Color Removal from Wastewater Using Low-Cost Activated Carbon Derived from Agricultural Waste Material

Adsorption of methyl orange on low-cost adsorbent natural materials and modified natural materials: a review

Recently a large number of extensive studies have amassed that describe the removal of dyes from water and wastewater using natural adsorbents and modified materials. Methyl orange dye is found in wastewater streams from various industries that include textiles, plastics, printing and paper among other sources. This article reviews methyl orange adsorption onto natural and modified materials. Despite many techniques available, adsorption stands out for efficient water and wastewater treatment for its ease of operation, flexibility and large-scale removal of colorants. It also has a significant potential for regeneration recovery and recycling of adsorbents in comparison to other water treatment methods. The adsorbents described herein were classified into five categories based on their chemical composition: bio-sorbents, activated carbon, biochar, clays and minerals, and composites. In this review article, we want to demonstrate the capacity of natural and modified materials for dye adsorption which can yield significant improvements to the adsorption capacity of dyes such as methyl orange. In addition, the effect of critical variables including contact time, initial methyl orange concentration, dosage of adsorbent, pH, temperature and mechanism on the adsorption efficiency will be covered as part of this literature review.

Iron-loaded carbon black prepared via chemical vapor deposition as an efficient peroxydisulfate activator for the removal of rhodamine B from water

The excessive use of organic pollutants like organic dyes, which enter the water environment, has led to a significant environmental problem. Finding an efficient method to degrade these pollutants is urgent due to their detrimental effects on aquatic organisms and human health. Carbon-based catalysts are emerging as highly promising and efficient alternatives to metal catalysts in Fenton-like systems. They serve as persulfate activators, effectively eliminating recalcitrant organic pollutants from wastewater. In this study, iron-loaded carbon black (Fe-CB) was synthesized from tire waste using chemical vapor deposition (CVD). Fe-CB exhibited high efficiency as an activator of peroxydisulfate (PDS), facilitating the effective degradation and mineralization of rhodamine B (RhB) in water. A batch experiment and series characterization were conducted to study the morphology, composition, stability, and catalytic activity of Fe-CB in a Fenton-like system. The results showed that, at circumneutral pH, the degradation and mineralization efficiency of 20 mg L-1 RhB reached 92% and 48% respectively within 60 minutes. Fe-CB exhibited excellent reusability and low metal leaching over five cycles while maintaining almost the same efficiency. The degradation kinetics of RhB was found to follow a pseudo-first-order model. Scavenging tests revealed that the dominant role was played by sulfate (SO4-˙) and superoxide (O2-˙) radicals, whereas hydroxyl radicals (OH˙) and singlet oxygen (1O2) played a minor role in the degradation process. This study elucidates the detailed mechanism of PDS activation by Fe-CB, resulting in the generation of reactive oxygen species. It highlights the effectiveness of Fe-CB/PDS in a Fenton-like system for the treatment of water polluted with organic dye contaminants. The research provides valuable insights into the potential application of carbon black derived from tire waste for environmental remediation.

Facile Synthesis of Vanadium Oxide/Carbon Spheres-Doped Nickel Oxide Functioned as a Nanocatalyst and Bactericidal Behavior with Molecular Docking Analysis

Vanadium oxide (V₂O₅) and carbon spheres (Cs)-doped NiO₂ nanostructures (NSs) were prepared using the co-precipitation approach. Several spectroscopic and microscopic techniques, including X-ray diffraction (XRD), UV-vis, FTIR, TEM, and HR-TEM investigations, were used to describe the as-synthesized NSs. The XRD pattern exhibited the hexagonal structure, and the crystallite size of pristine and doped NSs was calculated as 29.3, 32.8, 25.79, and 45.19 nm, respectively. The control sample (NiO₂) showed maximum absorption at 330 nm, and upon doping, a redshift was observed, leading to decreased band gap energy from 3.75 to 3.59 eV. TEM of NiO₂ shows agglomerated nonuniform nanorods exhibited with various nanoparticles without a specific orientation; a higher agglomeration was observed upon doping. The (4 wt %) V₂O₅/Cs-doped NiO₂ NSs served as superior catalysts with a 94.21% MB reduction in acidic media. The significant antibacterial efficacy was estimated against Escherichia coli by measuring the zone of inhibition (3.75 mm). Besides their bactericidal analysis, V₂O₅/Cs-doped NiO₂ was shown to have a binding score of 6.37 for dihydrofolate reductase and a binding score of 4.31 for dihydropteroate synthase in an in silico docking study of E. coli.

Comprehensive evaluation of zeolite/marine alga nanocomposite in the removal of waste dye from industrial wastewater

A systematic study integrating laboratory, analytical, and case study field trial was conducted to figure out the effective adsorbent that could be used for the removal of Congo red (CR) dye from industrial wastewater effluent. The ability of the zeolite (Z) to adsorb CR dye from aqueous solutions was evaluated after it was modified by the Cystoseira compressa algae (CC) (Egyptian marine algae). Zeolite, CC algae were combined together in order to form the new composite zeolite/algae composite (ZCC) using wet impregnation technique and then characterized by the aid of different techniques. A noticeable enhancement in the adsorption capacity of newly synthesized ZCC was observed if compared to Z and CC, particularly at low CR concentrations. The batch style experiment was selected to figure out the impact of various experimental conditions on the adsorption behavior of different adsorbents. Moreover, isotherms and kinetics were estimated. According to the experimental results, the newly synthesized ZCC composite might be applied optimistically as an adsorbent for eliminating anionic dye molecules from industrial wastewater at low dye concentration. The dye adsorption on Z and ZCC followed the Langmuir isotherm, while that of CC followed the Freundlich isotherm. The dye adsorption kinetics on ZCC, CC, and Z were agreed with Elovich, intra-particle, and pseudo-second-order kinetic models, correspondingly. Adsorption mechanisms were also assessed using Weber's intraparticle diffusion model. Finally, field tests showed that the newly synthesized sorbent has a 98.5% efficient in eliminating dyes from industrial wastewater, authorizing the foundation for a recent eco-friendly adsorbent that facilitate industrial wastewater reuse.

Respiration-based investigation of adsorbent-bioprocess compatibility

BACKGROUND

The efficiency of downstream processes plays a crucial role in the transition from conventional petrochemical processes to sustainable biotechnological production routes. One promising candidate for product separation from fermentations with low energy demand and high selectivity is the adsorption of the target product on hydrophobic adsorbents. However, only limited knowledge exists about the interaction of these adsorbents and the bioprocess. The bioprocess could possibly be harmed by the release of inhibitory components from the adsorbent surface. Another possibility is co-adsorption of essential nutrients, especially in an in situ application, making these nutrients unavailable to the applied microorganism.

RESULTS

A test protocol investigating adsorbent-bioprocess compatibility was designed and applied on a variety of adsorbents. Inhibitor release and nutrient adsorption was studied in an isolated manner. Respiratory data recorded by a RAMOS device was used to assess the influence of the adsorbents on the cultivation in three different microbial systems for up to six different adsorbents per system. While no inhibitor release was detected in our investigations, adsorption of different essential nutrients was observed.

CONCLUSION

The application of adsorption for product recovery from the bioprocess was proven to be generally possible, but nutrient adsorption has to be assessed for each application individually. To account for nutrient adsorption, adsorptive product separation should only be applied after sufficient microbial growth. Moreover, concentrations of co-adsorbed nutrients need to be increased to compensate nutrient loss. The presented protocol enables an investigation of adsorbent-bioprocess compatibility with high-throughput and limited effort.

Reusable Sugar-Based Gelator for Marine Oil-Spill Recovery and Waste Water Treatment

In this work, the gelation ability of a series of novel pyridine-based glucose tailored gelators (DPHAEN, DPHABN, and DPHAHN) with a flexible alkyl chain has been examined in binary solvent mixtures using a number of techniques, for example, UV spectroscopy, FT-IR spectroscopy, NMR spectroscopy, rheology measurement, SEM, XRD, and computational study. Proposed herein is an environment-friendly method to realize toxic dye separation and oil/water separation. It has been found that gels in a selective binary solvent mixture are efficient reusable absorbers of toxic dye molecules. A new gravitational force-driven, simple one-step, toxic dye removal and oil-water separation method is presented for sustainable filtration of waste water and simultaneous collection of oil. The gel column also showed high stability and reusability over repeated use and can be easily scaled for efficient clean-up of a large number of toxic dyes and oil spills present in water. Studies also exposed that the gel column can simultaneously separate dye molecules and mineral oils from water. This simple, green, and efficient method overcomes a nontrivial hurdle for environmentally safe separation of toxic dyes as well as oil/water mixtures and offers insights into the design of advanced materials for practical oil/water separation.

Experimental and theoretical study of catalytic dye degradation and bactericidal potential of multiple phase Bi and MoS2 doped SnO2 quantum dots†

In the present study, different concentrations (1 and 3%) of Bi were incorporated into a fixed amount of molybdenum disulfide (MoS₂) and SnO₂ quantum dots (QDs) by co-precipitation technique. This research aimed to increase the efficacy of dye degradation and bactericidal behavior of SnO₂. The high recombination rate of SnO₂ can be decreased upon doping with two-dimensional materials (MoS₂ nanosheets) and Bi metal. These binary dopants-based SnO₂ showed a significant role in methylene blue (MB) dye degradation in various pH media and antimicrobial potential as more active sites are provided by nanostructured MoS₂ and Bi³⁺ is responsible for producing a variety of different oxygen vacancies within SnO₂. The prepared QDs were described via morphology, optical characteristics, elemental composition, functional group, phase formation, crystallinity, and d-spacing. In contrast, antimicrobial activity was checked at high and low dosages against Escherichia coli (E. coli) and the inhibition zone was calculated utilizing a Vernier caliper. Furthermore, prepared samples have expressed substantial antimicrobial effects against E. coli. To further explore the interactions between the MB and Bi/MoS₂–SnO₂ composite, we modeled and calculated the MB adsorption using density functional theory and the Heyd–Scuseria–Ernzerhof hybrid (HSE06) approach. There is a relatively strong interaction between the MB molecule and Bi/MoS₂–SnO₂ composite.

In the present study, different concentrations (1 and 3%) of Bi were incorporated into a fixed amount of molybdenum disulfide and SnO₂ quantum dots by co-precipitation technique. This research aimed to increase the efficacy of dye degradation and bactericidal behavior of SnO₂.

Conversion of foliar residues of Sansevieria trifasciata into adsorbents: dye adsorption in continuous and discontinuous systems

The study analyzed the potential of leaf powder prepared from the residual leaves of the species Sansevieria trifasciata, as a potential adsorbent for methylene blue (MB) removal. The equilibrium was reached fast for almost all concentrations after 60 min, obtaining the maximum capacity of 139.98 mg g^-1 for 200 mg L^-1. The increase in temperature disfavored the dye adsorption, with the maximum adsorption capacity of 225.8 mg g^-1, observed for 298 K. The thermodynamic parameters confirmed that the adsorption process is spontaneous and exothermic. A direct sloping curve was established for the fixed bed, with breakthrough time (t_b), column stoichiometric capacities (q_eq), and the mass transfer zone lengths (Z_m) were 1430, 1130, and 525 min; 60.48, 187.01, and 322.65 mg g^-1; and 8.81, 11.28, and 10.71 cm, for 100, 200, and 500 mg L^-1, respectively. Furthermore, in a mixture of several dyes, the adsorbent obtained the removal of 51% of the color.

The enhanced photocatalytic performance and first-principles computational insights of Ba doping-dependent TiO2 quantum dots

Degradation in the presence of visible light is essential for successfully removing dyes from industrial wastewater, which is pivotal for environmental and ecological safety. In recent years, photocatalysis has emerged as a prominent technology for wastewater treatment. This study aimed to improve the photocatalytic efficiency of synthesized TiO₂ quantum dots (QDs) under visible light by barium (Ba) doping. For this, different weight ratios (2% and 4%) of Ba-doped TiO₂ QDs were synthesized under ambient conditions via a simple and modified chemical co-precipitation approach. The QD crystal structure, functional groups, optical features, charge-carrier recombination, morphological properties, interlayer spacing, and presence of dopants were analyzed. The results showed that for 4% Ba-doped TiO₂, the effective photocatalytic activity in the degradation process of methylene blue (MB) dye was 99.5% in an alkaline medium. Density functional theory analysis further corroborated that the band gap energy was reduced when Ba was doped into the TiO₂ lattice, implying a considerable redshift of the absorption edge due to in-gap states near the valence band.

Color removal for large-scale interbasin water transfer: Experimental comparison of five sorption media

The increasing needs of drinking water due to population growth requires seeking for new tap water sources. However, these large-scale tap water sources are oftentimes abundant with dissolved natural organic matter (NOM), such as tannic acid issue causing color in water. If not removed at the source locations beforehand, NOM would impact coagulation and flocculation unit, and/or become precursors to prompt the production of disinfectant by-products after chlorination in drinking water treatment. This study focuses on developing and testing a suite of cost-effective, scalable, adaptable, and sustainable sorption media that can be implemented near the source locations of tap water as a pretreatment option to remove color for a long-distance interbasin transfer. Within the five tested sorption media, a media recipe of Zero-valent-Iron and Perlite based Green Sorption Media (ZIPGEM) with ingredients of 85% sand, 5% clay, 6% zero-valent-iron (ZVI) and 4% perlite by volume stood out as the best option for color removal. Findings showed that ZIPGEM can maintain a color removal of ∼77% for about 14,080 min, maintaining the effluent concentration below 40 Pt-Co units given the influent condition of 175 ± 10 Pt-Co units. A recovery on the adsorption capacity of ZIPGEM was observed around 40,000 min due to synergetic effects among several different ingredients of recycled ZVI, clay, sand, and perlites. ZIPGEM can be applied to industrial wastewater treatment for dye removal as well.

Evaluation of bactericidal potential and catalytic dye degradation of multiple morphology based chitosan/polyvinylpyrrolidone-doped bismuth oxide nanostructures

In this study, 0.02 and 0.04 wt% of chitosan (CS) were successfully incorporated in a fixed amount of polyvinylpyrrolidone (PVP)-doped Bi₂O₃ nanostructures (NSs) via a co-precipitation approach. The purpose of this research was to degrade hazardous methylene blue dye and assess antimicrobial potential of the prepared CS/PVP-doped Bi₂O₃ nanostructures. In addition, optical characteristics, charge recombination rate, elemental composition, phase formation, surface morphology, functional groups, d-spacing, and crystallinity of the obtained nanostructures were investigated. CS/PVP-doped Bi₂O₃ nanostructures exhibited efficient catalytic activity (measured as 99%) in a neutral medium for dopant-free nanostructures while the inhibition zone was measured using a Vernier caliper against pathogens Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) at low and high doses to check antimicrobial activity. Strong bactericidal action was recorded against S. aureus bacteria such that a significant inhibition zone was measured at 3.09 mm.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Novel Wastewater Treatment by Using Newly Prepared Green Seaweed-Zeolite Nanocomposite

A dependent step-by-step study that included experimental and field study was applied to explore the simplest and most effective system that could be applied for adsorption of Congo Red (CR) dye from the effluent of wastewater that comes out from different industries. Zeolite (Z) surface and pores were subjected to a modification process using green seaweed (GS) algae. Thereafter, each Z, GS, and composite from both were evaluated based on the adsorption efficacy to clean up CR dyes from aqueous solutions. A wet impregnation method was followed to fabricate the zeolite/algae (ZGS) nanocomposite which was characterized using the most appropriate characterization techniques. Batch experiments were selected to be the method of choice in order to follow up the performance of the adsorption process versus different practical variables. Moreover, dye adsorption kinetics and isotherms were investigated as well. At lowered concentrations of CR, the novel nanocomposite ZGS revealed more efficacy than its counterparts, Z and GS, in terms of the adsorption capacity. The maximum adsorption capacities were found to be 8.10, 10.30, and 19.70 mg/g for Z, GS, and ZGS, respectively. Laboratory tests confirmed that the novel nanocomposite ZGS could be introduced as a new and economical nanoadsorbent to capture and remove negatively charged dyes from wastewater effluents that come out from industries at lower concentrations of CR dye and analogous compounds. The dye adsorption on GS, Z, and ZGS coincide with the pseudo-first, Langmuir isotherm, and second-order models. Evaluation for the sorption mechanism was conducted using a diffusion model known as Weber's intraparticle. Depending on the last findings, field experiments on removing dyes from industrial wastewater revealed optimistic findings as the efficiency of our modern and eco-friendly nanoadsorbent reached 91.11%, which helps in the reuse of industrial wastewater.

Toward efficient dye degradation and the bactericidal behavior of Mo-doped La2O3 nanostructures

In this study, different concentrations (0, 0.02, 0.04, and 0.06 wt%) of Mo doped onto La2O3 nanostructures were synthesized using a one-pot co-precipitation process. The aim was to study the ability of Mo-doped La2O3 samples to degrade toxic methylene blue dye in different pH media. The bactericidal potential of synthesized samples was also investigated. The structural properties of prepared samples were examined by XRD. The observed XRD spectrum of La2O3 showed a cubic and hexagonal structure, while no change was recorded in Mo-doped La2O3 samples. Doping with Mo improved the crystallinity of the samples. UV-Vis spectrophotometry and density functional theory calculations were used to assess the optical characteristics of Mo-La2O3. The band gap energy was reduced while the absorption spectra showed prominent peaks due to Mo doping. The HR-TEM results revealed the rod-like morphology of La2O3. The rod-like network appeared to become dense upon doping. A significant degradation of MB was confirmed with Mo; furthermore, the bactericidal activities against S. aureus and E. coli were measured as 5.05 mm and 5.45 mm inhibition zones, respectively, after doping with a high concentration (6%) of Mo.

Flame synthesis of carbon nanoparticles from corn oil as a highly effective cationic dye adsorbent

Carbon nanoparticles (CNP) were synthesized through flame deposition method from a sustainable corn oil precursor. The morphology, particle size, surface chemistry, thermal stability, and zeta potential of the CNP were characterized. The batch adsorption of a cationic dye, methylene blue (MB), by the CNP at various concentrations, pH, and temperatures was evaluated to investigate the CNP's efficacy in industrial wastewater treatment applications. Results revealed the excellent adsorption of MB onto the CNP. The experimental data were then fitted into isotherm models, kinetic models, and thermodynamic models, and the model parameters, constants, Gibb free energy, enthalpy, and entropy were calculated and discussed. Hydrogen bonding and strong electrostatic interaction were the main adsorption mechanism for MB adsorption by the CNP. The CNP exhibited a maximum adsorption capacity of 138.89 mg/g, indicating superior adsorption of MB dye without the need for any further purification and activation steps. The adsorption efficiency did not compromise as the solution temperature increased up to 60 °C, and it can further be enhanced under alkaline conditions. To simulate the practical and industrial use of the developed CNP in textile effluent treatment, successful experiments were conducted in continuous flow adsorption by allowing concentrated MB solution to flow through a designed fixed bed purification system with a CNP filter bed.

Microcrystalline Cellulose from Groundnut Shell as Potential Adsorbent of Crystal Violet and Methylene Blue. Kinetics, Isotherms and Thermodynamic Studies

The isolation of microcrystalline cellulose from a groundnut shell is reported. Adsorption experiments were carried out for the removal of cationic crystal violet and methylene blue and it follows Langmuir model. Positive enthalpy and negative free energy changes have shown endothermic and favorable processes. The results reflect good adsorption process.

Pb doped ZnO nanoparticles for the sorption of Reactive Black 5 textile azo dye

In this study, Pb doped ZnO nanoparticles were synthesized by a sol-gel technique for the sorption of Reactive Black 5 (RB5) textile dye in aqueous solution. The ZnO:Pb (2 and 4%) nanoparticles have been characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and cryogenic nitrogen adsorption method. The average size of the synthesized nanoparticles was less than 100 nm and the surface areas were 18.8 and 20.8 m²/g, respectively for ZnO:Pb 2% and ZnO:Pb 4%. Batch sorption experiments were performed for color removal of RB5 dye at ambient temperature and 30 mg/L dye concentration. The central composite design with response surface methodology was used to study the effect of sorption condition (pH, nanoparticles dose and contact time). The significance of independent variables and their interactions was tested by analysis of variance. The optimum conditions of color removal were pH = 7, 2 g/L dose of nanoparticles and a contact time of 79 min. The color removal performance was 79.4 and 98.1% for ZnO:Pb 2 and 4% respectively. The pseudo-second-order model described well the removal rates while the Langmuir model fitted well the adsorption isotherms.

Synthesis and characterization of a novel chitosan-grafted-polyorthoethylaniline biocomposite and utilization for dye removal from water

Chitosan was grafted with polyorthoethylaniline through oxidative polymerization using ammonium persulfate as oxidant, resulting in the formation of a biocomposite of chitosan-grafted-polyorthoethylaniline (CH-g-POEA). The synthesized biocomposite (CH-g-POEA) was characterized by FTIR, SEM, and TGA. Adsorption of methyl orange (MO) dye by CH-g-POEA was studied, wherein the Langmuir isotherm model with a R2 of 0.9979 and adsorption capacity of 45.7 mg/g was evaluated.

Hierarchical approach towards adsorptive removal of Alizarin Red S dye using native chitosan and its successively modified versions

In the present work, native chitosan (Ch) along with its chemically and physico-chemically modified versions, namely sulphate cross-linked chitosan (SCC) and sulphate cross-linked chitosan-bentonite composite (SCC-B), were employed as potential adsorbents for the removal of an anionic dye, Alizarin Red S (ARS) from aqueous solutions. All three adsorbents were extensively characterized using techniques such as Fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray, X-ray diffraction, Brunauer-Emmett-Teller analysis, thermogravimetric-differential thermal analysis, and pH point of zero charge. Various parameters were optimized, including pH of dye solution, contact time, adsorbent dose, initial adsorbate concentration and temperature of adsorption. Four adsorption isotherm models were studied and it was found that the Freundlich model was best-fit for all three systems. Maximum adsorption capacities towards adsorption of ARS were found to be 42.48, 109.12 and 131.58 mg g^-1 for Ch, SCC and SCC-B, respectively. Kinetics of adsorption was examined by employing three well-known models in order to deduce the mechanism of adsorption. Thermodynamic studies show that the process is spontaneous and exothermic for all adsorbents employed. Furthermore, it was observed that for large sample volumes, the column adsorption method was more effective compared to the batch method.

Green Reduction of Graphene Oxide using Kaffir Lime Peel Extract (Citrus hystrix) and Its Application as Adsorbent for Methylene Blue

Green reduction of graphene oxide (GO) by phytochemicals was explored using the aqueous extract of kaffir lime peels. The research methods included preparation of extracts, preparation of GO, preparation and characterization of reduced-GO (RGO) using Fourier Transform Infrared (FTIR), X-ray diffraction (XRD), and UV-Vis spectroscopy, as well as methylene blue (MB) adsorption test using RGO. The RGO characterization showed that GO was successfully reduced by a C=C group restoration. The MB adsorption kinetics profile in RGO is more suitable for the pseudo-second-order model, whereas for the adsorption isotherm it is more suitable for the Langmuir model with a maximum adsorption capacity (q_max) of 276.06 mg/g at room temperature. The best ratio of GO: kaffir lime peel extract used to prepare RGO was at a ratio of 1: 2. Based on the ΔG, ΔH, and ΔS values, the adsorption of RGO-MB was defined as spontaneous and endothermic process. The results promise the potential application of RGO derived via green route to remove cationic dye in wastewater.

The addition of a quaternary group in biopolymeric material increases the adsorptive capacity of Acid Blue 25 textile dye

The quaternization of chitosan molecules creates materials with high adsorptive capacity towards textile dyes, which renders them capable of rapidly removing such dyes from a solution. In this study, a novel material was synthesized in bead form to adsorb the Acid Blue 25 textile dye. The adsorption isotherms, kinetics, and thermodynamics of this new material were investigated. The beads were further characterized by FT-IR and SEM studies, as well as their rheological behavior. Bioassays with Daphnia similis analyzed the toxicity of the dye before and after treatments. The Freundlich isotherm model fitted to all the adsorption data in a pH range from 2.50 to 8.50. Kinetic studies showed that adsorption was ruled by an intraparticle diffusion process and reached equilibrium in 270 min, as 39.527 μg mg^-1 of dye was sorbed to the beads. Thermodynamic studies showed that adsorption was a spontaneous and endothermic process. Thermodynamics also confirmed that the adsorption was proportionally influenced by higher temperatures. The FT-IR spectroscopy identified the adsorbate/adsorbent binding sites, thus confirming the occurrence of chemisorption. Post-treatment bioassays found a significant decrease in toxicity, obtaining just 10% of D. similis mortality after adsorption treatments. Therefore, the synthesized beads from this research can potentially be applied to the treatment of textile effluents.

A stable anionic metal–organic framework with open coordinated sites: selective separation toward cationic dyes and sensing properties

A multifunctional anionic metal–organic framework was successfully synthesized using a new pyridyl–tricarboxylate ligand. It could be applied as a luminescent sensor for Fe³⁺ ions and TNP and it showed selective adsorption of cationic dyes.

Optimization and modeling of methyl orange adsorption onto polyaniline nano-adsorbent through response surface methodology and differential evolution embedded neural network

Presence of pigments and dyes in water bodies are growing tremendously and pose as toxic materials and have severe health effects on human and aquatic creatures. Treatments methods for removal of these toxic dyes along with other pollutants are growing in different dimensions, among which adsorption was found a cheaper and efficient method. In this study, the performance of polyaniline-based nano-adsorbent for removal of methyl orange (MO) dye from wastewater in a batch adsorption process is studied. Along with this to minimize the number of experiments and obtain optimal conditions, a multivariate predictive model based on response surface methodology (RSM) is developed. This is compared with data-driven modeling using the artificial neural network (ANN) which is integrated with differential evolution optimization (DEO) for prediction of the adsorption of MO. The interactive effects on MO removal efficiency with respect to independent process variables were investigated. The fit of the predictive model was found to good enough with R² = 0.8635. The optimal ANN architecture with 5-12-1 topology resulted in higher R² and lower RMSE of 0.9475 and 0.1294 respectively. Pearson's Chi-square measure which provides a good measurement scale for weighing the goodness of fit is found to be 0.005 and 0.038 for RSM and ANN-DEO respectively, and other statistical metrics evaluated in this study further confirms that the ANN-DEO is very superior over RSM for model predictions.

Saccharomyces cerevisiae immobilized onto cross-linked chitosan beads: application of a novel material for the removal of dye toxicity

Waste from textile industries can severely harm the environment. Dyes are the main residues of these effluents. Saccharomyces cerevisiae is already known to be an efficient adsorbent for the removal of dyes. However, the lack of applicability and limitation of the use of cell biomass in an industrial treatment makes it impossible to apply them. Thus the aim of this work was to immobilize S. cerevisiae in cross-linked chitosan beads by two different techniques (contact immobilization and encapsulation in the polymer matrix), proposing two new materials for adsorption. Adsorption experiments were carried out to analyse the kinetics, isotherm and thermodynamics adsorptive of the synthesized materials. The adsorption data obtained were compared with the S. cerevisiae biomass and with the cell-free cross-linked chitosan beads to evaluate the efficiency of the two synthesized materials. The Fourier transform infrared spectrophotometer was used to characterize and analyse the main adsorption sites of the tested materials. Bioassays using the microcrustacean Daphnia similis verified if the materials could reduce the toxicity of the medium after its application in the treatment. Both materials synthesized in this work can potentially remove dyes from effluents, in addition to being able to significantly decrease dye toxicity from an aqueous medium.

Advanced Modified Polyacrylonitrile Membrane with Enhanced Adsorption Property for Heavy Metal Ions

Advanced modified polyacrylonitrile (PAN) membrane with high adsorption property for heavy metal ions was designed and fabricated for the first time. The introduced diazoresin-ethylenediaminetetraacetic acid (DR-EDTA) layer could effectively absorb the metal ion, such as Cu²⁺, Pb²⁺, Hg²⁺ in the waste water. The effects of layers, metal ion concentration, pH, temperature and cycle time were investigated. The results showed that the adsorption isotherms for Cu²⁺ were well fitted by Langmuir model. The maximum adsorption capacity of the modified membrane for Cu²⁺ was approximately 47.6 mg/g. In addition, the prepared PAN-(DR-EDTA)₃ membrane could be regenerated more than 720 h based on their adsorption/desorption cycles. The results demonstrated that the modified PAN membrane could be used as effective adsorbents for heavy metal removal from waste water.

Synthesis of polyaniline–magnetite nanocomposites using swollen liquid crystal templates for magnetically separable dye adsorbent applications

One dimensional iron oxide–polyaniline core–shell nanostructures enable faster adsorption of dyes and separation of the adsorbent using an external magnet.

Dimethyl diallyl ammonium chloride and diallylamin Co-polymer modified bio-film derived from palm dates for the adsorption of dyes

For the first time, co-polymer of dimethyl diallyl ammonium chloride and diallylamin (PDDACD) was used to modify the films derived from the waste of palm date fruits, which were then investigated by the purification of colored aqueous solutions. The physico-chemical characteristics were identified using data color, FT-IR spectroscopy, and SEM features. The modified films were evaluated as adsorbents of Methylene Blue (MB), Direct Yellow 50 (DY50), Reactive Blue 198 (RB198) and Naphtol Blue Black (NBB). High retention capacities were achieved in the following order: The equilibrium da DY50 (14 mg g⁻¹) < RB198 (16 mg g⁻¹) < NBB (63.9 mg g⁻¹) < MB (150 mg g⁻¹). The kinetic modeling of the data revealed that the adsorption data follows the pseudo second order model. It was fitted to the Langmuir, Freundlich, Temkin, and Dubinin-Redushkevich equations, and the data best fit the Freundlich model indicating that the adsorption might occur in the heterogeneous adsorption sites. These results reveal that PDDACD modified films are valuable materials for the treatment of industrial wastewater. Moreover, the as-prepared adsorbent is economically viable and easily controllable for pollutant adsorption.