Phosphazene Based Multicentered Naked-Eye Fluorescent Sensor with High Selectivity for Fe3+ Ions

Design, Synthesis and Application of 1,4-disubstituted 1,2,3-triazole Based Chemosensors: A Promising Avenue

The 1,2,3-triazole-based chemosensors, synthesized through Cu(I)-catalyzed azide-alkyne cycloaddition via 'click chemistry', offer a straightforward yet highly effective method for detecting metal cations and anions with remarkable accuracy, selectivity and sensitivity, making them invaluable across various fields such as chemistry, pharmacology, environmental science and biology. The selective recognition of these ions is crucial due to their significant roles in biological and physiological processes, where even slight concentration variations can have major consequences. The article reviews literature from 2017 to 2024, highlighting advancements in the synthesis of 1,2,3-triazole-based ligands and their application (along with sensing mechanism) for detection of various ions causing health and environmental hazards. The detection aspects have been discussed sequentially for the transition-, inner transition-, and the metals from the s or p block of the periodic table.

Ferrocene Chalcone Enhanced Cyclotriphosphazene Photodiode Systems via Click Chemistry: Their Synthesis, Electrical, and Photophysical Properties

In this study, a new ferrocene-decorated cyclotriphosphazene compound (4) was obtained by the interaction of ferrocene chalcone with azide end groups (2) and spirophosphazene (3) bearing alkyne groups using the click method. The structures of all compounds were confirmed using Fourier transform infrared, 1H, 13C APT, and 31P NMR, and MS techniques. The optical band gaps of compounds were measured, showing values of 4.75 eV for 3, 3.53 eV for 2, and 3.46 eV for final product 4. The optical band gap of compound 4 calculated by density functional theory is 3.28 eV. The electrical properties of the compounds were investigated against the frequency. The results showed that the conduction mechanism is based on the hopping model. New types of diodes were prepared by using compounds 2 and 4. The current-voltage characteristics of the compound 4 diode showed good rectification behavior. The rectification ratio of the heterojunction diode was calculated as 629. The ideality factors were 3.35 for 2 and 7.57 for 4. The barrier heights were 0.68 and 0.92, respectively. Under sunlight (20-100 mW/cm2), both diodes exhibited photodiode properties, with compound 4 being more sensitive to light. This indicates that the diodes can be used in optoelectronic devices due to their photoconductive behavior.

Cyclotriphosphazene: A Versatile Building Block for Diverse Functional Materials

Cyclotriphosphazene (CP) is a cyclic inorganic compound with the chemical formula N3P3. This unique molecule consists of a six-membered ring composed of alternating nitrogen and phosphorus atoms, each bonded to two chlorine atoms. CP exhibits remarkable versatility and significance in the realm of materials chemistry due to its easy functionalization via facile nucleophilic substitution reactions in mild conditions as well as intriguing properties of resultant final CP-based molecules or polymers. CP has been served as an important building block for numerous functional materials. This review provides a general and broad overview of the synthesis of CP-based small molecules through nucleophilic substitution of hexachlorocyclotriphosphazene (HCCP), and their applications, including flame retardants, liquid crystals (LC), chemosensors, electronics, biomedical materials, and lubricants, have been summarized and discussed. It would be expected that this review would offer a timely summary of various CP-based materials and hence give an insight into further exploration of CP-based molecules in the future.

Easily synthesizable molecular probe for the nanomolar level detection of Cd2+ in near aqueous media: Theoretical investigations and live cell imaging

The present investigation highlights a quinoline-based small molecule probe (DEQ) for the detection of Cd2+ among other metal ions in near-aqueous media. The probe DEQ and its Cd2+ complex (DEQ-Cd) have been synthesized and characterized by all possible spectroscopic methods. The weakly emissive DEQ showed its strong emission in the presence of Cd2+, which is attributed to the photoinduced electron transfer (PET) along with the chelation-enhanced fluorescence (CHEF) mechanism. The 1:1 binding mode between ligand and Cd2+ is confirmed by single crystal XRD analysis, which is further supported by Job's plot and HRMS. The detection limit of the probe to recognize Cd2+ was found to be as low as 89 nM. Furthermore, DEQ can act as a reversible fluorescence probe with the off-on-off mechanism by the alternative addition of Cd2+ and EDTA. DFT and TD-DFT studies exposed the proposed mechanism after Cd2+ insertion and the obtained results for electronic spectra are in line with the experimental results. The response towards pH was quite interesting and allowed us to study its application in live cell imaging. With all the positive results, the proposed ligand DEQ can be used as a potential probe for the detection of Cd2+ in real-life applications.

Fluorescent copper conjugated curcumin cysteine nanoprobe for selective determination of Fe3+ and G-quadruplex DNA

The synthesis of fluorescent copper-curcumin-cysteine (Cu-CC) as a sensing platform is reported. The synthesized probe has been confirmed by UV-visible spectroscopy, FT-IR, XRD, SEM, and TEM characterization techniques, respectively. The mechanistic aspects of selective sensing of Fe³⁺ and detection of different G-quadruplex DNA have been illustrated based on the "turn-off-on" concept of a regeneratable fluorescence sensing probe at λ_ex 450 nm. Interestingly, we have noticed a high selectivity to Fe³⁺ ion by the developed Cu-CC sensing probe in comparison with other metal ions. Furthermore, the restoration of fluorescence of the sensing probe in the presence of different DNA sequences is illustrating a cost-effective, convenient, and reliable detection methodology of DNA detection. It is highly sensitive for the determination of Pu27, promoter c-MYC quadruplex DNA in a wide linear range of 100-700 nM having a detection limit of 13.1 nM (RSD: 0.15%) and sensitivity of 37.2 cps/nM. Whereas, the Pu18 and H-telo telomeric DNA sequences are showing a narrow linear range, i.e., 10 nM-200 nM and 10 nM-180 nM, respectively. The real-world sample analysis performance of the regeneratable sensing probe for Pu27 DNA detection in fresh human blood serum samples is showing a satisfactory result.

Real time sensor for Fe3+, Al3+, Cu2+ & PPi through quadruple mechanistic pathways using a novel dipodal quinoline-based molecular probe

A quinoline-based small molecular probe, H₂L was designed, synthesized and characterized by different spectroscopic methods. It was utilized as a multi-responsive probe for the detection of Fe³⁺, Al³⁺, Cu²⁺ and PPi. It showed very selective instant turn-on fluorimetric response towards Fe³⁺and Al³⁺ with a detection limit in nanomolar range. Solutions of H₂L containing Fe³⁺ or Al³⁺ could sequentially sense PPi by a turn-off mechanism. Also, H₂L could determine the presence of Cu²⁺ very selectively among a series of other metal ions by a sharp change in colour. Detection of Cu²⁺ through colorimetry was further investigated by systematic UV-Vis studies and the potential of H₂L to act as a potential colorimetric sensor for Cu²⁺ was suitably established. Filter-paper strip experiments were conducted to demonstrate the practical utility of the proposed sensor. Potential applications of H₂L as a sensor for pH in the acidic range has also been explored.

Electrochemical process of early-stage corrosion detection based on N-doped carbon dots with superior Fe3+ responsiveness

Iron corrosion is a subject of great technological importance and extensive public concern. However, the highly efficient detection of iron corrosion at early stage is still a challenging task. Herein, bright fluorescent carbon dots (CDs) with superior response to Fe³⁺ were prepared by simple solvothermal process based on citric acid and ammonia. The obtained CDs are able to rapidly, sensitively and selectively respond to Fe³⁺. The quantitative analysis showed that the CDs exhibited a linear response to Fe³⁺ in the range of 10 to 300 µM, with a detection limit of 0.9 μM. And the fluorescence quenching of CDs was obvious enough to be detected by the naked eyes. Such promising responsiveness of CDs offers a great opportunity for real-time and visual detection of Fe³⁺ during electrochemical corrosion process. In addition, due to the excellent stability and solubility of CDs, patterned papers and hydrogels have been fabricated utilizing cellulose and PVA as matrices. The as-prepared biocompatible, environmental-friendly and disposable CDs based fluorescent materials were successfully used for detecting the degree of iron corrosion. This could provide a simple and visual strategy for monitoring the safety of structural metal materials.

A novel [1,2,4]triazolo[1,5-a]pyrimidine derivative as a fluorescence probe for specific detection of Fe3+ ions and application in cell imaging

The detection of metal ions is of particular importance for monitoring environmental pollution and life metabolic activities. However, it is still a challenge to achieve Fe³⁺ detection with specific sensitivity and rapid response, especially in the presence of chelating agents for Fe³⁺ ions. Herein, a novel fluorescence probe for Fe³⁺, i.e., amide derivative of [1,2,4]triazolo[1,5-a] pyrimidine (TP, Id), was synthesized, featuring specific Fe³⁺ selectivity, rapid quenching (5 s), low limit of detection (0.82 μM), good permeability and low cytotoxicity. More importantly, Id can be used to identify and detect Fe³⁺ in the presence of existing strong chelating agents (e.g., EDTA) for Fe³⁺ ions. The results show that the as-synthesized fluorescence probe is particularly suitable as a bioimaging reagent to monitor intracellular Fe³⁺ in living HeLa cells. Furthermore, we proposed the binding mode for Id with Fe³⁺ ions and the light-emitting mechanism through high-resolution mass spectra and density function theory calculations, respectively. An Id-based test paper can be used to rapidly identify Fe³⁺. These results are expected to improve the development of new sensitive and specific fluorescent sensors for Fe³⁺.

"Turn-on" benzophenone based fluorescence and colorimetric sensor for the selective detection of Fe2+ in aqueous media: Validation of sensing mechanism by spectroscopic and computational studies

A diaminobenzophenone Schiff base derived probe 1, was synthesized and structure elucidation was carried out by spectroscopic studies viz., FT-IR, UV-vis, ¹H, and ¹³C NMR and mass spectrometry. The sensing phenomenon with different metal ions (Cr³⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺) was investigated by employing absorption and fluorescence titrations, which demonstrated that probe 1 exhibited selective fluorescent sensing behavior towards Fe²⁺ ion among various other metal ions. The porobes selceteclivity towards Fe²⁺ was also examined by colorimetric assay which revealed a change in the color from light yellow to brown upon addition of Fe²⁺ ion. A remarkable increase in the fluorescence intensity of probe 1 was observed towards Fe²⁺ ion, which was found to be associated with the inhibition of photoinduced electron-transfer (PET) and CN isomerization processes, respectively. The chemosensor exhibited an association constant value of 6.173 × 10⁷ M^-2 as determined by using non-linear least square fit data. Job's plot calculated the binding stoichiometry, and the sensing phenomenon of Fe²⁺ towards the probe was further supported by Density Functional Theory (DFT) calculations and ¹H NMR studies. The detection limit of probe 1 was found to be 0.0363 µM, which is below the permissible limits according to the WHO guideline (5 μM) for Fe²⁺ ions in the drinking water. Furthermore, the practical application of probe 1 was studied by analyzing the content of Fe²⁺ in different water samples.

TICT fluorescent probe for Al3+: Sequential detection of PPi, ATP and ADP in semi-aqueous medium and real-life applications

A ditopic Schiff base ligand, H₂L has been synthesized and characterized by all spectroscopic techniques. It is highly selective and specific towards Al³⁺ in semi aqueous medium (DMF/H₂O mixture) by exhibiting a drastic increase in the fluorescence intensity. The emission studies, spectroscopic data, life time and quantum yield results have been used to understand its binding mode, explore its specificity and establish its efficacy. The intensity difference is remarkable in physiological pH range. Due to its reversible behavior this ditopic fluorescent chemosensor can be used multiple times to make it cost effective. Detection limit for this chemosensor was found to be 0.65 μM. Experiments with TLC plates show that it can be used as a practical and portable sensor for studying environmental samples in real life. The L-Al³⁺ complex generated in the solution acts as a sensor to sequentially detect pyrophosphate groups present in inorganic pyrophosphates, ATP and ADP among other anions by turning off the fluorescence. Inhibit logic gate and its corresponding truth table has been developed to aid in further exploiting its multidimensional applications.

A novel polythioether-based rhodamine B fluorescent probe via successive click reaction and its application in iron ion detection and cell imaging

Polythioether has good chemical stability and biocompatibility and is a kind of promising polymers for the application of optical materials, medical materials and energy conversion materials. However, the fluorescent probe based on polythioether is still rare. Herein, a series of polythioether based polymer fluorescent probes were synthesized by successive thiol click reaction under ultraviolet light at room temperature. The poly(thioether)s have good selectivity and responsiveness to iron ions and can be applied in cell imaging, which indicate that the broad application prospects of polythioether-based fluorescent probes in ion detection and bioimaging.

Ethanol-Precipitation-Assisted Highly Efficient Synthesis of Nitrogen-Doped Carbon Quantum Dots from Chitosan

Nitrogen-doped carbon quantum dots (NCQDs) were prepared from chitosan through a hydrothermal reaction. When ethanol precipitation was used as the purification method, a high product yield of 85.3% was obtained. A strong blue fluorescence emission with a high quantum yield (QY) of 6.6% was observed from the NCQD aqueous solution. Physical and chemical characteristics of the NCQDs were carefully investigated by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), Raman spectra, X-ray photoelectron spectroscopy (XPS), and transient fluorescence spectra. Experimental results showed that diameters of the NCQDs were in the range of 2-10 nm. The carbon quantum dots possess good water dispersibility and precipitation by ethanol. When used for metal ion detection, the detection limit of the NCQDs for Fe3+ was as low as 1.57 μM. This work proposed a facile method to synthesize NCQDs from chitosan with high yield and demonstrated that carbon quantum dots derived from chitosan were promising for ion detection.

Optical Detection of Fe3+ Ions in Aqueous Solution with High Selectivity and Sensitivity by Using Sulfasalazine Functionalized Microgels

A highly selective and sensitive optical sensor was developed to colorimetric detect trace Fe³⁺ ions in aqueous solution. The sensor was the sulfasalazine (SSZ) functionalized microgels (SSZ-MGs), which were fabricated via in-situ quaternization reaction. The obtained SSZ-MGs had hydrodynamic radius of about 259 ± 24 nm with uniform size distribution at 25 °C. The SSZ-MG aqueous suspensions can selectively and sensitively response to Fe³⁺ ions in aqueous solution at 25 °C and pH of 5.6, which can be quantified by UV-visible spectroscopy and also easily distinguished by the naked eye. Job’s plot indicated that the molar binding ratio of SSZ moiety in SSZ-MGs to Fe³⁺ was close to 1:1 with an apparent association constant of 1.72 × 10⁴ M⁻¹. A linear range of 0–12 μM with the detection limit of 0.110 μM (0.006 mg/L) was found. The obtained detection limit was much lower than the maximum allowance level of Fe³⁺ ions in drinking water (0.3 mg/L) regulated by the Environmental Protection Agency (EPA) of the United States. The existence of 19 other species of metal ions, namely, Ag⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Ba²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Pb²⁺, Zn²⁺, Cd²⁺, Co²⁺, Cr³⁺, Yb³⁺, La³⁺, Gd³⁺, Ce³⁺, and Bi³⁺, did not interfere with the detection of Fe³⁺ ions.

Rhodamine-azobenzene based single molecular probe for multiple ions sensing: Cu2+, Al3+, Cr3+ and its imaging in human lymphocyte cells

A photoinduced electron transfer (PET) and chelation-enhanced fluorescence (CHEF) regulated rhodamine-azobenzene chemosensor (L) was synthesized for chemoselective detection of Al³⁺, Cr³⁺, and Cu²⁺ by UV-Visible absorption study whereas Al³⁺ and Cr³⁺ by fluorimetric study in EtOH-H₂O solvent. L showed a clear fluorescence emission enhancement of 21 and 16 fold upon addition of Al³⁺ and Cr³⁺ due to the 1:1 host-guest complexation, respectively. This is first report on rhodamine-azobenzene based Cr³⁺ chemosensor. The complex formation, restricted imine isomerization, inhibition of PET (photo-induced electron transfer) process with the concomitant opening of the spirolactam ring induced a turn-on fluorescence response. The higher binding constants 6.7 × 10³ M^-1 and 3.8 × 10³ M^-1 for Al³⁺ and Cr³⁺, respectively and lower detection limits 1 × 10^-6 M and 2 × 10^-6 M for Al³⁺ and Cr³⁺, respectively in a buffered solution with high reversible nature describes the potential of L as an effective tool for detecting Al³⁺ and Cr³⁺ in a biological system with higher intracellular resolution. Finally, L was used to map the intracellular concentration of Al³⁺ and Cr³⁺ in human lymphocyte cells (HLCs) at physiological pH very effectively. Altogether, our findings will pave the way for designing new chemosensors for multiple analytes and those chemosensors will be effective for cell imaging study.

On-off-on relay fluorescence recognition of ferric and fluoride ions based on indicator displacement in living cells

A new boronic acid derivative functionalized with a 4-(3-(4-(4,5-diphenyl-1H-imidazole-2-yl)phenyl)-1,2,4-oxadiazol-5-yl)phenyl (IOP) moiety was synthesized for use as a sequential "on-off-on"-type relay fluorescence probe for Fe³⁺ ions and F^- ions with high selectivity and sensitivity under physiological conditions. The introduction of Fe³⁺ to IOP boronic acid (IOPBA) formed an Fe³⁺IOPBA complex, which led to quenching of the blue fluorescence intensity at 458 nm. The lowest-energy conformation of IOPBA was theoretically predicted to adopt an extended structure, and the Fe³⁺ ion in the Fe³⁺IOPBA complex was coordinated to two phenyl groups to form a π-complex. Upon addition of F^- to the Fe³⁺IOPBA complex, the original fluorescence was recovered due to formation of [FeF₆]^3‒, resulting in "on-off-on"-type sensor behavior. IOPBA showed high selectivity towards Fe³⁺ among other cations. Moreover, the Fe³⁺IOPBA complex showed specific selectivity towards F^-, with other cations and anions not interfering with detection. Both sensing processes showed 1:1 stoichiometry with binding constants of 6.87 × 10⁶ and 4.49 × 10⁶ mol^-1 L for Fe³⁺ with IOPBA and F^- with Fe³⁺IOPBA, respectively. The limits of detection for Fe³⁺ and F^- were 10 and 1 nM, respectively. The proposed method was successfully applied in real water samples. Furthermore, the probe had low cytotoxicity and was successfully used as a bioimaging reagent to detect intracellular Fe³⁺ and F^- in living HeLa cells.

A Highly Selective "Turn-on" Fluorescent Probe for Detection of Fe3+ in Cells

A new "turn-on" fluorescent probe Py based on rhodamine and piperonaldehyde was designed and synthesized for detecting Fe³⁺ in cells. The free probe Py was non-fluorescent. While only upon addition of Fe³⁺, the significant increase of the fluorescence and color were observed which could be visible directly by "naked-eye". The probe Py shows high selectivity and sensitivity for Fe³⁺ over other common metal ions in EtOH-H₂O (3/2, v/v) mixed solution. The association constant and the detection limit were calculated to be 4.81 × 10⁴ M^-1 and 1.18 × 10^-8 mol/L respectively. The introduction of piperonaldehyde unit could increase probe rigidity which could enhance its optical properties. Meanwhile, the binding mode between Py and Fe³⁺ was found to be a 1:1 complex formation. The density functional theory (DFT) calculations were performed which would further confirm the recognition mechanism between probe Py and Fe³⁺. In addition, the probe has been proved to be reversible for detecting Fe³⁺. Moreover, the probe Py was used to detect Fe³⁺ in cells successfully.

Synthesis and anticancer activity of cyclotriphosphazenes functionalized with 4-methyl-7-hydroxycoumarin

The synthesis of three cyclotriphosphazenes derivatives bearing 4-methyl-7-hydroxycoumarin moieties with the numbers of 2, 4, or 6 were reported, and their antitumor activities were test.

Constitutional isomers of dendrimer-like pyrene substituted cyclotriphosphazenes: synthesis, theoretical calculations, and use as fluorescence receptors for the detection of explosive nitroaromatics

Two constitutionally isomeric bis-pyrenyl phenol dendrons (4 and 6) and their dendrimer-like cyclotriphosphazene derivatives (5 and 7) are designed, synthesized and fluorescence detection behaviors are evaluated for nitro aromatic compounds (NACs).

New hexa-bodipy functionalized dendrimeric cyclotriphosphazene conjugates as highly selective and sensitive fluorescent chemosensor for Co2+ ions

In the study, the new hexa-bodipy functionalized dendrimeric cyclotriphosphazene conjugates (HBCP 1 and 2) have been successfully synthesized and characterized by using general spectroscopic techniques such as ¹H, ¹³C and ³¹P NMR spectroscopies. The photophysical and metal sensing properties in THF solutions of dendrimeric cyclotriphosphazene conjugates (HBCP 1 and 2) were investigated by UV-Vis and fluorescence spectroscopies in dilute tetrahydrofuran solutions. These dendrimers showed strong absorption bands 501 and 641nm at low concentration with high molar extinction coefficients. In addition, the stoichiometry of the complex between the conjugate (HBCP 2) and Co²⁺ ions were determined by a Job's plot obtained from fluorescence titrations. The metal sensing data showed that the hexa-bodipy functionalized dendrimeric cyclotriphosphazene conjugate (HBCP 2) is a candidate for fluorescent chemosensor for Co²⁺ ions due to showing high selectivity with a low limit of detection.