High efficient photocatalytic degradation of p-nitrophenol on a unique Cu2O/TiO2 p-n heterojunction network catalyst

Catalyst-On-Hotspot Nanoarchitecture: Plasmonic Focusing of Light onto Co-Photocatalyst for Efficient Light-To-Chemical Transformation

Plasmon-mediated catalysis utilizing hybrid photocatalytic ensembles promises effective light-to-chemical transformation, but current approaches suffer from weak electromagnetic field enhancements from polycrystalline and isotropic plasmonic nanoparticles as well as poor utilization of precious co-catalyst. Here, efficient plasmon-mediated catalysis is achieved by introducing a unique catalyst-on-hotspot nanoarchitecture obtained through the strategic positioning of co-photocatalyst onto plasmonic hotspots to concentrate light energy directly at the point-of-reaction. Using environmental remediation as a proof-of-concept application, the catalyst-on-hotspot design (edge-AgOcta@Cu2O) enhances photocatalytic advanced oxidation processes to achieve superior organic-pollutant degradation at ≈81% albeit having lesser Cu2O co-photocatalyst than the fully deposited design (full-AgOcta@Cu2O). Mass-normalized rate constants of edge-AgOcta@Cu2O reveal up to 20-fold and 3-fold more efficient utilization of Cu2O and Ag nanoparticles, respectively, compared to full-AgOcta@Cu2O and standalone catalysts. Moreover, this design also exhibits catalytic performance >4-fold better than emerging hybrid photocatalytic platforms. Mechanistic studies unveil that the light-concentrating effect facilitated by the dense electromagnetic hotspots is crucial to promote the generation and utilization of energetic photocarriers for enhanced catalysis. By enabling the plasmonic focusing of light onto co-photocatalyst at the single-particle level, the unprecedented design offers valuable insights in enhancing light-driven chemical reactions and realizing efficient energy/catalyst utilizations for diverse chemical, environmental, and energy applications.

Tailoring Interfacial Physicochemical Properties in Cu2O-TiO2@rGO Heterojunction: Insights from EXAFS and Electron Trap Distribution Analysis

In this study, a solution-based synthesis technique was utilized to produce Cu2O nanoparticles (NPs) on TiO2 nanofibers (TNF), which were then subsequently coated with reduced graphene oxide (rGO) nanosheets. In the absence of any cocatalyst, CTNF@rGO-3% composite displayed an ideal photocatalytic H2 evolution rate of 96 μmol g-1 h-1 under visible light irradiation, this was 10 times higher than that of pure TNF. At 420 nm, the apparent quantum efficiency of this composite reached a maximum of 7.18%. Kelvin probe force microscopy demonstrated the formation of an interfacial electric field that was oriented from CTNF to rGO and served as the driving force for interfacial electron transfer. The successful establishment of an intimate interface between CTNF@rGO facilitated the efficient transfer of charges and suppressed the rate of recombination of photogenerated electron-hole pairs, leading to a substantial enhancement in photocatalytic performance. X-ray photoelectron spectroscopy, photoluminescence spectra, and electrochemical characterization provide further confirmation that formation of a heterojunction between CTNF@rGO leads to an extension in the lifetimes of the photogenerated charge carriers. The experimental evidence suggests that a p-n heterojunction is the mechanism responsible for the significant photocatalytic activity observed in the CTNF@rGO composite during H2 evolution.

Efficient photocatalytic reduction of p-nitrophenol under visible light irradiation based on Ag NPs loaded brown 2D g-C3N4 / g-C3N4 QDs nanocomposite

Recently, low-cost graphitic carbon nitride (g-C3N4) revealed high photocatalytic activities and provided solutions to environmental pollution. In this study, we synthesized brown mesoporous 2D g-C3N4 by calcination dicyandiamide with pluronic P123. This is followed by loading of Ag NPs on the prepared 2D g-C3N4 by photodeposition process. After that, a ternary composite 2% Ag/ 2D g-C3N4 / g-C3N4 QDs heterojunction photocatalyst has been successfully prepared. The prepared nanomaterials were comprehensively characterized by various analysis techniques such as XRD, UV-Vis., BET, XPS, SEM, TEM. This new system exhibited a large surface area with porous structure and a wide absorption of visible light. The results verified that Ag NPs decoration enhanced the charge separation of photo-generated carriers of g-C3N4 2D and g-C3N4 QDs, promote significant enhancement in the photocatalytic activity for reduction of p-nitrophenol with a rate constant (k) value of 0.49729 / min in 6 min. This rate is about two-fold higher than that observed for pure g-C3N4 2D and g-C3N4 QDs as well as shows an improvement compared to 2% Ag/ g-C3N4 2D and g-C3N4 2D/ g-C3N4 QDs. The results open the door to design highly efficient 2D/0D nanocomposite photocatalysts for a wide variety of environmental applications.

Nanotechnologies for environmental remediation and their ecotoxicological impacts

Environmental nanoremediation is an emerging technology that aims to rapidly and efficiently remove contaminants from the polluted sites using engineered nanomaterials (ENMs). Inorganic nanoparticles which are generally metallic, silica-based, carbon-based, or polymeric in nature serve to remediate through chemical reactions, filtration, or adsorption. Their greater surface area per unit mass and high reactivity enable them to treat groundwater, wastewater, oilfields, and toxic industrial contaminants. Despite the growing interest in nanotechnological solutions for bioremediation, the environmental and human hazard associated with their use is raising concerns globally. Nanoremediation techniques when compared to conventional remediation solutions show increased effectivity in terms of cost and time; however, the main challenge is the ability of ENMs to remove contaminants from different environmental mediums by safeguarding the ecosystem. ENMs improving the accretion of the pollutant and increasing their bioavailability should be rectified along with the vigilant management of their transfer to the upper levels of the food chain which subsequently causes biomagnification. The ecosystem-centered approach will help monitor the ecotoxicological impacts of nanoremediation considering the safety, sustainability, and proper disposal of ENMs. The environment and human health risk assessment of each novel engineered nanomaterial along with the regulation of life cycle assessment (LCA) tools of ENMs for nanoremediation can help investigate the possible environmental hazard. This review focuses on the currently available nanotechnological methods used for environmental remediation and their potential toxicological impacts on the ecosystem.

Nanozyme-assisted ratiometric photoelectrochemical aptasensor over Cu2O nanocubes mediated photocurrent-polarity-switching based on S-scheme FeCdS@FeIn2S4 heterostructure

The controllable modulation of the response mode is highly attractive for the construction of photoelectrochemical (PEC) sensors with improved sensitivity and anti-interference ability in complex real samples matrix. Here, we present a charming proof-of-concept ratiometric PEC aptasensor of enrofloxacin (ENR) analysis via the controllable signal transduction. Different with the traditional sensing mechanism, this ratiometric PEC aptasensor integrates the anodic PEC signal induced by PtCuCo nanozyme-catalyzed precipitation reaction and the polarity-switching cathodic PEC response mediated by Cu2O nanocubes on S-scheme FeCdS@FeIn2S4 heterostructure. Taking advantages of the photocurrent-polarity-switching signal response model and the superior performance of the photoactive substrate material, the proposed ratiometric PEC aptasensor displays a good detection linear range for ENR analysis from 0.01 pg mL-1 to 10 ng mL-1, with a detection limit of 3.3 fg mL-1. This study provides a general platform for detecting interested trace analytes in real samples and expands the diversity of sensing strategy design.

A Review on Cu2O-Based Composites in Photocatalysis: Synthesis, Modification, and Applications

Photocatalysis technology has the advantages of being green, clean, and environmentally friendly, and has been widely used in CO₂ reduction, hydrolytic hydrogen production, and the degradation of pollutants in water. Cu₂O has the advantages of abundant reserves, a low cost, and environmental friendliness. Based on the narrow bandgap and strong visible light absorption ability of Cu₂O, Cu₂O-based composite materials show infinite development potential in photocatalysis. However, in practical large-scale applications, Cu₂O-based composites still pose some urgent problems that need to be solved, such as the high composite rate of photogenerated carriers, and poor photocatalytic activity. This paper introduces a series of Cu₂O-based composites, based on recent reports, including pure Cu₂O and Cu₂O hybrid materials. The modification strategies of photocatalysts, critical physical and chemical parameters of photocatalytic reactions, and the mechanism for the synergistic improvement of photocatalytic performance are investigated and explored. In addition, the application and photocatalytic performance of Cu₂O-based photocatalysts in CO₂ photoreduction, hydrogen production, and water pollution treatment are discussed and evaluated. Finally, the current challenges and development prospects are pointed out, to provide guidance in applying Cu₂O-based catalysts in renewable energy utilization and environmental protection.

Key Role of Corncob Based-Hydrochar (HC) in the Enhancement of Visible Light Photocatalytic Degradation of 2,4-Dichlorophenoxyacetic Acid Using a Derivative of ZnBi-Layered Double Hydroxides

A superior heterojunction of HC-ZnBi-LDO was synthesized in two steps, namely hydrothermal carbonization, followed by co-precipitation. The 2% HC-ZnBi-LDO heterojunction photocatalysts could degrade over 90.8% of 30 mg/L 2,4-dichlorophenoxyacetic acid (2,4-D) using 1.0 g/L of the catalyst after 135 min of visible light exposure at pH 4. The activity of 2% HC-ZnO-LDO was remarkably stable. Approximately 86.4-90.8% of 30 mg/L 2,4-D was degraded, and more than 79-86.4% of TOC was mineralized by 2% HC-ZnBi-LDO at pH 4 after 135 min of visible light exposure during four consecutive cycles. The rapid separation and migration of charge carriers at the interfaces between HC and ZnBi-LDO were achieved within 2% HC-ZnBi-LDO. Moreover, the electron acceptor characteristic of HC in 2% HC-ZnBi-LDO caused the recombination of charge carriers to decrease significantly, thus generating more reactive radicals, such as hydroxyl radicals (OH^●) and superoxide radicals (O₂^●-). These results demonstrate that the novel 2% HC-ZnBi-LDO is a superior photocatalyst for the remediation of hazardous organic pollutants.

The removal enhancement of organic contaminations and optimization of the photocatalytic efficiency by Box-Behnken design using ZnO-TiO2/porous graphene aerogel

In this study, zinc oxide-titanium dioxide/graphene aerogel (ZnO-TiO2/GA) was successfully synthesized through a simple and cost-effective hydrothermal self-assembly process. Besides, the surface response model and the experimental design according to the Box-Behnken model were selected to determine the optimal removal efficiency for crystal violet (CV) dye and para-nitrophenol (p-NP) phenolic compound. According to the obtained results, the highest degradation efficiency for CV dye of 99.6% was obtained under the following conditions: pH 6.7, CV concentration of 23.0 mg/L, and catalyst dose of 0.30 g/L. For p-NP, the degradation efficiency reached 99.1% under the following conditions: H2O2 volume of 1.25 mL, pH 6.8, and catalyst dose of 0.35 g/L. Therewithal, kinetic models of adsorption-photodegradation, thermodynamic adsorption, and free radical scavenging experiments were also investigated to propose the specific mechanisms involving the removal of CV dye and p-NP. According to the aforementioned results, the study provided a resulting ternary nanocomposite with great removal performance for water pollutants via the synergetic effects of adsorption and photodegradation processes.

Bismuth-rich oxyhalide (Bi7O9I3-Bi4O5Br2) solid-solution photocatalysts for the degradation of phenolic compounds under visible light

HYPOTHESIS

The development of solid-solution photocatalysts with tunable bandgaps and band structures, which are significant factors that influence their photocatalytic properties, is crucial.

EXPERIMENTS

We fabricated a series of novel bismuth-rich Bi₇O₉I₃-Bi₄O₅Br₂ solid-solution photocatalysts with controlled I:Br molar ratios (denoted as B-I_xBr_1-x, x  = 0.2, 0.3, 0.4, or 0.6) via a rapid, facile, and energy-efficient microwave-heating route. The photodegradations under visible-light irradiation of the phenolic compounds (4-nitrophenol (4NP), 3-nitrophenol (3NP), and bisphenol A (BPA)), and the simultaneous photodegradation of BPA and rhodamine B (RhB) in a coexisting BPA - RhB system were investigated.

FINDINGS

The B-I_0.3Br_0.7 solid solution provided the highest photocatalytic activity toward 4NP degradation, with degradation rates 32 and 4 times higher than those of Bi₇O₉I₃ and Bi₄O₅Br₂, respectively. The photodegradation efficiency of the studied phenolic compounds followed the order BPA (97.5%) > 4NP (72.8%) > 3NP (27.5%). The RhB-sensitization mechanism significantly enhanced the photodegradation efficiency of BPA. Electrochemical measurements demonstrated the efficient separation and migration of charge carriers in the B-I_0.3Br_0.7 solid solution, which enhanced the photocatalytic activity. The B-I_0.3Br_0.7 solid solution effectively activated molecular oxygen to produce •O₂^-, which subsequently produced other reactive species, including H₂O₂ and •OH, as revealed by reactive-species trapping, nitroblue tetrazolium transformation, and o-tolidine oxidation experiments.

Synthesis and characterization of SSM@NiO/TiO2 p-n junction catalyst for bisphenol a degradation

Photocatalyst immobilization on support materials is essential for large-scale applications. Here, we describe growth of a p-n junction catalyst (NiO/TiO₂) on a stainless-steel mesh (SSM) support using a facile hydrothermal method. The morphological superiority of the composite over previously reported NiO/TiO₂ catalysts was probed using scanning and transmission electron microscopy. Flower petal-like NiO grew uniformly on SSM, which was evenly covered by TiO₂ nanoparticles. Theoretical and experimental X-ray diffraction patterns were compared to analyze the development of the composite during various stages of synthesis. The photocatalytic activity of a powdered catalyst and SSM@catalyst was compared by measuring bisphenol A (BPA) degradation. SSM@NiO/TiO₂ achieved the highest rate of BPA degradation, removing 96% of the BPA in 120 min. Scavenging experiments were used to investigate the charge separation and degradation mechanism. SSM@NiO/TiO₂ showed excellent reusability potential, achieving and sustaining 91% BPA removal after 10 rounds of cyclic degradation. Reusability performance, composite resilience, apparent quantum yields, and figures of merit suggest that SSM@NiO/TiO₂ has excellent utility for practical applications.

In2S3 nanoflakes grounded in Bi2WO6 nanoplates: A novel hierarchical heterojunction catalyst anchored on W mesh for efficient elimination of toluene

Toxic toluene can be completely oxidized in CO₂ and H₂O with novel three-dimensional (3D) In₂S₃@Bi₂WO₆ hierarchical crystals under visible light. Dense and uniform In₂S₃ nanoflakes are rooted in Bi₂WO₆ nanoplates which intercross with each other and are anchored on a pliable tungsten mesh. This leads to the construction of a stable and porous interface for adsorbing and decomposing target gaseous toluene. The firm contact between In₂S₃ and Bi₂WO₆ initiates the formation of a built-in electric field that helps in channeling the photogenerated electrons in Bi₂WO₆ CB to quench the holes in₂S₃ VB. This results in highly capable electrons and holes, as well as notable increase in the yields of •O₂^- and •OH. 99.7% of toluene is removed and 93.4% is converted to CO₂ when it is degraded in simulated air. This validates its remarkable efficacy in detoxifying toluene.

Biogenic Synthesis of Cu-Doped ZnO Photocatalyst for the Removal of Organic Dye

The Cu-doped ZnO photocatalysts were prepared with a green and coprecipitation approach by using water hyacinth (Eichhornia crassipes) aquatic plant extract. In the preparation process, different amount of copper precursors such as 1, 2, 3, 4, and 5% of molar ratio were added to zinc nitrate precursors and abbreviated as Cu-ZnO (1%), Cu-ZnO (2%), Cu-ZnO (3%), Cu-ZnO (4%), and Cu-ZnO (5%), respectively. The characterization of the obtained samples was carried out, and the removal of the methylene blue (MB) dye was examined. Out of all catalysts, Cu-ZnO (3%) had the best photocatalytic performance and 89% of the MB dye was degraded. However, the degradation performances of blank (without catalysts), ZnO, Cu-ZnO (1%), Cu-ZnO (2%), Cu-ZnO (4%), and Cu-ZnO (5%) catalysts were 6, 54, 69, 83, 80, and 73%, respectively. Therefore, the use of water hyacinth plant extract with the optimum amount of Cu added to ZnO during the preparation of the catalyst could have a promising application in the degradation of organic pollutants.

Extractive removal of micro and trace nitrofen, 2, 4-dichlorophenol and p-nitrotrophenol from water/soil by humic acid ester ether

The amphiphilic humic acid ester ether (HAEE), as a kind of solid-phase extractant with characteristics of easy separation and hydrophilic-hydrophobic amphiphilic property, was prepared and used to extract micro or trace nitrofen, 2,4-dichlorophenol and p-nitrotrophenol (NIPs) from water and soil. Degradation of NIPs and extractant regeneration were carried out by simple photocatalysis. The adsorption equilibrium of the mono- or three mixed NIPs by HAEE in aqueous could be quickly reached within 20 min. The adsorption process was fit to quasi-second-order kinetics model and Friendlich thermodynamics model. The possible adsorption interaction was discussed. Results suggested that the adsorption of NIPs onto HAEE predominated by hydrogen bonding, hydrophobic interaction and π-π interaction. The extraction capacity of mixed NIPs (80 μg/L each component) by HAEE was up to 0.38 mg/g and tended to be multi-layer adsorption, in which p-nitrotrophenol had higher adsorption competitiveness because of lower resistance to HAEE. When HAEE-NIPs were degraded by photo-catalyst Fe⁰/F-TiO₂ for 8 h, not only the adsorbed NIPs could be totally degraded and mineralized, but also the HAEE could be effectively regenerated. When the NIPs were continuously extracted from 40-year aging soil for three times (regenerative twice) by combined extractant (48 mL H₂O + 2 mL n-hexane + 0.1 g HAEE), the total extraction efficiency of NIPs could reach to 84.66%. This research could supplement the theory and technique for harmless treatment of NIPs contaminated water and soil.

LED-driven photocatalysis of toluene, trichloroethylene and formaldehyde by cuprous oxide modified titanate nanotube arrays

In this study, cuprous oxide modified titanate nanotube arrays photocatalyst (Cu₂O/TNAs), a p-n type hetero-structure, was successfully synthesized by square wave voltammetry electrodeposition method (SWVE) with copper (II) acetate monohydrate as precursor. Cu₂O/TNAs photocatalysts were characterized by SEM, XRD, XPS, and UV-vis DRS to investigate the physical and chemical properties such as surface structure, light absorption, and element composition. Results of characterization indicated that the Cu₂O nanoparticles (Cu₂O NPs) were firmly deposited on the surface of TNAs without significant morphological change. The enhanced photocatalytic (PC) performance of as-synthesized materials was exemplified by the test of photocurrent, which revealing that the average photocurrent density of Cu₂O/TNAs (0.95 μA cm^-2) was 1.38 times higher than TNAs (0.69 μA cm^-2) under 24.2 mW cm^-2 LED irradiation. Three VOCs (volatile organic compounds), namely, Toluene, Formaldehyde and Trichloroethylene can be completely removed in the Cu₂O/TNAs PC process with rate constants (k_obs) of 2.08 × 10^-2, 3.11 × 10^-2, and 6.58 × 10^-2 min^-1, respectively, with the effort of the synergism of the photo-generated holes and hydroxyl radicals. Detail mechanism of hetero-junction Cu₂O/TNAs composite PC system was proposed to clarify the redox reaction.

Phosphorylation of arenes, heteroarenes, alkenes, carbonyls and imines by dehydrogenative cross-coupling of P(O)-H and P(R)-H

Organophosphorous compounds have recently emerged as a powerful class of compounds with widespread applications, such as in bioactive natural products, pharmaceuticals, agrochemicals and organic materials, and as ligands in catalysis. The preparation of these compounds requires synthetic techniques with novel catalytic systems varying from transition metal, photo- and electrochemical catalysis to transformations without metal catalysts. Over the past few decades, the addition of P-H bonds to alkenes, alkynes, arenes, heteroarenes and other unsaturated substrates in hydrophosphination and other related reactions via the above-mentioned catalytic processes has emerged as an atom economical approach to obtain organophosphorus compounds. In most of the catalytic cycles, the P-H bond is cleaved to yield a phosphorus-based radical, which adds onto the unsaturated substrate followed by reduction of the corresponding radical yielding the product.

Simultaneous hydrogen production and ibuprofen degradation by green synthesized Cu2O/TNTAs photoanode

This study aimed to produce a clean energy, hydrogen, and to remove pollutants simultaneously in water by photoelectrochemical (PEC) method. The photo-anode of cuprous oxide modified titanate nanotube arrays (Cu₂O/TNTAs) was synthesized by using lactic acid, green tea, and coffee as reductants individually. The characterizations of Cu₂O/TNTAs were performed by ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), field emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) to investigate the physical and chemical properties such as structure, crystallization, element contents, and optical performance. The electrochemical analyses of Cu₂O/TNTAs showed the photo-current of Cu₂O/TNTAs-t (using green tea as reductant) was 2.4 times higher than pure TNTAs, illustrating the effective separation of electron-hole pairs after Cu₂O modification. The photoelectrochemical performances of Cu₂O/TNTAs-t and Cu₂O/TNTAs-c (using coffee as the reductant) were better than Cu₂O/TNTAs-L (using lactic acid as the reductant) in terms of photo-current density, Ibuprofen degradation, and hydrogen generation, implying that depositing Cu₂O on TNTAs can significantly improve the electron mobility by reducing the recombination rate of electron-hole pairs, which is beneficial to simultaneously ibuprofen degradation and hydrogen production.

Effective mineralization of p-nitrophenol by catalytic ozonation using Ce-substituted La1‒xCexFeO3 catalyst

In this study, cerium-doped lanthanum ferrite perovskite oxides (La_1‒xCe_xFeO₃) with different A-site were synthesized using a sol-gel method and they were used as ozonation catalyst for p-nitrophenol (PNP) mineralization for the first time. Catalytic activity in terms of total organic carbon (TOC) removal followed the order of La_0.8Ce_0.2FeO₃ > La_0.4Ce_0.6FeO₃ > La_0.6Ce_0.4FeO₃ > La_0.2Ce_0.8FeO₃ > LaFeO₃ with 77, 66, 61, 60 and 56% respectively. The synthesized catalysts were characterized by diffraction of X-ray (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) and scanning electronic microscopy (SEM). Moreover, electron spin resonance (ESR) and radicals quenching experiments showed that the active oxygen species in the ozone decomposition process are mainly hydroxyl radical (·OH), and also include superoxide radical (O₂^-) and singlet oxygen (¹O₂). Furthermore, the superior activity of La_0.8Ce_0.2FeO₃ could be attributed to the higher surface area, the richer lattice oxygen, richer surface -OH groups and the facilitated redox Ce³⁺/Ce⁴⁺ and Fe²⁺/Fe³⁺ cycling. In addition, this study provides an insight to use metal-doped perovskite catalysts for catalytic ozonation.

Significantly enhanced photothermal catalytic hydrogen evolution over Cu2O-rGO/TiO2 composite with full spectrum solar light

Reduced graphene oxide (rGO) has conspicuous photothermal characteristics in photothermal applications. Thus in our previous work, we used reduced graphene oxide (rGO) supported titanium dioxide (TiO₂) nanocomposite (rGO/TiO₂) to absorb the ultraviolet and infrared light in the photothermal hydrogen evolution process. In order to make use of the full spectrum solar energy into other clear energy, the visible light should be also considered in following research. Herein, we report a cuprous oxide (Cu₂O) decorated reduced graphene oxide (rGO) supported titanium dioxide (TiO₂) (Cu₂O-rGO/TiO₂) catalysts, which can absorb full spectrum solar light in an innovative way. The Cu₂O-rGO/TiO₂ catalyst is synthesized through a one-step hydrothermal method. The rates of hydrogen evolution are 17800 μmol·g^-1h^-1 under photothermal condition (90°C), 3800 μmol·g^-1h^-1 under photocatalysis condition only (25°C) and 0 μmol·g^-1h^-1 under thermal catalysis condition only. The result of photothermal catalytic hydrogen evolution rate is about 4.7 times that of the sum of the photocatalytic and thermal reactions. The photothermal synergetic effect promotes the photo-generated electron-holes separation through the rGO due to the temperature rising, and accelerates the reaction rates on the catalyst surface in hydrogen evolution process simultaneously. This work could provide us a new promising way for the conversion of full spectrum solar energy to hydrogen energy.

Quantification of photocatalytically-generated hydrogen peroxide in the presence of organic electron donors: Interference and reliability considerations

Photocatalytic H₂O₂ production is an innovative on-site H₂O₂ synthesis method to treat organic pollutants through Fenton-like reactions, avoiding the need and potential liability of H₂O₂ storage and transportation. Accurate quantification of H₂O₂ is crucial to explore the mechanism of photocatalytic H₂O₂ production and optimize reaction parameters. In this work, three common H₂O₂ quantification methods (i.e., titration with potassium permanganate (KMnO₄), and colorimetry with ammonium metavanadate (NH₄VO₃) or N,N-diethylp-phenylenediamine-horseradish peroxidase (DPD-POD)) were compared and their susceptibility to interference by seven types of representative organics were considered. Interference mechanisms were explored based on the electron-donating (E_gap) and electron-accepting (E_LUMO) ability of the present organics. The accuracy of the KMnO₄ titration method is greatly compromised by aromatic compounds even at 0.1 mM due to the increased KMnO₄ consumption by direct oxidation. The presence of p-benzoquinone that directly reacts with NH₄VO₃ and DPD compromises these colorimetric methods, especially DPD-POD colorimetry at concentrations as low as 0.1 mM. The DPD-POD method should also be scrutinized in the presence of phenols due to significant disturbance by oxidation byproducts (e.g. hydroquinone inducing immediate color disappearance). A flowchart was generated to provide guidelines for selecting an appropriate H₂O₂ quantification method for different water matrices treated by Fenton-like reactions.

Nanoremediation technologies for sustainable remediation of contaminated environments: Recent advances and challenges

A major and growing concern within society is the lack of innovative and effective solutions to mitigate the challenge of environmental pollution. Uncontrolled release of pollutants into the environment as a result of urbanisation and industrialisation is a staggering problem of global concern. Although, the eco-toxicity of nanotechnology is still an issue of debate, however, nanoremediation is a promising emerging technology to tackle environmental contamination, especially dealing with recalcitrant contaminants. Nanoremediation represents an innovative approach for safe and sustainable remediation of persistent organic compounds such as pesticides, chlorinated solvents, brominated or halogenated chemicals, perfluoroalkyl and polyfluoroalkyl substances (PFAS), and heavy metals. This comprehensive review article provides a critical outlook on the recent advances and future perspectives of nanoremediation technologies such as photocatalysis, nano-sensing etc., applied for environmental decontamination. Moreover, sustainability assessment of nanoremediation technologies was taken into consideration for tackling legacy contamination with special focus on health and environmental impacts. The review further outlines the ecological implications of nanotechnology and provides consensus recommendations on the use of nanotechnology for a better present and sustainable future.

Layer-by-Layer Electrodeposition of FTO/TiO2 /Cux O/CeO2 (1 < x < 2) Photocatalysts with High Peroxidase-Like Activity by Greatly Enhanced Singlet Oxygen Generation

Inorganic nanomaterials have attracted much attention as enzyme mimics because of simple and stable spatial conformation of those artificially synthesized nanocatalysts. Cu₂ O, as an important kind of narrow band gap semiconductor, is identified as effective as visible-light-driven photocatalysts, which can catalyze decomposition of H₂ O₂ into reactive oxygen species. Moreover, after forming Cu_x O/CeO₂ hybrids, the strongly coupled interface between the two components will further improve their catalytic performance. In this paper, the authors try to construct FTO/TiO₂ /Cu_x O/CeO₂ (1 < x < 2) nanohybrids with such a kind of active interface via a layer-by-layer electrodeposition strategy by aid of the following surface etching process. It is found that FTO/TiO₂ /Cu_x O/CeO₂ exhibits good peroxidase mimic activity in the dark but much better performance under visible light irradiation (λ ≥ 420 nm) during catalytic oxidation of 3,3',5,5'-tetramethylbenzidine substrates in the presence of H₂ O₂ . Detailed characterizations disclose that the construction of TiO₂ /Cu₂ O pn-heterojunctions do effectively accelerate separation of photogenerated carriers, and the formation of a highly active Cu_x O/CeO₂ interface is synergistically favorable for selectively generating singlet oxygen to boost the catalytic performance of FTO/TiO₂ /Cu_x O/CeO₂ .

Insight into the degradation of p-nitrophenol by visible-light-induced activation of peroxymonosulfate over Ag/ZnO heterojunction

In this report, the peroxymonosulfate activation over Ag/ZnO heterojunction under visible light (Ag/ZnO/PMS/Vis) for p-nitrophenol (p-NP) contaminant degradation was conducted in detail. Herein, the catalyst dosage was decreased, and the results showed that a dosage of 0.5 g L^-1 Ag/ZnO and 4 mM PMS almost completely degraded 30 mg L^-1 p-NP after 90 min of irradiation. In addition, the PMS activation mechanism of Ag/ZnO/PMS/Vis system was proposed by investigations of the influence of PMS concentration, the FTIR spectra, UV-Vis spectroscopy, and electrochemical analyses. Additionally, the role of SO₄^•- in the photocatalytic reaction is determined by a combination of a trapping test using isopropanol and tert-butanol as probe compounds and electron spin resonance (ESR) spectroscopy. This report provides a potential alternative to remove persistent organic contaminants in sewage using PMS incorporated with Ag/ZnO under visible light irradiation.

Trace Amounts of Co3O4 Nano-Particles Modified TiO2 Nanorod Arrays for Boosted Photoelectrocatalytic Removal of Organic Pollutants in Water

Trace amounts of Co₃O₄ modified TiO₂ nanorod arrays were successfully fabricated through the photochemical deposition method without adding any nocuous reagents. The Co₃O₄/TiO₂ nanorod arrays fabricated in acid solution had the highest photo-electrochemical activity. We elaborated on the mechanism of Co₃O₄-TiO₂ fabricated in different pH value solutions. The Co₃O₄-TiO₂ had a more remarkable photo-electrochemical performance than the pure TiO₂ nanorod arrays owing to the heterojunction between Co₃O₄ and TiO₂. The degradation of methylene blue and hydroquinone was selected as the model reactions to evaluate the photo-electrochemical performance of Co₃O₄-TiO₂ nanorod arrays. The Co₃O₄/TiO₂ nanorod arrays had great potential in waste water treatment.

Self-assembly Cu2O nanowire arrays on Cu mesh: A solid-state, highly-efficient, and stable photocatalyst for toluene degradation under sunlight

Sunlight driven photocatalysis offers an effective and eco-friendly technology for volatile organic compounds (VOCs) removal. Three dimensional (3D) and oriented structure can facilitate efficient photon absorption and rapid diffusion of VOCs, which prevails over the powder-formed catalysts. Herein, free-standing and uniform p-type Cu₂O nanowire (NW) arrays were obtained through heat treatment of Cu(OH)₂ NWs, which were spontaneously grown from Cu mesh in air under room temperature for the first time. The as-prepared Cu₂O NWs show excellent degradation performance in decomposing 30 ppm toluene (99.9 % within 120 min) and high stability (no decline after ten recycles). The toluene degradation was also conducted under the natural sunlight, demonstrating complete removal from 12:00 am to 15:00 pm. During photocatalysis, toluene is attacked by the photogenerated holes (h⁺) and hydroxyl radicals (·OH), and finally oxidized to nontoxic small molecules. The photocatalytic removing toluene with Cu₂O NWs/Cu mesh has a promising application prospect owing to its low cost, high efficiency, stability, and convenient operation.

A visible-light active p-n heterojunction NiFe-LDH/Co3O4 supported on Ni foam as photoanode for photoelectrocatalytic removal of contaminants

Light and electricity are the most prevalent energy sources in natural environment. Herein, a visible-light active Ni foam@NiFe-LDH/Co₃O₄ composite was successfully prepared by loading 1D Co₃O₄ nanowires on the surface of 2D NiFe-LDH nanosheets to be a p-n heterojunction supported on the 3D Ni foam through hydrothermal method, which can be used as photoanode directly for photoelectrocatalytic (PEC) process to simultaneously remove bisphenol (BPA) and Cr(VI) from water. This unique Ni foam-based photoanode modified by NiFe-LDH/Co₃O₄ heterojunction can fully expose the active sites, enhance visible-light absorption and facilitate the migration and separation of photogenerated carriers, thus obtained a boosted efficiency for simultaneous removal of BPA and Cr(VI) under a low applied voltage. Furthermore, the convenient recyclability and excellent stability of the as-prepared Ni foam@NiFe-LDH/Co₃O₄ also show a great potential in environmental purification.

Construction and visible-light-photocatalysis of a novel ternary heterostructure BiOI/(001)TiO2/Ti3C2

Constructing effective heterojunctions between semiconductors and appropriate cocatalysts and exposing highly active crystal facets have been considered an effective approach to obtain efficient photocatalysts. Herein, a novel BiOI/(001)TiO₂/Ti₃C₂ (BTT) hybrid was for the first time synthesized by in situ growing (001)TiO₂ nanosheets on a 2D MXene nanomaterial (Ti₃C₂) and subsequent deposition of flower-like nanoflake BiOI on the obtained (001)TiO₂/Ti₃C₂ hybrid. The BTT hybrid exhibited excellent photocatalytic performance for degradation of Rhodamine B under visible light irradiation, with the highest degradation rate being 6.26, 1.72, and 1.35 times of that of a pure BiOI, BiOI/TiO₂ hybrid, and BiOI/Ti₃C₂ hybrid, respectively. The staggeringly enhanced photoactivity of BTT was attributed to the separation of photogenerated carriers by a multiple charge transfer channels because of the formed p-n and Schottky double junctions. This study demonstrates that (001)TiO₂/Ti₃C₂ obtained by simple hydrothermal oxidation of Ti₃C₂ can be a good cocatalyst for fabricating excellent visible-light-driven photocatalyst.

Enhanced visible light photocatalytic activity of Fe2O3 modified TiO2 prepared by atomic layer deposition

In this work, commercial anatase TiO2 powders were modified using ultrathin Fe2O3 layer by atomic layer deposition (ALD). The ultrathin Fe2O3 coating having small bandgap of 2.20 eV can increase the visible light absorption of TiO2 supports, at the meantime, Fe2O3/TiO2 heterojunction can effectively improve the lifetime of photogenerated electron-hole pairs. Results of ALD Fe2O3 modified TiO2 catalyst, therefore, showed great visible light driven catalytic degradation of methyl orange compared to pristine TiO2. A 400 cycles of ALD Fe2O3 (~ 2.6 nm) coated TiO2 powders exhibit the highest degradation efficiency of 97.4% in 90 min, much higher than pristine TiO2 powders of only 12.5%. Moreover, an ultrathin ALD Al2O3 (~ 2 nm) was able to improve the stability of Fe2O3-TiO2 catalyst. These results demonstrate that ALD surface modification with ultrathin coating is an extremely powerful route for the applications in constructing efficient and stable photocatalysts.

Historical development and prospects of photocatalysts for pollutant removal in water

Photocatalysis, as a low-cost and environment friendly technology, has demonstrated a significant potential for water pollution purification; it has received extensive attention in recent decades. The key is the photocatalyst; a large number of photocatalysts have been developed. To better understand and further develop the photocatalysis technology for water treatment, this review summarizes its development over time. The development period is divided into four stages (1960s-1993, 1994-2000, 2001-2010, and 2011-present) to provide readers with a better understanding of the development characteristics, and causes and consequences of each historical stage. This review expounds the origin and development of photocatalysis and the obstacles encountered and overcome. It describes the development of mechanisms and methods to solve these problems in each time period. Moreover, it reviews the recent development of new photocatalysts, the concept of designing photocatalysts, and photocatalytic-coupling systems. Finally, it enumerates the problems that continue to exist in the application of photocatalysis technology, and highlights the key issues that must be addressed in future research. The review is aimed at providing the researchers with a deeper understanding of photocatalysis technology and encourage further development of the application of photocatalysis to water treatment.