Insight into Water Oxidation by Mononuclear Polypyridyl Ru Catalysts

An intramolecular cobalt-peptoid complex as an efficient electrocatalyst for water oxidation at low overpotential

Water electrolysis is the simplest way to produce hydrogen, as a clean renewable fuel. However, the high overpotential and slow kinetics hamper its applicability. Designing efficient and stable electrocatalysts for water oxidation (WO), which is the first and limiting step of the water splitting process, can overcome this limitation. However, the development of such catalysts based on non-precious metal ions is still challenging. Herein we describe a bio-inspired Co(iii)-based complex i.e., a stable and efficient molecular electrocatalyst for WO, constructed from a peptidomimetic oligomer called peptoid - N-substituted glycine oligomer - bearing two binding ligands, terpyridine and bipyridine, and one ethanolic group as a proton shuttler. Upon binding of a cobalt ion, this peptoid forms an intramolecular Co(iii) complex, that acts as an efficient electrocatalyst for homogeneous WO in aqueous phosphate buffer at pH 7 with a high faradaic efficiency of up to 92% at an overpotential of about 430 mV, which is the lowest reported for Co-based homogeneous WO electrocatalysts to date. We demonstrated the high stability of the complex during electrocatalytic WO and that the ethanolic side chain plays a key role in the stability and activity of the complex and also in facilitating water binding, thus mimicking an enzymatic second coordination sphere.

Promoting Water Oxidation by Proton Acceptable Groups Surrounding Catalyst on Electrode Surface

Large-scale hydrogen production through water splitting represents an optimal approach for storing sustainable but intermittent energy sources. However, water oxidation, a complex and sluggish reaction, poses a significant bottleneck for water splitting efficiency. The impact of outer chemical environments on the reaction kinetics of water oxidation catalytic centers remains unexplored. Herein, chemical environment impacts were integrated by featuring methylpyridinium cation group (Py+) around the classic Ru(bpy)(tpy) (bpy=2,2'-bipyridine, tpy=2,2' : 6',2''-terpyridine) water oxidation catalyst on the electrode surface via electrochemical co-polymerization. The presence of Py+ groups could significantly enhance the turnover frequencies of Ru(bpy)(tpy), surpassing the performance of typical proton acceptors such as pyridine and benzoic acid anchored around the catalyst. Mechanistic investigations reveal that the flexible internal proton acceptor anions induced by Py+ around Ru(bpy)(tpy) are more effective than conventionally anchored proton acceptors, which promoted the rate-determining proton transfer process and enhanced the rate of water nucleophilic attack during O-O bond formation. This study may provide a novel perspective on achieving efficient water oxidation systems by integrating cations into the outer chemical environments of catalytic centers.

Configurationally Nonselective Aquation of a Mononuclear Ru(II) Chloro Complex to Aquo Complex Isomers with Distinctive Aspects in Photoisomerization, Redox, and Catalytic Water Oxidation

distal-[Ru(EtOtpy)(pynp)Cl]+ (d-EtO1Cl) (EtOtpy = 4'-ethoxy-2,2':6',2″-terpyridine, pynp = 2-(2-pyridyl)-1,8-naphthyridine), and distal/proximal-[Ru(EtOtpy)(pynp)OH2]2+ (d/p-EtO1H2O) complexes were newly synthesized to investigate the synergistic influence of the geometric configuration coupled with substituent introduction of an ethoxy (EtO) group on the physicochemical properties and reactions of the Ru(II) complexes. Configurationally nonselective aquation of d-EtO1Cl was uniquely observed to form d/p-EtO1H2O isomers in water, in contrast to configurationally selective aquation of distal-[Ru(tpy)(pynp)Cl]+ (d-1Cl, tpy = 2,2':6',2″-terpyridine) without the EtO group [Yamazaki, H. . J. Am. Chem. Soc. 2011, 133, 8846-8849].The kinetic profiles of the aquation reactions of d-EtO1Cl were well analyzed using a sequential reversible reaction model assuming the reversible interconversion between d/p-EtO1H2O isomers via d-EtO1Cl. The observed equilibrium constant (Kiso) of isomerization between p/d-EtO1H2O was calculated from the kinetic analysis as Kiso = 0.45, which is consistent with the final concentration ratio (1:0.43) of p/d-EtO1H2O generated in the aquation reaction of d-EtO1Cl. The irreversible photoisomerization from d-EtO1H2O to p-EtO1H2O was observed in water with an internal quantum yield (Φ) of 0.44% at 520 nm. Electrochemical measurements showed that d-EtO1H2O undergoes a 2-step oxidation reaction of 1H+-coupled 1e- processes of RuII-OH2/RuIII-OH and RuIII-OH/RuIV═O at pH 1.3-9.7, whereas p-EtO1H2O undergoes a 1-step oxidation reaction of a 2H+-coupled 2e- process of RuII-OH2/RuIV═O in the pH range of 1.8-11.5. Any redox potential of d/p-EtO1H2O isomers was decreased by the electro-donating EtO substitution, compared with distal/proximal-[Ru(tpy)(pynp)OH2]2+ (d/p-1H2O). The turnover frequency (kO2 = 1.7 × 10-2 s-1) of d-EtO1H2O for water oxidation catalysis is higher than that (3.5 × 10-4 s-1) of p-EtO1H2O by a factor of 48.6. The kO2 value (1.7 × 10-2 s-1) for d-EtO1H2O is 4.5-fold higher than those of d-1H2O (3.8 × 10-3 s-1). The higher kO2 value of d-EtO1H2O compared with d-1H2O could be explained by the fast oxidation rate from RuIV═O to RuV═O involved in the rate-determining step due to the electron-donating EtO group.

Correlations between the Electronic Structure and Energetics of the Catalytic Steps in Homogeneous Water Oxidation Catalysis

The development of an efficient electrocatalyst for the water oxidation reaction is limited by unfavorable scaling relations between catalytic intermediates, resulting in an overpotential. In contrast to heterogeneous catalysts, the electronic structure of homogeneous catalysts can be modified to a great extent due to a tailored ligand design. However, studies utilizing the tunability of organic ligands have rarely been conducted in a systematic manner and, as of yet, have not produced catalytic paths that avoid the aforementioned unfavorable scaling relations. To investigate the influence of electron-donating groups (EDGs) or electron-withdrawing groups (EWGs) on elementary steps in electrochemical water oxidation catalysis, cis-[Ru(bpy)2(H2O)]2+ (bpy = 2,2'-bipyridine) was selected as the scaffold that was modified with methyl, methoxy, chloro, and trifluoromethyl groups. This catalyst can undergo several electron transfer (ET), proton transfer (PT), and proton-coupled electron transfer (PCET) steps that were all probed experimentally. In this systematic study, it was found that PCET steps are relatively insensitive with respect to the presence of EDGs or EWGs, while the decoupled ET and PT steps are more heavily affected. However, the influence of the substituents decreases with an increasing oxidation state of Ru due to a lack of d-electrons available at the Ru center for π-backbonding to the bipyridine ligand. Therefore, the RuV/VI redox couple appears to be relatively unaffected by the substituent. Nevertheless, the implementation of EWGs can shift all oxidation events to a very narrow potential window. Not only do our findings illustrate how electronic substituents affect the entire potential energy landscape of the catalytic water oxidation reaction, but they also show that the cis-[Ru(bpy)2(H2O)]2+ compounds follow different design rules and scaling relations, as has been reported for every other oxygen evolution catalyst thus far.

A Personal Account on Inorganic Reaction Mechanisms

The presented Review is focused on the latest research in the field of inorganic chemistry performed by the van Eldik group and his collaborators. The first part of the manuscript concentrates on the interaction of nitric oxide and its derivatives with biologically important compounds. We summarized mechanistic information on the interaction between model porphyrin systems (microperoxidase) and NO as well as the recent studies on the formation of nitrosylcobalamin (CblNO). The following sections cover the characterization of the Ru(II)/Ru(III) mixed-valence ion-pair complexes, including Ru(II)/Ru(III)(edta) complexes. The last part concerns the latest mechanistic information on the DFT techniques applications. Each section presents the most important results with the mechanistic interpretations.

Photoexcitation of Fe3 O Nodes in MOF Drives Water Oxidation at pH=1 When Ru Catalyst Is Present

Artificial photosynthesis strives to convert the energy of sunlight into sustainable, eco-friendly solar fuels. However, systems with light-driven water oxidation reaction (WOR) at pH=1 are rare. Broadly used [Ru(bpy)₃ ]²⁺ (bpy=2,2'-bipyridine) photosensitizer has a fixed +1.23 V potential which is insufficient to drive most water oxidation catalysts (WOCs) in acid, while Fe₂ O₃ , featuring the highly oxidizing holes, is not stable at low pH. Here, the key examples of Fe-based metal-organic framework (MOF) water oxidation photoelectrocatalysts active at pH=1 are presented. Fe-MIL-126 and Fe MOF-dcbpy structures were formed with 4,4'-biphenyl dicarboxylate (bpdc), 2,2'-bipyridine-5,5'-dicarboxylate (dcbpy) linkers and their mixtures. Presence of dcbpy linkers allows integration of metal-based catalysts via coordination to 2,2'-bipyridine fragments. Fe-based MOFs were doped with Ru-based precursors to achieve highly active MOFs bearing [Ru(bpy)(dcbpy)(H₂ O)₂ ]²⁺ WOC. Materials were analyzed with X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infra-red (FTIR) spectroscopy, resonance Raman, X-ray absorption spectroscopy, fs optical pump-probe, electron paramagnetic resonance (EPR), diffuse reflectance and electric conductivity measurements and were modeled by band structure calculations. It is shown that under reaction conditions, Fe^III and Ru^III oxidation states are present, indicating rate-limiting electron transfer in MOF. Fe₃ O nodes emerge as photosensitizers able to drive prolonged O₂ evolution in acid. Further developments are possible via MOF's linker modification for enhanced light absorption, electrical conductivity, reduced MOF solubility in acid, Ru-WOC modification for faster WOC catalysis, or Ru-WOC substitution to 3d metal-based systems. The findings give further insight for development of light-driven water splitting systems based on Earth-abundant metals.

Ruthenium Azobis(benzothiazole): Electronic Structure and Impact of Substituents on the Electrocatalytic Single-Site Water Oxidation Process

The present article deals with the structurally and spectroelectrochemically characterized newer class of ruthenium-azoheteroarenes [Ru^II(Ph-trpy)(Cl)(L)]ClO₄, [1]ClO₄-[3]ClO₄ (Ph-trpy: 4'-phenyl-2,2':6',2″-terpyridine; L1: 2,2'-azobis(benzothiazole) ([1]ClO₄); L2: 2,2'-azobis(6-methylbenzothiazole) ([2]ClO₄); L3: 2,2'-azobis(6-chlorobenzothiazole) ([3]ClO₄)). A collective consideration of experimental (i.e., structural and spectroelectrochemical) and theoretical (DFT calculations) results of [1]ClO₄-[3]ClO₄ established selective stabilization of (i) the unperturbed azo (N═N)⁰ function of L, (ii) the exclusive presence of the isomeric form involving the N(azo) donor of L trans to Cl, and (iii) the presence of extended, hydrogen-bonded trimeric units in the asymmetric unit of [2]ClO₄ (CH---O) via the involvement of ClO₄^- anions. The detailed electrochemical studies revealed metal-based oxidation of [Ru^II(Ph-trpy)(Cl)(L)]⁺ (1⁺-3⁺) to [Ru^III(Ph-trpy)(Cl)(L)]²⁺ (1²⁺-3²⁺); however, the electronic form of the first reduced state (1-3) could be better represented by its mixed Ru^II(Ph-trpy)(Cl)(L^•-)/Ru^III(Ph-trpy)(Cl)(L^2-) state. Both native (1⁺-3⁺) and reduced (1-3) states exhibited weak lower energy transitions within the range of 1000-1200 nm. Further, [1]ClO₄-[3]ClO₄ delivered an electrochemical OER (oxygen evolution reaction) process in alkaline medium on immobilizing them to a carbon cloth support, which divulged an amplified water oxidation feature for [2]ClO₄ due to the presence of electron-donating methyl groups in the L2 backbone. The faster OER kinetics and high catalytic stability of [2]ClO₄ could also be rationalized by its lowest Tafel slope (85 mV dec^-1) and choronoamperometric experiment (stable up to 12 h), respectively, along with high Faradic efficiency (∼97%). A comparison of [2]ClO₄ with the reported analogous ruthenium complexes furnished its excellent intrinsic water oxidation activity.

Photoelectrochemical water oxidation by a MOF/semiconductor composite

Herein, we report the development of a MOF-semiconductor composite film active for water oxidation at a thermodynamic underpotential.

Computational Analysis of Structure - Activity Relationships in Highly Active Homogeneous Ruthenium-based Water Oxidation Catalysts

Linear free energy scaling relationships (LFESRs) and regression analysis may predict the catalytic performance of heterogeneous and recently, homogenous water oxidation catalysts (WOCs). This study analyses twelve homogeneous Ru-based catalysts - some, the most active catalysts studied: the Ru(tpy-R)(QC) and Ru(tpy-R)(4-pic)2 catalysts, where tpy is 2,2:6,2-terpyridine, QC is 8-quinolinecarboxylate and 4-pic is 4-picoline. Typical relationships studied among heterogenous and solid-state catalysts cannot be broadly applied to homogeneous catalysts. This subset of structurally similar catalysts with impressive catalytic activity deserves closer computational and statistical analysis of energetics correlating with measured catalytic activity. We report general methods of LFESR analysis yield insufficiently robust relationships between descriptor variables. However, volcano plot-based analysis grounded in Sabatier's principle reveals ranges of ideal relative energies of the RuIV=O and RuIV-OH intermediates and optimal changes in free energies of water nucleophilic attack on RuV=O. A narrow range of RuIV-OH to RuV=O redox potentials corresponding with the highest catalytic activities suggests facile access to the catalytically competent high-valent RuV=O state, often inaccessible from RuIV=O. Our work introduces experimental oxygen evolution rates into approaches of LFESR and Sabatier principle-based analysis, identifying a narrow yet fertile energetic landscape to bountiful oxygen-evolution activity, leading future rational design.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

On the Homogeneity of a Cobalt-Based Water Oxidation Catalyst

The homogeneity of molecular Co-based water oxidation catalysts (WOCs) has been a subject of debate over the last 10 years as assumed various homogeneous Co-based WOCs were found to actually form CoO_x under operating conditions. The homogeneity of the Co(HL) (HL = N,N-bis(2,2′-bipyrid-6-yl)amine) system was investigated with cyclic voltammetry, electrochemical quartz crystal microbalance, and X-ray photoelectron spectroscopy. The obtained experimental results were compared with heterogeneous CoO_x. Although it is shown that Co(HL) interacts with the electrode during electrocatalysis, the formation of CoO_x was not observed. Instead, a molecular deposit of Co(HL) was found to be formed on the electrode surface. This study shows that deposition of catalytic material is not necessarily linked to the decomposition of homogeneous cobalt-based water oxidation catalysts.

Systematic Influence of Electronic Modification of Ligands on the Catalytic Rate of Water Oxidation by a Single-Site Ru-Based Catalyst

Catalytic water oxidation is an important process for the development of clean energy solutions and energy storage. Despite the significant number of reports on active catalysts, systematic control of the catalytic activity remains elusive. In this study, descriptors are explored that can be correlated with catalytic activity. [Ru(tpy)(pic)₂ (H₂ O)](NO₃ )₂ and [Ru(EtO-tpy)(pic)₂ (H₂ O)](NO₃ )₂ (where tpy=2,2' : 6',2"-terpyridine, EtO-tpy=4'-(ethoxy)-2,2':6',2"-terpyridine, pic=4-picoline) are synthesized and characterized by NMR, UV/Vis, EPR, resonance Raman, and X-ray absorption spectroscopy, and electrochemical analysis. Addition of the ethoxy group increases the catalytic activity in chemically driven and photocatalytic water oxidation. Thus, the effect of the electron-donating group known for the [Ru(tpy)(bpy)(H₂ O)]²⁺ family is transferable to architectures with a tpy ligand trans to the Ru-oxo unit. Under catalytic conditions, [Ru(EtO-tpy)(pic)₂ (H₂ O)](NO₃ )₂ displays new spectroscopic signals tentatively assigned to a peroxo intermediate. Reaction pathways were analyzed by using DFT calculations. [Ru(EtO-tpy)(pic)₂ (H₂ O)](NO₃ )₂ is found to be one of the most active catalysts functioning by a water nucleophilic attack mechanism.

Computational Scaling Relationships Predict Experimental Activity and Rate-Limiting Behavior in Homogeneous Water Oxidation

While computational screening with first-principles density functional theory (DFT) is essential for evaluating candidate catalysts, limitations in accuracy typically prevent the prediction of experimentally relevant activities. Exemplary of these challenges are homogeneous water oxidation catalysts (WOCs) where differences in experimental conditions or small changes in ligand structure can alter rate constants by over an order of magnitude. Here, we compute mechanistically relevant electronic and energetic properties for 19 mononuclear Ru transition-metal complexes (TMCs) from three experimental water oxidation catalysis studies. We discover that 15 of these TMCs have experimental activities that correlate with a single property, the ionization potential of the Ru(II)-O₂ catalytic intermediate. This scaling parameter allows the quantitative understanding of activity trends and provides insight into the rate-limiting behavior. We use this approach to rationalize differences in activity with different experimental conditions, and we qualitatively analyze the source of distinct behavior for different electronic states in the other four catalysts. Comparison to closely related single-atom catalysts and modified WOCs enables rationalization of the source of rate enhancement in these WOCs.

New ruthenium polypyridyl complexes as potential sensors of acetonitrile and catalysts for water oxidation

New ruthenium(ii) polypyridyl complexes of formulae [RuCl(Me₂Ntrpy)(bpy-OMe)]Cl, 1, and [Ru(Me₂Ntrpy)(bpy-OMe)(OH₂)](CF₃SO₃)₂, 2, with Me₂Ntrpy = 4′-N,N-dimethylamino-2,2′:6′,2′′-terpyridine and bpy-OMe = 4,4′-dimethoxy-2,2′-bipyridine, were synthetized and characterized by spectroscopic and electrochemical techniques. Besides, [Ru(Me₂Ntrpy)(bpy-OMe)(NCCH₃)]²⁺, 3, was obtained and characterized by UV-vis spectroscopy in acetonitrile solution. All experimental results were complemented with DFT and TD-DFT calculations. The complete structure of complex 1 was determined by X-ray diffraction, evidencing that the Ru–N and Ru–Cl bond lengths are longer than those determined in [RuCl(trpy)(bpy)](PF₆). The strong electron donating properties of the substituents of both bpy and trpy rings in complexes 1 and 2 led to their potential applications for detecting traces of acetonitrile as a contaminant in aqueous solutions of radiopharmaceuticals and to utilization of complex 2 as a promising candidate for catalyzing water oxidation processes.

New mononuclear polypyridyl Ru(ii) complexes were synthesized and fully characterized. These species can be potentially applied for detection of CH₃CN as a contaminant in radiopharmaceuticals used in PET studies or for catalysing water oxidation.

A Visible-Light and Temperature Responsive Host-Guest System: Photoisomerization of a Ruthenium Complex and Inclusion Complex Formation with Cyclodextrins

In the present study, we investigated the visible-light- and thermal-stimuli-responsive properties of a host–guest system based on proximal- and distal-[Ru(C10tpy)(C10pyqu)OH2]2+ (proximal and distal-1, C10tpy = 4’-decyloxy-2,2’;6’,2”-terpyridine, C10pyqu = 2-[2’-(6’-decyloxy)-pyridyl]quinoline). The...

Strong Ligand Stabilization Based on π-Extension in a Series of Ruthenium Terpyridine Water Oxidation Catalysts

The substitution behavior of the monodentate Cl ligand of a series of ruthenium(II) terpyridine complexes (terpyridine (tpy)=2,2':6',2''-terpyridine) has been investigated. 1 H NMR kinetic experiments of the dissociation of the chloro ligand in D2 O for the complexes [Ru(tpy)(bpy)Cl]Cl (1, bpy=2,2'-bipyridine) and [Ru(tpy)(dppz)Cl]Cl (2, dppz=dipyrido[3,2-a:2',3'-c]phenazine) as well as the binuclear complex [Ru(bpy)2 (tpphz)Ru(tpy)Cl]Cl3 (3 b, tpphz=tetrapyrido[3,2-a:2',3'-c:3'',2''-h:2''',3'''-j]phenazine) were conducted, showing increased stability of the chloride ligand for compounds 2 and 3 due to the extended π-system. Compounds 1-5 (4=[Ru(tbbpy)2 (tpphz)Ru(tpy)Cl](PF6 )3 , 5=[Ru(bpy)2 (tpphz)Ru(tpy)(C3 H8 OS)/(H2 O)](PF6 )3 , tbbpy=4,4'-di-tert-butyl-2,2'-bipyridine) are tested for their ability to run water oxidation catalysis (WOC) using cerium(IV) as sacrificial oxidant. The WOC experiments suggest that the stability of monodentate (chloride) ligand strongly correlates to catalytic performance, which follows the trend 1>2>5≥3>4. This is also substantiated by quantum chemical calculations, which indicate a stronger binding for the chloride ligand based on the extended π-systems in compounds 2 and 3. Additionally, a theoretical model of the mechanism of the oxygen evolution of compounds 1 and 2 is presented; this suggests no differences in the elementary steps of the catalytic cycle within the bpy to the dppz complex, thus suggesting that differences in the catalytic performance are indeed based on ligand stability. Due to the presence of a photosensitizer and a catalytic unit, binuclear complexes 3 and 4 were tested for photocatalytic water oxidation. The bridging ligand architecture, however, inhibits the effective electron-transfer cascade that would allow photocatalysis to run efficiently. The findings of this study can elucidate critical factors in catalyst design.

A Synthetic Route to a Ruthenium Complex via Successive Photosubstitution Reactions

Photosubstitution reactions of cis-[Ru(bpy)₂(MeCN)₂]²⁺ with a pyrazole ligand (pzH) were studied under various conditions toward the development of a photochemical synthetic route to polypyridyl ruthenium complexes (bpy = 2,2'-bipyridine). In the absence of a base, light irradiation of an acetonitrile solution of pyrazole and cis-[Ru(bpy)₂(MeCN)₂]²⁺ gave a mixture of the reactant and cis-[Ru(bpy)₂(pzH)(MeCN)]²⁺. In the presence of a mild base such as N,N-dimethylaminopyridine, a second photosubstitution from cis-[Ru(bpy)₂(pzH)(MeCN)]²⁺ to cis-[Ru(bpy)₂(pz)(pzH)]⁺ (1b) was greatly enhanced, as confirmed by UV-vis and ¹H nuclear magnetic resonance spectroscopy. The yields of 1b were increased in solvents with moderate coordinating properties, such as acetone. The successive photosubstitution reaction was observed using a stoichiometric amount of pyrazole.

Bio-Inspired Molecular Catalysts for Water Oxidation

The catalytic tetranuclear manganese-calcium-oxo cluster in the photosynthetic reaction center, photosystem II, provides an excellent blueprint for light-driven water oxidation in nature. The water oxidation reaction has attracted intense interest due to its potential as a renewable, clean, and environmentally benign source of energy production. Inspired by the oxygen-evolving complex of photosystem II, a large of number of highly innovative synthetic bio-inspired molecular catalysts are being developed that incorporate relatively cheap and abundant metals such as Mn, Fe, Co, Ni, and Cu, as well as Ru and Ir, in their design. In this review, we briefly discuss the historic milestones that have been achieved in the development of transition metal catalysts and focus on a detailed description of recent progress in the field.

Immobilising molecular Ru complexes on a protective ultrathin oxide layer of p-Si electrodes towards photoelectrochemical CO2 reduction

Photoelectrochemical CO2 reduction is a promising approach for renewable fuel generation and to reduce greenhouse gas emissions. Owing to their synthetic tunability, molecular catalysts for the CO2 reduction reaction can give rise to high product selectivity. In this context, a RuII complex [Ru(HO-tpy)(6-mbpy)(NCCH3)]2+ (HO-tpy = 4'-hydroxy-2,2':6',2''-terpyridine; 6-mbpy = 6-methyl-2,2'-bipyridine) was immobilised on a thin SiOx layer of a p-Si electrode that was decorated with a bromide-terminated molecular layer. Following the characterisation of the assembled photocathodes by X-ray photoelectron spectroscopy and ellipsometry, PEC experiments demonstrate electron transfer from the p-Si to the Ru complex through the native oxide layer under illumination and a cathodic bias. A state-of-the-art photovoltage of 570 mV was determined by comparison with an analogous n-type Si assembly. While the photovoltage of the modified photocathode is promising for future photoelectrochemical CO2 reduction and the p-Si/SiOx junction seems to be unchanged during the PEC experiments, a fast desorption of the molecular Ru complex was observed. An in-depth investigation of the cathode degradation by comparison with reference materials highlights the role of the hydroxyl functionality of the Ru complex to ensure its grafting on the substrate. In contrast, no essential role for the bromide function on the Si substrate designed to engage with the hydroxyl group of the Ru complex in an SN2-type reaction could be established.

LEAFY protein crystals with a honeycomb structure as a platform for selective preparation of outstanding stable bio-hybrid materials

Well-organized protein assemblies offer many properties that justify their use for the design of innovative bionanomaterials. Herein, crystals of the oligomerization domain of the LEAFY protein from Ginkgo biloba, organized in a honeycomb architecture, were used as a modular platform for the selective grafting of a ruthenium-based complex. The resulting bio-hybrid crystalline material was fully characterized by UV-visible and Raman spectroscopy and by mass spectrometry and LC-MS analysis after selective enzymatic digestion. Interestingly, insertion of complexes within the tubular structure affords an impressive increase in stability of the crystals, eluding the use of stabilizing cross-linking strategies.

Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts

The discovery of new and versatile strategies for the immobilization of molecular water-oxidation catalysts (WOCs) is crucial for developing clean energy conversion devices [e.g., (photo)electrocatalytic cells for water splitting]. The traditional approach for surface attachment to transparent conductive oxides [e.g., fluorine doped tin oxide (FTO)] is via synthetic modification of the ligand architecture to incorporate functional groups such as carboxylic acids (-COOH) or phosphonates (-PO₃H₂) prior to immobilization. However, challenges arising from desorption and the cumbersome derivatizations steps have limited the scope and applications of surface-bound WOCs. Herein, we report the successful immobilization of underivatized Ru(II)-based WOCs (Ru-Cat1 = [Ru(tpy) (bpy) (H₂O)]²⁺ (tpy = 2,2':6'2″-terpyridine and bpy = 2,2'-bipyridine) and Ru-Cat2 = [Ru(Mebimpy) (bpy) (H₂O)]²⁺ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) pyridine)) and the Ru(II) polypyridyl chromophore Ru-C3 = [Ru(bpy)₃]²⁺ onto a FTO plasma-grafted poly(acrylic acid) surface (PAA|FTO). Various characterization techniques such as attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and cyclic voltammetry measurements provide evidence for the plasma-induced grafted PAA|FTO film and immobilization. Surface stability and electrocatalytic properties of these new hybrid composite films upon cycling were investigated at different pH values. Immobilized Ru-Cat1 and Ru-Cat2 onto PAA|FTO displayed pH-dependent (Ru^III/Ru^II) couples and onset potentials indicative of PCET (proton-coupled electron transfer) reactions. Based on cyclic voltammetry results and spectroscopic monitoring, the immobilized WOCs Ru-Cat1 and Ru-Cat2 exhibited a higher surface stability in neutral aqueous solutions relative to Ru-C3 upon electrochemical oxidation. We attribute the surface PCET and stability to the presence of a water ligand in the coordination sphere of immobilized Ru-Cat1 and Ru-Cat2 which can H-bond with negatively charged carboxylate groups of the cross-linked PAA brushes. Our findings demonstrate that the plasma-grafted polymeric network onto FTO offers a versatile platform to directly anchor unmodified homogeneous WOCs or chromophores for potential applications in solar-to-fuel energy conversion.

Binding Orientation of a Ruthenium-Based Water Oxidation Catalyst on a CdS QD Surface Revealed by NMR Spectroscopy

We report on the binding of a Ru-based water oxidation catalyst (WOC) to CdS quantum dots (QDs) revealed by ¹H NMR spectroscopy. Spin centers within the WOC exhibit correlated trends in chemical shift and T₂ lifetime shortening upon QD binding. These effects are a highly directional function of proton position within the WOC, thus uncovering orientation information relative to the QD surface. The data suggest that the WOC interacts with the QD surface via the Ru terpyridine ligand, an unexpected orientation that has important implications for interfacial charge transfer and subsequent catalysis. This binding motif enables strong enough donor-acceptor electronic coupling for ultrafast photoinduced hole transfer while maintaining electronically distinct functional subunits.

Synthesis, UV-visible spectroelectrochemistry and theoretical characterization of new polypyridyl Ru(II) complexes containing 2,4,6-tris(2-pyridyl)-1,3,5-triazine as precursors for water oxidation catalysts

In this work, we report the syntheses and physicochemical characterization of new chloro and aqua complexes of Ru(ii) with 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tptz) and 2,2'-bipyridines substituted with donor and acceptor groups in the 4,4'-positions. The aqua complexes behave as precursors for water oxidation catalysts at pH = 1 using Ce(iv) as a sacrificial oxidant. Besides, the oxidized forms Ru(iv) and Ru(v) have been characterized at different pH values by electrochemistry, UV-Visible spectroscopy and spectroelectrochemistry. The reaction mechanisms were studied by combining mixing and stopped-flow experiments with spectrophotometric monitoring in the UV-visible region and all the rate constants were determined together with the corresponding TON and TOF values at pH = 1. Calculations based on Density Functional Theory (DFT and TD-DFT) were performed to support the experimental data.

Intramolecular Hydrogen Bonding: A Key Factor Controlling the Photosubstitution of Ruthenium Complexes

Photosubstitution reactions of ruthenium complexes with pyrazole ligands, cis-[Ru(bpy)₂(pzH)₂]²⁺ (1a), cis-[Ru(bpy)₂(pz)(pzH)]⁺ (1b), and cis-[Ru(bpy)₂(pz)₂]⁰ (1c) (pzH = pyrazole, bpy = 2,2'-bipyridine), were investigated. Dicationic complex 1a was deprotonated to 1b using moderate base (pK_a = 15.2, MeCN), while the second deprotonation to give 1c required more severe conditions (pK_a = 26.9). Monocationic complex 1b possessed an N-H···N-type intramolecular hydrogen bond between the pyrazole and pyrazolate ligands, as corroborated by the solid-state crystal structure. The photosubstitution quantum yield of 1a (Φ = 0.26) was comparable to that of cis-[Ru(bpy)₂(pyridine)₂]²⁺ (Φ = 0.24) in acetonitrile solution. In contrast, the photodissociation of a pzH ligand was strongly suppressed by the deprotonation of a pyrazole ligand N-H group. In the presence of 10 000 equiv of 4,4'-dimethylaminopyridine, the quantum yield dropped to ∼2 × 10^-6 in acetonitrile. The photosubstitution quantum yield of 1b was even smaller than that of neutral complex 1c, although 1c had a smaller HOMO-LUMO energy gap than monocationic complex 1b. The small quantum yield of 1b was attributed to intramolecular hydrogen bonding between pyrazole and pyrazolate ligands. The apparent rate constants for the photosubstitution of 1b were highly solvent-dependent. The photosubstitution of 1b was suppressed in aprotic solvents, while the reaction was accelerated by 2 orders of magnitude in protic solvents with strong proton donor abilities.

Vibrational Spectra of the Ruthenium-Tris-Bipyridine Dication and Its Reduced Form in Vacuo

Experimental IR spectra in the 500–1850 cm^–1 fingerprint frequency range are presented for the isolated, gaseous redox pair ions [Ru(bpy)₃]²⁺, and [Ru(bpy)₃]⁺, where bpy = 2,2′-bipyridine. Spectra are obtained using the FELIX free-electron laser and a quadrupole ion trap mass spectrometer. The 2+ complex is generated by electrospray ionization and the charge-reduced radical cation is produced by gas-phase one-electron reduction in an ion–ion reaction with the fluoranthene radical anion. Experimental spectra are compared against computed spectra predicted by density functional theory (DFT) using different levels of theory. For the closed-shell [Ru(bpy)₃]²⁺ ion, the match between experimental and computed IR spectra is very good; however, this is not the case for the charge-reduced [Ru(bpy)₃]⁺ ion, which demands additional theoretical investigation. When using the hybrid B3LYP functional, we observe that better agreement with experiment is obtained upon reduction of the Hartree–Fock exact-exchange contribution from 20% to about 14%. Additionally, calculations using the M06 functional appear to be promising in terms of the prediction of IR spectra; however, it is unclear if the correct electronic structure is obtained. The M06 and B3LYP functionals indicate that the added electron in [Ru(bpy)₃]⁺ is delocalized over the three bpy ligands, while the long-range corrected LC-BLYP and the CAM-B3LYP functionals show it to be more localized on a single bpy ligand. Although these latter levels of theory fail to reproduce the experimentally observed IR frequencies, one may argue that the unusually large bandwidths observed in the spectrum are due to the fluxional character of a complex with the added electron not symmetrically distributed over the ligands. The experimental IR spectra presented here can serve as benchmark for further theoretical investigations.

Ru(ii) water oxidation catalysts with 2,3-bis(2-pyridyl)pyrazine and tris(pyrazolyl)methane ligands: assembly of photo-active and catalytically active subunits in a dinuclear structure

Two mononuclear Ru(ii) complexes, i.e. [RuCl(κ³N-terpy)(κ²N-dpp)]PF₆ ([1]PF₆; terpy = 2,2':6',2''-terpyridine; dpp = 2,3-bis(2'-pyridyl-pyrazine) and [RuCl(κ³N-tpm)(κ²N-dpp)]Cl ([2]Cl; tpm = tris(1-pyrazolyl)methane), and one dinuclear complex, i.e. [Ru₂Cl(κ³N-tpm)(μ-κ²N:κ²N-dpp)Ru(κ²N-bpy)₂][PF₆]₃ ([3][PF₆]₃; bpy = 2,2'-bipyridine), have been synthesized and their water oxidation catalytic properties have been investigated. A combined DFT and experimental (³⁵Cl NMR and conductivity measurements) study aimed to elucidate the nature of [1]⁺ and [2]⁺ in aqueous solution has also been performed, indicating that one water molecule is allowed to enter the first coordination sphere of [2]⁺ in the ground state, replacing one tpm nitrogen. Conversely, in the case of [1]⁺, water coordination, assumed to be needed for the water oxidation process, presumably occurs following the oxidation of the metal. For all complexes, a catalytic wave has been detected in acetonitrile/water 1 : 1 (v/v) solution in the range 1.4-1.7 V vs. SCE. In all cases, water oxidation (investigated at pH < 8) takes place initially via a proton-coupled two-electron, two-proton process with the formation of an Ru(iv)[double bond, length as m-dash]O moiety, followed by one electron oxidation and water nucleophilic attack. The TON and TOF values (within the range of 16-33 and 1.3-2.2 h^-1, respectively) of the complexes are higher than those of the benchmark [Ru(LLL)(LL)(OH₂)]²⁺-type species (LLL and LL are tridentate and bidentate polypyridine ligands, respectively), which is [Ru(terpy)(bpm)(OH₂)]²⁺.

Redox-Active Ligand Assisted Catalytic Water Oxidation by a RuIV =O Intermediate

Water splitting is one of the most promising solutions for storing solar energy in a chemical bond. Water oxidation is still the bottleneck step because of its inherent difficulty and the limited understanding of the O-O bond formation mechanism. Molecular catalysts provide a platform for understanding this process in depth and have received wide attention since the first Ru-based catalyst was reported in 1982. Ru^V =O is considered a key intermediate to initiate the O-O bond formation through either a water nucleophilic attack (WNA) pathway or a bimolecular coupling (I2M) pathway. Herein, we report a Ru-based catalyst that displays water oxidation reactivity with Ru^IV =(O) with the help of a redox-active ligand at pH 7.0. The results of electrochemical studies and DFT calculations disclose that ligand oxidation could significantly improve the reactivity of Ru^IV =O toward water oxidation. Under these conditions, sustained water oxidation catalysis occurs at reasonable rates with low overpotential (ca. 183 mV).

Molecular quaterpyridine-based metal complexes for small molecule activation: water splitting and CO2 reduction

This tutorial describes recent developments in the use of metal quaterpyridine complexes as electrocatalysts and photocatalysts for water splitting and CO₂ reduction.

In need of a second-hand? The second coordination sphere of ruthenium complexes enables water oxidation with improved catalytic activity

A ligand dangling arm, acting as an intramolecular proton acceptor, drastically increasing the catalytic activity of Ru-complexes for water oxidation.

Critical Hammett Electron-Donating Ability of Substituent Groups for Efficient Water Oxidation Catalysis by Mononuclear Ruthenium Aquo Complexes

[Ru(Rtpy)(bpy)(H₂O)]²⁺ (1R; bpy = 2,2'-bipyridine, and Rtpy = 2,2':6',2″-terpyridine derivatives) complexes with a variety of 4'-substituent groups on Rtpy were synthesized and characterized to reveal the effects of substituents on their structures, physicochemical properties, and catalytic activities for water oxidation. The geometric structures of 1R are not considerably influenced by the electron-donating ability of the 4'-substituent groups on Rtpy. Similar multistep proton-coupled electron transfer reactions were observed for 1R, and the redox potentials for each oxidation step tended to decrease with an increase in the electron-donating ability of the substituent, which is explained by the increased electron density on the Ru center by electron-donating groups, stabilizing the positive charge that builds up upon oxidation. This is consistent with the red-shift of the absorption bands around 480 nm assigned to the metal-to-ligand charge transfer transition for 1R due to the increased d orbital energy level of the Ru center. The turnover frequency (k_O2) of 1R for water oxidation catalysis, however, depended greatly on the Rtpy ligands, varying from 0.05 × 10^-2 to 44 × 10^-2 s^-1 (as the highest k_O2 was observed for R = ethoxy) by a factor of 880. A critical electron-donating ability of the 4'-substituent groups with a narrow range of Hammett constants (σ_p = -0.27 to -0.24) found for the highest k_O2 values is valuable for understanding the great difficulty in the search for efficient water oxidation catalysts. On another front, the k_O2 values increased with a decrease in the redox potentials of Ru^IV═O/Ru^V═O for 1R, indicating that the potential of formation of Ru^V═O species for 1R is crucial for water oxidation catalysis under the employed conditions.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Ru-bda: Unique Molecular Water-Oxidation Catalysts with Distortion Induced Open Site and Negatively Charged Ligands

A water-oxidation catalyst with high intrinsic activity is the foundation for developing any type of water-splitting device. To celebrate its 10 years anniversary, in this Perspective we focus on the state-of-the-art molecular water-oxidation catalysts (MWOCs), the Ru-bda series (bda = 2,2'-bipyridine-6,6'-dicarboxylate), to offer strategies for the design and synthesis of more advanced MWOCs. The O-O bond formation mechanisms, derivatives, applications, and reasons behind the outstanding catalytic activities of Ru-bda catalysts are summarized and discussed. The excellent performance of the Ru-bda catalyst is owing to its unique structural features: the distortion induced 7-coordination and the carboxylate ligands with coordination flexibility, proton-transfer function as well as small steric hindrance. Inspired by the Ru-bda catalysts, we emphasize that the introduction of negatively charged groups, such as the carboxylate group, into ligands is an effective strategy to lower the onset potential of MWOCs. Moreover, distortion of the regular configuration of a transition metal complex by ligand design to generate a wide open site as the catalytic site for binding the substrate as an extra-coordination is proposed as a new concept for the design of efficient molecular catalysts. These inspirations can be expected to play a great role in not only water-oxidation catalysis but also other small molecule activation and conversion reactions involving artificial photosynthesis, such as CO₂ reduction and N₂ fixation reactions.

Effects of a strong π-accepting ancillary ligand on the water oxidation activity of weakly coupled binuclear ruthenium catalysts

Significant differences were found in the proton-coupled redox chemistry and catalytic behavior of the binuclear [{Ru(H2O)(bpz)}2(tpy2ph)](PF6)4 complex [bpz = 2,2'-bipyrazine; tpy2ph = 1,3-bis(4'-2,2':6',2''-terpyridin-4-yl)benzene] as compared with the structurally analogous derivative with 2,2'-bipyridine (bpy) instead of bpz. The differences were assigned to the stronger π-accepting character of bpz relative to bpy as the ancillary ligand. The expectation of a positive shift for the Ru-centered redox potentials was confirmed for the lower oxidation state species, but that trend was reversed in the formation of the high-valence catalytic active species as shown by a negative shift of 0.14 V for the potential of the [RuIV/V[double bond, length as m-dash]O] process. Moreover, DFT calculations indicated a significant decrease of about 15% on the spin density and oxyl character of the [RuV[double bond, length as m-dash]O]3+ fragment. The significantly lower kcat(O2) for the bpz system was attributed to these combined electronic effects.

An Overview of Significant Achievements in Ruthenium-Based Molecular Water Oxidation Catalysis

Fossil fuels (coal, oil, natural gas) are becoming increasingly disfavored as long-term energy options due to concerns of scarcity and environmental consequences (e.g., release of anthropogenic CO₂). Hydrogen gas, on the other hand, has gained popularity as a clean-burning fuel because the only byproduct from its reaction with O₂ is H₂O. In recent decades, hydrogen derived from water splitting has been a topic of extensive research. The bottleneck of the water splitting reaction is the difficult water oxidation step (2H₂O → O₂ + 4H⁺ + 4e⁻), which requires an effective and robust catalyst to overcome its high kinetic barrier. Research in water oxidation by molecular ruthenium catalysts enjoys a rich history spanning nearly 40 years. As the diversity of novel ligands continues to widen, the relationship between ligand geometry or electronics, and catalyst activity is undoubtedly becoming clearer. The present review highlights, in the authors’ opinion, some of the most impactful discoveries in the field and explores the evolution of ligand design that has led to the current state of the art.

Photoisomerization and thermal isomerization of ruthenium aqua complexes with chloro-substituted asymmetric bidentate ligands

A series of ruthenium complexes with chloro-substituted bidentate ligands, proximal-[Ru(tpy)(Cl-pyqu)L] n+ [n = 1 for L = Cl, and n = 2 for L = OH2, tpy = 2,2';6',2''-terpyridine, pyqu = 2-(2'-pyridyl)quinoline] were synthesized and their reversible photoisomerizations and thermal isomerizations were investigated experimentally. The crystal structures of the complexes indicated that introduction of a chloro substituent at the 4- or 4'-position of the pyqu ligand did not change the structure around the metal center from that of the non-substituted complex, proximal-[Ru(tpy)(pyqu)L] n+. In contrast, the 6'-substituted complexes had sterically hindered environments around the metal center. The ruthenium aqua complexes showed reversible photoisomerization between the proximal and distal isomers. The quantum yield for photoisomerization of the 6'-substituted ruthenium aqua complex was almost twice as large as those of the other derivatives. This is explained by weakening of the ligand field on the ruthenium center by introduction of a chloro substituent at the 6'-position. Thermal back isomerization from the distal isomer to the proximal one was observed for the 6'-substituted complex, but such reactions were not observed for the other derivatives. The steric hindrance in the 6'-substituted aqua complex enhanced both thermal isomerization and photoisomerization.