Hygroscopic properties of internally mixed particles composed of NaCl and water-soluble organic acids

Carbon nanofiber coated ionic crystal architecture withconfinement effect for high-performance microwave absorption along with high-efficiency water harvesting from air

Water is considered an effective microwave absorber due to its high transmittance and frequency-dispersive dielectric constant, yet it is challenging to form it into a stable state as an absorber. Herein, we developed a water-containing microwave absorber using chemical vapor deposition (CVD), namely, the bifunctional carbon/NaCl multi-interfaces hybrid with excellent water harvesting and microwave absorption performance. Carbon/NaCl exhibits remarkable water harvesting abilities from air, exceeding 210 % of its weight in 12 h. The development of the hydrophilic/hydrophobic heterojunction interface is responsible for this outstanding performance. Additionally, the interfacial polarization provided by carbon/NaCl, along with the dipole polarization induced by the internally captured water and defects, enhances its microwave absorption. The carbon/NaCl hybrid achieved a minimum reflection loss (RLmin) of -69.62 dB at 17.1 GHz with a thickness of 2.13 mm, and a maximum effective absorption bandwidth (EABmax) of 6.74 GHz at a thickness of 2.5 mm. Compared with raw NaCl (RLmin of -24.5 dB, EABmax of 3.88 GHz), the RLmin and EABmax values of the absorber increased by approximately 2.85 and 1.74 times. These results highlight the potential for bifunctional carbon/NaCl hybrid in applications within extreme environments, presenting a promising avenue for further research and development.

Depletion of iodide in ageing aerosols and the role of humidity: A case study of mixed sodium iodide-malonic acid aerosol

Global sea to air iodine emissions, along with organic emissions and their oxidation products, have increased tremendously. This work presents a comprehensive analysis of the humidity mediated changes in ageing aerosols comprising iodide and water soluble dicarboxylic acid using aerosol micro-Raman spectroscopy. The studies in the model system, sodium iodide-malonic acid mixed aerosols, unveiled the depletion in iodide. Mechanistic insights gleaned through comparative studies conducted under inert (nitrogen) and oxidative (air) atmospheres reveal the iodide depletion occurs possibly via oxidation to molecular iodine. The reaction involves gaseous components, diffusion of which across the particles will be impacted by the physical state of the particles, such as viscosity, which in turn is intricately linked to ambient humidity levels. To this end, studies on the temporal evolution of the reaction at three distinct RHs covering 30-80% revealed the enhanced progression of the reaction with increasing humidity. Given that geographical locations serving as major sources for atmospheric iodine typically experience high humidity, these reactions could emerge as an additional process controlling iodine speciation in ageing aerosols.

Spectral Characteristics of Unsaturated and Supersaturated Inorganic Aerosols: Insights into Deliquescence Kinetics

The deliquescence phase transition of atmospheric aerosols is crucial for radiative forcing and atmospheric chemistry. However, the deliquescence kinetics of micrometer-sized aerosols, especially the formation and evolution of surface solution films, remain poorly understood. In this study, IR spectral characteristics were employed for the first time to quantify the solute concentration evolution in surface solution films. At a constant relative humidity (RH) of ∼65%, solution films on NaCl crystals exhibited a very low solute concentration (3.06 ± 0.18 mol/L), comparable to aqueous NaCl droplets above 90% RH. These films reached saturation at ∼74% RH, i.e., the deliquescence RH of NaCl, maintaining a nearly constant saturation level during deliquescence. In contrast, amorphous NaNO3 solids showed supersaturated solution films before deliquescence. Following deliquescence, the saturation level of solution phases increased due to faster solid dissolution rates than liquid water condensation. These findings address knowledge gaps in the complex nonequilibrium dissolution processes of crystalline or amorphous atmospheric aerosols.

Compositional evolution for mixed aerosols containing gluconic acid and typical nitrate and the effect of multiply factors on hygroscopicity

The aging process of atmospheric aerosols usually leads to a mixture of inorganic salts and organic compounds of anthropogenic origin. In organic compounds, polyhydroxy organic acids are important components, however, the study on composition and hygroscopic properties of the mixture containing inorganics and polyhydroxy organic acids is scanty. In this study, gluconic acid, the proxy of polyhydroxy organic acids, is mixed with the representative nitrate (Mg(NO3)2, Ca(NO3)2) to form aerosols. ATR-FTIR and optical microscopy are employed to study the component changes and hygroscopicity as a function of relative humidity. As relative humidity fluctuates, the FTIR-ATR spectra display that the internal mixed gluconic acid (CH2(CH)4(OH)5COOH) and nitrate can react to release acidic gases, forming relevant gluconate and further affecting the hygroscopicity. The specific presentation is particles cannot be recovered to their original size after the dehydration-hydration process and there will be some disparities in GF for mixed particles. For the gluconic acid-Ca(NO3)2/Mg(NO3)2 mixtures with molar ratios of 1:1, higher degree of reaction resulting in the production of large amounts of gluconate should be responsible to the lower hygroscopicity compared to ZSR model. For 1:2 gluconic acid-nitrate mixed systems (with higher nitrate content), the hygroscopicity of mixtures are higher than the ZSR prediction. A possible reason could be 'salt-promoting effect' on the organic fractions of the surplus inorganic salt in the mixture. These data can improve the chemical composition list evaluation, in turn hygroscopic properties and phase state of atmospheric aerosol, and then the climate effect.

Direct photodegradation of internally mixed sodium chloride and malonic acid single aerosols: Impact of the photoproducts on the hygroscopic properties of the particles

Sea-salt aerosols (SSA) are one of the key natural aerosols in our atmosphere, consisting predominantly of sodium chloride (NaCl). Throughout their atmospheric transport, these aerosols undergo complex internal mixing, giving rise to a rich variety of inorganic and organic species, including dicarboxylic acids. This study investigates firstly the composition and deliquescence properties of coarse particles containing pure malonic acid (MA2, CH2(COOH)2) and internally mixed NaCl and MA2, by means of an acoustic levitation system coupled with a Raman microspectrometer. Secondly, we report here the first experimental observation and characterization of the products arising from photochemical reactions under UV-Visible irradiation (338 ≤ λ ≤ 414 nm) in the absence of an oxidant under acoustic levitation conditions in MA2 and NaCl/MA2 aerosols. Furthermore, the impact of photodegradation on the hygroscopic properties of these particles is examined. We confirmed the irreversible formation of monosodium malonate (NaMA, HOOCCH2COONa), which coexists with NaCl or MA2 on non-irradiated particles. We also demonstrated the formation of oxalic acid (OA2, HOOC-COOH) within irradiated MA2 droplets and the appearance of glyoxylic acid (GlyA, HCOCOOH) in NaCl containing droplets. The photolysis process exerts a marked effect on the hygroscopic properties of the particles, resulting in a shift in deliquescence transitions toward higher relative humidity (RH) values. This study contributes to the understanding of the intricate physicochemical processes involved in SSA during their atmospheric transport. Likewise, this work sheds light on the impacts of these types of aerosols on cloud formation and climate change.

Exploring the hygroscopicity and chemical composition evolution in organic-inorganic aerosols: A study on internally mixed malonic acid-metal (Na+, Ca2+, Mg2+) nitrates

Chemical transformations in mixed aerosols alter the particulate physical properties. Nitrates and water soluble dicarboxylic acids, such as malonic acid (MA), are major components of ambient aerosol particles. Various metal ions such as, Na⁺, Ca²⁺, Mg²⁺ also become part of these complex aerosol systems during their atmospheric lifetime. Interactions among the co-existing ionic and molecular species govern the chemical changes in the aerosol particles. In this work, we provide a comparative account of the effect of metal ion identity (Na⁺, Ca²⁺, Mg²⁺) on such chemical changes arising from ion-molecular interactions in NaNO₃-MA, Ca(NO₃)₂-MA and Mg(NO₃)₂-MA mixed inorganic-organic aerosols. In-situ micro-Raman spectroscopy has enabled us to gain molecular level insight on formation of organic salt and simultaneously estimate nitrate depletion in these mixed aerosols during different stages of their hygroscopic cycle. In addition to the nitrate depletion often reported during the drying phase, this study has brought to light an intriguing observation: depletion of nitrate in the humidification phase as well, a phenomenon that has hitherto remained undocumented. For the mixed systems studied here, the extent of nitrate depletion follows the order Mg-MA (58%) > Ca-MA (43%) > Na-MA (15%). The comparatively huge forward shift in the acid displacement reaction equilibrium for the systems, Ca-MA and Mg-MA is driven by complexation. Our results highlight the profound effect of ion-molecular interactions on the acid displacement reaction equilibria in aerosols.

Direct quantification of changes in pH within single levitated microdroplets and the kinetics of nitrate and chloride depletion

The hygroscopicity and pH of aqueous microdroplets and smaller aerosols control their impacts on human health and the climate. Nitrate depletion and chloride depletion through the partitioning of HNO₃ and HCl into the gas phase are processes that are enhanced in micron-sized and smaller aqueous droplets and this depletion influences both hygroscopicity and pH. Despite a number of studies, uncertainties remain about these processes. While acid evaporation and the loss of HCl or HNO₃ have been observed during dehydration, there is a question as to the rate of acid evaporation and whether this can occur in fully hydrated droplets at higher relative humidity (RH). To directly elucidate the kinetics of nitrate and chloride depletion through evaporation of HNO₃ and HCl, respectively at high RH, single levitated microdroplets are probed with cavity-enhanced Raman spectroscopy. Using glycine as a novel in situ pH probe, we are able to simultaneously measure changes in microdroplet composition and pH over timescales of hours. We find that the loss of chloride from the microdroplet is faster than that of nitrate, and the calculated rate constants infer that depletion is limited by the formation of HCl or HNO₃ at the air-water interface and subsequent partitioning into the gas phase.

Spatiotemporally Resolved pH Measurement in Aerosol Microdroplets Undergoing Chloride Depletion: An Application of In Situ Raman Microspectrometry

Acidity is a defining property of atmospheric aerosols that profoundly affects environmental systems, human health, and climate. However, directly measuring the pH of aerosol microdroplets remains a challenge, especially when the microdroplets' composition is nonhomogeneous or dynamically evolving or both. As a result, a pH measurement technique with high spatiotemporal resolution is needed. Here, we report a spatiotemporally resolved pH measurement technique in microdroplets using spontaneous Raman spectroscopy. Our target sample was the microdroplets comprising sodium chloride and oxalic acid─laboratory surrogates of sea spray aerosols and water-soluble organic compounds, respectively. Our measurements show that the chloride depletion from the microdroplets caused a continuous increase in pH by ∼0.5 units in 2 hours. Meanwhile, the surface propensity of chloride anions triggers a stable pH gradient inside a single droplet, with the pH at the droplet surface lower than that at the core by ∼ 0.4 units. The uncertainties arising from the Raman detection limit (±0.08 pH units) and from the nonideal solution conditions (-0.06 pH units) are constrained. Our findings indicate that spontaneous Raman spectroscopy is a simple yet robust technique for precise pH measurement in aerosols with high spatiotemporal resolution.

Displacement of Strong Acids or Bases by Weak Acids or Bases in Aerosols: Thermodynamics and Kinetics

Depletion of chloride, nitrate, or ammonium from atmospheric aerosols represents a unique class of displacement reactions in which strong acids (HCl and HNO₃) or bases (NH₃) are substituted by weaker ones (i.e., dicarboxylic acids or dicarboxylate salts, respectively). These reactions alter the aerosol composition and perturb the atmospheric cycle of volatile compounds, thereby affecting environmental systems and climate. Despite the profound implications, the mechanism of these unique displacement reactions remains unclear. Here, we elucidate the thermodynamics and kinetics of these reactions using the multiphase buffer theory and a diffusion-controlled mass-transfer function, respectively. On the thermodynamic aspect, we find that the effective dissociation constants of the strong acids and bases in aerosols are 2 to 10 orders of magnitude lower than those in bulk solutions. On the kinetic aspect, we find that displacement reactions occur rapidly in aerosol microdroplets with a radius below 10 μm. Within this size range, the characteristic reaction time is always shorter than the lifetime of the aerosols in the atmosphere. Our findings suggest that the unique displacement reactions can significantly modify the composition of atmospheric aerosols, and consequentially, these aerosols may manifest distinct properties unforeseen by the chemistry of homogeneous bulk systems.

Mid-infrared spectroscopy of hemispherical water droplets

As an important component of atmospheric aerosols, water is profoundly related with aerosol hygroscopicity and provides a medium for atmospheric heterogeneous reactions. The quantitative analysis of water content in aerosol droplets is instrumental to understanding atmospheric chemistry, as well as to addressing the related environmental issues, such as air pollution and climate change. Fourier transform infrared (FTIR) spectroscopy has been widely adopted to quantify the amount of water content in atmospheric aerosols, which is based on the absorbance of OH functional group in proportion to water content. However, in the OH stretching vibration band around 3400 cm^-1, spectral distortions may occur, making a quantitative analysis impossible. In addressing this issue, here we put forth a model to simulate the FTIR absorption of hemispherical water droplets, along with a quantitative description of the spectral distortion. Our model prediction was benchmarked with the microscopic-FTIR experiments conducted on sodium sulfate droplets, and good agreements between theoretical and experimental results were found. We observed that the absorbance spanning across the mid-wavenumber infrared region increases with water absorption coefficients; while such an increasing trend was not seen in the 3400 cm^-1 band. We speculate that the spectral saturated absorption is related to the absorption coefficient of water and the ratio of the projected area of droplets to the aperture area. In addition, the effects of droplet size and number density on the absorption spectra were investigated. The waveband range of the saturated absorption broadens with an increase in droplet radius. On the other hand, as the number density of water droplets increases, the absorption at 3400 cm^-1 is enhanced, and the characteristic peak of condensed water becomes increasingly sharper, asymptotic to the typical infrared spectra of water collected by the pressing method.

Strong Acids or Bases Displaced by Weak Acids or Bases in Aerosols: Reactions Driven by the Continuous Partitioning of Volatile Products into the Gas Phase

Aerosols are ubiquitous in the atmosphere and profoundly affect climate systems and human health. To gain more insights on their broad impacts, we need to comprehensively understand the fundamental properties of atmospheric aerosols. Since aerosols are multiphase, a dispersion of condensed matter (solid particles or liquid droplets, hereafter particles) in gas, partitioning of volatile matter between the condensed and the gas phases is one defining characteristic of aerosols. For example, water content partitioning under different relative humidity conditions, known as aerosol hygroscopicity, has been extensively investigated in the past decades. Meanwhile, partitioning of volatile organic or inorganic components, which is referred to as aerosol volatility, remains understudied. Commonly, a bulk solution system is treated as a single phase, with volatility mainly determined by the nature of its components, and the composition partitioning between solution and gas phase is limited. Aerosols, however, comprise an extensive gas phase, and their volatility can also be induced by component reactions. These reactions occurring within aerosols are driven by the formation of volatile products and their continuous partitioning into the gas phase. As a consequence, the overall aerosol systems exhibit prominent volatility. Noteworthily, such volatility induced by reactions is a phenomenon exclusively observed in the multiphase aerosol systems, and it is trivial in bulk solutions due to the limited extent of liquid-gas partitioning. Take the chloride depletion in sea salt particles as an example. Recent findings have revealed that chloride depletion can be caused by reactions between NaCl and weak organic acids, which release HCl into the gas phase. Such a reaction can be described as a strong acid displaced by a weak acid, which is hardly observed in bulk phase. Generally, this unique partitioning behavior of aerosol systems and its potential to alter aerosol composition, size, reactivity, and other physicochemical properties merits more attention by atmospheric community.This Account focuses on the recent advancements in the research of component reactions that induce aerosol volatility. These reactions can be categorized into four types: chloride depletion, nitrate depletion, ammonium depletion, and salt hydrolysis. The depletion of chloride or nitrate can be regarded as a displacement reaction, in which a strong acid is displaced by a weak acid. Such a reaction releases highly volatile HCl or HNO₃ into the gas phase and leads to a loss of chloride or nitrate within the particles. Likewise, ammonium depletion is a displacement reaction in which a strong base is displaced by a weak base, resulting in release of ammonia and substantial changes in aerosol hygroscopicity. In addition, aerosol volatility can also be induced by salt hydrolysis in a specific case, which is sustained by the coexistence of proton acceptor and hydroxide ion acceptor within particles. Furthermore, we quantitatively discuss these displacement reactions from both thermodynamic and kinetic perspectives, by using the extended aerosol inorganic model (E-AIM) and Maxwell steady-state diffusive mass transfer equation, respectively. Given the ubiquity of component partitioning in aerosol systems, our discussion may provide a new perspective on the underlying mechanisms of aerosol aging and relevant climate effects.

A review of efflorescence kinetics studies on atmospherically relevant particles

The efflorescence transitions of aerosol particles have been intensively investigated due to their critical impacts on global climate and atmospheric chemistry. In the present study, we present a critical review of efflorescence kinetics focusing on three key issues: the efflorescence relative humidity (ERH) and the influence factors for aerosol ERH (e.g. particle sizes, and temperature); efflorescence processes of mixed aerosols, concerning the effect of coexisting inorganic and organic components on the efflorescence of inorganic salts; homogeneous and heterogeneous nucleation rates of pure and mixed aerosols. Among the previous studies, there are significant discrepancies for measured aerosol ERH under even the same conditions. Moreover, the interactions between organic and inorganic components remain largely unclear, causing efflorescence transition behaviours and chemical composition evolutions of certain mixed systems to be debatable. Thus, it is important to better understand efflorescence to gain insights into the physicochemical properties and characterize observed efflorescence characteristics of atmospheric particles, as well as guide further studies on aerosol hygroscopicity and reactivity.

Hygroscopic behavior and chemical reactivity of aerosols generated from mixture solutions of low molecular weight dicarboxylic acids and NaCl

Ambient sea spray aerosols (SSAs) have been reported to undergo reactions with low molecular weight dicarboxylic acids (LMW DCAs). In the present study, the hygroscopic behavior of aerosols generated from NaCl-LMW DCA mixture solutions with different mixing ratios was explained. In situ Raman microspectrometry (RMS) was used to simultaneously monitor the alterations in chemical composition, size, and phase as a function of the relative humidity (RH) for individual aerosols. The observation of individual mixture aerosols revealed chemical reactions on the timescale of one hour in the aqueous phase, mostly during the dehydration process, leading to the formation of sodium salts of DCAs with distinct reactivities among different DCAs and mixing ratios, which in turn exhibited diverse hygroscopic behaviors. The NaCl-DCA mixture aerosols were either in a ternary NaCl-DCA-DCA sodium salt system or a binary NaCl-DCA sodium salt or DCA-DCA sodium salt system, instead of a binary NaCl-DCA system when experiencing the hygroscopic process. The chemical compositional evolution of the NaCl-DCA aerosols during the hygroscopic measurements was examined based on the Raman spectra acquired for aqueous, amorphous, and/or crystalline pure standard aerosols at specific RHs. The different reactivity observed among the DCAs with different mixing ratios suggests that the reactivity driven by the irreversible liberation of HCl is governed mainly by the available aqueous H⁺ because Cl^- is always available in the aqueous NaCl-DCA aerosols until the complete consumption of NaCl.

Individual particle investigation on the chloride depletion of inland transported sea spray aerosols during East Asian summer monsoon

Inland transported sea spray aerosol (SSA) particles along with multiphase reactions are essential to drive the regional circulation of nitrogen, sulfur and halogen species in the atmosphere. Specially, the physicochemical properties of SSA will be significantly affected by the displacement reaction of chloride. However, the role of organic species and the mixing state on the chloride depletion of SSA during long-range inland transport remains unclear. Hence, a single particle aerosol mass spectrometer (SPAMS) was employed to investigate the particle size and chemical composition of individual SSA particles over inland southern China during the East Asian summer monsoon. Based on the variation of chemical composition, SSA particles were clustered into SSA-Aged, SSA-Bio and SSA-Ca. SSA-Aged was regarded as the aged Na-rich SSA particles. In comparison to the SSA-Aged, SSA-Bio involved some extra organic species associated with biological origin (i.e., organic nitrogen and phosphate). Each type occupies for approximately 50% of total detected SSA particles. Besides, SSA-Ca may relate to organic shell of Na-rich SSA particles, which is negligible (~3%). Tight correlation between Na and diverse organic acids was exhibited for the SSA-Aged (r² = 0.52, p < 0.01) and SSA-Bio (r² = 0.61, p < 0.01), reflecting the impact of organic acids to the chloride displacement during inland transport SSA particles. The chloride depletion occupied by organic acids is estimated to be up to 34%. It is noted that distinctly different degree of chloride depletion was observed between SSA-Aged and SSA-Bio. It is more likely to be attributed to the associated organic coatings for the SSA-Bio particles, which inhibits the displacement reactions between acids and chloride. As revealed from the mixing state of SSA-Bio, defined hourly mean peak area ratio of Cl / Na increases with the increasing phosphate and organic nitrogen. This finding provides additional basis for the improvement of modeling simulations in chlorine circulation and a comprehensive understanding of the effects of organics on chloride depletion of SSA particles.

Impact of the particle mixing state on the hygroscopicity of internally mixed sodium chloride-ammonium sulfate single droplets: a theoretical and experimental study

Sodium chloride (NaCl) is the main constituent of sea-salt aerosols. During atmospheric transport, sea-salt aerosols can interact with gases and other particles including secondary aerosols containing ammonium sulfate ((NH4)2SO4). This paper reports on the deliquescence relative humidity (DRH) of internally mixed sodium chloride-ammonium sulfate (NaCl/(NH4)2SO4) coarse particles by means of an acoustic levitation system fitted with a confocal Raman microscope (CRM). The chemical composition and physical state of individual levitated particles of different initial NaCl mole fractions were monitored during the deliquescence cycle by CRM. Experimental results were compared to the data predicted by the thermodynamic model E-AIM (Extended-Aerosol Inorganics Model). We demonstrated that NH4Cl, Na2SO4 and NH4NaSO4·2H2O are formed in recrystallized particles and coexist with NaCl and (NH4)2SO4. All these products are randomly distributed within the particles. Deliquescence curves described two or three-stage phase transitions depending on the initial composition of the droplet. Significant discrepancies between the model and the laboratory experiments were observed for NaCl mole fractions varying between 0.40 and 0.77 due to a divergence between the predicted and the truly present products in the particles' solid fraction during the humidification cycle.

Glass surface evolution following gas adsorption and particle deposition from indoor cooking events as probed by microspectroscopic analysis

Indoor surfaces are extremely diverse and their interactions with airborne compounds and aerosols influence the lifetime and reactivity of indoor emissions. Direct measurements of the physical and chemical state of these surfaces provide insights into the underlying physical and chemical processes involving surface adsorption, surface partitioning and particle deposition. Window glass, a ubiquitous indoor surface, was placed vertically during indoor activities throughout the House Observations of Microbial and Environmental Chemistry (HOMEChem) campaign and then analyzed to measure changes in surface morphology and surface composition. Atomic force microscopy-infrared (AFM-IR) spectroscopic analyses reveal that deposition of submicron particles from cooking events is a contributor to modifying the chemical and physical state of glass surfaces. These results demonstrate that the deposition of glass surfaces can be an important sink for organic rich particles material indoors. These findings also show that particle deposition contributes enough organic matter from a single day of exposure equivalent to a uniform film up to two nanometers in thickness, and that the chemical distinctness of different indoor activities is reflective of the chemical and morphological changes seen in these indoor surfaces. Comparison of the experimental results to physical deposition models shows variable agreement, suggesting that processes not captured in physical deposition models may play a role in the sticking of particles on indoor surfaces.

Sea spray aerosol formation: Results on the role of different parameters and organic concentrations from bubble bursting experiments

Submicron sea spray aerosol (SSA) particles play an essential role in atmospheric chemical processes and the Earth's radiative balance. In this study, different combinations of NaCl, MgSO₄, malonic acid (MA), d-fructose and sodium malonate were used to explore the effect of MA on submicron SSA generation. SSA particles were produced at room temperature by bubble bursting from an adjustable home-built SSA generator with sintered glass filters. We found that MA could promote the generation of SSA particles and make the geometric mean diameter (GMD) to decrease for MA concentrations ranging between 8 and 32 mM and then, to increase for MA concentrations in the range of 64-160 mM. d-fructose could improve the generation of SSA with increasing GMD. Interestingly, sodium malonate could significantly enhance the production of SSA, with the change of morphology. Besides, different parameters including flow rate, underwater depth, pore size and size span of sintered glass filter and salinity of water were tested to obtain the characterization of our self-made adjustable SSA generator. Three modes could be found among different SSA generation methods, and they exhibited an obvious accumulation mode around 100 nm. The SSA generation under different conditions was compared with oceanic measurements from the literature, which showed that the sintered glass filter has advantages in generating submicron SSA from film drops.

Identification of most preferable reaction pathways for chloride depletion from size segregated sea-salt aerosols: A study over high altitude Himalaya, tropical urban metropolis and tropical coastal mangrove forest in eastern India

Depletion of chloride from sea-salt aerosols affects their hygroscopicity, cloud condensation nuclei activity as well as microphysical and chemical properties of aerosols and clouds modifying earth-atmosphere radiative balance. Here, we proposed five possible reaction pathways through which the inorganic acids (H₂SO₄ and HNO₃) could deplete chloride from sea-salt aerosols. We determined "maximum potential contribution" (MPC) of each acid and compared the MPC with actual chloride depletion. This step-by-step approach enables us to identify the most preferable reaction pathway(s) for coarse, superfine, accumulation and ultrafine aerosols over a Himalayan station (Darjeeling), a tropical urban station (Kolkata) and a tropical mangrove forest at the north-east coast of Bay of Bengal (Sundarban) in India. Over Kolkata and Darjeeling, locally generated acids reacted with transported sea-salts. Over Sundarban, the locally generated sea-salts from the Bay of Bengal reacted with the acids of biomass burning plume transported from Eastern Ghat and continental haze transported from upper Indo-Gangetic Plain. The average chloride depletion in PM10 ranged between 70 and 74% over Sundarban and 31-34% over Kolkata and Darjeeling. We observed that HNO₃(g) depleted the larger (>1 μm) chlorides whereas H₂SO₄(g) depleted the smaller (<1 μm) chlorides over Kolkata and Darjeeling. However, in addition to H₂SO₄(g) and HNO₃(g), some other species could be involved in chloride depletion over Sundarban mainly during winter. The study reveals that Sundarban acts as the major sink of the inorganic acids transported from Eastern Ghat biomass burning plume inhibiting their further advection towards inland regions.

Adsorption Capacities of Hygroscopic Materials Based on NaCl-TiO2 and NaCl-SiO2 Core/Shell Particles

Hygroscopic materials which possess high moisture adsorption capacity were successfully upgraded by the functionalization of sodium chloride (NaCl) using two nuances of oxides. A procedure was developed to first prepare submicron-sized NaCl crystals; thereafter, these crystals were coated by choice of either titanium dioxide (TiO2) or silica (SiO2) to enhance the hygroscopic properties of NaCl and prevent its premature deliquescence. After coating, several analytical techniques were employed to evaluate the obtained composite materials. Our findings revealed that both composites NaCl-TiO2 and NaCl-SiO2 gave excellent performances by exhibiting interesting hydrophilic properties, compared to the sole NaCl. This was demonstrated by both environmental scanning electron microscope (ESEM) and water vapor adsorption experiments. In particular, NaCl-TiO2 composite showed the highest water adsorption capacity at low relative humidity and at a faster adsorption rate, induced by the high surface energy owing to the presence of TiO2. This result was also confirmed by the kinetics of adsorption, which revealed that not only does NaCl-TiO2 adsorb more water vapor than NaCl-SiO2 or sole NaCl but also the adsorption occurred at a much higher rate. While at room temperature and high relative humidity, the NaCl-SiO2 composite showed the best adsorption properties making it ideal to be used as a hygroscopic material, showing maximum adsorption performance compared to NaCl-TiO2 or sole NaCl. Therefore, NaCl-TiO2 and NaCl-SiO2 composites could be considered as promising hygroscopic materials and potential candidates to replace the existing salt seeding agents.

Chemical Imaging of Atmospheric Particles

Airborne particles are very dynamic and highly reactive components of the Earth's atmosphere. Their high surface area and water content provide a unique reaction environment for multiphase chemistry that continually modifies particle composition and properties that consequently impact air quality as well as concentrations of gas-phase species. By absorbing and scattering solar and terrestrial radiation, particles directly influence the planet's radiative balance. Their indirect effects include modifying the nucleation, lifetime, and physical properties of clouds. Due to the sensitivity of the atmospheric environment to all these variables, fundamental studies of chemical transformations of atmospheric particles, their sources, continuously evolving composition, and physical properties are of highest research priority. Accurate descriptions of particles and their effects in the atmosphere require comprehensive information not only on the particle-type populations and their size distributions and concentrations, but also on the diversity and the spatial heterogeneity of chemical components within individual particles. Developments and applications of modern chemical imaging approaches for off-line characterization of atmospheric particles have been at the forefront of modern experimental studies and have resulted in a transformative impact in atmospheric chemistry and physics. This Account presents a synopsis of recent advances in chemical imaging of atmospheric particles collected on substrates during field and laboratory experiments. The unique advantage of chemical imaging methods is that they simultaneously provide two analytical measurements: imaging of particles to assess variability in their individual sizes and morphology, as well as particle-specific speciation of their composition and spatial heterogeneity of different chemical components within individual particles. We also highlight analytical chemistry approaches that enable chemical imaging of particles with different levels of elemental and molecular specificity, including applications of multimodal methodologies where the same or similar groups of particles are probed by two or more complementary techniques. These approaches provide unique experimental insights on the nature and sources of particles, understanding their physical properties, atmospheric reactivity, and transformations. Chemical imaging data provide unique experimental input for atmospheric models that simulate aging and changes in particle-type populations, internal composition, and their associated optical and cloud forming properties. We highlight applications of chemical imaging in selected recent studies, discuss their existing limitations, and forecast future research directions for this area.

Measuring hygroscopicity of internally mixed NaNO3 and glutaric acid particles by vacuum FTIR

Sodium nitrate as an important inorganic component can be chemically formed from the reactions of nitrogen oxides and nitric acid (HNO₃) with sea salt in atmosphere. Organic acids contribute a significant fraction of photochemical formed secondary organics that can condense on the preexisting nitrate-containing particles. Atmospheric particles often include a complex mixture of nitrate and secondary organic materials accumulated within the same individual particles. Here we studied the hygroscopicity of aerosol particles composed of sodium nitrate and glutaric acid (GA) by using a pulsed RH controlling system and a rapid scan vacuum FTIR spectrometer (PRHCS-RSVFTIR). The water content in the particles and efflorescence ratios of both NaNO₃ and GA at ambient relative humidity (RH) as a function of time were obtained from the rapid-scan infrared spectra with a sub-second time resolution. Our study showed that both NaNO₃ and GA crystallized at 44.1% RH during two different RH control processes (stepwise and pulsed processes). It was found that the addition of GA could suppress the efflorescence of NaNO₃ during the dehumidifying process. In addition, the mixed NaNO₃/GA particles release HNO₃ during the dehumidifying and humidifying cycles. These findings are important in further understanding the role of interactions between water-soluble dicarboxylic acids and nitrates on hygroscopicity and environmental effects of atmospheric particles.

Hygroscopicity and Compositional Evolution of Atmospheric Aerosols Containing Water-Soluble Carboxylic Acid Salts and Ammonium Sulfate: Influence of Ammonium Depletion

Water-soluble organic acid salts are important components of atmospheric aerosols. Despite their importance, it is still not clear how water-soluble organic acid salts influence interactions between aerosols and water vapor in the atmosphere. In this study, the hygroscopic behaviors and chemical compositions of aerosol particles containing water-soluble organic acid salt ((CH₂) _n(COONa)₂, n = 0, 1, 2) and (NH₄)₂SO₄ were measured using in situ attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The ammonium depletion due to release of gaseous NH₃ was found in mixed aerosols composed of (CH₂) _n(COONa)₂ ( n = 1, 2) and (NH₄)₂SO₄ upon dehydration. The ammonium loss could modify the aerosol composition, resulting in the formation of corresponding organic acid and monosodium dicarboxylate in mixed particles with high and low (NH₄)₂SO₄ content, respectively. Due to the weaker hydrolysis of oxalate anions, the ammonium depletion was not observed for the Na₂C₂O₄/(NH₄)₂SO₄ mixtures. The changes in the particle composition led to the decreased water uptake upon hydration as compared to that upon dehydration. Our findings reveal that interactions between water-soluble organic acid salts and (NH₄)₂SO₄ in aqueous aerosols may affect the repartition of NH₃ between the condensed and gas phases, thus modifying composition and physicochemical properties of aerosols as well as relevant chemical processes.

Hygroscopic behavior and fractional crystallization of mixed (NH4)2SO4/glutaric acid aerosols by vacuum FTIR

The hygroscopicity and phase transition of the mixed aerosol particles are significantly dependent upon relative humidity (RH) and interactions between particle components. Although the efflorescence behavior of particles has been studied widely, the crystallization behavior of each component in the particles is still poorly understood. Here, we study the hygroscopicity and crystallization behaviors of internally mixed ammonium sulfate (AS)/glutaric acid (GA) aerosols by a vacuum FTIR spectrometer coupled with a RH-controlling system. The mixed AS/GA aerosols in two different RH control processes (equilibrium and RH pulsed processes) show the fractional crystallization upon dehydration with AS crystallizing prior to GA in mixed particles with varying organic to inorganic molar ratios (OIRs). The initial efflorescence relative humidity (ERH) of AS decreased from ~43% for pure AS particles to ~41%, ~36% and ~34% for mixed AS/GA particles with OIRs of 2:1, 1:1 and 1:2, respectively. Compared to the ERH of 35% for pure GA, the initial ERHs of GA in mixed AS/GA particles were determined to be 31%, 30% and 28% for OIRs of 2:1, 1:1 and 1:2, respectively, indicating that the presence of AS decreased the crystallization RH of GA instead of inducing the heterogeneous nucleation of GA. When the AS fractions first crystallized at around 36% RH in the 1:1 mixed particles, GA remained noncrystalline until 30% RH. For the first time, the crystallization ratios of AS and GA are obtained for the internally mixed particles during the rapid downward RH pulsed process. The crystallization ratio of AS can reach around 100% at around 24% RH for both pure AS and the 1:1 mixed particles, consistent with the equilibrium RH process. It is clear that the RH downward rate did not influence efflorescence behavior of AS in pure AS and AS in mixed particles. In contrast, the crystallization ratio of GA can reach about 90% at 15.4% RH for pure GA particles in excellent agreement with the equilibrium RH process, whereas it is only up to 50% at 16.0% RH in the 1:1 mixed particles during the rapid downward pulsed process lower than that of the equilibrium RH process. Our results reveal that the rapid RH downward rate could inhibit the efflorescence of GA in the mixed droplets.

Chemical reaction between sodium pyruvate and ammonium sulfate in aerosol particles and resultant sodium sulfate efflorescence

The hygroscopicity of aerosols is dependent upon their chemical composition. When their chemical compositions are altered, the water content in aerosols often changes, which may further modify phase behaviour. However, the study of phase behaviour dependence on chemical reactions is still limited. In this work, internally mixed sodium pyruvate (SP)/ammonium sulfate (AS) droplets were studied using an in-situ ATR-FTIR spectrometer. FTIR spectral analysis showed that solid sodium sulfate (SS) formed during the dehydration process, indicating a chemical reaction between SP and AS. In addition, the water content decreased after a dehydration-hydration process despite organic salt (SS) to inorganic salt (AS) mole ratios (OIRs) During the second relative humidity (RH) cycle, the water content remained constant, however, the efflorescence relative humidity (ERH) was lower than that in the first dehydration. The crystal relative humidities (CRHs) of SS are 66.7-53.1%, 66.0-58.2%, 62.2-57.1% and 49.6-43.6% for OIRs of 3:1, 2:1, 1:1 and 1:3, respectively, suggesting the crystallization of SS was favoured by higher SP content. For 2:1 OIRs, the solid SS was the greatest and an excess of either SP or AS blocked the solid SS formation. At a constant 80% RH, depletion of reagents was ∼0.97, and water loss was ∼0.6 in ∼40 min. After 90 min, solid SS formed. The chemical reaction was faster than water loss; furthermore, water loss from the chemical reaction led to solid SS above the ERH of pure SS particles (∼75% RH). When the RH changed rapidly, the reaction was slow and solid SS decreased.

The Hydropathy Scale as a Gauge of Hygroscopicity in Sub-Micron Sodium Chloride-Amino Acid Aerosols

Sodium chloride, NaCl, is commonly used as a proxy for sea spray aerosols. However, field work has demonstrated that sea spray aerosols also often contain a significant organic component. In this work, we examine the effect of amino acids on the hygroscopic properties of NaCl aerosols using a Fourier transform infrared spectrometer coupled to a flow-cell apparatus. It is found that the effect can be drastically different depending on the nature of the amino acid. More hydrophilic amino acids such as glycine lead to continuous hygroscopic growth of internally mixed NaCl-amino acid aerosols generated from an equimolar precursor solution. However, more hydrophobic amino acids such as alanine do not significantly alter the hygroscopicity of NaCl aerosols. The hydropathy scale is found to be a good qualitative diagnostic for the effect that an amino acid will have on the hygroscopicity of NaCl.

Observing HNO3 release dependent upon metal complexes in malonic acid/nitrate droplets

Although the dicarboxylic acid has been reported to react with nitrate for aged internally mixed aerosols in atmosphere, the quantitative nitrate depletion dependent upon composition in particles is still not well constrained. The chemical composition evolutions for malonic acid/sodium nitrate (MA/SN), malonic acid/magnesium nitrate (MA/MN) and malonic acid/calcium nitrate (MA/CN) particles with the organic to inorganic molar ratio (OIR) of 1:1 are investigated by vacuum Fourier transform infrared spectroscopy (FTIR). Upon dehydration, the intensity of the asymmetric stretching mode of COO^- group (ν_as-COO^-) increases, accompanying the decrease in OH feather band and COOH band and NO₃^- band. These band changes suggest malonate salts formation and HNO₃ release. The quantitative NO₃^- depletion data shows that the reactivity of MA-MN is most and that of MA-SN is least. Analysis of the stretching mode of COO^- indicates the different bond type between metal cation and carboxylate anion. In addition, water content in particles decreases at the constant RH, implying water loss with the chemical reaction. When the RH changes very quickly, water uptake delay during the humidification process reveals that water mass transport is limited below 37% RH.

Investigation on the hygroscopicity of oxalic acid and atmospherically relevant oxalate salts under sub- and supersaturated conditions

Oxalic acid (OxA) is an end product in the oxidation of many organic compounds, and therefore is ubiquitous in the atmosphere and is often the most abundant organic species in ambient aerosols. To better understand the hygroscopic properties of OxA under sub- and supersaturated conditions in the atmosphere, we investigated the hygroscopic growth and cloud condensation nuclei (CCN) activation ability of pure OxA and its salts using a hygroscopic tandem differential mobility analyzer (HTDMA) and cloud condensation nuclei counter (CCNC), respectively. OxA particles absorb water under >45% RH, suggesting that the initial phase state might be an amorphous solid. The measured hygroscopic growth factor (HGF) of OxA at 90% RH was 1.47. We found that the HGF of ammonium oxalate (NH4-Ox) was larger than that of OxA, whereas HGFs of sodium, calcium, and magnesium oxalates (Na-Ox, Ca-Ox, and Mg-Ox) were smaller than that of OxA particles. Potassium oxalate (K-Ox) behaved like a typical water-soluble inorganic salt, exhibiting deliquescence and efflorescence transitions at around 85% and 50% RH, respectively. Na-Ox exhibited strong activation capabilities among all the investigated salts, followed by NH4-Ox and K-Ox as inferred from the activation ratios (CCN/CN) against supersaturations (SS). On the other hand, Ca-Ox showed moderate activation ability and Mg-Ox showed poor CCN activation ability. We also observed significantly higher κCCN values compared to κHTDMA for pure OxA and its salts (NH4-Ox and Na-Ox), suggesting that the condensation of OxA into the aqueous phase occurs during water uptake. These findings improve the fundamental understanding of hygroscopic behaviors and phase states of oxalic acid and its salts under sub- and supersaturated conditions in the atmosphere and impacts of hygroscopicity on the direct and indirect effects of aerosol particles.

Vacuum FTIR study on the hygroscopicity of magnesium acetate aerosols

Hygroscopicity and volatility of secondary organic aerosol (SOA) are two important properties, which determine the composition, concentration, size, phase state of SOA and thus chemical and optical properties for SOA. In this work, magnesium acetate (Mg(Ac)₂) aerosol was used as a simple SOA model in order to reveal relationship between hygroscopicity and volatility. A novel approach was set up based on a combination of a vacuum FTIR spectrometer and a home-made relative humidity (RH) controlling system. The striking advantage of this approach was that the RH and the compositions of aerosols could be obtained from a same IR spectrum, which guaranteed the synchronism between RH and spectral features on a sub-second scale. At the constant RH of 90% and 80% for 3000s, the water content within Mg(Ac)₂ aerosol particles decreased about 19.0% and 9.4% while there were 13.4% and 6.0% of acetate loss. This was attributed to a cooperation between volatile of acetic acid and Mg²⁺ hydrolysis in Mg(Ac)₂ aerosols, which greatly suppressed the hygroscopicity of Mg(Ac)₂ aerosols. When the RH changed with pulsed mode between ~70% and ~90%, hygroscopicity relaxation was observed for Mg(Ac)₂ aerosols. Diffuse coefficient of water in the relaxation process was estimated to be ~5×10^-12m²·s^-1 for the Mg(Ac)₂ aerosols. Combining the IR spectra analysis, the decrease in the diffuse coefficient of water was due to the formation of magnesium hydroxide accompanying acetic acid evaporation in the aerosols.

Core/Shell Microstructure Induced Synergistic Effect for Efficient Water-Droplet Formation and Cloud-Seeding Application

Cloud-seeding materials as a promising water-augmentation technology have drawn more attention recently. We designed and synthesized a type of core/shell NaCl/TiO₂ (CSNT) particle with controlled particle size, which successfully adsorbed more water vapor (∼295 times at low relative humidity, 20% RH) than that of pure NaCl, deliquesced at a lower environmental RH of 62-66% than the hygroscopic point (h_g.p., 75% RH) of NaCl, and formed larger water droplets ∼6-10 times its original measured size area, whereas the pure NaCl still remained as a crystal at the same conditions. The enhanced performance was attributed to the synergistic effect of the hydrophilic TiO₂ shell and hygroscopic NaCl core microstructure, which attracted a large amount of water vapor and turned it into a liquid faster. Moreover, the critical particle size of the CSNT particles (0.4-10 μm) as cloud-seeding materials was predicted via the classical Kelvin equation based on their surface hydrophilicity. Finally, the benefits of CSNT particles for cloud-seeding applications were determined visually through in situ observation under an environmental scanning electron microscope on the microscale and cloud chamber experiments on the macroscale, respectively. These excellent and consistent performances positively confirmed that CSNT particles could be promising cloud-seeding materials.

Hygroscopicity of internally mixed particles composed of (NH4)2SO4 and citric acid under pulsed RH change

In this research, we applied a pulsed RH controlling system and a rapid scan vacuum FTIR spectrometer (PRHCS-RSVFTIR) to investigate hygroscopicity of internally mixed (NH₄)₂SO₄(AS)/citric acid (CA) particles. The water content and efflorescence ratio of AS in the particles and ambient relative humidity (RH) as a function of time were obtained with a subsecond time resolution. The hygroscopic behavior of AS aerosols in two different RH control processes (equilibrium and RH pulsed processes) showed that AS droplets crystallize with RH ranging from 42% to 26.5%. It was found that the half-life time ratio between the water content in the CA particles and the gas phase under RH pulsed change was greater than one under low RH conditions (<40% RH), indicating the significant water transfer limitation due to the high viscosity of CA aerosols at low RH, especially at RH<20%. In addition, water diffusion constants between 10^-12 m² s^-1 and 10^-13 m² s^-1 in micron size CA aerosols were obtained in a sub-second and second timescale. The addition of AS enhanced the water transfer limitation in the mixed aerosols. The efflorescence relative humidity (ERH) of the mixed particles with AS/CA by molar ratio 3:1 was found between 22.7% and 5.9%, which was much lower than AS particles. No efflorescence process was observed for the 1:1 mixed particles, indicating that CA greatly suppressed nucleation of AS. Our results have shown that the PRHCS-RSVFTIR is effective to simulate hygroscopicity and water transport of aerosols under fast variations in RH in atmosphere.

Inland Sea Spray Aerosol Transport and Incomplete Chloride Depletion: Varying Degrees of Reactive Processing Observed during SOAS

Multiphase reactions involving sea spray aerosol (SSA) impact trace gas budgets in coastal regions by acting as a reservoir for oxidized nitrogen and sulfur species, as well as being a source of halogen gases (HCl, ClNO₂, etc.). Whereas most studies of multiphase reactions on SSA have focused on marine environments, far less is known about SSA transported inland. Herein, single-particle measurements of SSA are reported at a site >320 km from the Gulf of Mexico, with transport times of 7-68 h. Samples were collected during the Southern Oxidant and Aerosol Study (SOAS) in June-July 2013 near Centreville, Alabama. SSA was observed in 93% of 42 time periods analyzed. During two marine air mass periods, SSA represented significant number fractions of particles in the accumulation (0.2-1.0 μm, 11%) and coarse (1.0-10.0 μm, 35%) modes. Chloride content of SSA particles ranged from full to partial depletion, with 24% of SSA particles containing chloride (mole fraction of Cl/Na ≥ 0.1, 90% chloride depletion). Both the frequent observation of SSA at an inland site and the range of chloride depletion observed suggest that SSA may represent an underappreciated inland sink for NO_x/SO₂ oxidation products and a source of halogen gases.

Impact of Wildfire Emissions on Chloride and Bromide Depletion in Marine Aerosol Particles

This work examines particulate chloride (Cl^-) and bromide (Br^-) depletion in marine aerosol particles influenced by wildfires at a coastal California site in the summers of 2013 and 2016. Chloride exhibited a dominant coarse mode due to sea salt influence, with substantially diminished concentrations during fire periods as compared to nonfire periods. Bromide exhibited a peak in the submicrometer range during fire and nonfire periods, with an additional supermicrometer peak in the latter periods. Chloride and Br^- depletions were enhanced during fire periods as compared to nonfire periods. The highest observed %Cl^- depletion occurred in the submicrometer range, with maximum values of 98.9% (0.32-0.56 μm) and 85.6% (0.56-1 μm) during fire and nonfire periods, respectively. The highest %Br^- depletion occurred in the supermicrometer range during fire and nonfire periods with peak depletion between 1.8-3.2 μm (78.8% and 58.6%, respectively). When accounting for the neutralization of sulfate by ammonium, organic acid particles showed the greatest influence on Cl^- depletion in the submicrometer range. These results have implications for aerosol hygroscopicity and radiative forcing in areas with wildfire influence owing to depletion effects on composition.

Assessing the Dynamics of Organic Aerosols over the North Atlantic Ocean

The influence of aerosols on climate is highly dependent on the particle size distribution, concentration, and composition. In particular, the latter influences their ability to act as cloud condensation nuclei, whereby they impact cloud coverage and precipitation. Here, we simultaneously measured the concentration of aerosols from sea spray over the North Atlantic on board the exhaust-free solar-powered vessel “PlanetSolar”, and the sea surface physico-chemical parameters. We identified organic-bearing particles based on individual particle fluorescence spectra. Organic-bearing aerosols display specific spatio-temporal distributions as compared to total aerosols. We propose an empirical parameterization of the organic-bearing particle concentration, with a dependence on water salinity and sea-surface temperature only. We also show that a very rich mixture of organic aerosols is emitted from the sea surface. Such data will certainly contribute to providing further insight into the influence of aerosols on cloud formation, and be used as input for the improved modeling of aerosols and their role in global climate processes.

Hygroscopic properties of potassium chloride and its internal mixtures with organic compounds relevant to biomass burning aerosol particles

While water uptake of aerosols exerts considerable impacts on climate, the effects of aerosol composition and potential interactions between species on hygroscopicity of atmospheric particles have not been fully characterized. The water uptake behaviors of potassium chloride and its internal mixtures with water soluble organic compounds (WSOCs) related to biomass burning aerosols including oxalic acid, levoglucosan and humic acid at different mass ratios were investigated using a hygroscopicity tandem differential mobility analyzer (HTDMA). Deliquescence points of KCl/organic mixtures were observed to occur at lower RH values and over a broader RH range eventually disappearing at high organic mass fractions. This leads to substantial under-prediction of water uptake at intermediate RH. Large discrepancies for water content between model predictions and measurements were observed for KCl aerosols with 75 wt% oxalic acid content, which is likely due to the formation of less hygroscopic potassium oxalate from interactions between KCl and oxalic acid without taken into account in the model methods. Our results also indicate strong influence of levoglucosan on hygroscopic behaviors of multicomponent mixed particles. These findings are important in further understanding the role of interactions between WSOCs and inorganic salt on hygroscopic behaviors and environmental effects of atmospheric particles.

Real-Time Investigation of Chemical Compositions and Hygroscopic Properties of Aerosols Generated from NaCl and Malonic Acid Mixture Solutions Using in Situ Raman Microspectrometry

Recently, ambient sea spray aerosols (SSAs) have been reported to undergo reactions with dicarboxylic acids (DCAs). Several studies have examined the hygroscopic behavior and chemical reactivity of aerosols generated from NaCl-DCA mixture solutions, but the results have varied, especially for the NaCl-malonic acid (NaCl-MA) mixture system. In this work, in situ Raman microspectrometry (RMS) was used to simultaneously monitor the change in chemical composition, size, and phase as a function of the relative humidity, for individual aerosols generated from NaCl-MA solutions, during two hygroscopic measurement cycles, which were performed first through the dehydration process, followed by a humidification process, in each cycle. In situ RMS analysis for the aerosols showed that the chemical reaction between NaCl and MA occurred rapidly in the time scale of 1 h and considerably in the aqueous phase, mostly during the first dehydration process, and the chemical reaction occurs more rapidly when MA is more enriched in the aerosols. For example, the reaction between NaCl and MA for aerosols generated from solutions of NaCl:MA = 2:1 and 1:2 occurred by 81% and 100% at RH = 42% and 45%, respectively, during the first dehydration process. The aerosols generated from the solution of NaCl:MA = 2:1 revealed single efflorescence and deliquescence transitions repeatedly during two hygroscopic cycles. The aerosols from NaCl:MA = 1:1 and 1:2 solutions showed just an efflorescence transition during the first dehydration process and no efflorescence and deliquescence transition during the hygroscopic cycles, respectively. The observed different hygroscopic behavior was due to the different contents of NaCl, MA, and monosodium malonate in the aerosols, which were monitored real-time by in situ RMS.

Progress in the Analysis of Complex Atmospheric Particles

This article presents an overview of recent advances in field and laboratory studies of atmospheric particles formed in processes of environmental air-surface interactions. The overarching goal of these studies is to advance predictive understanding of atmospheric particle composition, particle chemistry during aging, and their environmental impacts. The diversity between chemical constituents and lateral heterogeneity within individual particles adds to the chemical complexity of particles and their surfaces. Once emitted, particles undergo transformation via atmospheric aging processes that further modify their complex composition. We highlight a range of modern analytical approaches that enable multimodal chemical characterization of particles with both molecular and lateral specificity. When combined, these approaches provide a comprehensive arsenal of tools for understanding the nature of particles at air-surface interactions and their reactivity and transformations with atmospheric aging. We discuss applications of these novel approaches in recent studies and highlight additional research areas to explore the environmental effects of air-surface interactions.

Solar Absorption by Aerosol-Bound Nitrophenols Compared to Aqueous and Gaseous Nitrophenols

Nitrophenols are well-known absorbers of near-UV/blue radiation and are considered to be a component of solar-absorbing organic aerosol material commonly labeled brown carbon. Nitrophenols have been identified in a variety of phases in earth's atmosphere, including the gaseous, aqueous, and aerosol bound, and these different environments alter their UV-vis absorption spectra, most dramatically when deprotonated forming nitrophenolates. We quantify the impact of these different absorption profiles by calculating the solar power absorbed per molecule for several nitrophenols. For instance, aqueous 2,4-dinitrophenol absorption varies dramatically over the pH range of cloud droplets with pH = 5.5 solutions absorbing three times the solar power compared to pH = 3.5 solutions. We also measured the UV-vis spectra of 2-nitrophenol adsorbed on several aerosol substrates representative of mineral dust, inorganic salts, and organic aerosol and compare these spectra to gaseous and aqueous 2-nitrophenol. 2-Nitrophenol adsorbed on mineral and chloride aerosol substrates exhibits a red-shifted absorption band (∼450-650 nm) consistent with 2-nitrophenolate and absorbs twice the solar power per molecule compared to gaseous, aqueous, and organic aerosol-bound 2-nitrophenol. We also discuss how different nitrophenol absorption profiles alter important atmospheric photolysis rate constants [e.g., J(NO2) and J(O3)] by attenuating solar flux.

Measuring Mass-Based Hygroscopicity of Atmospheric Particles through in Situ Imaging

Quantifying how atmospheric particles interact with water vapor is critical for understanding the effects of aerosols on climate. We present a novel method to measure the mass-based hygroscopicity of particles while characterizing their elemental and carbon functional group compositions. Since mass-based hygroscopicity is insensitive to particle geometry, it is advantageous for probing the hygroscopic behavior of atmospheric particles, which can have irregular morphologies. Combining scanning electron microscopy with energy dispersive X-ray analysis (SEM/EDX), scanning transmission X-ray microscopy (STXM) analysis, and in situ STXM humidification experiments, this method was validated using laboratory-generated, atmospherically relevant particles. Then, the hygroscopicity and elemental composition of 15 complex atmospheric particles were analyzed by leveraging quantification of C, N, and O from STXM, and complementary elemental quantification from SEM/EDX. We found three types of hygroscopic responses, and correlated high hygroscopicity with Na and Cl content. The mixing state of 158 other particles from the sample broadly agreed with those of the humidified particles, indicating the potential to infer atmospheric hygroscopic behavior from a selected subset of particles. These methods offer unique quantitative capabilities to characterize and correlate the hygroscopicity and chemistry of individual submicrometer atmospheric particles.

Size matters in the water uptake and hygroscopic growth of atmospherically relevant multicomponent aerosol particles

Understanding the interactions of water with atmospheric aerosols is crucial for determining the size, physical state, reactivity, and climate impacts of this important component of the Earth's atmosphere. Here we show that water uptake and hygroscopic growth of multicomponent, atmospherically relevant particles can be size dependent when comparing 100 nm versus ca. 6 μm sized particles. It was determined that particles composed of ammonium sulfate with succinic acid and of a mixture of chlorides typical of the marine environment show size-dependent hygroscopic behavior. Microscopic analysis of the distribution of components within the aerosol particles show that the size dependence is due to differences in the mixing state, that is, whether particles are homogeneously mixed or phase separated, for different sized particles. This morphology-dependent hygroscopicity has consequences for heterogeneous atmospheric chemistry as well as aerosol interactions with electromagnetic radiation and clouds.

Molecular characterization of brown carbon (BrC) chromophores in secondary organic aerosol generated from photo-oxidation of toluene

BrC chromophores of toluene SOA have been identified using the HPLC–UV/Vis–ESI/HRMS platform.