Earth-Abundant Copper-Based Bifunctional Electrocatalyst for Both Catalytic Hydrogen Production and Water Oxidation

Cation-Triggered Growth of Nanowires for Enhanced Oxygen Evolution Reaction

The oxygen evolution reaction (OER), which occurs in a variety of energy-related devices, necessitates optimization of the reaction pathways for efficient and scalable deployment. Nevertheless, fully harnessing the advanced structure of synthetic electrocatalysts remains a significant challenge due to the inevitable surface reconstruction process during OER. Here we present an efficient and flexible method to control the surface reconstruction process by engineering an electrolyte containing trace Co2+ cation. This controllable reconstruction process enhances fast charge transfer, facilitates electroactive species transport, and exposes the inner active site, significantly improving the OER kinetics. An impressive 60% increase in current density at an applied potential of 2.2 V (vs RHE) confirms its remarkable contribution to the performance. The identification of cation-triggered reconstruction for the formation of a well-defined surface provides a novel insight into understanding electrolyte engineering and offers a viable pathway to address activity and stable concerns in electrocatalysts.

Electrocatalytic Hydrogen Evolution of Immobilized Copper Complex on Carbonaceous Materials: From Neutral Water to Seawater

Electrochemical hydrogen evolution reaction (HER) is an appealing strategy to utilize renewable electricity to produce green H2. Moreover, use of neutral-pH electrolyte such as water and seawater for the HER has long been desired for eco-friendly energy production that aligns with net zero emission goal. Herein, new heterogeneous catalysts were developed by dispersing an HER-active copper complex containing N4-Schiff base macrocycle (CuL) on carbonaceous materials, i. e. multi-walled carbon nanotube (CNT) and graphene oxide (GO), via non-covalent interaction and investigated their HER performance. It was found that CuL/GO exhibited higher HER activity than CuL/CNT, possibly due to its significantly larger amount of CuL immobilized onto GO. In addition, CuL/GO showed satisfactory HER performance in a neutral (pH 7) NaCl electrolyte solution. Notably, the performances of CuL/GO were boosted up when performed in natural seawater sample with the faradaic efficiency of 70 % and 3 times higher amount of H2 at -0.6 V vs reversible hydrogen electrode (RHE), in comparison to the HER in a NaCl electrolyte. Furthermore, it possessed a low overpotential of 139 mV at -10 mA/cm2. This demonstrated the potential use of CuL/GO as an effective HER catalyst in seawater for further sustainable development.

Deconstructive annulation mediated one-pot synthesis of xanthene derivatives

Direct conversion of naphthoxazines to diverse xanthene derivatives was achieved under one-pot operation through deconstructive annulation methodology. Sequential oxidative C(sp3)-O/C(sp3)-N cleavage followed by intramolecular/intermolecular annulation reaction was carried out under aerobic reaction conditions. Mechanistic analyses performed on the substrate revealed that the C(sp3)-O bond cleavage supersedes the C(sp3)-N bond scission. The in situ generated Betti base intermediate through the C(sp3)-O cleavage was successfully isolated. Based on a molecular docking investigation, the intermolecular annulated products demonstrated good α-glucosidase inhibitory properties.

Highly Uniform Nanodiamond-Graphene Composites Microspheres for Electrocatalytic Hydrogen Evolution

To progress the clean hydrogen-gas-based energy economy, there is a demand for cost-effective, highly efficient catalysts to facilitate the hydrogen evolution reaction process (HER). Due to the amazing catalytic capabilities of two-dimensional materials, extensive research has been done on these structures. However, most of the described syntheses take a lot of time, are challenging, and are ineffective. The present work demonstrates the performance of the recently reported nanodiamond/graphene composite microsphere ND-GCSs as a catalyst for HER. These spheres were produced via the microwave-irradiation approach. A modified process was adopted to improve the particle size uniformity and yield. The prepared composite spheres showed very interesting catalytic activity for the HER when assembled on a screen-printed carbon electrode. The prepared ND-GCSs@SPCE showed a significant shift of the onset potential to ca. -450 mV and a small Tafel slope value of ca. 85 mV/decade. The electron transfer was drastically enhanced with a tremendous decrease in charge transfer resistance to ca. 265 Ω. The electrocatalyst showed excellent long-term stability for the HER application. Additionally, this novel composite structure might be beneficial for diverse applications including batteries, supercapacitors, catalyst supports, and more.

Copper-based electrocatalyst for hydrogen evolution in water

In aqueous pH 7 phosphate buffer, during controlled potential electrolysis (CPE) at -1.10 V vs. Ag|AgCl the literature square planar copper complex, [CuIILEt]BF4 (1), forms a heterogeneous deposit on the glassy carbon working electrode (GCWE) that is a stable and effective hydrogen evolution reaction (HER) electrocatalyst. Specifically, CPE for 20 hours using a small GCWE (A = 0.071 cm2) gave a turnover number (TON) of 364, with ongoing activity. During CPE the brownish-yellow colour of the working solution fades, and a deposit is observed on the small GCWE. Repeating this CPE experiment in a larger cell with a larger GCWE (A = 2.7 cm2), connected to a gas chromatograph, resulted in a TON of 2628 after 2.6 days, with FE = 93%, and with activity ongoing. After this CPE, the working solution had faded to nearly colourless, and visual inspection of the large GCWE showed a material had deposited on the surface. In a 'rinse and repeat test', this heterogeneous deposit was used for further CPE, in a freshly prepared working solution minus fresh catalyst, which resulted in similar ongoing HER activity to before, consistent with the surface deposited material being the active HER catalyst. EDS, PXRD and SEM analysis of this deposit shows that copper and oxygen are the main components present, most likely comprising copper and copper(I) oxide ((Cu2O)n) formed from 1. The use of 1 leads to a deposit that is more catalytically active than that formed when starting with a simple copper salt (control), likely due to it forming a more robustly attached deposit, which also enables the observed long-lived catalytic activity.

Recent Advances in Electrocatalytic Hydrogenation Reactions on Copper-Based Catalysts

Hydrogenation reactions play a critical role in the synthesis of value-added products within the chemical industry. Electrocatalytic hydrogenation (ECH) using water as the hydrogen source has emerged as an alternative to conventional thermocatalytic processes for sustainable and decentralized chemical synthesis under mild conditions. Among the various ECH catalysts, copper-based (Cu-based) nanomaterials are promising candidates due to their earth-abundance, unique electronic structure, versatility, and high activity/selectivity. Herein, recent advances in the application of Cu-based catalysts in ECH reactions for the upgrading of valuable chemicals are systematically analyzed. The unique properties of Cu-based catalysts in ECH are initially introduced, followed by design strategies to enhance their activity and selectivity. Then, typical ECH reactions on Cu-based catalysts are presented in detail, including carbon dioxide reduction for multicarbon generation, alkyne-to-alkene conversion, selective aldehyde conversion, ammonia production from nitrogen-containing substances, and amine production from organic nitrogen compounds. In these catalysts, the role of catalyst composition and nanostructures toward different products is focused. The co-hydrogenation of two substrates (e.g., CO2 and NOx n, SO3 2-, etc.) via C─N, C─S, and C─C cross-coupling reactions are also highlighted. Finally, the critical issues and future perspectives of Cu-catalyzed ECH are proposed to accelerate the rational development of next-generation catalysts.

Diffusion-Mediated Morphological Transformation in Bifunctional Mn2O3/CuO-(VO)3(PO4)2·6H2O for Enhanced Electrochemical Water Splitting

A strategical approach for morphological transformation and heterojunction formation was utilized to suppress the shortcomings of uni-metal oxide electrocatalysts and enhance their bifunctionality. In situ generation of copper oxide (CuO) over the surface of manganese oxide (Mn₂O₃) resulted in a morphological transformation from solid spheres to hollow spherical structures due to the ion-exchange diffusion (Kirkendall effect) of Cu ions into Mn₂O₃ particles. This hollowness resulted in the advancement of the bifunctional electrocatalytic behavior of Mn₂O₃/CuO (overpotential (η₁₀) of 280 mV for an OER and 310 mV for an HER at a current density of 10 mA/cm²) by virtue of increased exposed surface active sites aiding the adsorption of water molecules on the surface. The increased electrochemical active surface area (ECSA/C_dl = 34 mF/cm²) and reduced charge transfer resistance resulted in the formation of Mn₂O₃/CuO hollow spheres to achieve an approximately threefold enhancement in the turnover frequency (TOF) compared to the bare Mn₂O₃. The electrocatalytic efficiency of Mn₂O₃/CuO was further enhanced by virtue of the faster charge transfer coefficient of two-dimensional (2D) vanadyl phosphate hexahydrate (VOP) sheets deposited over its surface. This boosted the overall water splitting with attained overpotential (η₁₀) values of 190 and 220 mV with Tafel slopes of 60 and 105 mV/decade for an OER and HER, respectively. The morphological transformation and formation of an n-p heterojunction between Mn₂O₃ and CuO based on their work function (φ) values evaluated from the density functional theory (DFT) calculation and the effect of the VOP overlayer for faster reaction kinetics at the electrolyte interface resulted in an ∼10-fold increment in TOF values compared to the bare counterpart.

Fabrication and Characterization of the Broccoli-like Structured CuO Thin Films Synthesized by a Facile Hydrothermal Method and Its Photoelectrochemical Water Splitting Application

CuO thin films with broccoli-like structure were prepared using a facile hydrothermal method to construct photocathodes for water-splitting application. The morphological, structural, and optical properties of thin films were characterized and measured using several techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and ultraviolet-visible spectroscopy (UV-Vis). The thickness, structure, and morphology of CuO thin films can be controlled by varying the precursor concentration (Cp) and reaction temperature (Tr), which are also discussed. Moreover, the electrical properties of CuO thin films were also measured in the three-electrode system. The photocurrent density of photocathodes, when synthesized by a 0.5 M solution at 150 °C for 12 h, was 0.5 mA/cm2 at −0.6 V vs. Ag/AgCl, which is 1.8 times higher than that of photocathodes synthesized in a 0.1 M solution at 100 °C with the same reaction time. In addition, increasing the reaction temperature and precursor concentration aided in the enhancement of the IPCE and APCE values, which peaked at a wavelength range of 330–400 nm.

A General N-alkylation Platform via Copper Metallaphotoredox and Silyl Radical Activation of Alkyl Halides

The catalytic union of amides, sulfonamides, anilines, imines or N-heterocycles with a broad spectrum of electronically and sterically diverse alkyl bromides has been achieved via a visible light-induced metallaphotoredox platform. The use of a halogen abstraction-radical capture (HARC) mechanism allows for room temperature coupling of C(sp³ )-bromides using simple Cu(II) salts, effectively bypassing the prohibitively high barriers typically associated with thermally-induced S_N2 or S_N1 N-alkylation. This regio- and chemoselective protocol is compatible with >10 classes of medicinally-relevant N-nucleophiles, including established pharmaceutical agents, in addition to structurally diverse primary, secondary and tertiary alkyl bromides. Furthermore, the capacity of HARC methodologies to engage conventionally inert coupling partners is highlighted via the union of N-nucleophiles with cyclopropyl bromides and unactivated alkyl chlorides, substrates that are incompatible with nucleophilic substitution pathways. Preliminary mechanistic experiments validate the dual catalytic, open-shell nature of this platform, which enables reactivity previously unattainable in traditional halide-based N-alkylation systems.

Ligand Radical Mediated Water Oxidation by a Family of Copper o-Phenylene Bis-oxamidate Complexes

Understanding the reactivity landscape for the activation of water until the formation of the O-O bond and O₂ release in molecular chemistry is a decisive step in guiding the elaboration of cost-effective catalysts for the oxygen-evolving reaction (OER). Copper(II) complexes have recently caught the attention of chemists as catalysts for the 4e^-/4H⁺ water oxidation process. While a copper(IV) intermediate has been proposed as the reactive intermediate species, no spectroscopic signature has been reported so far. Copper(III) ligand radical species have also been formulated and supported by theoretical studies. We found, herein, that the reactivity sequence for the water oxidation with a family of Copper(II) o-phenylene bis-oxamidate complexes is a function of the substitution pattern on the periphery of the aromatic ring. In-situ EPR, FTIR, and rR spectroelectrochemical studies helped to sequence the elementary electrochemical and chemical events leading toward the O₂ formation selectively at the copper center. EPR and FTIR spectroelectrochemistry suggests that ligand-centered oxidations are preferred over metal-centered oxidations. rR spectroelectrochemical study revealed the accumulation of a bis-imine bound copper(II) superoxide species, as the reactive intermediate, under catalytic turnover, which provides the evidence for the O-O bond formation during OER.

Amine-functionalized multi-walled carbon nanotubes (EDA-MWCNTs) for electrochemical water splitting reactions

A study on the in situ decoration of ethylenediamine (EDA) on acid functionalized multi-walled carbon nanotubes (O-MWCNTs) for overall water splitting reactions at all pH as an efficient and inexpensive metal-free multifunctional electrocatalyst.

A monodispersed CuPt alloy: synthesis and its superior catalytic performance in the hydrogen evolution reaction over a full pH range

The high cost and low stability of electrocatalysts are the major challenges for the commercialization of hydrogen generation in water. In this study, we demonstrated a one-pot synthesis of a monodispersed CuPt alloy with the diameter range of 20–30 nm by a hydrothermal method. Benefiting from the more available active sites and preferable d-band structure, the CuPt alloy exhibited a superior catalytic performance than pure Pt nanoparticles (Pt NPs) in the hydrogen evolution reaction (HER). In acidic media, the CuPt alloy achieved a low overpotential of 39 mV at a current density of 10 mA cm⁻² for HER, which was by 22 mV lower than that for pure Pt NPs. In a neutral solution, the stability of the CuPt alloy is ca. 100-fold as compared to pure Pt NPs. Accounting by the dissolution of Cu in the alloy phase, the performance of the CuPt alloy was elevated after yielding hydrogen for 1.2 × 10⁵ s in alkaline media. The superior catalytic activity can also be applied in other applications. In the reduction of 4-nitro-phenol (4-NP), the CuPt alloy showed 12.84-fold catalytic activity higher than pure Pt NPs. This study designed a low-cost electrocatalyst with an efficient and durable catalytic performance for HER over the full pH range, which provides an environmentally friendly strategy to cope with the challenges of hydrogen generation.

An effective approach to achieve the low cost and high stability of electro-catalysts for HER.

Reactivity and Mechanism of Photo- and Electrocatalytic Hydrogen Evolution by a Diimine Copper(I) Complex

The tetrahedral copper(I) diimine complex [Cu(pq)2]BF4 displays high photocatalytic activity for the H2 evolution reaction with a turnover number of 3564, thus representing the first type of a Cu(I) quinoxaline complex capable of catalyzing proton reduction. Electrochemical experiments indicate that molecular mechanisms prevail and DFT calculations provide in-depth insight into the catalytic pathway, suggesting that the coordinating nitrogens play crucial roles in proton exchange and hydrogen formation.

Nanostructured copper molybdates as promising bifunctional electrocatalysts for overall water splitting and CO2 reduction

Overall water splitting and CO₂ reduction are two very important reactions from the environmental viewpoint. The former produces hydrogen as a clean fuel and the latter decreases the amount of CO₂ emissions and thus reduces greenhouse effects. Here, we prepare two types of copper molybdate, CuMoO₄ and Cu₃Mo₂O₉, and electrochemically investigate them for water splitting and CO₂ reduction. Our findings show that Cu₃Mo₂O₉ is a better electrocatalyst for full water splitting compared to CuMoO₄. It provides overpotentials, which are smaller than the overpotentials of CuMoO₄ by around 0.14 V at a current density of 1 mA cm⁻² and 0.10 V at −0.4 mA cm⁻², for water oxidation and hydrogen evolution reactions, respectively. However, CuMoO₄ adsorbs CO₂ and the reduced intermediates/products more strongly than Cu₃Mo₂O₉. Such different behaviors of these electrocatalysts can be attributed to their different unit cells.

Comparing overall water splitting on the surface two types of copper molybdate.

2D MOFs with Ni(II), Cu(II), and Co(II) as Efficient Oxygen Evolution Electrocatalysts: Rationalization of Catalytic Performance vs Structure of the MOFs and Potential of the Redox Couples

Earth-abundant transition-metal-based metal-organic frameworks (MOFs) are of immense interest for the development of efficient and durable heterogeneous water splitting electrocatalysts. This repot explores the design of two-dimensional (2D) MOFs with redox-active metal centers (Ni(II), Co(II), and Cu(II)) containing two types of electron-rich linkers such as bis(5-azabenzimidazole), linear L₁ and angular L₂, and aromatic dicarboxylates. The electron-rich linkers are considered to stabilize the higher oxidation state of the redox-active metal centers in the course of the electrocatalytic oxygen evolution reaction (OER) process. The 2D MOFs of L₁ and L₂ with Co(II) (1 and 3) and Ni(II) (2 and 4) have been produced via the conventional hydrothermal synthesis, while the MOFs of Cu(II) (Cu@1 and Cu@3) are obtained by the postsynthetic transmetallation reaction of MOFs 1 and 3. The electrocatalytic OER activities of the six MOFs have been studied to explore the influence of the redox potential of the transition-metal quasi-reversible couples and the coordination environment around the redox-active metal centers in the electrocatalytic activity. The lowest overpotential of 370 mV exhibited by MOF 2 with the highest current density and TOF value indicates the importance of the presence of coordinated water molecules and the lowest redox potential value of the most favorable quasi-reversible couple Ni⁺²/Ni⁺³. These catalysts exhibit a remarkable stability up to 1000 OER cycles. These studies pave the way for the design of MOF materials toward the development of a promising heterogeneous OER electrocatalyst.

Crystalline Copper Selenide as a Reliable Non-Noble Electro(pre)catalyst for Overall Water Splitting

Electrochemical water splitting remains a frontier research topic in the quest to develop artificial photosynthetic systems by using noble metal-free and sustainable catalysts. Herein, a highly crystalline CuSe has been employed as active electrodes for overall water splitting (OWS) in alkaline media. The pure-phase klockmannite CuSe deposited on highly conducting nickel foam (NF) electrodes by electrophoretic deposition (EPD) displayed an overpotential of merely 297 mV for the reaction of oxygen evolution (OER) at a current density of 10 mA cm-2 whereas an overpotential of 162 mV was attained for the hydrogen evolution reaction (HER) at the same current density, superseding the Cu-based as well as the state-of-the-art RuO2 and IrO2 catalysts. The bifunctional behavior of the catalyst has successfully been utilized to fabricate an overall water-splitting device, which exhibits a low cell voltage (1.68 V) with long-term stability. Post-catalytic analyses of the catalyst by ex-situ microscopic, spectroscopic, and analytical methods confirm that under both OER and HER conditions, the crystalline and conductive CuSe behaves as an electro(pre)catalyst forming a highly reactive in situ crystalline Cu(OH)2 overlayer (electro(post)catalyst), which facilitates oxygen (O2 ) evolution, and an amorphous Cu(OH)2 /CuOx active surface for hydrogen (H2 ) evolution. The present study demonstrates a distinct approach to produce highly active copper-based catalysts starting from copper chalcogenides and could be used as a basis to enhance the performance in durable bifunctional overall water splitting.

A Low-Temperature Molecular Precursor Approach to Copper-Based Nano-Sized Digenite Mineral for Efficient Electrocatalytic Oxygen Evolution Reaction

In the urge of designing noble metal-free and sustainable electrocatalysts for oxygen evolution reaction (OER), herein, a mineral Digenite Cu9 S5 has been prepared from a molecular copper(I) precursor, [{(PyHS)2 CuI (PyHS)}2 ](OTf)2 (1), and utilized as an anode material in electrocatalytic OER for the first time. A hot injection of 1 yielded a pure phase and highly crystalline Cu9 S5 , which was then electrophoretically deposited (EPD) on a highly conducting nickel foam (NF) substrate. When assessed as an electrode for OER, the Cu9 S5 /NF displayed an overpotential of merely 298±3 mV at a current density of 10 mA cm-2 in alkaline media. The overpotential recorded here supersedes the value obtained for the best reported Cu-based as well as the benchmark precious-metal-based RuO2 and IrO2 electrocatalysts. In addition, the choronoamperometric OER indicated the superior stability of Cu9 S5 /NF, rendering its suitability as the sustainable anode material for practical feasibility. The excellent catalytic activity of Cu9 S5 can be attributed to the formation of a crystalline CuO overlayer on the conductive Cu9 S5 that behaves as active species to facilitate OER. This study delivers a distinct molecular precursor approach to produce highly active copper-based catalysts that could be used as an efficient and durable OER electro(pre)catalysts relying on non-precious metals.

Dicopper(ii) tetrapyridyl complexes incorporated with ancillary ligands for effective water oxidation

Water oxidation catalysis of dicopper(ii) tetrapyridyl complexes under alkaline conditions was improved by diamine ligands.

Normal-pulse-voltage-assisted in situ fabrication of graphene-wrapped MOF-derived CuO nanoflowers for water oxidation

Herein, a normal-pulse-voltage-assisted method is proposed for preparation of high quality graphene-wrapped CuO nanoflowers on CF. The as-obtained CuO NF@G/CF electrode exhibits a competitive OER catalytic performance in 1.0 M KOH solution.

Inter-chain double-site synergistic photocatalytic hydrogen evolution in robust cuprous coordination polymers

We evaluate photocatalytic H₂ generation of three Cu-based coordination polymers, a record-high rate of 57.64 mmol g⁻¹ h⁻¹ for Cu–MIM, and reveal that the excellent performances are due to the synergies of the inter-chain double-site Cu atoms.

Enhanced hydrogen evolution from CuOx-C/TiO2 with multiple electron transport pathways

Titanium dioxide nanoparticles co-modified with CuO_x (0≤x≤2) and carbonaceous materials were prepared with a simple hydrolysis and photo-reduction method for photocatalytic hydrogen generation. SEM/TEM and XPS analysis indicated that the carbonaceous materials were mostly coated on the TiO₂ surface and clearly revealed that the Cu species exhibited multivalence states, existing as CuO_x (0≤x≤2). The optimal catalyst showed a 56-fold enhanced hydrogen evolution rate compared with that of the pure C/TiO₂ catalyst. Further, an intensive multiple electron transfer effect originating from CuO_x and the carbonaceous materials is proposed to be responsible for the elevated photoactivity. CuO_x species serve as electron donors facilitating charge carrier transfer and proton reduction sites. The carbonaceous materials function as the “bridge” that transfers the electrons of TiO₂ to the CuO_x species, which provides a new route for electron transfer and reinforces the effect of CuO_x as a co-catalyst. In this study, the CuO_x and C co-modified TiO₂ catalyst was prepared with multiple electron transport pathways and enhanced hydrogen production evolution, which provides a deep understanding for the design of co-catalyst-based photocatalysts.

Electro- and Solar-Driven Fuel Synthesis with First Row Transition Metal Complexes

The synthesis of renewable fuels from abundant water or the greenhouse gas CO2 is a major step toward creating sustainable and scalable energy storage technologies. In the last few decades, much attention has focused on the development of nonprecious metal-based catalysts and, in more recent years, their integration in solid-state support materials and devices that operate in water. This review surveys the literature on 3d metal-based molecular catalysts and focuses on their immobilization on heterogeneous solid-state supports for electro-, photo-, and photoelectrocatalytic synthesis of fuels in aqueous media. The first sections highlight benchmark homogeneous systems using proton and CO2 reducing 3d transition metal catalysts as well as commonly employed methods for catalyst immobilization, including a discussion of supporting materials and anchoring groups. The subsequent sections elaborate on productive associations between molecular catalysts and a wide range of substrates based on carbon, quantum dots, metal oxide surfaces, and semiconductors. The molecule-material hybrid systems are organized as "dark" cathodes, colloidal photocatalysts, and photocathodes, and their figures of merit are discussed alongside system stability and catalyst integrity. The final section extends the scope of this review to prospects and challenges in targeting catalysis beyond "classical" H2 evolution and CO2 reduction to C1 products, by summarizing cases for higher-value products from N2 reduction, C x>1 products from CO2 utilization, and other reductive organic transformations.

Copper Containing Molecular Systems in Electrocatalytic Water Oxidation—Trends and Perspectives

Molecular design represents an exciting platform to refine mechanistic details of electrocatalytic water oxidation and explore new perspectives. In the growing number of publications some general trends seem to be outlined concerning the operation mechanisms, with the help of experimental and theoretical approaches that have been broadly applied in the case of bioinorganic systems. In this review we focus on bio-inspired Cu-containing complexes that are classified according to the proposed mechanistic pathways and the related experimental evidence, strongly linked to the applied ligand architecture. In addition, we devote special attention to features of molecular compounds, which have been exploited in the efficient fabrication of catalytically active thin films.

Copper coordination polymer electrocatalyst for strong hydrogen evolution reaction activity in neutral medium: influence of coordination environment and network structure

Water-coordinated copper coordination polymer exhibited strong enhancement of HER activity in neutral medium with good stability compared to non-water-coordinated coordination polymer.

The chemically reduced CuO–Co3O4 composite as a highly efficient electrocatalyst for oxygen evolution reaction in alkaline media

The fabrication of efficient, alkaline-stable and nonprecious electrocatalysts for the oxygen evolution reaction is highly needed; however, it is a challenging task.

Electrocatalytic reduction of protons to hydrogen by a copper complex of the pentadentate ligand Dmphen-DPA in a nonaqueous electrolyte

An aminopyridine-based copper complex was synthesized and investigated for its electrocatalytic proton reduction activity and the plausible mechanism.

Multifunctional nanostructured electrocatalysts for energy conversion and storage: current status and perspectives

Electrocatalytic oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) have attracted widespread attention because of their important role in the application of various energy storage and conversion devices, such as fuel cells, metal-air batteries and water splitting devices. However, the sluggish kinetics of the HER/OER/ORR and their dependency on expensive noble metal catalysts (e.g., Pt) obstruct their large-scale application. Hence, the development of efficient and robust bifunctional or trifunctional electrocatalysts in nanodimension for both oxygen reduction/evolution and hydrogen evolution reactions is highly desired and challenging for their commercialization in renewable energy technologies. This review describes some recent developments in the discovery of bifunctional or trifunctional nanostructured catalysts with improved performances for application in rechargeable metal-air batteries and fuel cells. The role of the electronic structure and surface redox chemistry of nanocatalysts in the improvement of their performance for the ORR/OER/HER under an alkaline medium is highlighted and the associated reaction mechanisms developed in the recent literature are also summarized.

One step electrochemical route to the fabrication of highly ordered array of cylindrical nano porous structure and its electrocatalytic performance toward efficient hydrogen evolution

An efficient and non-precious metal catalyst is a key factor for hydrogen evolution reaction (HER). Here we report that the fabrication of highly ordered porous arrays of Cu-Zn-Ni alloy has been carried out in a one-step electrochemical route at a constant apparent current density of -3 A·cm^-2. The optimum film composition and reactivity of the electrodes for catalytic hydrogen evolution reaction were analyzed by using different current densities, deposition time and bath concentration. For this purpose, onset potentials in linear sweep voltammograms (LSV) were compared. The structure and morphology of nanoporous Cu-Zn-Ni and Cu-Zn alloy were characterized by SEM and energy dispersive X-ray (EDS) analysis. The experimental results on the behavior of electrocatalytic activity of prepared alloys showed that the addition of nickel to the alloys improves of the electrocatalytic performance of the electrodes toward HER. In addition, enhancement of electrochemical activity toward hydrogen evolution can be attributed to the large electrochemical active surface area and porous structure of Cu-Zn-Ni alloy. In order to improvement of reaction kinetics, Tafel plots were derived from LSV voltammograms, and the exchange current densities for HER on synthesized electrodes (Cu-Zn and Cu-Zn-Ni alloys) were calculated about 3.2 × 10^-5 and 2.1 × 10^-3 mA·cm^-2, respectively.

CoP nanoparticles anchored on N,P-dual-doped graphene-like carbon as a catalyst for water splitting in non-acidic media

The design of earth-abundant, active and stable water splitting bifunctional catalysts that operate in the same media is crucial for large-scale water electrolysis. CoP nanoparticles anchored on N,P-dual-doped mesoporous graphene-like carbon (CoP@NPMG) acts as an outstanding bifunctional electrocatalyst for both the hydrogen evolution reaction and the oxygen evolution reaction over a wide pH range. The synthesis method of CoP@NPMG is template-free and simple, and all the precursors are easily obtained; both these factors contribute to the feasibility of practical large-scale fabrication. When employed as a bifunctional electrode, CoP@NPMG enables high-performance water splitting with a current density of 10 mA cm^-2 at cell voltages of only 1.58 V and 1.74 V in 1 M KOH and 1 M PBS, respectively. In addition, CoP@NPMG displays excellent catalytic stability at all pH values.

Generalized Synthesis of Ultrathin Cobalt-Based Nanosheets from Metallophthalocyanine-Modulated Self-Assemblies for Complementary Water Electrolysis

The development of effective approaches for preparing large-area, self-standing, ultrathin metal-based nanosheets, which have proved to be favorable for catalytic applications such as water electrolysis, is highly desirable but remains a great challenge. Reported herein is a simple and versatile strategy to synthesize ultrathin Co₃ O₄ and CoP NSs consisting of close-packed nanoparticles by pyrolyzing cobalt(II) phthalocyanine/graphene oxide (CoPc/GO) assemblies in air and subsequent topotactic phosphidation while preserving the graphene-like morphology. The strong π-π stacking interactions between CoPc and GO, and the inhibiting effect of the tetrapyrrole-derived macrocycle for grain growth during the catalytic carbon gasification contribute to the NSs forming. The resulting homologous Co₃ O₄ and CoP NSs display outstanding catalytic activity in alkaline media toward the oxygen evolution reaction and the hydrogen evolution reaction, respectively, ascribed to the richly exposed active sites, and the expedited electrolyte/ion transmission path. The integrated asymmetrical two-electrode configuration also presents a superior cell voltage of 1.63 V at 10 mA cm^-2 for overall water splitting, accompanied with the excellent durability during long-term cycling. Further evidences validate that this strategy is appropriate to fabricate graphene-like ultrathin NSs of many other metal oxides, such as Fe₂ O₃ , NiO, MoO₃ , and mixed-metal oxides, for various applications.

MOF-Derived Bifunctional Cu3 P Nanoparticles Coated by a N,P-Codoped Carbon Shell for Hydrogen Evolution and Oxygen Reduction

Metal-organic frameworks (MOFs) have recently emerged as a type of uniformly and periodically atom-distributed precursor and efficient self-sacrificial template to fabricate hierarchical porous-carbon-related nanostructured functional materials. For the first time, a Cu-based MOF, i.e., Cu-NPMOF is used, whose linkers contain nitrogen and phosphorus heteroatoms, as a single precursor and template to prepare novel Cu₃ P nanoparticles (NPs) coated by a N,P-codoped carbon shell that is extended to a hierarchical porous carbon matrix with identical uniform N and P doping (termed Cu₃ P@NPPC) as an electrocatalyst. Cu₃ P@NPPC demonstrates outstanding activity for both the hydrogen evolution and oxygen reduction reaction, representing the first example of a Cu₃ P-based bifunctional catalyst for energy-conversion reactions. The high performances are ascribed to the high specific surface area, the synergistic effects of the Cu₃ P NPs with intrinsic activity, the protection of the carbon shell, and the hierarchical porous carbon matrix doped by multiheteroatoms. This strategy of using a diverse MOF as a structural and compositional material to create a new multifunctional composite/hybrid may expand the opportunities to explore highly efficient and robust non-noble-metal catalysts for energy-conversion reactions.

Copper(i) tertiary phosphine xanthate complexes as single source precursors for copper sulfide and their application in the OER

Three heteroleptic bis(triphenylphosphine)copper(i) methyl pyridyl xanthate complexes used as single source precursors for copper sulfide and the resulting copper sulfides have been utilized for the electrocatalytic oxygen evolution reaction.