Evaluation of a carbonic anhydrase mimic for industrial carbon capture

Carbonic anhydrase encapsulation using bamboo cellulose scaffolds for efficient CO2 capture and conversion

Utilizing carbonic anhydrase (CA) to catalyze CO2 hydration offers a sustainable and potent approach for carbon capture and utilization. To enhance CA's reusability and stability for successful industrial applications, enzyme immobilization is essential. In this study, delignified bamboo cellulose served as a renewable porous scaffold for immobilizing CA through oxidation-induced cellulose aldehydation followed by Schiff base linkage. The catalytic performance of the resulting immobilized CA was evaluated using both p-NPA hydrolysis and CO2 hydration models. Compared to free CA, immobilization onto the bamboo scaffold increased CA's optimal temperature and pH to approximately 45 °C and 9.0, respectively. Post-immobilization, CA activity demonstrated effective retention (>60 %), with larger scaffold sizes (i.e., 8 mm diameter and 5 mm height) positively impacting this aspect, even surpassing the activity of free CA. Furthermore, immobilized CA exhibited sustained reusability and high stability under thermal treatment and pH fluctuation, retaining >80 % activity even after 5 catalytic cycles. When introduced to microalgae culture, the immobilized CA improved biomass production by ∼16 %, accompanied by enhanced synthesis of essential biomolecules in microalgae. Collectively, the facile and green construction of immobilized CA onto bamboo cellulose block demonstrates great potential for the development of various CA-catalyzed CO2 conversion and utilization technologies.

Evaluation of polyanionic cyclodextrins as high affinity binding scaffolds for fentanyl

Cyclodextrins (CDs) have been previously shown to display modest equilibrium binding affinities (K_a ~ 100-200 M^-1) for the synthetic opioid analgesic fentanyl. In this work, we describe the synthesis of new CDs possessing extended thioalkylcarboxyl or thioalkylhydroxyl moieties and assess their binding affinity towards fentanyl hydrochloride. The optimal CD studied displays a remarkable affinity for the opioid of K_a = 66,500 M^-1, the largest value reported for such an inclusion complex to date. One dimensional ¹H Nuclear Magnetic Resonance (NMR) as well as Rotational Frame Overhauser Spectroscopy (2D-ROESY) experiments supported by molecular dynamics (MD) simulations suggest an unexpected binding behavior, with fentanyl able to bind the CD interior in one of two distinct orientations. Binding energies derived from the MD simulations work correlate strongly with NMR-derived affinities highlighting its utility as a predictive tool for CD candidate optimization. The performance of these host molecules portends their utility as platforms for medical countermeasures for opioid exposure, as biosensors, and in other forensic science applications.

Carbonic anhydrase to boost CO2 sequestration: Improving carbon capture utilization and storage (CCUS)

CO₂ Capture Utilization and Storage (CCUS) is a fundamental strategy to mitigate climate change, and carbon sequestration, through absorption, can be one of the solutions to achieving this goal. In nature, carbonic anhydrase (CA) catalyzes the CO₂ hydration to bicarbonates. Targeting the development of novel biotechnological routes which can compete with traditional CO₂ absorption methods, CA utilization has presented a potential to expand as a promising catalyst for CCUS applications. Driven by this feature, the search for novel CAs as biocatalysts and the utilization of enzyme improvement techniques, such as protein engineering and immobilization methods, has resulted in suitable variants able to catalyze CO₂ absorption at relevant industrial conditions. Limitations related to enzyme recovery and recyclability are still a concern in the field, affecting cost efficiency. Under different absorption approaches, CA enhances both kinetics and CO₂ absorption yields, besides reduced energy consumption. However, efforts directed to process optimization and demonstrative plants are still limited. A recent topic with great potential for development is the CA utilization in accelerated weathering, where industrial residues could be re-purposed towards becoming carbon sequestrating agents. Furthermore, research of new solvents has identified potential candidates for integration with CA in CO₂ capture, and through techno-economic assessments, CA can be a path to increase the competitiveness of alternative CO₂ absorption systems, offering lower environmental costs. This review provides a favorable scenario combining the enzyme and CO₂ capture, with possibilities in reaching an industrial-like stage in the future.

Amino Acid-Mediated Synthesis of the ZIF-8 Nanozyme That Reproduces Both the Zinc-Coordinated Active Center and Hydrophobic Pocket of Natural Carbonic Anhydrase

The zeolitic imidazolate framework-8 (ZIF-8) nanozyme has been synthesized using hydrophobic amino acid (AA) to regulate crystal growth. The as-synthesized ZIF-8 reproduces both the structural and functional properties of natural carbonic anhydrase (CA). Structurally, Zn²⁺/2-methylimidazole coordinated units mimic very well the active center of CA while the hydrophobic microdomains of the adsorbed AA simulate the CA hydrophobic pocket. Functionally, the nanozymes show excellent CA-like esterase activity by giving specific enzyme activity of 0.22 U mg^-1 at 25 °C in the case of Val-ZIF-8. More strikingly, such nanozymes are superior to natural CA by having excellent hydrothermal stability, which can give highly enhanced esterase activity with increasing temperature. The specific enzyme activity of Val-ZIF-8 at 80 °C is about 25 times higher than that at 25 °C. In addition, AA-ZIF-8 also shows an excellent catalytic efficiency toward carbon dioxide (CO₂) hydration. This study puts forward the important role of hydrophobic microdomains in biomimetic nanozymes for the first time and develops a facile and mild method for the synthesis of nanozymes with controlled morphology and size to achieve excellent catalytic efficiency.

Simultaneous removal of CO2, NOx and SOx using single stage absorption column

Capturing flue gases often require multiple stages of scrubbing, increasing the capital and operating costs. So far, no attempt has been made to study the absorption characteristics of all the three gases (NO, SO₂ and CO₂) in a single stage absorption unit at alkaline pH conditions. We have attempted to capture all the three gases with a single wet scrubbing column. The absorption of all three gases with sodium carbonate solution promoted with oxidizers was investigated in a tall absorption column. The absorbance was found to be 100% for CO₂, 30% for NO and 95% for SO₂ respectively. The capture efficiency of sodium carbonate solution was increased by 40% for CO₂ loading, with the addition of oxidizer. Absorption kinetics and reaction pathways of all the three gases were discussed individually in detail.

Protein-caged zinc porphyrin as a carbonic anhydrase mimic for carbon dioxide capture

Zinc tetraphenylporphyrin (Zn-TPP) solubilized by GroEL protein cage was prepared as a supramolecular mimic of carbonic anhydrase (CA) for CO2 capture. It is shown that the soluble Zn-TPP-GroEL complex can be formed easily by detergent dialysis. The Zn-TPP/GroEL binding ratio was found to increase with their dialysis ratio until reaching the maximum of about 30 porphyrins per protein cage. Moreover, the complex showed hydrase activity that catalyzes the CO2 hydration in HCO3- and H+. It is further seen that the catalytic activity of Zn-TPP-GroEL was about one-half of that of a bovine CA at 25 °C. On the other hand, as the temperature was increased to 60 °C close to an industrial CO2 absorption temperature, the natural enzyme lost function while Zn-TPP-GroEL exhibited better catalytic performance indicative of a higher thermal stability. Finally, we demonstrate that the GroEL-solubilized Zn-TPP is able to accelerate the precipitation of CO2 in the form of CaCO3 and has better long-term performance than the bovine CA. Thus a new type of nano-caged system mimicking natural CAs for potential applications in carbon capture has been established.

Kinetic Study of CO2 Hydration by Small-Molecule Catalysts with A Second Coordination Sphere that Mimic the Effect of the Thr-199 Residue of Carbonic Anhydrase

Zinc complexes were synthesized as catalysts that mimic the ability of carbonic anhydrase (CA) for the CO2 hydration reaction (H2O + CO2 → H+ + HCO3-). For these complexes, a tris(2-pyridylmethyl)amine (TPA) ligand mimicking only the active site, and a 6-((bis(pyridin-2-ylmethyl)amino)methyl)pyridin-2-ol (TPA-OH) ligand mimicking the hydrogen-bonding network of the secondary coordination sphere of CA were used. Potentiometric pH titration was used to determine the deprotonation ability of the Zn complexes, and their pKa values were found to be 8.0 and 6.8, respectively. Stopped-flow spectrophotometry was used to confirm the CO2 hydration rate. The rate constants were measured to be 648.4 and 730.6 M-1s-1, respectively. The low pKa value was attributed to the hydrogen-bonding network of the secondary coordination sphere of the catalyst that mimics the behavior of CA, and this was found to increase the CO2 hydration rate of the catalyst.

Kinetic study of catalytic CO2 hydration by metal-substituted biomimetic carbonic anhydrase model complexes

The rapid rise of the CO₂ level in the atmosphere has spurred the development of CO₂ capture methods such as the use of biomimetic complexes that mimic carbonic anhydrase. In this study, model complexes with tris(2-pyridylmethyl)amine (TPA) were synthesized using various transition metals (Zn²⁺, Cu²⁺ and Ni²⁺) to control the intrinsic proton-donating ability. The pK_a of the water coordinated to the metal, which indicates its proton-donating ability, was determined by potentiometric pH titration and found to increase in the order [(TPA)Cu(OH₂)]²⁺ < [(TPA)Ni(OH₂)]²⁺ < [(TPA)Zn(OH₂)]²⁺. The effect of pK_a on the CO₂ hydration rate was investigated by stopped-flow spectrophotometry. Because the water ligand in [(TPA)Zn(OH₂)]²⁺ had the highest pK_a, it would be more difficult to deprotonate it than those coordinated to Cu²⁺ and Ni²⁺. It was, therefore, expected that the complex would have the slowest rate for the reaction of the deprotonated water with CO₂ to form bicarbonate. However, it was confirmed that [(TPA)Zn(OH₂)]²⁺ had the fastest CO₂ hydration rate because the substitution of bicarbonate with water (bicarbonate release) occurred easily.

Evaluating the Performance of Micro-Encapsulated CO2 Sorbents during CO2 Absorption and Regeneration Cycling

We encapsulated six solvents with novel physical and chemical properties for CO₂ sorption within gas-permeable polymer shells, creating Micro-Encapsulated CO₂ Sorbents (MECS), to improve the CO₂ absorption kinetics and handling of the solvents for postcombustion CO₂ capture from flue gas. The solvents were sodium carbonate (Na₂CO₃) solution, uncatalyzed and with two different promoters, two ionic liquid (IL) solvents, and one CO₂-binding organic liquid (CO₂BOL). We subjected each of the six MECS to multiple CO₂ absorption and regeneration cycles and measured the working CO₂ absorption capacity as a function of time to identify promising candidate MECS for large-scale carbon capture. We discovered that the uncatalyzed Na₂CO₃ and Na₂CO₃-sarcosine MECS had lower CO₂ absorption rates relative to Na₂CO₃-cyclen MECS over 30 min of absorption, while the CO₂BOL Koechanol appeared to permeate through the capsule shell and is thus unsuitable. We rigorously tested the most promising three MECS (Na₂CO₃-cyclen, IL NDIL0309, and IL NDIL0230) by subjecting each of them to a series of 10 absorption/stripping cycles. The CO₂ absorption curves were highly reproducible for these three MECS across 10 cycles, demonstrating successful absorption/regeneration without degradation. As the CO₂ absorption rate is dynamic in time and the CO₂ loading per mass varies among the three most promising MECS, the process design parameters will ultimately dictate the selection of MECS solvent.

Bio-electrochemical system (BES) as an innovative approach for sustainable waste management in petroleum industry

Petroleum industry is one of the largest and fast growing industries due to the ever increasing global energy demands. Petroleum refinery produces huge quantities of wastes like oily sludge, wastewater, volatile organic compounds, waste catalyst, heavy metals, etc., because of its high capacity and continuous operation of many units. Major challenge to this industry is to manage the huge quantities of waste generated from different processes due to the complexity of waste as well as changing stringent environmental regulations. To decrease the energy loss for treatment and also to conserve the energy stored in the chemical bonds of these waste organics, bio-electrochemical system (BES) may be an efficient tool that reduce the economics of waste disposal by transforming the waste into energy pool. The present review discusses about the feasibility of using BES as a potential option for harnessing energy from different waste generated from petroleum refineries.

Kinetics of CO2 diffusion in human carbonic anhydrase: a study using molecular dynamics simulations and the Markov-state model

Molecular dynamics (MD) simulations, in combination with the Markov-state model (MSM), were applied to probe CO₂ diffusion from an aqueous solution into the active site of human carbonic anhydrase II (hCA-II), an enzyme useful for enhanced CO₂ capture and utilization. The diffusion process in the hydrophobic pocket of hCA-II was illustrated in terms of a two-dimensional free-energy landscape. We found that CO₂ diffusion in hCA-II is a rate-limiting step in the CO₂ diffusion-binding-reaction process. The equilibrium distribution of CO₂ shows its preferential accumulation within a hydrophobic domain in the protein core region. An analysis of the committors and reactive fluxes indicates that the main pathway for CO₂ diffusion into the active site of hCA-II is through a binding pocket where residue Gln¹³⁶ contributes to the maximal flux. The simulation results offer a new perspective on the CO₂ hydration kinetics and useful insights toward the development of novel biochemical processes for more efficient CO₂ sequestration and utilization.

Production and covalent immobilisation of the recombinant bacterial carbonic anhydrase (SspCA) onto magnetic nanoparticles

Carbonic anhydrases (CAs; EC 4.2.1.1) are metalloenzymes with a pivotal potential role in the biomimetic CO₂ capture process (CCP) because these biocatalysts catalyse the simple but physiologically crucial reaction of carbon dioxide hydration to bicarbonate and protons in all life kingdoms. The CAs are among the fastest known enzymes, with k_cat values of up to 10⁶ s^-1 for some members of the superfamily, providing thus advantages when compared with other CCP methods, as they are specific for CO₂. Thermostable CAs might be used in CCP technology because of their ability to perform catalysis in operatively hard conditions, typical of the industrial processes. Moreover, the improvement of the enzyme stability and its reuse are important for lowering the costs. These aspects can be overcome by immobilising the enzyme on a specific support. We report in this article that the recombinant thermostable SspCA (α-CA) from the thermophilic bacterium Sulfurihydrogenibium yellowstonense can been heterologously produced by a high-density fermentation of Escherichia coli cultures, and covalently immobilised onto the surface of magnetic Fe₃O₄ nanoparticles (MNP) via carbodiimide activation reactions. Our results demonstrate that using a benchtop bioprocess station and strategies for optimising the bacterial growth, it is possible to produce at low cost a large amount SspCA. Furthermore, the enzyme stability and storage greatly increased through the immobilisation, as SspCA bound to MNP could be recovered from the reaction mixture by simply using a magnet or an electromagnetic field, due to the strong ferromagnetic properties of Fe₃O₄.

Microbial Carbonic Anhydrases in Biomimetic Carbon Sequestration for Mitigating Global Warming: Prospects and Perspectives

All the leading cities in the world are slowly becoming inhospitable for human life with global warming playing havoc with the living conditions. Biomineralization of carbon dioxide using carbonic anhydrase (CA) is one of the most economical methods for mitigating global warming. The burning of fossil fuels results in the emission of large quantities of flue gas. The temperature of flue gas is quite high. Alkaline conditions are necessary for CaCO3 precipitation in the mineralization process. In order to use CAs for biomimetic carbon sequestration, thermo-alkali-stable CAs are, therefore, essential. CAs must be stable in the presence of various flue gas contaminants too. The extreme environments on earth harbor a variety of polyextremophilic microbes that are rich sources of thermo-alkali-stable CAs. CAs are the fastest among the known enzymes, which are of six basic types with no apparent sequence homology, thus represent an elegant example of convergent evolution. The current review focuses on the utility of thermo-alkali-stable CAs in biomineralization based strategies. A variety of roles that CAs play in various living organisms, the use of CA inhibitors as drug targets and strategies for overproduction of CAs to meet the demand are also briefly discussed.

Accelerating Mineral Carbonation Using Carbonic Anhydrase

Carbonic anhydrase (CA) enzymes have gained considerable attention for their potential use in carbon dioxide (CO2) capture technologies because they are able to catalyze rapidly the interconversion of aqueous CO2 and bicarbonate. However, there are challenges for widespread implementation including the need to develop mineralization process routes for permanent carbon storage. Mineral carbonation of highly reactive feedstocks may be limited by the supply rate of CO2. This rate limitation can be directly addressed by incorporating enzyme-catalyzed CO2 hydration. This study examined the effects of bovine carbonic anhydrase (BCA) and CO2-rich gas streams on the carbonation rate of brucite [Mg(OH)2], a highly reactive mineral. Alkaline brucite slurries were amended with BCA and supplied with 10% CO2 gas while aqueous chemistry and solids were monitored throughout the experiments (hours to days). In comparison to controls, brucite carbonation using BCA was accelerated by up to 240%. Nesquehonite [MgCO3·3H2O] precipitation limited the accumulation of hydrated CO2 species, apparently preventing BCA from catalyzing the dehydration reaction. Geochemical models reproduce observed reaction progress in all experiments, revealing a linear correlation between CO2 uptake and carbonation rate. Data demonstrates that carbonation in BCA-amended reactors remained limited by CO2 supply, implying further acceleration is possible.

The salt-based catalytic enhancement of CO2 absorption by a tertiary amine medium

An improved CO₂ sequestration method is proposed that uses new catalysts, specifically a series of tertiary amine nitrate salts, in an aqueous tertiary amine medium.

Carbon Dioxide Sequestration by Using a Model Carbonic Anhydrase Complex in Tertiary Amine Medium

Globally, the elevation of carbon dioxide (CO2 ) levels due to the anthropogenic effect poses a serious threat to the ecosystem. Hence, it is important to control and/or mitigate the level of CO2 in the atmosphere, which necessitates novel tools. Herein, it is proposed to improve CO2 sequestration by using model complexes based on the enzyme carbonic anhydrase (CA) in aqueous tertiary amine medium. The effect of substituents on the model CA model complexes on CO2 absorption and desorption was determined by using a stopped-flow spectrophotometer to follow pH changes through coupling to pH indicator and a continuous stirred-tank reactor (CSTR). The CO2 hydration rate constants were determined under basic conditions and compound 6, which contained a hydrophilic group, showed the highest absorption or hydration levels of CO2 (2.860×10(3)  L mol(-1)  s(-1) ). In addition, CSTR results for the absorption and desorption of CO2 suggest that simple model CA complexes could be used in post-combustion processing.

Improving carbon capture from power plant emissions with zinc- and cobalt-based catalysts

A carbonic anhydrase mimic converting CO₂ to carbonic acid, deprotonated under highly basic conditions, and being converted to a carbamate upon reaction with monoethanolamine, a solvent reported for carbon capture reactions.