recent results published in the literature and outline challenges for computational and experimental electrocatalysis to engineer active and selective catalysts using atomic layers.

The deposition of Au-Pt core-shell nanoparticles on reduced graphene oxide and their catalytic activity

Au-Pt core-shell nanoparticles have been synthesized on a reduced graphene oxide (RGO) surface by an under-potential deposition (UPD) redox replacement technique, which involves redox replacement of a copper UPD monolayer by PtCl₄²⁻ that could be reduced and deposited simultaneously. Scanning electron microscopy (SEM) and electrochemical methods have been used to characterize the graphene decorated with Au-Pt core-shell nanoparticles. The electrochemical experiments show that the materials exhibit excellent catalytic activity towards the oxygen reduction reaction and the methanol oxidation reaction. It is believed that the high-performance of this new catalyst is due to the ultrathin Pt shell on the Au nanoparticles surface and the oxygen-containing functional groups on the RGO surface.