Structural and Magnetic Studies of a New Co(II) Thiocyanato Coordination Polymer Showing Slow Magnetic Relaxations and a Metamagnetic Transition

Synthesis and crystal structure of diiso-thio-cyanato-tetra-kis-(4-methyl-pyridine N-oxide)cobalt(II) and diiso-thio-cyanato-tris-(4-methyl-pyridine N-oxide)cobalt(II) showing two different metal coordination polyhedra

The reaction of Co(NCS)2 with 4-methyl-pyridine N-oxide (C6H7NO) leads to the formation of two compounds, namely, tetra-kis-(4-methyl-pyridine N-oxide-κO)bis-(thio-cyanato-κN)cobalt(II), [Co(NCS)2(C6H7NO)4] (1), and tris-(4-methyl-pyridine N-oxide-κO)bis-(thio-cyanato-κN)cobalt(II), [Co(NCS)2(C6H7NO)3] (2). The asymmetric unit of 1 consists of one CoII cation located on a centre of inversion, as well as one thio-cyanate anion and two 4-methyl-pyridine N-oxide coligands in general positions. The CoII cations are octa-hedrally coordinated by two terminal N-bonding thio-cyanate anions in trans positions and four 4-methyl-pyridine N-oxide ligands. In the extended structure, these complexes are linked by C-H⋯O and C-H⋯S inter-actions. In compound 2, two crystallographically independent complexes are present, which occupy general positions. In each of these complexes, the CoII cations are coordinated in a trigonal-bipyramidal manner by two terminal N-bonding thio-cyanate anions in axial positions and by three 4-methyl-pyridine N-oxide ligands in equatorial positions. In the crystal, these complex mol-ecules are linked by C-H⋯S inter-actions. For compound 2, a nonmerohedral twin refinement was performed. Powder X-ray diffraction (PXRD) reveals that 2 was nearly obtained as a pure phase, which is not possible for compound 1. Differential thermoanalysis and thermogravimetry data (DTA-TG) show that compound 2 start to decompose at about 518 K.

Synthesis, crystal structure and properties of chlorido-tetra-kis-(pyridine-3-carbo-nitrile)-thio-cyanato-iron(II)

Reaction of FeCl2·4H2O with KSCN and 3-cyano-pyridine (pyridine-3-carbo-nitrile) in ethanol accidentally leads to the formation of single crystals of Fe(NCS)(Cl)(3-cyano-pyridine)4 or [FeCl(NCS)(C6H4N2)4]. The asymmetric unit of this compound consists of one FeII cation, one chloride and one thio-cyanate anion that are located on a fourfold rotation axis as well as of one 3-cyano-pyridine coligand in a general position. The FeII cations are sixfold coordinated by one chloride anion and one terminally N-bonding thio-cyanate anion in trans-positions and four 3-cyano-pyridine coligands that coordinate via the pyridine N atom to the FeII cations. The complexes are arranged in columns with the chloride anions, with the thio-cyanate anions always oriented in the same direction, which shows the non-centrosymmetry of this structure. No pronounced inter-molecular inter-actions are observed between the complexes. Initially, FeCl2 and KSCN were reacted in a 1:2 ratio, which lead to a sample that contains the title compound as the major phase together with a small amount of an unknown crystalline phase, as proven by powder X-ray diffraction (PXRD). If FeCl2 and KSCN is reacted in a 1:1 ratio, the title compound is obtained as a nearly pure phase. IR investigations reveal that the CN stretching vibration for the thio-cyanate anion is observed at 2074 cm-1, and that of the cyano group at 2238 cm-1, which also proves that the anionic ligands are only terminally bonded and that the cyano group is not involved in the metal coordination. Measurements with thermogravimetry and differential thermoanalysis reveal that the title compound decomposes at 169°C when heated at a rate of 4°C min-1 and that the 3-cyano-pyridine ligands are emitted in two separate poorly resolved steps. After the first step, an inter-mediate compound with the composition Fe(NCS)(Cl)(3-cyano-pyridine)2 of unknown structure is formed, for which the CN stretching vibration of the thio-cyanate anion is observed at 2025 cm-1, whereas the CN stretching vibration of the cyano group remain constant. This strongly indicates that the FeII cations are linked by μ-1,3-bridg-ing thio-cyanate anions into chains or layers.

Weakening the Interchain Interactions in One Dimensional Cobalt(II) Coordination Polymers by Preventing Intermolecular Hydrogen Bonding

The reaction of Co(NCS)₂ with N-methylaniline leads to the formation of [Co(NCS)₂(N-methylaniline)₂]_n (1), in which the cobalt(II) cations are octahedrally coordinated and linked into linear chains by pairs of thiocyanate anions. In contrast to [Co(NCS)₂(aniline)₂]_n (2) reported recently, in which the Co(NCS)₂ chains are linked by strong interchain N-H···S hydrogen bonding, such interactions are absent in 1. Computational studies reveal that the cobalt(II) ions in compound 1 show an easy-axis anisotropy that is lower than in 2, but with the direction of the easy axis being similar in both compounds. The high magnetic anisotropy is also confirmed by magnetic and FD-FT THz-EPR spectroscopy, which yield a consistent g_z value. These investigations prove that the intrachain interactions in 1 are slightly higher than in 2. Magnetic measurements reveal that the critical temperature for magnetic ordering in 1 is significantly lower than in 2, which indicates that the elimination of the hydrogen bonds leads to a weakening of the interchain interactions. This is finally proven by FD-FT THz-EPR experiments, which show that the interchain interaction energy in the N-methylaniline compound 1 is nine-fold smaller than in the aniline compound 2.

Co(NCS)2 Chain Compound with Alternating 5- and 6-Fold Coordination: Influence of Metal Coordination on the Magnetic Properties

The reaction of Co(NCS)₂ with 3-bromopyridine leads to the formation of discrete complexes [Co(NCS)₂(3-bromopyridine)₄] (1), [Co(NCS)₂(3-bromopyridine)₂(H₂O)₂] (2), and [Co(NCS)₂(3-bromopyridine)₂(MeOH)₂] (3) depending on the solvent. Thermogravimetric measurements on 2 and 3 show a transformation into [Co(NCS)₂(3-bromopyridine)₂]_n (4), which upon further heating is converted to [{Co(NCS)₂}₂(3-bromopyridine)₃]_n (5), whereas 1 transforms directly into 5 upon heating. Compound 5 can also be obtained from solution, which is not possible for 4. In 4 and 5, the cobalt(II) cations are linked by pairs of μ-1,3-bridging thiocyanate anions into chains. In compound 4, all cobalt(II) cations are octahedrally coordinated (OC-6), as is usually observed in such compounds, whereas in 5, a previously unkown alternating 5- and 6-fold coordination is observed, leading to vacant octahedral (vOC-5) and octahedral (OC-6) environments, respectively. In contrast to 4, the chains in 5 are very efficiently packed and linked by π···π stacking of the pyridine rings and interchain Co···Br interactions, which is the basis for the formation of this unusual chain. The spin chains in 4 demonstrate ferromagnetic intrachain exchange and much weaker interchain interactions, as is usually observed for such linear chain compounds. In contrast, compound 5 shows almost single-ion-like magnetic susceptibility, but the magnetic ordering temperature deduced from specific heat measurements is twice as high as that in 4, which might originate from π···π stacking and Co···Br interactions between neighboring chains. More importantly, unlike all linear Co(NCS)₂ chain compounds, a dominant antiferromagnetic exchange is observed for 5, which is explained by density functional theory calculations predicting an alternating ferro- and aniferromagnetic exchange within the chains. Theoretical calculations on the two different cobalt(II) ions present in 5 predict an easy-axis anisotropy that is much stronger for the octahedral cobalt(II) ion than for the one with the vacant octahedral coordination, with the magnetic axes of the two ions being canted by an angle of 84°. This almost orthogonal orientation of the easy axis of magnetization for the two cobalt(II) ions is the rationale for the observed non-Ising behavior of 5.

Synthesis, crystal structure and magnetic properties of coordination compounds of Mn(NCS)2 with the 3-bromopyridine ligand

Reactions of Mn(NCS)2 with 3-bromopyridine in acetonitrile lead to the formation of Mn(NCS)2(3-bromopyridine)4 (1) and Mn(NCS)2(3-bromopyridine)2(MeCN)2 (2) that were characterized by single crystal X-ray diffraction. Compounds 1 and 2 consist of discrete complexes, in which the Mn(II) cations are octahedrally coordinated by two trans-N-bonding thiocyanate anions and four pyridine (1) or two pyridine and two acetonitrile ligands (2). Thermoanalytical measurements on 1 and 2 have shown that upon heating half of the 3-bromopyridine co-ligands from 1 or both acetonitrile ligands from 2 are removed leading to a crystalline phase with the composition [Mn(NCS)2(3-bromopyridine)2] n (3-II). From dry n-butanol a phase with the same composition was obtained (3-I) that corresponds to a polymorphic or isomeric form of 3-II. Crystal structure analysis of 3-I shows that in this form the Mn cations are linked by pairs of anionic ligands into linear chains. The results of magnetic measurements on 3-I show antiferromagnetic interactions along the chains and the analysis of the magnetic susceptibility using the Fisher model for chains gave a J value of −5.76(5) K.

Reversible single-crystal to single-crystal phase transformation between a new Werner clathrate and its apohost

In this work, we report the synthesis and structural characterisation of the ligand 2-(pyridin-3-yl)-benzo[de]isoquinoline-1,3(2H)-dione, 5, its isostructural Werner complexes ML4(NCS)2 (L = 5; M = Co(II) and Ni(II)), and five clathrates with three aromatic guests, ML4(NCS)2·2G (M = Co(II) and Ni(II), G = nitrobenzene (NB); M = Co, G = 1,2-dichlorobenzene (1,2-DCB); M = Co(II) and Ni(II), G = o-xylene (OX)). 5 was prepared in high yield by condensation in the solid-state (C3S3, Cocrystal Controlled Solid-State Synthesis). The Werner complexes ML4(NCS)2 (M = Co(II) and Ni(II)) (apohosts) were prepared by reacting M(NCS)2 (M = Co(II) and Ni(II)) and 5 in 1-butanol at 60 °C for 24 h. The Werner clathrates were prepared by reacting M(NCS)2 (M = Co(II) and Ni(II)), G and 5 in 1-butanol at 60 °C for 48-96 h. The clathrates were observed to transform to the apohost ML4(NCS)2 upon heating. CoL4(NCS)2·2NB was subsequently regenerated by exposing CoL4(NCS)2 to liquid NB at 60 °C for 48 h. This phase change occurred as a single-crystal to single-crystal phase transformation and was studied by single crystal X-ray diffraction, powder X-ray diffraction and thermal analyses. Structural analyses of the apohost CoL4(NCS)2 and its Werner clathrate CoL4(NCS)2·2NB indicated that rotational freedom of the Co-N bonds together with torsional flexibility of the ligand between the imide bond and the pyridine moiety are key to enabling the structural switching induced by exposure to NB or its removal.

Influence of the Coligand onto the Magnetic Anisotropy and the Magnetic Behavior of One-Dimensional Coordination Polymers

Reaction of Co(NCS)₂ with different coligands leads to the formation of three compounds with the general composition [Co(NCS)₂(L)₂]_n (L = aniline (1), morpholine (2), and ethylenethiourea (3)). In all of these compounds the cobalt(II) cations are octahedrally coordinated by two trans thiocyanate N and S atoms and the apical donor atoms of the coligands and are linked into linear chains by pairs of anionic ligands. The magnetic behavior was investigated by a combination of static and dynamic susceptibility as well as specific-heat measurements, computational studies, and THz-EPR spectroscopy. All compounds show antiferromagnetic ordering as observed for similar compounds with pyridine derivatives as coligands. In contrast to the latter, for 1-3 significantly higher critical temperatures and no magnetic single-chain relaxations are observed, which can be traced back to stronger interchain interactions and a drastic change in the magnetic anisotropy of the metal centers. These results are discussed and compared with those of the pyridine-based compounds, which provides important insights into the parameters that govern the magnetic behavior of such one-dimensional coordination polymers.

Variation of the Chain Geometry in Isomeric 1D Co(NCS)2 Coordination Polymers and Their Influence on the Magnetic Properties

Two different isomers of [Co(NCS)₂(4-chloropyridine)₂]_n (3C and 3L) were synthesized from solution and by thermal decomposition of Co(NCS)₂(4-chloropyridine)₂(H₂O)₂ (2), which show a different metal coordination leading to corrugated chains in 3C and to linear chains in 3L. Solvent mediated conversion experiments prove that 3C is thermodynamically stable at room temperature where 3L is metastable. Magnetic measurements reveal that the magnetic exchange in 3L is comparable to that observed for previously reported related chain compounds, whereas in 3C with corrugated chains, the ferromagnetic interaction within the chains is strongly suppressed. The magnetic ordering takes place at 2.85 and 0.89 K, for 3L and 3C, respectively, based on specific heat measurements. For 3L the field dependence of magnetic relaxations in antiferromagnetically ordered ferromagnetic chains is presented. In addition, 3L is investigated by FD-FT THz-EPR spectroscopy, revealing a ground to first excited state energy gap of 14.0 cm^-1. Broken-symmetry DFT calculations for 3C and 3L indicate a ferromagnetic intrachain interaction. Ab initio CASSCF/CASPT2/RASSI-SO computational studies reveal significantly different single-ion anisotropies for the crystallographically independent cobalt(II) centers in 3C and 3L. Together with the geometry of the chains this explains the magnetic properties of 3C and 3L. The ab initio results also explain the weaker exchange interaction in 3C and 3L as compared to previously reported [Co(NCS)₂(L)₂]_n compounds with linear chains.

Single-Chain Magnet Based on Cobalt(II) Thiocyanate as XXZ Spin Chain

The cobalt(II) in [Co(NCS)2 (4-methoxypyridine)2 ]n are linked by pairs of thiocyanate anions into linear chains. In contrast to a previous structure determination, two crystallographically independent cobalt(II) centers have been found to be present. In the antiferromagnetic state, below the critical temperature (Tc =3.94 K) and critical field (Hc =290 Oe), slow relaxations of the ferromagnetic chains are observed. They originate mainly from defects in the magnetic structure, which has been elucidated by micromagnetic Monte Carlo simulations and ac measurements using pristine and defect samples. The energy barriers of the relaxations are Δτ1 =44.9(5) K and Δτ2 =26.0(7) K for long and short spin chains, respectively. The spin excitation energy, measured by using frequency-domain EPR spectroscopy, is 19.1 cm-1 and shifts 0.1 cm-1 due to the magnetic ordering. Ab initio calculations revealed easy-axis anisotropy for both CoII centers, and also an exchange anisotropy Jxx /Jzz of 0.21. The XXZ anisotropic Heisenberg model (solved by using the density renormalization matrix group technique) was used to reconcile the specific heat, susceptibility, and EPR data.

Thermodynamically stable and metastable coordination polymers synthesized from solution and the solid state

Different Fe(ii) and Cd(ii) thiocyanate coordination compounds with unusual topology including isomeric modifications were synthesized with 4-picoline and investigated in regard to their thermodynamic relations.

Crystal structure of pyridinium tetra-iso-thio-cyanato-dipyridine-chromium(III) pyridine monosolvate

In the crystal structure of the title compound, (C5H6N)[Cr(NCS)4(C5H5N)2]·C5H5N, the CrIII ions are octa-hedrally coordinated by four N-bonding thio-cyanate anions and two pyridine ligands into discrete negatively charged complexes, with the CrIII ion, as well as the two pyridine ligands, located on crystallographic mirror planes. The mean planes of the two pyridine ligands are rotated with respect to each other by 90°. Charge balance is achieved by one protonated pyridine mol-ecule that is hydrogen bonded to one additional pyridine solvent mol-ecule, with both located on crystallographic mirror planes and again rotated by exactly 90°. The pyridinium H atom was refined as disordered between both pyridine N atoms in a 70:30 ratio, leading to a linear N-H⋯N hydrogen bond. In the crystal, discrete complexes are linked by weak C-H⋯S hydrogen bonds into chains that are connected by additional C-H⋯S hydrogen bonding via the pyridinium cations and solvent mol-ecules into layers and finally into a three-dimensional network.

Slow Magnetic Relaxation, Antiferromagnetic Ordering, and Metamagnetism in MnII (H2 dapsc)-FeIII (CN)6 Chain Complex with Highly Anisotropic Fe-CN-Mn Spin Coupling

Reactions of [Mn(H₂ dapsc)Cl₂ ]⋅H₂ O (dapsc=2,6- diacetylpyridine bis(semicarbazone)) with K₃ [Fe(CN)₆ ] and (PPh₄ )₃ [Fe(CN)₆ ] lead to the formation of the chain polymeric complex {[Mn(H₂ dapsc)][Fe(CN)₆ ][K(H₂ O)_3.5 ]}_n ⋅1.5n H₂ O (1) and the discrete pentanuclear complex {[Mn(H₂ dapsc)]₃ [Fe(CN)₆ ]₂ (H₂ O)₂ }⋅4 CH₃ OH⋅3.4 H₂ O (2), respectively. In the crystal structure of 1 the high-spin [Mn^II (H₂ dapsc)]²⁺ cations and low-spin hexacyanoferrate(III) anions are assembled into alternating heterometallic cyano-bridged chains. The K⁺ ions are located between the chains and are coordinated by oxygen atoms of the H₂ dapsc ligand and water molecules. The magnetic structure of 1 is built from ferrimagnetic chains, which are antiferromagnetically coupled. The complex exhibits metamagnetism and frequency-dependent ac magnetic susceptibility, indicating single-chain magnetic behavior with a Mydosh-parameter φ=0.12 and an effective energy barrier (U_eff /k_B ) of 36.0 K with τ₀ =2.34×10^-11  s for the spin relaxation. Detailed theoretical analysis showed highly anisotropic intra-chain spin coupling between [Fe^III (CN)₆ ]^3- and [Mn^II (H₂ dapsc)]²⁺ units resulting from orbital degeneracy and unquenched orbital momentum of [Fe^III (CN)₆ ]^3- complexes. The origin of the metamagnetic transition is discussed in terms of strong magnetic anisotropy and weak AF interchain spin coupling.

Crystal structure, synthesis and thermal properties of tetra-kis-(4-benzoyl-pyridine-κN)bis-(iso-thio-cyanato-κN)iron(II)

The asymmetric unit of the title compound, [Fe(NCS)2(C12H9NO)4], consists of an FeII ion that is located on a centre of inversion, as well as two 4-benzoyl-pyridine ligands and one thio-cyanate anion in general positions. The FeII ions are coordinated by two N-terminal-bonded thio-cyanate anions and four 4-benzoyl-pyridine ligands into discrete complexes with a slightly distorted octa-hedral geometry. These complexes are further linked by weak C-H⋯O hydrogen bonds into chains running along the c-axis direction. Upon heating, this complex loses half of the 4-benzoyl-pyridine ligands and transforms into a compound with the composition Fe(NCS)2(4-benzoyl-pyridine)2, that might be isotypic to the corresponding MnII compound and for which the structure is unknown.

Tuning of the exchange interaction and the Curie temperature by mixed crystal formation of the bridging anionic ligands

Mixed crystals with the composition [Co(NCS)x(NCSe)2-x(pyridine)2]n were prepared from solution and by annealing of Co(NCS)x(NCSe)2-x(pyridine)4. With increasing selenocyanate content, an increase of the magnetic exchange constant and of the critical temperature (Curie temperature) is observed, which offers a rational route to control these parameters in detail, without changing the metal cations.

Crystal structure of bis(4-benzoyl-pyridine-κN)bis(methanol-κO)bis(thio-cyanato-κN)nickel(II) methanol monosolvate

The asymmetric unit of the title compound, [Ni(NCS)2(C12H9NO)2(CH3OH)2]·CH3OH, comprises one NiII cation, two thio-cyanate anions, two 4-benzoyl-pyridine coligands, two coordinating, as well as one non-coordinating methanol mol-ecule. The NiII cation is coordinated by two terminally N-bonded thio-cyanate anions, the N atoms of two 4-benzoyl-pyridine coligands and the O atoms of two methanol ligands within a slightly distorted octa-hedron. Individual complexes are linked by inter-molecular O-H⋯S hydrogen bonding into chains parallel to [010] that are further connected into layers parallel to (10) by C-H⋯S hydrogen bonds. Additional C-H⋯O hydrogen-bonding inter-actions lead to the formation of a three-dimensional network that limits channels extending parallel to [010] in which the non-coordinating methanol mol-ecules are located. They are hydrogen-bonded to the coordinating methanol mol-ecules. X-ray powder diffraction revealed that the compound could not be prepared as a pure phase.

Fluorescence sensing and magnetic properties of three coordination polymers based on 6-(3,5-dicarboxylphenyl)nicotinic acid and pyridine/imidazole linkers

Three new coordination polymers (CPs) have been synthesized under hydrothermal conditions. Furthermore, the magnetic properties of 1 and 2 and the fluorescence properties of 3 were also investigated.

Highly selective C2H2 and CO2 capture and magnetic properties of a robust Co-chain based metal–organic framework

A robust Co-MOF based on uncommon 1D alternate Co₄ chain units was synthesized, which efficiently takes up C₂H₂ and CO₂ with significant selectivity for C₂H₂ and CO₂ over CH₄, as well as shows a slow freezing process of magnetic behavior.

Formation of di- and polynuclear Mn(II) thiocyanate pyrazole complexes in solution and in the solid state

Reaction of Mn(NCS)2 with pyrazole leads to the formation of three compounds with the compositions Mn(NCS)2(pyrazole)4 (1), [Mn(NCS)2]2(pyrazole)6 (2) and Mn(NCS)2(pyrazole)2 (3). Compound 1, already reported in the literature, consists of discrete complexes, in which the Mn(II) cations are octahedrally coordinated by four pyrazole ligands and two terminally N-bonded thiocyanate anions. In compound 2 each of the two Mn(II) cations are coordinated octahedrally by three pyrazole ligands and one terminal as well as two bridging thiocyanate anions, which link the metal cations into dimers. In compound 3 also octahedrally coordinated Mn(II) cations are present but they are linked into chains via centrosymmetric pairs of μ-1,3-bridging thiocyanate anions. Upon heating compound 1 loses the pyrazole co-ligands stepwise and is transformed into the chain compound 3 via the dimer 2 that is formed as an intermediate. Magnetic measurements on compounds 2 and 3 reveal dominating antiferromagnetic interactions, as already observed for 1D Mn(NCS)2 coordination compounds with pyridine based co-ligands.

Synthesis, crystal structure and properties of Cd(NCS)2 coordination compounds with two different Cd coordination modes

Reaction of Cd(NCS)2 with 4-methoxypyridine leads to the formation of four new compounds, of which one crystallizes in two different polymorphs. In Cd(NCS)2(4-methoxypyridine)4·(4-methoxypyridine)2 (1) and Cd(NCS)2(4-methoxypyridine)4 (2-I and 2-II) discrete complexes are found, in which the Cd cations are octahedrally coordinated by four 4-methoxypyridine co-ligands and two terminally N-bonded thiocyanate anions. For the polymorphs 2-I and 2-II no single crystals are available and therefore, the corresponding Mn(II) compound (2-I-Mn) was prepared, which is isotypic to 2-I, as proven by a Rietveld refinement. The crystal structure of 2-II was solved and refined from XRPD data. In [Cd(NCS)2(4-methoxypyridine)2] n (3), the Cd cations are also octahedrally coordinated but linked into linear chains by pairs of thiocyanate anions with all ligands in trans-position. {[Cd(NCS)2]3(4-methoxypyridine)5} n (4) also consists of chains but two different Cd coordination modes are observed. Two of the three crystallographically independent Cd cations show an octahedral coordination with a trans- or cis-arrangement of the N and S atoms of the anionic ligands, whereas the third one is in a distorted square-pyramidal coordination, with cis-coordination of the thiocyanate N and S atoms. Measurements using simultaneous thermogravimetry and differential scanning calorimetry of 2-I and 2-II show different heating rate dependent mass steps, in which the co-ligands are removed. In some of the residues obtained after the respective TG steps compound 3 was detected but no phase pure samples could be obtained.

Crystal structures of (aceto-nitrile-κN)tris-(pyridine-4-thio-amide-κN)bis-(thio-cyanate-κN)cobalt(II) aceto-nitrile disolvate and tetra-kis-(pyridine-4-thio-amide-κN)bis-(thio-cyanate-κN)nickel(II) methanol penta-solvate

Reaction of Co(NCS)2 or Ni(NCS)2 with pyridine-4-thio-amide in different solvents led to the formation of two compounds with composition [Co(NCS)2(C2H3N)(C6H6N2S)3]·2CH3CN (1) and [Ni(NCS)2(C6H6N2S)4]·5CH3OH (2), respectively. The asymmetric unit of compound 1 consists of one cobalt(II) cation, two thio-cyanate anions, three pyridine-4-thio-amide ligands, one coordinating and two solvate aceto-nitrile mol-ecules. One of the two aceto-nitrile solvate mol-ecules is disordered over two sets of sites in a 0.62:0.38 ratio. The asymmetric unit of compound 2 comprises of one nickel(II) cation, two thio-cyanate anions, four N-bonding pyridine-4-thio-amide ligands and five methanol solvate mol-ecules. In compound 1, the cobalt(II) cations are octa-hedrally coordinated into discrete complexes by two terminal N-bonding thio-cyanate anions, the N atoms of three pyridine-4-thio-amide ligands and one aceto-nitrile mol-ecule. Additional aceto-nitrile solvate mol-ecules are located between the complexes,. The complexes and solvate mol-ecules are linked via inter-molecular hydrogen bonding into a three-dimensional framework. In compound 2, the nickel(II) cations are likewise octa-hedrally coordinated by two terminal N-bonded thio-cyanate anions and four N-bonding pyridine-4-thio-amide ligands into discrete complexes. From their arrangement cavities are formed, in which the methanol solvate mol-ecules are located. Again, the complexes and solvate mol-ecules are linked into a three-dimensional framework by inter-molecular hydrogen bonding.

Crystal structures of tetra-kis-(pyridine-4-thio-amide-κN)bis-(thio-cyanato-κN)cobalt(II) monohydrate and bis-(pyridine-4-thio-amide-κN)bis-(thio-cyanato-κN)zinc(II)

Reaction of Co(NCS)2 and Zn(NCS)2 with 4-pyridine-thio-amide led to the formation of compounds with composition [Co(NCS)2(C6H6N2S)4]·H2O (1) and [Zn(NCS)2(C6H6N2S)2] (2), respectively. The asymmetric unit of compound 1, consists of one cobalt(II) cation, two thio-cyanate anions, four 4-pyridine-thio-amide ligands and one water mol-ecule whereas that of compound 2 comprises one zinc(II) cation that is located on a twofold rotation axis as well as one thio-cyanate anion and one 4-pyridine-thio-amide ligand in general positions. In the structure of compound 1, the cobalt(II) cations are octa-hedrally coordinated by two terminal N-bonding thio-cyanate anions and by the N atoms of four 4-pyridine-thio-amide ligands, resulting in discrete and slightly distorted octa-hedral complexes. These complexes are linked into a three-dimensional network via inter-molecular N-H⋯S hydrogen bonding between the amino H atoms and the thio-cyanate S atoms. From this arrangement, channels are formed in which the water mol-ecules are embedded and linked to the host structure by inter-molecular O-H⋯S and N-H⋯O hydrogen bonding. In the structure of compound 2, the zinc(II) cations are tetra-hedrally coordinated by two N-bonding thio-cyanate anions and the N atoms of two 4-pyridine-thio-amide ligands into discrete complexes. These complexes are likewise connected into a three-dimensional network by inter-molecular N-H⋯S hydrogen bonding between the amino H atoms and the thio-amide S atoms.

Cd(II) and Zn(II) thiocyanate coordination compounds with 3-ethylpyridine: synthesis, crystal structures and properties

Reaction of Cd(NCS)2 and Zn(NCS)2 with 3-ethylpyridine leads to the formation of compounds of compositions M(NCS)2(3-ethylpyridine)4 (M=Cd, 1-Cd; Zn, 1-Zn) and M(NCS)2(3-ethylpyridine)2 (M=Cd, 2-Cd; Zn, 2-Zn). 1-Cd and 1-Zn are isotypic and form discrete complexes in which the metal cations are octahedrally coordinated by two trans-coordinating N-bonded thiocyanate anions and four 3-ethylpyridine co-ligands. In 2-Cd the cations are also octahedrally coordinated but linked into chains by pairs of μ-1,3-bridging anionic ligands. 2-Zn is built up of discrete complexes, in which the Zn cation is tetrahedrally coordinated by two N-bonded thiocyanate anions and two 3-ethylpyridine co-ligands. Compounds 1-Cd, 2-Cd and 2-Zn can be prepared in a pure state, whereas 1-Zn is unstable and transforms on storage into 2-Zn. If 1-Cd and 1-Zn are heated, a transformation into 2-Cd, respectively 2-Zn is observed. Luminescence measurements reveal that 1-Cd, 2-Cd and 2-Zn emit light in the blue spectral range with maxima at, respectively, 21724, 21654 and 22055 cm−1, assigned to ligand-based luminescence.

Static and dynamic magnetic properties of the ferromagnetic coordination polymer [Co(NCS)2(py)2]n

The static and dynamic properties of the Ising like chain ferromagnet are studied by magnetic measurements and high field-high frequency ESR spectroscopy.

Influence of metal coordination and co-ligands on the magnetic properties of 1D Co(NCS)2 coordination polymers

Two 1D Co(NCS)₂ coordination polymers were synthesized and their magnetic properties were investigated by susceptibility and specific heat measurements as well as DFT and ab initio calculations.

Synthesis, structures, magnetic, and theoretical investigations of layered Co and Ni thiocyanate coordination polymers

Two new ferromagnetic layered Co(ii) and Ni(ii) thiocyanate coordination polymers were synthesized, structurally characterized and investigated for their magnetic behavior using susceptibility measurements and theoretical methods.

Spin canting, metamagnetism, and single-chain magnetic behaviour in a cyano-bridged homospin iron(II) compound

Spin canting, antiferromagnetic ordering, metamagnetism and single-chain magnetism were verified in a cyano-bridged Fe(II) compound synthesized from the pentagonal bipyramidal Fe(II) starting material in the presence of excessive BF4(-) anions.

Synthesis, structure and properties of [Co(NCS)2(4-(4-chlorobenzyl)pyridine)2]n, that shows slow magnetic relaxations and a metamagnetic transition

[Co(NCS)₂(4-(4-chlorobenzyl)pyridine)₂]_n shows a metamagnetic behavior and slow relaxations of magnetization indicative of a single chain magnet behavior.