High-Pressure XPS of Crotyl Alcohol Selective Oxidation over Metallic and Oxidized Pd(111)

Two-dimensional template-directed synthesis of one-dimensional kink-rich Pd3Pb nanowires for efficient oxygen reduction

Developing facile synthetic strategies toward ultrafine one-dimensional (1D) nanowires (NWs) with rich catalytic hot spots is pivotal for exploring effective heterogeneous catalysts. Herein, we demonstrate a two-dimensional (2D) template-directed strategy for synthesizing 1D kink-rich Pd₃Pb NWs with abundant grain boundaries to serve as high-efficiency electrocatalysts toward oxygen reduction reaction (ORR). In this one-pot synthesis, ultrathin Pd nanosheets were initially generated, which then served as self-sacrificial 2D nano-templates. A dynamic equilibrium growth was subsequently established on the 2D Pd nanosheets through the center-selected etching of Pd atoms and edge-preferred co-deposition of Pd/Pb atoms. This was followed by the oriented attachment of the generated Pd/Pb alloy nanograins and fragments. Thus, kink-rich Pd₃Pb NWs with rich grain boundary defects were obtained in high yield, and these NWs were used as electrocatalytic active catalysts. The surface electronic interaction between Pd and Pb atoms effectively decreased the surface d-band center to weaken the binding of oxygen-containing intermediates toward improved ORR kinetics. Specifically, the kink-rich Pd₃Pb NWs/C catalyst delivered outstanding ORR mass activity and specific activity (2.26 A⋅mg_Pd^-1 and 2.59 mA⋅cm^-2, respectively) in an alkaline solution. These values were respectively 13.3 and 10.8 times those of state-of-the-art commercial Pt/C catalyst. This study provides an innovative strategy for fabricating defect-rich low-dimensional nanocatalysts for efficient energy conversion catalysis.

Palladium-doped hierarchical ZSM-5 for catalytic selective oxidation of allylic and benzylic alcohols

Hierarchical zeolites have the potential to provide a breakthrough in transport limitation, which hinders pristine microporous zeolites and thus may broaden their range of applications. We have explored the use of Pd-doped hierarchical ZSM-5 zeolites for aerobic selective oxidation (selox) of cinnamyl alcohol and benzyl alcohol to their corresponding aldehydes. Hierarchical ZSM-5 with differing acidity (H-form and Na-form) were employed and compared with two microporous ZSM-5 equivalents. Characterization of the four catalysts by X-ray diffraction, nitrogen porosimetry, NH₃ temperature-programmed desorption, CO chemisorption, high-resolution scanning transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy allowed investigation of their porosity, acidity, as well as Pd active sites. The incorporation of complementary mesoporosity, within the hierarchical zeolites, enhances both active site dispersion and PdO active site generation. Likewise, alcohol conversion was also improved with the presence of secondary mesoporosity, while strong Brønsted acidity, present solely within the H-form systems, negatively impacted overall selectivity through undesirable self-etherification. Therefore, tuning support porosity and acidity alongside active site dispersion is paramount for optimal aldehyde production.

Engineering the Metal/Oxide Interface of Pd Nanowire@CuOx Electrocatalysts for Efficient Alcohol Oxidation Reaction

The development of new type electrocatalysts with promising activity and antipoisoning ability is of great importance for electrocatalysis on alcohol oxidation. In this work, Pd nanowire (PdNW)/CuO_x heterogeneous catalysts with different types of PdOCu interfaces (Pd/amorphous or crystalline CuO_x ) are prepared via a two-step hydrothermal strategy followed by an air plasma treatment. Their interface-dependent performance on methanol and ethanol oxidation reaction (MOR and EOR) is clearly observed. The as-prepared PdNW/crystalline CuO_x catalyst with 17.2 at% of Cu on the PdNW surface exhibits better MOR and EOR activity and stability, compared with that of PdNW/amorphous CuO_x and pristine PdNW catalysts. Significantly, both the cycling tests and the chronoamperometric measurements reveal that the PdNW/crystalline CuO_x catalyst yields excellent tolerance toward the possible intermediates including formaldehyde, formic acid, potassium carbonate, and carbon monoxide generated during the MOR process. The detailed analysis of their chemical state reveals that the enhanced activity and antipoison ability of the PdNW/crystalline CuO_x catalyst originates from the electron-deficient Pd^δ+ active sites which gradually turn into Pd₅ O₄ species during the MOR catalysis. The Pd₅ O₄ species can likely be stabilized by moderate crystalline CuO_x decorated on the surface of PdNW due to the strong PdOCu interaction.

Shining light on the solid–liquid interface: in situ/operando monitoring of surface catalysis

Many industrially important chemical transformations occur at the interface between a solid catalyst and liquid reactants. In situ and operando spectroscopies offer unique insight into the reactivity of such catalytically active solid–liquid interfaces.

Solvent-Free Catalytic Oxidation of Benzyl Alcohol over Au-Pd Bimetal Deposited on TiO2: Comparison of Rutile, Brookite, and Anatase

TiO₂ (P25)-supported Au-Pd bimetal nanoparticles displayed excellent performance in the solvent-free benzyl alcohol catalytic oxidation. However, little research attention has been paid to investigate the effects of TiO₂ form on the catalytic activity of Au-Pd/TiO₂. In the present research, rutile, brookite, and anatase TiO₂ were successfully synthesized and subsequently applied as the carrier to load Au-Pd nanoparticles by the deposition-precipitation method. The experimental results indicated that the benzyl alcohol conversion employing the rutile TiO₂-supported Au-Pd catalyst is higher than the conversion of anatase and brookite TiO₂-loaded Au-Pd catalysts. However, the Au-Pd/TiO₂-rutile displayed the lowest and highest selectivity toward benzaldehyde and toluene, respectively. ICP-AES, XRD, XPS, and TEM were conducted to characterize these catalysts. The corresponding experimental results revealed that the excellent performance of Au-Pd/TiO₂-rutile catalyst was attributed to both the smaller Au-Pd nanoparticle size distribution and the higher concentrations of O_α and Pd²⁺ species on the catalyst surface. In the recycle experiments, the Au-Pd/TiO₂-rutile catalyst displayed lower reaction stability compared with the Au-Pd/TiO₂-anatase and Au-Pd/TiO₂-brookite, which might be due to the coverage of larger amount of aldehyde products on the surface.

In Situ/Operando X-ray Spectroscopies for Advanced Investigation of Energy Materials

Issues related to energy and the environment have now become of central and crucial importance in our societies. Low-carbon green energy will have a critical role in a necessary third industrial revolution. To reduce global greenhouse gas emissions in response to globalization and increasingly stringent carbon emission policies, large scale green energy production technologies must be established worldwide. A new age of human demand for green energy is thus coming and scientists are focused on finding new functional efficient and low-cost materials to generate clean and sustainable energy. Improving the energy conversion, generation, and storage efficiency of energy materials has always been a daunting challenge. For many important energy material systems, such as nanostructured catalysts, artificial photosynthetic systems, smart energy saving materials, and energy storage devices, monitoring the atomic and electronic structures close to the interfacial region in a real working environment is of paramount importance. Designing a better-performing material without comprehending its fundamental properties such as chemical states, atomic and electronic structures and how they are altered close to the interfacial regions during the physical and chemical reactions involved in their applications is very challenging. Understanding, controlling and tuning the interfaces in energy conversion and storage materials requires in situ/operando characterization tools, of which synchrotron X-ray spectroscopies, which have several unique features, are very suitable ones. X-ray absorption spectroscopy can be used to elucidate the local unoccupied electronic structure in the conduction band, and X-ray emission spectroscopy can be used to characterize the occupied electronic structure in the valence band. The derived resonant inelastic X-ray scattering reveals inter- and/or intra-electric transitions (i.e. d-d, f-f excitation and charge-transfer excitation) that reflect intrinsic chemical and physical properties. Scanning transmission X-ray microscopy is a chemical mapping technique with elemental sensitivity and spatial selectivity, which can therefore yield information about chemical composition in various spatial regions. This unique characteristic makes the method effective for investigating interfacial phenomena (such as electron transport, interface formation/deformation, defects, doping etc.). In situ/operando approaches have made the probing and understanding of changes in the atomic and electronic structures of energy materials in an operational environment feasible. This article presents a perspective of the pioneering developments as well as the recent achievements in in situ/operando synchrotron X-ray spectroscopies for the advanced investigation of energy materials. Four major energy material systems are identified: energy storage, energy generation, energy conversion, and energy saving material systems. Selected representative investigations of each systems are showcased and discussed demonstrating that in situ/operando synchrotron X-ray spectroscopy is truly essential for unraveling better fundamental knowledge for mechanism understanding and efficiency optimization of existing and emerging energy material systems.

Multicomponent (Ce, Cu, Ni) oxides with cage and core-shell structures: tunable fabrication and enhanced CO oxidation activity

Solvothermal synthesis of Cu2O cubes from Cu(OAc)2 in ethanol provided templates for tunable formation of novel multicomponent composites: hollow CeO2-Cu2O (), core-shell NiO@Cu2O () and hollow CeO2-NiO-Cu2O (). Composites catalyze the oxidation of CO at a lower temperature than the parent Cu2O cubes.

Insights into the effects of surface properties of oxides on the catalytic activity of Pd for C-C coupling reactions

Understanding the interaction between Pd nanocatalysts and metal oxide supports for heterogeneous C-C coupling reactions is still ambiguous since many factors influence the catalytic behavior of Pd nanocatalysts. Herein, three porous nanorods of CeO2 with controllable surface properties were employed as supports for Pd nanocatalysts with similar dispersion, which avoided the impact of other factors including surface area, morphology and accessible active sites. It provides an ideal approach to probe synergetic catalytic behavior of metal nanoparticles on supports. The results obtained by studying three C-C coupling reactions (Ullman, Suzuki and Heck) indicate a strong correlation between the surface properties of supports and the catalytic activity of Pd nanocatalysts: supports with a strong basicity and a high concentration of oxygen vacancies result in a rich electron density of Pd and accelerate the first step of oxidative addition reaction for C-C coupling. The infrared spectroscopic study on ν[CO] of CO-treated catalysts and XPS analysis of the Pd(3d) core level provide strong evidence supporting the interaction of Pd/supports for C-C coupling reactions.

Selective Palladium-Catalysed Aerobic Oxidation of Alcohols

Palladium has a significant track record as a catalyst for a range of oxidation reactions and it has been explored for the selective oxidation of alcohols for many years. This chapter focuses on the two main types of aerobic Pd catalysts: heterogeneous and ligand-modulated systems. In the case of heterogeneous systems, the mechanistic understanding of these systems and the use of in situ and operando techniques to obtain this knowledge are discussed. The current state-of-the-art is also summarized in terms of catalytic performance and substrate scope for heterogeneous Pd-based catalysts. In terms of ligand-modulated systems, leading examples of molecular Pd(ii) catalysts which undergo direct O2 coupled turnover are highlighted. The catalyst performance for such catalysts is exemplified and mechanistic understanding for these molecular systems is discussed.

Impact of co-adsorbed oxygen on crotonaldehyde adsorption over gold nanoclusters: a computational study

Crotonaldehyde (2-butenal) adsorption over gold sub-nanometer particles, and the influence of co-adsorbed oxygen, has been systematically investigated by computational methods. Using density functional theory, the adsorption energetics of crotonaldehyde on bare and oxidised gold clusters (Au13, d = 0.8 nm) were determined as a function of oxygen coverage and coordination geometry. At low oxygen coverage, sites are available for which crotonaldehyde adsorption is enhanced relative to bare Au clusters by 10 kJ mol(-1). At higher oxygen coverage, crotonaldehyde is forced to adsorb in close proximity to oxygen weakening adsorption by up to 60 kJ mol(-1) relative to bare Au. Bonding geometries, density of states plots and Bader analysis, are used to elucidate crotonaldehyde bonding to gold nanoparticles in terms of partial electron transfer from Au to crotonaldehyde, and note that donation to gold from crotonaldehyde also becomes significant following metal oxidation. At high oxygen coverage we find that all molecular adsorption sites have a neighbouring, destabilising, oxygen adatom so that despite enhanced donation, crotonaldehyde adsorption is always weakened by steric interactions. For a larger cluster (Au38, d = 1.1 nm) crotonaldehyde adsorption is destabilized in this way even at a low oxygen coverage. These findings provide a quantitative framework to underpin the experimentally observed influence of oxygen on the selective oxidation of crotyl alcohol to crotonaldehyde over gold and gold-palladium alloys.

Catalysing sustainable fuel and chemical synthesis

Concerns over the economics of proven fossil fuel reserves, in concert with government and public acceptance of the anthropogenic origin of rising CO2 emissions and associated climate change from such combustible carbon, are driving academic and commercial research into new sustainable routes to fuel and chemicals. The quest for such sustainable resources to meet the demands of a rapidly rising global population represents one of this century's grand challenges. Here, we discuss catalytic solutions to the clean synthesis of biodiesel, the most readily implemented and low cost, alternative source of transportation fuels, and oxygenated organic molecules for the manufacture of fine and speciality chemicals to meet future societal demands.

N-heterocyclic carbene (NHC)-modulated Pd/Cu cocatalyzed three-component synthesis of 2,6-diarylquinolines

An efficient NHC-modulated Pd/Cu cocatalyzed three-component coupling reaction for the synthesis of 2,6-diarylquinolinesviaoxidation, cyclization and Suzuki reactions.

Tunable Pt nanocatalysts for the aerobic selox of cinnamyl alcohol

The selective aerobic oxidation of cinnamyl alcohol over Pt nanoparticles has been tuned via the use of mesoporous silica supports to control their dispersion and oxidation state. High area two-dimensional SBA-15, and three-dimensional, interconnected KIT-6 silica significantly enhance Pt dispersion, and thus surface PtO2 concentration, over that achievable via commercial low surface area silica. Selective oxidation activity scales with Pt dispersion in the order KIT-6 ≥ SBA-15 > SiO2, evidencing surface PtO2 as the active site for cinnamyl alcohol selox to cinnamaldehyde. Kinetic mapping has quantified key reaction pathways, and the importance of high O2 partial pressures for cinnamaldehyde production.