Highly Selective Phosphorescent Chemosensor for Fluoride Based on an Iridium(III) Complex Containing Arylborane Units

Organoplatinum Complex Exhibiting Aggregation-Enhanced Emission (AEE) and Dual-Channel Ion-Sensing Properties by Terminating the Molecular Configuration Transformation (MCT) and Excited-State Intramolecular Proton Transfer (ESIPT)

Emitters produce weak emissions when they undergo structural changes such as molecular configuration transformation (MCT) or excited-state intramolecular proton transfer (ESIPT) but give out strong emissions after terminating these distortions. Herein, an organoplatinum complex, Pt-ppy-ABP, carrying a salicylaldehyde-based Schiff base unit is synthesized. It exhibits weak emission in dilute solutions but shows bright emission at the aggregated state or after interacting with F- and Zn2+. This suggests that it has an aggregation-enhanced emission (AEE) property and holds potential in ion detection. Supported by theoretical calculations and femtosecond transient absorption results, this complex suffers excited-state structural changes including MCT from a square-planar configuration to a tetrahedral one, as well as intramolecular rotation of a monodentate ligand and ESIPT, showing weak emission in its solutions. At the aggregated state, it releases strong yellow emissions because of the restraints of MCT and ligand rotation. Upon interacting with F- or Zn2+, it emits bright-red or -green emissions, achieving detection limits of 10-7 M. The sensing mechanism is concluded as deprotonation- and coordination-induced ESIPT terminations, respectively. Given its AEE property and ion-responsive emissions, its application in information encryption is also explored. Finally, these findings should provide valuable clues for the developments of chemosensors with dual-channel recognition abilities.

New type of tin(IV) complex based turn-on fluorescent chemosensor for fluoride ion recognition: elucidating the effect of molecular structure on sensing property

A novel type of chemosensor based on tin(IV) complexes incorporating hydroxyquinoline derivatives has been designed and investigated for selectively detecting fluoride ions. Sn(meq)2Cl2 (meq = 2-methyl-8-quinolinol) (complex 1) exhibits a significant enhancement in luminescence upon the introduction of fluoride ions. This enhancement greatly surpasses that observed with Snq2Cl2 and Sn(dmqo)2Cl2 (q = 8-hydroxyquinnoline; dmqo = 5,7-dimethyl-8-quinolinol). Furthermore, complex 1 displays excellent sensitivity and selectivity for fluoride detection in comparison to halides and other anions. As a result, complex 1 serves as an outstanding turn-on fluorescent chemosensor, effectively sensing fluoride ions. The Benesi-Hilderbrand method and Job's plot confirmed that complex 1 associates with F- in a 1 : 2 binding stoichiometry. Also, complex 1 exhibited a large binding constant (pKb = 10.4 M-2) and a low detection limit (100 nM). To gain a deeper insight into the photophysical properties and the underlying mechanism governing the formation of the tin(IV) fluoride complex via halide exchange, we successfully synthesized partially fluorinated Sn(meq)2F0.67Cl1.33 (2) and fully fluorinated Sn(meq)2F2 (3), all of which were characterized through computational studies, thereby elucidating their photophysical properties. DFT studies reveal that converting Sn(meq)2Cl2 to Sn(meq)2F2, an endergonic process, leads to greater stability due to reducing steric hindrance about the metal center. Furthermore, the fluorinated complex significantly increases dipole moment, resulting in high affinity toward the F- ion.

Solid-state mechanochemistry for the rapid and efficient synthesis of tris-cyclometalated iridium(iii) complexes

Tris-cyclometalated iridium(iii) complexes have received widespread attention as attractive prospective materials for e.g., organic light-emitting diodes (OLEDs), photoredox catalysts, and bioimaging probes. However, their preparation usually requires prolonged reaction times, significant amounts of high-boiling solvents, multistep synthesis, and inert-gas-line techniques. Unfortunately, these requirements represent major drawbacks from both a production-cost and an environmental perspective. Herein, we show that a two-step mechanochemical protocol using ball milling enables the rapid and efficient synthesis of various tris-cyclometalated iridium(iii) complexes from relatively cheap iridium(iii) chloride hydrate without the use of significant amounts of organic solvent in air. Notably, a direct one-pot procedure is also demonstrated. The present solid-state approach can be expected to inspire the development of cost-effective and timely production methods for these valuable iridium-based complexes, as well as the discovery of new phosphorescent materials, sensors, and catalysts.

Unexpected reactivity of cyclometalated iridium(III) dimers. Direct synthesis of a mononuclear luminescent complex

A new synthetic method has been developed for the preparation of unexpected emissive iridium(III) complexes (A and B), directly obtained from the established [Ir(ppy)2(μ-Cl)]2 dimer, under reaction conditions in which such compounds are usually considered stable. Complex A ([Ir(ppy)2(Oppy)], where Hppy = 2-phenylpyridine and HOppy = 2-(o-hydroxyphenyl)pyridine) was obtained from the dimer without the addition of further ancillary ligands in the reaction environment, but in the presence of a basic water environment in 2-ethoxyethanol as solvent at 165 °C. The complex evidences the unexpected insertion of an oxygen atom between the iridium(III) center and the carbon atom of one ppy moiety. Under specific reaction conditions, the mer-[Ir(ppy)3] complex (B) was obtained. The presence of the right amount of water is important to maximize the formation of A relative to B. Both compounds were fully characterized by NMR spectroscopy and mass spectrometry (MS), and the X-ray structure of A was also determined. DFT calculations were used to shed light on the reaction mechanism leading to the unexpected formation of A, suggesting that the Oppy ligand is generated intramolecularly once the [Ir(ppy)2(μ-OH)]2 dimer is formed. The process is probably assisted by a redox reaction involving the second iridium(III) center in the dimer. The electrochemical and photophysical properties of complexes A and B were investigated in comparison with the well-known fac-[Ir(ppy)3] analogue (C). Complex A displays a green emission (λmax = 545 nm) with a photoluminescence quantum yield (PLQY) of nearly 40%, whereas the oxygen-free counterpart B is poorly emissive, exhibiting an orange emission (λmax = 605 nm) with a PLQY below 10%. These findings may pave the way for the direct synthesis of neutral luminescent complexes with the general formula [Ir(C^N)2(OC^N)], even using dimers with non-commercial or highly substituted C^N ligands, without the need for synthesizing the corresponding hydroxyl-substituted ancillary ligand, which may be hardly obtainable.

Development and Application of Ruthenium(II) and Iridium(III) Based Complexes for Anion Sensing

Improvements in the design of receptors for the detection and quantification of anions are desirable and ongoing in the field of anion chemistry, and remarkable progress has been made in this direction. In this regard, the development of luminescent chemosensors for sensing anions is an imperative and demanding sub-area in supramolecular chemistry. This decade, in particular, witnessed advancements in chemosensors based on ruthenium and iridium complexes for anion sensing by virtue of their modular synthesis and rich chemical and photophysical properties, such as visible excitation wavelength, high quantum efficiency, high luminescence intensity, long lifetimes of phosphorescence, and large Stokes shifts, etc. Thus, this review aims to summarize the recent advances in the development of ruthenium(II) and iridium(III)-based complexes for their application as luminescent chemosensors for anion sensing. In addition, the focus was devoted to designing aspects of polypyridyl complexes of these two transition metals with different recognition motifs, which upon interacting with different inorganic anions, produces desirable quantifiable outputs.

Iridium(III) Sensitisers and Energy Upconversion: The Influence of Ligand Structure upon TTA-UC Performance

Six substituted ligands based upon 2-(naphthalen-1-yl)quinoline-4-carboxylate and 2-(naphthalen-2-yl)quinoline-4-carboxylate have been synthesised in two steps from a range of commercially available isatin derivatives. These species are shown to be effective cyclometallating ligands for Ir^III , yielding complexes of the form [Ir(C^N)₂ (bipy)]PF₆ (where C^N=cyclometallating ligand; bipy=2,2'-bipyridine). X-ray crystallographic studies on three examples demonstrate that the complexes adopt a distorted octahedral geometry wherein a cis-C,C and trans-N,N coordination mode is observed. Intraligand torsional distortions are evident in all cases. The Ir^III complexes display photoluminescence in the red part of the visible region (668-693 nm), which is modestly tuneable through the ligand structure. The triplet lifetimes of the complexes are clearly influenced by the precise structure of the ligand in each case. Supporting computational (DFT) studies suggest that the differences in observed triplet lifetime are likely due to differing admixtures of ligand-centred versus MLCT character instilled by the facets of the ligand structure. Triplet-triplet annihilation upconversion (TTA-UC) measurements demonstrate that the complexes based upon the 1-naphthyl derived ligands are viable photosensitisers with upconversion quantum efficiencies of 1.6-6.7 %.

Bridging-arylene effects on spectroscopic and photophysical properties of arylborane–dipyrrinato zinc(ii) complexes

Novel bis(dipyrrinato)zinc(ii) derivatives having 4-[bis(2,4,6-trimethylphenyl)boryl]phenyl (ZnBph) or 4-[bis(2,4,6-trimethylphenyl)boryl]-2,3,5,6-tetramethylphenyl groups (ZnBdu) at the 5-position of the dipyrrinato ligands were designed and synthesized. In ZnBph with the smaller dipyrrinate–arylene and arylene–dimesitylboryl dihedral angles, an intramolecular charge transfer arising from the presence of the vacant p orbital on the boron atom participates in the ππ* excited state in character in contrast to the pure ππ* excited state of ZnBdu. The synergistic ππ*/ILCT excited state was weakly fluorescent, and the fluorescence was enhanced upon binding of fluoride to the boron atom.

Electronic interactions between a bis(dipyrrinato)zinc(ii) and arylborane moieties were successfully tuned by a structure of bridging arylene groups. The excited state of a phenylene bridged complex was best characterized by the synergistic ππ*/ILCT.

An Efficient Probe of Cyclometallated Phosphorescent Iridium Complex for Selective Detection of Cyanide

A cyclometallated phosphorescent iridium-based probe to detect CN^- was prepared through a cyanide alcoholize reaction based on the C^N type main ligand and N^N type ancillary ligand (2-phenyl pyridine and 1,10-phenanthroline-5-carboxaldehyde, respectively). The efficient probe exhibited good sensitivity in response to CN^- in an CH₃CN and H₂O (95/5) mixture within a 1.23 μM detection limit. The response of PL is directly in line with the concentration of CN^- from 0 to 2.0 equiv. The PL investigation of other reactive anions proved the great selectivity to CN^-. Additionally, upon adding 1.0 equiv. of cyanide, the formation of cyanohydrin was correctly elucidated in ¹H NMR, FT-IR, and mass spectra studies. The conspicuous results indicate that the iridium complex has the potential possibility of application in other biosystems related to CN^-.

Two novel neutral and ionic Ir(iii) complexes based on the same bipolar main ligand: a comparative study of their photophysical properties and applications in solution-processed red organic light-emitting diodes

A bipolar ligand design for solution-processed red Ir(iii) complex OLED.

Improved deep-red phosphorescence in cyclometalated iridium complexes via ancillary ligand modification

Bis-cyclometalated iridium complexes with electron-rich ancillary ligands exhibit high phosphorescence quantum yields in the deep red region.

Organometallic Ir(III) Phosphors Decorated by Carbazole/Diphenylphosphoryl Units for Efficient Solution-Processable OLEDs with Low Efficiency Roll-Offs

Recently, solution-processable PhOLEDs have been attracting great interest for their low cost and high productivity relative to the vacuum-deposited devices. Similar to vacuum-deposited OLEDs, however, they usually suffer from serious efficiency roll-offs, especially in high brightness. Finding a feasible way and/or designing novel materials to increase efficiencies and reduce roll-offs simultaneously are highly desired. Herein, a new family of solution-processable cyclometalated iridium(III) phosphors with carbazole (Cz) and/or diphenylphosphoryl (Ph₂PO) units functionalized main ligands has been designed. Owing to Cz and Ph₂PO moieties possessing bulky steric effects, they can suppress the intermolecular strong packing and then decrease TTA effects and emission quenching. Meanwhile, the resulting OLEDs based on the designed phosphors exhibit considerable efficiencies and relatively small efficiency roll-offs. The device based on 4 containing both Cz and Ph₂PO units realized a maximum current efficiency of 21.3 cd A^-1, accompanied by a small roll-off. By optimization of the configuration of OLEDs, the device performance can be further enhanced, demonstrating their potential for high-performance solution-processable PhOLEDs.

Synthesis, structure and density functional theory calculations of a novel photoluminescent trisarylborane-bismuth(III) complex

A novel trisarylborane-Bi(III) complex, tris(4-(dimesitylboryl)phenyl)bismuthine [Bi(PhBMes₂ )₃ ], in which (Ph = phenyl, and Mes = mesityl), was synthesized via the reaction of bismuth (III) chloride (BiCl₃ ) with three equivalents of lithiated (4-bromophenyl)- dimesitylborane [BrPhBMes₂ ]. The new trisarylbismuthine was characterized by elemental analysis, ultraviolet-visible (UV-vis) spectroscopy, and NMR (¹ H and ¹³ C) spectroscopy. The molecular structure of Bi(PhBMes₂ )₃ in the solid state was determined using single-crystal X-ray diffraction analysis, which showed short intermolecular C-H···H-C contact. The complex is a fluorescent emitter (λ_max  = 395 nm) at room temperature and a phosphorescent emitter (λ_max  = 423 nm) at 77 K, which displayed a long lifetime of 495 ms. The UV-vis transitions were investigated using density function theory (DFT) and time-dependent (TD)-DFT calculations. Natural bond orbital analysis showed that the bismuth (III) center was mainly Lewis acidic in nature.

Room temperature phosphorescent triarylborane functionalized iridium complexes

We report a series of room temperature phosphorescent compounds 1-6 composed of triarylborane (TAB) and cyclometallated iridium complexes. The optical characteristics such as energy of transition and luminescence quantum yield of these compounds can be conveniently fine-tuned by judiciously varying the cyclometallating ligand and the spacer between boron and iridium centers. Compounds 1-6 exhibit bright phosphorescence with the emission color ranging from green to red under a N2 atmosphere. A maximum quantum yield of 0.95 was observed for complex 2. Complexes 1-6 exhibit a rare type of dual emission from singlet and triplet excited states under ambient conditions. The experimental observations are well supported by the theoretical calculations.

Rapid "turn-on" photoluminescence detection of bisulfite in wines and living cells with a formyl bearing bis-cyclometalated Ir(iii) complex

A new photoluminescence (PL) probe based on a formyl bearing bis-cyclometalated Ir(iii) complex, [Ir(ppy)2phen-CHO]+PF6- (1), is synthesized and applied to the selective detection of a bisulfite anion (HSO3-). Probe 1 is prepared using 2-phenylpyridine (ppy) as the C^N main ligand and 1,10-phenanthroline-5-carboxaldehyde (phen-CHO) as the N^N ancillary ligand. Probe 1 displayed excellent selective PL enhancement in response to HSO3- in acetic acid-sodium acetate buffer solution (pH = 5.0). The increase of PL signal is directly proportional to the concentration of HSO3- in the range of 2 μM to 45 μM with a detection limit of 0.9 μM using 50 μM probe 1 and in the range of 0.5 μM to 6 μM with a detection limit of 0.3 μM using 10 μM probe 1. More importantly, probe 1 can respond to HSO3- rapidly within 40 s. Furthermore, probe 1 was successfully applied to detect HSO3- in real white wines and the bioimaging of HSO3- in living cells. The superior properties of probe 1 make it of great potential use for studying the effects of HSO3- in other biosystems.

Bipyridine-based iridium(iii) triplet emitters for organic light-emitting diodes (OLEDs): application and impact of phenyl substitution at the 5′-position of the N-coordinating pyridine ring

Three blue phosphorescent homoleptic iridium(iii) complexes based on a bipyridine ligand were synthesized.

A Cu(ii) mediated approach for colorimetric detection of aqueous fluoride in ppm level with a Schiff base receptor

Inspired by the importance of fluoride detection in aqueous environment, a new methodology is demonstrated by employing the synergistic reaction of fluoride and Cu(ii) salts with a designed Schiff base receptor.

Phosphorescent cyclometalated iridium(iii) complexes: synthesis, photophysics, DNA interaction, cellular internalization, and cytotoxic activity

Phosphorescent cyclometalated quinoline-appended iridium(iii) complexes undergo rapid cellular internalization and accumulate throughout the cell.

A rare example of a compact heteroleptic cyclometalated iridium(iii) complex demonstrating well-separated dual emission

Cationic heteroleptic Ir(iii) complexes [Ir(C^N)₂(NN)][PF₆] exhibit unique singlet–triplet dual emission in solution with two well separated emission bands.

Large Size Color-tunable Electroluminescence from Cationic Iridium Complexes-based Light-emitting Electrochemical Cells

Solution-processable light-emitting electrochemical cells (LECs) with simple device architecture have become an attractive candidate for application in next generation lighting and flat-panel displays. Herein, single layer LECs employing two cationic Ir(III) complexes showing highly efficient blue-green and yellow electroluminescence with peak current efficiency of 31.6 cd A(-1) and 40.6 cd A(-1), respectively, have been reported. By using both complexes in the device, color-tunable LECs with a single spectral peak in the wavelength range from 499 to 570 nm were obtained by varying their rations. In addition, the fabrication of efficient LECs was demonstrated based on low cost doctor-blade coating technique, which was compatible with the roll to roll fabrication process for the large size production. In this work, for the first time, 4 inch LEC devices by doctor-blade coating were fabricated, which exhibit the efficiencies of 23.4 cd A(-1) and 25.4 cd A(-1) for the blue-green and yellow emission, respectively. The exciting results indicated that highly efficient LECs with controllable color could be realized and find practical application in large size lighting and displays.

Fluorescent probes for the selective detection of chemical species inside mitochondria

This feature article systematically summarizes the development of fluorescent probes for the selective detection of chemical species inside mitochondria.

A long lifetime switch-on iridium(iii) chemosensor for the visualization of cysteine in live zebrafish

A long lifetime iridium(iii) complex chemosensor1for cysteine detection has been synthesized.

Azaacenes as active elements for sensing and bio applications

Recent progress in the application of azaacenes in sensing and bio-fields has been summarized.