Enhanced Colloidal Stability of CeO2 Nanoparticles by Ferrous Ions: Adsorption, Redox Reaction, and Surface Precipitation

Influence on the release of arsenic and tungsten from sediment, and effect on other heavy metals and microorganisms by ceria nanoparticle capping

In this study, ceria nanoparticle (CNP) was used as a capping agent to investigate the efficiency and mechanism of simultaneously controlling the release of sediment internal Arsenic (As) and tungsten (W). The results of incubation experiment demonstrated that CNP capping reduced soluble As and W by 81.80% and 97.97% in overlying water, respectively; soluble As and W by 65.64% and 60.13% in pore water, respectively; and labile As and W in sediment by 45.20% and 53.20%, respectively. The main mechanism of CNP controlling sediment internal As and W was through adsorption via ligand exchange and inner-sphere complexation, as determined through adsorption experiments, XPS and FIRT spectra analysis. Besides, CNP also acted as an oxidant, facilitating the oxidation of AsⅢ to AsV and thereby enhancing the adsorption of soluble As. Additionally, sediment As and W fractions experiments demonstrated that the immobilization of As and W with CNP treatment via transforming mobile to stable fractions was another mechanism inhibiting sediment As and W release. The obtained significant positive correlation between soluble As/W and Fe/Mn, labile As/W and Fe/Mn indicated that iron (Fe) and manganese (Mn) oxidation, influenced by CNP, serve as additional mechanisms. Moreover, Fe redox plays a crucial role in controlling internal As and W, while Mn redox plays a more significant role in controlling As compared to W. Meanwhile, CNP capping effectively prevented the release of As and W by reducing the activity of microorganisms that degrade Fe-bound As and W and reduced the release risk of V, Cr, Co, Ni, and Zn from sediments. Overall, this study proved that CNP was a suitable capping agent for simultaneously controlling the release of As and W from sediment.

Synergistic Effects of Organic Ligands and Visible Light on the Reductive Dissolution of CeO2 Nanoparticles: Mechanisms and Implications for the Transformation in Plant Surroundings

Cerium oxide (CeO2) nanoparticles are one of the most important engineered nanomaterials with demonstrated applications in industry. Although numerous studies have reported the plant uptake of CeO2, its fate and transformation pathways and mechanisms in plant-related conditions are still not well understood. This study investigated the stability of CeO2 in the presence of organic ligands (maleic and citric acid) and light irradiation. For the first time, we found that organic ligands and visible light had a synergistic effect on the reductive dissolution of CeO2 with up to 30% Ce releases after 3 days, which is the highest release reported so far under environmental conditions. Moreover, the photoinduced dissolution of CeO2 in the presence of citrate was much higher than that in maleate, which are adsorbed on the surface of CeO2 through inner-sphere and outer-sphere complexation, respectively. A novel ligand-dependent photodissolution mechanism was proposed and highlighted: upon electron-hole separation under light irradiation, the inner-sphere complexed citrate is more capable of consuming the hole, prolonging the life of electrons for the reduction of Ce(IV) to Ce(III). Finally, reoxidation of Ce(III) by oxygen was observed and discussed. This comprehensive work advances our knowledge of the fate and transformation of CeO2 in plant surroundings.

Dissolution Behaviour of Metal-Oxide Nanomaterials in Various Biological Media

Toxicological effects of metal-oxide-engineered nanomaterials (ENMs) are closely related to their distinct physical-chemical properties, especially solubility and surface reactivity. The present study used five metal-oxide ENMs (ZnO, MnO₂, CeO₂, Al₂O₃, and Fe₂O₃) to investigate how various biologically relevant media influenced dissolution behaviour. In both water and cell culture medium (DMEM), the metal-oxide ENMs were more soluble than their bulk analogues, with the exception that bulk-MnO₂ was slightly more soluble in water than nano-MnO₂ and Fe₂O₃ displayed negligible solubility across all tested media (regardless of particle size). Lowering the initial concentration (10 mg/L vs. 100 mg/L) significantly increased the relative solubility (% of total concentration) of nano-ZnO and nano-MnO₂ in both water and DMEM. Nano-Al₂O₃ and nano-CeO₂ were impacted differently by the two media (significantly higher % solubility at 10 mg/L in DMEM vs. water). Further evaluation of simulated interstitial lung fluid (Gamble's solution) and phagolysosomal simulant fluid (PSF) showed that the selection of aqueous media significantly affected agglomeration and dissolution behaviour. The solubility of all investigated ENMs was significantly higher in DMEM (pH = 7.4) compared to Gamble's (pH 7.4), attributable to the presence of amino acids and proteins in DMEM. All ENMs showed low solubility in Gamble's (pH = 7.4) compared with PSF (pH = 4.5), attributable to the difference in pH. These observations are relevant to nanotoxicology as increased nanomaterial solubility also affects toxicity. The results demonstrated that, for the purpose of grouping and read-across efforts, the dissolution behaviour of metal-oxide ENMs should be evaluated using aqueous media representative of the exposure pathway being considered.

Exogenous iron alters uptake and translocation of CuO nanoparticles in soil-rice system: A life cycle study

The abundant iron in farmland soil may affect the environmental fate of metal-based nanoparticles (MNPs). In this study, the effect of FeSO4 and nano-zero-valent iron (nZVI) as exogenous iron on the uptake and translocation of CuO nanoparticles (NPs) in soil-rice system was performed in a life cycle study. The results show that exogenous iron basically elevated the soil pH and electrical conductivity but lowered the redox potential. Moreover, the Cu bioavailability in soil was significantly increased by 86-269% with exogenous iron at the tillering stage, while was reduced by 15-45% with medium and high concentrations of Fe(II) at the maturation stage. Meanwhile, the addition of exogenous iron resolved the unfilling of grains caused by CuO NPs. Notably, except for highest Fe(II) treatment, both Fe(II) and nZVI reduced Cu accumulation from 31% to 84% in roots and leaves due to more iron plaque. Especially, medium Fe(II) level markedly decreased the Cu content in the brown rice. μ-XRF analysis suggests that high intensity of Cu was primarily located in the rice hull and embryo under Fe(II) treatment. The reduction of CuO NPs to Cu2O caused by Fe(II) can explain the positive effect of exogenous iron on controlling the environmental risk of MNPs.

Deciphering the effects of CeO2 nanoparticles on Escherichia coli in the presence of ferrous and sulfide ions: Physicochemical transformation-induced toxicity and detoxification mechanisms

The physicochemical transformations as well as the redox reaction-induced toxicity changes of ceria nanoparticles (CeO₂ NPs) in reducing conditions is extremely lacking. Herein, the behaviors, chemical modifications and toxicity of CeO₂ NPs in the presence of reduction-active ions (namely Fe²⁺ and S^2-) were investigated, with a particular emphasis on the cytotoxicity mechanism associated with their physicochemical transformations. The presence of Fe²⁺ and S^2- differently altered the surface properties and toxicity of CeO₂ NPs. Redox reactions with Fe²⁺ led to form small aggregates, boosted the reduction of Ce^IVO₂ and enhanced dissolved Ce³⁺ concentration. Moreover, CeO₂ NPs possessed a high affinity for Escherichia coli (E. coli) and induced the generation of •OH abiotically after reaction with Fe²⁺, provoking serious disruption of cell membranes and causing high toxicity to E. coli. In contrast, the amending of S^2- protected E. coli from direct contact with CeO₂ NPs by creating new Ce₂S₃ precipitated on the surface, accelerating the aggregation of NPs and reducing the concentration of dissolved Ce³⁺. This study suggested that the chemical interactions between the reactive surfaces of CeO₂ and reduction-active ions highly determined the stability and cytotoxicity of CeO₂ NPs, which provides fundamental insights into the environmental risks of CeO₂ NPs.

Surface Properties and Environmental Transformations Controlling the Bioaccumulation and Toxicity of Cerium Oxide Nanoparticles: A Critical Review

Increasing production and utilization of cerium oxide nanoparticles (CNPs) in recent years have raised wide concerns about their toxicity. Numerous studies have been conducted to reveal the toxicity of CNPs, but the results are sometimes contradictory. In this review, the most important factors in mediating CNPs toxicity are discussed, including (1) the roles of physicochemical properties (size, morphology, agglomeration condition, surface charge, coating and surface valence state) on CNPs toxicity; (2) the phase transfer and transformation process of CNPs in various aqueous, terrestrial, and airborne environments; and (3) reductive dissolution of CNPs core and their chemical reactions with phosphate, sulfate/S^2-, and ferrous ions. The physicochemical properties play key roles in the interactions of CNPs with organisms and consequently their environmental transformations, reactivity and toxicity assessment. Also, the speciation transformations of CNPs caused by reactions with (in)organic ligands in both environmental and biological systems would further alter their fate, transport, and toxicity potential. Thus, the toxicity mechanisms are proposed based on the physical damage of direct adsorption of CNPs onto the cell membrane and chemical inhibition (including oxidative stress and interaction of CNPs with biomacromolecules). Finally, the current knowledge gaps and further research needs in identifying the toxicological risk factors of CNPs under realistic environmental conditions are highlighted, which might improve predictions about their potential environmental influences. This review aims to provide new insights into cost-effectiveness of control options and management practices to prevent environmental risks from CNPs exposure.

Fates of Au, Ag, ZnO, and CeO2 Nanoparticles in Simulated Gastric Fluid Studied using Single-Particle-Inductively Coupled Plasma-Mass Spectrometry

The increasing use of engineered nanoparticles (ENPs) in many industries has generated significant research interest regarding their impact on the environment and human health. The major routes of ENPs to enter the human body are inhalation, skin contact, and ingestion. Following ingestion, ENPs have a long contact time in the human stomach. Hence, it is essential to know the fate of the ENPs under gastric conditions. This study aims to investigate the fate of the widely used nanoparticles Ag-NP, Au-NP, CeO2-NP, and ZnO-NP in simulated gastric fluid (SGF) under different conditions through the application of single-particle inductively coupled plasma-mass spectrometry (SP-ICP-MS). The resulting analytical methods have size detection limits for Ag-NP, Au-NP, ZnO-NP, and CeO2-NP from 15 to 35 nm, and the particle concentration detection limit is 135 particles/mL. Metal ions corresponding to the ENPs of interest were detected simultaneously with detection limits from 0.02 to 0.1 μg/L. The results showed that ZnO-NPs dissolved completely and rapidly in SGF, whereas Au-NPs and CeO2-NPs showed apparent aggregation and did not dissolve significantly. Both aggregation and dissolution were observed in Ag-NP samples following exposure to SGF. The size distributions and concentrations of ENPs were affected by the original ENP concentration, ENP size, the contact time in SGF, and temperature. This work represents a significant advancement in the understanding of ENP characteristics under gastric conditions.

Cerium doped magnetite nanoparticles for highly sensitive detection of metronidazole via chemiluminescence assay

Cerium doped magnetite nanoparticle (CDM) was synthesized via a co-precipitation method and used as the co-reactant of luminol-K₃Fe(CN)₆ chemiluminescent system. The physical-chemical features of CDM were studied by XPS, XRD, HRTEM, FESEM, VSM, BET, and FTIR analyses. This simple and highly sensitive nanoprobe enabled the determination of minor concentrations of metronidazole (MNZ). Owing to the quenching efficacy of MNZ in the studied chemiluminescence system, a linear range of 3.47 × 10^-6-9.37 × 10^-5 mol/L was obtained with a limit of detection of 3.91 × 10^-7 mol/L. This biosensor was used for MNZ detection in human serum samples, which was highly efficient. The outcomes of this study give credit to the proposed biosensor to be applied for detection of MNZ in biological samples.

Citric acid enhances Ce uptake and accumulation in rice seedlings exposed to CeO2 nanoparticles and iron plaque attenuates the enhancement

To assess the role of citric acid, as a typical low-molecular-weight organic acid from root exudates, on cerium (Ce) uptake, accumulation and translocation in rice seedlings (Oryza sativa L.) exposed to two CeO₂ nanoparticles (NPs) (14 nm and 25 nm). A hydroponic experiment was performed under two citric acid levels (0.01 and 0.04 mmol L^-1) combined with iron plaque presence. Citric acid significantly enhanced surface-Ce, root-Ce and shoot-Ce accumulation, irrespective of NPs size and iron plaque presence. The increased surface-Ce was associated with the promoted interactive attraction between NPs and root surface, and the enhanced NPs dissolution. Surface-Ce (containing crystalline and amorphous fractions of iron plaque) accumulation increased with the increase of citric acid concentrations. However, the enhancement influence of 0.01 mmol L^-1 citric acid on root-Ce, shoot-Ce accumulations, rice-Ce distribution and TF_root-shoot was more remarkable than citric acid (0.04 mmol L^-1), which suggested higher food security risk for human health with environment-level citric acid. Iron plaque presence attenuated the enhancement effect of citric acid on rice-Ce accumulation and distribution (containing surface-Ce, root-Ce and shoot-Ce) due to the reduced attractive interaction between NPs and root surface from the effect of Fe²⁺ being dissolved by iron plaque. Above effect of citric acid and iron plaque was more remarkable in 25 nm NP than 14 nm NP.

Hierarchically structured ternary heterojunctions based on Ce3+/ Ce4+ modified Fe3O4 nanoparticles anchored onto graphene oxide sheets as magnetic visible-light-active photocatalysts for decontamination of oxytetracycline

The main prerequisite of an active visible-light-driven photocatalyst is to effectively utilize the visible light to induce electron-hole (e^-/h⁺) pairs of expanded lifetime. To this end, for the first time, the ternary heterojunctions of CeO₂/Fe₃O₄ /Graphene oxide and Ce³⁺/ Fe₃O₄ /Graphene oxide (CeO₂/Fe₃O₄/GO and Fe_2.8Ce_0.2O₄/GO) were prepared via facile ultrasonic-assisted procedures and employed for destruction of oxytetracycline (OTC) under visible light irradiation. The changes in the relative crystal structure, morphology, atomic and surface functional group composition, magnetic, and optic properties of magnetite were uncovered by various techniques. The substantial degradation and mineralization of OTC via visible light/Fe_2.8Ce_0.2O₄/GO system were thoroughly discussed in terms of narrowed band gap energy, the principal function of Ce³⁺/Ce⁴⁺ and Fe²⁺/Fe³⁺ redox pairs and GO platelets, enhanced charge separation and transfer, and enlarged active surface area. Furthermore, the performance of visible light/Fe_2.8Ce_0.2O₄/GO system was evaluated for treating real wastewater and its efficiency was investigated using a number of enhancers and scavengers. Finally, the generated byproducts in the course of photodegradation were determined and the oxidation pathway, photocatalytic kinetics, and plausible mechanism were proposed. The results confirmed that the introduced Ce ions and graphene oxide sheets boost the photo-catalytic efficiency of magnetite for photodegradation of OTC.

Iron plaque reduces cerium uptake and translocation in rice seedlings (Oryza sativa L.) exposed to CeO2 nanoparticles with different sizes

This study aims to assess the role of iron plaque (IP) on cerium (Ce) uptake and translocation by rice after CeO₂ nanoparticles (NPs) exposure over a 4 days period. A hydroponic experiment was performed under two IP levels (low and high) combined with two CeO₂ NPs size (14 nm and 25 nm). It was found that CeO₂ NPs as the main form was absorbed by rice due to limited NPs dissolution in hydroponic solution. IP significantly reduced surface-Ce, root-Ce and shoot-Ce accumulation, irrespective of CeO₂ NPs sizes. The reduced uptake of Ce was more obvious in NP₂₅ than NP₁₄. Ce accumulations decreased with increasing IP amounts. In IP treatments, the interactive attraction between NPs and root surface was weakened through the enhancement of hydrodynamic diameters and the reduction of ζ-potential of CeO₂ NPs in solution, as well as the reduction of |ζ| values of rice root, which reduced the Ce bioaccumulation in rice. PCA indicated the negative correlation between surface-Ce (IP-C-Ce and IP-A-Ce) and NPs size, and between shoot-Ce/root-Ce and IP-Fe/tissue-Fe. IP also decreased Ce translocation from root to shoot. A full life study indicated the reduction effect of IP on surface-Ce, root-Ce, shoot-Ce and grain-Ce accumulations. These findings are significant as they imply that the IP formation is a promising approach for preventing Ce accumulation in rice, which would regulate Ce uptake by rice in the following growth stages and decrease the health risk of CeO₂ NPs exposure in agricultural environment.

Antioxidant activity of cerium dioxide nanoparticles and nanorods in scavenging hydroxyl radicals

Cerium oxide nanoparticles (CeNPs) have been shown to exhibit antioxidant capabilities, but their efficiency in scavenging reactive oxygen species (ROS) and the underlying mechanisms are not yet well understood. In this study, cerium dioxide nanoparticles (CeNPs) and nanorods (CeNRs) were found to exhibit much stronger scavenging activity than ·OH generation in phosphate buffered saline (PBS) and surrogate lung fluid (SLF). The larger surface area and higher defect density of CeNRs may lead to higher ·OH scavenging activity than for CeNPs. These insights are important to understand the redox activity of cerium nanomaterials and provide clues to the role of CeNPs in biological and environmental processes.

Iron Plaque: A Barrier Layer to the Uptake and Translocation of Copper Oxide Nanoparticles by Rice Plants

The waterlogging environment generally results in the deposition of iron plaque on plant roots, which may impact the fate of metal-based nanoparticles. Here, we investigated the influence of iron plaque on the uptake, translocation, and transformation of copper oxide nanoparticles (CuO NPs) in rice plants. The results show that the presence of iron plaque dramatically reduced the Cu contents in roots and shoots by 89% and 78% of those without iron plaque under 100 mg/L CuO NP treatment. Meanwhile, the Cu accumulation in plants was negatively related to the amount of iron plaque. X-ray absorption near edge structure (XANES) analysis demonstrated lower percentage of CuO but higher proportion of Cu(I) in shoots exposed to CuO NPs with the formation of iron plaque. Furthermore, micro X-ray fluorescence (μ-XRF) combined with μ-XANES revealed that the iron plaque in the root epidermis and exodermis consisted of goethite and ferrihydrite, which hindered the uptake of CuO NPs by roots. However, a few CuO NPs were still absorbed by roots via root hairs or lateral roots, and further translocated to shoots. But eventually, more than 90% of total Cu(II) was reduced to Cu(I)-cysteine and Cu₂O in leaf veins of rice plants with iron plaque.

Detection of nanoparticles in Dutch surface waters

Nano-enabled consumer products are a likely source of nanoparticles in the environment and a number of studies have shown the release of nanoparticles from commercial products. Predicted environmental concentrations have been calculated but there is a need for real measurement data to validate these calculations. However, the detection of engineered nanoparticles in environmental matrices is challenging because of the low predicted environmental concentrations which may be in the ng/L range. In this study nanosized Ag, CeO₂ and TiO₂ have been measured in multiple surface water samples collected along the rivers Meuse and IJssel in the Netherlands using single-particle ICP-MS as measurement technique. Validation of the analytical method showed its capability to quantitatively determine nanoparticles at low concentrations. Concentration mass detection limits for Ag, CeO₂ and TiO₂ were 0.1ng/L, 0.05ng/L and 10ng/L respectively. Size detection limits for Ag, CeO₂ and TiO₂ were 14, 10 and 100nm. The results of the study confirm the presence of nano-sized Ag and CeO₂ particles and micro-sized TiO₂ particles in these surface waters. n-Ag was present in all samples in concentrations ranging from 0.3 to 2.5ng/L with an average concentration of 0.8ng/L and an average particle size of 15nm. n-CeO₂ was found in all samples with concentrations ranging from 0.4 to 5.2ng/L with an average concentration of 2.7ng/L and an average particle size of 19nm. Finally, μ-TiO₂ was found in all samples with a concentration ranging from 0.2 to 8.1μg/L with an average concentration of 3.1μg/L and an average particle size of 300nm. The particle sizes that were found are comparable with the particle sizes that are used in nanomaterial applications and consumer products. The nanoparticle concentrations confirm the predicted environmental concentrations values in water for all three nanoparticles.

The pH dependent surface charging and points of zero charge. VII. Update

The pristine points of zero charge (PZC) and isoelectric points (IEP) of metal oxides and IEP of other materials from the recent literature, and a few older results (overlooked in previous searches) are summarized. This study is an update of the previous compilations by the same author [Surface Charging and Points of Zero Charge, CRC, Boca Raton, 2009; J. Colloid Interface Sci. 337 (2009) 439; 353 (2011) 1; 426 (2014) 209]. The field has been very active, but most PZC and IEP are reported for materials, which are very well-documented already (silica, alumina, titania, iron oxides). IEP of (nominally) Gd₂O₃, NaTaO₃, and SrTiO₃ have been reported in the recent literature. Their IEP were not reported in older studies.

Physiological and biochemical responses of sunflower (Helianthus annuus L.) exposed to nano-CeO2 and excess boron: Modulation of boron phytotoxicity

Little is known about the interaction of nanoparticles (NPs) with soil constituents and their effects in plants. Boron (B), an essential micronutrient that reduces crop production at both deficiency and excess, has not been investigated with respect to its interaction with cerium oxide NPs (nano-CeO₂). Considering conflicting results on the nano-CeO₂ toxicity and protective role as antioxidant, their possible modulation on B toxicity in sunflower (Helianthus annuus L.) was investigated. Sunflower was cultivated for 30 days in garden pots containing original or B-spiked soil amended with nano-CeO₂ at 0-800 mg kg^-1. At harvest, Ce and B concentrations in tissues, biomass, and activities of stress enzymes in leaves were determined. Results showed that in the original soil, Ce accumulated mainly in roots, with little translocation to stems and leaves, while reduced root Ce was observed in plants from B-spiked soil. In the original soil, higher levels of nano-CeO₂ reduced plant B concentration. Although morphological effects were not visible, changes in biomass and oxidative stress response were observed. Sunflower leaves from B-spiked soil showed visible symptoms of B toxicity, such as necrosis and chlorosis in old leaves, as well as an increase of superoxide dismutase (SOD) activity. However, at high nano-CeO₂ level, SOD activity decreased reaching values similar to that of the control. This study has shown that nano-CeO₂ reduced both the B nutritional status of sunflower in original soil and the B phytotoxicity in B-spiked soil.

Lessons learned: Are engineered nanomaterials toxic to terrestrial plants?

The expansion of nanotechnology and its ubiquitous applications has fostered unavoidable interaction between engineered nanomaterials (ENMs) and plants. Recent research has shown ambiguous results with regard to the impact of ENMs in plants. On one hand, there are reports that show hazardous effects, while on the other hand, some reports highlight positive effects. This uncertainty whether the ENMs are primarily hazardous or whether they have a potential for propitious impact on plants, has raised questions in the scientific community. In this review, we tried to demystify this ambiguity by citing various exposure studies of different ENMs (nano-Ag, nano-Au, nano-Si, nano-CeO2, nano-TiO2, nano-CuO, nano-ZnO, and CNTs, among others) and their effects on various groups of plant families. After scrutinizing the most recent literature, it seems that the divergence in the research results may be possibly attributed to multiple factors such as ENM properties, plant species, soil dynamics, and soil microbial community. The analysis of the literature also suggests that there is a knowledge gap on the effects of ENMs towards changes in color, texture, shape, and nutritional aspects on ENM exposed plants.

Heterogeneous Nucleation and Growth of Nanoparticles at Environmental Interfaces

Mineral nucleation is a phase transformation of aqueous components to solids with an accompanying creation of new surfaces. In this evolutional, yet elusive, process, nuclei often form at environmental interfaces, which provide remarkably reactive sites for heterogeneous nucleation and growth. Naturally occurring nucleation processes significantly contribute to the biogeochemical cycles of important components in the Earth's crust, such as iron and manganese oxide minerals and calcium carbonate. However, in recent decades, these cycles have been significantly altered by anthropogenic activities, which affect the aqueous chemistry and equilibrium of both surface and subsurface systems. These alterations can trigger the dissolution of existing minerals and formation of new nanoparticles (i.e., nucleation and growth) and consequently change the porosity and permeability of geomedia in subsurface environments. Newly formed nanoparticles can also actively interact with components in natural and engineered aquatic systems, including those posing a significant hazard such as arsenic. These interactions can bilaterally influence the fate and transport of both newly formed nanoparticles and aqueous components. Due to their importance in natural and engineered processes, heterogeneous nucleation at environmental interfaces has started to receive more attention. However, a lack of time-resolved in situ analyses makes the evaluation of heterogeneous nucleation challenging because the physicochemical properties of both the nuclei and surfaces significantly and dynamically change with time and aqueous chemistry. This Account reviews our in situ kinetic studies of the heterogeneous nucleation and growth behaviors of iron(III) (hydr)oxide, calcium carbonate, and manganese (hydr)oxide minerals in aqueous systems. In particular, we utilized simultaneous small-angle and grazing incidence small-angle X-ray scattering (SAXS/GISAXS) to investigate in situ and in real-time the effects of water chemistry and substrate identity on heterogeneously and homogeneously formed nanoscale precipitate size dimensions and total particle volume. Using this technique, we also provided a new platform for quantitatively comparing between heterogeneous and homogeneous nucleation and growth of nanoparticles and obtaining undiscovered interfacial energies between nuclei and surfaces. In addition, nanoscale surface characterization tools, such as in situ atomic force microscopy (AFM), were utilized to support and complement our findings. With these powerful nanoscale tools, we systematically evaluated the influences of environmentally abundant (oxy)anions and cations and the properties of environmental surfaces, such as surface charge and hydrophobicity. The findings, significantly enhanced by in situ observations, can lead to a more accurate prediction of the behaviors of nanoparticles in the environment and enable better control of the physicochemical properties of nanoparticles in engineered systems, such as catalytic reactions and energy storage.

Biofilms Versus Activated Sludge: Considerations in Metal and Metal Oxide Nanoparticle Removal from Wastewater

The increasing application of metal and metal oxide nanoparticles [Me(O)NPs] in consumer products has led to a growth in concentration of these nanoparticles in wastewater as emerging contaminants. This may pose a threat to ecological communities (e.g., biological nutrient removal units) within treatment plants and those subject to wastewater effluents. Here, the toxicity, fate, and process implications of Me(O)NPs within wastewater treatment, specifically during activated sludge processing and biofilm systems are reviewed and compared. Research showed activated sludge achieves high removal rate of Me(O)NPs by the formation of aggregates through adsorption. However, recent literature reveals evidence that inhibition is likely for nutrient removal capabilities such as nitrification. Biofilm systems were much less studied, but show potential to resist Me(O)NP inhibition and achieve removal through possible retention by sorption. Implicating factors during bacteria-Me(O)NP interactions such as aggregation, surface functionalization, and the presence of organics are summarized. At current modeled levels, neither activated sludge nor biofilm systems can achieve complete removal of Me(O)NPs, thus allowing for long-term environmental exposure of diverse biological communities to Me(O)NPs in streams receiving wastewater effluents. Future research directions are identified throughout in order to minimize the impact of these nanoparticles released.

Tuning porous nanostructures of MnCo2O4 for application in supercapacitors and catalysis

A scalable and facile synthesis of MnCo₂O₄ hierarchical microstructures for applications in supercapacitors and reduction catalysis.