Behavior of antimony(V) during the transformation of ferrihydrite and its environmental implications

Factors driving antimony accumulation in soil-pakchoi and wheat agroecosystems: Insights and predictive models

The accumulation of antimony (Sb) in plants and its potential effects on human health are of increasing concern. Nevertheless, only a few countries or regions have established soil Sb thresholds for agricultural purposes, and soil properties have not been taken into account. This study investigated the accumulation of Sb in the edible parts of pakchoi and wheat grain by adding exogenous Sb to 21 soils with varying properties. The results revealed a positive correlation between bioavailable Sb (Sbava, extracted by 0.1 M K2HPO4) in soil and Sb in the edible parts of pakchoi (R2 = 0.77, p < 0.05) and wheat grain (R2 = 0.54, p < 0.05). Both machine learning and traditional multiple regression analysis indicated Sbava was the most critical feature and the main soil properties that contributed to Sb uptake by pakchoi and wheat were CaCO3 and clay, respectively. The advisory food limits for Sb in pakchoi and wheat were estimated based on health risk assessment, and used to derive soil thresholds for safe pakchoi and wheat production based on Sbtot and Sbava, respectively. These findings hold potential for predicting Sb uptake by crops with different soil properties and informing safe production management strategies.

Novel Insights into Sb(III) Oxidation and Immobilization during Ferrous Iron Oxygenation: The Overlooked Roles of Singlet Oxygen and Fe (oxyhydr)oxides Formation

Reactive oxygen species (ROS) produced from the oxygenation of reactive Fe(II) species significantly affect the transformation of metalloids such as Sb at anoxic-oxic redox interfaces. However, the main ROS involved in Sb(III) oxidation and Fe (oxyhydr)oxides formation during co-oxidation of Sb(III) and Fe(II) are still poorly understood. Herein, this study comprehensively investigated the Sb(III) oxidation and immobilization process and mechanism during Fe(II) oxygenation. The results indicated that Sb(III) was oxidized to Sb(V) by the ROS produced in the aqueous and solid phases and then immobilized by formed Fe (oxyhydr)oxides via adsorption and coprecipitation. In addition, chemical analysis and extended X-ray absorption fine structure (EXAFS) characterization demonstrated that Sb(V) could be incorporated into the lattice structure of Fe (oxyhydr)oxides via isomorphous substitution, which greatly inhibited the formation of lepidocrocite (γ-FeOOH) and decreased its crystallinity. Notably, goethite (α-FeOOH) formation was favored at pH 6 due to the greater amount of incorporated Sb(V). Moreover, singlet oxygen (1O2) was identified as the dominant ROS responsible for Sb(III) oxidation, followed by surface-adsorbed ·OHads, ·OH, and Fe(IV). Our findings highlight the overlooked roles of 1O2 and Fe (oxyhydr)oxide formation in Sb(III) oxidation and immobilization during Fe(II) oxygenation and shed light on understanding the geochemical cycling of Sb coupled with Fe in redox-fluctuating environments.

Efficacy and mechanism of enhanced Sb(V) removal from textile wastewater using ferric flocs in aerobic biological treatment

Antimony contamination from textile industries has been a global environmental concern and the existing treatment technologies could not reduce Sb(V) to meet the discharge standards. To overcome this shortcoming, ferric flocs were introduced to expedite the biological process for enhanced Sb(V) removal in wastewater treatment plant (WWTP). For this purpose, a series of laboratorial-scale sequential batch reactor activated sludge processes (SBRs) were applied for Sb(V) removal with varied reactor conditions and the transformation of Fe and Sb in SBR system was investigated. Results showed a significant improvement in Sb(V) removal and the 20 mg L-1 d-1 iron ions dosage and iron loss rate was found to be only 15.2%. The influent Sb(V) concentration ranging 153-612 μg L-1 was reduced to below 50 μg L-1, and the maximum Sb(V) removal rate of the enhanced system reached about 94.3%. Furthermore, it exhibited high stability of Sb(V) removal in the face of antimonate load, Fe strike and matrix change of wastewater. Sludge total Sb determination and capacity calculation revealed decreasing in Sb adsorption capacity and desorption without fresh Fe dosage. While sludge morphology analysis demonstrated the aging and crystallization of iron hydroxides. These results verify the distinct effects of fresh iron addition and iron aging on Sb(V) removal. High-throughput gene pyrosequencing results showed that the iron addition changed microbial mechanisms and effect Fe oxidized bacterial quantity, indicating Sb(V) immobilization achieved by microbial synergistic iron oxidation. The present study successfully established a simple and efficient method for Sb(V) removal during biological treatment, and the modification of biological process by iron supplement could provide insights for real textile wastewater treatment.

Antimony release and volatilization from organic-rich and iron-rich submerged soils

Antimony (Sb) is an poorly understood, increasingly common pollutant, especially in soils susceptible to waterlogging. We investigated the impact of waterlogging on Sb release, methylation, and volatilization from an organic-rich wetland soil and an iron (Fe)-rich floodplain soil in a 27-day microcosm experiment. The release of Sb into the porewaters of the organic-rich soil was environmentally relevant and immediate with waterlogging (3.2 to 3.5 mg L-1), and likely associated with a complex interplay of sulfide precipitation, sorption with organic matter and manganese (Mn) (oxyhydr)oxides in the soil. The release of Sb from the Fe-rich soil was likely associated with Fe-(oxyhydr)oxide reduction and immobilized due to co-precipitation with Fe-sulfides or as Sb-sulfides. Volatile Sb was produced from the soils after waterlogging. The organic-rich soil produced more volatile Sb (409 to 835 ng kgsoil-1), but the Fe-rich soil volatilized Sb more efficiently. The negligible association of Sb volatilization with soil parameters indicates a more complex underlying, potentially microbial, mechanism and that antimony volatilization could be ubiquitous and not dependent on specific soil properties. Future works should investigate the microbial and physiochemical drivers of Sb volatilization in soils as it may be an environmentally relevant part of the biogeochemical cycle.

Antimony mobility in soil near historical waste rock at the world's largest Sb mine, Central China

Soil near waste rock often contains high concentrations of antimony (Sb), but the mechanisms that mobilize Sb in a soil closely impacted by the waste rock piles are not well understood. We investigated these mobility mechanisms in soils near historical waste rock at the world's largest Sb mine. The sequential extraction (BCR) of soil reveal that over 95 % Sb is present in the residual fraction. The leached Sb concentration is related to the surface protonation and deprotonation of soil minerals. SEM-EDS shows Sb in the soil is associated with Fe and Ca. Moreover, X-ray absorption spectroscopy (XAS) results show Sb is predominantly present as Sb(V) and is associated with Fe in the form of tripuhyite (FeSbO4) as well as edge- and corner-sharing complexes on ferrihydrite and goethite. Thus, Fe in soils is important in controlling the mobility of Sb via surface complexation and co-precipitation of Sb by Fe oxides. The initially surface-adsorbed Sb(V) or co-precipitation is likely to undergo a phase transformation as the Fe oxides age. In addition, Sb mobility may be controlled by small amounts of calcium antimonate. These results further the understanding of the effect of secondary minerals in soils on the fate of Sb from waste rock weathering and inform source treatment for Sb-contaminated soils.

Iron colloidal transport mechanisms and sequestration of As, Ni, and Cu along AMD-induced environmental gradients

Colloids are common in mine waters and their chemistry and interactions are critical aspects of metal(loid)s cycling. Previous studies mostly focus on the colloidal transport of metal(loid)s in zones where rivers and soil profiles receive acid mine drainage (AMD). However, there is limited knowledge of the colloid and the associated toxic element behavior as the effluent flows through the coal waste dump, where a geochemical gradient is produced due to AMD reacting with waste rocks which have high acid-neutralization effects. Here, we investigated the geochemistry of Fe and co-occurring elements As, Ni, and Cu along the coal waste dump, in aqueous, colloidal, and precipitate phases, using micro/ultrafiltration combined with STEM, AFM-nanoIR, SEM-EDS, XRD, and FTIR analysis. The results demonstrated that a fast attenuation of H+, SO42-, and metal(loid)s happened as the effluent flowed through the waste-rock dump. The Fe, As, Ni, and Cu were distributed across all colloidal sizes and primarily transported in the nano-colloidal phase (3 kDa-0.1 μm). An increasing pH induced a higher percentage of large Fe colloid fractions (> 0.1 μm) associated with greater sequestration of trace metals, and the values for As from 39.5 % to 54.4 %, Ni from 40.8 % to 75.7 %, and Cu from 43.7 % to 56.0 %, respectively. The Fe-bearing colloids in AMD upstream (pH ≤ 3.0) were primarily composed of Fe-O-S and Fe-O-C with minor Al-Si-O and Ca-O-S, while in less acidic and alkaline sections (pH ≥ 4.1), they were composed of Fe-O with minor Ca-O-S. The iron colloid agglomerates associated with As, Ni, and Cu precipitated coupling the transformation of jarosite, and schwertmannite to ferrihydrite, goethite, and gypsum. These results demonstrate that the formation and transformation of Fe-bearing colloids response to this unique geochemical gradient help to understand the natural metal(loid)s attenuation along the coal waste dump.

Divergent repartitioning of antimony and arsenic during jarosite transformation: A comparative study under aerobic and anaerobic conditions

Jarosite is the host mineral of Sb(V) and As(V) in mining environments. However, the repartitioning of Sb and As during its transformation is poorly understood. Additionally, the mutual effect between the redistribution behavior of As and Sb during jarosite conversion remains unclear. Here, we investigated the transformation of Sb(V)-, As(V)- and Sb(V)-As(V)-jarosite at pH 5.5 under aerobic and anaerobic conditions without a reductant. The results indicated that co-precipitated Sb(V) promotes jarosite dissolution, and the final products were mainly goethite and hematite. In contrast, the co-precipitated As(V) retarded jarosite dissolution and altered the transformation pathway, mainly forming lepidocrocite, which might be attributed to the formation of As-Fe complexes on the jarosite surface. The inhibiting or promoting effect increased with the increase in co-precipitated As or Sb concentration. In the treatment with Sb(V)-As(V)-jarosite, the inhibition effect of co-precipitated As(V) on mineral dissolution was predominant, but the end-products were mainly goethite and hematite. Compared with the aerobic system, the dissolution and transformation of jarosite in treatments in the anaerobic system occurred faster, although without a reductant, which was possibly associated with the reduced CO2 content in the reaction solutions after degassing. In all treatments, the release of Sb(aq) and As(aq) into the solution was negligible during jarosite transformation. The transformation processes drove As into the surface-bound exchangeable and poorly crystalline phases, while Sb was typically redistributed in the poorly crystalline phase. During the transformation of Sb(V)-As(V)-jarosite, the co-existence of As significantly increased the proportion of Sb distributed on the solid surface and in the poorly crystalline phase. These findings are valuable for predicting the long-term fate of Sb and As in mining environments.

Construction of a novel ferrihydrite/MoS2 heterogeneous Fenton-like catalyst for efficient degradation of organic pollutants under neutral conditions

In this work, we have fabricated a novel Fenton-like ferrihydrite/MoS2 (Fh/MoS2) composite and verified that the introduction of a small amount of iron on the surface of MoS2 can directly promote the exposure of Mo4+, finally enhancing the catalytic activity of the catalyst. Even though the content of iron element is only 1.19% in the composite, the reaction rate constant of Fh/MoS2 system for the degradation of environmental pollutants, such as organic dyes, antibiotic, and ionic liquid, is all much better than that of pure MoS2 system, which is attributed to much more generation of reactive oxygen species derived from synergistic effect of Fe3+/Fe2+ and Mo4+/Mo6+ redox cycles. The results of XPS and low-temperature EPR confirm that the exposure amount of Mo4+ active sites of 10% Fh/MoS2 is greatly increased, which is conducive to the conversion of Fe3+ to Fe2+ in the reaction process, thus effectively promoting the activation of H2O2.

Analog soil organo-ferrihydrite composites as suitable amendments for cadmium and arsenic stabilization in co-contaminated soils

Remediation of CdAs co-contaminated soils has long been considered a difficult problem to solve, as Cd and As have distinctly different metallic characters. Amending contaminated soils with traditional single passivation materials may not always work well in the stabilization of both Cd and As. Here, we reported that analog soil organo-ferrihydrite composites made with either living or non-living organics (bacterial cells or humic acid) could achieve stabilization of both Cd and As in contaminated soils. BCR and Wenzel sequential extractions showed that organo-ferrihydrite, particularly at 1 wt% loading, shifted liable Cd and As to more stable phases. Organo-ferrihydrite amendments significantly (p < 0.05) increased soil urease, alkaline phosphatase and catalase enzyme activities. With organo-ferrihydrite amendments, the bioavailable fraction of Cd decreased to 35.3 % compared with the control (65.1 %), while the bioavailable As declined from 29.4 % to 12.4%. Soil pH, microbial community abundance and diversity were almost unaffected by organo-ferrihydrite. Ferrihydrite and organo fractions both contributed to direct Cd-binding, while the organo fraction probably maintained the Fe-bound As via lowering ferrihydrite phase transformation. Compared to pure ferrihydrite, organo-ferrihydrite composites performed better not only in reducing liable Cd and As, but also in maintaining soil quality and ecosystem functions. This study demonstrates the applications of organo-ferrihydrite composites in eco-friendly remediation of CdAs contaminated soils, and provides a new direction in selecting appropriate soil amendments.

Assessment of industrial by-products as amendments to stabilize antimony mine wastes

The spread of antimony from mine wastes to the environment represents a matter of great concern due to its adverse effects on impacted ecosystems. There is an urgent need for developing and adopting sustainable and inexpensive measures to deal with this type of wastes. In this study the Sb leaching behavior of mine waste rocks and mine tailings derived from the exploitation of Sb ore deposits was characterized using standard batch leaching tests (TCLP and EN-12457-4) and column leaching essays. Accordingly, these mine wastes were characterized as toxic (>0.6 mg Sb L^-1) and not acceptable at hazardous waste landfills (>5 mg Sb kg^-1), showing also an ongoing Sb release under prolonged leaching conditions. Two industrial by-products were evaluated as amendments to stabilize them, namely deferrisation sludge (DFS) and a by-product derived from the treatment of aluminum salt slags (BP-Al). Mine wastes were amended with different doses (0-25%) of DFS or BP-Al and the performance of these treatments was evaluated employing also batch and column leaching procedures. The effectiveness of DFS to immobilize Sb was much higher than that exhibited by BP-Al. Thus, treatments with 25% BP-Al showed Sb immobilization levels of approximately 33-53%, whereas treatments with 5 and 25% DFS already attained Sb immobilization levels up to approximately 80-90 and 90-99%, respectively. Mine tailings amended with 5% DFS and mine waste rocks amended with 25% DFS decreased their leachable Sb contents below the limit for non-hazardous waste landfill acceptance (<0.7 mg Sb kg^-1). Likewise, these DFS treatments were able to revert their toxic characterization. Moreover, the 25% DFS treatment showed to be a long-lasting stabilizing system, efficient at least during a leaching period equivalent to 10-year rainfall with a great Sb leaching reduction (close to 98%). After this long-term leaching process, DFS-treated mine wastes kept their non-hazardous and non-toxic characterization. The amorphous Fe (oxyhydr)oxides composing DFS were responsible for the important Sb removal capacity showed by this by-product. Thus, when DFS was applied to mine wastes mobile Sb was importantly fixed as non-desorbable Sb, showing also a considerable Sb removal capacity in presence of strong competing anions such as phosphate. The application of DFS as amendment presents a great potential to be used as a sustainable long-term stabilizing system of Sb mine wastes.

Influence of montmorillonite incorporation on ferrihydrite transformation and Cr(VI) behaviors during ferrihydrite-Cr(VI) coprecipitates aging

Hexavalent chromium (Cr(VI)) is a pollutant with high migration ability, and the destiny of Cr(VI) is highly correlated with ferrihydrite (Fh). Montmorillonite (Mt) is a clay mineral abundantly presents in nature. Although Cr(VI) adsorption on montmorillonite or ferrihydrite has been studied, Cr(VI) behaviors during the Fh-Cr-Mt coprecipitates transformation still remain unknown. In this study, calcium montmorillonite (Ca-Mt) or sodium montmorillonite (Na-Mt) was coprecipitated with ferrihydrite and Cr(VI). Effect of Ca-Mt (or Na-Mt) incorporation on coprecipitates transformation and Cr(VI) behaviors during aging were investigated. The results showed that Ca-Mt or Na-Mt incorporation inhibited the transformation of ferrihydrite in Fh-Cr-Ca-Mt or Fh-Cr-Na-Mt at the initial pH of 5.0, 7.0 and 9.0. During aging, two kinds of Mt were supposed to interact with Fh to form the FeOSi and FeOAl bonds, and thus the formation of hematite and goethite were limited. By testing the Cr(VI) distribution in each phase of coprecipitates during transformation, delay on Cr(VI) migration and redistribution could be found in systems added with montmorillonite, and Cr(VI) was retained in coprecipitates to a greater extent compared with the systems without montmorillonite addition. The results of this study contribute to increasing our knowledge about the role of clay minerals on the coprecipitates transformation when they coexist at different pH values. It is also significant for the heavy metals polluted sites repairing.

Mechanisms of Arsenic and Antimony Co-sorption onto Jarosite: An X-ray Absorption Spectroscopic Study

Jarosite, a common mineral in acidic sulfur-rich environments, can strongly sorb both As(V) and Sb(V). However, little is known regarding the mechanisms that control simultaneous co-sorption of As(V) and Sb(V) to jarosite. We investigated the mechanisms controlling As(V) and Sb(V) sorption to jarosite at pH 3 (in dual and single metalloid treatments). Jarosite was found to sorb Sb(V) to a greater extent than As(V) in both single and dual metalloid treatments. Relative to single metalloid treatments, the dual presence of both As(V) and Sb(V) decreased the sorption of both metalloids by almost 50%. Antimony K-edge EXAFS spectroscopy revealed that surface precipitation of an Sb(V) oxide species was the predominant sorption mechanism for Sb(V). In contrast, As K-edge EXAFS spectroscopy showed that As(V) sorption occurred via bidentate corner-sharing complexes on the jarosite surface when Sb(V) was absent or present at low loadings or by formation of similar complexes on the Sb(V) oxide surface precipitate when Sb(V) was present at high loadings. These results point to a novel mechanism by which Sb(V) impacts the co-sorption of As(V). Overall, these findings highlight a strong contrast in the sorption mechanisms of Sb(V) versus As(V) to jarosite under acidic environmental conditions.

Photoinduced transformation of ferrihydrite in the presence of aqueous sulfite and its influence on the repartitioning of Cd

The photoinduced transformation of ferrihydrite is an important process that can predict the geochemical cycle of Fe in anoxic environments as well as the fate of trace elements bonded to Fe minerals. We report that the photooxidation of sulfite by UV irradiation produces hydrated electrons (super-reductants), which significantly promote ferrihydrite reduction to Fe(II), and SO₃^•- (a moderate oxidant), enabling its further oxidation to more crystalline Fe(III) products. The experimental results show that the concentration of sulfite was key in influencing the rate and extent of surface-bound Fe(II) formation, which ultimately determined the distribution of individual products. For example, fitting of the Mössbauer spectroscopy data revealed that the relative abundances of mineral species after 8 h of treatment in the UV/sulfite systems were 41.9% lepidocrocite and 58.1% ferrihydrite at 2 mM SO₃^2-; 41.8% goethite, 28.2% lepidocrocite, and 29.1% ferrihydrite at 5 mM SO₃^2-; and 100% goethite at 10 mM SO₃^2-. The combined results of the chemical speciation analysis and the Cd K-edge EXAFS characterization provided compelling evidence that Cd was firmly incorporated into the structure of newly formed minerals, particularly at high sulfite concentrations. These findings provide an understanding of the role of UV/sulfite in facilitating ferrihydrite transformation and promoting Cd stabilization in oxygen-deficit soils and aquatic environments.

Antimony(V) Incorporation into Schwertmannite: Critical Insights on Antimony Retention in Acidic Environments

This study examines incorporation of Sb(V) into schwertmannite─an Fe(III) oxyhydroxysulfate mineral that can be an important Sb host phase in acidic environments. Schwertmannite was synthesized from solutions containing a range of Sb(V)/Fe(III) ratios, and the resulting solids were investigated using geochemical analysis, powder X-ray diffraction (XRD), dissolution kinetic experiments, and extended X-ray absorption fine structure (EXAFS) spectroscopy. Shell-fitting and wavelet transform analyses of Sb K-edge EXAFS data, together with congruent Sb and Fe release during schwertmannite dissolution, indicate that schwertmannite incorporates Sb(V) via heterovalent substitution for Fe(III). Elemental analysis combined with XRD and Fe K-edge EXAFS spectroscopy shows that schwertmannite can incorporate Sb(V) via this mechanism at up to about 8 mol % substitution when formed from solutions having Sb/Fe ratios ≤0.04 (higher ratios inhibit schwertmannite formation). Incorporation of Sb(V) into schwertmannite involves formation of edge and double-corner sharing linkages between Sb^VO₆ and Fe^III(O,OH)₆ octahedra which strongly stabilize schwertmannite against dissolution. This implies that Sb(V)-coprecipitated schwertmannite may represent a potential long-term sink for Sb in acidic environments.

Coexisting Goethite Promotes Fe(II)-Catalyzed Transformation of Ferrihydrite to Goethite

In redox-affected soil environments, electron transfer between aqueous Fe(II) and solid-phase Fe(III) catalyzes mineral transformation and recrystallization processes. While these processes have been studied extensively as independent systems, the coexistence of iron minerals is common in nature. Yet it remains unclear how coexisting goethite influences ferrihydrite transformation. Here, we reacted ferrihydrite and goethite mixtures with Fe(II) for 24 h. Our results demonstrate that with more goethite initially present in the mixture more ferrihydrite turned into goethite. We further used stable Fe isotopes to label different Fe pools and probed ferrihydrite transformation in the presence of goethite using ⁵⁷Fe Mössbauer spectroscopy and changes in the isotopic composition of solid and aqueous phases. When ferrihydrite alone underwent Fe(II)-catalyzed transformation, Fe atoms initially in the aqueous phase mostly formed lepidocrocite, while those from ferrihydrite mostly formed goethite. When goethite was initially present, more goethite was formed from atoms initially in the aqueous phase, and nanogoethite formed from atoms initially in ferrihydrite. Our results suggest that coexisting goethite promotes formation of more goethite via Fe(II)-goethite electron transfer and template-directed nucleation and growth. We further hypothesize that electron transfer onto goethite followed by electron hopping onto ferrihydrite is another possible pathway to goethite formation. Our findings demonstrate that mineral transformation is strongly influenced by the composition of soil solid phases.

Study on the precipitation of iron and the synchronous removal mechanisms of antimony and arsenic in the AMD under the induction of carbonate rocks

The ecological environment can be severely polluted and destroyed by the acid mine drainage (AMD) generated during the exploration and utilization of minerals. However, neutralized by carbonate rocks (a natural material in Karst regions), the AMD secondary iron flocs containing a large number of iron oxides or hydroxide can be precipitated in AMD. The metal ions, such as antimony (Sb) and arsenic (As), can be effectively removed by these neutralizing products. In this paper, the neutralization reaction of different acid solutions in an iron-antimony-arsenic system was induced by carbonate rocks to explore the removal effect of metals during this neutralization process. Meanwhile, taking the release amounts of iron (Fe), Sb, and As as well as the phase transformation of minerals at different pH levels as stability indexes, we quantitatively analyzed the chemical stability of AMD neutralizing products (secondary iron flocs) containing Sb and As under the typical acid-base environment (pH = 3.0 ~ 9.0) of AMD and other waters. Results showed that the neutralization reaction with carbonate rocks induced the co-precipitation of Fe with Sb and As. When the concentration ratio of Fe, Sb, and As was 30:1:1, the pH of AMD raised from 3.0 to 7.28 within 72 h, and the three elements were removed by 99%, 85%, and 90%, respectively. After soaking the AMD secondary iron flocs in an acid environment (pH = 3.0) for 30 days, the release amount of Fe reached its peak of 0.070 mg/g. Then, when the pH value increased to 4.0, the As and Sb showed their maximum release amounts of 14.90 µg/g and 19.19 µg/g, respectively. In addition, under acidic conditions, these AMD secondary iron flocs were easily transformed into the goethite with better crystallinity and higher structural stability. This study could help reveal the development of the secondary mineral during the treatment of AMD by carbonate rocks and understand the release characteristics of metals from AMD secondary products containing Sb and As, which sheds light on and provides theoretical foundations for the passive treatment of AMD containing these two elements in the future.

Antimony redox processes in the environment: A critical review of associated oxidants and reductants

The environmental behavior of antimony (Sb) has recently received greater attention due to the increasing global use of Sb in a range of industrial applications. Although present at trace levels in most natural systems, elevated Sb concentrations in aquatic and terrestrial environments may result from anthropogenic activities. The mobility and toxicity of Sb largely depend on its speciation, which is dependent to a large extent on its oxidation state. To a certain extent, our understanding of the environmental behavior of Sb has been informed by studies of the environmental behavior of arsenic (As), as Sb and As have somewhat similar chemical properties. However, recently it has become evident that the speciation of Sb and As, especially in the context of redox reactions, may be fundamentally different. Therefore, it is crucial to study the biogeochemical processes impacting Sb redox transformations to understand the behavior of Sb in natural and engineered environments. Currently, there is a growing body of literature involving the speciation, mobility, toxicity, and remediation of Sb, and several reviews on these general topics are available; however, a comprehensive review focused on Sb environmental redox chemistry is lacking. This paper provides a review of research conducted within the past two decades examining the redox chemistry of Sb in aquatic and terrestrial environments and identifies knowledge gaps that need to be addressed to develop a better understanding of Sb biogeochemistry for improved management of Sb in natural and engineered systems.

Fate of metal-EDTA complexes during ferrihydrite aging: Interaction of metal-EDTA and iron oxides

The widespread presence of ferrihydrite in the environment makes many contaminants including metal-EDTA complexes being adsorbed on it. However, the fate of metal-EDTA complexes during the transformation of ferrihydrite was poorly understood. Understanding the migration and speciation changes of metal-EDTA adsorbed on ferrihydrite during the transformation was helpful to predict its fate in some natural and engineering environments. In this work, the interaction of the two metal-EDTA complexes (Ni(II)-EDTA and Ca(II)-EDTA) and ferrihydrite during the 9-day transformation of ferrihydrite at different pH values was studied. The results showed that part of EDTA complexing metals changed to non-complexed metals during the ferrihydrite transformation, which was due to the fact that metal in the metal-EDTA exchanged with Fe(III) on ferrihydrite. Besides, different speciation of metal ions migrated during the transformation of ferrihydrite. Meanwhile, Fe(III)-EDTA formed in this process, and the exchange of metal in Ca(II)-EDTA with Fe(III) in ferrihydrite was faster than that of Ni(II)-EDTA. Besides, the presence of metal-EDTA affected the transformation rate of ferrihydrite under neutral and alkaline condition, and metal-EDTA accelerated the dissolution of ferrihydrite to form goethite. Therefore, ferrihydrite and metal-EDTA influenced each other during the transformation of ferrihydrite. The results of this work revealed that the process of metal-EDTA dissolving ferrihydrite not only included the dissociation of metal-EDTA, but also involved the migration of metal ions and affected the transformation of ferrihydrite.

Mechanistic Study for Antimony Adsorption and Precipitation on Hematite Facets

Heterogeneous reactions at the mineral-water interface are of paramount importance in controlling the transport of contaminants. Herein, antimony (Sb) adsorption and subsequent precipitation on Fe₂O₃ facets were explored to understand its partitioning mechanisms by multiple complementary techniques. Our extended X-ray absorption fine structure spectroscopy and density functional theory results provided a consensus on the local coordination environment of Sb(III) and Sb(V) on Fe₂O₃ facets. We observed that Sb adsorption and the following precipitation are associated with both Sb concentrations and Fe₂O₃ facets, and a change in the Sb surface-binding mode from edge-sharing to corner-sharing is preferred in precipitation. Fe₂O₃ facets determine Sb binding structures, resulting in a facet-dependent transformation of adsorption to precipitation. The preferred corner-sharing complexes on the {001} facet facilitated the formation of Sb₂O₃ and NaSb(OH)₆ precipitates at a lower Sb concentration compared with other two {110} and {214} facets. In addition, the facet-specific binding configuration renders a heterogeneous epitaxial growth of Sb₂O₃. Our study provides a molecular understanding of facet effects on Sb adsorption and precipitation on minerals.

Nano zero-valent iron-induced changes in soil iron species and soil bacterial communities contribute to the fate of Cd

Nano zero-valent iron (nZVI) is used for soil remediation; however, the impact of nZVI on soil solid iron phases and its interactions with soil microorganisms in relation to the fate of Cd in soil remains unclear. In the current study, we investigated the mechanisms underlying the change in mobility of Cd in exogenous Cd-contaminated soil with nZVI and γ radiation treatments. The results showed that nZVI treatment decreased Cd availability but also increased the soil pH and dissolved Mn and poorly crystalline Fe contents. However, the increased poorly crystalline Fe(II) levels contributed to a reduction in Cd availability in soils treated with nZVI by immobilizing Cd associated with Fe oxides, rather than by increasing pH or Mn oxide levels. Moreover, Cd stabilization efficiency was higher in γ-irradiated soils than in non-irradiated soils regardless of the Cd level, with noticeable differences in bacterial community composition between the non-irradiated and irradiated soils. The genera Bacillus, Pullulanibacillus, and Alicyclobacillus are important in the redox of poorly crystalline Fe(II)-containing minerals in non-irradiated soil. This research provides a new method for further improving the Cd stabilization efficiency of nZVI in combination with microbial iron oxidization inhibitors.

Facile co-removal of As(V) and Sb(V) from aqueous solution using Fe-Cu binary oxides: Structural modification and self-driven force field of copper oxides

Currently, the environmental and ecological damage caused by As(V) and Sb(V) co-contamination has attracted widespread attention worldwide. Due to the similar intrinsic structure configuration and electrostatic repulsion of As(V) and Sb(V), the long-standing issue of their low co-removal capacity remains unresolved. In this study, novel Fe-Cu (FC) binary materials with varied Fe/Cu proportions were synthesized via a simple co-precipitation method to co-eliminate aquatic As(V) and Sb(V). A 2/1 ratio of Fe/Cu was determined to be a suitable proportion with a higher co-adsorption capacity, specifically 70.9 mg·g^-1 for As(V) and 94.3 mg·g^-1 for Sb(V). Detailed morphological and structural analyses indicated that the FC material gradually changed from microscale aggregates to nanoscale spheres with increasing Cu content, accompanied by an increasing crystalline degree and higher surface area. Additionally, the transformation of amorphous ferrihydrite (FO) into FeO(OH) was suppressed by Fe-Cu complexion during the co-adsorption process, in which ferrihydrite (FO) had more adsorption sites than FeO(OH). In addition, the addition of Cu promoted the pH_pzc of FC materials from the acidic range into the neutral or alkaline range. The increased potential difference of FC materials accelerated the As(V) and Sb(V) diffusion rate and effectively offset native electrostatic repulsion, which exhibited a considerable effect than the adsorption sites. Through detailed kinetic data analysis, it was determined that the proportion of the diffusion layer thickness around Sb(V) was suppressed to the As(V) level, and the adsorption kinetics of the two species were both promoted by the self-driven force field. All the results indicated that the co-adsorption capacity depended on the coupling contribution of Fe and Cu, where Fe oxide acted as the major adsorption potential and Cu provided a self-driven force for As(V) and Sb(V) diffusion. This study may provide a novel prospective for homogeneous metal ion co-removal.

Contradictory tendency of As(V) releasing from Fe-As complexes: Influence of organic and inorganic anions

The strong ability of ferrihydrite and its aged minerals for fixing arsenate is a key factor in remediating arsenate-polluted environments. It is therefore crucial to clarify the stability of Fe-As complexes and the release conditions for As(V). The As(V) release amount was evaluated and compared in the presence of six representative anions, namely, phosphate, silicate, sulfate, inositol hexaphosphate, citrate, and oxalate. It was found that the As(V) release amount changed with the aging time of ferrihydrite and that this tendency generally followed two rules. These are, longer aging time leads to lower As(V) release (Rule 1), and longer aging time leads to higher As(V) release (Rule 2). Whether Rule 1 or Rule 2 dominated As release depended on the number of surface groups, size of competing anions, and contribution of As(V) re-adsorption. Characterization results using X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) provided evidence for the predicted mechanisms of As(V) release under various circumstances. In this work, it was demonstrated that when inorganic anions such as sulfate and silicate are present, ferrihydrite with longer aging time led to decreased As(V) release. When organic anions are present, ferrihydrite with less aging time results in reduced As(V) leaching. For anions such as phosphate, the As(V) release amount in relation to the ferrihydrite aging time depends on the concentration of phosphate ions. Nevertheless, the ligand concentration and As(V) loading rate on ferrihydrite should be simultaneously considered for the rule governing As(V) releasing.

Evaluating the metabolic functional profiles of the microbial community and alfalfa (Medicago sativa) traits affected by the presence of carbon nanotubes and antimony in drained and waterlogged sediments

Antimony (Sb) is the ubiquitous re-emerging contaminant greatly accumulated in sediments which has been revealed risky to ecological environment. However, the impacts of Sb (III/V) on microbes and plants in sediments, under different water management with presence of engineering materials are poorly understood. This study conducted sequential incubation of sediments (flooding, draining and planting) with presence of multiwall carbon nanotubes (MWCNTs) and Sb to explore the influence on microbial functional diversity, Sb accumulation and alfalfa traits. Results showed that water management and planting led to greater impacts of sediment enzyme activities and microbial community metabolic function and bioavailable Sb fractions (defined as sum of acid-soluble fraction and reducible fraction, F1 + F2). Available fractions of Sb (V) showed higher correlation to microbial metabolism (r = 0.933) than that of Sb (III) (r = -0.480) in planting stage. MWCNTs with increasing concentrations (0.011%, w/w) positively correlated to microbial community metabolic function in planting stage whereas resulted in decreasing of Sb (III/V) concentrations in alfalfa, although 0.01% MWCNT led to increase of Sb (V) and decrease of Sb (V) by 50.97% and 32.68% respectively. This study provided information for investigating combined ecological impacts of heavy metal and engineering materials under different water managing sediments.

Mn-incorporated ferrihydrite for Cr(VI) immobilization: Adsorption behavior and the fate of Cr(VI) during aging

Chromium(VI) (Cr(VI)) is an environmental priority pollutant, and its mobility in natural environment is strongly controlled by ferrihydrite. Ferrihydrite always contains various ions, which may change the properties of ferrihydrite, thereby affecting the behavior of pollutants. This study aims to investigate the adsorption of Cr(VI) by Mn-incorporated ferrihydrite and the mobility behavior of Cr(VI) during aging. Results showed that the incorporation of Mn enhanced the adsorption of Cr(VI) on ferrihydrite, and the adsorption performance increased with the increase of Mn content. The maximum adsorption capacity for Cr(VI) reached to 48.5 mg/g with molar ratio of Mn/Fe 5%, while it was 36.1 mg/g for pure ferrihydrite. After aging for 7 days, ferrihydrite transformed into goethite and hematite. The adsorbed Cr(VI) on the surface of ferrihydrite was released into the solution during aging. The incorporation of Mn retarded the transformation of ferrihydrite, which inhibited the migration of adsorbed Cr(VI). Nevertheless, the incorporation of Mn resulted in the transformation of adsorbed Cr(VI) to non-desorbed Cr(VI), thereby enhancing the retention of Cr(VI). Our results suggest that the incorporation of Mn into ferrihydrite has an important role on the mobility of Cr(VI), which enhances our understanding of the behavior of Cr(VI) in the environment.

Antimonate Controls Manganese(II)-Induced Transformation of Birnessite at a Circumneutral pH

Manganese (Mn) oxides, such as birnessite (δ-MnO₂), are ubiquitous mineral phases in soils and sediments that can interact strongly with antimony (Sb). The reaction between birnessite and aqueous Mn(II) can induce the formation of secondary Mn oxides. Here, we studied to what extent different loadings of antimonate (herein termed Sb(V)) sorbed to birnessite determine the products formed during Mn(II)-induced transformation (at pH 7.5) and corresponding changes in Sb behavior. In the presence of 10 mM Mn(II)_aq, low Sb(V)_aq (10 μmol L^-1) triggered the transformation of birnessite to a feitknechtite (β-Mn(III)OOH) intermediary phase within 1 day, which further transformed into manganite (γ-Mn(III)OOH) over 30 days. Medium and high concentrations of Sb(V)_aq (200 and 600 μmol L^-1, respectively) led to the formation of manganite, hausmannite (Mn(II)Mn(III)₂O₄), and groutite (αMn(III)OOH). The reaction of Mn(II) with birnessite enhanced Sb(V)_aq removal compared to Mn(II)-free treatments. Antimony K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy revealed that heterovalent substitution of Sb(V) for Mn(III) occurred within the secondary Mn oxides, which formed via the Mn(II)-induced transformation of Sb(V)-sorbed birnessite. Overall, Sb(V) strongly influenced the products of the Mn(II)-induced transformation of birnessite, which in turn attenuated Sb mobility via incorporation of Sb(V) within the secondary Mn oxide phases.

Oxidation and incorporation of adsorbed antimonite during iron(II)-catalyzed recrystallization of ferrihydrite

The toxicity and mobility of antimony (Sb) are strongly influenced by the redox transformation of widely spread 2-line ferrihydrite (Fh) in natural soils and sediments. This study investigated the transformation and redistribution of adsorbed antimonite (Sb(III)) during Fe(II)-catalyzed recrystallization of Fh under anaerobic conditions. X-ray diffraction (XRD), transmission electron microscopy (TEM), and synchrotron based X-ray absorption spectroscopy (XAS) were utilized to characterize the mineralogy and morphology of generated minerals as well as the speciation of Sb and Fe. Chemical analysis and Sb L_III-edge XANES spectra demonstrated that a great part of Sb(III) (80%-90%) was oxidized to Sb(V) by reactive oxygen species (ROS) during the Fe(II)-catalyzed transformation of Fh. Chemical extraction results showed that the mobility of Sb was significantly reduced with 50%-70% of initially adsorbed Sb(III) transformed to phosphate-unextractable phase. Antimony K-edge EXAFS analysis showed the SbO₆ octahedra were incorporated into secondary minerals by substituting the Fe atoms. Our findings shed new light on the understanding of the geochemical behavior of Sb(III) under anoxic conditions.

Migration behavior of Cr(VI) during the transformation of ferrihydrite-Cr(VI) co-precipitates: The interaction between surfactants and co-precipitates

Redistribution of Cr(VI) in ferrihydrite-Cr(VI) co-precipitates (Fh-Cr) was affected by co-precipitates transformation and coexisting substances. These effects were crucial for predicting the migration path of Cr(VI) in ferrihydrite-Cr(VI) co-precipitates. This work investigated the effects of the extensively used surfactants of anionic surfactant sodium dodecylbenzene sulfonate (SDBS) and cationic surfactant cetyltrimethylammonium bromide (CTAB) on the Fh-Cr transformation and redistribution of Cr(VI) for 10 days at different pH values (5.0, 7.5 and 9.0) and concentration of surfactants (0.5, 2.0 and 5.0 mM). The results showed that SDBS hindered the transformation of Fh-Cr to hematite and tended to transform into goethite. SDBS inhibited hematite formation by inhibiting the aggregation of Fh-Cr particles, and it enhanced the dissolution of Fh-Cr to facilitate the formation of goethite. Affected by the inhibition of Fh-Cr transformation, the process of Cr(VI) redistribution was delayed. CTAB did not affect the transformation of Fh-Cr, but allowed more Cr(VI) to enter the interior of iron minerals. When the surfactants were adsorbed on the Fh-Cr, SDBS decreased the adsorption of Cr(VI) by Fh-Cr, while CTAB increased the Cr(VI) adsorption. The findings of this study contribute to understand the effects of surfactants on the transformation of Fh-Cr and the behaviors of Cr(VI) during this process.

Impact of Antimony(V) on Iron(II)-Catalyzed Ferrihydrite Transformation Pathways: A Novel Mineral Switch for Feroxyhyte Formation

The environmental mobility of antimony (Sb) is controlled by interactions with iron (Fe) oxides, such as ferrihydrite. Under near-neutral pH conditions, Fe(II) catalyzes the transformation of ferrihydrite to more stable phases, thereby potentially altering the partitioning and speciation of associated Sb. Although largely unexplored, Sb itself may also influence ferrihydrite transformation pathways. Here, we investigated the impact of Sb on the Fe(II)-induced transformation of ferrihydrite at pH 7 across a range of Sb(V) loadings (Sb:Fe(III) molar ratios of 0, 0.003, 0.016, and 0.08). At low and medium Sb loadings, Fe(II) induced rapid transformation of ferrihydrite to goethite, with some lepidocrocite forming as an intermediate phase. In contrast, the highest Sb:Fe(III) ratio inhibited lepidocrocite formation, decreased the extent of goethite formation, and instead resulted in substantial formation of feroxyhyte, a rarely reported FeOOH polymorph. At all Sb loadings, the transformation of ferrihydrite was paralleled by a decrease in aqueous and phosphate-extractable Sb concentrations. Extended X-ray absorption fine structure spectroscopy showed that this Sb immobilization was attributable to incorporation of Sb into Fe(III) octahedral sites of the neo-formed minerals. Our results suggest that Fe oxide transformation pathways in Sb-contaminated systems may strongly differ from the well-known pathways under Sb-free conditions.

Influence of Al(III) and Sb(V) on the transformation of ferrihydrite nanoparticles: Interaction among ferrihydrite, coprecipitated Al(III) and Sb(V)

Ferrihydrite is ubiquitous in natural environments and is usually co-precipitated with impure ions and toxic contaminants like Al(III) and Sb(V) during the neutralization process of acid mine drainage. However, little is known about the dynamic interactions among ferrihydrite, Al(III) and Sb(V). In this study, the influence of coprecipitated Al(III) and Sb(V) on the transformation of ferrihydrite was investigated. The samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and transmission electron microscopy before and after aging for 10 days at 70 °C. Results indicated that the Al(III) enhanced the immobilization of Sb(V) under neutral and alkaline conditions, and the presence of Sb(V) induced more production of extractable Al(III). XRD patterns revealed that the transformation rate of coprecipitated Al(III) and Sb(V) ferrihydrite was higher than Al-coprecipitated ferrihydrite. It is speculated that the presence of Sb(V) weakened the inhibition of Al(III) under experimental conditions. Competitive reaction of Al(III) and Sb(V) for substitution on the lattice Fe of ferrihydrite, likely decreased Al(III) substitution on ferrihydrite, and thus increased the observed transformation rate of ferrihydrite. These results have significant environmental implications for predicting the role of impurities and contaminants on ferrihydrite transformation processes.

Reduction of Sb(V) by coupled biotic-abiotic processes under sulfidogenic conditions

Increasing use and mining of antimony (Sb) has resulted in greater concern involving its fate and transport in the environment. Antimony(V) and (III) are the two most environmentally relevant oxidation states, but little is known about the redox transitions between the two in natural systems. To better understand the behavior of antimony in anoxic environments, the redox transformations of Sb(V) were studied in biotic and abiotic reactors. The biotic reactors contained Sb(V) (2 mM as KSb(OH)₆), ferrihydrite (50 mM Fe(III)), sulfate (10 mM), and lactate (10 mM), that were inoculated with sediment from a wetland. In the abiotic reactors, The interaction of Sb(V) with green rust, magnetite, siderite, vivianite or mackinawite was examined under abiotic conditions. Changes in the concentrations of Sb, Fe(II), sulfate, and lactate, as well as the microbial community composition were monitored over time. Lactate was rapidly fermented to acetate and propionate in the bioreactors, with the latter serving as the primary electron donor for dissimilatory sulfate reduction (DSR). The reduction of ferrihydrite was primarily abiotic, being driven by biogenic sulfide. Sb and Fe K-edge X-ray absorption near edge structure (XANES) analysis showed reduction of Sb(V) to Sb(III) within 4 weeks, concurrent with DSR and the formation of FeS. Sb K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy analysis indicated that the reduced phase was a mixture of S- and O-coordinated Sb(III). Reduction of Sb(V) was not observed in the presence of magnetite, siderite, or green rust, and limited reduction occurred with vivianite. However, reduction of Sb(V) to amorphous Sb(III) sulfide occurred with mackinawite. These results are consistent with abiotic reduction of Sb(V) by biogenic sulfide and reveal a substantial influence of Fe oxides on the speciation of Sb(III), which illustrates the tight coupling of Sb speciation with the biogeochemical cycling of S and Fe.

Reductive transformation of birnessite and the mobility of co-associated antimony

Manganese (Mn) oxide minerals, such as birnessite, are thought to play an important role in affecting the mobility and fate of antimony (Sb) in the environment. In this study, we investigate Sb partitioning and speciation during anoxic incubation of Sb(V)-coprecipitated birnessite in the presence and absence of Mn(II)_aq at pH 5.5 and 7.5. Antimony K-edge XANES spectroscopy revealed that Sb(V) persisted as the only solid-phase Sb species for all experimental treatments. Manganese K-edge EXAFS and XRD results showed that, in the absence of Mn(II), the Sb(V)-bearing birnessite underwent no detectable mineralogical transformation during 7 days. In contrast, the addition of 10 mM Mn(II) at pH 7.5 induced relatively rapid (within 24 h) transformation of birnessite to manganite (~93%) and hausmannite (~7%). Importantly, no detectable Sb was measured in the aqueous phase for this treatment (compared with up to ∼90 μmol L^-1 Sb in the corresponding Mn(II)-free treatment). At pH 5.5 , birnessite reacted with 10 mM Mn(II)_aq displayed no detectable mineralogical transformation, yet had substantially increased Sb retention in the solid phase, relative to the corresponding Mn(II)-free treatment. These findings suggest that the Mn(II)-induced transformation and recrystallization of birnessite can exert an important control on the mobility of co-associated Sb.

Natural organic matter inhibits Ni stabilization during Fe(II)-catalyzed ferrihydrite transformation

Trace metals, such as nickel (Ni), are often found associated with ferrihydrite (Fh) in soil and sediment and have been shown to redistribute during Fe(II)-catalyzed transformation of Fh. Fe(II)-catalyzed transformation of Fh, however, is often inhibited when natural organic matter (NOM) is associated with Fh. To explore whether NOM affects the behavior of Ni during Fe(II)-catalyzed transformation of Fh, we tracked Ni distribution, Fe atom exchange, and mineral transformation of Fh and Fh coprecipitated with Suwannee River natural organic matter (SRNOM-Fh). As expected, in the absence of Fe(II), Fh and SRNOM-Fh did not transform to secondary Fe minerals after two weeks. We further observed little difference in Ni adsorption on SRNOM-Fh compared to Fh. In the presence of Fe(II), however, we found that Ni associated with SRNOM-Fh was more susceptible to acid extraction than Fh. Specifically, we found almost double the amount of Ni remaining in the Fh after mild extraction compared to SRNOM-Fh. XRD showed that Fh transformed to goethite and magnetite whereas SRNOM-Fh did not transform despite ⁵⁷Fe isotope tracer experiments confirmed that SRNOM-Fh underwent extensive atom exchange with aqueous Fe(II). Our findings suggest that Fe atom exchange may not be sufficient for obvious Ni stabilization and that transformation to secondary minerals may be necessary for Ni stabilization to occur.

Recent progress in understanding the mechanism of heavy metals retention by iron (oxyhydr)oxides

Heavy metals are widespread toxic environmental pollutants that can generate enormous health and public concern. Iron (oxyhydr)oxides are ubiquitous in both natural and engineered environments and have great retention capacity of heavy metals due to their high surface areas and reactivity. The sequestration of heavy metal by iron (oxyhydr)oxides is one of the most vital geochemical/chemical processes controlling their environmental fate, transport, and bioavailability. In this review, some of the common iron (oxyhydr)oxides are introduced in detail in terms of their formation, occurrence, structure characteristics and interaction with heavy metals. Moreover, the retention mechanisms of metal cations (e.g., Pb, Cu, Cd, Ni, Zn), metal oxyanions (e.g., As, Sb, Cr), and coexisting multiple metals on various iron (oxyhydr)oxides are fully reviewed. Principal mechanisms of surface complexation, surface precipitation and structural incorporation are responsible for heavy metal retention on iron (oxyhydr)oxides, and greatly dependent on mineral species, metal ion species, reacting conditions (i.e., pH, heavy metal concentration, ionic strength, etc.) and chemical process (i.e., adsorption, coprecipitaton and mineral phase transformation process). The retention mechanisms summarized in this review would be helpful for remediating heavy metal contamination and predicting the long-term behavior of heavy metal in natural and engineered environments.

Abiotic mediation of common ions on the co-exposure of CeO2 NPs with Sb (III) or Sb (V) to Glycine max (Linn.) Merrill. (Soybean): Impacts on uptake, accumulation and physiochemical characters

With the most active Sb mines, the "dominance" on Sb production of China lead to increasingly release and omnipresence of Sb in environment through mining activities as well as the life cycle of Sb-containing productions. The introduction of engineered nanoparticles (ENPs) accidentally or intentionally (such as NP-containing sludge as fertilizer) might increase the probability of co-exposed with Sb to plants. In this study, CeO2 NPs, one of the most widely used nanomaterials in industries with potential oxidizing or reducing properties, was selected and co-exposed with Sb (III) or Sb (V) to investigate their mutual effects on uptake, accumulation and physiological effects in soybeans. The results showed that CeO2 NPs increased the Sb (III) and Sb (V) concentrations in roots by 36.7% and 14.0% respectively, while Sb (III) and Sb (V) inhibited the concentration of Ce in roots by 97.1% and 86.9% respectively. In addition, the impacts of extra common ions (Mn2+, Cu2+, Fe3+ and Zn2+) on the fate of Ce and Sb in soybeans in co-exposure of CeO2 NPs with Sb were investigated as well. Mn2+ and Fe3+ increased the accumulations of Ce and Sb (III) in the co-exposure of CeO2 NPs with Sb (III), but reduced that in the co-exposure of CeO2 NPs with Sb (V). Notably, the addition of Cu2+ and Zn2+ consistently increased the uptake and accumulation of Ce and Sb in the co-exposure treatments. Moreover, the effects of Sb on the dissolved portion of CeO2 NPs in soybean roots were also investigated. This study provided a perspective that extra ingredient (mineral elements, organic element or other nutrients) might regulated the interactions in ENPs-heavy metals-plants system which need further explorations.

Reduction of bioaccessibility of As in soil through in situ formation of amorphous Fe oxides and its long-term stability

The bioaccessibility of As in soil, rather than its total concentration, is closely related to its potential risk. In this study, the in situ formation of amorphous Fe oxides was applied to As-contaminated soil to induce As-Fe coprecipitates that can withstand the gastric digestion condition of human beings. To promote the formation of Fe oxides, 2% ferric nitrate (w/w) and 30% water (v/w) were introduced, and the pH was adjusted to ~7. The chemical extractability of As in soil was determined using the solubility/bioavailability research consortium method and five-step sequential extraction. In situ formation of Fe oxides resulted in a remarkable increase in the As associated with amorphous Fe oxides, decreasing most of the exchangeable As (i.e., the sum of SO₄^2- and PO₄^3- extractable As), and thereby reducing the bioaccessibility of As. The types of association between As and Fe oxides were investigated using X-ray absorption spectroscopy analysis. Linear combination fit (LCF) analysis demonstrated that As bound to amorphous Fe oxides could exist as coprecipitates with ferrihydrite and schwertmannite after stabilization. The bioaccessibility of the coprecipitated As in soil further decreased as amorphous Fe oxides transformed to crystalline form with time, which was supported by the LCF results showing an increase of goethite in aged soil.

Adsorption of antimonite and antimonate from aqueous solution using modified polyacrylonitrile with an ultrahigh percentage of amidoxime groups

Porous modified polyacrylonitrile (PAN) with an ultrahigh percentage of amidoxime groups (UAPAN) was synthesized for the first time and used to adsorb antimonite (Sb(III)) and antimonate (Sb(V)) from aqueous solution. Fourier transform infrared (FT-IR), Zeta potential, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) were adopted to characterize UAPAN and explore adsorption mechanism. Moreover, batch experiments were performed to investigate the influence of various adsorption parameters, including initial pH, contact time, temperature, coexisting ions and reusability on adsorption capacities. Results showed that the maximum adsorption capacities for Sb(III) and Sb(V) were 125.4 and 177.3 mg g^-1, respectively, which were much higher than those of other adsorbents reported in literature. The adsorption thermodynamics was evaluated, indicating the spontaneous and endothermic adsorption. The adsorption isotherm was suitable to be modeled by Langmuir isotherm (R² > 0.96). Results of FT-IR, Zeta potential and XPS indicated that adsorption was involved with electric charge attraction and ligand exchange. DFT further explained that better adsorption of Sb(V) on UAPAN than that of Sb(III) was caused by the higher adsorption energy, more favorable bond lengths and atom charge density. Accordingly, UAPAN is expected to be a compelling candidate for antimony decontamination from aqueous environment.

Antimony and arsenic speciation, redox-cycling and contrasting mobility in a mining-impacted river system

The Macleay River in eastern Australia is severely impacted by historic stibnite- and arsenopyrite-rich mine-tailings. We explore the partitioning, speciation, redox-cycling, mineral associations and mobility of antimony and arsenic along >70 km reach of the upper Macleay River. Elevated Sb/As occur throughout the active channel-zone and in floodplain pockets up to the regolith margin, indicating broad dispersal during floods. Sb concentrations in bulk-sediments decay exponentially downstream more efficiently than As, likely reflecting sediment dilution, hydraulic sorting and comparatively greater leaching of (more mobile) Sb(V) species. However, Sb in bulk-sediments becomes proportionally more bio-available downstream. Sb(V) and As(V) species dominate stream fine-grained (<180 μm) bulk-sediments, reflecting oxidative weathering downstream. Increasing poorly-crystalline Fe(III) [Fe(III)_HCl] in bulk-sediments also indicates progressive oxidative weathering of Fe(II)-bearing minerals downstream and significant (P < .05) correlations exist between PO₄^-3-exchangeable As and Sb fractions and Fe(III)_HCl. Accumulations of poorly-crystalline Fe(III) precipitates (mainly ferrihydrite/feroxyhyte) occur intermittently in hyporheic-zone seeps and are enriched in As relative to Sb and contain some As(III) and Sb(III) (~30-40%). There is dynamic in-stream redox-cycling of both Sb and As, with localised S-coordinated As and Sb species re-forming in organic-rich, hyporheic sediments subject to contemporary sulfidogenesis. Sb [mainly Sb(V)] is comparatively more mobile in hyporheic and surface waters under oxic conditions, whereas As [mainly As(III)] is more mobile in hyporheic porewaters subject to reducing/sulfidogenic conditions. Repeat water-leaching of bulk-sediments confirms that Sb is proportionally more mobile than As. Mean concentrations of Sb in river water 168 km downstream from the mine are significantly (P < .05) higher than As, while K_d data indicate Sb is more strongly partitioned to the aqueous phase than As. Although the (mainly) oxic flow path of this river favours aqueous Sb mobility compared to As, localised redox-driven shifts in speciation of both elements strongly influence their respective mobility and partitioning.

Stabilization and transformation of selenium during the Fe(II)-induced transformation of Se(IV)-adsorbed ferrihydrite under anaerobic conditions

Selenium (Se) is an essential nutrient for human beings at trace concentrations, but also a hazardous contaminant at high concentrations. As an important geological adsorbent, the transformation of 2-line ferrihydrite (Fh) strongly influences the geochemical behavior of selenium. However, little is known about the effect of the recrystallization of Fh on the fate of adsorbed Se(IV) in the reducing environments. We investigated the redistribution and transformation of Se(IV) during the recrystallization of Se(IV)-adsorbed Fh accelerated by Fe(II) under anaerobic conditions. Synchrotron based X-ray absorption near edge structure (XANES) spectroscopy was utilized to characterize oxidation state of Se. Results revealed that the adsorbed Se(IV) inhibited the Fe(II)-catalyzed recrystallization of ferrihydrite to goethite. Transmission electron microscopy (TEM) images showed that pH and the presence of Se(IV) had significant impacts on the morphology of the produced goethite. Approximately 30-75% adsorbed Se(IV) transformed to phosphate-unextractable form, indicating that the adsorbed Se transformed to more stable phase during the recrystallization of Fh. The XANES results indicated that a small fraction of Se(IV) was reduced to elemental Se. Our study demonstrated that the stability of adsorbed Se(IV) on ferrihydrite could be enhanced during Fe(II)-catalytic transformation of Fh under anoxic environments.

Soil organic matter affects arsenic and antimony sorption in anaerobic soils

Soil organic matter (SOM) affects arsenic (As) and antimony (Sb) mobility in soils under waterlogged conditions by acting as an electron donor, by catalyzing redox-cycling through electron shuttling and by acting as a competing ligand. This study was set up to disentangle these different effects of SOM towards As and Sb sorption in anaerobic soils. Nine samples were taken at different depths in an agricultural soil profile to collect samples with a natural SOM gradient (<1-40 g soil organic carbon kg^-1). The samples were incubated either or not under waterlogged conditions in an anaerobic chamber for 63-70 days, and glucose (5 g C kg^-1) was either or not added to the anaerobic incubated samples as an electron donor that neither acts as an electron shuttle nor as a competing ligand. The solid-liquid distribution coefficients (K_D) of As and Sb were measured at trace levels. The K_D values of As decreased ∼2 orders of magnitude upon waterlogging the SOM rich topsoil, while no additional changes were observed when glucose was added. In contrast, smaller changes in the As K_D values were found in the low SOM containing subsoil samples, unless glucose was added that mobilised As. The Sb K_D values increased upon reducing conditions up to factor 20, but again only in the high SOM topsoil samples. Surprisingly, the Sb immobilisation during waterlogging only occurred in Sb amended soils whereas the geogenic Sb was mobilised upon reducing conditions, although total dissolved Sb concentrations remained low (<10 nM). The change in As and Sb sorption upon waterlogging was similar in the SOM rich topsoil as in the low SOM subsoil amended with glucose. This suggests that the SOM dependent changes in As and Sb mobility in response to soil waterlogging are primarily determined by the role of SOM as electron donor.

Three-dimensional transfer of Cr(VI) co-precipitated with ferrihydrite containing silicate and its redistribution and retention during aging

Understanding the redistribution and retention of chromium(VI) (Cr(VI)) co-precipitated with silicate-containing ferrihydrite during aging is essential to the stabilization and immobilization of Cr(VI) in nature. In this work, Cr(VI) was removed by co-precipitated with silicate-containing ferrihydrite with various Si/Fe ratios at different precipitating pH. The co-precipitates were characterized by X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy before and after aging for 9 days at 80 °C. Results showed that silicate not only competed with Cr(VI) adsorbed on ferrihydrite surface by forming inner-sphere complexes, but also inhibited ferrihydrite transforming into more stable and compact iron phases. Ferrihydrite only transformed to hematite at pH₀ 5.0, and converted to hematite and goethite at pH₀ 7.5 and 10.0. Cr(VI) was initially removed by silicate-containing ferrihydrite with the removal efficiencies > 99.64% at initial pH of 5.0, and it was obviously incorporated into hematite and goethite during the transformation of ferrihydrite. The transformation products influenced the redistribution of Cr(VI), which was beneficial to the retention of Cr(VI) inside the co-precipitates, but not conducive to the adsorption for Cr(VI). The findings that Cr(VI) was removed by a common and metastable precursor of silicate-containing ferrihydrite can promote understanding of three-dimensional transfer and behavior of Cr(VI) during the transformation of silicate-containing ferrihydrite.

Antimony speciation and mobility during Fe(II)-induced transformation of humic acid-antimony(V)-iron(III) coprecipitates

Antimony, as the Sb(V) species, often occurs in oxic soils and sediments as coprecipitates with poorly-crystalline Fe(III)-bearing minerals. It is common for these Sb(V)-Fe(III) coprecipitates to also contain varying quantities of co-occurring humic acid (HA). When exposed to reducing conditions, the production of Fe(II) may cause the initial metastable HA-Sb(V)-Fe(III) phases to undergo rapid transformations to more stable phases, thereby potentially influencing the geochemical behavior of coprecipitated Sb(V). However, little is known about the impacts of this transformation on the mobility and speciation of Sb. In this study, we reacted synthetic HA-Sb(V)-Fe(III) coprecipitates (Fe:Sb ratio = 4, and C:Fe molar ratios = 0, 0.3, 0.8 and 1.3) with 0, 1 or 10 mM Fe(II) under O₂-free conditions at pH 7.0 for 15 days. Fe K-edge EXAFS spectroscopy revealed that solid-phase Fe(III) in the initial coprecipitates contained a mixture of ∼4/5 ferrihydrite (Fe₁₀O₁₄(OH)₂) and ∼1/5 tripuhyite (FeSbO₄), regardless of the corresponding amount of coprecipitated HA. Tripuhyite persisted throughout the full experiment duration, while ferrihydrite was partially replaced by goethite (FeOOH) when either 1 or 10 mM Fe(II)_aq was added to the coprecipitates. The greatest level of goethite formation (∼55% of solid-phase Fe) was observed in the HA-free/10 mM Fe(II)_aq treatment, with ferrihydrite transformation being partially attenuated at higher levels of HA. Mobilisation of aqueous Sb was the greatest for 1 mM Fe(II) treatments at high HA:Fe ratios. Sb K-edge XANES spectroscopy showed that the largest reduction of Sb(V) to Sb(III) (∼37%) and the greatest repartitioning of Sb to the mineral surface (∼7.9-9.8%) occurred in the coprecipitates with the highest HA contents in the presence of 10 mM Fe(II). The results indicate that the amount of HA in HA-Sb(V)-Fe(III) coprecipitates can greatly influence mobility and speciation of Sb in Fe(II)-rich conditions. The results of this study provide new insights into alterations in Sb mobility and retention in response to Fe cycling under organic matter-rich reducing conditions.

Applications and characteristics of Fe-Mn binary oxides for Sb(V) removal in textile wastewater: Selective adsorption and the fixed-bed column study

In this study, the selective adsorption performance of different Fe-Mn binary oxides (FMBOs) towards Sb(V) in the textile wastewater under different concentrations of coexisting anions, surfactants and dyes were investigated. Results showed that the influences of different anions on the Sb(V) removal followed an order of phosphate > carbonate > sulfate > nitrate > chloride. The frequently-used organic acid of acetate was found to have insignificant effect. The coexisting surfactant with sulfonic groups could have adverse effect on the removal due to sulfonic groups could compete the adsorptive sites on Fe oxides with Sb(V). While the quaternary ammonium surfactant might have minor effect. The influences of the three widely used dyes on the Sb(V) adsorption decreased in the following order: reactive black-5 >acid orange-7> disperse blue-60, which confirmed that the dyes with sulfonic groups would have relatively higher effect. The selective adsorption capacities of Sb(V) by FMBOs followed an order of FMBO₃> FMBO₅ >FMBO₁₀> FMBO₂₀>PFO. Fixed-bed column adsorption supplied useful parameters and evidently indicated that the cyclic utilization of FMBO₃ was cost-efficient for practical dynamic Sb(V) removal. The Sb(V) removal by FMBO₃ from real textile wastewater can simultaneously improve the removal efficiency, stabilize pH and prevent the increase of iron concentration as compared to the traditional coagulation, further demonstrating the high practical applicability of FMBO₃.

Humic acid impacts antimony partitioning and speciation during iron(II)-induced ferrihydrite transformation

The Fe(II)-induced transformation of ferrihydrite, a potent scavenger for antimony (Sb), can considerably influence Sb mobility in reducing soils, sediments and groundwater systems. In these environments, humic acids (HA) are prevalent, yet their influence on Sb behaviour during ferrihydrite transformation is poorly understood. In this study, we investigated the effect of HA on (1) Sb partitioning between solid, colloidal and dissolved phases and (2) Sb redox speciation during the Fe(II)-induced transformation of Sb(V)-bearing ferrihydrite at pH 6.0 and 8.0 and Fe(II) concentrations of 0, 1 and 10 mM. The results show that, at pH 8.0 and in the presence of 10 mM Fe(II), ferrihydrite was replaced by goethite, lepidocrocite and magnetite across a wide range of HA concentrations. At pH 6.0 in the 10 mM Fe(II) treatments, ferrihydrite transformed to mainly lepidocrocite and goethite in both HA-free and low HA treatments. In contrast, high HA concentrations retarded the rate and extent of ferrihydrite transformation at both pH 6.0 and 8.0 in the 1 mM Fe(II) treatments. Antimony K-edge XANES spectroscopy revealed up to 60% reduction of solid-phase Sb(V) to Sb(III), which corresponded with an increase in the PO₄^3--extractable fraction of solid-phase Sb in HA- and Fe(II)-rich conditions at pH 8.0. In contrast to the observations at pH 8.0, minimal reduction of solid-phase Sb(V) was observed in the pH 6.0 treatments with the highest HA content, yet some reduction of Sb(V) occurred (~30-40%) at intermediate HA concentrations. Humic acid-rich conditions were also found to promote the formation of substantial amounts of colloidal Sb in the <0.45 μm to 3 kDa size range at both pH 6.0 and 8.0. Our results demonstrate that HA can exert an important control on the partitioning, mobility and speciation of Sb during Fe(II)-induced transformation of ferrihydrite in sub-surface environments.

Sb(V) adsorption and desorption onto ferrihydrite: influence of pH and competing organic and inorganic anions

In this study, we investigated the Sb(V) adsorption on ferrihydrite (Fh) at different pH values, in the presence and absence of common competing anions in soil such as phosphate (P(V)) and arsenate (As(V)). Batch adsorption experiments, carried out at pH 4.5, 6.0, and 7.0, showed a greater affinity of Fh towards P(V) and As(V) with respect to Sb(V), especially at higher pH values, while the opposite was true at acidic pH. The capacity of Fh to accumulate greater amounts of phosphate and arsenate in the 6.0-7.0 pH range was mainly linked to the different acid properties of P(V), As(V), and Sb(V) oxyanions. The Sb(V) adsorption on Fh was highly pH-dependent and followed the following order: pH 4.5 (0.957 mmol·g^-1 Fh) > pH 6.0 (0.701 mmol·g^-1 Fh) > pH 7.0 (0.583 mmol·g^-1 Fh). Desorption of antimonate from Sb(V)-saturated Fh, treated with citric and malic acid solutions, was ~equal to 55, 68, and 76% of that sorbed at pH 4.5, 6.0, and 7.0, respectively, while phosphate, arsenate, and sulfate were able to release significantly lower Sb(V) amounts. The FT-IR spectra revealed substantial absorbance shifts related to the surface hydroxyl groups of Fh, which were attributed to the formation of Fe-O-Sb(V) bonds and supported the formation of inner-sphere bonding between Sb(V) and Fh.

Antimony speciation in the environment: Recent advances in understanding the biogeochemical processes and ecological effects

Antimony (Sb) is a toxic metalloid, and its pollution has become a global environmental problem as a result of its extensive use and corresponding Sb-mining activities. The toxicity and mobility of Sb strongly depend on its chemical speciation. In this review, we summarize the current knowledge on the biogeochemical processes (including emission, distribution, speciation, redox, metabolism and toxicity) that trigger the mobilization and transformation of Sb from pollution sources to the surrounding environment. Natural phenomena such as weathering, biological activity and volcanic activity, together with anthropogenic inputs, are responsible for the emission of Sb into the environment. Sb emitted in the environment can adsorb and undergo redox reactions on organic or inorganic environmental media, thus changing its existing form and exerting toxic effects on the ecosystem. This review is based on a careful and systematic collection of the latest papers during 2010-2017 and our research results, and it illustrates the fate and ecological effects of Sb in the environment.

Removal of antimonate (Sb(V)) and antimonite (Sb(III)) from aqueous solutions by coagulation-flocculation-sedimentation (CFS): Dependence on influencing factors and insights into removal mechanisms

This study investigates the effects of different influence factors on the removal of inorganic Sb species using coagulation-flocculation-sedimentation (CFS) and establishes the mechanism of the process. Thus, the influence of pH, initial Sb concentrations, coagulant dosages and competitive matters on Sb(V) and Sb(III) removal via CFS with polymeric ferric sulfate (PFS) was investigated systemically. Competition experiments and characterization methods, including X-ray diffraction (XRD), energy dispersive spectrometry (EDS), and X-ray photoelectron spectroscopy (XPS), were performed to determine the mechanisms of the process. The main conclusions included: (i) Optimum Sb removal was observed at a pH range of 4-6 and dosages of 4 × 10^-4 mol/L and 8 × 10^-5 mol/L for Sb(V) and Sb(III), respectively. Additionally, both Sb(V) and Sb(III) removal could be inhibited by the presence of phosphate and humic acid (HA). (ii) A higher priority was observed for the removal of Sb(III) over Sb(V). (iii) After excluding precipitation/inclusion/occlusion, coprecipitation involving chemical bonding played a significant role in both Sb(V) and Sb(III) removal, and electrostatic force served another significant role in Sb(V) removal. The Sb(V) and Sb(III) contamination in real contaminated waters was successfully removed using PFS via CFS process. The results of this study provide insights into the removal mechanisms of inorganic Sb species via CFS.

Influence of pH and Contaminant Redox Form on the Competitive Removal of Arsenic and Antimony from Aqueous Media by Coagulation

In most countries, arsenic (As) and antimony (Sb) are regulated pollutants, due to their significant impacts on the environment and human health. Iron-based (Fe) coagulants play a fundamental role in the removal of both elements from aqueous media. This study aims to investigate the competitive removal of As and Sb in relation to Fe solubility. Coagulation experiments were conducted in synthetic water under various pH and contaminant loading, using ferric chloride (FC) as a coagulant. In the single system, the pentavalent species significantly reduced the Fe solubility and thereby enhanced the mobility of As and Sb under these environmental conditions. The coexistence of pentavalent and trivalent species in the binary system considerably decreases the Fe solubility at acidic conditions while enhancing the dissolution under alkaline conditions, thus affecting the overall removal of both species. The presence of four redox species in the quaternary system decreases the Fe solubility remarkably over a wide pH range, with better Sb removal, as compared to As under similar conditions. The adsorption study of the single system showed a decrease in As(V) adsorption capacity at higher concentration, while in the binary system, the Sb(III) showed strong adsorption potential, compared to other species. In the quaternary system, the presence of all four redox species has a synergistic effect on total Sb adsorption, in comparison to the total As. Furthermore, the results of Fourier transform infrared (FT-IR) analysis of FC composite contaminant flocs confirm that the combined effect of charge neutralization and inner sphere complexation might be a possible removal mechanism. These findings may facilitate the fate, transport and comparative removal of redox species in the heterogeneous aquatic environment.

XANES-Based Determination of Redox Potentials Imposed by Steel Corrosion Products in Cement-Based Media

The redox potential (Eh) in a cementitious nuclear waste repository is critical to the retardation behavior of redox-sensitive radionuclides (RNs), and largely controlled by embedded steel corrosion but hard to be determined experimentally. Here, we propose an innovative Eh determination method based on chemical/spectroscopic measurements. Oxidized nuclides (U^VI, Se^IV, Mo^VI, and Sb^V) were employed as species probes to detect the Eh values imposed by steel (Fe⁰) and steel corrosion products (magnetite/hematite, and magnetite/goethite couples) in cement pore water. Nuclides showed good sorption affinity, especially toward Fe⁰, in decreasing K_d order for U > Sb > Se > Mo under both N₂ and H₂ atmospheres. The reduced nuclide species were identified as UO₂, U₄O₉, FeSe, FeSe₂, Se⁰, Sb⁰, and Sb₂O₃, but no redox transformation occurred for Mo. Eh values were obtained by using the Nernst equation. Remarkably, their values fell in a small range centered around -456 mV at pH ∼ 13.5 for both Fe⁰ and Fe-oxyhydroxides couples. This Eh value appears to be controlled by the nanocrystalline Fe(OH)₂/Fe(OH)₃ or (Fe_{1- x},Ca _x)(OH)₂/Fe(OH)₃ couple, whose presence was confirmed by pair distribution function analyses. This approach could pave the way for describing the Eh gradient in reinforced concrete where traditional Eh measurements are not feasible.

Mechanisms of Se(IV) Co-precipitation with Ferrihydrite at Acidic and Alkaline Conditions and Its Behavior during Aging

Understanding the form of Se(IV) co-precipitated with ferrihydrite and its subsequent behavior during phase transformation is critical to predicting its long-term fate in a range of natural and engineered settings. In this work, Se(IV)-ferrihydrite co-precipitates formed at different pH were characterized with chemical extraction, transmission electron microscopy (TEM), and X-ray absorption spectroscopy (XAS) to determine how Se(IV) is associated with ferrihydrite. Results show that despite efficient removal, the mode and stability of Se(IV) retention in the co-precipitates varied with pH. At pH 5, Se(IV) was removed dominantly as a ferric selenite-like phase intimately associated with ferrihydrite, while at pH 10, it was mostly present as a surface species on ferrihydrite. Similarly, the behavior of Se(IV) and the extent of its retention during phase transformation varied with pH. At pH 5, Se(IV) remained completely associated with the solid phase despite the phase change, whereas it was partially released back into solution at pH 10. Regardless of this difference in behavior, TEM and XAS results show that Se(IV) was retained within the crystalline post-aging products and possibly occluded in nanopore and defect structures. These results demonstrate a potential long-term immobilization pathway for Se(IV) even after phase transformation. This work presents one of the first direct insights on Se(IV) co-precipitation and its behavior in response to iron phase transformations.