Tetrachloridometallate Dianion-Induced Cucurbit[8]uril Supramolecular Assemblies with Large Channels and Their Potential Applications for Extraction Coating on Solid-Phase Microextraction Fibers

Cucurbit[n]uril-Based Supramolecular Frameworks Assembled through Outer-Surface Interactions

Porous materials, especially metal-organic frameworks, covalent organic frameworks, and supramolecular organic frameworks, are widely used in heterogeneous catalysis, adsorption, and ion exchange. Cucurbit[n]urils (Q[n]s) suitable building units for porous materials because they possess cavities with neutral electrostatic potential, portal carbonyls with negative electrostatic potential, and outer surfaces with positive electrostatic potential, which may result in the formation of Q[n]-based supramolecular frameworks (QSFs) assembled through the interaction of guests within Q[n]s, the coordination of Q[n]s with metal ions, and outer-surface interaction of Q[n]s (OSIQ). This review summarizes the various QSFs assembled via OSIQs. The QSFs can be classified as being assembled by 1) self-induced OSIQ, 2) anion-induced OSIQ, and 3) aromatic-induced OSIQ. The design and construction of QSFs with novel structures and specific functional properties may establish a new research direction in Q[n] chemistry.

Preparation and adsorption properties of a facile solid cucurbit[8]uril-based porous supramolecular assembly

Cucurbit[8]uril (Q[8]) was used as the building block for the facile preparation of Q[8]-based supramolecular assemblies in aqueous HCl solutions (A). The Q[8]-based supramolecular assembly was constructed of Q[8] molecules held together through outer surface interactions of cucurbit[ n]urils, and hydrogen bonding between latticed water molecules and portal carbonyl oxygens of Q[8]. The porous structure resulted in different adsorption properties for different fluorophore guests (FGs), including dyes and fused-ring compounds, and fluorescence enhancement or colour changes resulted in luminescent materials (FG@As). Moreover, some of the FG@A systems could selectively respond to certain volatile organic compounds, for which they can be used as solid sensors.

Porous supramolecular assemblies and functional properties of perhydroxylated cucurbit[6]uril and polyoxometallates

(HO)₁₂Q[6] and POMs were used as basic building blocks, and interactions yielded two novel types of supramolecular assemblies at different HCl concentrations.

4-Sulfocalix[4]arene/Cucurbit[7]uril-Based Supramolecular Assemblies through the Outer Surface Interactions of Cucurbit[n]uril

Upon mixing of aqueous solutions of the freely soluble building blocks cucurbit[7]uril (Q[7]) and 4-sulfocalix[4]arene (SC[4]A), white microcrystals instantly separate in near-quantitative yield. The driving force for this assembly is suggested to be the outer-surface interaction of the Q[n]. Dynamic light scattering, scanning electron microscopy, and NMR (diffusion-ordered NMR spectroscopy) analyses have confirmed the supramolecular aggregation of Q[7] and SC[4]A. Titration ¹H NMR spectroscopy and isothermal titration calorimetry have shown that the interaction ratio of Q[7] and SC[4]A is close to 3:1. Moreover, the Q[7]/SC[4]A-based supramolecular assembly can accommodate molecules of some volatile compounds or luminescent dyes. Thus, this work offers a simple and highly efficient means of preparing adsorbent or solid fluorescent materials.

Cucurbit[6]uril-based multifunctional supramolecular assemblies: synthesis, removal of Ba(ii) and fluorescence sensing of Fe(iii)

Supramolecular assemblies formed of cucurbit[6]uril and flexible aromatic compounds were achieved via outer-surface interactions, and show selective adsorption and sensing properties.

Highly selective absorption of polychloromethanes in perhydroxylated cucurbit[6]uril-based supramolecular assemblies

Two perhydroxylated cucurbit[6]uril-based porous assemblies have been obtained by the crystallization of perhydroxylated cucurbit[6]uril {(HO)₁₂Q[6]} from aqueous HCl solutions of different concentrations, which exhibit highly selective absorption of polychloromethanes.

Multiple Efficient Fluorescence Emission from Cucurbit[10]uril-[Cd4Cl16]8--Based Pillared Diamond Porous Supramolecular Frameworks

Cucurbit[10]uril (Q[10] or CB[10]), with the largest rigid cavity (ca. 1.0 nm) yet characterized in the cucurbiturils family, and indeed among all artificial macrocyclic receptors to date, has been successfully exploited to construct a novel Q[10]-[Cd₄Cl₁₆]^8--based pillared diamond porous supramolecular framework. Single-crystal X-ray diffraction analysis revealed that the three-dimensional open-nanotube-type porous framework is constructed from free Q[10] molecules and [Cd₄Cl₁₆]^8- cluster anions through the outer surface interactions of Q[10]. Notably, the Q[10]-based porous framework host can accommodate guest dyes, such as rhodamine B (G1), pyrenemethanamine hydrochloride (G2), and bathocuproine hydrochloride (G3), to form solid materials with efficient red-green-blue (RGB) fluorescence. This work not only exemplifies a facile approach for the construction of macrocycle-based porous frameworks but also offers a simple, lower cost, yet still highly efficient means of preparing multi-emitting, including white-light-emitting, solid luminescent materials.

Pillar[5]arene-based supramolecular organic frameworks for highly selective CO2-capture at ambient conditions

Low-density, solid-state, porous supramolecular organic frameworks are constructed using pillarenes. The frameworks have a honeycomb-like structure, permanent porosity, high thermal stability, and selective and reversible sorption properties toward CO2. The exceptionally selective CO2-sorption properties (375/1, 339/1) of one framework over N2 and CH4 indicate potential applications in CO2-capture for post-combustion power plants and natural gas sweetening.

Self-assemblies based on the "outer-surface interactions" of cucurbit[n]urils: new opportunities for supramolecular architectures and materials

Supramolecular architectures and materials have attracted immense attention during the last decades because they not only open the possibility of obtaining a large variety of aesthetically interesting structures but also have applications in gas storage, sensors, separation, catalysis, and so on. On the other hand, cucurbit[n]urils (Q[n]s), a relatively new class of macrocyclic hosts with a rigid hydrophobic cavity and two identical carbonyl fringed portals, have attracted much attention in supramolecular chemistry. Because of the strong charge-dipole and hydrogen bonding interactions, as well as hydrophobic and hydrophilic effect derived from the negative portals and rigid cavities of Q[n]s, nearly all research in Q[n]s has been focused on utilizing the portals and cavities to construct supramolecular assemblies similar to other macrocyclic receptors such as cyclodextrin and calixarenes. Interestingly, a recent study revealed that other weak noncovalent interactions such as hydrogen bonding and π···π stacking, as well as C-H···π and ion-dipole interactions, could also be defined as "outer-surface interactions", which are derived from the electrostatically positive outer surface of Q[n]s. These interactions could be the driving forces in the formation of various novel Q[n]-based supramolecular architectures and functional materials. In this Account, we provide a comprehensive overview of supramolecular self-assemblies based on the outer-surface interactions of Q[n]s. These outer-surface interactions include those between Q[n]s, Q[n]s and aromatic molecules, Q[n]s and calixarenes, Q[n]s and inorganic complex ions, and Q[n]s and polyoxometalates. Pioneering work has shown that such weak noncovalent interactions play very important roles in the formation of various Q[n]-based functional materials and supramolecular architectures. For example, hydrogen bonds in outer-surface interactions between Q[n] molecules not only function as the sole driving force in the formation of one-dimensional Q[n] porous channels but also assist the bonding forces of the channels in capturing and accommodating acetylene molecules and carbon dioxide in the channel cavities. Moreover, upon introduction of a third species such as an aromatic molecule or inorganic anion into the Q[n]/metal system, "outer-surface interactions" could lead to Q[n]/metal-based self-assemblies from simple finite supramolecular coordination complexes to infinite polydimensional supramolecular architectures and other structures. Overall, this Account focuses on the novel self-assembly driving force derived from Q[n]s including (i) concepts of the outer-surface interactions of Q[n]s, (ii) providing plausible explanations of the mechanisms of the outer-surface interactions of Q[n]s, and (iii) introduction of an overview of the developments and practical applications of outer-surface interactions of Q[n]s in supramolecular chemistry. It is hoped that this study based on the outer-surface interactions of Q[n]s can enrich the field of molecular engineering of functional supramolecular systems and provide new opportunities for the construction of functional materials and architectures.

Separation performance of cucurbit[8]uril and its coordination complex with cadmium (II) in capillary gas chromatography

Here we report the investigation of using cucurbit[8]uril (CB8) and its coordination complex with cadmium (II) (CB8-Cd) as stationary phases for capillary gas chromatography (GC). The prepared capillary columns of CB8 and CB8-Cd stationary phases achieved column efficiency of 2200plates/m and 1508plates/m, respectively, and showed weak polarity based on the measured McReynolds constants. Their separation performance was investigated by GC separation of mixtures of different types while a commercial column was used for comparison. The CB8 stationary phase achieved high resolution for a wide range of analytes from nonpolar to polar while the CB8-Cd stationary phase exhibited good separation mainly for nonpolar to weak polar analytes. The CB stationary phases differ from the commercial one in terms of retention behaviors and resolving ability due to their different molecular interactions with analytes. Moreover, energy effect on the retention of analytes on CB8 and CB8-Cd stationary phases was examined, showing that retention on CB8 column was determined mainly by enthalpy change for polar analytes and by both enthalpy change and entropy change for weak polar analytes whereas retention on CB8-Cd column was mainly controlled by entropy change. This work demonstrates the great potential of CB8 and CB8-Cd stationary phases as a new type of GC stationary phases in GC analysis.