Bactericidal activity of a Ce-promoted Ag/AlPO4 catalyst using molecular oxygen in water

Curcumin-Based Universal Grafting of Poly(OEGMA) Brushes and Their Antibacterial Applications

Catechol and/or pyrogallol groups are recognized as crucial for the formation of polyphenol coatings on various substrates. Meanwhile, studies on polyphenolic molecules that do not contain such groups are relatively rare. The key molecule in turmeric-based universal (i.e., substrate-independent) coatings is curcumin, which contains no catechol or pyrogallol groups. As chemically reactive hydroxyl groups would remain after curcumin coating, it is hypothesized that curcumin coating can serve as a reactive layer for controlling interfacial properties. In this study, a curcumin-based surface modification method is developed to graft polymer brushes from various substrates, including titanium dioxide, gold, glass, stainless steel, and nylon. α-Bromoisobutyryl bromide, a polymerization initiator, is introduced to the curcumin-coated substrates via esterification; subsequently, poly(oligo(ethylene glycol) methacrylate) (poly(OEGMA)) is grafted from the surfaces. Compared to the control surfaces, poly(OEGMA)-grafted surfaces significantly suppress bacterial adhesion by up to 99.4%, demonstrating their antibacterial properties. Considering its facile and versatile surface modification, curcumin-based polymer grafting can be an efficient method for controlling the chemical/physical properties of surfaces in a substrate-independent manner.

Formation of a ZnO nanorods-patterned coating with strong bactericidal capability and quantitative evaluation of the contribution of nanorods-derived puncture and ROS-derived killing

To endow Ti-based orthopedic implants with strong bactericidal activity, a ZnO nanorods-patterned coating (namely ZNR) was fabricated on Ti utilizing a catalyst- and template-free method of micro-arc oxidation (MAO) and hydrothermal treatment (HT). The coating comprises an outer layer of ZnO nanorods and a partially crystallized inner layer with nanocrystalline TiO₂ and Zn₂TiO₄ embedded amorphous matrix containing Ti, O and Zn. During HT, Zn²⁺ ions contained in amorphous matrix of the as-MAOed layer migrate to surface and react with OH⁻ in hydrothermal solution to form ZnO nuclei growing in length at expense of the migrated Zn²⁺. ZNR exhibits intense bactericidal activity against the adhered and planktonic S. aureus in vitro and in vivo. The crucial contributors to kill the adhered bacteria are ZnO nanorods derived mechano-penetration and released reactive oxygen species (ROS). Within 30 min of S. aureus incubation, ROS is the predominant bactericidal contributor with quantitative contribution value of ∼20%, which transforms into mechano-penetration with prolonging time to reach quantitative contribution value of ∼96% at 24 h. In addition, the bactericidal contributor against the planktonic bacteria of ZNR is relied on the released Zn²⁺. This work discloses an in-depth bactericidal mechanism of ZnO nanorods.

(1)

A templates and catalysts-free method is used to fabricate ZnO nanorods on Ti

(2)

ZnO nanorods-arrayed coating shows intense broad-spectrum bactericidal activity

(3)

Main bactericidal contributor of ZnO nanorods to adhered bacteria is mechano-puncture

(4)

Main bactericidal contributor of ZnO nanorods to planktonic bacteria is released Zn²⁺

Oxygen vacancy clusters essential for the catalytic activity of CeO2 nanocubes for o-xylene oxidation

Catalytic oxidation of o-xylene was investigated on CeO₂ nanocubes calcined at 350, 450, 550, and 650 °C, among which the samples calcined at 550 °C exhibited the highest activity and long durability. Positron annihilation spectroscopy measurements revealed that the size and distribution of oxygen vacancies for CeO₂ nanocubes could be tuned by carefully controlling the calcination temperature. An excellent linear correlation between a factor related to size and density of oxygen vacancy clusters and reaction rate of o-xylene oxidation was revealed on ceria nanocubes. This means that oxygen vacancy clusters with suitable size and distribution are responsible for catalytic reaction via simultaneous adsorption and activation of oxygen and o-xylene. Electron spin resonance spectra revealed that over the CeO₂ cubes, water vapor significantly promoted the formation of ∙OH radicals with a sharp decrease in the signals relating to oxygen vacancies, accelerating the transformation of o-xylene to the intermediate benzoate species, resulting in an enhancement of catalytic activity. Water thus serves as a “smart” molecule; its introduction into the feed mixture further confirmed the key role of oxygen vacancies in the catalytic performance of CeO₂ nanocubes. A possible mechanism of oxygen vacancy formation during the calcination process was also proposed.

Antimicrobial activity of silver loaded MnO2 nanomaterials with different crystal phases against Escherichia coli

Silver-loaded MnO2 nanomaterials (Ag/MnO2), including Ag/α-MnO2, Ag/β-MnO2, Ag/γ-MnO2 and Ag/δ-MnO2 nanorods, were prepared with hydrothermal and impregnation methods. The bactericidal activities of four types of Ag/MnO2 nanomaterials against Escherichia coli were investigated and an inactivation mechanism involving Ag(+) and reactive oxygen species (ROS) was also proposed. The bactericidal activities of Ag/MnO2 depended on the MnO2 crystal phase. Among these nanomaterials, Ag/β-MnO2 showed the highest bactericidal activity. There was a 6-log decrease in E. coli survival number after treatment with Ag/β-MnO2 for 120min. The results of 5,5-dimethyl-1-pyrroline-N-oxide spin-trapping measurements by electron spin resonance indicate OH and O2‾ formation with addition of Ag/β-MnO2, Ag/γ-MnO2 or Ag/δ-MnO2. The strongest peak of OH appeared for Ag/β-MnO2, while no OH or O2‾ signal was found over Ag/α-MnO2. Through analysis of electron spin resonance (ESR) and Ag(+) elution results, it could be deduced that the toxicity of Ag(+) eluted from Ag/MnO2 nanomaterials and ROS played the main roles during the bactericidal process. Silver showed the highest dispersion on the surface of β-MnO2, which promoted ROS formation and the increase of bactericidal activity. Experimental results also indicated that Ag/MnO2 induced the production of intracellular ROS and disruption of the cell wall and cell membrane.

Role of in situ resultant H₂O₂ in the visible-light-driven photocatalytic inactivation of E. coli using natural sphalerite: a genetic study

This study investigated how a natural sphalerite (NS) photocatalyst, under visible light irradiation, supports photocatalytic bacterial inactivation. This was done by comparing parent E. coli BW25113, and its two isogenic single-gene knock-out mutants, E. coli JW0797-1 (dps(-) mutant) and JW1721-1 (katE(-) mutant), where both dps and KatE genes are likely related to H2O2 production. NS could inactivate approximately 5-, 7- and 7-log of E. coli BW25113, JW0797-1, and JW1721-1 within 6 h irradiation, respectively. The two isogenic mutants were more susceptible to photocatalysis than the parental strain because of their lack of a defense system against H2O2 oxidative stress. The ability of in situ resultant H2O2 to serve as a defense against photocatalytic inactivation was also confirmed using scavenging experiments and partition system experiments. Studying catalase activity further revealed that in situ H2O2 played an important role in these inactivation processes. The destruction of bacterial cells from the cell envelope to the intracellular components was also observed using field emission-scanning electron microscopy. Moreover, FT-IR was used to monitor bacterial cell decomposition, key functional group evolution, and bacterial cell structures. This is the first study to investigate the photocatalytic inactivation mechanism of E. coli using single-gene deletion mutants under visible light irradiation.

Preparation of silver nanoparticles embedded hierarchically porous AlPO4 monoliths

Silver nanoparticles were homogenously embedded on the skeletons of hierarchically porous AlPO₄ by immersing the monoliths in a silver colloid.

Photodegradation of 2,4-D induced by NO₂(-) in aqueous solutions: the role of NO₂

To elucidate the effect of nitrite ion (NO₂(-)) on the photodegradation of organic pollutants, a 300 W mercury lamp and Pyrex tubes restricting the transmission of wavelengths below 290 nm were used to simulate sunlight, and the photodegradation processes of 2,4-dichlorophenoxyacetic acid (2,4-D) with different concentrations of NO₂(-) in freshwater and seawater were studied. The effect of reactive oxygen species (ROS) on the photolysis of 2,4-D was also demonstrated using electron paramagnetic resonance (EPR). The results indicated that the 2,4-D photolysis reaction followed the first-order kinetics in freshwater and seawater under different concentrations of NO₂(-). Meanwhile, the photochemical reaction rate of 2,4-D increased with increasing concentration of NO₂(-). When the concentration of NO₂(-) was lower than 23 mg/L, the photodegradation rate of 2,4-D in seawater was higher than that in freshwater. However, when the concentration of NO₂(-) was reached 230 mg/L, 2,4-D degradation slowed down in seawater. It was important to note that EPR spectra showed NO₂ radical was generated in the NO₂(-) solution under simulated sunlight irradiation, indicating that 2,4-D photodegradation could be induced by NO₂. These results show the key role of NO₂(-) in photochemistry and are helpful for better understanding of the phototransformation of environmental contaminants in natural aquatic systems.

Excellent antimicrobial properties of silver-loaded mesoporous silica SBA-15

AIMS

To synthesize silver-loaded mesoporous silica SBA-15 (Ag/SBA-15) materials and examine their antimicrobial action and antimicrobial mechanism.

METHODS AND RESULTS

Ag/SBA-15 materials were prepared by means of incipient wetness impregnation, impregnation and direct hydrothermal synthesis methods. The antimicrobial activity of Ag/SBA-15 was investigated using Escherichia coli as an indicator bacterium, and the antimicrobial mechanism was explored. The properties and Ag(+) release behaviour of Ag/SBA-15 materials were compared. Experimental results showed that Ag/SBA-15 materials resulted in 7·5 log inactivation of E. coli for only 60 min, which exhibited very high antimicrobial activities at room temperature without using any light or electrical power input. The cell wall and cell membrane were destroyed in the antimicrobial process, leading to leakage of intracellular components. The formation of extracellular reactive oxygen species (ROS) involved in the bactericidal process was confirmed. Production of intracellular ROS was also discovered.

CONCLUSIONS

Ag/SBA-15 exhibited high antimicrobial activity against E. coli. This antimicrobial effect was a synergistic action between extracellular ROS and the toxicity of Ag(+) , which induced intracellular ROS production and subsequent cell death.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study revealed for the first time the antimicrobial activities and mechanisms of Ag/SBA-15 materials prepared with different methods.

Aluminophosphate monoliths with high CO2-over-N2 selectivity and CO2 capture capacity

Monoliths of microporous aluminophosphates (AlPO₄-17 and AlPO₄-53) were structured by binder-free pulsed current processing.

Preparation of a hierarchically porous AlPO4 monolith via an epoxide-mediated sol-gel process accompanied by phase separation

Monolithic aluminum phosphate (AlPO₄) with a macro-mesoporous structure has been successfully prepared via the sol-gel process accompanied by phase separation in the presence of poly(ethylene oxide) (PEO). Gelation of the system has been mediated by propylene oxide (PO), while PEO induces a phase separation. The dried gel is amorphous, whereas the crystalline tridymite phase precipitates upon heating above 1000 °C. Heat treatment does not spoil the macroporous morphology of the AlPO₄ monoliths. Nitrogen adsorption-desorption measurements revealed that the skeletons of the dried gels possess a mesostructure with a median pore size of about 30 nm and a surface area as high as 120 m² g^-1. Hydrothermal treatment before heat treatment can increase the surface area to 282 m² g^-1.

The abatement of major pollutants in air and water by environmental catalysis

This review reports the research progress in the abatement of major pollutants in air and water by environmental catalysis. For air pollution control, the selective catalytic reduction of NO x (SCR) by ammonia and hydrocarbons on metal oxide and zeolite catalysts are reviewed and discussed, as is the removal of Hg from flue gas by catalysis. The oxidation of Volatile organic compounds (VOCs) by photo- and thermal-catalysis for indoor air quality improvement is reviewed. For wastewater treatment, the catalytic elimination of inorganic and organic pollutants in wastewater is presented. In addition, the mechanism for the procedure of abatement of air and water pollutants by catalysis is discussed in this review. Finally, a research orientation on environment catalysis for the treatment of air pollutants and wastewater is proposed.

Fast reactivity of a cyclic nitrone-calix[4]pyrrole conjugate with superoxide radical anion: theoretical and experimental studies

Nitrone spin traps have been employed as probes for the identification of transient radical species in chemical and biological systems using electron paramagnetic resonance (EPR) spectroscopy and have exhibited pharmacological activity against oxidative-stress-mediated diseases. Since superoxide radical anion (O2(•-)) is a major precursor to most reactive oxygen species and calix[4]pyrroles have been shown to exhibit high affinity to anions, a cyclic nitrone conjugate of calix[4]pyrrole (CalixMPO) was designed, synthesized, and characterized. Computational studies at the PCM/B3LYP/6-31+G(d,p)//B3LYP/6-31G(d) level suggest a pendant-type linkage between the calix[4]pyrrole and the nitrone to be the most efficient design for spin trapping of O2(•-), giving exoergic reaction enthalpies (ΔH(298K,aq)) and free energies (ΔG(298K,aq)) of -16.9 and -2.1 kcal/mol, respectively. (1)H NMR study revealed solvent-dependent conformational changes in CalixMPO leading to changes in the electronic properties of the nitronyl group upon H-bonding with the pyrrole groups as also confirmed by calculations. CalixMPO spin trapping of O2(•-) exhibited robust EPR spectra. Kinetic analysis of O2(•-) adduct formation and decay in polar aprotic solvents using UV-vis stopped-flow and EPR methods gave a larger trapping rate constant for CalixMPO and a longer half-life for its O2(•-) adduct compared to the commonly used nitrones. The unusually high reactivity of CalixMPO with O2(•-) was rationalized to be due to the synergy between the α-effect and electrostatic effect by the calix[4]pyrrole moiety on O2(•-) and the nitrone, respectively. This work demonstrates for the first time the application of an anion receptor for the detection of one of the most important radical intermediates in biological and chemical systems (i.e., O2(•-)).

Photochemical effect of humic acid components separated using molecular imprinting method applying porphyrin-like substances as templates in aqueous solution

To elucidate the relationship between photochemical functions with the structure of humic acids (HA), we developed a molecular imprinting method to separate the substances with given structure and investigated their photochemical behavior in aqueous solution. The substances with porphyrin-like core structure, such as chlorophyll or heme, were employed as template substances for preparing molecular imprinting polymers (MIP). The polymers were used to separate the substances with porphyrin-like structure from HA. Photochemical experiments were conducted to evaluate effects of the separated HA fractions on the photodegradation of coexisting organic pollutant. The results showed that all fractions bound by MIP accelerated photochemical degradation of coexisting 2,4-dichlorophenoxyacetic acid (2,4-D) under simulated sunlight (lambda>290 nm) irradiation, indicating that HA with porphyrin-like structure possesses better photoactivity than ones without the structure. The photochemical degradation of 2,4-D was enhanced when Fe(III), the ubiquitous element in natural aquatic systems, was added owing to the formation of Fe(III) complex with the HA. Electron paramagnetic resonance (EPR) spectra indicated that OH* and 1O2 radicals were generated in the solutions of HA fractions bound by MIP under simulated sunlight irradiation, implying that 2,4-D degradation could be related to oxidation reactions caused by reactive oxygen species (ROS).

Separation of phthalocyanine-like substances from humic acids using a molecular imprinting method and their photochemical activity under simulated sunlight irradiation

To elucidate the existence of phthalocyanine-like (Pc-like) substances in humic acids (HA) and their roles in photochemical transformation of organic pollutants, Pc-imprinted polymers (MIP) were synthesized successfully and employed to separate Pc-like substances from HA. The fraction bound by MIP (F(mip-b)) presented better photochemical activity for degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution irradiated by simulated sunlight. The pseudo-first-order rate constant of 2,4-D photodegradation with the presence of F(mip-b) was 2.5 times as high as that in solution containing effluent fraction (F(eff)). These results show the key role of some HA with special structures in photochemistry and are helpful for better understanding phototransformation of environmental contaminants in natural aquatic systems.

Lipophilic beta-cyclodextrin cyclic-nitrone conjugate: synthesis and spin trapping studies

Nitrone spin traps are commonly employed as probes for the identification of transient radicals in chemical and biological systems using electron paramagnetic resonance (EPR) spectroscopy. Nitrones have also found applications as therapeutic agent in the treatment of radical-mediated diseases. Therefore, a spin trap that incorporates high reactivity to superoxide radical anion (O2(*-)), more persistent superoxide adduct, enhanced bioavailability, and selective targeting in one molecular design is desirable. In this work, the synthesis of a nitrone spin trap, 4, that is tethered via amide bonds to a beta-cyclodextrin (beta-CD) and a dodecyl chain was achieved with the expectation that the beta-cyclodextrin would lead to increased reactivity to O2(*-) and persistent O2(*-) adduct while the lipophilic chain would impart membrane targeting property. The two constitutional racemic isomers, 4a and 4b, were separated using preparative HPLC, and structural analysis and self-aggregation properties were carried out using NMR, induced circular dichroism, dynamic light scattering, transmission electron microscopy, and computational approach. EPR spin trapping of O2(*-) by 4a and 4b was only successful in DMSO and not in an aqueous system, due most likely to the amphiphilic character of 4 that can favor conformations (or aggregation) hindering radical addition to nitrone. Kinetics of formation and decay of the 4a-O2H adduct in polar aprotic solvents show faster reactivity to O2(*-) and more persistent O2(*-) adduct compared to nitrones not conjugated to beta-CD. Computational analysis of 4a and 4b as well as 4a-OOH and 4b-OOH adducts were carried out, and results show that isomerism, both constitutional and stereochemical, affects the orientations of aminoxyl-NO and/or hydroperoxyl groups relative to the beta-CD annulus for optimal H-bond interaction and stability.

Superoxide radical anion adduct of 5,5-dimethyl-1-pyrroline N-oxide. 4. Conformational effects on the EPR hyperfine splitting constants

Spin trapping has been commonly employed in the detection of superoxide radical anion in chemical and biological systems; hence, accurate interpretation of the hyperfine splitting constants (hfsc's) arising from the O(2)(*-) adducts (also referred to as hydroperoxyl (HO(2)(*)) radical adducts) of various nitrones is important. In this work, the nature of the relevant hfsc's was investigated by examining the effect of conformational changes in the hydroperoxyl moiety of the O(2)(*-) adducts of 5,5-dimethyl-1-pyrroline N-oxide (DMPO), 5-ethoxycarbonyl-5-methyl-1-pyrroline N-oxide (EMPO), 5-diethoxyphosphoryl-5-methyl-1-pyrroline N-oxide (DEPMPO), 5-carbamoyl-5-methyl-1-pyrroline N-oxide (AMPO), and 7-oxa-1-azaspiro[4.4]non-1-en-6-one N-oxide, (CPCOMPO) on the magnitude of a(N), a(beta-H), and a(gamma-H). Conformational change around the substituents and their effect on the hfsc's were also explored. Results indicate that a(beta-H) is most sensitive to conformational changes of the hydroperoxyl and substituent groups relative to hfsc's of other nuclei. The orbital overlap between the C-H sigma-orbital and the SOMO of the nitroxyl nitrogen plays a crucial factor in determining the magnitude of the a(beta-H). The hfsc values for the O(2)(*-) adducts were predicted with high accuracy by using a low-cost computational method at the PCM(water)/BHandHLYP/EPR-III//B3LYP/6-31G* level of theory without taking into account the explicit water interaction.

The antibacterial and antifungal activity of a soda-lime glass containing silver nanoparticles

The antibacterial and antifungal activity of a low melting point soda-lime glass powder containing silver nanoparticles has been studied. Nano-Ag sepiolite fibres containing monodispersed silver nanoparticles (d(50) approximately 11 +/- 9 nm) were used as the source of silver. This powder presents a high antibacterial (against gram-positive and gram-negative bacteria) as well as antifungal (against I. orientalis) activity. The observed high activity against yeast has been explained by considering the inhibitory effect of the Ca(2+) lixiviated from the glass on the growth of the yeast colonies.