Scale-up study of a multiphase photocatalytic reactor--degradation of cyanide in water over TiO2

Photocatalytic Reactor as a Bridge to Link the Commercialization of Photocatalyst in Water and Air Purification

The development of clean and sustainable teleology is vital to treat the critical environmental pollutants. In the last decade, the use of photocatalytic reactors has been widely reported for organic pollutants degradation. From photocatalysis’s application in environmental remediation, the primary technical issue to scientists is always the efficiency. The enhanced photocatalytic efficiency is mainly depended on the materials improvement. However, the design of photoreactors lags behind the development of photocatalysts, which strongly limit the widespread use of photocatalysis technology in environmental remediation. The nanoparticles separation, mass transfer limitation, and photonic efficiency have always been problematic and restrict the high photocatalytic efficiency of photoreactors. To overcome these bottleneck problems, the most popular or newfangled designs of photoreactors employed in air and water treatment has been reviewed. The purpose of this review is to systematize designs and synthesis of innovative TiO2-based photoreactors and provides detailed survey and discussion on the enhanced mechanism of photocatalytic performance in different TiO2-based photoreactors. The most studied photoreactors are the following: packed bed reactor, film reactor and membrane reactor, which have some limitations and advantages. A comprehensive comparison between the different photocatalytic performance of TiO2-based photoreactors is presented. This work aims to summarize the progress of TiO2-based photoreactors and provides useful information for the further research and development of photocatalysis for water and air purification.

Photocatalytic Study of Cyanide Oxidation Using Titanium Dioxide (TiO2)-Activated Carbon Composites in a Continuous Flow Photo-Reactor

The photocatalytic oxidation of cyanide by titanium dioxide (TiO2) supported on activated carbon (AC) was evaluated in a continuous flow UV photo-reactor. The continuous photo-reactor was made of glass and covered with a wood box to isolate the fluid of external conditions. The TiO2-AC synthesized by the impregnation of TiO2 on granular AC composites was characterized by inductively coupled plasma optical emission spectrometry (ICP-OES), Scanning Electron Microscopy (SEM), and nitrogen adsorption-desorption isotherms. Photocatalytic and adsorption tests were conducted separately and simultaneously. The results showed that 97% of CN− was degraded within 24 h due to combined photocatalytic oxidation and adsorption. To estimate the contribution of only adsorption, two-stage tests were performed. First, 74% cyanide ion degradation was reached in 24 h under dark conditions. This result was attributed to CN− adsorption and oxidation due to the generation of H2O2 on the surface of AC. Then, 99% degradation of cyanide ion was obtained through photocatalysis during 24 h. These results showed that photocatalysis and the continuous photo-reactor’s design enhanced the photocatalytic cyanide oxidation performance compared to an agitated batch system. Therefore, the use of TiO2-AC composites in a continuous flow photo-reactor is a promising process for the photocatalytic degradation of cyanide in aqueous solutions.

Concurrent detection and treatment of cyanide-contaminated water using mechanosynthesized receptors

The development of receptors that can detect as well as treat cyanide ions in aqueous samples is indispensable for environmental protection. Herein, we present the bulk solvent-free and instant green synthesis of a series of turn-on fluorimetric probes that can specifically detect the deadly poison cyanide among various anions and metal ions in water. Selective recognition of cyanide by the mechanosynthesized compounds is even observable by the naked eyes, which remained unaffected in the presence of various challenging species. NMR spectroscopic investigation supports the chemodosimetric sensing of cyanide by the receptors. A remarkable 55-83 fold fluorescence enhancement by the probes enabled us to reach a limit of detection (LOD) in the range of 8-26 ppb, well below the permissible limit of cyanide in drinking water. Being minuscule soluble in water, cyanide treatment studies with the ionophores showed greater than 99% reduction in the free cyanide concentration after three consecutive cycles of operation. Furthermore, the compounds can be used as sensitive probes for the estimation of cyanide in human blood serum in physiological conditions. Overall, the results presented in this article will certainly find great use in the area of cyanide pollution with regard to simultaneous sensing and treatment of free cyanide, which is heretofore unprecedented.

Novel immobilized ternary photocatalytic polymer film based airlift reactor for efficient degradation of complex phthalocyanine dye wastewater

Reduced graphene oxide (rGO) as well as graphitic carbon nitride (g-C₃N₄) catalysts were synthesized and a physical admixture of rGO and g-C₃N₄ along with TiO₂ in the ratio of 1:1:1 by weight was immobilized in a polystyrene film using the facile solvent casting method. An internal loop airlift reactor with a working volume of 1.2 litres incorporating the prepared polymer-based photocatalytic film was designed and tested for the photocatalytic degradation of remazol turquoise blue dye synthetic wastewater. The reactor parameters affecting the photocatalytic activity such as airflow rate and D_i/D_o (ratio of draft tube diameter to outer tube diameter) were evaluated. The successful operation of the reactor obtained using the ternary immobilized catalyst mixture film gave 92.25% total organic carbon reduction and 94% decolourization within 140 min, compared to 91% decolourization by the slurry form within 40 min. Complete and quicker decolourization of the dye was also demonstrated under the influence of O₃ or H₂O₂. The immobilized catalyst was successfully reused four times. The ternary catalyst admixture employed in this work and the unique design of the photocatalytic reactor helps to increase the degradation rate of toxic textile effluents thus making it suitable for larger scales of treatment.

Self-assembled nanoparticle-stabilized photocatalytic reactors

The efficiency of nanostructured photocatalysts continues to improve at an impressive pace and is closing in on those needed for commercial applications; however, present-day reactor strategies used to deploy these nanostructures fail to achieve the sufficient areas (>1 m(2)) needed for solar application. Here we report the Self-assembled Nanoparticle-stabilized Photocatalytic Reactor (SNPR), a fully-scalable reactor strategy comprised only of nanoparticles adsorbed at the fluid-fluid interfaces of oil-in-water emulsions, water-in-oil emulsions, and CO2-in-water foams. We show that SNPRs naturally disperse over open water and need no physical substrate, requiring only photocatalysts and fluid. In environmental applications the SNPR provides more than double the reaction rate of a comparable single-phase reactor. In continuous mode, the SNPR achieves 100% photocatalyst retention and processes 96% of the stream over 20 hours; in contrast, the performance of a comparable aqueous suspension declines to zero over this interval, losing all photocatalyst to the outlet stream. We further characterize the photoactivity of individual photocatalytic droplets, with reactants in both the continuous and dispersed phases. These results demonstrate SNPRs as a robust and flexible reactor strategy and a route-to-scale for nanomaterials.

Enhanced photoelectrocatalytic decomposition of copper cyanide complexes and simultaneous recovery of copper with a Bi2MoO6 electrode under visible light by EDTA/K4P2O7

Simultaneous photoelectrocatalytic (PEC) oxidation of cyanides and recovery of copper in a PEC reactor with a Bi(2)MoO(6) photoanode was investigated at alkaline conditions under visible light irradiation. The surface variation of the Bi(2)MoO(6) photoanode and titanium cathode was characterized. The Cu mass distribution onto the anode, in the solution, and onto the cathode was fully investigated. In the individual PEC oxidation of copper cyanides, the formation of a black copper oxide on the anode occurred. By keeping the initial cyanide concentration at 0.01 mM, the effect of EDTA/K(4)P(2)O(7) was examined at different molar ratios of EDTA/K(4)P(2)O(7) to cyanide. It was indicated that the oxidation of cyanides increased and simultaneous copper electrodeposition with zero value onto the cathode was feasible at pH 11. Under the optimal conditions, the total cyanide concentration was lowered from 250 to 5.0 mg/L, and the Cu recovery efficiency deposited onto the cathode was higher than 90%. Cyanate was the only product. The role of the photogenerated hole in the oxidation of cyanide ions was confirmed.

Tailored synthesis of photoactive TiO ₂ nanofibers and Au/TiO ₂ nanofiber composites: structure and reactivity optimization for water treatment applications

Titanium dioxide (TiO2) nanofibers with tailored structure and composition were synthesized by electrospinning to optimize photocatalytic treatment efficiency. Nanofibers of controlled diameter (30-210 nm), crystal structure (anatase, rutile, mixed phases), and grain size (20-50 nm) were developed along with composite nanofibers with either surface-deposited or bulk-integrated Au nanoparticle cocatalysts. Their reactivity was then examined in batch suspensions toward model (phenol) and emerging (pharmaceuticals, personal care products) pollutants across various water qualities. Optimized TiO2 nanofibers meet or exceed the performance of traditional nanoparticulate photocatalysts (e.g., Aeroxide P25) with the greatest reactivity enhancements arising from (i) decreasing diameter (i.e., increasing surface area), (ii) mixed phase composition [74/26 (±0.5) % anatase/rutile], and (iii) small amounts (1.5 wt %) of surface-deposited, more so than bulk-integrated, Au nanoparticles. Surface Au deposition consistently enhanced photoactivity by 5- to 10-fold across our micropollutant suite independent of their solution concentration, behavior that we attribute to higher photocatalytic efficiency from improved charge separation. However, the practical value of Au/TiO2 nanofibers was limited by their greater degree of inhibition by solution-phase radical scavengers and higher rate of reactivity loss from surface fouling in nonidealized matrixes (e.g., partially treated surface water). Ultimately, unmodified TiO2 nanofibers appear most promising for use as reactive filtration materials because their performance was less influenced by water quality, although future efforts must increase the strength of TiO2 nanofiber mats to realize such applications.

Bio-templated synthesis of hierarchically ordered macro-mesoporous anatase titanium dioxide flakes with high photocatalytic activity

Hierarchically ordered macro-mesoporous anatase TiO₂ flakes were synthesized by using rose petals and P123 as dual templates with high photocatalytic activity.