Degradation of poly(ether sulfone)/polyvinylpyrrolidone membranes by sodium hypochlorite: insight from advanced electrokinetic characterizations

Using Tannic-Acid-Based Complex to Modify Polyacrylonitrile Hollow Fiber Membrane for Efficient Oil-In-Water Separation

Separating oil from water allows us to reuse both fluids for various applications, leading to a more economical process. Membrane separation has been evidenced as a cost-effective process for wastewater treatment. A hollow fiber membrane made of polyacrylonitrile (PAN) is an excellent choice for separating oil from water because of its superior chemical resistance. Its low antifouling ability, however, reduces the effectiveness of its separation. Hence, in this study, we used tannic acid (TA) and FeIII complex to modify the surface of the PAN hollow fiber membrane. To improve membrane performance, different reaction times were investigated. The results demonstrate that even when the TA-FeIII covered the pores of the PAN membrane, the water flux remained constant. However, when an emulsion was fed to the feed solution, the flux increased from 50 to 66 LMH, indicating low oil adhesion on the surface of the modified membrane. When compared to the pristine membrane, the modified membrane had superior antifouling and reusability. As a result, the hydrophilic TA-FeIII complex on PAN surface improves overall membrane performance.

Unveiling the Impacts of Sodium Hypochlorite on the Characteristics and Fouling Behaviors of Different Commercial Polyvinylidene Fluoride Hollow Fiber Membranes

Sodium hypochlorite (NaOCl) is a commonly used cleaning agent for recovering membrane performance in membrane technologies. A thorough understanding of the impacts of NaOCl exposure on membrane properties and fouling behavior is important for optimizing chemical cleaning process and extending membrane lifespan. In this study, three commercial polyvinylidene fluoride (PVDF) hollow fiber ultrafiltration membranes (SMM-1010, MEMCOR^® CS II and ZeeWeed 500) were used to systematically explore the effects of NaOCl dose and solution pH (8 and 10) on membrane properties. The results showed that membrane pores increased with exposure time prolonging, and more pores were observed at pH 8 aging condition. The amide group in the Fourier transformation infrared spectra was disappeared, while the carboxylic acid and succinimide groups were formed at pH 10 and pH 8 conditions, respectively. The hydrophilicity and pure water permeability (PWP) of SMM-1010 and MEMCOR^® CS II membranes had insignificant changes during NaOCl aging process, whereas the hydrophilicity of ZeeWeed 500 membrane slightly decreased and its PWP increased by 1.4-fold. The antifouling properties of NaOCl-aged SMM-1010 and MEMCOR^® CS II membranes were slightly improved, whereas the NaOCl-aged ZeeWeed 500 membrane showed severer flux decline with humic acid filtration. Our findings could provide guidance for practical chemical cleaning process optimization.

Characterization and biodegradation of ternary blends of lignosulfonate/synthetic zeolite/polyvinylpyrrolidone for agricultural chemistry

This study investigates novel ternary polymer blends based on polyvinylpyrrolidone (PVP) as the matrix in combination with lignosulfonate and synthetic zeolite. The blends were prepared by the casting method, and their properties were analysed by various techniques, i.e. FTIR analysis, differential scanning calorimetry and thermogravimetric analysis, including tests for water solubility and uptake, and determination of adhesion and hardness. The biodegradation of the blends in soil was also evaluated, and an experiment was conducted on plant growth (Sinapis alba). Optical microscopy showed that particles of the synthetic zeolite were relatively evenly distributed in the polymer matrix, forming random networks therein. The FTIR spectra for the blends proved that hydrogen bonding interactions had occurred between the PVP/synthetic zeolite and PVP/lignosulfonate. DSC analysis confirmed the good miscibility of the PVP and lignosulfonate. TGA results indicated that the thermal stability of the PVP was maintained. Lignosulfonate had the effect of reducing the adhesion of the blends. However, it was revealed that effect depends greatly on the presence of zeolite and the concentration of lignosulfonate. The obtained results showed that the optimal composition of the blend is 2.5 wt% of zeolite and 5 wt% of lignosulfonate into the PVP. Its water solubility and uptake was satisfactory from the perspective of handling and further utilization. A respirometric biodegradation test confirmed that the ternary blend was environmentally friendly, in addition to which a germination experiment evidenced that the lignosulfonate and synthetic zeolite promoted the root growth and development of S. alba. From these findings it was concluded that the novel ternary polymer blend was applicable as either as seed carriers (in the form of seed tapes) or as a biocompatible coating to protect seeds.

Chemical Cleaning and Membrane Aging in MBR for Textile Wastewater Treatment

Membrane bioreactors have been widely used in textile wastewater treatment. Intensive chemical cleaning is indispensable in the MBR for textile wastewater treatment due to the severe membrane fouling implied. This work investigated the aging of three different membranes, polyvinylidene fluoride (PVDF), polyether sulfone (PES), and polytetrafluoroethylene (PTFE), in the MBRs for textile wastewater treatment. Pilot-scale MBRs were operated and the used membrane was characterized. Batch chemical soaking tests were conducted to elucidate the aging properties of the membranes. The results indicated that the PVDF membrane was most liable to the chemical cleaning, and the PES and PTFE membranes were rather stable. The surface hydrophobicity of the PVDF increased in the acid aging test, and the pore size and pure water flux decreased due to the elevated hydrophobic effect; alkaline oxide aging destructed the structure of the PVDF membrane, enlarged pore size, and increased pure water flux. Chemical cleaning only altered the interfacial properties (hydrophobicity and surface zeta potential) of the PES and PTFE membranes. The fluoro-substitution and the dehydrofluorination of the PVDF, chain scission of the PES molecules, and dehydrofluorination of the PTFE were observed in aging. A chemically stable and anti-aging membrane would be of great importance in the MBR for textile wastewater treatment due to the intensive chemical cleaning applied.

Aging of PVDF and PES ultrafiltration membranes by sodium hypochlorite: Effect of solution pH

Sodium hypochlorite (NaClO) is a commonly applied cleaning agent for ultrafiltration membranes in water and wastewater treatment. Long-term exposure to NaClO might change the properties and performance of polymeric membranes, and ultimately shorten membrane lifespan. Active species in NaClO solution vary with solution pH, and the aging effects can change depending on the membrane material. In this study, the aging of polyvinylidene fluoride (PVDF) and polyethersulfone (PES) membranes by NaClO at pH 3-11 was investigated by examining variations in chemical composition, surface charge, surface morphology, mechanical strength, permeability, and retention ability. Polyvinyl pyrrolidone (PVP), which was blended in both membranes, was oxidized and dislodged due to NaClO aging at all investigated pH values, but the oxidation products and dislodgement ratio of PVP varied with solution pH. For the PVDF membrane, NaClO aging at pH 3-11 caused a moderate increase in permeability and decreased retention due to the oxidation and release of PVP. The tensile strength decreased only at pH 11 because of the defluorination of PVDF molecules. For the PES membrane, NaClO aging at all investigated pH resulted in chain scission of PES molecules, which was favored at pH 7 and 9, potentially due to the formation of free radicals. Therefore, a decrease in tensile strength and retention ability, as well as an increase in permeability, occurred in the PES membrane for NaClO aging at pH 3-11. Overall, the results can provide a basis for selecting chemical cleaning conditions for PVDF and PES membranes.

Aging retardation strategy of PVDF membranes: evaluation of free radical scavenging effect of nano-particles

ESR and spectrophotometry proved that nano-particles can effectively remove free radicals produced by NaClO, and analyzed the mechanism of delaying aging.

Influence of Sodium Hypochlorite Treatment on Pore Size Distribution of Polysulfone/Polyvinylpyrrolidone Membranes

This work was focused on the study of hypochlorite treatment on the pore size distribution of membranes. To this end, ultrafiltration membranes from a polysulfone/polyvinylpyrrolidone blend with a sponge-like structure were fabricated and exposed to hypochlorite solutions with different active chlorine concentrations for 4 h at ambient temperature. Liquid–liquid displacement and scanning electron microscopy were employed to study the limiting and surface pores, respectively. After treatment with 50 ppm hypochlorite solution at pH = 7.2, a five-fold increase in water permeance up to 1400 L/(m²·h·bar) was observed, accompanied by a 40% increase in the limiting pore sizes and almost a three-fold increase in the porosity. After 5000 ppm treatment at pH = 11.5, a 40% rise in the maximum limiting pore size and almost a two-fold increase in the porosity and permeance was observed, whereas the mean pore size was constant. Apparently, changes in the membrane structure at pH = 11.5 were connected with polyvinylpyrrolidone (PVP) degradation and wash-out, whereas at lower pH and despite lower active chlorine concentration, this process was coupled with polysulfone (PSf) destruction and removal.

How microwaves can help to study membrane ageing

This paper studies original protocols of rapid PES/PVP membrane NaOCl degradation allowing at reaching ageing states that are representative of industrial ageing. The long term objective is to propose basis for further fundamental studies aiming at the improvement of the impact of membrane ageing on behaviour in UF (fouling and cleaning mastering). The key of several protocols is the use of ageing acceleration thanks to microwave irradiation, either continuous or pulsed ones, that can be further associated (or not) with short ageing time in UF conditions. To evaluate the representativeness of obtained aged membranes, comparisons are achieved between pristine, voluntary laboratory aged membranes and an industrial membrane at the end of its service-life. Several physico-chemical analyses were used (ATR-FTIR, SEM-EDX, contact angle, SEC-HPLC). Evaluation of UF performances were made in UF of a model protein (Lysozyme, 14,300 g.mol^-1). Finally, the proof of concept is done that conditions using MW exist to reach ageing state representative of industrial ageing.

Formation mechanisms of emerging organic contaminants during on-line membrane cleaning with NaOCl in MBR

On-line chemical cleaning with sodium hypochlorite (NaOCl) is widely employed for sustaining MBR permeability, during which the inevitable contact between activated sludge and NaOCl had been shown to trigger substantial release of dissolved organic matter (DOM). Therefore, this work further explored the formation mechanisms of such DOM by looking into the respective reactions of intracellular organic matter (IOM) and cell debris in activated sludge with NaOCl. The results showed that DOM was primarily produced from the dissolution of cell wall, while IOM release was insignificant at the NaOCl concentration of 25 mg/L as Cl₂. On the basis of experimental observations, a three-step mechanism was proposed for elucidating the DOM formation from activated sludge upon NaOCl exposure: (i) NaOCl first damaged cells by perforating cellular wall, producing a considerable amount of humic-like substances and low-molecular-weight halogenated byproducts; (ii) IOM was released but rapidly degraded and humified by NaOCl, accompanied with the formation of relatively high-molecular-weight halogenated byproducts; (iii) the residual NaOCl and combined chlorine continued to react with cell wall or likely diffused into cells leading to the deactivation of DNA/enzymes. Consequently, this study offers mechanistic insights into the origination of emerging contaminants during on-line membrane cleaning of practical MBR.

Hierarchically Active Poly(vinylidene fluoride) Membrane Fabricated by In Situ Generated Zero-Valent Iron for Fouling Reduction

Sodium hypochlorite (NaClO) solution is a typical cleaning agent for membrane fouling. However, it can damage membrane chemical structures and produce toxic disinfection byproducts, which in turn reduces the membrane performance. This study focuses on the fabrication of active membranes thereby overcoming the limitations of chemical cleaning. A hierarchical active poly(vinylidene fluoride) membrane with polydopamine/polyethyleneimine (PEI) co-supported iron nanoparticle (Fe NP) catalysts was successfully constructed and denoted as a Fe-HP-membrane. The Fe-HP-membrane exhibited excellent advanced oxidation activity with maximum flux recoveries (∼85% with bovine serum albumin [BSA] and ∼95% with humic acid [HA] solutions). After the static experiment of ∼30 days, the BSA proteins and HA successfully desorbed from the membrane surface. Especially, with a trace amount of hydrogen peroxide (H₂O₂) flowing over the surface of the Fe-HP-membrane, highly exposed active sites were observed. Membrane cleaning showed that the "outside-to-in" active surfaces generated considerable amounts of ^•OH radicals at the interface of BSA or HA and the fouled membrane. As a result, the unwanted foulants were successfully removed from the membrane interface, enabling multiple use of the Fe-HP-membrane. Therefore, backwashing with a small amount of H₂O₂ (0.33 wt %) covered ∼20% of the flux. In contrary, backwashing with NaClO (1 wt %) can only achieve a flux recovery of ∼10% after six consecutive BSA filtration cycles. The Fe-HP-membrane exhibited better HA foulant removal (a flux recovery of ∼51%) after backwashing with H₂O₂ than using NaClO (a flux recovery of ∼43%). Our findings demonstrate a new platform for water treatment and regeneration of fouled membranes.

Feasibility of isolated novel facultative quorum quenching consortiums for fouling control in an AnMBR

Anaerobic membrane bioreactor (AnMBR) technology is being recognized as an appealing strategy for wastewater treatment, however, severity of membrane fouling inhibits its widespread implementations. This study engineered novel facultative quorum quenching consortiums (FQQs) coping with membrane fouling in AnMBRs with preliminary analysis for their quorum quenching (QQ) performances. Herein, Acyl-homoserine lactones (AHLs)-based quorum sensing (QS) in a lab-scale AnMBR initially revealed that N-Hexanoyl-dl-homoserine lactone (C6-HSL), N-Octanoyl-dl-homoserine lactone (C8-HSL) and N-Decanoyl-dl-homoserine lactone (C10-HSL) were the dominant AHLs in AnMBRs in this study. Three FQQs, namely, FQQ-C6, FQQ-C8 and FQQ-C10, were harvested after anaerobic screening of aerobic QQ consortiums (AeQQs) which were isolated by enrichment culture, aiming to degrade C6-HSL, C8-HSL and C10-HSL, respectively. Growth of FQQ-C6 and FQQ-C10 using AHLs as carbon source under anaerobic condition was significantly faster than those using acetate, congruously suggesting that their QQ performance will not be compromised in AnMBRs. All FQQs degraded a wide range of AHLs pinpointing their extensive QQ ability. FQQ-C6, FQQ-C8 and FQQ-C10 remarkably alleviated extracellular polymeric substances (EPS) production in a lab-scale AnMBR by 72.46%, 35.89% and 65.88%, respectively, and FQQ-C6 retarded membrane fouling of the AnMBR by 2 times. Bioinformatics analysis indicated that there was a major shift in dominant species from AeQQs to FQQs where Comamonas sp., Klebsiella sp., Stenotrophomonas sp. and Ochrobactrum sp. survived after anaerobic screening and were the majority in FQQs. High growth rate utilizing AHLs under anaerobic condition and enormous EPS retardation efficiency in FQQ-C6 and FQQ-C10 could be attributed to Comamonas sp.. These findings demonstrated that FQQs could be leveraged for QQ under anaerobic systems. We believe that this was the first work proposing a bacterial pool of facultative QQ candidates holding biotechnological promises for membrane fouling control in AnMBRs.

Effects of Hydrogen Peroxide and Sodium Hypochlorite Aging on Properties and Performance of Polyethersulfone Ultrafiltration Membrane

Chemical reaction of main polymer and additive with oxidative cleaning agents plays an important role in aging of polymeric membrane for water and wastewater treatment. As a green and powerful oxidant, hydrogen peroxide (H₂O₂) can achieve good cleaning efficacy under alkaline condition, but its influence on membrane aging was poorly understood. In this study, degradation of polyethersulfone (PES) membrane due to H₂O₂ exposure under alkaline condition (pH 9 and 11) was holistically investigated by humic acid (HA) filtration experiments and multiple membrane characterization techniques, with sodium hypochlorite (NaClO) aging examined as a comparison. Membrane permeability and HA retention rate was hardly changed by H₂O₂ aging at an exposure dose of 500 g·h/L, whereas NaClO aging led to substantial increase of membrane permeability and significant decrease of retention ability. Meanwhile, H₂O₂ aging slightly increased fouling propensity with HA filtration, while NaClO aging resulted in more serious fouling. ATR-FTIR and XPS analysis revealed much less degradation of PES and hydrophilic additive by H₂O₂ than that by NaClO, and membrane morphology and surface properties were characterized to explain the variation of filtration performance. Overall, compared with cleaning with NaClO, membrane degradation can be minimized by cleaning with H₂O₂.

Colorimetric Determination of Hypochlorite Based on the Oxidative Leaching of Gold Nanorods

Hypochlorite plays a critical role in killing microorganisms in the water. However, it can also cause cardiovascular diseases, neuron degeneration, and cancer to humans. Although traditional methods feature excellent sensitivity and reliability in detecting hypochlorite, the expensive instruments and strict determination conditions have limited their application in environmental analysis to some extent. Thus, it is necessary and urgent to propose a cheap, facile, and quick analytical assay for hypochlorite. This paper proposes a colorimetric assay for hypochlorite utilizing gold nanorods (AuNRs) as the nanoreactor and color reader. The AuNRs were acquired via a reported seed-mediated method. NaClO with strong oxidation property can cause the etching of gold from the longitudinal tips of AuNRs, which could shorten the aspect ratio of AuNRs, decrease the absorption in the UV–Vis spectrum and also induce the solution color changing from red to pale yellow. Thus, according to the solution color change and the absorbance of longitudinal surface plasmon resonance of AuNRs, we established the calibration curve of NaClO within 0.08 μM to 125 μM (∆Abs = 0.0547 + 0.004 C_NaClO, R² = 0.9631). Compared to traditional method, we obtained the conversion formula between the concentration of residual-chlorine in tap water and the concentration of hypochlorite detected by the proposed colorimetric assay, which is C_{residual-chlorine} = 0.24 C_NaClO. Finally, the real application of the colorimetric assay in tap water was successfully performed, and the accuracy of the colorimetric method can reach from −6.78% to +8.53%.

Unveiling the Susceptibility of Functional Groups of Poly(ether sulfone)/Polyvinylpyrrolidone Membranes to NaOCl: A Two-Dimensional Correlation Spectroscopic Study

A clear understanding of membrane aging process is essential for the optimization of chemical cleaning in membrane-based facilities. In this study, two-dimensional (2D) Fourier transformation infrared (FTIR) correlation spectroscopy (CoS) analysis was first used to decipher the sequential order of functional group changes of NaOCl-aged poly(ether sulfone)/polyvinylpyrrolidone (PES/PVP) membranes. The synchronous maps showed 12 major autopeaks in total. Based on the asynchronous maps, a similar aging sequence of membrane groups was clearly identified at three pHs (i.e., 6, 8, and 10): 1463, 1440, and 1410 (cyclic C-H structures) > 1662 (amide groups) > 1700 (succinimide groups) > 1320, 1292 (S═O asymmetric) > 1486, 1580 (aromatic structures) > 1241 (aromatic ether bands) > 1105, 1150 cm^-1 (O═S═O symmetric). Among them, membrane chlorination occurred at 1241, 1410, and 1440 cm^-1. Moreover, the initial degradation of PVP and the subsequent transformation of PES could be highly responsible for the increased water permeability and the enlargement of membrane pores, respectively, both leading to serious fouling with humic acid filtration. In summary, the 2D-FTIR-CoS analysis is a powerful approach to reveal the interaction mechanisms of NaOCl-membrane and could be also useful to probe the process of membrane fouling and chemical cleaning.

Pancreatic islet macroencapsulation using microwell porous membranes

Allogeneic islet transplantation into the liver in combination with immune suppressive drug therapy is widely regarded as a potential cure for type 1 diabetes. However, the intrahepatic system is suboptimal as the concentration of drugs and nutrients there is higher compared to pancreas, which negatively affects islet function. Islet encapsulation within semipermeable membranes is a promising strategy that allows for the islet transplantation outside the suboptimal liver portal system and provides environment, where islets can perform their endocrine function. In this study, we develop a macroencapsulation device based on thin microwell membranes. The islets are seeded in separate microwells to avoid aggregation, whereas the membrane porosity is tailored to achieve sufficient transport of nutrients, glucose and insulin. The non-degradable, microwell membranes are composed of poly (ether sulfone)/polyvinylpyrrolidone and manufactured via phase separation micro molding. Our results show that the device prevents aggregation and preserves the islet’s native morphology. Moreover, the encapsulated islets maintain their glucose responsiveness and function after 7 days of culture (stimulation index above 2 for high glucose stimulation), demonstrating the potential of this novel device for islet transplantation.

Irreversible Damage of Polymer Membranes During Attenuated Total Reflection Infrared Analysis

Analyzing polymer membranes by attenuated total reflection infrared spectroscopy (ATR-IR) can lead to irreversible damage to the material and induces systematic errors in the data. Attenuated total reflection infrared spectroscopy is a common tool for analyzing the surface of polymer membranes. In order to provide sufficient contact between the membrane and the internal reflection element (i.e., the ATR crystal), pressure is applied via a metal stamp. This procedure, however, can lead to mechanical damage. In this work, we study this damage using the example of a polyethersulfone (PES) membrane for water filtration and we show how the damage can be avoided. Attenuated total reflection infrared spectroscopy, laser-scanning microscopy (LSM), and atomic force microscopy (AFM) are employed to understand the mechanically-induced phenomena at the molecular and macroscopic scales. The data reveal that the mechanical impact does not only result in a compressed membrane structure with smaller pores, but it also leads to deformations at the molecular level. Moreover, in light of the mechanical damage, a detailed analysis of the PES IR spectrum indicates that several previous vibrational assignments of peaks may be incorrect and that many published results may be biased and should be revisited.

Ultraviolet photo-oxidation of polyvinylpyrrolidone (PVP) coatings on gold nanoparticles

Polymeric coatings are commonly applied to impart functionality and colloidal stability to engineered nanoparticles. In natural environments, transformations of the coating can modify the particle transport behavior, but the mechanisms and outcomes of these transformations have not yet been thoroughly evaluated. This study investigates the photo-transformations of polyvinylpyrrolidone (PVP) coatings on gold nanoparticles (AuNPs) under ultraviolet (UV) irradiation, representing light exposure in surface waters or other sunlit environments, and the impact on the AuNP colloidal stability. Multiple orthogonal characterization methods were applied to interrogate UV-induced transformations and their consequences. Rapid oxidation of the PVP coating occurred upon UV exposure. The transformed PVP largely persisted on the AuNP surface, albeit in a collapsed polymer layer around the AuNP surface. This transformation resulted in drastically diminished colloidal stability of the AuNPs, consistent with loss of steric stabilization. While the residual coating modified the interaction of the AuNPs with calcium counterions, it did not prevent subsequent stabilization by humic acid. This study demonstrates the importance of both chemical and physical coating transformations on nanoparticles, and hence the need for orthogonal and complementary characterization methods to fully characterize the coating transformations. Finally, the specific transformations of the PVP-coated AuNPs investigated here are discussed more broadly with respect to generalizability to other polymer-coated NPs and the implications for their fate in sunlit or other reactive environments.

Improved chlorine tolerance of a polyvinyl pyrrolidone-polysulfone membrane enabled by carboxylated carbon nanotubes

Chemical cleaning of membranes may be limited by the tolerance of some polymeric membranes to chlorine. In this work we show that modification of a polyvinyl pyrrolidone-polysulfone (PVP-PSF) membrane with carboxylated carbon nanotubes (CNTs) leads to greater chlorine tolerance of the membrane along with smoothing the surface roughness and improving some membrane properties including permeability, hydrophilicity and antifouling ability. In comparison with PVP-PSF membrane, incorporating carboxylated CNTs reduced the release of organic matter from the membrane and caused less decrease in hydrophilicity, permeability and BSA rejection. After chlorine treatment of a conventional PVP-PSF membrane, an infrared absorbance peak around 1670 cm^-1, representing the vibration of the amide bond in the PVP, decreased significantly and two smaller peaks at around 1725 and 1775 cm^-1 were observed. The percentage of C-Cl (2p) in the PVP-PSF membrane was about 2.8 times greater than that of the carboxylated CNT-composite PVP-PSF (CNT-PVP-PSF) membrane after chlorine exposure, suggesting greater chlorine tolerance of CNT-PVP-PSF membrane. In comparison with PVP-PSF membrane, the formation of toxic chlorinated byproducts during chlorination of organic matter released from CNT-PVP-PSF membrane was much lower. The improvement of tolerance to chlorine is attributed to stabilization of the polymer through hydrogen bonding between polymer and carboxylated CNTs.

Multi-stage Mass Spectrometry of Poly(vinyl pyrrolidone) and Its Vinyl Succinimide Copolymer Formed upon Exposure to Sodium Hypochlorite

The degradation routes of poly(vinyl pyrrolidone) (PVP) exposed to sodium hypochlorite (bleach) have been previously investigated using chemical analyses such as infrared spectroscopy. So far, no reports have proposed mass spectrometry (MS) as an alternative tool despite its capability to provide molecular and structural information using its single stage electrospray (ESI) or matrix assisted laser desorption ionization (MALDI) and multi stage (MS ⁿ ) configurations, respectively. The present study thus reports on the characterization of PVP after its exposure to bleach by high resolution MALDI spiralTOF-MS and Kendrick mass defect analysis providing clues as to the formation of a vinyl pyrrolidone/vinyl succinimide copolymeric degradation product. A thorough investigation of the fragmentation pathways of PVP adducted with sodium and proton allows one main route to be described-namely the release of the pyrrolidone pendant group in a charge remote and charge driven mechanism, respectively. Extrapolating this fragmentation pathway, the oxidation of vinyl pyrrolidone into vinyl succinimide hypothesized from the single stage MS is validated by the detection of an alternative succinimide neutral loss in lieu of the pyrrolidone release in the ESI-MS ⁿ spectra of the aged PVP sample. It constitutes an example of application of multi-stage mass spectrometry for the characterization of the degradation of polymeric samples at a molecular level.

Microbial responses to membrane cleaning using sodium hypochlorite in membrane bioreactors: Cell integrity, key enzymes and intracellular reactive oxygen species

Sodium hypochlorite (NaClO) is a commonly used reagent for membrane cleaning in membrane bioreactors (MBRs), while it, being a kind of disinfectant (oxidant), may impair viability of microbes or even totally inactivate them upon its diffusion into mixed liquor during membrane cleaning. In this study, we systematically examine the effects of NaClO on microorganisms in terms of microbial cell integrity, metabolism behaviours (key enzymes), and intracellular reactive oxygen species (ROS) under various NaClO concentrations. Different proportions of microbial cells in activated sludge were damaged within several minutes dependent on NaClO dosages (5-50 mg/g-SS), and correspondingly organic matters were released to bulk solution. Inhibition of key enzymes involved in organic matter biodegradation, nitrification and denitrification was observed in the presence of NaClO above 1 mg/g-SS, and thus organic matter and nitrogen removal efficiencies were decreased. It was also demonstrated that intracellular ROS production was increased with the NaClO dosage higher than 1 mg/g-SS, which likely induced further damage to microbial cells.