Sulfur ligand substitution at the nickel(II) sites of cubane-type and cubanoid NiFe3S4 clusters relevant to the C-clusters of carbon monoxide dehydrogenase

Heterobimetallic NiFe Complex for Photocatalytic CO2 Reduction: United Efforts of NiFe Dual Sites

Catalytic CO2 reduction poses a significant challenge for the conversion of CO2 into chemicals and fuels. Ni-Fe carbon monoxide dehydrogenase ([NiFe]-CODH) effectively mediates the reversible conversion of CO2 and CO at a nearly thermodynamic equilibrium potential, highlighting the heterobimetallic cooperation for the design of CO2 reduction catalysts. However, numerous NiFe biomimetic model complexes have realized little success in CO2 reduction catalysis, which underscores the crucial role of precise bimetallic configuration and functionality. Herein, we presented a heterobimetallic NiFe complex for the photocatalytic reduction of CO2 to CO, demonstrating significantly enhanced catalytic performance compared to the homonuclear NiNi catalyst. Photocatalytic and mechanistic investigations revealed that with the assistance of a redox-active phenanthroline ligand, NiFe achieves dual-site activation of CO2 through a pivotal intermediate, NiII(μ-CO22--κC:κO)FeII, where the Lewis acidity of the FeII site plays an important role, as corroborated in the homonuclear FeFe system. This study introduces the first heteronuclear NiFe molecular catalyst capable of efficiently catalyzing the reduction of CO2 to CO, deepening insights into heterobimetallic cooperation and offering a novel strategy for designing highly active and selective CO2 reduction catalysts.

Nonheme binuclear transition metal complexes with hydrosulfide and polychalcogenides

The intriguing chemistry of chalcogen (S, Se)-containing ligands and their capability to bridge multiple metal centres have resulted in a plethora of reports on transition metal complexes featuring hydrosulfide (HS-) and polychalcogenides (En2-, E = S, Se). While a large number of such molecules are strictly organometallic complexes, examples of non-organometallic complexes featuring HS- and En2- with N-/O-donor ligands are relatively rare. The general synthetic procedure for the transition metal-hydrosulfido complexes involves the reaction of the corresponding metal salts with HS-/H2S and this is prone to generate sulfido bridged oligomers in the absence of sterically demanding ligands. On the other hand, the synthetic methods for the preparation of transition metal-polychalcogenido complexes include the reaction of the corresponding metal salts with En2- or the two electron oxidation of low-valent metals with elemental chalcogen, often at an elevated temperature and/or for a long time. Recently, we have developed new synthetic methods for the preparation of two new classes of binuclear transition metal complexes featuring either HS-, or Sn2- and Sen2- ligands. The new method for the synthesis of transition metal-hydrosulfido complexes involved transition metal-mediated hydrolysis of thiolates at room temperature (RT), while the method for the synthesis of transition metal-polychalcogenido complexes involved redox reaction of coordinated thiolates and exogenous elemental chalcogens at RT. An overview of the synthetic aspects, structural properties and intriguing reactivity of these two new classes of transition metal complexes is presented.

Bioinspired Binickel Catalyst for Carbon Dioxide Reduction: The Importance of Metal-ligand Cooperation

Catalyst design for the efficient CO2 reduction reaction (CO2RR) remains a crucial challenge for the conversion of CO2 to fuels. Natural Ni-Fe carbon monoxide dehydrogenase (NiFe-CODH) achieves reversible conversion of CO2 and CO at nearly thermodynamic equilibrium potential, which provides a template for developing CO2RR catalysts. However, compared with the natural enzyme, most biomimetic synthetic Ni-Fe complexes exhibit negligible CO2RR catalytic activities, which emphasizes the significance of effective bimetallic cooperation for CO2 activation. Enlightened by bimetallic synergy, we herein report a dinickel complex, NiIINiII(bphpp)(AcO)2 (where NiNi(bphpp) is derived from H2bphpp = 2,9-bis(5-tert-butyl-2-hydroxy-3-pyridylphenyl)-1,10-phenanthroline) for electrocatalytic reduction of CO2 to CO, which exhibits a remarkable reactivity approximately 5 times higher than that of the mononuclear Ni catalyst. Electrochemical and computational studies have revealed that the redox-active phenanthroline moiety effectively modulates the electron injection and transfer akin to the [Fe3S4] cluster in NiFe-CODH, and the secondary Ni site facilitates the C-O bond activation and cleavage through electron mediation and Lewis acid characteristics. Our work underscores the significant role of bimetallic cooperation in CO2 reduction catalysis and provides valuable guidance for the rational design of CO2RR catalysts.

Coordination Number in High-Spin-Low-Spin Equilibrium in Cluster Models of the S2 State of the Oxygen Evolving Complex

The S2 state of the Oxygen Evolving Complex (OEC) of Photosystem II (PSII) shows high-spin (HS) and low-spin (LS) EPR signals attributed to distinct structures based on computation. Five-coordinate MnIII centers are proposed in these species but are absent in available spectroscopic model complexes. Herein, we report the synthesis, crystal structure, electrochemistry, SQUID magnetometry, and EPR spectroscopy of a MnIIIMnIV3O4 cuboidal complex featuring five-coordinate MnIII. This cluster displays a spin ground state of S = 5/2, while conversion to a six-coordinate Mn upon treatment with water results in a spin state change to S = 1/2. These results demonstrate that coordination number, without dramatic changes within the Mn4O4 core, has a substantial effect on spectroscopy.

The Sulfur Rich Fluorothiophosphate Dianions [S5 P2 F2 ]2- and [S3 PF]2- : Cluster and Chelation Control of P-S Heterolysis

The sulfur rich difluoropentathiodiphosphate dianion [S₅ P₂ F₂ ]^2- , from fluoride addition to P₄ S₁₀ , has a somewhat checkered history and proves to be the main product of the reaction in acetonitrile. Its optimized synthesis, and structural characterization, as either a tetraphenylphosphonium or a tetrapropylammonium salt, [Nⁿ Pr₄ ]₂ [S₅ P₂ F₂ ] allows for the first coordination chemistry for this dianion. Reactions of [S₅ P₂ F₂ ]^2- with d¹⁰ metal ions of zinc(II), and cadmium(II), and d⁹ copper(II) resulted in a surprising diverse array of binding modes and structural motifs. In addition to the simple bis-chelate coordination of [S₅ P₂ F₂ ]^2- with zinc, cleavage of the P-S bond resulted in complexes with the unusual [S₃ PF]^2- fluorotrithiophosphate dianion. This was observed in two cluster complexes: a trinuclear cadmium complex with mixed [S₅ P₂ F₂ ]^2- /[S₃ PF]^2- ligands, [Cd₃ (S₅ P₂ F₂ )₃ (S₃ PF)₂ ]^4- as well as an octanuclear copper cluster, [Cu₈ (S₃ PF)₆ ]^4- which form rapidly at room temperature. These new metal/sulfur/ligand clusters are of relevance to understanding multimetal binding to metallothionines, and to potential capping strategies for the condensed nanoparticulate cadmium chalcogenide semiconductors CdS and CdSe.

Molecular Transition Metal Oxide Electrocatalysts for the Reversible Carbon Dioxide-Carbon Monoxide Transformation

Carbon monoxide dehydrogenase (CODH) enzymes are active for the reversible CO oxidation-CO₂ reduction reaction and are of interest in the context of CO₂ abatement and carbon-neutral solar fuels. Bioinspired by the active-site composition of the CODHs, polyoxometalates triply substituted with first-row transition metals were modularly synthesized. The polyanions, in short, {SiM₃ W₉ } and {SiM'₂ M''W₉ }, M, M', M''=Cu^II , Ni^II , Fe^III are shown to be electrocatalysts for reversible CO oxidation-CO₂ reduction. A catalytic Tafel plot showed that {SiCu₃ W₉ } was the most reactive for CO₂ reduction, and electrolysis reactions yielded significant amounts of CO with 98 % faradaic efficiency. In contrast, Fe-Ni compounds such as {SiFeNi₂ W₉ } preferably catalyzed the oxidation of CO to CO₂ similar to what is observed for the [NiFe]-CODH enzyme. Compositional control of the heterometal complexes, now and in the future, leads to control of reactivity and selectivity for CO₂ electrocatalytic reduction.

Thiolate Coordination vs C-S Bond Cleavage of Thiolates in Dinickel(II) Complexes

A detailed study for the synthesis of dinickel(II)-thiolate and dinickel(II)-hydrosulfide complexes and the complete characterization of the relevant intermediates involved in the C-S bond cleavage of thiolates are presented. Hydrated Ni(II) salts mediate the hydrolytic C-S bond cleavage of thiolates (NaSR/RSH; R = Me, Et, ⁿBu, ^tBu), albeit inefficiently, to yield a mixture of a dinickel(II)-hydrosulfide complex, [Ni₂(BPMP)(μ-SH)(DMF)₂]²⁺ (1), and the corresponding dinickel(II)-thiolate complexes, such as [Ni₂(BPMP)(μ-SEt)(ClO₄)]¹⁺ (2) (HBPMP is 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol). A systematic study for the reactivity of thiolates with Ni(II) was therefore pursued which finally yielded 1 as a pure product which has been characterized in comparison with the dinickel(II)-dichloride complex, [Ni₂(BPMP)(Cl)₂(MeOH)₂]¹⁺ (3). While the reaction of thiolates with anhydrous Ni(OTf)₂ in dry conditions could only yield [Ni₂(BPMP)(OTf)₂]¹⁺ (5) instead of the expected dinickel(II)-thiolate compound, the C-S bond cleavage could be suppressed by the use of a chelating thiol, such as PhCOSH, to yield [Ni₂(BPMP)(SCOPh)₂]¹⁺ (6). Finally, with the suitable choice of a monodentate thiol, a dinickel(II)-monothiolate complex, [Ni₂(BPMP)(SPh)(DMF)(MeOH)(H₂O)]²⁺ (7), was isolated as a pure product within 1 h of reaction, which after a longer time of reaction yielded 1 and PhOH. Complex 7 may thus be regarded as the intermediate that precedes the C-S bond cleavage and is generated by the reaction of a thiolate with an initially formed dinickel(II)-solvento complex, [Ni₂(BPMP)(MeOH)₂(H₂O)₂]³⁺(4). Selected dinickel(II) complexes were explored further for the scope of substitution reactions, and the results include the isolation of a dinickel(II)-bis(thiolate) complex, [Ni₂(BPMP)(μ-SPh)₂]¹⁺ (8).

Light-driven catalysis with engineered enzymes and biomimetic systems

Efforts to drive catalytic reactions with light, inspired by natural processes like photosynthesis, have a long history and have seen significant recent growth. Successfully engineering systems using biomolecular and bioinspired catalysts to carry out light-driven chemical reactions capitalizes on advantages offered from the fields of biocatalysis and photocatalysis. In particular, driving reactions under mild conditions and in water, in which enzymes are operative, using sunlight as a renewable energy source yield environmentally friendly systems. Furthermore, using enzymes and bioinspired systems can take advantage of the high efficiency and specificity of biocatalysts. There are many challenges to overcome to fully capitalize on the potential of light-driven biocatalysis. In this mini-review, we discuss examples of enzymes and engineered biomolecular catalysts that are activated via electron transfer from a photosensitizer in a photocatalytic system. We place an emphasis on selected forefront chemical reactions of high interest, including CH oxidation, proton reduction, water oxidation, CO2 reduction, and N2 reduction.

Hydrosulfide complexes of the transition elements: diverse roles in bioinorganic, cluster, coordination, and organometallic chemistry

Molecules containing transition metal hydrosulfide linkages are diverse, spanning a variety of elements, coordination environments, and redox states, and carrying out multiple roles across several fields of chemistry.

Biomimetic Approach to CO2 Reduction

The development of artificial photosynthetic technologies able to produce solar-fuels from CO₂ reduction is a fundamental task that requires the employment of specific catalysts being accomplished. Besides, effective catalysts are also demanded to capture atmospheric CO₂, mitigating the effects of its constantly increasing emission. Biomimetic transition metal complexes are considered ideal platforms to develop efficient and selective catalysts to be implemented in electrocatalytic and photocatalytic devices. These catalysts, designed according to the inspiration provided by nature, are simple synthetic molecular systems capable of mimic features of the enzymatic activity. The present review aims to focus the attention on the mechanistic and structural aspects highlighted to be necessary to promote a proper catalytic activity. The determination of these characteristics is of interest both for clarifying aspects of the catalytic cycle of natural enzymes that are still unknown and for developing synthetic molecular catalysts that can readily be applied to artificial photosynthetic devices.

Site preferences in hetero-metallic [Fe9-xNix] clusters: a combined crystallographic, spectroscopic and theoretical analysis

The reaction of mixtures of Fe(O₂CMe)₂·2H₂O and Ni(O₂CMe)₂·4H₂O of various compositions with di-2-pyridyl ketone (py₂CO, dpk) in MeCN under an inert atmosphere afforded a family of hetero-metallic enneanuclear clusters with general formula [Fe_9-xNi_x(μ₄-OH)₂(O₂CMe)₈(py₂CO₂)₄] (2, x = 1.00; 3: x = 6.02; 4, x = 7.46; 5, x = 7.81). Clusters 2-5 are isomorphous to the homo-metallic [Fe₉] cluster (1) previously reported by some of us, and also isostructural to the known homo-metallic [Ni₉] cluster. All four clusters contain a central M^II ion in an unusual 8-coordinate site and eight peripheral M^II ions in distorted octahedral environments. The distribution of Fe^II and Ni^II ions over these two distinct coordination sites in 2-5 can be established through a combination of X-ray fluorescence and Mössbauer spectroscopies, which show that Fe^II preferentially occupies the unique 8-coordinate metal site while Ni^II accumulates in the octahedral holes. Density functional theory indicates that the distribution of ions across the two sites arises not from any intrinsic preference of the Fe^II ions for the 8-coordinate sites, but rather because of the large ligand field stabilization energy available to Ni^II in octahedral coordination.

Carbon dioxide binding at a Ni/Fe center: synthesis and characterization of Ni(η1-CO2-κC) and Ni-μ-CO2-κC:κ2O,O'-Fe

The degree of CO2 activation can be tuned by incorporating a distinct electronic coordination environment at the nickel center. A mononuclear nickel carboxylate species (Ni-CO2, 3) and a dinuclear nickel-iron carboxylate species (Ni-CO2-Fe, 5) were prepared. The structure of 3 reveals a rare η1-κC binding mode of CO2, while that of 5 shows bridging CO2 binding (μ2-κC:κ2O,O') between the nickel and iron, presented as the first example of a nickel-μ-CO2-iron species. The structural analyses of 3 and 5 based on XRD and DFT data reveal a higher degree of CO2 activation in 5, imparted by the additional interaction with an iron ion.

Coinage metal coordination chemistry of stable primary, secondary and tertiary ferrocenylethyl-based phosphines

Ferrocene-based phosphines constitute an important auxiliary ligand in inorganic chemistry. Utilizing the (ferrocenylethyl)phosphines (FcCH2CH2)3-nHnP (Fc = ferrocenyl; n = 2, 1; n = 1, 2; n = 0, 3) the synthesis of a series of coordination complexes [(FcCH2CH2)3-nHnPCuCl]4 (n = 2, 1-CuCl; n = 0, 3-CuCl), [(FcCH2CH2)2HPCuCl] (2-CuCl), {[(FcCH2CH2)H2P]2AgCl}2 (1-AgCl), [(FcCH2CH2)2HPAgCl] (2-AgCl), [(FcCH2CH2)3PAgCl]4 (3-AgCl), [(FcCH2CH2)3PM(OAc)]4 (M = Cu, 3-CuOAc M = Ag, 3-AgOAc), [(FcCH2CH2)3-nHnPAuCl] (n = 1, 2-AuCl; n = 0, 3-AuCl), via the reaction between the free phosphine and MX (M = Cu, Ag and Au; X = Cl, OAc), is described. The reaction between the respective phosphine with a suspension of metal-chloride or -acetate in a 1 : 1 ratio in THF at ambient temperature affords coordinated phosphine-coinage metal complexes. Varying structural motifs are observed in the solid state, as determined via single crystal X-ray analysis of 1-CuCl, 3-CuCl, 1-AgCl, 3-AgCl, 3-CuOAc, 3-AgOAc, 2-AuCl and 3-AuCl. Complexes 1-CuCl and 3-CuCl are tetrameric Cu(i) cubane-like structures with a Cu4Cl4 core, whereas silver complexes with primary and tertiary phosphine reveal two different structural types. The structure of 1-AgCl, unlike the rest, displays the coordination of two phosphines to each silver atom and shows a quadrangle defined by two Ag and two Cl atoms. In contrast, 3-AgCl is distorted from a cubane structure via elongation of one of the ClAg distances. 3-CuOAc and 3-AgOAc are isostructural with step-like cores, while complexes 2-AuCl and 3-AuCl reveal a linear geometry of a phosphine gold(i) chloride devoid of any aurophilic interactions. All of the complexes were characterized in solution by multinuclear (1)H, (13)C{(1)H} and (31)P NMR spectroscopic techniques; the redox chemistry of the series of complexes was examined using cyclic voltammetry. This class of complexes has been found to exhibit one reversible Fe(ii)/Fe(iii) oxidation couple, suggesting the absence of electronic communication between the ferrocenyl units on individual phosphine ligands as well as between different phosphines on the polymetallic cores.

Bioinorganic modeling chemistry of carbon monoxide dehydrogenases: description of model complexes, current status and possible future scopes

Carbon monoxide dehydrogenases (CODHs) use CO as their sole source of carbon and energy and are found in both aerobic and anaerobic carboxidotrophic bacteria. Reversible transformation of CO to CO2 is catalyzed by a bimetallic [Mo-(μ2-S)-Cu] system in aerobic and by a highly asymmetric [Ni-Fe-S] cluster in anaerobic CODH active sites. The CODH activity in the microorganisms effects the removal of almost 10(8) tons of CO annually from the lower atmosphere and earth and thus help to maintain a sub-toxic concentration of CO. Despite an appreciable amount of work, the mechanism of CODH activity is not clearly understood yet. Moreover, biomimetic chemistry directed towards the active sites of CODHs faces several synthetic challenges. The synthetic problems associated with the modeling chemistry and strategies adopted to overcome those problems are discussed along with their limitations. A critical analysis of the exciting results delineating the present status of CODH modeling chemistry and its future prospects are presented.

Synthesis of binucleating macrocycles and their nickel(II) hydroxo- and cyano-bridged complexes with divalent ions: anatomical variation of ligand features

The planar NNN-pincer complexes [M(II)(pyN(2)(Me2))(OH)](1-) (M(II) = Ni, Cu) fix CO(2) in η(1)-OCO(2)H complexes; results for the copper system are described. Mn(II), Fe(II), Co(II), and Zn(II) behave differently, forming [M(II)(pyN(2)(Me2))(2)](2-) with N(4)O(2) coordination. Incorporation of the Ni(II) pincer into binucleating macrocycle 2 containing a triamino M(II) locus connected by two 1,3-biphenylene groups affords proximal Ni(II) and M(II) sites for investigation of the synthesis, structure, and reactivity of Ni-X-M bridge units. This ligand structure is taken as a reference for variations in M(II) atoms and binding sites and bridges X = OH(-) and CN(-) to produce additional members of the macrocyclic family with improved properties. Macrocycle 2 with a 22-membered ring is shown to bind M(II) = Mn, Fe, and Cu with hydroxo bridges. Introduction of the 4-Bu(i)O group (macrocycle 3) improves the solubility of neutral complexes such as those with Ni(II)-OH-Cu(II) and Ni(II)-CN-Fe(II) bridges. Syntheses of macrocycle 5 with a 7-Me-[12]aneSN(3) and macrocycle 6 with a 1,8-Me(2)-[14]aneN(4) M(II) binding site are described together with hydoxo-bridged Ni/Cu and cyano-bridged Ni/Fe complexes. This work was motivated by the presence of a Ni···(HO)-Fe bridge grouping in a reactive state of carbon monoxide dehydrogenase. Attempted decrease in Ni-(OH)-M distances (3.70-3.87 Å) to smaller values observed in the enzyme by use of macrocycle 4 having 1,2-biphenylene connectors led to a mononuclear octahedral Ni(II) complex. Bridge structural units are summarized, and the structures of 14 macrocyclic complexes including 8 with bridges are described.

Tridentate thiolate ligands: application to the synthesis of the site-differentiated [4Fe-4S] cluster having a hydrosulfide ligand at the unique iron center

We have designed new trithiols Temp(SH)(3) and Tefp(SH)(3) that can be synthesized conveniently in short steps and are useful for preparation of crystalline [3:1] site-differentiated [4Fe-4S] clusters suitable for X-ray structural analysis. The ethanethiolate clusters (PPh(4))(2)[Fe(4)S(4)(SEt)(TempS(3))] (4a) and (PPh(4))(2)[Fe(4)S(4)(SEt)(TefpS(3))] (4b) were prepared as precursors, and the unique iron sites were then selectively substituted. Upon reaction with H(2)S, (PPh(4))(2)[Fe(4)S(4)(SH)(TempS(3))] (6a) and (PPh(4))(2)[Fe(4)S(4)(SH)(TefpS(3))] (6b), which model the [4Fe-4S] cluster in the β subunit of (R)-2-hydroxyisocaproyl-CoA dehydratase, were synthesized. Clusters 6a and 6b were further converted to the sulfido-bridged double cubanes (PPh(4))(4)[{Fe(4)S(4)(TempS(3))}(2)(μ(2)-S)] (7a) and (PPh(4))(4)[{Fe(4)S(4)(TefpS(3))}(2)(μ(2)-S)] (7b), respectively, via intermolecular condensation with the release of H(2)S. Conversely, addition of H(2)S to 7a,b afforded the hydrosulfide clusters 6a,b. The molecular structures of the clusters reported herein were elucidated by X-ray crystallographic analysis. Their redox properties were investigated by cyclic voltammetry.

Remote effects of axial ligand substitution in heterometallic Cr≡Cr···M chains

The heterometallic complexes CrCrM(dpa)(4)Cl(2) (dpa = 2,2'-dipyridylamide) featuring linear Cl-Cr≡Cr···M-Cl chains can regiospecifically be modified via axial ligand substitution to yield OTf-Cr≡Cr···M-Cl chains (OTf = triflate) with M being Fe, Mn, or Co. The effect of OTf substitution on the Cr side of the molecule has an unusual and profound structural impact on the square-pyramidal transition metal M. Specifically, elongation of the four equatorial M-N(py) bonds and the axial M-Cl bonds by 0.03 and 0.09 Å for Fe and 0.07 and 0.11 Å for Mn is observed. The longer M-Cl and M-N(py) bonds result from subtle interactions between the equatorial dpa ligand and the three metal ions. The equatorial dpa ligand responds to the introduction of the more labile OTf ligand at Cr by binding more strongly to this Cr ion which in turn weakens bonding to M. The ligand field experienced by M can be tuned by changing the Cr axial ligand, and this effect is observed in electrochemical measurements of the iron compounds.

Metal centers in the anaerobic microbial metabolism of CO and CO2

Carbon dioxide and carbon monoxide are important components of the carbon cycle. Major research efforts are underway to develop better technologies to utilize the abundant greenhouse gas, CO(2), for harnessing 'green' energy and producing biofuels. One strategy is to convert CO(2) into CO, which has been valued for many years as a synthetic feedstock for major industrial processes. Living organisms are masters of CO(2) and CO chemistry and, here, we review the elegant ways that metalloenzymes catalyze reactions involving these simple compounds. After describing the chemical and physical properties of CO and CO(2), we shift focus to the enzymes and the metal clusters in their active sites that catalyze transformations of these two molecules. We cover how the metal centers on CO dehydrogenase catalyze the interconversion of CO and CO(2) and how pyruvate oxidoreductase, which contains thiamin pyrophosphate and multiple Fe(4)S(4) clusters, catalyzes the addition and elimination of CO(2) during intermediary metabolism. We also describe how the nickel center at the active site of acetyl-CoA synthase utilizes CO to generate the central metabolite, acetyl-CoA, as part of the Wood-Ljungdahl pathway, and how CO is channelled from the CO dehydrogenase to the acetyl-CoA synthase active site. We cover how the corrinoid iron-sulfur protein interacts with acetyl-CoA synthase. This protein uses vitamin B(12) and a Fe(4)S(4) cluster to catalyze a key methyltransferase reaction involving an organometallic methyl-Co(3+) intermediate. Studies of CO and CO(2) enzymology are of practical significance, and offer fundamental insights into important biochemical reactions involving metallocenters that act as nucleophiles to form organometallic intermediates and catalyze C-C and C-S bond formations.

The [MoFe3S4]2+ oxidation state: synthesis, substitution reactions, and structures of phosphine-ligated cubane-type clusters with the S=2 ground state

The cluster [(Tp)MoFe(3)S(4)(PEt(3))(3)](1+) containing the cubane-type [MoFe(3)(μ(3)-S)(4)](2+) reduced core undergoes facile ligand substitution reactions at the iron sites leading to an extensive set of mono- and disubstituted species [(Tp)MoFe(3)S(4)(PEt(3))(3-n)L(n)](1-n) with L = halide, N(3)(-), PhS(-), PhSe(-), R(3)SiO(-), and R(3)SiS(-) and n = 1 and 2. Structures of 10 members of the set are reported. For two representative clusters, Curie behavior at 2-20 K indicates a spin-quintet ground state. Zero-field Mössbauer spectra consist of two doublets in a 2:1 intensity ratio. (57)Fe isomer shifts are consistent with the mean oxidation state Fe(3)(2.33+) arising from electron delocalization of the mixed-valence oxidation state description [Mo(3+)Fe(3+)Fe(2+)(2)]. Reaction of [(Tp)MoFe(3)S(4)(PEt(3))(2)Cl] with (Me(3)Si)(2)S affords [(Tp)MoFe(3)S(4)(PEt(3))(2)(SSiMe(3))], a likely first intermediate in the formation of the tricluster compound {[(Tp)MoFe(3)S(4)(PEt)(2)](3)S}(BPh(4)) from the reaction of [(Tp)MoFe(3)S(4)(PEt(3))(3)](BPh(4)) and NaSSiMe(3) in tetrahydrofuran (THF). The tricluster consists of three cluster units bound to a central μ(3)-S atom in a species of overall C(3) symmetry. Relatively few clusters in the [MoFe(3)S(4)](2+) oxidation state have been prepared compared to the abundance of clusters in the oxidized [MoFe(3)S(4)](3+) state. This work is the first comprehensive study of the [MoFe(3)S(4)](2+) state, one conspicuous feature of which is its ability to bind hard and soft σ-donors and strong to weak π-acid ligands. (Tp = tris(pyrazolyl)hydroborate(1-)).

Dimerization of pentanuclear clusters [Fe3Q(AsMe)(CO)9] (Q = Se, Te) as a conversion pathway to novel cubane-like aggregates

The first examples of carbonyl heterocubane-type clusters, [Fe(4)(μ(3)-Q)(2)(μ(3)-AsMe)(2)(CO)(12)] (2, Q = Se (a), Te (b)), which simultaneously contain elements of group 15 and 16, were obtained by thermolysis of [Fe(3)(μ(3)-Q)(μ(3)-AsMe)(CO)(9)] (1) in acetonitrile. The clusters 2 possess a cubic Fe(4)Q(2)As(2) core with alternating Fe and Q/As atoms. The coordination environment of the Fe atoms is close to octahedral, and those of Q or As atoms are tetrahedral, which determines the distorted cubic cluster core geometry. The second main products of thermolysis are the clusters [Fe(6)(μ(3)-Q)(μ(4)-Q)(μ(4)-AsMe)(2)(CO)(12)] (3a,b), whose core contains double the elemental composition of the initial cluster 1. In the case of the Se-containing cluster two other minor products [Fe(4)(μ(4)-Se)(μ(4)-SeAsMe)(CO)(12)] (4) and [Fe(3)(μ(3)-AsMe)(2)(CO)(9)] (5) are formed. Based on the structures and properties of the products, a reaction route for the conversion of 1 into 2 is proposed, which includes the associative formation of the clusters 3 as intermediates, unlike the dissociative pathways previously known for the transformations of similar clusters of the type [Fe(3)Q(2)(CO)(9)].

Cleavage of Ni-(mu(2)-S)-Ni bridges in dinuclear nickel(II) dithiolate pincer complexes and related reactions

Pyridine-2,6-dimethanethiolate and pyridine-2,6-dithiocarboxylate form sparingly soluble Ni(II) pincer complexes formulated as [Ni(pdmt)](2) and [Ni(pdtc)](2), respectively, with two Ni-(mu(2)-S)-Ni bridges. In acetonitrile reaction systems, the latter undergoes the facile bridge cleavage reactions [Ni(pdtc)](2) + 2L(0,-) --> 2[Ni(pdtc)L](0,-) with an extensive set of nucleophiles to afford planar mononuclear products with L(-) = halide, CN, Me(3)SiO(-), RS(-) and L(0) = Et(3)P and a N-heterocyclic carbene. [Ni(pdmt)](2) is considerably less reactive toward bridge disruption. Cleavage products support several reactions of interest leading to other mononuclear species and to di- and trinuclear complexes. [Ni(pdtc)(OSiMe(3))](1-) deprotonates acetonitrile and acetone to form [Ni(pdtc)(CH(2)R)](1-) (R = CN, COMe). Reaction of [Ni(pdtc)SEt](1-) with Fe(II) yields the thiolate-bridged dimer {[Ni(pdtc)](2)(SEt)}(1-). Refluxing an acetonitrile solution of [Ni(pdtc)SH](1-) in air results in formation of trinuclear [Ni(pdtc)](3)S](2-) containing the rare unsupported Ni(3)(mu(3)-S) bridge core. Reaction of [Ni(pdtc)CN](1-) with [Fe(Me(6)tren)(OTf)](1+) forms the complex [Ni(pdtc)CNFe(Me(6)tren)](1+), the only example of a single Ni-C[triple bond]N-Fe bridge within a molecule. Structures of the various types of reaction products are presented. This work demonstrates the potential utility of bridge cleavage of polynuclear Ni(II) thiolates, an extensive family of compounds, to produce mononuclear products.

Core conversion reactions of the cubane-type metal-sulfido clusters: shape shift, contraction, and expansion of the MM'Re2S4 Cubanes (M = Ir, Rh, Ru; M' = Pt, Pd)

Treatment of incomplete cubane-type clusters [(Cp*M){Re(L)}(2)(mu(3)-S)(mu(2)-S)(3)] (M = Ir (1a), Rh (1b); Cp* = eta(5)-C(5)Me(5); L = S(2)C(2)(SiMe(3))(2)) and [{(Pmb)Ru}{Re(L)}(2)(mu(3)-S)(mu(2)-S)(3)] (Pmb = eta(6)-C(6)Me(5)H) with 1 equiv of [Pt(PPh(3))(3)] gave tetranuclear tetra(sulfido) clusters having raft-type cores, [(Cp*M){Pt(PPh(3))(2)}{Re(L)}(2)(mu(3)-S)(4)] (M = Ir (3a), Rh) and [{(Pmb)Ru}{Pt(PPh(3))(2)}{Re(L)}(2)(mu(3)-S)(4)], which presents a sharp contrast to the reactions with [Pd(PPh(3))(4)] reported previously, affording the cubane-type clusters [(Cp*M){Pd(PPh(3))}{Re(L)}(2)(mu(3)-S)(4)] (M = Ir (2a), Rh) and [{(Pmb)Ru}{Pd(PPh(3))}{Re(L)}(2)(mu(3)-S)(4)]. The reactions of 2a with diphosphines P2 resulted in the conversion of its cubane-type core into the analogous raft-type frameworks, forming [(Cp*Ir){Pd(P2)}{Re(L)}(2)(mu(3)-S)(4)] (P2 = cis-Ph(2)PCH=CHPPh(2) (6), Ph(2)PCH(2)CH(2)PPh(2), Ph(2)PCH(2)CH(2)CH(2)PPh(2)). On the other hand, when 2 was allowed to react with Ph(2)PCH(2)PPh(2) (dppm) as P2, the trinuclear tri(sulfido) cluster [(Cp*Ir){Re(L)}(2)(mu(3)-S)(2)(mu(2)-S)(mu(2)-dppm)] (9a) was obtained. Alternatively, this cluster 9a and its Rh analogue 9b were derived from the incomplete cubane-type clusters 1a and 1b by treatment with dppm. It has also been found that further treatment of the cubane-type cluster 2a with excess [Pd(PPh(3))(4)] affords the heptanuclear tetra(sulfido) cluster [(Cp*Ir){Pd(PPh(3))}(4)Re(2)(mu(3)-L)(2)(mu(3)-S)(4)] (10). The detailed structures have been determined by the X-ray analyses for 3a, 6, 9a, and 10.

Reactions of the terminal Ni(II)-OH group in substitution and electrophilic reactions with carbon dioxide and other substrates: structural definition of binding modes in an intramolecular Ni(II)...Fe(II) bridged site

A singular feature of the catalytic C-cluster of carbon monoxide dehydrogenase is a sulfide-bridged Ni...Fe locus where substrate is bound and transformed in the reversible reaction CO + H(2)O right harpoon over left harpoon CO(2) + 2H(+) + 2e(-). A similar structure has been sought in this work. Mononuclear planar Ni(II) complexes [Ni(pyN(2)(Me2))L](1-) (pyN(2)(Me2) = bis(2,6-dimethylphenyl)-2,6-pyridinedicarboxamidate(2-)) derived from a NNN pincer ligand have been prepared including L = OH(-) (1) and CN(-) (7). Complex 1 reacts with ethyl formate and CO(2) to form unidentate L = HCO(2)(-) (5) and HCO(3)(-) (6) products. A binucleating macrocycle was prepared which specifically binds Ni(II) at a NNN pincer site and five-coordinate Fe(II) at a triamine site. The Ni(II) macrocyle forms hydroxo (14) and cyanide complexes (15) analogous to 1 and 7. Reaction of 14 with FeCl(2) alone and with ethyl formate and 15 with FeCl(2) affords molecules with the Ni(II)-L-Fe(II) bridge unit in which L = mu(2):eta(1)-OH(-) (17) and mu(2):eta(2)-HCO(2)(-) (18) and -CN(-) (19). All bridges are nonlinear (17, 140.0 degrees ; 18, M-O-C 135.9 degrees (Ni), 120.2 degrees (Fe); 19, Ni-C-N 170.3 degrees , Fe-N-C 141.8 degrees ) with Ni...Fe separations of 3.7-4.8 A. The Ni(II)Fe(II) complexes, lacking appropriate Ni-Fe-S cluster structures, are not site analogues, but their synthesis and reactivity provide the first demonstration that molecular Ni(II)...Fe(II) sites and bridges can be attained, a necessity in the biomimetic chemistry of C-clusters.

A Series of Cyanide-Bridged Binuclear Complexes

A series of cyanide-bridged binuclear complexes, ('S(3)')Ni-CN-M[Tp(tBu)] ('S(3)' = bis(2-mercaptophenyl)sulfide, Tp(tBu) = hydrotris(3-tert-butylpyrazolyl)borate, M = Fe (2-Fe), Co (2-Co), Ni (2-Ni), Zn (2-Zn)) was prepared by the coupling of K[('S(3)')Ni(CN)] with [Tp(tBu)]MX. The isostructural series of complexes was structurally and spectroscopically characterized. A similar coupling strategy was used to synthesize the anionic copper(I) analogue, Et4N{('S3')Ni-CN-Cu[Tp(tBu)]}, 2-Cu.An alternative synthesis was devised for the preparation of the linkages isomers of 2-Zn, i.e. of cyanide-bridged linkage isomers. X-ray diffraction, (13)C NMR and IR spectral studies established that isomerization to the more stable Ni-CN-Zn isomer occurs. DFT computational results buttressed the experimental observations indicating that the cyanide-bridged isomer is ca. 5 kcal/mol more stable than its linkage isomer.

Biomimetic chemistry of iron, nickel, molybdenum, and tungsten in sulfur-ligated protein sites

Biomimetic inorganic chemistry has as its primary goal the synthesis of molecules that approach or achieve the structures, oxidation states, and electronic and reactivity features of native metal-containing sites of variant nuclearity. Comparison of properties of accurate analogues and these sites ideally provides insight into the influence of protein structure and environment on intrinsic properties as represented by the analogue. For polynuclear sites in particular, the goal provides a formidable challenge for, with the exception of iron-sulfur clusters, all such site structures have never been achieved and few have even been closely approximated by chemical synthesis. This account describes the current status of the synthetic analogue approach as applied to the mononuclear sites in certain molybdoenzymes and the polynuclear sites in hydrogenases, nitrogenase, and carbon monoxide dehydrogenases.

Acetogenesis and the Wood-Ljungdahl pathway of CO(2) fixation

Conceptually, the simplest way to synthesize an organic molecule is to construct it one carbon at a time. The Wood-Ljungdahl pathway of CO(2) fixation involves this type of stepwise process. The biochemical events that underlie the condensation of two one-carbon units to form the two-carbon compound, acetate, have intrigued chemists, biochemists, and microbiologists for many decades. We begin this review with a description of the biology of acetogenesis. Then, we provide a short history of the important discoveries that have led to the identification of the key components and steps of this usual mechanism of CO and CO(2) fixation. In this historical perspective, we have included reflections that hopefully will sketch the landscape of the controversies, hypotheses, and opinions that led to the key experiments and discoveries. We then describe the properties of the genes and enzymes involved in the pathway and conclude with a section describing some major questions that remain unanswered.

Enzymology of the wood-Ljungdahl pathway of acetogenesis

The biochemistry of acetogenesis is reviewed. The microbes that catalyze the reactions that are central to acetogenesis are described and the focus is on the enzymology of the process. These microbes play a key role in the global carbon cycle, producing over 10 trillion kilograms of acetic acid annually. Acetogens have the ability to anaerobically convert carbon dioxide and CO into acetyl-CoA by the Wood-Ljungdahl pathway, which is linked to energy conservation. They also can convert the six carbons of glucose stoichiometrically into 3 mol of acetate using this pathway. Acetogens and other anaerobic microbes (e.g., sulfate reducers and methanogens) use the Wood-Ljungdahl pathway for cell carbon synthesis. Important enzymes in this pathway that are covered in this review are pyruvate ferredoxin oxidoreductase, CO dehydrogenase/acetyl-CoA synthase, a corrinoid iron-sulfur protein, a methyltransferase, and the enzymes involved in the conversion of carbon dioxide to methyl-tetrahydrofolate.

VFe3S4 single and double cubane clusters: synthesis, structures, and dependence of redox potentials and electron distribution on ligation and heterometal

Both vanadium and molybdenum cofactor clusters are found in nitrogenase. In biomimetic research, many fewer heterometal MFe3S4 cubane-type clusters have been synthesized with M = V than with M = Mo because of the well-established structural relationship of the latter to the molybdenum coordination unit in the enzyme. In this work, a series of single cubane and edge-bridged double cubane clusters containing the cores [VFe3(mu3-S)4]2+ and [V2Fe6(mu3-S)6(mu4-S)2]2+ have been prepared by ligand substitution of the phosphine clusters [(Tp)VFe3S4(PEt3)3]1+ and [(Tp)2V2Fe6S8(PEt3)4]. The single cubanes [(Tp)VFe3S4L3]2- and double cubanes [(Tp)2V2Fe6S8L4]4- (L= F-, N3-, CN-, PhS-) are shown by X-ray structures to have trigonal symmetry and centrosymmetry, respectively. Single cubanes form the three-member electron transfer series [(Tp)VFe3S4L3]3-,2-,1-. The ligand dependence of redox potentials and electron distribution in cluster cores as sensed by 57Fe isomer shifts (delta) have been determined. Comparison of these results with those previously determined for the analogous molybdenum clusters (Pesavento, Berlinguette, and Holm Inorg. Chem. 2007, 46, 510) allows detection of the influence of heterometal M on the properties. At constant M and variable L, redox potentials are lowest for pi-donor ligands and largest for cyanide and relate approximately with decreasing ferrous character in clusters with constant charge z = 2-. At constant L and z and variable M, EV > E(Mo) and delta(av)V < delta(av)Mo, demonstrating that M = Mo clusters are more readily oxidized and suggesting a qualitative relation between lower potentials (greater ease of oxidation) and ferrous character.

Nickel and the carbon cycle

This article, dedicated to Edward Stiefel, reviews three nickel enzymes that play important roles in the carbon cycle: CO dehydrogenase, acetyl-CoA synthase, and methyl-coenzyme M reductase. After a short discussion of the carbon cycle, the structures of the active centers of the proteins and their proposed mechanisms are discussed. A brief description of future research areas is presented for each enzyme system. A short perspective on future research on nickel enzymes ends this contribution.