Microbial resistance to heavy metals

Potentially toxic elements in different tissues of great cormorant (Phalacrocorax carbo) at a wetland area

Concentrations of 4 potentially toxic elements (As, Cd, Hg, Pb) were investigated in the feather, liver, kidney, and bone of great cormorants (Phalacrocorax carbo). The tissue samples were taken at the Central Tisza - Jászság Nature Conservation Area in Hungary. They were analysed by inductively coupled plasma optical emission spectroscopy (ICP-OES). The goal of the investigation was to analyse the metal burden of the above-mentioned elements in the various tissues of these wild birds and to provide important information for monitoring the environmental pollution.Amongst the examined potentially toxic elements no statistical gender difference was observed, so the data were not separated based on them during the statistical analysis. The concentration of mercury was the highest in the feather, followed by the liver, kidney, and bone. The lead was detected in the feather with the highest level followed by the kidney, liver, and bone. The cadmium was determined in all investigated tissues with the next descending order: kidney > bone > liver > feather. Highest arsenic concentration was measured in the feather, followed by liver, kidney, and bone with the same concentration.The detected concentrations of the investigated potentially toxic elements in different tissues of great cormorants (feathers, liver, kidney, bone) means that the living area of this birds is not highly contaminated to induce health problems or toxic signs, or even other undesirable effect in the animals.

A contrast of Pb(II), Cd(II), and Cu(II) toxicities to Aspergillus niger through biochemical, morphological, and genetic investigations

The toxicity of metals to microorganisms is highly correlated with the type of metal used. However, the differences in the resistance mechanisms of filamentous fungi to multiple metals remain unclear. In this study, we investigated the responses of Aspergillus niger to three toxic metals, i.e., Pb²⁺, Cd²⁺, and Cu²⁺. Fungal growth and metabolism indices showed that A. niger had a higher tolerance to Pb²⁺ (>1000 mg L^-1) than to Cu²⁺ (300 mg L^-1) and Cd²⁺ (50 mg L^-1). An appropriate Pb²⁺ concentration (<500 mg L^-1) stimulated fungal growth and metabolic activity, whereas Cd²⁺ and Cu²⁺ stress showed continuously negative influences on fungal physiological parameters, such as biomass and secretion of oxalic acid. A. niger responded to Pb stress by constructing a new border layer around its cell wall. This pathway was also confirmed using RNA-seq analysis, i.e., the gene encoding cell wall α-1,3-glucan synthase was upregulated. This upregulation subsequently promoted the production of polysaccharides, which are the main components that support fungal cell walls. In contrast, the expression of genes encoding both AAA family ATPase and efflux pump antibiotic resistance proteins for Cd²⁺ and Cu²⁺ was significantly downregulated. Therefore, these findings elucidated the relatively complete fungal responses to different metal stresses.

Synthesis of silver nanoparticles from Indian red yeast rice and its inhibition of biofilm in copper metal in cooling water environment

The development of environmentally acceptable benign techniques using purely natural methods is a cost-effective procedure with long-term benefits in all areas. With this consideration, myco synthesized silver nano particles (AgNPs) were studied and it acted as an impending corrosion inhibitor in the environment. Initially, AgNPs were evaluated by physical and surface characterizations and this evidence demonstrated that RYRE's water-soluble molecules played an essential role in the synthesis of AgNPs in nano spherical size. The myco synthesized of AgNPs has showed an antibacterial activity against corrosive bacteria in cooling water system (CWS). Hence, the AgNPs were used in biocorrosion studies as an anticorrosive agent along with AgNO₃ and RYRE was also checked. For this experiment, the copper (Cu) metal (CW024) which is commonly used was selected, the result of corrosion rate was decreased, and inhibition efficiency (82%) was higher in the presence of AgNPs in system IV. Even though, AgNO₃ and RYRE had contributed significant inhibition efficiency on Cu at 47% and 61%, respectively. According to XRD, the reaction of AgNPs on Cu metal resulted in the formation of a protective coating of Fe₂O₃ against corrosion. EIS data also indicated that it could reduce the corrosion on the Cu metal surface. All of these findings point out the possibility that the myco-synthesized AgNPs were an effective copper metal corrosion inhibitor. As a result, we encourage the development of myco-synthesized AgNPs, which could be useful in the industrial settings.

Heavy metal-induced stress in eukaryotic algae-mechanisms of heavy metal toxicity and tolerance with particular emphasis on oxidative stress in exposed cells and the role of antioxidant response

Heavy metals is a collective term describing metals and metalloids with a density higher than 5 g/cm3. Some of them are essential micronutrients; others do not play a positive role in living organisms. Increased anthropogenic emissions of heavy metal ions pose a serious threat to water and land ecosystems. The mechanism of heavy metal toxicity predominantly depends on (1) their high affinity to thiol groups, (2) spatial similarity to biochemical functional groups, (3) competition with essential metal cations, (4) and induction of oxidative stress. The antioxidant response is therefore crucial for providing tolerance to heavy metal-induced stress. This review aims to summarize the knowledge of heavy metal toxicity, oxidative stress and antioxidant response in eukaryotic algae. Types of ROS, their formation sites in photosynthetic cells, and the damage they cause to the cellular components are described at the beginning. Furthermore, heavy metals are characterized in more detail, including their chemical properties, roles they play in living cells, sources of contamination, biochemical mechanisms of toxicity, and stress symptoms. The following subchapters contain the description of low-molecular-weight antioxidants and ROS-detoxifying enzymes, their properties, cellular localization, and the occurrence in algae belonging to different clades, as well as the summary of the results of the experiments concerning antioxidant response in heavy metal-treated eukaryotic algae. Other mechanisms providing tolerance to metal ions are briefly outlined at the end.

Bacterial Biofilm Formation on Nano-Copper Added PLA Suited for 3D Printed Face Masks

The COVID-19 Pandemic leads to an increased worldwide demand for personal protection equipment in the medical field, such as face masks. New approaches to satisfy this demand have been developed, and one example is the use of 3D printing face masks. The reusable 3D printed mask may also have a positive effect on the environment due to decreased littering. However, the microbial load on the 3D printed objects is often disregarded. Here we analyze the biofilm formation of Pseudomonas aeruginosa, Staphylococcus aureus, and Escherichia coli on suspected antimicrobial Plactive™ PLA 3D printing filaments and non-antimicrobial Giantarm™ PLA. To characterize the biofilm-forming potential scanning electron microscopy (SEM), Confocal scanning electron microscopy (CLSM) and colony-forming unit assays (CFU) were performed. Attached cells could be observed on all tested 3D printing materials. Gram-negative strains P. aeruginosa and E. coli reveal a strong uniform growth independent of the tested 3D filament (for P. aeruginosa even with stressed induced growth reaction by Plactive™). Only Gram-positive S. aureus shows strong growth reduction on Plactive™. These results suggest that the postulated antimicrobial Plactive™ PLA does not affect Gram-negative bacteria species. These results indicate that reusable masks, while better for our environment, may pose another health risk.

How Aquatic Chemistry Took Root and Has Flourished in China: Classical Textbooks, a Tale of Two Manganese, and a Dynamic Community

In the history of environmental science and engineering, there are numerous great thinkers, mentors, and scholars, whose influence transcends geographical boundaries. Being assembled into a special tribute issue in ES&T celebrating its founding editor Jim Morgan, this Perspective tells a few stories related to China, a country that he never visited but one where his research and vision have a profound influence. The following stories are inspiring accounts of people who made indelible contributions to this discipline. Through providing an international angle, this perspective aims to reinforce the global aquatic chemistry community's appreciation of our discipline's roots and continuous growth in China, as well as the significant contributions from China. Given the universality of scientific knowledge, we believe that similar stories exist in many other countries, cultures, and fields, where their pioneers are celebrated and remembered.

Mesoporous TiO2-based architectures as promising sensing materials towards next-generation biosensing applications

In the past two decades, mesoporous TiO2 has emerged as a promising material for biosensing applications. In particular, mesoporous TiO2 materials with uniform, well-organized pores and high surface areas typically exhibit superior biosensing performance, which includes high sensitivity, broad linear response, low detection limit, good reproducibility, and high specificity. Therefore, the development of biosensors based on mesoporous TiO2 has significantly intensified in recent years. In this review, the expansion and advancement of mesoporous TiO2-based biosensors for glucose detection, hydrogen peroxide detection, alpha-fetoprotein detection, immobilization of enzymes, proteins, and bacteria, cholesterol detection, pancreatic cancer detection, detection of DNA damage, kanamycin detection, hypoxanthine detection, and dichlorvos detection are summarized. Finally, the future perspective and research outlook on the utilization of mesoporous TiO2-based biosensors for the practical diagnosis of diseases and detection of hazardous substances are also given.

Mercuric pollution of surface water, superficial sediments, Nile tilapia (Oreochromis nilotica Linnaeus 1758 [Cichlidae]) and yams (Dioscorea alata) in auriferous areas of Namukombe stream, Syanyonja, Busia, Uganda

The mercury content and the contamination characteristics of water, sediments, edible muscles of a non-piscivorous fish (Oreochromis nilotica Linnaeus 1758 [Cichlidae]) and yams (Dioscorea alata) from Namukombe stream in Busia gold district of Uganda were evaluated. Human health risk assessment from consumption of contaminated fish and yams as well as contact with contaminated sediments from the stream were performed. Forty-eight (48) samples of water (n = 12), sediments (n = 12), fish (n = 12) and yams (n = 12) were taken at intervals of 10 m from three gold recovery sites located at up, middle and down sluices of the stream and analyzed for total mercury (THg) using US EPA method 1631. Results (presented as means  ±  standard deviations) showed that water in the stream is polluted with mercury in the range of < detection limit to 1.21  ±  0.040 mg/L while sediments contain mean THg from < detection limit to 0.14  ±  0.040 ugg^-1. Mean THg content of the edible muscles of O. nilotica ranged from < detection limit to 0.11 ± 0.014 ugg^-1while D. alata contained from < detection limit to 0.30  ±  0.173 ugg^-1mean THg. The estimated daily intake ranged from 0.0049 ugg^-1day^-1 to 0.0183 ugg^-1day^-1 and 0.0200 ugg^-1day^-1 to 0.0730 ugg^-1day^-1 for fish consumed by adults and children respectively. The corresponding health risk indices ranged from 0.0123 to 0.0458 and 0.0500 to 0.1830. Estimated daily intake was from 0.0042 ugg^-1day^-1 to 0.1279 ugg^-1day^-1 and 0.0130 ugg^-1day^-1 to 0.3940 ugg^-1day^-1 for D. alata consumed by adults and children respectively. The health risk indices recorded were from 0.011 to 0.320 and 0.033 to 0.985 for adults and children respectively. The mean THg content of the sediments, edible muscles of O. nilotica and D. alata were within acceptable WHO/US EPA limits. About 91.7% of the water samples had mean THg above US EPA maximum permissible limit for mercury in drinking water. Consumption of D. alata grown within 5 m radius up sluice of Namukombe stream may pose deleterious health risks as reflected by the health risk index of 0.985 being very close to one. From the pollution and risk assessments, mercury use should be delimited in Syanyonja artisanal gold mining areas. A solution to abolish mercury-based gold mining in the area needs to be sought as soon as possible to avert the accentuating health, economic and ecological disaster arising from the continuous discharge of mercury into the surrounding areas. Other mercury-free gold recovering methods such as use of borax, sluice boxes and direct panning should be encouraged. Waste management system for contaminated wastewater, used mercury bottles and tailings should be centralized.

Mediterranean Coastal Lagoons: The Importance of Monitoring in Sediments the Biochemical Composition of Organic Matter

Transitional water ecosystems are targeted by the European Union (EU) Water Framework Directive (WFD, CE 2000/60) monitoring programs in coastal zones. Concerning sediments, activities performed for the WFD focus on a few variables concerning the biochemical composition of organic matter. Our research reports the effects of oxygen availability on the biochemical composition of organic matter in sediments to highlight levels of targeted variables in time and, according to the depth of sediment layer, both under oxygenated and anoxic conditions in a mesocosm study on sediment cores. Results provide evidence that tested factors of interest (i.e., disturbance type, oxygenic versus anoxic conditions; persistence time of disturbance, 0-14 days; penetration through sedimentary layers, 0-10 cm depth) are able to significantly affect the biochemical composition of organic matter in sediments. Large part of the variables considered in this study (total organic carbon (TOC), total phosphorous (TP), total sulphur (TS), Fe, carbohydrates (CHO), total proteins (PRT), biopolymeric carbon (BPC), chlorophyll-a (Chl-a) are significantly affected and correlated to the oxygenation levels and could be good early indicators of important changes of environmental conditions. Monitoring activities performed under WFD guidelines and management strategies of Mediterranean coastal lagoon ecosystems shall include the biochemical composition of organic matter in sediment to provide an exhaustive picture of such dynamic ecosystems.

Population response of the estuarine copepod Eurytemora affinis to its bioaccumulation of trace metals

We evaluated the acute toxicities of metals cadmium (Cd), copper (Cu) and nickel (Ni) to a widely-distributed copepod Eurytemora affinis isolated from the Seine estuary. Both sexes of adult E. affinis were exposed separately to the three metals at concentration gradients to determine its 50% lethal concentration (LC50). After 4 days of exposure, both males and females showed a higher sensitivity to Cu (male LC50: 25.0 μg.L^-1 and female LC50: 38.0 μg.L^-1) than to Ni (male LC50: 90.0 μg.L^-1 and female 161.0 μg.L^-1) and Cd (male LC50: 127.8 μg.L^-1 and female LC50: 90.0 μg.L^-1). To assess for the first time, the extend of metal bioaccumulation and its effect at population scale, late stages (>200 μm) were collected and exposed to each metal at the concentration of 1/3 LC50, and to their mixture during 144 h without feeding. The Cd concentration consistently increased with time until the end of the experiment, whereas the Ni and Cu concentrations reached a plateau after 24 h and 72 h exposure, respectively. The results revealed that the copepods could accumulate Cu faster than Ni and Cd either in the treatment alone (0.58 L g^-1.d^-1) or in the three-metal mixture (0.72 L g^-1.d^-1) after 50% of exposure time (72 h). The number of individuals decreased in copepod populations except for the Cd treatment, where the number of nauplii increased. In addition, all treatments of metal exposure negatively affected bacterial densities in the copepod cultures, where the Cu treatment showed a negative remarkable effect compared with Cd and Ni treatment did.

Physiological characterization of Chlamydomonas reinhardtii acclimated to chronic stress induced by Ag, Cd, Cr, Cu and Hg ions

Acclimation to heavy metal-induced stress is a complex phenomenon. Among the mechanisms of heavy metal toxicity, an important one is the ability to induce oxidative stress, so that the antioxidant response is crucial for providing tolerance to heavy metal ions. The effect of chronic stress induced by ions of five heavy metals, Ag, Cu, Cr (redox-active metals) Cd, Hg (nonredox-active metals) on the green microalga Chlamydomonas reinhardtii was examined at two levels - the biochemical (content of photosynthetic pigments and prenyllipid antioxidants, lipid peroxidation) and the physiological (growth rate, photosynthesis and respiration rates, induction of nonphotochemical quenching of chlorophyll fluorescence). The expression of the genes which encode the enzymes participating in the detoxification of reactive oxygen species (APX1, CAT1, FSD1, MSD1) was measured. The other gene measured was one required for plastoquinone and α-tocopherol biosynthesis (VTE3). The application of heavy metal ions partly inhibited growth and biosynthesis of chlorophyll. The growth inhibition was accompanied by enhanced lipid peroxidation. An increase in the content of prenyllipid antioxidants was observed in cultures exposed to Cr2O7(2-), Cd(2+) (α- and γ-tocopherol and plastoquinone) and Cu(2+) (only tocopherols). The induction of nonphotochemical quenching was enhanced in cultures exposed to Cu(2+), Cr2O7(2-) and Cd(2+), as compared to the control. Chronic heavy metal-induced stress led to changes in gene expression dependent on the type and concentration of heavy metal ions. The up-regulation of antioxidant enzymes was usually accompanied by the up-regulation of the VTE3 gene.

Recovery of rare earth elements from the sulfothermophilic red alga Galdieria sulphuraria using aqueous acid

The demand for rare earth elements has increased dramatically in recent years because of their numerous industrial applications, and considerable research efforts have consequently been directed toward recycling these materials. The accumulation of metals in microorganisms is a low-cost and environmentally friendly method for the recovery of metals present in the environment at low levels. Numerous metals, including rare earth elements, can be readily dissolved in aqueous acid, but the efficiency of metal biosorption is usually decreased under the acidic conditions. In this report, we have investigated the use of the sulfothermophilic red alga Galdieria sulphuraria for the recovery of metals, with particular emphasis on the recovery of rare earth metals. Of the five different growth conditions investigated where G. sulphuraria could undergo an adaptation process, Nd(III), Dy(III), and Cu(II) were efficiently recovered from a solution containing a mixture of different metals under semi-anaerobic heterotrophic condition at a pH of 2.5. G. sulphuraria also recovered Nd(III), Dy(III), La(III), and Cu(II) with greater than 90% efficiency at a concentration of 0.5 ppm. The efficiency remained unchanged at pH values in the range of 1.5-2.5. Furthermore, at pH values in the range of 1.0-1.5, the lanthanoid ions were collected much more efficiently into the cell fractions than Cu(II) and therefore successfully separated from the Cu(II) dissolved in the aqueous acid. Microscope observation of the cells using alizarin red suggested that the metals were accumulating inside of the cells. Experiments using dead cells suggested that this phenomenon was a biological process involving specific activities within the cells.

Attenuation of chromium toxicity by bioremediation technology

Chromium is an important toxic environmental pollutant. Chromium pollution results largely from industrial activities, but other natural and anthropogenic sources also contribute to the problem. Plants that are exposed to environmental contamination by chromium are affected in diverse ways, including a tendency to suffer metabolic stress. The stress imposed by Cr exposure also extends to oxidative metabolic stress in plants that leads to the generation of active toxic oxygen free radicals. Such active free radicals degrade essential biomolecules and distort plant biological membranes. In this chapter, we describe sources of environmental chromium contamination, and provide information about the toxic impact of chromium on plant growth and metabolism. In addition, we address different phytoremediation processes that are being studied for use worldwide, in contaminated regions, to address and mitigate Cr pollution. There has been a long history of attempts to successfully mitigate the toxic effects of chromium-contaminated soil on plants and other organisms. One common approach, the shifting of polluted soil to landfills, is expensive and imposes environmental risks and health hazards of its own. Therefore, alternative eco-friendly bioremediation approaches are much in demand for cleaning chromium-polluted areas. To achieve its cleaning effects, bioremediation utilizes living organisms (bacteria, algae, fungi, and plants) that are capable of absorbing and processing chromium residues in ways which amend or eliminate it. Phytoremediation (bioremediation with plants) techniques are increasingly being used to reduce heavy metal contamination and to minimize the hazards of heavy metal toxicity. To achieve this, several processes, viz., rhizofiltration, phytoextraction, phytodetoxification, phytostabilization, and phytovolatilization, have been developed and are showing utility in practice, or promise. Sources of new native hyperaccumulator plants for use at contaminated sites are needed and constitute a key goal of ongoing phytoremediation research programs. Such new plants are needed to enhance the attractiveness of phytoremediation as an effective, affordable, and eco-friendly technique to achieve successful clean-up of metal-contaminated sites worldwide.

Effects of ferrous sulfate, inoculum history, and anionic form on lead, zinc, and copper toxicity to Acidithiobacillus caldus strain BC13

The current study reports the single and combined toxicities of Pb, Zn, and Cu to Acidithiobacillus caldus strain BC13. The observed half-maximal inhibitory concentrations (IC50), ± 95% confidence intervals, for Pb, Zn, and Cu were 0.9 ± 0.1 mM, 39 ± 0.5 mM, and 120 ± 8 mM, respectively. The observed minimum inhibitory concentrations (MIC) for Pb, Zn, and Cu were 7.5 mM, 75 mM, and 250 mM, respectively. When metals were presented in binary mixtures, the toxicities were less than additive. For example, when 50% of the Pb MIC and 50% of the Cu MIC were presented together, the specific growth rate was inhibited by only 59 ± 3%, rather than 100%. In addition, the presence of ferrous iron in the growth media decreased Pb and Zn toxicity to A. caldus strain BC13. The importance of inoculum history was evaluated by pre-adapting cultures through subsequent transfers in the presence of Pb, Zn, and Cu at their respective IC50s. After pre-adaptation, cultures had specific growth rates 39 ± 11, 32 ± 7, and 28 ± 12% higher in the presence of Pb, Zn, and Cu IC50s, respectively, compared with cultures that had not been pre-adapted. In addition, when cells exposed to the MICs of Pb, Zn, and Cu were harvested, washed, and re-inoculated into fresh, metal-free medium, they grew, showing that the cells remained viable with little residual toxicity. Finally, metal chlorides showed more toxicity than metal sulfates, and studies using sodium chloride or a mixture of metal sulfates and sodium chloride suggested that this was attributable to an additive combination of the metal and chloride toxicities.

Hydrogen enhances nickel tolerance in the purple sulfur bacterium Thiocapsa roseopersicina

A common microbial strategy for detoxifying metals involves redox transformation which often results in metal precipitation and/or immobilization. In the present study, the influence of ionic nickel [Ni(II)] on growth of the purple sulfur bacterium Thiocapsa roseopersicina was investigated. The results suggest that Ni(II) in the bulk medium at micromolar concentrations results in growth inhibition, specifically an increase in the lag phase of growth, a decrease in the specific growth rate, and a decrease in total protein concentration when compared to growth controls containing no added Ni(II). The inhibitory effects of Ni(II) on the growth of T. roseopersicina could be partially overcome by the addition of hydrogen (H(2)) gas. However, the inhibitory effects of Ni(II) on the growth of T. roseopersicina were not alleviated by H(2) in a strain containing deletions in all hydrogenase-encoding genes. Transmission electron micrographs of wild-type T. roseopersicina grown in the presence of Ni(II) and H(2) revealed a significantly greater number of dense nanoparticulates associated with the cells when compared to wild-type cells grown in the absence of H(2) and hydrogenase mutant strains grown in the presence of H(2). X-ray diffraction and vibrating sample magnetometry of the dense nanoparticles indicated the presence of zerovalent Ni, suggesting Ni(II) reduction. Purified T. roseopersicina hyn-encoded hydrogenase catalyzed the formation of zerovalent Ni particles in vitro, suggesting a role for this hydrogenase in Ni(II) reduction in vivo. Collectively, these results suggest a link among H(2) metabolism, Ni(II) tolerance, and Ni(II) reduction in T. roseopersicina .

Survival and growth in the presence of elevated copper: transcriptional profiling of copper-stressed Pseudomonas aeruginosa

Transcriptional profiles of Pseudomonas aeruginosa exposed to two separate copper stress conditions were determined. Actively growing bacteria subjected to a pulse of elevated copper for a short period of time was defined as a "copper-shocked" culture. Conversely, copper-adapted populations were defined as cells actively growing in the presence of elevated copper. Expression of 405 genes changed in the copper-shocked culture, compared to 331 genes for the copper-adapted cultures. Not surprisingly, there were genes identified in common to both conditions. For example, both stress conditions resulted in up-regulation of genes encoding several active transport functions. However, there were some interesting differences between the two types of stress. Only copper-adapted cells significantly altered expression of passive transport functions, down-regulating expression of several porins belonging to the OprD family. Copper shock produced expression profiles suggestive of an oxidative stress response, probably due to the participation of copper in Fenton-like chemistry. Copper-adapted populations did not show such a response. Transcriptional profiles also indicated that iron acquisition is fine-tuned in the presence of copper. Several genes induced under iron-limiting conditions, such as the siderophore pyoverdine, were up-regulated in copper-adapted populations. Interesting exceptions were the genes involved in the production of the siderophore pyochelin, which were down-regulated. Analysis of the copper sensitivity of select mutant strains confirmed the array data. These studies suggest that two resistance nodulation division efflux systems, a P-type ATPase, and a two-component regulator were particularly important for copper tolerance in P. aeruginosa.

Some aspects of water quality in a polluted lowland river in relation to the intracellular chemical levels in planktonic and epilithic diatoms

Changes in elemental concentrations of diatoms and river water from the river Erh-Jen were determined using scanning electron microscopy energy-dispersive X-ray microanalysis and inductively coupled plasma mass spectrometry. Relatively large amounts of copper and lead found in both planktonic and epilithic diatoms implied these algae might play an important role in biogeochemical cycles and in the transfer of those elements to higher trophic levels in the aquatic environment. Changes in elemental concentrations within diatom cells were found to vary with other elements within cells and the same or different elements in water. Planktonic and epilithic cells showed different correlation patterns. For epilithic diatoms, negative correlations were found between concentrations of total phosphorus and phosphate in water and those of phosphorus within cells, and between concentrations of lead in water and in cells. Concentrations of chromium and mercury within planktonic cells and those of phosphorus, manganese and lead within epilithic ones were found to be easily influenced by other elements in river water, indicating appearance of the competitive manner on uptake of such elements by algal cells. Relatively high concentration factors (CFs) for cadmium, mercury and lead by diatoms in this study suggested they are good accumulators for these heavy metals. Significant negative corrections were found between the CFs of diatoms and the concentrations of elements in river water.

Kinetics of inhibition in the biodegradation of monoaromatic hydrocarbons in presence of heavy metals

The toxicity and inhibitory effects of heavy metals such as cadmium, nickel and zinc on alkylbenzene removal were evaluated with a Bacillus strain. The kinetics of alkylbenzene biodegradation with the different heavy metals at various concentrations were modeled using the Andrews equation which yielded a good fit between model and experimental data. Additional experiments undertaken with a Pseudomonas sp. in presence of nickel confirmed a good fit between experimental data and the Andrews model for this strain as well. The heavy metals inhibition constants (Ki) were calculated for different combinations of volatile organic compounds (VOC) and heavy metals. The present approach provides a method for evaluating and quantifying the inhibition effect of heavy metals on the biodegradtion of pollutants by specific microbial strains.

Bioaccumulation and localization of exogenous cadmium in a teleost by electron microscopy (TEM) and its specific quantitation by electron probe X-ray microanalysis (EPMA)

A cadmium bioconcentration study was carried out in a fresh water teleost, Colisa fasciatus, to study the bioaccumulation kinetics and fate of exogenous cadmium (Cd) in biological tissues. Study shows that on exposure of the fish to a sublethal concentration of cadmium in test water, Cd uptake results in its bioconcentration in gills, liver and muscle tissues. To explore whether the accumulated Cd reaches the membranes or inside the cells, transmission electron microscopy (TEM) of the thin sections of tissues was done after histochemical localization of Cd in cells by modified SST method. TEM studies of sections of gills, liver and muscle tissues showed the deposits of exogenous Cd (visualized as dense clouds) in biological cells. This suggests the presence of free or loosely bound Cd on the membranes and inside the cells, which in the presence of Na2S is converted into insoluble metal sulfides. Electron probe X-ray microanalysis (EPMA) studies confirmed the presence of Cd on the membrane surface as well as inside the cells of bioindicator organs suggesting involvement of membrane transport of exogenous Cd inside the cells and its deposition as loosely bound insoluble metal complexes.

Chromium-resistant soil actinomycetes: their tolerance to other metals and antibiotics

Chromium occurs widely in most soils, but generally in trace amounts. Actinomycetes, one of the important components of the microbial population in soils interact with a variety of metals including chromium. This study was aimed to evaluate the tolerance of soil actinomycetes to Cr6+, other metals and antibiotics. Thirty-two actinomycete isolates were screened for their tolerance to Cr6+ on tryptone yeast extract agar medium supplemented with Cr6+ at concentrations ranging from 100 to 2000 micrograms ml-1. Thirteen Cr-tolerant isolates were selected on the basis of their growth at the highest concentration, but their performance was not satisfactory in Cr6+ containing liquid salts medium. Resistance of these isolates to other metals and antibiotics was assessed using agar-cup assay and disc diffusion technique, respectively. The sequence of metal toxicity for the actinomycete isolates was in the order Hg2+ > Ni2+ > Cu2+ > Co2+ > Cd2+, but the Cr6+ resistance of the isolates could not be correlated with their antibiotic-resistance profile.

Vanadium affects vacuolation and phosphate metabolism in Hansenula polymorpha

The yeast Hansenula polymorpha is able to grow on vanadate concentrations that are toxic to other organisms. Transmission electron microscopy analysis showed that H. polymorpha cells growing on a vanadate-containing medium undergo a significant increase in cell vacuolation and a thickening of the cell wall; the presence of small cytoplasmic vesicles and an increase in cristae at the level of the plasma membrane were also observed. These ultrastructural modifications were accompanied by a change in the intracellular polyphosphate level, as shown by in vivo 31P-NMR. The involvement of these observed changes in vanadium detoxification is discussed.

Metal cation uptake by yeast: a review

This review addresses metal uptake specifically by yeast. Metal uptake may be passive, active or both, depending on the viability of the biomass, and is influenced by a number of environmental and experimental factors. Uptake is typically accompanied by a degree of ion exchange and, under certain conditions, may be enhanced by the addition of an energy source. Intracellularly accumulated metal is most readily associated with the cell wall and vacuole but may also be bound by other cellular organelles and biomolecules. The intrinsic biochemical, structural and genetic properties of the yeast cell along with environmental conditions are crucial for its survival when exposed to toxic metals. Conditions of pH, temperature and the presence of additional ions, amongst others, have varying effects on the metal uptake process. We conclude that yeasts have contributed significantly to our understanding of the metal uptake process and suggest directions for future work.

Accumulation and intracellular compartmentation of lithium ions in Saccharomyces cerevisiae

Accumulation of Li+ in Saccharomyces cerevisiae X2180-1B occurred via an apparent stoichiometric relationship of 1:1 (K+/Li+) when S. cerevisiae was incubated in the presence of 5 and 10 mM LiCl for 3 h. Other cellular cations (Mg2+, Ca2+ and Na+) did not vary on Li+ accumulation, although lithium chemistry dictates a degree of similarity to Group I and II metal cations. Compartmentation of Li+ was mainly in the vacuole which accounted for 85% of the Li+ accumulated after a 6-h incubation period. The remainder was located in the cytosol with negligible amounts being bound to cell fragments including the cell wall. Transmission electron microscopy of Li(+)-loaded cells revealed enlarged vacuoles compared with control cells. This asymmetric cellular distribution may therefore enhance tolerance of S. cerevisiae to Li+ and ensure that essential metabolic processes in the cytosol are not disrupted.

Bioremoval of heavy metals by the use of microalgae

Bioremoval, the use of biological systems for the removal of metal ions from polluted waters, has the potential to achieve greater performance at lower cost than conventional wastewater treatment technologies for metal removal. Bioremoval capabilities of microalgae have been extensively studied, and some commercial applications have been initiated. Although microalgae are not unique in their bioremoval capabilities, they offer advantages over other biological materials in some conceptual bioremoval process schemes. Selected microalgae strains, purposefully cultivated and processed for specific bioremoval applications, have the potential to provide significant improvements in dealing with the world-wide problems of metal pollution. In addition to strain selection, significant advances in the technology appear possible by improving biomass containment or immobilization techniques and by developing bioremoval process steps utilizing metabolically active microalgae cultures. The latter approach is especially attractive in applications where extremely low levels of residual metal ions are desired. This review summarizes the current literature, highlighting the potential benefits and problems associated with the development of novel algal-based bioremoval processes for the abatement of heavy metal pollution.

Laboratory Study of Chemical Speciation of Mercury in Lake Sediment and Water under Aerobic and Anaerobic Conditions

Chemical speciation and partitioning of radiolabeled HgCl 2 were studied in model aquatic systems consisting of undisturbed eutrophic lake sediment and water in plastic cylinders. The cylinders were either gradually made anaerobic by a gentle flow of N 2 -CO 2 or kept aerobic by air flow. The proportion of methylated 203 Hg was significantly higher, in both water and sediment, in the anaerobic systems than in the aerobic systems. The composition and total concentration of fatty acids originating from bacterial phospholipids, as well as the concentration of vitamin B 12 , including related cobalamins, were similar in sediments from the anaerobic and aerobic systems. Bacterial cell numbers were, on average, 3.6 times higher in the anaerobic water columns than in the aerobic ones. Volatilization of 203 Hg occurred in all systems except in an autoclaved control and was of similar magnitudes in the anaerobic and aerobic systems. Incorporation of 203 Hg into the sediment was significantly faster in the aerobic systems than in the anaerobic systems. These results suggest that episodes of anoxia in bottom waters and sediment cause an increase in net mercury methylation and, hence, an increase in bioavailable mercury.

Effects of Metals on Streptomyces coelicolor Growth and Actinorhodin Production

Actinorhodin production by Streptomyces coelicolor was used as a model system to study the effects of metals on growth and polyketide synthesis in a streptomycete. Numerous metals were tested in cultures grown in liquid media. Mercury and cadmium were highly toxic, and copper, nickel, and lead were less so, but all tended to inhibit both growth and antibiotic synthesis to a similar extent. Unexpectedly, manganese, cobalt, zinc, and, to a lesser extent, chromium caused complex effects that in general resulted in some enhancement of growth yield but a reduction in antibiotic titers. These complex effects meant that cobalt, manganese, and zinc had lower 50% inhibitory concentrations for antibiotic yields compared with those for biomass. The physiologically active divalent cations calcium and magnesium were also tested. Calcium at high concentrations was particularly effective in reducing antibiotic titers and enhancing growth yields. By adding calcium at different phases of growth, it could be demonstrated that it was most effective in reducing the antibiotic yield when added during the early growth phase. Addition during the antibiotic-producing phase resulted in little reduction of final actinorhodin titers.

Effects of Metals on a Range of Streptomyces Species

A plate diffusion method was used to assess the tolerance of 28 mesophilic and 4 thermophilic species of streptomycetes to eight metals. This method allowed a qualitative screen of the effects of the metals on growth, on sporulation, and in some cases, on secondary metabolite production. Tolerant and sensitive species were identified, some of which exhibited the same response (i.e., tolerance or sensitivity) to a number of metals. Experiments in liquid culture were used to quantify the precise concentration ranges of the metals at which the most tolerant or sensitive species could grow. Distribution profiles of the sensitivities of all species examined toward different metals revealed that the order of toxicity was Hg > Cd > Co > Zn > Ni > Cu > Cr > Mn.