Nanoscale Transformations of Alumina-Supported AuCu Ordered Phase Nanocrystals and Their Activity in CO Oxidation

Structural Evolution of Anatase-Supported Platinum Nanoclusters into a Platinum-Titanium Intermetallic Containing Platinum Single Atoms for Enhanced Catalytic CO Oxidation

Strong metal-support interactions characteristic of the encapsulation of metal particles by oxide overlayers have been widely observed on large metal nanoparticles, but scarcely occur on small nanoclusters (<2 nm) for which the metal-support interactions remain elusive. Herein, we study the structural evolution of Pt nanoclusters (1.5 nm) supported on anatase TiO₂ upon high-temperature H₂ reduction. The Pt nanoclusters start to partially evolve into a CsCl-type PtTi intermetallic compound when the reduction temperature reaches 400 °C. Upon 700 °C reduction, the PtTi nanoparticles are exclusively formed and grow epitaxially along the TiO₂ (101) crystal faces. The thermodynamics of the formation of PtTi via migration of reduced Ti atoms into Pt cluster is unraveled by theoretical calculations. The thermally stable PtTi intermetallic compound, with single-atom Pt isolated by Ti, exhibits enhanced catalytic activity and promoted catalytic durability for CO oxidation.

Atomic-Scale Engineering of CuOx-Au Interfaces over AuCu Single-Nanoparticles

A face-centered tetragonal (fct) AuCu particle with a size of 7.1 nm and an Au/Cu molar ratio of 1/1 was coated by a silica shell of 6 nm thickness. Segregation of Cu atoms from the metal particle under an oxidative atmosphere precisely mediated the CuO_x-Au interfacial structure by simply varying the temperature. As raising the temperature from 473 to 773 K, more Cu atoms emigrated from the AuCu particle and were oxidized into CuO_x layers that grew up to 0.8 nm in thickness. Simultaneously, the size of the Au-rich particle lowered moderately while the crystalline structure transformed from the fct phase into the face-centered cubic (fcc) phase. The CuO_x-Au interface shifted from the CuO_x monolayer bound to Au single-atoms to Au@CuO_x core-shell geometry, while the catalytic activity for CO oxidation at 433 K decreased dramatically. Moreover, a sharp loss in activity was observed as the crystal-phase transition occurred. This change in catalytic performance was ascribed to the geometrical configuration at the interfacial sites: the synergetic effect between the fct-AuCu particle and CuO_x monolayer contributed to the much higher activity, whereas the fcc-AuCu/Au particle weakened its interaction with the thicker CuO_x layer and thus decreased the activity.

Nanoarchitectonics of g-C3N4 Nanosheets with a AuCu Enhancement Effect for Superior Photo- and Electrochemical Activity

AuCu alloy nanoparticles (NPs) were embedded in superior thin g-C₃N₄ nanosheets by a mechanochemical pre-reaction and subsequent thermal polymerization at high temperature. The introduction of AuCu NPs increased conductivity, decreased the band gap, expended light absorption, and improved the separation and transfer efficiencies of photogenerated electrons and holes. Moreover, the uniform distribution of AuCu NPs in g-C₃N₄ nanosheets is ascribed to the pre-reaction of bulk g-C₃N₄ and metal salts to create activity cites. The adsorption ability in the visible light region was improved due to the plasma effect of Au. AuCu/g-C₃N₄ composites (AuCu/CN-1%) with optimized component ratios revealed the highest transient photocurrent responses, the lowest electrochemical impedance arc radius, and the best photocatalytic H₂ evolution rate of 930.2 μmol g^-1 h^-1. These findings exhibited that loading AuCu bimetallic NPs could efficiently offset some disadvantages of g-C₃N₄ and improve its photocatalytic performances.

Towards universal neural network potential for material discovery applicable to arbitrary combination of 45 elements

Computational material discovery is under intense study owing to its ability to explore the vast space of chemical systems. Neural network potentials (NNPs) have been shown to be particularly effective in conducting atomistic simulations for such purposes. However, existing NNPs are generally designed for narrow target materials, making them unsuitable for broader applications in material discovery. Here we report a development of universal NNP called PreFerred Potential (PFP), which is able to handle any combination of 45 elements. Particular emphasis is placed on the datasets, which include a diverse set of virtual structures used to attain the universality. We demonstrated the applicability of PFP in selected domains: lithium diffusion in LiFeSO4F, molecular adsorption in metal-organic frameworks, an order-disorder transition of Cu-Au alloys, and material discovery for a Fischer-Tropsch catalyst. They showcase the power of PFP, and this technology provides a highly useful tool for material discovery.

Atmosphere-Induced Transient Structural Transformations of Pd-Cu and Pt-Cu Alloy Nanocrystals

We have investigated the transformations of colloidal Pd-Cu and Pt-Cu bimetallic alloy nanocrystals (NCs) supported on γ-Al₂O₃ when exposed to a sequence of oxidizing and then reducing atmospheres, in both cases at high temperature (350 °C). A combination of in situ diffuse reflectance infrared Fourier transform spectroscopy and X-ray absorption spectroscopy was employed to probe the NC surface chemistry and structural/compositional variations in response to the different test conditions. Depending on the type of noble metal in the bimetallic NCs (whether Pd or Pt), different outcomes were observed. The oxidizing treatment on Pd-Cu NCs led to the formation of a PdCuO mixed oxide and PdO along with a minor fraction of CuO _x species on the support. The same treatment on Pt-Cu NCs caused a complete dealloying between Pt and Cu, forming separate Pt NCs with a minor fraction of PtO NCs and CuO _x species, the latter finely dispersed on the support. The reducing treatment that followed the oxidizing treatment largely restored the Pd-Cu alloy NCs, although with a residual fraction of CuO _x species remaining. Similarly, Pt-Cu NCs were partially restored but with a large fraction of CuO _x species still located on the support. Our results indicate that the noble metal present in the bimetallic Cu-based alloy NCs has a strong influence on the dealloying/migrations/realloying processes occurring under typical heterogeneous catalytic reactions, elucidating the structural/compositional variations of these NCs depending on the atmospheres to which they are exposed.

Designing Nanoparticles and Nanoalloys for Gas-Phase Catalysis with Controlled Surface Reactivity Using Colloidal Synthesis and Atomic Layer Deposition

Supported nanoparticles are commonly applied in heterogeneous catalysis. The catalytic performance of these solid catalysts is, for a given support, dependent on the nanoparticle size, shape, and composition, thus necessitating synthesis techniques that allow for preparing these materials with fine control over those properties. Such control can be exploited to deconvolute their effects on the catalyst's performance, which is the basis for knowledge-driven catalyst design. In this regard, bottom-up synthesis procedures based on colloidal chemistry or atomic layer deposition (ALD) have proven successful in achieving the desired level of control for a variety of fundamental studies. This review aims to give an account of recent progress made in the two aforementioned synthesis techniques for the application of controlled catalytic materials in gas-phase catalysis. For each technique, the focus goes to mono- and bimetallic materials, as well as to recent efforts in enhancing their performance by embedding colloidal templates in porous oxide phases or by the deposition of oxide overlayers via ALD. As a recent extension to the latter, the concept of area-selective ALD for advanced atomic-scale catalyst design is discussed.

Gas-assisted transformation of gold from fcc to the metastable 4H phase

The metastable hexagonal 4H-phase gold has recently attracted extensive interest due to its exceptional performance in catalysis. However, gold usually crystallizes to its lowest free energy structure called face-centered cubic (fcc). The phase transformation from the stable fcc phase to the metastable 4H phase is thus of great significance in crystal phase engineering. Herein, we report this unusual phenomenon on a 4H gold nanorod template with the aid of CO gas and an electron beam. In situ transmission electron microscopy was used to directly visualize the interface propagation kinetics between the 4H-Au-nanorod and fcc-Au nanoparticle. Epitaxial growth was initiated at the contact interface, and then propagated to convert all parts of these fcc nanoparticles to 4H phase. Density functional theory calculations and ab initio molecular dynamics simulations show that the CO molecules can assist the Au diffusion process and promote the flexibility of Au particles during the epitaxial growth. The phase transformation was driven by the reduction of Gibbs free energy by eliminating the interface between fcc and 4H phases.

Crystal phase engineering enables the growth of nanostructures with controlled crystal phases that show superior functional properties. Here, the authors find that CO gas-metal atom interactions combined with the electron beam can trigger phase transformations of precious metals at room temperature.

Pt2+-Exchanged ZIF-8 nanocube as a solid-state precursor for L10-PtZn intermetallic nanoparticles embedded in a hollow carbon nanocage

Nanoparticles with an atomically ordered alloy phase have received enormous attention for application as catalysts in fuel cells because of their unique electronic properties resulting from unusually strong d-orbital interactions between two metal components. However, the synthesis of intermetallic nanoparticles requires a high reaction temperature, thus necessitating the protection of nanoparticles with inorganic layers to prevent aggregation of nanoparticles during synthesis. The protective layer needs to be removed later for application as a catalyst, which is a cumbersome process. Herein, a novel synthetic strategy is reported for the preparation of L1₀-PtZn intermetallic nanoparticles by utilizing Pt²⁺-exchanged ZIF-8 nanocubes as a solid-state precursor. The Pt²⁺-exchanged ZIF-8 phase plays a dual role as a metal ion source for L1₀-PtZn nanoparticles and as a carbonaceous matrix that restrains the aggregation of nanoparticles during thermal treatment. The L1₀-PtZn nanoparticles embedded in a hollow carbon nanocage obtained from one-step annealing of Pt²⁺-exchanged ZIF-8 showed better electrocatalytic activity and durability toward methanol oxidation under acidic electrolyte conditions than those obtained from commercial Pt/C catalysts.

Atomic-Scale Observation of Bimetallic Au-CuOx Nanoparticles and Their Interfaces for Activation of CO Molecules

Supported gold nanoparticles with sizes below 5 nm display attractive catalytic activities for heterogeneous reactions, particularly those promoted by secondary metal (e.g., Cu) because of the well-defined synergy between metal compositions. However, the specific atomic structure at interfaces is less interpreted systematically. In this work, various bimetallic Au-CuO_x catalysts with specific surface structures were synthesized and explored by aberration-corrected scanning transmission electron microscopy (AC-STEM), temperature-programmed experiments and in situ DRIFT experiments. Results suggest that the atomic structure and interfaces between gold and CuO_x are determined by the nucleation behaviors of the nanoparticles and result in subsequently the distinctive ability for CO activation. Bimetallic CuO*/Au sample formatted by gold particles surrounded with CuO_x nanoclusters have rough surface with prominently exposed low-coordinated Au step defects. Whereas the bimetallic Au@CuO sample formatted by copper precursor in the presence of gold nanoparticles have core-shell structure with relatively smooth surface. The former structure of CuO*/Au displays much accelerated properties for CO adsorption and activation with 90% CO converted to CO₂ at 90 °C and nice stability with time on stream. The results clearly determine from atomic scale the significance of exposed gold step sites and intrinsic formation of defected surface by different nucleation. The above properties are directly responsible for the induced variation in chemical composition and the catalytic activity.

Gold nanomaterials as key suppliers in biological and chemical sensing, catalysis, and medicine

BACKGROUND

Gold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings.

SCOPE OF REVIEW

The chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed.

MAJOR CONCLUSIONS

AuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods.

GENERAL SIGNIFICANCE

This review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner.

Catalytic Chemistry Predicted by a Charge Polarization Descriptor: Synergistic O2 Activation and CO Oxidation by Au-Cu Bimetallic Clusters on TiO2(101)

The versatile properties of bimetallic nanoparticles greatly expand the range of catalyzed chemical reactions. We demonstrate that surface chemistry can be understood and predicted using a simple adsorbate-surface interaction descriptor that relates charge polarization to chemical reactivity. Our density functional theory studies of O₂ activation and CO oxidation catalyzed by Au₇-Cu₁ bimetallic nanoparticles supported on the TiO₂(101) surface demonstrate that the generated oxidized Cu atom (CuO _x) can efficiently inhibit the aggregation of the active Cu sites. Moreover, because of the strong dipole-dipole interaction between the surface and the adsorbate on the oxidized Cu site, the adsorption of CO + O₂/CO + O can be significantly enhanced, which can decrease the CO oxidation barriers and further improve catalytic performance. The product of the two electric dipole moments provides a parameter that allows us to predict the key catalytic properties for different adsorption sites and reaction pathways. The reported findings provide important insights into the mechanism of chemical reactivity of metallic clusters and generate a valuable principle for catalyst design.

Gold-Copper Aerogels with Intriguing Surface Electronic Modulation as Highly Active and Stable Electrocatalysts for Oxygen Reduction and Borohydride Oxidation

We, for the first time, report the successful synthesis of self-assembled AuCu aerogels by a one-pot kinetically controlled approach. A startling electronic modulation effect of Cu on Au was observed across the entire alloy composition range, for which the optimal upshift of the d-band center for the highest activities was 0.24 eV. Owing to the combination of a nanoporous architecture and a robust electronic effect, the Au₅₂ Cu₄₈ aerogels exhibited better catalytic performance for the oxygen reduction reaction (ORR) and the direct borohydride oxidation reaction (BOR) than commercial Pt/C catalysts. The specific and mass ORR activities were 4.5 and 6.3 times higher, respectively, on the Au₅₂ Cu₄₈ aerogels than on Pt/C with negligible activity decay even after 10 000 cycles and a duration of 40 000 s. For the BOR, the Au₅₂ Cu₄₈ aerogels also exhibited far better selectivity and activity than Pt/C. The new AuCu aerogels show great potential as a promising alternative for Pt-based catalysts in fuel cells.

Performance of Preformed Au/Cu Nanoclusters Deposited on MgO Powders in the Catalytic Reduction of 4-Nitrophenol in Solution

The deposition of preformed nanocluster beams onto suitable supports represents a new paradigm for the precise preparation of heterogeneous catalysts. The performance of the new materials must be validated in model catalytic reactions. It is shown that gold/copper (Au/Cu) nanoalloy clusters (nanoparticles) of variable composition, created by sputtering and gas phase condensation before deposition onto magnesium oxide powders, are highly active for the catalytic reduction of 4-nitrophenol in solution at room temperature. Au/Cu bimetallic clusters offer decreased catalyst cost compared with pure Au and the prospect of beneficial synergistic effects. Energy-dispersive X-ray spectroscopy coupled with aberration-corrected scanning transmission electron microscopy imaging confirms that the Au/Cu bimetallic clusters have an alloy structure with Au and Cu atoms randomly located. Reaction rate analysis shows that catalysts with approximately equal amounts of Au and Cu are much more active than Au-rich or Cu-rich clusters. Thus, the interplay between the Au and Cu atoms at the cluster surface appears to enhance the catalytic activity substantially, consistent with model density functional theory calculations of molecular binding energies. Moreover, the physically deposited clusters with Au/Cu ratio close to 1 show a 25-fold higher activity than an Au/Cu reference sample made by chemical impregnation.

A Monodispersed Spherical Zr-Based Metal-Organic Framework Catalyst, Pt/Au@Pd@UIO-66, Comprising an Au@Pd Core-Shell Encapsulated in a UIO-66 Center and Its Highly Selective CO2 Hydrogenation to Produce CO

A Zr-based metal-organic framework (MOF) catalyst, Pt/Au@Pd@UIO-66, is assembled, where UIO-66 is Zr₆ O₄ (OH)₄ (BDC)₆ (BDC = 1,4-benzenedicarboxylate). The gold nanoparticles (NPs) act as the core for the epitaxial growth of Pd shells, and the core-shell monodispersed nanosphere Au@Pd is encapsulated into UIO-66 to control its morphology and impart nanoparticle functionality. The microporous nature of UIO-66 assists the adsorption of Pt NPs, which in turn enhances the interaction between NPs and UIO-66, favoring the formation of isolated and well-dispersed Pt NP active sites. This MOF exhibits high catalytic activity and CO product selectivity for the reverse-water-gas-shift reaction in a fixed-bed flow reactor.

Manipulating the morphology of the nano oxide domain in AuCu–iron oxide dumbbell-like nanocomposites as a tool to modify magnetic properties

We highlighted the effects of oleic acid on the structural and magnetic properties of colloidal nanodumbbells.

Insight into the chemical adsorption properties of CO molecules supported on Au or Cu and hybridized Au-CuO nanoparticles

Although nanosized Au clusters have been well developed for many applications, fundamental understanding of their adsorption/activation behaviors in catalytic applications is still lacking, especially when other elements provide promotion or hybridization functions. Au hybridized with Cu element is a highly investigated system; Cu is in the same element group as Au and thus displays similar physicochemical properties. However, their hybrids are not well understood in terms of their chemical states and adsorption/activation properties. In this work, typical γ-Al₂O₃-supported Au and CuO as well as Au-CuO nanoparticles were prepared and characterized to explore their adsorption/activation properties in depth using CO as a probe molecule using advanced techniques, such as XPS, HR-TEM, temperature programmed experiments and operando DRIFT combined with mass spectra. It was found that gold and copper can both act as active sites during CO adsorption and activation. The CO-TPD and operando DRIFT results also revealed that CO molecules were able to react with surface oxygenated species, resulting in the direct formation of CO₂ over the three samples in the absence of gaseous O₂. The gold step sites (Au^step) participated more readily in the reaction, especially under gaseous O₂-free conditions. During adsorption, CO molecules were more preferentially adsorbed on Au⁰ sites at lower temperature comparing with those on the Cu⁰ sites. However, competitive adsorption occurred between CO adsorbed on Au⁰ and Cu⁰ with increased reaction temperature, and the synergy between the Au and Cu compositions was too strong to suppress the adsorption and activation of the CO molecules. The dynamic adsorption equilibrium over 120 °C to 200 °C resulted in the appearance of a hysteresis performance platform.

Order-disorder phase transitions in Au-Cu nanocubes: from nano-thermodynamics to synthesis

Catalysts have been widely used in industries and can be optimized by tuning the composition and chemical ordering of the elements involved in the nano-alloy. Among bi-metallic alloys, the Au-Cu system is of particular interest because it exhibits ordered phases at low temperatures. Nevertheless, the temperature at which these ordered structures are formed is totally unknown at the nanoscale. Consequently, to speed up the development of these catalysts, this paper theoretically predicts the structural phase transitions between ordered and disordered phases for the Au-Cu system by using nano-thermodynamics. Following the predictions, the suggested annealing temperatures have been carefully chosen and consequently, Au-Cu ordered nanocubes have been successfully synthesized through a solventless protocol. The results are fully supported by electron microscopy observations.

Intermetallic Nanocrystals: Syntheses and Catalytic Applications

At the forefront of nanochemistry, there exists a research endeavor centered around intermetallic nanocrystals, which are unique in terms of long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure. In contrast to alloy nanocrystals with no elemental ordering, it is challenging to synthesize intermetallic nanocrystals with a tight control over their size and shape. Here, recent progress in the synthesis of intermetallic nanocrystals with controllable sizes and well-defined shapes is highlighted. A simple analysis and some insights key to the selection of experimental conditions for generating intermetallic nanocrystals are presented, followed by examples to highlight the viable use of intermetallic nanocrystals as electrocatalysts or catalysts for various reactions, with a focus on the enhanced performance relative to their alloy counterparts that lack elemental ordering. Within the conclusion, perspectives on future developments in the context of synthetic control, structure-property relationships, and applications are discussed.

Dumbbell-like Au0.5Cu0.5@Fe3O4 Nanocrystals: Synthesis, Characterization, and Catalytic Activity in CO Oxidation

We report the colloidal synthesis of dumbbell-like Au_0.5Cu_0.5@Fe₃O₄ nanocrystals (AuCu@FeOx NCs) and the study of their properties in the CO oxidation reaction. To this aim, the as-prepared NCs were deposited on γ-alumina and pretreated in an oxidizing environment to remove the organic ligands. A comparison of these NCs with bulk Fe₃O₄-supported AuCu NCs showed that the nanosized support was far more effective in preventing the sintering of the metal domains, leading thus to a superior catalytic activity. Nanosizing of the support could be thus an effective, general strategy to improve the thermal stability of metallic NCs. On the other hand, the support size did not affect the chemical transformations experienced by the AuCu NCs during the activation step. Independently from the support size, we observed indeed the segregation of Cu from the alloy phase under oxidative conditions as well as the possible incorporation of the Cu atoms in the iron oxide domain.

Au1−xCux colloidal nanoparticles synthesized via a one-pot approach: understanding the temperature effect on the Au : Cu ratio

Au_1−xCu_x alloy nanoparticles synthesized by one-pot colloidal method with an accurate control of composition by the temperature and insights about the mechanism.

High-surface-area activated red mud supported Co3O4 catalysts for efficient catalytic oxidation of CO

Red mud is activated and employed as the support of Co₃O₄ catalysts, exhibiting high catalytic activity for low-temperature CO oxidation.