Electroreduction of Dioxygen for Fuel-Cell Applications: Materials and Challenges

Understanding the Electronic and Structural Effects in ORR Intermediate Binding on Anion-Substituted Zirconia Surfaces

For oxygen reduction reaction (ORR), the surface adsorption energies of O and OH* intermediates are key descriptors for catalytic activity. In this work, we investigate anion-substituted zirconia catalyst surfaces and determine that adsorption energies of O and OH* intermediates is governed by both structural and electronic effects. When the adsorption energies are not influenced by the structural effects of the catalyst surface, they exhibit a linear correlation with integrated crystal orbital Hamiltonian population (ICOHP) of the adsorbate-surface bond. The influence of structural effects, due to the re-optimisation slab geometry after adsorption of intermediate species, leads to stronger adsorption of intermediates. Our calculations show that there is a change in the bond order to accommodate the incoming adsorbate species which leads to stronger adsorption when both structural and electronic effects influence the adsorption phenomena. The insights into the catalyst-adsorbate interactions can guide the design of future ORR catalysts.

Thermochemical Activation of Wood with NaOH, KOH and H3PO4 for the Synthesis of Nitrogen-Doped Nanoporous Carbon for Oxygen Reduction Reaction

Carbonization of biomass residues followed by activation has great potential to become a safe process for the production of various carbon materials for various applications. Demand for commercial use of biomass-based carbon materials is growing rapidly in advanced technologies, including in the energy sector, as catalysts, batteries and capacitor electrodes. In this study, carbon materials were synthesized from hardwood using two carbonization methods, followed by activation with H3PO4, KOH and NaOH and doping with nitrogen. Their chemical composition, porous structure, thermal stability and structural order of samples were studied. It was shown that, despite the differences, the synthesized carbon materials are active catalysts for oxygen reduction reactions. Among the investigated carbon materials, NaOH-activated samples exhibited the lowest Tafel slope values, of -90.6 and -88.0 mV dec-1, which are very close to the values of commercial Pt/C at -86.6 mV dec-1.

A Review of Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Zinc-air batteries (ZABs) are gaining attention as an ideal option for various applications requiring high-capacity batteries, such as portable electronics, electric vehicles, and renewable energy storage. ZABs offer advantages such as low environmental impact, enhanced safety compared to Li-ion batteries, and cost-effectiveness due to the abundance of zinc. However, early research faced challenges due to parasitic reactions at the zinc anode and slow oxygen redox kinetics. Recent advancements in restructuring the anode, utilizing alternative electrolytes, and developing bifunctional oxygen catalysts have significantly improved ZABs. Scientists have achieved battery reversibility over thousands of cycles, introduced new electrolytes, and achieved energy efficiency records surpassing 70%. Despite these achievements, there are challenges related to lower power density, shorter lifespan, and air electrode corrosion leading to performance degradation. This review paper discusses different battery configurations, and reaction mechanisms for electrically and mechanically rechargeable ZABs, and proposes remedies to enhance overall battery performance. The paper also explores recent advancements, applications, and the future prospects of electrically/mechanically rechargeable ZABs.

Synergistic Niobium Doped Two-Dimensional Zirconium Diselenide: An Efficient Electrocatalyst for O2 Reduction Reaction

The development of high-activity and low-price cathodic catalysts to facilitate the electrochemically sluggish O2 reduction reaction (ORR) is very important to achieve the commercial application of fuel cells. Here, we have investigated the electrocatalytic activity of the two-dimensional single-layer Nb-doped zirconium diselenide (2D Nb-ZrSe2) toward ORR by employing the dispersion corrected density functional theory (DFT-D) method. Through our study, we computed structural properties, electronic properties, and energetics of the 2D Nb-ZrSe2 and ORR intermediates to analyze the electrocatalytic performance of 2D Nb-ZrSe2. The electronic property calculations depict that the 2D monolayer ZrSe2 has a large band gap of 1.48 eV, which is not favorable for the ORR mechanism. After the doping of Nb, the electronic band gap vanishes, and 2D Nb-ZrSe2 acts as a conductor. We studied both the dissociative and the associative pathways through which the ORR can proceed to reduce the oxygen molecule (O2). Our results show that the more favorable path for O2 reduction on the surface of the 2D Nb-ZrSe2 is the 4e- associative path. The detailed ORR mechanisms (both associated and dissociative) have been explored by computing the changes in Gibbs free energy (ΔG). All of the ORR reaction intermediate steps are thermodynamically stable and energetically favorable. The free energy profile for the associative path shows the downhill behavior of the free energy vs the reaction steps, suggesting that all ORR intermediate structures are catalytically active for the 4e- associative path and a high 4e- reduction pathway selectivity. Therefore, 2D Nb-ZrSe2 is a promising catalyst for the ORR, which can be used as an alternative ORR catalyst compared to expensive platinum (Pt).

Increasing Reduction Potentials of Type 1 Copper Center and Catalytic Efficiency of Small Laccase from Streptomyces coelicolor through Secondary Coordination Sphere Mutations

The key to type 1 copper (T1Cu) function lies in the fine tuning of the CuII/I reduction potential (E°'T1Cu ) to match those of its redox partners, enabling efficient electron transfer in a wide range of biological systems. While the secondary coordination sphere (SCS) effects have been used to tune E°'T1Cu in azurin over a wide range, these principles are yet to be generalized to other T1Cu-containing proteins to tune catalytic properties. To this end, we have examined the effects of Y229F, V290N and S292F mutations around the T1Cu of small laccase (SLAC) from Streptomyces coelicolor to match the high E°'T1Cu of fungal laccases. Using ultraviolet-visible absorption and electron paramagnetic resonance spectroscopies, together with X-ray crystallography and redox titrations, we have probed the influence of SCS mutations on the T1Cu and corresponding E°'T1Cu . While minimal and small E°'T1Cu increases are observed in Y229F- and S292F-SLAC, the V290N mutant exhibits a major E°'T1Cu increase. Moreover, the influence of these mutations on E°'T1Cu is additive, culminating in a triple mutant Y229F/V290N/S292F-SLAC with the highest E°'T1Cu of 556 mV vs. SHE reported to date. Further activity assays indicate that all mutants retain oxygen reduction reaction activity, and display improved catalytic efficiencies (kcat /KM ) relative to WT-SLAC.

Selective Four-Electron Reduction of Oxygen by a Nonheme Heterobimetallic CuFe Complex

We report herein the first nonheme CuFe oxygen reduction catalyst ([CuII (bpbp)(μ-OAc)2 FeIII ]2+ , CuFe-OAc), which serves as a functional model of cytochrome c oxidase and can catalyze oxygen reduction to water with a turnover frequency of 2.4×103  s-1 and selectivity of 96.0 % in the presence of Et3 NH+ . This performance significantly outcompetes its homobimetallic analogues (2.7 s-1 of CuCu-OAc with %H2 O2 selectivity of 98.9 %, and inactive of FeFe-OAc) under the same conditions. Structure-activity relationship studies, in combination with density functional theory calculation, show that the CuFe center efficiently mediates O-O bond cleavage via a CuII (μ-η1  : η2 -O2 )FeIII peroxo intermediate in which the peroxo ligand possesses distinctive coordinating and electronic character. Our work sheds light on the nature of Cu/Fe heterobimetallic cooperation in oxygen reduction catalysis and demonstrates the potential of this synergistic effect in the design of nonheme oxygen reduction catalysts.

Particle Size-Controlled Oxygen Reduction and Evolution Reaction Nanocatalysts Regulate Ru(bpy)32+'s Dual-potential Electrochemiluminescence for Sandwich Immunoassay

Multiple signal strategies remarkably improve the accuracy and efficiency of electrochemiluminescence (ECL) immunoassays, but the lack of potential-resolved luminophore pairs and chemical cross talk hinders their development. In this study, we synthesized a series of gold nanoparticles (AuNPs)/reduced graphene oxide (Au/rGO) composites as adjustable oxygen reduction reaction and oxygen evolution reaction catalysts to promote and modulate tris(2,2'-bipyridine) ruthenium(II) (Ru(bpy)₃²⁺)'s multisignal luminescence. With the increase in the diameter of AuNPs (3 to 30 nm), their ability to promote Ru(bpy)₃²⁺'s anodic ECL was first impaired and then strengthened, and cathodic ECL was first enhanced and then weakened. Au/rGOs with medium-small and medium-large AuNP diameters remarkably increased Ru(bpy)₃²⁺'s cathodic and anodic luminescence, respectively. Notably, the stimulation effects of Au/rGOs were superior to those of most existing Ru(bpy)₃²⁺ co-reactants. Moreover, we proposed a novel ratiometric immunosensor construction strategy using Ru(bpy)₃²⁺'s luminescence promoter rather than luminophores as tags of antibodies to achieve signal resolution. This method avoids signal cross talk between luminophores and their respective co-reactants, which achieved a good linear range of 10^-7 to 10^-1 ng/ml and a limit of detection of 0.33 fg/ml for detecting carcinoembryonic antigen. This study addresses the previous scarcity of the macromolecular co-reactants of Ru(bpy)₃²⁺, broadening its application in biomaterial detection. Furthermore, the systematic clarification of the detailed mechanisms for converting the potential-resolved luminescence of Ru(bpy)₃²⁺ could facilitate an in-depth understanding of the ECL process and should inspire new designs of Ru(bpy)₃²⁺ luminescence enhancers or applications of Au/rGOs to other luminophores. This work removes some impediments to the development of multisignal ECL biodetection systems and provides vitality into their widespread applications.

Fundamental Understanding of Nonaqueous and Hybrid Na-CO2 Batteries: Challenges and Perspectives

Alkali metal-CO₂ batteries, which combine CO₂ recycling with energy conversion and storage, are a promising way to address the energy crisis and global warming. Unfortunately, the limited cycle life, poor reversibility, and low energy efficiency of these batteries have hindered their commercialization. Li-CO₂ battery systems have been intensively researched in these aspects over the past few years, however, the exploration of Na-CO₂ batteries is still in its infancy. To improve the development of Na-CO₂ batteries, one must have a full picture of the chemistry and electrochemistry controlling the operation of Na-CO₂ batteries and a full understanding of the correlation between cell configurations and functionality therein. Here, recent advances in CO₂ chemical and electrochemical mechanisms on nonaqueous Na-CO₂ batteries and hybrid Na-CO₂ batteries (including O₂ -involved Na-O₂ /CO₂ batteries) are reviewed in-depth and comprehensively. Following this, the primary issues and challenges in various battery components are identified, and the design strategies for the interfacial structure of Na anodes, electrolyte properties, and cathode materials are explored, along with the correlations between cell configurations, functional materials, and comprehensive performances are established. Finally, the prospects and directions for rationally constructing Na-CO₂ battery materials are foreseen.

Synergistically Enhanced Oxygen Evolution Catalysis with Surface Modified Halloysite Nanotube

Synergistically increased oxygen evolution reaction (OER) of manganese oxide (MnO₂) catalyst is introduced with surface-modified halloysite nanotube (Fe₃O₄-HNTs) structure. The flake shaped MnO₂ catalyst is attached on the nanotube template (Fe₃O₄-HNTs) by series of wet chemical and hydrothermal method. The strong interaction between MnO₂ and Fe₃O₄-HNTs maximized active surface area and inter-connectivity for festinate charge transfer reaction for OER. The synergistical effect between Fe₃O₄ layer and MnO₂ catalyst enhance the Mn³⁺/Mn⁴⁺ ratio by partial replacement of Mn ions with Fe. The relatively increased Mn^3+/Mn⁴⁺ ratio on MnO₂@FHNTs induced <italic>σ</italic><italic>^*</italic> orbital (e_g) occupation close to single electron, improving the OER performances. The MnO₂@FHNTs catalyst exhibited the reduced overpotential of 0.42 V (E <italic>vs</italic>. RHE) at 10 mA/cm² and Tafel slope of (99 mV/dec), compared with that of MnO₂ with unmodified HNTs (0.65 V, 219 mV/dec) and pristine MnO₂ (0.53 V, 205 mV/dec). The present study provides simple and innovative method to fabricate nano fiberized OER catalyst for a broad application of energy conversion and storage systems.

Nitrogen doped carbonaceous materials as platinum free cathode electrocatalysts for oxygen reduction reaction (ORR)

Comparison of physicochemical properties and electrocatalytic behavior of different N-doped carbonaceous materials as potential catalysts for oxygen reduction reaction (ORR) was attended. Ball-milling of graphite with melamine and solvothermal treatment of graphite oxide, graphene nanoplatelets (GNP) with ammonia were used as preparation methods. Elemental analysis and N2 physisorption measurements revealed the synthesis of N-doped materials with strongly different morphological parameters. Contact angle measurements proved that all three samples had good wettability properties. According to analysis of XRD data and Raman spectra a higher nitrogen concentration corresponded to a smaller size of crystallites of the N-doped carbonaceous material. Surface total N content determined by XPS and bulk N content assessed by elemental analysis were close, indicating homogenous inclusion of N in all samples. Rotating disc electrode tests showed that these N-doped materials weremuch less active in acidic medium than in an alkaline environment. Although the presence of in-plane N species is regarded to be advantageous for the ORR activity, no particular correlation was found in these systems with any type of N species. According to Koutecky–Levich analysis, both the N-containing carbonaceous materials and the reference Pt/C catalyst displayed a typical one-step, four-electron ORR route. Both ball-milled sample with high N-content but with low SSA and solvothermally synthesized N-GNP with high SSA but low N content showed significant ORR activity. It could be concluded that beside the total N content other parameters such as SSA, pore structure, structural defects, wettability were also essential for achieving high ORR activity.

CuO-NiO binary transition metal oxide nanoparticle anchored on rGO nanosheets as high-performance electrocatalyst for the oxygen reduction reaction

To replace the existing noble-metal-based catalysts, developing highly efficient, stable electrocatalysts for oxygen reduction reactions for the increased current generation with lower overpotential is a demanding undertaking. In the present work, CuO-NiO/rGO nanocomposites were prepared using simple, cost-effective Co-precipitation methods. They act as highly effective electrocatalysts for oxygen reduction reactions in an alkaline medium. The structural characterizations demonstrate that prepared nanoparticles (≈13 nm) are tightly and effectively organized on reduced graphene oxide sheets. The electrochemical properties of the CuO, NiO nanoparticles and CuO-NiO, CuO-NiO/rGO nanocomposites were investigated. The results of the CuO-NiO/rGO nanocomposites revealed the high current density (2.9 × 10^-4 mA cm^-2), lower Tafel slope (72 mV dec^-1) and low hydrogen peroxide yield (15%) when compared to other prepared materials (CuO, NiO, and CuO-NiO). The reduced graphene oxide increases an electron transfer during the ORR process, while the CuO-NiO has variable oxidation states that promote electro-rich features. With the combination of CuO-NiO and rGO, the hybrid electrocatalysts specific surface area and charge transfer rate drastically increase. The investigations of the rotating ring-disk electrodes experiments indicate that the oxygen reduction process takes place on CuO-NiO/rGO through an efficient four-electron pathway. Our results propose a new approach to creating highly efficient and long-lasting electrocatalysts.

On the Performance of Proton Exchange Membrane Fuel Cells with a Catalyst Layer Fabricated Using an Inorganic Dispersant with Various Ultrasonic Mixing

This study utilizes both an inorganic dispersant, montmorillonite, and an organic dispersant (AS-1164) with 1.6 and 3.2 mg_Pt/cm² platinum coatings that underwent various frequencies of ultrasonic mixing (40, 80, and 120 kHz) to fabricate proton exchange membrane fuel cells (PEMFCs). The performance of these PEMFCs was then compared. At room temperature and a hydrogen gas flow rate of 15 sccm. After undergoing 3 h of vibration at 120 kHz, the 1.6 mg_Pt/cm² platinum-coated organic sample has a power density of 3.69 mW/cm², while its inorganic counterpart has an impressive power density of 4.49 mW/cm². In addition, using the 1.6 mg_Pt/cm² platinum-coated inorganic dispersants that underwent vibration at 40 kHz, its resulting power density is only 0.95 mW/cm². This result shows that the distribution of platinum coating is more even under high-frequency vibrations than low-frequency ones.

Ceria Boosting on In Situ Nitrogen-Doped Graphene Oxide for Efficient Bifunctional ORR/OER Activity

In the present work, a highly efficient and excellent electrocatalyst material for bifunctional oxygen reduction/evolution reaction (ORR/OER) was synthesized using the microwave-assisted hydrothermal method. In brief, ultrafine hexagonal cerium oxide (CeO₂) nanoparticles were tailored on the layered surface of in situ nitrogen-doped graphene oxide (NGO) sheets. The nanocomposites exhibited a high anodic onset potential of 0.925 V vs. RHE for ORR activity and 1.2 V for OER activity with a very high current density in 0.5 M KOH. The influence of oxygen cluster on Ce³⁺/Ce⁴⁺ ion decoration on outward/inward in situ nitrogen-coupled GO enhanced the physicochemical properties of composites and in turn increased electron transferability. The microwave-assisted hydrothermal coupling technique provides a higher density, active sites on CeO₂@NGO composites, and oxygen deficiency structures in ultrafine Ce-O particles and boosts higher charge transferability in the composites. It is believed that the physical states of Ce-N- C, Ce-C=O, and a higher amount of oxygen participation with ceria increase the density of composites that in turn increases the efficiency. N-doped graphene oxide promotes high current conduction and rapid electron transferability while reducing the external transport resistance in oxygen electrocatalysis by sufficient mass transfer through in-built channels. This study may provide insights into the knowledge of Ce-enabled bifunctional activity to guide the design of a robust catalyst for electrochemical performance.

Graphitic Aza-Fused π-Conjugated Networks: Construction, Engineering, and Task-Specific Applications

2D π-conjugated networks linked by aza-fused units represent a pivotal category of graphitic materials with stacked nanosheet architectures. Extensive efforts have been directed at their fabrication and application since the discovery of covalent triazine frameworks (CTFs). Besides the triazine cores, tricycloquinazoline and hexaazatriphenylene linkages are further introduced to tailor the structures and properties. Diverse related materials have been developed rapidly, and a thorough outlook is necessitated to unveil the structure-property-application relationships across multiple subcategories, which is pivotal to guide the design and fabrication toward enhanced task-specific performance. Herein, the structure types and development of related materials including CTFs, covalent quinazoline networks, and hexaazatriphenylene networks, are introduced. Advanced synthetic strategies coupled with characterization techniques provide powerful tools to engineer the properties and tune the associated behaviors in corresponding applications. Case studies in the areas of gas adsorption, membrane-based separation, thermo-/electro-/photocatalysis, and energy storage are then addressed, focusing on the correlation between structure/property engineering and optimization of the corresponding performance, particularly the preferred features and strategies in each specific field. In the last section, the underlying challenges and opportunities in construction and application of this emerging and promising material category are discussed.

Synthesis of Hollow N,P-Doped Carbon/Co2P2O7 Nanotubular Crystals as an Effective Electrocatalyst for the Oxygen Reduction Reaction

Herein, N,P-rich carbon/carbon/Co₂P₂O₇ hollow nanotubes with a multilayered wall structure were successfully fabricated for the ORR electrocatalyst. The hollow tube structure catalysts were obtained by carbonizing Co₂P₂O₇/C coated with the phytate-doped PANI. The Co₂P₂O₇/C was obtained by phosphorylating a basic cobalt carbonate with phytic acid (PA). Onset and positive half-wave potentials were measured at 0.90 and 0.84 V, respectively, with a diffusion-limited current density of 4.58 mA/cm². Effect of the thickness of polyaniline (PANI) in the electrocatalyst precursor was also investigated. The specific surface area as well as the content of graphitic N altered as the time of PANI polymerization increased, resulting in remarkably different catalytic activities. This study of hollow nanotube catalysts exhibits efficient noble-metal-free oxygen reduction reaction electrocatalysts for other chemical systems, which will provide abundant electrochemical active centers and sufficient energy.

Fe/Co/N-C/graphene derived from Fe/ZIF-67/graphene oxide three dimensional frameworks as a remarkably efficient and stable catalyst for the oxygen reduction reaction

The development of non-noble metal catalysts with high-performance, long stability and low-cost is of great importance for fuel cells, to promote the oxygen reduction reaction (ORR). Herein, Fe/Co/N-C/graphene composites were easily prepared by using Fe/ZIF-67 loaded on graphene oxide (GO). The Fe/Co/porous carbon nanoparticles were uniformly dispersed on graphene with high specific surface area and large porosity, which endow high nitrogen doping and many more active sites with better ORR performance than the commercial 20 wt% Pt/C. Therefore, Fe/Co/N-C/graphene composites exhibited excellent ORR activity in alkaline media, with higher initial potential (0.91 V) and four electron process. They also showed remarkable long-term catalytic stability with 96.5% current retention after 12 000 s, and outstanding methanol resistance, compared with that of 20 wt% Pt/C catalysts. This work provides an effective strategy for the preparation of non-noble metal-based catalysts, which could have significant potential applications, such as in lithium-air batteries and water-splitting devices.

Noble Metal-Based Multimetallic Nanoparticles for Electrocatalytic Applications

Noble metal-based multimetallic nanoparticles (NMMNs) have attracted great attention for their multifunctional and synergistic effects, which offer numerous catalytic applications. Combined experimental and theoretical studies have enabled formulation of various design principles for tuning the electrocatalytic performance through controlling size, composition, morphology, and crystal structure of the nanoparticles. Despite significant advancements in the field, the chemical synthesis of NMMNs with ideal characteristics for catalysis, including high activity, stability, product-selectivity, and scalability is still challenging. This review provides an overview on structure-based classification and the general synthesis of NMMN electrocatalysts. Furthermore, postsynthetic treatments, such as the removal of surfactants to optimize the activity, and utilization of NMMNs onto suitable support for practical electrocatalytic applications are highlighted. In the end, future direction and challenges associated with the electrocatalysis of NMMNs are covered.

Recent advances in tuning redox properties of electron transfer centers in metalloenzymes catalyzing oxygen reduction reaction and H2 oxidation important for fuel cells design

Current fuel-cell catalysts for oxygen reduction reaction (ORR) and H₂ oxidation use precious metals and, for ORR, require high overpotentials. In contrast, metalloenzymes perform their respective reaction at low overpotentials using earth-abundant metals, making metalloenzymes ideal candidates for inspiring electrocatalytic design. Critical to the success of these enzymes are redox-active metal centers surrounding the enzyme active sites that ensure fast electron transfer (ET) to or away from the active site, by tuning the catalytic potential of the reaction as observed in multicopper oxidases but also in dictating the catalytic bias of the reaction as realized in hydrogenases. This review summarizes recent advances in studying these ET centers in multicopper oxidases and heme-copper oxidases that perform ORR and hydrogenases in carrying out H₂ oxidation. Insights gained from understanding how the reduction potential of the ET centers effects reactivity at the active site in both the enzymes and their models are provided.

Influence of Chemical Activation Temperatures on Nitrogen-Doped Carbon Material Structure, Pore Size Distribution and Oxygen Reduction Reaction Activity

The goal of this research was to synthesize activated nitrogen-doped nanocarbons with high specific surface area and adjustable pore size distribution using wood charcoal as a raw material. The resulting carbon materials were tested for possible application as oxygen reduction reaction catalysts in alkaline media. Activated carbons were obtained using a thermochemical activation method with NaOH. Nitrogen was introduced into activated carbons using dicyandiamide solution. It was demonstrated that the content of introduced nitrogen depends on oxygen content in the structure of the activated carbon. The oxygen reduction reaction activity of the activated and nitrogen-doped carbon material was comparable with a commercial 20% Pt/C catalyst. Electrocatalytic properties of the synthesized N-doped wood-derived carbon catalysts may be associated with the highly developed surface area, specific ratio of micro- and mesopores, as well as the high percentage of pyridinic nitrogen.

Recent progress of electrocatalysts for oxygen reduction in fuel cells

Oxygen reduction reaction (ORR) has gradually been in the limelight in recent years because of its great application potential for fuel cells and rechargeable metal-air batteries. Therefore, significant issues are increasingly focused on developing effective and economical ORR electrocatalysts. This review begins with the reaction mechanisms and theoretical calculations of ORR in acidic and alkaline media. The latest reports and challenges in ORR electrocatalysis are traced. Most importantly, the latest advances in the development of ORR electrocatalysts are presented in detail, including platinum group metal (PGM), transition metal, and carbon-based electrocatalysts with various nanostructures. Furthermore, the development prospects and challenges of ORR electrocatalysts are speculated and discussed. These insights would help to formulate the design guidelines for highly-active ORR electrocatalysts and affect future research to obtain new knowledge for ORR mechanisms.

A highly durable CoOx/N-doped graphitized-nano-diamond electrocatalyst for oxygen reduction reaction

Oxygen reduction reaction (ORR) occupies a pivotal position in fuel cell applications, and it is a challenge to obtain highly durable ORR catalysts. Herein, porous cobalt oxide microsphere growing at the surface of on nitrogen-doped graphitized-nano-diamond (CoO_x/N-GND) was prepared using hydrothermal and subsequent heat treatment process. Porous cobalt oxide of high specific surface area could expose more surface Co²⁺that act as active sites than bulk one does. The doping of nitrogen also promotes the catalytic activity. Besides, nano-diamond (ND) ofsp³hybrid structure was used as an electronic conduction carriers of ultrahigh stability to improve the durability of catalytic composite. Prepared CoO_x/N-GND shows a satisfactory half-wave potential of 0.82 V (versus RHE), which is close to that of Pt/C (0.85 V), an excellent methanol tolerance and a lower activity loss after 5000 cycles. These merits inspire the application of CoO_x/N-GND as the cathode of Zn-air battery and the battery performance was evaluated in this work. In general, this work highlights an innovate approach to design and prepare highly durable catalyst.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Long-term operation of bio-catalyzed cathodes within continuous flow membrane-less microbial fuel cells

Microorganisms were observed to facilitate cathodic oxygen reduction and enhance cathode performance of microbial fuel cells (MFCs). However, the long-term activity and stability of bio-catalyzed cathode needs to be explored. This study evaluated the long-term performance of bio-catalyzed cathode and iron(II) phthalocyanine (FePc)-catalyzed cathode MFCs through effluent water quality, electricity production and electrochemical impedance spectroscopy (EIS) analysis under different scenarios, including conventional wastewater treatment and energy harvesting using a power management system (PMS). During the continuous operation, both systems demonstrated high chemical oxygen demand and ammonium removal, but bio-catalyzed cathode MFCs could achieve significantly better total nitrogen removal than FePc-catalyzed cathode MFCs. The FePc-coated cathode showed constant cathode potential during the entire operation period, but the biocathode showed varied but step-wise increased cathode potential to achieve more than 500 mV versus the standard hydrogen electrode, likely due to the gradual enrichment of biocathode biofilm. EIS analysis revealed that biocathode had higher ohmic resistance than bare carbon felt cathode but the microbial biofilm could largely decrease polarization resistance of cathode material. Microbial community analysis has shown the presence of nitrifying and denitrifying bacteria in the bio-catalyzed cathode biofilm. When connecting PMS, both bio-catalyzed cathode and FePc-catalyzed cathode MFCs successfully charged a capacitor, but the bio-catalyzed cathode MFC voltage significantly dropped to less than 100 mV after charging for 91 h, and gradually recovered when disconnecting PMS. This study has demonstrated the potential application of oxygen reduction bio-catalyzed cathode MFCs for continuous wastewater treatment and energy harvesting for long period of time.

Reconstructing 1D Fe Single-atom Catalytic Structure on 2D Graphene Film for High-Efficiency Oxygen Reduction Reaction

The ordinary intrinsic activity and disordered distribution of metal sites in zero/one-dimensional (0D/1D) single-atom catalysts (SACs) lead to inferior catalytic efficiency and short-term endurance in the oxygen reduction reaction (ORR), which restricts the large-scale application of hydrogen-oxygen fuel cells and metal-air batteries. To improve the activity of SACs, a mild synthesis method was chosen to conjugate 1D Fe SACs with 2D graphene film (Fe SAC@G) that realized a composite structure with well-ordered atomic-Fe coordination configuration. The product exhibits outstanding ORR electrocatalytic efficiency and stability in 0.1 M KOH aqueous solution. DFT-D computational results manifest the intrinsic ORR activity of Fe SAC@G originated from the newly-formed FeN₄ -O-FeN₄ bridge structure with moderate adsorption ability towards ORR intermediates. These findings provide new ways for designing SACs with high activity and long-term stability.

A review on recent developments in electrochemical hydrogen peroxide synthesis with a critical assessment of perspectives and strategies

Electrochemical hydrogen peroxide synthesis using two-electron oxygen electrochemistry is an intriguing alternative to currently dominating environmentally unfriendly and potentially hazardous anthraquinone process and noble metals catalysed direct synthesis. Electrocatalytic two-electron oxygen reduction reaction (ORR) and water oxidation reaction (WOR) are the source of electrochemical hydrogen peroxide generation. Various electrocatalysts have been used for the same and were characterized using several electroanalytical, chemical, spectroscopic and chromatographic tools. Though there have been a few reviews summarizing the recent developments in this field, none of them have unified the approaches in catalysts' design, criticized the ambiguities and flaws in the methods of evaluation, and emphasized the role of electrolyte engineering. Hence, we dedicated this review to discuss the recent trends in the catalysts' design, performance optimization, evaluation perspectives and their appropriateness and opportunities with electrolyte engineering. In addition, particularized discussions on fundamental oxygen electrochemistry, additional methods for precise screening, and the role of solution chemistry of synthesized hydrogen peroxide are also presented. Thus, this review discloses the state-of-the-art in an unpresented view highlighting the challenges, opportunities, and alternative perspectives.

Local probe investigation of electrocatalytic activity

As the world energy crisis remains a long-term challenge, development and access to renewable energy sources are crucial for a sustainable modern society. Electrochemical energy conversion devices are a promising option for green energy supply, although the challenge associated with electrocatalysis have caused increasing complexity in the materials and systems, demanding further research and insights. In this field, scanning probe microscopy (SPM) represents a specific source of knowledge and understanding. Thus, our aim is to present recent findings on electrocatalysts for electrolysers and fuel cells, acquired mainly through scanning electrochemical microscopy (SECM) and other related scanning probe techniques. This review begins with an introduction to the principles of several SPM techniques and then proceeds to the research done on various energy-related reactions, by emphasizing the progress on non-noble electrocatalytic materials.

Exfoliated Single Layers of Layered Cobalt Hydroxide for Ultrafine Co3 O4 Nanoparticles on Graphene Nanosheets as an Efficient Electrocatalyst for Oxygen Reduction

A highly effective way to produce an oxygen reduction electrocatalyst was developed through the self-assembly of exfoliated single layers of cobalt hydroxide (Co(OH)₂ ) and graphene oxide (GO). These 2D materials have complete contact with one another because of their physical flexibility and the electrostatic attraction between negatively charged GO and positively charged Co(OH)₂ layers. The strong coupling induces transformation of the Co(OH)₂ single layer into a discrete nanocrystal of spinel Co₃ O₄ with an average size of 8 nm on reduced GO (RGO) during calcination, which could not be obtained with bulk-layered cobalt hydroxide because of its rapid layer collapse. The ultrafine Co₃ O₄ /RGO hybrid exhibited not only comparable performance in the oxygen reduction reaction but also higher durability compared with the commercial 20 wt % Pt/C catalyst.

Electroactive Covalent Organic Frameworks: Design, Synthesis, and Applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with tailorable compositions, porosities, functionalities, and intrinsic chemical stability. The incorporation of electroactive moieties in the structure transforms COFs into electroactive materials with great potential for energy-related applications. Herein, the recent advances in the design and use of electroactive COFs as capacitors, batteries, conductors, fuel cells, water-splitting, and electrocatalysis are addressed. Their remarkable performance is discussed and compared with other porous materials; hence, perspectives in the development of electroactive COFs are presented.

Highly Active Wood-Derived Nitrogen-Doped Carbon Catalyst for the Oxygen Reduction Reaction

In this recent decade, great interest has risen to develop metal-free and cheap, biomass-derived electrocatalysts for oxygen reduction reaction (ORR). Herein, we report a facile strategy to synthesize an electrochemically active nanocarbon material from the renewable and biological resource, wood biomass. The ORR activity of the catalyst material was investigated in 0.1 M KOH solution by employing the rotating disc electrode method. Scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Raman spectroscopy were employed to obtain more information about the catalyst material's morphology and composition. The material exhibits outstanding electrocatalytic activity with low onset potential and high current density, similar to that of a commercial Pt/C catalyst in an alkaline medium. The results clearly ascertain that wooden biomass can be easily transformed into novel carbon nanostructures with superior ORR activity and possibility to be used in fuel cells and metal-air batteries.

Direct Synthesis of Intermetallic Platinum-Alloy Nanoparticles Highly Loaded on Carbon Supports for Efficient Electrocatalysis

Compared to nanostructured platinum (Pt) catalysts, ordered Pt-based intermetallic nanoparticles supported on a carbon substrate exhibit much enhanced catalytic performance, especially in fuel cell electrocatalysis. However, direct synthesis of homogeneous intermetallic alloy nanocatalysts on carbonaceous supports with high loading is still challenging. Herein, we report a novel synthetic strategy to directly produce highly dispersed MPt alloy nanoparticles (M = Fe, Co, or Ni) on various carbon supports with high catalyst loading. Importantly, a unique bimetallic compound, composed of [M(bpy)₃]²⁺ cation (bpy = 2,2'-bipyridine) and [PtCl₆]^2- anion, evenly decomposes on carbon surface and forms uniformly sized intermetallic nanoparticles with a nitrogen-doped carbon protection layer. The excellent oxygen reduction reaction (ORR) activity and stability of the representative reduced graphene oxide (rGO)-supported L1₀-FePt catalyst (37 wt %-FePt/rGO), exhibiting 18.8 times higher specific activity than commercial Pt/C catalyst without degradation over 20 000 cycles, well demonstrate the effectiveness of our synthetic approach toward uniformly alloyed nanoparticles with high homogeneity.

Selective single-atom electrocatalysts: a review with a focus on metal-doped covalent triazine frameworks

Single-atom electrocatalysts (SACs), which comprise singly isolated metal sites supported on heterogeneous substrates, have attracted considerable recent attention as next-generation electrocatalysts for various key reactions from the viewpoint of the environment and energy. Not only electrocatalytic activity but also selectivity can be precisely tuned via the construction of SACs with a defined coordination structure, such as homogeneous organometallics. Covalent organic frameworks (COFs) are promising supports for single-atom sites with designed coordination environments due to their unique physicochemical properties, which include porous structures, robustness, a wide range of possible designs, and abundant heteroatoms to coordinate single-metal sites. The rigid frameworks of COFs can hold unstable single-metal atoms, such as coordinatively unsaturated sites or easily aggregated Pt-group metals, which exhibit unique electrocatalytic selectivity. This minireview summarizes recent advances in the selective reactions catalysed by SACs, mainly those supported on triazine-based COFs.

Single-atom electrocatalysts (SACs) have attracted considerable attention as selective electrocatalysts. Metal-doped covalent triazine frameworks will be a novel platform for selective SACs to solve energy and environmental issues.

Proton exchange membrane with plasmon-active surface for enhancement of fuel cell effectivity

The action of fuel cells with proton-exchanged membranes (PEMs) requires the implementation of the hydrogen oxidation reaction (HOR) and the oxygen reduction reaction (ORR) on the opposite sides of the PEMs. Recently, based on several models of electrochemical reactions a significant decrease in the thermodynamic activation barrier of both reactions under plasmon assistance was reported. In this work, we propose the design of a PEM fuel cell with a plasmon-active catalytic surface providing plasmonic triggering and enhancement of fuel cell efficiency. In particular, we deposited bimetallic (Au@Pt) nanostructures on the PEM surface and integrated them into the fuel cell design. Plasmon excitation occurs on the Au nanostructures under light illumination at the corresponding NIR wavelength, while the Pt shell is responsible for the introduction of catalytic sites. Light illumination results in a significant enhancement of the electric current produced by the fuel cell. In particular, the electric current increased several times. Control experiments indicated that the observed enhancement takes place only when the light wavelength is in compliance with the plasmon absorption band and the contribution from thermal effects is negligible. The present approach for the introduction of plasmon assistance into the design of advanced fuel cells makes them suitable for increasing the fuel cell efficiency under sunlight.

Gram-scale synthesis of alkoxide-derived nitrogen-doped carbon foam as a support for Fe-N-C electrocatalysts

Non-platinum group metal (non-PGM) catalysts for the oxygen reduction reaction (ORR) are set to reduce the cost of polymer electrolyte membrane fuel cells (PEFCs) by replacing platinum at the cathode. We previously developed unique nitrogen-doped carbon foams by template-free pyrolysis of alkoxide powders synthesized using a high temperature and high pressure solvothermal reaction. These were shown to be effective ORR electrocatalysts in alkaline media. Here, we present a new optimised synthesis protocol which is carried out at ambient temperature and pressure, enabling us to safely increase the batch size to 2 g, increase the yield by 60%, increase the specific surface area to 1866 m² g^-1, and control the nitrogen content (between 1.0 and 5.2 at%). These optimized nitrogen-doped carbon foams are then utilized as effective supports for Fe-N-C catalysts for the ORR in acid media, whilst multiphysics modelling is used to gain insight into the electrochemical performance. This work highlights the importance of the properties of the carbon support in the design of Pt-free electrocatalysts.

A Paper-Based Microfluidic Fuel Cell Using Soft Drinks as a Renewable Energy Source

The research aims were to construct an air-breathing paper-based microfluidic fuel cell (paper-based μ FC) and to evaluated it with different soft drinks to provide energy for their prospective use in portable devices as an emergency power source. First, in a half-cell configuration, cyclic voltammetry showed that glucose, maltose, and fructose had specific oxidation zones in the presence of platinum-ruthenium on carbon (PtRu/C) when they were individual. Still, when they were mixed, glucose was observed to be oxidized to a greater extent than fructose and maltose. After, when a paper-based μ FC was constructed, PtRu/C and platinum on carbon (Pt/C) were used as anode and cathode, the performance of this μ FC was mostly influenced by the concentration of glucose present in each soft drink, obtaining maximum power densities at room temperature of 0.061, 0.063, 0.060, and 0.073 mW cm − 2 for Coca Cola ® , Pepsi ® , Dr. Pepper ® , and 7up ® , respectively. Interestingly, when the soft drinks were cooled, the performance was increased up to 85%. Furthermore, a four-cell stack μ FC was constructed to demonstrate its usefulness as a possible power supply, obtaining a power density of 0.4 mW cm − 2 , using Coca Cola ® as fuel and air as oxidant. Together, the results of the present study indicate an alternative application of an μ FC using soft drinks as a backup source of energy in emergencies.