Platinum Nanoparticle During Electrochemical Hydrogen Evolution: Adsorbate Distribution, Active Reaction Species, and Size Effect

Bio-Inspired Superhydrophilic Self-Assembled Coronavirus-Like Pt-WC/CNT for Hydrogen Evolution Reaction

This study presents a novel approach to enhance the catalytic activity of composite materials by promoting active surface exposure and improving hydrogen transfer performance. Through a self-assembly route involving tailored gas-solid and galvanic replacement reactions, Pt-WC/CNT catalysts with superhydrophilicity and coronavirus-like structure are synthesized. These unique structural features contribute to a remarkable enhancement in the electrocatalytic performance of the hydrogen evolution reaction (HER). Notably, the Pt-WC/CNT catalyst exhibits an outstanding intrinsic activity and efficient bubble transfer properties, leading to a high turnover frequency of 34.97 H2·s-1 at an overpotential of 100 mV. This value is 4.8 times higher than that achieved by commercial Pt/C catalysts (7.30 H2·s-1), establishing Pt-WC/CNT as one of the most active catalysts reported to date. Moreover, the combination of gas-solid and galvanic replacement reactions in the synthesis process offers a scalable route for the production of Pt-loading controllable composite catalysts, thus challenging the dominance of commercial Pt/C catalysts.

Carbon-Promoted Pt-Single Atoms Anchored on RuO2 Nanorods to Boost Electrochemical Hydrogen Evolution

While efficient for electrochemical hydrogen evolution reaction (HER), Pt is limited by its cost and rarity. Traditional Pt catalysts and Pt single-atom (aPt) catalysts (Pt-SACs) face challenges in maintaining kinetically favorable HER pathways (Volmer-Tafel) at ultralow Pt loadings. Herein, carbon-promoted aPts were deposited on RuO2 without the addition of reductants. aPts confined on carbon-supported RuO2 nanorods (aPt/RuO2NR/Carbon) promoted "inter-aPts" Tafel. aPt/RuO2NR/Carbon is the Pt-SAC that retained underpotentially deposited H; additionally, its HER onset overpotential was "negative". The aPt/RuO2NR/Carbon exhibited 260-fold higher Pt mass activity (imPt)/turnover frequency (TOF) (522.7 A mg-1/528.4 s-1) than that of commercial Pt/C (1.9 A mg-1/1.9 s-1). In an ultralow Pt loading (0.19 μg cm-2), the HER rate-determining step maintained Volmer-Tafel and the Pt utilization efficiency was 100.3%.

Hydrogen evolution descriptors of 55-atom PtNi nanoclusters and interaction with graphite

Density functional simulations have been performed for PtnNi55-nclusters (n=0,12,20,28,42,55) to investigate their catalytic properties for the hydrogen evolution reaction (HER). Starting from the icosahedralPt12Ni43, hydrogen adsorption energetics and electronicd-band descriptors indicate HER activity comparable to that of purePt55(distorted reduced core structure). The PtNi clusters accommodate a large number of adsorbed hydrogen before reaching a saturated coverage, corresponding to 3-4 H atoms per icosahedron facet (in total ∼70-80). The differential adsorption free energies are well within the window of|ΔGH|<0.1 eV which is considered optimal for HER. The electronic descriptors show similarities with the platinumd-band, although the uncovered PtNi clusters are magnetic. Increasing hydrogen coverage suppresses magnetism and depletes electron density, resulting in expansion of the PtNi clusters. For a single H atom, the adsorption free energy varies between -0.32 (Pt12Ni43) and -0.59 eV (Pt55). The most stable adsorption site is Pt-Pt bridge for Pt-rich compositions and a hollow site surrounded by three Ni for Pt-poor compositions. A hydrogen molecule dissociates spontaneously on the Pt-rich clusters. The above HER activity predictions can be extended to PtNi on carbon support as the interaction with a graphite model structure (w/o vacancy defect) results in minor changes in the cluster properties only. The cluster-surface interaction is the strongest forPt55due to its large facing facet and associated van der Waals forces.

Photosystem II for photoelectrochemical hydrogen production

Water is a primary source of electrons and protons for photosynthetic organisms. For the production of hydrogen through the process of mimicking natural photosynthesis, photosystem II (PSII)-based hybrid photosynthetic systems have been created, both with and without an external voltage source. In the past 30 years, various PSII immobilization techniques have been proposed, and redox polymers have been created for charge transfer from PSII. This review considers the main components of photosynthetic systems, methods for evaluating efficiency, implemented systems and the ways to improve them. Recently, low-overpotential catalysts have emerged that do not contain precious metals, which could ultimately replace Pt and Ir catalysts and make water electrolysis cheaper. However, PSII competes with semiconductor analogues that are less efficient but more stable. Methods originally created for sensors also allow for the use of PSII as a component of a photoanode. To date, charge transfer from PSII remains a bottleneck for such systems. Novel data about action mechanism of artificial electron acceptors in PSII could develop redox polymers to level out mass transport limitations. Hydrogen-producing systems based on PSII have allowed to work out processes in artificial photosynthesis, investigate its features and limitations.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12551-023-01139-5.

Functionalized Metal Nanoparticles in Cancer Therapy

Currently, there are many studies on the application of nanotechnology in therapy. Metallic nanoparticles are promising nanomaterials in cancer therapy; however, functionalization of these nanoparticles with biomolecules has become relevant as their effect on cancer cells is considerably increased by photothermal and photodynamic therapies, drug nanocarriers, and specificity by antibodies, resulting in new therapies that are more specific against different types of cancer. This review describes studies on the effect of functionalized palladium, gold, silver and platinum nanoparticles in the treatment of cancer, these nanoparticles themselves show an anticancer effect. This effect is further enhanced when the NPs are functionalized with either antibodies, DNA, RNA, peptides, proteins, or folic acid and other molecules. These NPs can penetrate the cell and accumulate in the tumor tissue, resulting in a cytotoxic effect through the generation of ROS, the induction of apoptosis, cell cycle arrest, DNA fragmentation, and a photothermal effect. NP-based therapy is a new strategy that can be used synergistically with chemotherapy and radiotherapy to achieve more effective therapies and reduce side effects.

Electrochemical hydrogen evolution on Pt-based catalysts from a theoretical perspective

Hydrogen evolution reaction (HER) by splitting water is a key technology toward a clean energy society, where Pt-based catalysts were long known to have the highest activity under acidic electrochemical conditions but suffer from high cost and poor stability. Here, we overview the current status of Pt-catalyzed HER from a theoretical perspective, focusing on the methodology development of electrochemistry simulation, catalytic mechanism, and catalyst stability. Recent developments in theoretical methods for studying electrochemistry are introduced, elaborating on how they describe solid-liquid interface reactions under electrochemical potentials. The HER mechanism, the reaction kinetics, and the reaction sites on Pt are then summarized, which provides an atomic-level picture of Pt catalyst surface dynamics under reaction conditions. Finally, state-of-the-art experimental solutions to improve catalyst stability are also introduced, which illustrates the significance of fundamental understandings in the new catalyst design.

Supraparticles for naked-eye H2 indication and monitoring: Improving performance by variation of the catalyst nanoparticles

The recent transition to H₂-based energy storage demands reliable H₂ sensors that allow for easy, fast, and reliable detection of leaks. Conventional H₂ detectors are based on the changes of physical properties of H₂ probes induced by subsurface H-atoms to a material such as electrical conductivity. Herein, we report on highly reactive gasochromic H₂ detectors based on the adsorption of H₂ on the material surface. We prepared supraparticles (SPs) containing different types of noble metal nanoparticles (NPs), silica NPs, and the dye resazurin by spray-drying and tested their performance for H₂ detection. The material undergoes a distinct color change due to the hydrogenation of the purple resazurin to pink resorufin and, finally, colorless hydroresorufin. The stepwise transition is fast and visible to the naked eye. To further improve the performance of the sensor, we tested the reactivity of SPs with different catalytically active NPs by means of in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). We show that the choice of the NP catalyst has a pronounced effect on the response of the H₂ indicator. In addition, we demonstrate that the performance depends on the size of the NPs. These effects are attributed to the availability of reactive H-atoms on the NP surface. Among the materials studied, Pt-containing SPs gave the best results for H₂ detection.

Modulating Dominant Facets of Pt through Multistep Selective Anchored on WC for Enhanced Hydrogen Evolution Catalysis

Facilitating the exposure of the active crystal facets on the surfaces of composite catalysts is a representative route to promote catalytic activity. Based on a tailored galvanic replacement reaction, herein, a self-assembly route is reported to prepare Pt-WC/CNT with Pt (200) preferential orientation and well-dispersed structure, which are capable of substantially boosting electrocatalysis in hydrogen evolution reaction (HER). Formation mechanism reveals that the (200)-dominated Pt-based catalysts form in galvanic replacement reaction through selective anchored on WC, and the multistep galvanic replacement process plays a critical role to realize the Pt (200)-dominated growth in higher Pt loading catalyst. These unique structural features endow the Pt-WC/CNT with a high turnover frequency of 94.18 H2·s-1 at 100 mV overpotential, 7-fold higher than that of commercial Pt/C (13.55 H2·s-1), ranking it among the most active catalysts. In addition, this method, which combines with gas-solid reaction and galvanic replacement reaction, paves the way to scalable synthesis as Pt facets-controllable composite catalysts to challenge commercial Pt/C.

Pt nanoparticles under oxidizing conditions - implications of particle size, adsorption sites and oxygen coverage on stability

Platinum nanoparticles are efficient catalysts for different reactions, such as oxidation of carbon and nitrogen monoxides. Adsorption and interaction of oxygen with the nanoparticle surface, taking place under reaction conditions, determine not only the catalytic efficiency but also the stability of the nanoparticles against oxidation. In this study, platinum nanoparticles in oxygen environment are investigated by systematic screening of initial nanoparticle-oxygen configurations and employing density functional theory and a thermodynamics-based approach. The structures formed at low oxygen coverages are described by adsorption of atomic oxygen on the nanoparticles whereas at high coverages oxide-like species are formed. The relative stability of adsorption configurations at different oxygen coverages, including the phase of fully oxidized nanoparticles, is investigated by constructing p-T phase diagrams for the studied systems.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

Electronic Modulation of Pt Nanoparticles on Ni3N-Mo2C by Support-Induced Strategy for Accelerating Hydrogen Oxidation and Evolution

Electrochemical energy conversion and storage through hydrogen has revolutionized sustainable energy systems using fuel cells and electrolyzers. Regrettably, the sluggish alkaline hydrogen oxidation reaction (HOR) hampers advances in fuel cells. Herein, we report a Pt/Ni₃N-Mo₂C bifunctional electrocatalyst toward HOR and hydrogen evolution reaction (HER). The Pt/Ni₃N-Mo₂C exhibits remarkable HOR/HER performance in alkaline media. The mass activity at 50 mV and exchange current density of HOR are 5.1 and 1.5 times that of commercial Pt/C, respectively. Moreover, it possesses an impressive HER activity with an overpotential of 11 mV @ 10 mA cm^-2, which is lower than that of Pt/C and most reported electrocatalysts under the same conditions. Density functional theory (DFT) calculations combined with experimental results reveal that Pt/Ni₃N-Mo₂C not only possesses an optimal balance between hydrogen binding energy (HBE) and OH^- adsorption but also facilitates water adsorption and dissociation on the catalyst surface, which contribute to the excellent HOR/HER performance. Thus, this work may guide bifunctional HOR/HER catalyst design in the conversion and transport of energy.

Mechanistic insights into dual active sites in Au@W18O49 electrocatalysts for hydrogen evolution reaction

Electrocatalytic hydrogen evolution reaction (HER) for water splitting is promising to replace fossil fuels. The high-efficient electrocatalyst with multiple functional sites is indispensable but challenging. Herein, urchin-like Au@W18O49 electrocatalyst with...

The mechanism underlying the functionalisation of cobalt nanoparticles by carboxylic acids: a first-principles computational study

The promise of biocompatible magnetic nanoparticles with high magnetic saturation in the implementation as drug carriers and hyperthermia agents has generated significant interest in functionalised cobalt nanoparticles. Carboxylic acid coatings on metallic nanoparticles have been shown as an attractive option owing to their respectable stability and biocompatibility. However, only limited information is available on the molecular mechanism leading to the formation of such protective coatings. In this study, ab initio molecular dynamics simulations have been used to unravel the functionalisation mechanism starting from a neutral cobalt cluster and valeric acid molecules. Three stages were detected in the coating process: (i) rapid initial adsorption of acid molecules, (ii) simultaneous adsorption of new molecules and dissociation of those already interacting with the cluster, and, finally, (iii) grouping of dissociated hydrogen atoms and subsequent desorption of acid molecules. The fate of the hydrogen atoms was probed through a combination of static and dynamic ab initio modelling approaches, which predicted H2 generation with favourable energetics. A better understanding of the functionalisation and interaction mechanisms will aid the rational design of biocompatible cobalt nanoparticles for various applications.

Size-selective synthesis of platinum nanoparticles on transition-metal dichalcogenides for the hydrogen evolution reaction

We report a micellar system to prepare Pt-TMDs composites with tunable Pt nanoparticles (NPs, 2-6 nm in size) on single-layer TMDs (MoS2, TiS2, TaS2) nanosheets. The Pt-MoS2 composites have shown excellent performance for the hydrogen evolution reaction (HER) with the Pt NPs exhibiting a volcano-type size effect toward HER activity due to the synergistic effects between the Pt NPs and MoS2.

Pt nanocluster size effects in the hydrogen evolution reaction: approaching the theoretical maximum activity

Hydrogen production from electrocatalytic water splitting in electrolyzers is a key process to store excess electric energy produced from intermittent renewable energy sources. For proton exchange membrane (PEM) electrolyzers, carbon supported platinum particles exhibit the highest rates for the hydrogen evolution reaction (HER); however, high Pt costs limit the wide spread use of this technology. By employing a graphene layer grown on a Ru(0001) single crystal as a template for Pt nanocluster (NC) growth, we studied the dependence of the HER activity on the NC size using NCs of different sizes. We provide clear quantitative experimental evidence for a volcano-like relationship between the HER activity and the NC size which has been missing so far. For Pt NCs with very low sizes below 2 nm, we found stunningly improved exchange HER current densities. The highest exchange current density was observed for Pt NCs with an average size of ca. 38 atoms. These Pt₃₈ NCs do not only surpass the Pt-mass-specific activity of commercial Pt electrode materials by well above three orders of magnitude, also their exchange current density is located close to the maximum exchange current density for the HER predicted theoretically for transition metal surfaces. The present work provides a strong stimulus for future research towards technically feasible Pt NC catalysts with cluster sizes in the range of few tens of Pt atoms.

Adsorbate-Induced Segregation of Cobalt from PtCo Nanoparticles: Modeling Au Doping and Core AuCo Alloying for the Improvement of Fuel Cell Cathode Catalysts

Platinum, when used as a cathode material for the oxygen reduction reaction, suffers from high overpotential and possible dissolution, in addition to the scarcity of the metal and resulting cost. Although the introduction of cobalt has been reported to improve reaction kinetics and decrease the precious metal loading, surface segregation or complete leakage of Co atoms causes degradation of the membrane electrode assembly, and either of these scenarios of structural rearrangement eventually decreases catalytic power. Ternary PtCo alloys with noble metals could possibly maintain activity with a higher dissolution potential. First-principles-based theoretical methods are utilized to identify the critical factors affecting segregation in Pt-Co binary and Pt-Co-Au ternary nanoparticles in the presence of oxidizing species. With a decreasing share of Pt, surface segregation of Co atoms was already found to become thermodynamically viable in the PtCo systems at low oxygen concentrations, which is assigned to high charge transfer between species. While the introduction of gold as a dopant caused structural changes that favor segregation of Co, creation of CoAu alloy core is calculated to significantly suppress Co leakage through modification of the electronic properties. The theoretical framework of geometrically different ternary systems provides a new route for the rational design of oxygen reduction catalysts.

Facile synthesis of Nafion-supported Pt nanoparticles with ultra-low loading as a high-performance electrocatalyst for hydrogen evolution reaction

x%Pt-Naf-CV (Pt-Nafion-Cyclic Voltammetry) catalysts with homogeneously distributed platinum nanoparticles and ultra-low Pt loading are successfully synthesized by using a facile potential cycling approach. The as-synthesized 0.8%Pt-Naf-CV catalyst exhibits an enhanced electrocatalytic activity for hydrogen evolution reaction (HER) in 0.5 M H₂SO₄ solution, which obtains a low overpotential of 34 mV at 10 mA cm^-2. The linear sweep voltammetry (LSV) curve of 0.8%Pt-Naf-CV catalyst is almost consistent with that of commercial Pt/C. However, the 0.8%Pt-Naf-CV catalyst displays a more excellent stability and durability in comparison with commercial Pt/C. Besides, the Pt loading of Pt/C (Pt-10 wt%) is about 10 times that of 0.8%Pt-Naf-CV catalyst. The improved electrocatalytic performances are derived from the synergistic effects of Pt and Nafion. The Nafion plays a significant role as a dispersant, carrier and structure directing agent on the morphology and size of the Pt catalyst. This result contributes a promising method to enhance the catalytic activity and reduce the amount of Pt.

Vanadium-doping in interlayer-expanded MoS2 nanosheets for the efficient electrocatalytic hydrogen evolution reaction

Synergistic modulations of vanadium doping, interlayer expansion and hybrid 1T&2H phases of few-layered MoS₂ nanosheets are realized to gain structural and electronic benefits for enhanced hydrogen evolution reaction performance.

Mechanisms for hydrogen evolution on transition metal phosphide catalysts and a comparison to Pt(111)

Earth-abundant transition metal phosphides have been demonstrated to be promising alternative catalysts to replace Pt for hydrogen evolution reaction (HER). However, the mechanism for the hydrogen evolution reaction on transition metal phosphides remains unclear. Here, we explore the catalytically active sites and the reaction mechanisms on a variety of model transition metal phosphide surfaces by building cluster expansion models and running Monte Carlo simulations. We demonstrate that the effect of hydrogen coverage, interaction between hydrogen atoms and desorption kinetics all dictate the HER mechanisms and the active sites, and we propose mechanisms that are in good agreement with experimental studies. The present method provides a general and effective way to probe the active sites and study the mechanisms of catalytic reactions, which can facilitate the rational design of highly active electrocatalysts.

Hydrogen Evolution Enhancement over a Cobalt-Based Schottky Interface

A proof-of-concept strategy for significant enhancement of hydrogen evolution reaction (HER) performance of transition metals via construction of a metal/semiconductor Schottky junction is presented. The decoration of low-cost commercial TiO₂ nanoparticles on the surface of microscale Co dendrites causes a significant charge transfer across the Co/TiO₂ Schottky interface and enhances the local electron density at the Co surface, confirmed by X-ray photoelectron spectroscopy results and density functional theory calculations. The Co/TiO₂ Schottky catalyst displays superior HER activity with a turnover frequency of 0.052 s^-1 and an exchange current density of 79 μA cm^-2, which are about 4.3 and 4.0 times greater than that of pristine Co, respectively. Moreover, the Co/TiO₂ Schottky catalyst displays excellent electrochemical durability for long-term operation in both alkaline solution and high saline solution. Theoretical calculations suggest that the Schottky junction plays an important role to optimize hydrogen adsorption free energy (ΔG_H*) by tuning the electronic structure, which enhances the performance for HER of the Co/TiO₂ Schottky catalyst. This study of modulating the electronic structure of the catalysts via the Schottky junction could provide valuable insights for designing and synthesizing low-cost, high-performance electrocatalysts.

Adsorbed States of Hydrogen on Platinum: A New Perspective

The interaction of hydrogen with platinum is enormously important in many areas of catalysis. The most significant of these are in polymer electrolyte membrane fuel cells (PEMFC), in which carbon‐supported platinum is used to dissociate hydrogen gas at the anode. The nature of adsorbed hydrogen on platinum has been studied for many years on single‐crystal surfaces, on high‐surface area‐platinum metal (Raney platinum and platinum black), and on supported catalysts. Many forms of vibrational spectroscopy have played a key role in these studies, however, there is still no clear consensus as to the assignment of the spectra. In this work, ab initio molecular dynamics (AIMD) and lattice dynamics were used to study a 1.1 nm nanoparticle, Pt₄₄H₈₀. The results were compared to new inelastic neutron scattering spectra of hydrogen on platinum black and of a carbon‐supported platinum fuel cell catalyst and an assignment scheme that rationalises all previous data is proposed.

Ultrasmall (<2 nm) Au@Pt Nanostructures: Tuning the Surface Electronic States for Electrocatalysis

The ability to tune the electronic properties of nanomaterials has played a major role in the development of sustainable energy technologies. Metallic nanocatalysts are at the forefront of these advances. Their unique properties become even more interesting when we can control the distribution of the electronic states in the nanostructure. Here, we provide a comprehensive evaluation of the electronic surface states in ultrasmall metallic nanostructures by combining experimental and theoretical methods. The developed strategy allows the controlled synthesis of bimetallic nanostructures in the core-shell configuration, dispensing of the use of any surfactant or stabilizing agents, which usually inactivate important surface phenomena. The synthesized ultrasmall Au@Pt nanoarchitecture (∼1.8 nm) presents an enhanced performance catalyzing the hydrogen evolution reaction. First-principles calculations of projected and space-resolved local density of states of Au₅₅@Pt₉₂ (core-shell), Au₅₅Pt₉₂ (alloy), and Pt₁₄₇ nanoparticles show a prominent increase in the surface electronic states for the core-shell bimetallic nanomaterial. It arises from a more-effective charge transfer from gold to the surface platinum atoms in the core-shell configuration. In pure Pt₁₄₇ or Au₅₅Pt₉₂ alloy nanoparticles, a great part of the electronic states near the Fermi level is buried in the core atoms, disabling these states for catalytic applications. The proposed experimental-theoretical approach may be useful for the design of other systems composed of metallic nanoparticles supported on distinct substrates, such as two-dimensional materials and porous matrices. These nanomaterials find several applications not only in heterogeneous catalysis but also in sensing and optoelectronic devices.

Metallic 1T-VS2 nanosheets featuring V2+ self-doping and mesopores towards an efficient hydrogen evolution reaction

Metallic 1T-VS₂ nanosheets featuring V²⁺-doping and plenty of mesopores have abundant defects and high conductivity and exhibit superior catalytic activity for electrochemical water splitting.

Optimizing special quasirandom structure (SQS) models for accurate functional property prediction in disordered 2D alloys

2D materials such as MXenes have garnered attention in a wide field of applications ranging from energy to environment to medical. Properties of 2D materials can be tailored via alloying and in some cases, solid-solutions (disordered alloys) are formed. To predict the disordered alloy properties via first-principles, the model structure needs to imitate the random arrangements of alloyants and yet remains computationally tractable. Using density functional theory and the cluster expansion method, we investigate the accuracy of using of special quasirandom structures (SQSs) for predicting disordered 2D alloy properties, evaluating the effect of SQS supercell size on the prediction quality of formation energies, elastic properties, and structural parameters. We illustrate the findings with 5 different disordered binary [Formula: see text] MXene alloy systems (where M  =  Ti and M'  =  Zr, Hf, V, Nb, or Ta), demonstrating that SQSs around 6-8 times the primitive cell (N  =  6-8) are sufficient to attain convergence in the property predictions versus supercell size. For formation energies, SQSs with N  >  4 are found to reproduce the formation energies of the fully disordered phase within ~2.5 meV. For the simulation of the experimentally-synthesized TiNbCO₂, we find convergence in structural parameters and elastic tensors at N ~ 6. We traced the convergence of the predictions to the convergence in the band structure-related properties via analysis of the electronic densities-of-states and the projected crystal overlap Hamilton population. Our findings suggest that modest sized SQSs would reproduce the properties of disordered MXene alloys. The results should help guide the investigations of structure-property relationships in other disordered 2D materials as well.

First-Principles Determination of Active Sites of Ni Metal-Based Electrocatalysts for Hydrogen Evolution Reaction

The determination of active sites of materials is essential for the molecular design of high-performance catalysts. In this study, the first-principles method is applied to investigate the active sites of low-cost Ni metal-based electrocatalysts for hydrogen evolution reactions (HER), which is a promising alternative to expensive Pt metal-based catalysts. The adsorption of hydrogen on different sites of pristine and partially oxidized Ni(111) surface is investigated. All of the possible configurations have been systematically investigated here with the consideration of their Boltzmann distribution. Using the Gibbs free energy of intermediate H atoms (Δ G_H*) as a descriptor, it is found that the Δ G_H* increases with the increase of the coverage of oxygen atoms. The slightly oxidized surface Ni atoms are theoretically identified to be the best catalytic centers for the electrocatalytic HERs when the coverage of oxygen is considerably low. On the basis of the analyses of Bader charge distribution and density of states, our results reveal that the superior performance of the slightly oxidized surface Ni atoms can be ascribed to the optimal electronic properties.

Enhancing the Photocatalytic Performance of MXenes via Stoichiometry Engineering of Their Electronic and Optical Properties

Combining both density functional theory and the cluster expansion method, we investigate 3 binary MXene alloy systems of semiconducting Ti₂CO₂, Zr₂CO₂, and Hf₂CO₂, where the transition metals substitute one another (i.e., Ti_{2(1- x)}Zr_{2 x}CO₂, Ti_{2(1- x)}Hf_{2 x}CO₂, and Zr_{2(1- x)}Hf_{2 x}CO₂). We show that this group of MXene alloys forms the solid-solution phase across all compositions. Special quasirandom structures are generated to model the solid-solution phase of these alloys, using which we demonstrate how their structural, mechanical, electronic, and optical properties are tuned via stoichiometry engineering. These alloys exhibit outstanding mechanical strength and stability. They possess indirect band gaps of 1.25-1.80 eV. For Ti_{2(1- x)}Zr_{2 x}CO₂ and Ti_{2(1- x)}Hf_{2 x}CO₂, they display higher absorbance in the solar spectrum than their constituent Zr₂CO₂ and Hf₂CO₂, respectively. Most of the MXene alloys also show appropriately aligned band edges for water splitting. We predict the Ti_{2(1- x)}Zr_{2 x}CO₂ alloy with x = 0.2778 to be the most promising water-splitting photocatalyst among the MXenes studied here, outperforming its constituents, Ti₂CO₂ and Zr₂CO₂, when solar absorbance performance and band-edge alignments are simultaneously considered. This work demonstrates that alloying can be used to effectively tune photocatalytic performance.

Pt decorated MoS2 nanoflakes for ultrasensitive resistive humidity sensor

In this work, we report the fabrication of a low power, humidity sensor where platinum nanoparticles (NPs) decorated few-layered molybdenum disulphide (MoS2) nanoflakes have been used as the sensing layer. A mixed solvent was used to exfoliate the nanoflakes from the bulk powder. Then the Pt/MoS2 composites were prepared by reducing Pt NPs from chloroplatinic acid hexahydrate using a novel reduction technique using sulphide salt. The successful reduction and composite preparation were confirmed using various material characterization tools like scanning electron microscopy, atomic force microscopy, transmission electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, Raman spectroscopy and UV-visible spectroscopy. The humidity sensors were prepared by drop-coating the Pt-decorated MoS2 on gold interdigitated electrodes and then exposed to various levels of relative humidity (RH). Composites with different weight ratios of Pt were tested and the best response was shown by the Pt/MoS2 (0.25:1) sample with a record high response of ∼4000 times at 85% RH. The response and recovery times were ∼92 s and ∼154 s respectively with repeatable behaviour. The sensor performance was found to be stable when tested over a few months. The underlying sensing mechanisms along with detailed characterization of the various composites have been discussed.

Ruthenium-Tungsten Composite Catalyst for the Efficient and Contamination-Resistant Electrochemical Evolution of Hydrogen

A new catalyst, prepared by a simple physical mixing of ruthenium (Ru) and tungsten (W) powders, has been discovered to interact synergistically to enhance the electrochemical hydrogen evolution reaction (HER). In an aqueous 0.5 M H₂SO₄ electrolyte, this catalyst, which contained a miniscule loading of 2-5 nm sized Ru nanoparticles (5.6 μg Ru per cm² of geometric surface area of the working electrode), required an overpotential of only 85 mV to drive 10 mA/cm² of H₂ evolution. Interestingly, our catalyst also exhibited good immunity against deactivation during HER from ionic contaminants, such as Cu²⁺ (over 24 h). We unravel the mechanism of synergy between W and Ru for catalyzing H₂ evolution using Cu underpotential deposition, photoelectron spectroscopy, and density functional theory (DFT) calculations. We found a decrease in the d-band and an increase in the electron work function of Ru in the mixed composite, which made it bind to H more weakly (more Pt-like). The H-adsorption energy on Ru deposited on W was found, by DFT, to be very close to that of Pt(111), explaining the improved HER activity.

Interlayer-expanded and defect-rich metal dichalcogenide (MX2) nanosheets for active and stable hydrogen evolution

A series of interlayer-expanded and defect-rich MX₂ nanosheets with abundant active edge sites are synthesized and demonstrated as efficient electrocatalysts for superior hydrogen evolution.

Independent tuning of size and coverage of supported Pt nanoparticles using atomic layer deposition

Synthetic methods that allow for the controlled design of well-defined Pt nanoparticles are highly desirable for fundamental catalysis research. In this work, we propose a strategy that allows precise and independent control of the Pt particle size and coverage. Our approach exploits the versatility of the atomic layer deposition (ALD) technique by combining two ALD processes for Pt using different reactants. The particle areal density is controlled by tailoring the number of ALD cycles using trimethyl(methylcyclopentadienyl)platinum and oxygen, while subsequent growth using the same Pt precursor in combination with nitrogen plasma allows for tuning of the particle size at the atomic level. The excellent control over the particle morphology is clearly demonstrated by means of in situ and ex situ X-ray fluorescence and grazing incidence small angle X-ray scattering experiments, providing information about the Pt loading, average particle dimensions, and mean center-to-center particle distance.

The performance of supported nanoparticle catalysts is closely related to their size, shape and interparticle distance. Here, the authors introduce an atomic layer deposition-based strategy to independently tune the size and coverage of platinum nanoparticles with atomic-level precision.

Three-Dimensional Dendritic Structures of NiCoMo as Efficient Electrocatalysts for the Hydrogen Evolution Reaction

First-row (3d) transition-metal catalysts, such as bimetallic Ni-Co, represent an emerging class of electrocatalysts for HER, but they usually suffer from a large overpotential significantly above thermodynamic demands. Here, we doped NiCo catalyst with non3d metals molybdenum (Mo) for improvement in catalyzing the hydrogen evolution reaction. The ternary catalyst was readily obtained by a one-pot process via the sequential electrodeposition of Ni, Co, and Mo precursors on titanium (Ti) support. By tailing the deposition conditions, we fabricated NiCoMo catalysts with three-dimensional dendritic structures, exhibiting large amounts of electrochemically active sites. To attain the benchmark HER current density of -10 mA cm^-2, an overpotential of ∼132 mV is required in 0.1 M KOH for the Mo-doped NiCo (5 atom % Mo in bath), and they produced the decreasing in Tafel slope of ∼108 mV decade^-1 exceeding those of binary NiCo alloy catalysts and other contents of Mo doping. In a synergistic effect, dopant incorporation of Mo element may provide near-optimal adsorption energies for HER intermediates promoting the process of water dissociation and hydrogen intermediates production and binding into molecular hydrogen.

High-Throughput Survey of Ordering Configurations in MXene Alloys Across Compositions and Temperatures

2D transition metal carbides and nitrides known as MXenes are gaining increasing attention. About 20 of them have been synthesized (more predicted) and their applications in fields ranging from energy storage and electromagnetic shielding to medicine are being explored. To facilitate the search for double-transition-metal MXenes, we explore the structure-stability relationship for 8 MXene alloy systems, namely, (V_1-xMo_x)₃C₂, (Nb_1-xMo_x)₃C₂, (Ta_1-xMo_x)₃C₂, (Ti_1-xMo_x)₃C₂, (Ti_1-xNb_x)₃C₂, (Ti_1-xTa_x)₃C₂, (Ti_1-xV_x)₃C₂, and (Nb_1-xV_x)₃C_2, with 0 ≤ x ≤ 1, using high-throughput computations. Starting from density-functional theory calculated formation energies, we used the cluster expansion method to build quick-to-compute interactions, enabling us to scan through the formation energies of millions of alloying configurations. For the Mo-rich MXenes, (M1_1-xMo_x)₃C₂ (where M1: Ti, V, Nb, Ta) Mo atoms prefer to occupy the surface layers, and ordering persists to high temperatures, based on our Monte Carlo simulations. When Ti is alloyed with Nb or Ta, in the Ti-rich MXenes, Ti atoms prefer the surface layers (e.g., Ti-C-Nb-C-Ti sequence), and in the Nb- or Ta-rich MXenes, Ti occupies only one surface layer and the other two layers are Nb or Ta (e.g., Ti-C-Nb-C-Nb), exhibiting asymmetric ordering. However, alloying Ti with V results in solid solutions across all compositions. (Nb_1-xV_x)₃C₂ phase separates at lower temperatures but forms solid solutions at synthesis temperatures. Postsynthesis annealing at moderate temperatures (800 to 1000 K) increases the ordering for all the compositions. Lastly, by investigating the stability of their precursor MAX phases and surface-terminated MXenes, we discuss the synthesis possibilities of highly ordered MXenes.

Peptide Cross-linkers: Immobilization of Platinum Nanoparticles Highly Dispersed on Graphene Oxide Nanosheets with Enhanced Photocatalytic Activities

For exerting potential catalytic and photocatalytic activities of metal nanoparticles (MNPs), immobilization of MNPs on a support medium in highly dispersed state is desired. In this Research Article, we demonstrated that surfactant-free platinum nanoparticles (PtNPs) were efficiently immobilized on graphene oxide (GO) nanosheets in a highly dispersed state by utilizing oligopeptide β-sheets as a cross-linker. The fluorenyl-substituted peptides were designed to form β-sheets, where metal-binding thiol groups and protonated and positively charged amino groups are integrated on the opposite sides of the surface of a β-sheet, which efficiently bridge PtNPs and GO nanosheet. In comparison to PtNP/GO composite without the peptide linker, the PtNP/peptide/GO ternary complex exhibited excellent photocatalytic dye degradation activity via electron transfer from GO to PtNP and simultaneous hole transfer from oxidized GO to the dye. Furthermore, the ternary complex showed photoinduced hydrogen evolution upon visible light irradiation using a hole scavenger. This research provides a new methodology for the development of photocatalytic materials by a bottom-up strategy on the basis of self-assembling features of biomolecules.

Facile Synthesis of Vanadium-Doped Ni3S2 Nanowire Arrays as Active Electrocatalyst for Hydrogen Evolution Reaction

Ni₃S₂ nanowire arrays doped with vanadium(V) are directly grown on nickel foam by a facile one-step hydrothermal method. It is found that the doping can promote the formation of Ni₃S₂ nanowires at a low temperature. The doped nanowires show excellent electrocatalytic performance toward hydrogen evolution reaction (HER), and outperform pure Ni₃S₂ and other Ni₃S₂-based compounds. The stability test shows that the performance of V-doped Ni₃S₂ nanowires is improved and stabilized after thousands of linear sweep voltammetry test. The onset potential of V-doped Ni₃S₂ nanowire can be as low as 39 mV, which is comparable to platinum. The nanowire has an overpotential of 68 mV at 10 mA cm^-2, a relatively low Tafel slope of 112 mV dec^-1, good stability and high Faradaic efficiency. First-principles calculations show that the V-doping in Ni₃S₂ extremely enhances the free carrier density near the Fermi level, resulting in much improved catalytic activities. We expect that the doping can be an effective way to enhance the catalytic performance of metal disulfides in hydrogen evolution reaction and V-doped Ni₃S₂ nanowire is one of the most promising electrocatalysts for hydrogen production.

Functionalized platinum nanoparticles with surface charge trigged by pH: synthesis, characterization and stability studies

In this work, the synthesis and characterization of functionalized platinum nanoparticles (PtNPs) have been investigated. PtNPs were obtained by a wet redox procedure using 2-diethylaminoethanethiol hydrochloride (DEA) as capping agent. By varying the Pt/thiol molar ratio, monodispersed and stable particles with diameters in the range of 3-40 nm were isolated. The amino functionality allows neutral particles to be obtained in basic water solution and positive charged nanoparticles in neutral or acidic water solution (pH 7-2), as confirmed by DLS and ζ-potential measurements. FTIR spectroscopy, FE-SEM, DLS and ζ-potential measurements confirmed the size and showed long term water stability (up to three months) of the colloidal system.