Surface Ti3+-Containing (blue) Titania: A Unique Photocatalyst with High Activity and Selectivity in Visible Light-Stimulated Selective Oxidation

Precursor- and waste-free synthesis of spark-ablated nanoparticles with enhanced photocatalytic activity and stability towards airborne organic pollutant degradation

Photocatalyst synthesis typically involves multiple steps, expensive precursors, and solvents. In contrast, spark ablation offers a simple process of electrical discharges in a gap between two electrodes made from a desirable material. This enables a precursor- and waste-free generation of pure metal oxide nanoparticles or mixtures of various compositions. This study presents a two-step method for the production of photocatalytic filters with deposited airborne MnOx, TiO2, and ZnO nanoparticles using spark ablation and calcination processes. The resulting MnOx and TiO2 filters demonstrated almost twice the activity with outstanding performance stability, as compared to sol-gel MnO2 and commercial TiO2. The introduced method is not only simple, precursor- and waste-free, and leads to superior performance for the case studied, but it also has future potential due to its versatility. It can easily produce mixed and doped materials with further improved properties, making it an interesting avenue for future research.

Defective TiO2 Nanotube Arrays for Efficient Photoelectrochemical Degradation of Organic Pollutants

Oxygen vacancies (OVs) are one of the most critical factors that enhance the electrical and catalytic characteristics of metal oxide-based photoelectrodes. In this work, a simple procedure was applied to prepare reduced TiO₂ nanotube arrays (NTAs) (TiO_2-x) via a one-step reduction method using NaBH₄. A series of characterization techniques were used to study the structural, optical, and electronic properties of TiO_2-x NTAs. X-ray photoelectron spectroscopy confirmed the presence of defects in TiO_2-x NTAs. Photoacoustic measurements were used to estimate the electron-trap density in the NTAs. Photoelectrochemical studies show that the photocurrent density of TiO_2-x NTAs was nearly 3 times higher than that of pristine TiO₂. It was found that increasing OVs in TiO₂ affects the surface recombination centers, enhances electrical conductivity, and improves charge transport. For the first time, a TiO_2-x photoanode was used in the photoelectrochemical (PEC) degradation of a textile dye (basic blue 41, B41) and ibuprofen (IBF) pharmaceutical using in situ generated reactive chlorine species (RCS). Liquid chromatography coupled with mass spectrometry was used to study the mechanisms for the degradation of B41 and IBF. Phytotoxicity tests of B41 and IBF solutions were performed using Lepidium sativum L. to evaluate the potential acute toxicity before and after the PEC treatment. The present work provides efficient PEC degradation of the B41 dye and IBF in the presence of RCS without generating harmful products.

Regulating the surface of anion-doped TiO2 nanorods by hydrogen annealing for superior photoelectrochemical water oxidation

Dedications to achieve the highly efficient metal oxide semiconductor for the photoelectrochemical water splitting system have been persisted to utilize the TiO₂ as the promising photoanode material. Herein, we report notable progress for nanostructured TiO₂ photoanodes using facile sequential one-pot hydrothermal synthesis and annealing in hydrogen. A photocurrent density of 3.04 mA·cm^-2 at 1.23 V vs. reversible hydrogen electrode was achieved in TiO₂ nanorod arrays annealed in hydrogen ambient, which is approximately 4.25 times higher than that of pristine TiO₂ annealed in ambient air. 79.2% of incident photon-to-current efficiency at 380 nm wavelength demonstrates the prominence of the material at the near-UV spectral range region and 100 h chronoamperometric test exhibits the stability of the photoanode. Detailed studies regarding crystallinity, bandgap, and elemental analysis provide the importance of the optimized annealing condition for the TiO₂-based photoanodes. Water contact angle measurement displays the effect of hydrogen annealing on the hydrophilicity of the material. This study clearly demonstrates the marked improvement using the optimized hydrogen annealing, providing the promising methodologies for eco-friendly mass production of water splitting photoelectrodes.

Defect Engineering of Pt/TiO2-x Photocatalysts via Reduction Treatment Assisted by Hydrogen Spillover

Defect engineering of metal oxides is a facile and promising strategy to improve their photocatalytic activity. In the present study, Pt/TiO_2-x was prepared by a reduction treatment assisted by hydrogen spillover to pure rutile, anatase, and brookite and was subsequently used for hydrogen production from an aqueous methanol solution. With increasing reduction temperature, the photocatalytic activity of the rutile Pt/TiO_2-x increased substantially, whereas the activity of anatase Pt/TiO_2-x decreased and that of brookite Pt/TiO_2-x was independent of the treatment temperature. Electron-spin resonance analysis revealed that rutile and brookite possess similar defect sites (Ti³⁺ and concomitant oxygen vacancy) after the reduction at 600 °C, whereas different resonance signals were observed for anatase after the reduction at 600 °C. During the reduction process, electrons donated from spillover hydrogen migrate between the conduction band and the inherent midgap states. This research demonstrates that the depth of the inherent midgap states, depending on the crystal phases, influences the generation of defects, which play a key role in the photocatalytic performance of Pt/TiO_2-x.

Defective Black TiO2: Effects of Annealing Atmospheres and Urea Addition on the Properties and Photocatalytic Activities

A series of black TiO₂ with and without the addition of urea were successfully prepared using a simple one-step synthetic method by calcination under different atmospheres (vacuum, He, or N₂). The physicochemical, optical, and light-induced charge transfer properties of the as-prepared samples were characterized by various techniques. It was found that a vacuum atmosphere was more beneficial for the formation of oxygen vacancies (OVs) than the inert gases (He and N₂) and the addition of urea-inhibited OVs formation. The samples annealed in the vacuum condition exhibited better visible-light adsorption abilities, narrower bandgaps, higher photo-induced charge separation efficiency, and lower recombination rates. Hydroxyl radicals (·OH) were the dominant oxidative species in the samples annealed under a vacuum. Finally, the samples annealed under vacuum conditions displayed higher photocatalytic activity for methylene blue (MB) degradation than the samples annealed under He or N₂. Based on the above, this study provides new insights into the effects of annealing atmospheres and urea addition on the properties of black TiO₂.

Probing the formation and optical properties of Ti3+–TiO2 with (001) exposed crystal facet by ethanol-assisted fluorination

(001)-faceted TiO₂ with Ti³⁺ defects that are exclusively embedded in the bulk lattice near the surface was synthesized.

Photocatalytic Overall Water Splitting by SrTiO3 with Surface Oxygen Vacancies

Strontium Titanate has a typical perovskite structure with advantages of low cost and photochemical stability. However, the wide bandgap and rapid recombination of electrons and holes limited its application in photocatalysis. In this work, a SrTiO3 material with surface oxygen vacancies was synthesized via carbon reduction under a high temperature. It was successfully applied for photocatalytic overall water splitting to produce clean hydrogen energy under visible light irradiation without any sacrificial reagent for the first time. The photocatalytic overall water splitting ability of the as-prepared SrTiO3-C950 is attributed to the surface oxygen vacancies that can make suitable energy levels for visible light response, improving the separation and transfer efficiency of photogenerated carriers.

Grey Rutile TiO2 with Long-Term Photocatalytic Activity Synthesized Via Two-Step Calcination

Colored titanium oxides are usually unstable in the atmosphere. Herein, a gray rutile titanium dioxide is synthesized by two-step calcination successively in a high-temperature reduction atmosphere and in a lower-temperature air atmosphere. The as-synthesized gray rutile TiO₂ exhibits higher photocatalytic activity than that of white rutile TiO₂ and shows high chemical stability. This is attributed to interior oxygen vacancies, which can improve the separation and transmission efficiency of the photogenerated carriers. Most notably, a formed surface passivation layer will protect the interior oxygen vacancies and provide long-term photocatalytic activity.

Effects of the Structure of TiO2 Nanotube Arrays on Its Catalytic Activity for Microbial Fuel Cell

To enhance the microbial fuel cell (MFC) for wastewater treatment and chemical oxygen demand degradation, TiO2 nanotubes arrays (TNA) are successfully synthesized on Ti foil substrate by the anodization process in HF and NH4F solution, respectively (hereafter, denoted as TNA-HF and TNA-NF). The differences between the two kinds of TNA are revealed based on their morphologies and spectroscopic characterizations. It should be highlighted that 3D TNA-NF with an appropriate dimension can make a positive contribution to the high photocatalytic activity. In comparison with the TNA-HF, the 3D TNA-NF sample exhibits a significant enhancement in current generation as the MFC anode. In particular, the TNA-NF performs nearly 1.23 times higher than the TNA-HF, and near twofold higher than the carbon felt. It is found that the two kinds of TiO2-based anodes have different conductivities and corrosion potentials, which are responsible for the difference in their current generation performances. Based on the experimental results, excellent stability, reliability, and low cost, TNA-NF can be considered a promising and scalable MFC bioanode material.

Switchable Intrinsic Defect Chemistry of Titania for Catalytic Applications

The energy crisis is one of the most serious issue that we confront today. Among different strategies to gain access to reliable fuel, the production of hydrogen fuel through the water-splitting reaction has emerged as the most viable alternative. Specifically, the studies on defect-rich TiO2 materials have been proved that it can perform as an efficient catalyst for electrocatalytic and photocatalytic water-splitting reactions. In this invited review, we have included a general and critical discussion on the background of titanium sub-oxides structure, defect chemistries and the consequent disorder arising in defect-rich Titania and their applications towards water-splitting reactions. We have particularly emphasized the origin of the catalytic activity in Titania-based material and its effects on the structural, optical and electronic behavior. This review article also summarizes studies on challenging issues on defect-rich Titania and new possible directions for the development of an efficient catalyst with improved catalytic performance.

Bifunctional, Moth-Eye-Like Nanostructured Black Titania Nanocomposites for Solar-Driven Clean Water Generation

Solar steam generation and photocatalytic degradation have been regarded as the most promising techniques to address clean water scarcity issues. Although enormous efforts have been devoted to exploring high-efficiency clean water generation, many challenges still remain in terms of single decontamination function, relatively low efficiency, and inability to practical application. Herein, we first report the bioinspired fabrication of black titania (BT) nanocomposites with moth-eye-like nanostructures on carbon cloth for solar-driven clean water generation through solar steam generation and photocatalytic degradation. The moth-eye-like BT nanoarrays can largely prolong the effective propagation path of absorbing light and enhance the scattering of light, thereby exhibiting outstanding light absorption of 96% in the full spectrum. Such hierarchical-nanostructured BT nanocomposites not only impressively achieve solar steam efficiency of 94% under a simulated light of 1 kW m^-2 but also show the prominent performance of desalination and steam generation in real life condition. In addition, 96% of rhodamine B is degraded using BT nanocomposites as a photocatalyst in 100 min. The moth-eye-like bioinspired designing concept and bifunctional applications in this study may open up a new strategy for maximizing solar energy utilization and clean water generation.

Coordinative integration of copper (II) and iron (II) phthalocyanine into amidoximated PAN fiber for enhanced photocatalytic activity under visible light irradiation

Metal phthalocyanine (MPc) complexes hold great promise for photocatalysis applications because of their high visible light harvesting efficiency and semiconductive properties. However, the effective development requires the suppression of their rapid charge recombination. Transition metal ions can act as electron traps to enhance the charge separation of semiconductors, but challenges still remain for bimetallic co-catalysis of MPc due to the difficulties in the combination between them. Herein, we proposed a new approach to enable the assisted metal ions to interact with MPc through fibrous support, constructing a novel bimetallic photocatalyst via simultaneously immobilizing iron(II) phthalocyanine (FePc) and Cu(II) onto the surface of amidoximated polyacrylonitrile (PAN) fiber. Taking the photodegradation of organic dyes as model reactions, this bimetallic catalyst achieves much higher photoactivity than that of the monometallic FePc catalyst, and effectively converts surface H₂O₂ into hydroxyl radicals rather than superoxide radicals and high-valent metal-oxo species. The Cu(II) not only enables the transfer of photoexcited electrons from FePc, but also promotes the running of Fe(II)/Fe(III) cycle to boost reactive radicals generation through H₂O₂ activation. The strategy of coupling Cu(II) with MPc through fibrous support provides a facile and promising solution for the advancement of MPc-based photocatalysis via visible light energy.

Defect-mediated electron–hole separation in semiconductor photocatalysis

This review summarizes the inherent functionality of bulk, surface and interface defects, and their contributions towards mediating electron–hole separation in semiconductor photocatalysis.

Design and mechanism of core-shell TiO2 nanoparticles as a high-performance photothermal agent

Photothermal agents (PTAs) with high biocompatibility and therapeutic efficacy have become particularly fascinating, however, knowledge of their photothermal performance is rather limited. Herein, rationally designed core-shell TiO₂ nanoparticles have been fabricated using a mild hydrogenation method, where NaBH₄ was used as the H₂ source. The resultant TiO₂ possesses strong optical absorption in the NIR region and remarkable photothermal conversion capability and stability, leading to a high inhibition rate on cancer cells. In particular, its photothermal conversion efficiency is as high as 55.2%, which is 204% that of the fully hydrogenated amorphous TiO₂. More importantly, the underlying mechanism is proposed. It is revealed that while the oxygen vacancies induced by the hydrogenation can introduce defect levels in the band gap and enhance the optical absorption, the superfluous oxygen vacancies and defects reduce the photothermal conversion capability and thermal conductivity to a large extent. Controlling the hydrogenation degree and maintaining a certain extent of crystallization are, therefore, crucial to the photothermal properties. This new understanding of the photothermal conversion mechanism may have provided a fresh route to design and optimize PTAs and inspire considerable interest to turn a large variety of semiconductor metal oxides into competent PTAs by appropriate hydrogenation.

Engineering defects and photocatalytic activity of TiO2 nanoparticles by thermal treatments in NH3 and subsequent surface chemical etchings

TiO₂ nanoparticles with N dopants were prepared by thermal treatments in NH₃ and their surface defects were controlled by post chemical etching in HF to find out the influence of the N dopants on photoactivity. The effect of N-doping is found to enhance the photoactivity of TiO₂, but is strongly dependent on the degree of N-doping and the detailed distribution of nitrogen species within the TiO₂ nanoparticles. In particular, the N-rich layers formed near the surface are found to contribute to the enhanced photoactivity due to the reduced band gap. But, the increase in the N concentration may induce defects that act as recombination centers and reduce the photoactivity. Subsequent chemical etching in HF confirms the existence of the substitutional N species near the surface from the observation of paramagnetic N species. But, prolonged HF treatments are found to decrease the photoactivity primarily due to the removal of the N-rich surface layers that are responsible for the enhanced photoactivity. Our results show that the photoactivity of N-doped TiO₂ is strongly influenced by the type and the density of the N dopants induced by the N doping.

Deposition of Visible Light-Active C-Doped Titania Films via Magnetron Sputtering Using CO₂ as a Source of Carbon

Doping of titanium dioxide with p-block elements is typically described as an efficient pathway for the enhancement of photocatalytic activity. However, the properties of the doped titania films depend greatly on the production method, source of doping, type of substrate, etc. The present work describes the use of pulsed direct current (pDC) magnetron sputtering for the deposition of carbon-doped titania coatings, using CO₂ as the source of carbon; ratios of O₂/CO₂ were varied through variations of CO₂ flow rates and oxygen flow control setpoints. Additionally, undoped Titanium dioxide (TiO₂) coatings were prepared under identical deposition conditions for comparison purposes. Coatings were post-deposition annealed at 873 K and analysed with scanning electron microscopy (SEM), X-ray diffreaction (XRD), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). The photocatalytic properties of the thin films were evaluated under ultraviolet (UV) and visible light irradiation using methylene blue and stearic acid decomposition tests. Photoinduced hydrophilicity was assessed through measurements of the water contact angle under UV and visible light irradiation. It was found that, though C-doping resulted in improved dye degradation compared to undoped TiO₂, the UV-induced photoactivity of Carbon-doped (C-doped) photocatalysts was lower for both model pollutants used.

Anatase TiO2 Mesocrystals: Green Synthesis, In Situ Conversion to Porous Single Crystals, and Self-Doping Ti3+ for Enhanced Visible Light Driven Photocatalytic Removal of NO

Mesocrystals are of great interest for a wide range of applications owing to their unique structural features and properties. The realization of well-defined metal oxide mesocrystals through a facile and green synthetic approach still remains a great challenge. Here, a novel synthesis strategy is reported for the production of spindle-shaped anatase TiO₂ mesocrystals with a single-crystal-like structure, which was simply achieved through the one-step hydrolysis reaction of TiCl₃ in the green and recyclable media polyethylene glycol (PEG-400) without any additives. Such anatase mesocrystals were constructed from small nanocrystal subunits (≈1.5-4.5 nm in diameter) and formed through oriented aggregation of the nanocrystals pre-formed in the reaction system. Owing to their novel structural characteristics, the as-synthesized anatase mesocrystals could be easily fused in situ into porous single crystals by annealing in air. More significantly, after being annealed in vacuum, Ti³⁺ sites could be easily induced in the anatase crystal lattice, resulting in the formation of Ti³⁺ self-doped anatase mesocrystals. The thus-transformed mesocrystals exhibited enhanced visible light activity towards the photocatalytic oxidation of nitric oxide (NO) to NO₃^- , which could be largely attributed to their intrinsic Ti³⁺ self-doped nature, as well as high crystallinity and high porosity of the mesocrystalline architecture.

Preparation of annular TiO2 nanoparticles constructed by high-energy surfaces and enhanced visible-light photocatalytic activity

Annular TiO₂ nanoparticles were synthesized through a combined solvothermal and etching process.

Charge Transfer Reductive in situ Doping of Mesoporous TiO2 Photoelectrodes - Impact of Electrolyte Composition and Film Morphology

Some material properties depend not only on synthesis and processing parameters, but may furthermore significantly change during operation. This is particularly true for high surface area materials. We used a combined electrochemical and spectroscopic approach to follow the changes of the photoelectrocatalytic activity and of the electronic semiconductor properties of mesoporous TiO₂ films upon charge transfer reductive doping. Shallow donors (i.e. electron/proton pairs) were introduced into the semiconductor by the application of an external potential or, alternatively, by band gap excitation at open circuit conditions. In the latter case the effective open circuit doping potential depends critically on electrolyte composition (e.g. the presence of electron or hole acceptors). Transient charge accumulation (electrons and protons) in nanoparticle electrodes results in a photocurrent enhancement which is attributed to the deactivation of recombination centers. In nanotube electrodes the formation of a space charge layer results in an additional decrease of charge recombination at positive potentials. Doping is transient in nanoparticle films, but turns out to be stable for nanotube arrays.

Reduced TiO2-Graphene Oxide Heterostructure As Broad Spectrum-Driven Efficient Water-Splitting Photocatalysts

The reduced TiO2-graphene oxide heterostructure as an alternative broad spectrum-driven efficient water splitting photocatalyst has become a really interesting topic, however, its syntheses has many flaws, e.g., tedious experimental steps, time-consuming, small scale production, and requirement of various additives, for example, hydrazine hydrate is widely used as reductant to the reduction of graphene oxide, which is high toxicity and easy to cause the second pollution. For these issues, herein, we reported the synthesis of the reduced TiO2-graphene oxide heterostructure by a facile chemical reduction agent-free one-step laser ablation in liquid (LAL) method, which achieves extended optical response range from ultraviolet to visible and composites TiO(2-x) (reduced TiO2) nanoparticle and graphene oxide for promoting charge conducting. 30.64% Ti(3+) content in the reduced TiO2 nanoparticles induces the electronic reconstruction of TiO2, which results in 0.87 eV decrease of the band gap for the visible light absorption. TiO(2-x)-graphene oxide heterostructure achieved drastically increased photocatalytic H2 production rate, up to 23 times with respect to the blank experiment. Furthermore, a maximum H2 production rate was measured to be 16 mmol/h/g using Pt as a cocatalyst under the simulated sunlight irradiation (AM 1.5G, 135 mW/cm(2)), the quantum efficiencies were measured to be 5.15% for wavelength λ = 365 ± 10 nm and 1.84% for λ = 405 ± 10 nm, and overall solar energy conversion efficiency was measured to be 14.3%. These findings provided new insights into the broad applicability of this methodology for accessing fascinate photocatalysts.

Photocatalytic reduction of carbon dioxide using iodine-doped titanium dioxide with high exposed {001} facets under visible light

Iodine-doped titanium dioxide nanosheets with high exposed {001} facets (IFTO) were synthesized by a two-step hydrothermal treatment followed by calcination at 350 °C.

Fabrication of TiO2 nanosheets via Ti3+ doping and Ag3PO4 QD sensitization for highly efficient visible-light photocatalysis

Ag₃PO₄ QDs sensitized and Ti³⁺-doped TiO₂ nanosheets were fabricated, and exhibit high charge-separation efficiency and high photocatalytic activity.

Electrochemically self-doped hierarchical TiO2 nanotube arrays for enhanced visible-light photoelectrochemical performance: an experimental and computational study

A two-step electrochemical anodization method was used to prepare typical hierarchical top-ring/bottom-tube TiO₂ nanotube arrays (TNTAs).

Controllable Synthesis and Tunable Photocatalytic Properties of Ti(3+)-doped TiO2

Photocatalysts show great potential in environmental remediation and water splitting using either artificial or natural light. Titanium dioxide (TiO2)-based photocatalysts are studied most frequently because they are stable, non-toxic, readily available, and highly efficient. However, the relatively wide band gap of TiO2 significantly limits its use under visible light or solar light. We herein report a facile route for controllable synthesis of Ti(3+)-doped TiO2 with tunable photocatalytic properties using a hydrothermal method with varying amounts of reductant, i.e., sodium borohydride (NaBH4). The resulting TiO2 showed color changes from light yellow, light grey, to dark grey with the increasing amount of NaBH4. The present method can controllably and effectively reduce Ti(4+) on the surface of TiO2 and induce partial transformation of anatase TiO2 to rutile TiO2, with the evolution of nanoparticles into hierarchical structures attributable to a high pressure and strong alkali environment in the synthesis atmosphere; in this way, the photocatalytic activity of Ti(3+)-doped TiO2 under visible-light can be tuned. The as-developed strategy may open up a new avenue for designing and functionalizing TiO2 materials for enhancing visible light absorption, narrowing band gap, and improving photocatalytic activity.

One-dimensional hybrid nanostructures for heterogeneous photocatalysis and photoelectrocatalysis

Semiconductor-based photocatalysis and photoelectrocatalysis have received considerable attention as alternative approaches for solar energy harvesting and storage. The photocatalytic or photoelectrocatalytic performance of a semiconductor is closely related to the design of the semiconductor at the nanoscale. Among various nanostructures, one-dimensional (1D) nanostructured photocatalysts and photoelectrodes have attracted increasing interest owing to their unique optical, structural, and electronic advantages. In this article, a comprehensive review of the current research efforts towards the development of 1D semiconductor nanomaterials for heterogeneous photocatalysis and photoelectrocatalysis is provided and, in particular, a discussion of how to overcome the challenges for achieving full potential of 1D nanostructures is presented. It is anticipated that this review will afford enriched information on the rational exploration of the structural and electronic properties of 1D semiconductor nanostructures for achieving more efficient 1D nanostructure-based photocatalysts and photoelectrodes for high-efficiency solar energy conversion.

A facile solution-based approach to a photocatalytic active branched one-dimensional TiO2 array

Branched one-dimensional TiO₂ array with enhanced photocatalytic activity was fabricated via a facile solution-based strategy.

Molten salt assisted synthesis of black titania hexagonal nanosheets with tuneable phase composition and morphology

A facile high yield molten salt route to fabricate black titania hexagonal nanosheets under atmospheric pressure and low temperature.

A photochromic nano-system via self-recovery for stable photocatalytic hydrogen evolution by optimizing TiO2 surface energy

AgBr photochromic self-recovery system was introduced into TiO₂ to repeatedly optimize its surface energy by the repeating Br₂ adsorption.

Quick and facile preparation of visible light-driven TiO2 photocatalyst with high absorption and photocatalytic activity

Self-doping TiO₂ has recently attracted considerable attention for its high photocatalytic activity under visible-light irradiation. However, the literature reported synthetic methods until now were very time-consuming. In this study, we establish a quick and facile method for obtaining self-doping TiO₂ with the use of directly treated commercial P25 at a desired temperature for only 5 min through spark plasma sintering technology. With the using of this method, the modified P25 samples exhibit significantly high photoelectric and photocatalytic performance. Furthermore, the sample prepared at 600°C exhibits the optimum catalytic activity. The photodegradation and H₂ evolution rates of this samples are significantly higher than those of unmodified P25 sample under visible-light irradiation. The physical origin of the visible-light absorption for the modified P25 samples is investigated in detail according to their structural, optical, and electronic properties. This work will provide a quick and facile method for the large-scale synthesis of visible-light driven photocatalyst for practical applications.