Aqueous Cu(II)-organic complexation studied in situ using soft X-ray and vibrational spectroscopies

Simultaneous decomplexation of Pb-EDTA and elimination of free Pb ions by MoS2/H2O2: Mechanisms and applications

The critical challenge of effectively removing Pb-EDTA complexes and Pb(II) ions from wastewater is pivotal for environmental remediation. This research introduces a cutting-edge bulk-MoS2/H2O2 system designed for the simultaneous decomplexation of Pb-EDTA complexes and extraction of free Pb(II) ions, streamlining the process by eliminating the need for subsequent treatment stages. The system exhibits outstanding efficiency, achieving 98.1% decomplexation of Pb-EDTA and 98.6% removal of Pb. Its effectiveness is primarily due to the generation of reactive oxygen species, notably •OH and O2•- radicals, facilitated by bulk-MoS2 and H2O2. Key operational parameters such as reagent dosages, Pb(II): EDTA molar ratios, solution pH, and the presence of coexisting ions were meticulously evaluated to determine their impact on the system's performance. Through a suite of analytical techniques, the study confirmed the disruption of Pb-O and Pb-N bonds, further elucidating the decomplexation process. It also underscored the synergistic role of bulk-MoS2's adsorption properties and the formation of PbMoO4-like precipitates in enhancing Pb elimination. Demonstrating the bulk-MoS2/H2O2 system as a robust, one-step solution that meets stringent Pb emission standards, this study provides in-depth insights into the removal mechanisms of Pb-EDTA, affirming its potential for broader application in wastewater treatment practices.

Effect of pyrolysis temperature on the binding characteristics of DOM derived from livestock manure biochar with Cu(II)

Biochar-derived dissolved organic matter (BDOM) has the potential to influence the environmental application of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from livestock manure biochar at different pyrolysis temperatures with Cu(II) were investigated based on a multi-analytical approach. The results showed that the DOC concentration, aromatics, and humification degree of BDOM were higher in the process of low pyrolysis of biochar. The pyrolysis temperature changed the composition of BDOM functional groups, which affected the binding mechanism of BDOM-Cu(II). Briefly, humic-like and protein-like substances dominated BDOM-Cu(II) binding at low and high pyrolysis temperatures, respectively. The higher binding capacity for Cu(II) was exhibited by BDOM derived from the lower pyrolysis temperature, due to the carboxyl as the main binding site in humic acid had high content and binding ability at low-temperature. The amide in proteins only participated in the BDOM-Cu(II) binding at high pyrolysis temperature, and polysaccharides also played an important role in the binding process. Moreover, the biochar underwent the secondary reaction at certain high temperatures, which led to condensation reaction of the aromatic structure and the conversion of large molecules into small molecules, affecting the BDOM-Cu(II) binding sites.

Distance effect of single atoms on stability of cobalt oxide catalysts for acidic oxygen evolution

Developing efficient and economical electrocatalysts for acidic oxygen evolution reaction (OER) is essential for proton exchange membrane water electrolyzers (PEMWE). Cobalt oxides are considered promising non-precious OER catalysts due to their high activities. However, the severe dissolution of Co atoms in acid media leads to the collapse of crystal structure, which impedes their application in PEMWE. Here, we report that introducing acid-resistant Ir single atoms into the lattice of spinel cobalt oxides can significantly suppress the Co dissolution and keep them highly stable during the acidic OER process. Combining theoretical and experimental studies, we reveal that the stabilizing effect induced by Ir heteroatoms exhibits a strong dependence on the distance of adjacent Ir single atoms, where the OER stability of cobalt oxides continuously improves with decreasing the distance. When the distance reduces to about 0.6 nm, the spinel cobalt oxides present no obvious degradation over a 60-h stability test for acidic OER, suggesting potential for practical applications.

Characterization of copper binding to biochar-derived dissolved organic matter: Effects of pyrolysis temperature and natural wetland plants

Characterization of the biochar-derived dissolved organic matter (BDOM) is essential to understanding the environmental efficacy of biochar and the behavior of heavy metals. In this study, the binding properties of BDOM derived from different pyrolysis temperatures, wetland plants, and plant organs with Cu was investigated based on a multi-analytical approach. In general, the pyrolysis temperature exhibited a more significant impact on both the spectral characteristics of BDOM and Cu binding behavior than those of the feedstocks. With the pyrolysis temperature increased, the dissolved organic carbon, aromaticity, and fluorescence substance of BDOM decreased and the structure became more condensed. Humic-and tryptophan-like substance was more susceptible to the addition of Cu for BDOM pyrolyzed at 300 ℃ and 500 ℃, respectively. In addition, the more tyrosine-like substance is involved in Cu binding at higher pyrolysis temperature (500 ℃). However, the fluvic-like substance occurred preferentially with Cu than the other fluorophores. Moreover, the higher binding capacity for Cu was exhibited by the humic-like substance and by BDOM derived from the higher pyrolysis temperature and the lower elevation plants with the corresponding average stability constants (log K_M) of 5.58, 5.36, and 5.16.

Molecular insights into the effects of pyrolysis temperature on composition and copper binding properties of biochar-derived dissolved organic matter

Biochar-derived dissolved organic matter (BDOM), which has a substantial impact on the environmental behavior of heavy metals, is critical for understanding the environmental efficacy of biochar. Here, we used a suite of advanced spectroscopic and mass spectroscopic methods to investigate the relationship among the pyrolysis temperature of biochar, composition of BDOM, and interactions of BDOM with Cu. The binding affinity of BDOM and Cu showed incredibly increase, with the increasing pyrolysis temperature (300-500 °C) which promoted the release of condensed aromatic compounds and oxygen-containing functional groups from biochar into dissolved phase. A notable difference in the sequences binding with Cu was occurred during the changing pyrolysis temperature. The amide only involved in the binding process between Cu and BDOM at low-temperature (300 and 400 °C), whereas phenolic only associated with the such binding process at high-temperature (500 °C). Apart from this, the carboxyl and polysaccharides took part in the binding process of Cu with BDOM, no matter how higher the temperature is. A further analysis by X-ray absorption spectroscopy revealed that bidentate carboxylic-Cu complexes appear to be the predominant binding pattern for Cu to BDOM. Our results might contribute to provide novel information for the environment applications of biochar.

Controlled Synthesis of EDTA-Modified Porous Hollow Copper Microspheres for High-Efficiency Conversion of CO2 to Multicarbon Products

Electrochemical reduction of CO₂ into value-added products is an effective approach to relieve environmental and energetic issues. Herein, EDTA anion-modified porous hollow copper microspheres (H-Cu MPs) were constructed by EDTA-2Na-assisted electrodeposition. The faradic efficiency (FE) of ethylene doubled from 23.3% to 50.1% at -0.82 V vs RHE in nearly neutral 0.1 M KHCO₃ solution, one of the highest values among copper-based electrodeposited catalysts. Apart from the favorable influence from morphology regulated by EDTA-2Na, theoretical calculations revealed that the adsorbed EDTA anions were able to create a local charged copper surface to stabilize the transition state and dimer and to assist in the stabilization by interacting with OCCO adsorbate synergistically, which contributed to the outstanding catalytic performance together.

Instrumentation for in situ flow electrochemical Scanning Transmission X-ray Microscopy (STXM)

We report the design and performance of a 3-electrode device for real time in situ scanning transmission X-ray microscopy studies of electrochemical processes under both static (sealed, non-flow) conditions and with a continuous flow of electrolytes. The device was made using a combination of silicon microfabrication and 3D printing technologies. The performance is illustrated by results of a study of copper deposition and stripping at a gold working electrode. X-ray absorption spectromicroscopy at the Cu 2p edge was used to follow the evolution as a function of potential and time of the spatial distributions of Cu(0) and Cu(i) species electro-deposited from an aqueous solution of copper sulphate. The results are interpreted in terms of competing mechanisms for the reduction of Cu(ii).