Biomimetic Synthesis of Magnetic Composite Particles for Laccase Immobilization

Effective biodegradation of chlorophenols, sulfonamides, and their mixtures by bacterial laccase immobilized on chitin

Coexisting multi-pollutants like sulfonamides (SAs) and chlorophenols (CPs) in the ecological environment pose a potential risk to living organisms. The development of a strategy for the effective removal of multiple pollutants has become an urgent need. Herein, we systematically investigated the potential of immobilized bacterial laccase to remove chlorophenols (CPs), sulfonamides (SAs), and their mixtures. Laccase from Bacillus pumilus ZB1 was efficiently immobilized on chitin and its thermal stability, pH stability, and affinity to substrates were improved. Reusability assessment showed the immobilized laccase retained 75.5% of its initial activity after five cycles. The removal efficiency of CPs and SAs by immobilized laccase was significantly improved compared with that of free laccase. In particular, the removal of 2,4-dichlorophenol and 2,4,6-trichlorophenol reached 96.9% and 89.3% respectively within 8 h. The immobilized laccase could remove 63.70% of 2,4-dichlorophenol after four cycles. The degradation pathways of 2,4-dichlorophenol and sulfamethazine were proposed via LC/MS analysis. When the co-pollutants containing 2,4,6-trichlorophenol and sulfamethoxazole, immobilized laccase showed 100% removal of 2,4,6-trichlorophenol and 38.71% removal of sulfamethoxazole simultaneously. Cytotoxicity and phytotoxicity tests indicated that immobilized laccase can alleviate the toxicity of co-pollutants. The results demonstrate that chitin-based laccase immobilization can be an effective strategy for the removal of SAs, CPs, and their co-pollutants.

Construction of porous chitosan macrospheres via dual pore-forming strategy as host for alkaline protease immobilization with high activity and stability

Fabrication of highly-efficient enzymatic supports having excellent affinity to enzymes and superior mass transfer properties is highly desirable for enzymatic bio-catalysis. Herein, newly engineered chitosan macrospheres having interconnected and interlaced network pores are prepared via dual pore-forming strategy and applied as novel host for the effective immobilization of alkaline protease. The synergetic effect of SiO₂ templates and gas-induced pore-forming agents play an important role in inhibiting the over-crosslinking of chitosan chains and promoting the elevation of interior porosity. Benefited from the highly exposed surface and abundant available binding sites, the as-developed porous support P₂CSM achieves a maximum loading capacity of 43.8 ± 0.8 mg/g and ultra-high activity recovery of 92.4 % for alkaline protease. P₂CSM is competent to effectively stabilize the structural conformation of alkaline protease from inactivation through the flexible covalent interaction. Considering these attributes, Protease@P₂CSM demonstrates remarkably better structural stability, reusability and SDS-resistance than free alkaline protease, as well as excellent proteolytic ability, and the residual activity of Protease@P₂CSM is evaluated as high as 70.3 % after 7 consecutive reuses. This work provides a promising avenue to construct highly-active enzyme-composites for widespread utilization in various practical applications.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Degradation of 2,4-DCP by the immobilized laccase on the carrier of sodium alginate-sodium carboxymethyl cellulose

In this paper, sodium alginate-sodium carboxymethyl cellulose (SA-CMC) composite material was used as a carrier, and sodium alginate-embedded laccase (Lac@SC) was prepared by traditional embedding method. After that, ethylene glycol diglycidyl ether (EGDE) and glutaraldehyde (GLU) were used as cross-linking agents, two different cross-linking-embedded co-immobilized laccases (Lac@SCG and Lac@SCE) were innovatively prepared, respectively, and then these immobilized laccases were characterized by SEM, FT-IR and XRD, and the stability of the three immobilized laccases was explored. In addition, the effects of different factors on the removal of 2,4-DCP by immobilized laccase were studied, and the degradation kinetic models of three immobilized laccases on 2,4-DCP were summarized, the possible degradation pathways of pollutants were also given. Experimental results showed that compared to free laccase, the pH stability, thermal stability and storage stability of immobilized laccase were greatly improved. These immobilized laccases could maintain high activity at pH3~6, 45~55 °C. Lac@SCG had the best storage stability. After 30 days of storage, the relative enzyme activity was still more than 40%. Lac@SC had good reusability, the relative enzyme activity was still more than 50% after 5 uses. In the degradation of 2,4-DCP, all three immobilized laccases showed good performance, when Lac@SCE was at pH5, 35 °C, 25 h, the removal rate of 2,4-DCP could reach 95.2%; When at 45 °C, Lac@SC had the highest degradation rate which reach to 94%; At 45 °C, the degradation rate of Lac@SCG reached 83.2%.

A robust biocatalyst based on laccase immobilized superparamagnetic Fe3O4@SiO2-NH2 nanoparticles and its application for degradation of chlorophenols

The presence of chlorophenols in water and wastewater is considered a serious environmental issue. To eliminate these micropollutants, biodegradation of chlorophenols using enzyme-nanoparticle conjugated biocatalyst, is proposed as an economical and eco-friendly method. Herein, amino-functionalized superparamagnetic Fe₃O₄@SiO₂-NH₂ nanoparticles with core-shell structure were constructed as a promising carrier for immobilization of laccase from Trametes versicolor. Compared with free laccase, Fe₃O₄@SiO₂-NH₂-Laccase displayed remarkable outcomes in all major areas such as temperature and storage stabilities, and tolerance to organic solvents and metal ions. The biocatalytic performance and reusability of Fe₃O₄@SiO₂-NH₂-Laccase were evaluated for the degradation of 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP) in repeated cycles. Even after 10 successive reuses, the degradation rate of 2,4-DCP and 2,4,6-TCP were found to be 54.9% and 68.7%, respectively. The influences of solution pH, initial chlorophenol concentration, and temperature on the degradation rate of these two chlorophenols were evaluated. The degradation intermediate products including dimers, trimers, and tetramers of 2,4-DCP and 2,4,6-TCP were identified. Release of chloride ions was observed during the enzymatic degradation of these two chlorophenols. Based on the determination of intermediate products and released chloride ions, the degradation pathway that was involved in dehydrogenation, reactive radical intermediates formation, dechlorination, self-coupling and oligomers/polymers formation was proposed. The toxicity of these two chlorophenols and their intermediates was substantially reduced during the enzymatic degradation. The results of this study might present an alternative clean biotechnology for the remediation of 2,4-DCP and 2,4,6-TCP contaminated water matrices.

Preparation and Characterization of Chitosan-Coated Manganese-Ferrite Nanoparticles Conjugated with Laccase for Environmental Bioremediation

Bioremediation with immobilized enzymes has several advantages, such as the enhancement of selectivity, activity, and stability of biocatalysts, as well as enzyme reusability. Laccase has proven to be a good candidate for the removal of a wide range of contaminants. In this study, naked or modified MnFe₂O₄ magnetic nanoparticles (MNPs) were used as supports for the immobilization of laccase from Trametes versicolor. To increase enzyme loading and stability, MNPs were coated with chitosan both after the MNP synthesis (MNPs-CS) and during their formation (MNPs-CS_{in situ}). SEM analysis showed different sizes for the two coated systems, 20 nm and 10 nm for MNPs-CS and MNPs-CS_{in situ}, respectively. After covalent immobilization of laccase by glutaraldehyde, the MNPs-CS_{in situ}-lac and MNPs-CS-lac systems showed a good resistance to temperature denaturation and storage stability. The most promising system for use in repeated batches was MNPs-CS_{in situ}-lac, which degraded about 80% of diclofenac compared to 70% of the free enzyme. The obtained results demonstrated that the MnFe₂O₄-CS_{in situ} system could be an excellent candidate for the removal of contaminants.

Laccase immobilized peroxidase mimicking magnetic metal organic frameworks for industrial dye degradation

In the present work, laccase was successfully immobilized in peroxidase mimicking magnetic metal organic frameworks (MMOFs) within 30 min using a facile approach. The integration of magnetic nanoparticles during synthesis significantly eases the separation of prepared biocatalyst using an external magnet. The immobilization of laccase was confirmed using different characterization techniques. The laccase@MMOFs found spherical in nature with an average particle size below 100 nm. The synthesized laccase embedded framework exhibits supermagnetic property with the saturation magnetization (Ms) of 34.12 emu/gm. The prepared bio-metallic frameworks maintain high surface area and thermal stability. The laccase@MMOFs was successfully exploited for the degradation of industrial dyes in batch and continuous mode with an average degradation efficiency of 95%. The prepared laccase structure had an excellent recyclability retaining upto 89% residual activity upto 10^th cycle and can be stored at room temperature upto 30 days without any significant loss of activity.

Novel Synthesis Strategy for Biocatalyst: Fast Purification and Immobilization of His- and ELP-Tagged Enzyme from Fermentation Broth

Inspired by natural biomineralization process, inorganic phosphates system has been selected as a candidate for the encapsulation of enzyme; however, during the long-term fabrication process, the loss of enzyme activity is unavoidable, and the biomimetic mineralization mechanism is still poorly understood. Meanwhile, the purification process plays a key role in the preparation of immobilized enzyme with high enzyme loading and activity, while the rapid, low-cost, and eco-friendly purification of biocatalyst from crude fermentation broth remains a critical challenge in biochemical engineering. Here, a binary tag composed of elastin-like polypeptide (ELP) and His-tag was presented for the first time to be fused with β-glucosidase (Glu) to construct a recombinant Glu-linker-ELP-His (GLEH) with the aim of developing a fast synthesis strategy combining purification and immobilization processes for a biocatalyst with better stability and recyclability. The purification fold and activity recovery of GLEH reached 18.1 and 95.2%, respectively, once a single inverse transition cycling was conducted at 25 °C for 10 min. Then, efficient biomineralization of hybrid enzyme-Cu₃(PO₄)₂ nanoflowers was realized in 15 min by the action of His-tag and ultrasonic-assisted reaction method. The activity recovery and relative activity reached the maximum at 90.3 and 111.0%, respectively. We demonstrate that the crystal growth process of a hybrid nanoflower involves obvious nucleation, self-assembly, and the Ostwald ripening process, and the enzyme GLEH acts as a "binder" to assemble Cu₃(PO₄)₂ nanoflakes. The immobilized GLEH nanoflowers show outstanding operation stability and recyclability, and their catalytic efficiency is close to that of free Glu.

Eco-Friendly Composite of Fe3O4-Reduced Graphene Oxide Particles for Efficient Enzyme Immobilization

A novel type of spherical and porous composites were synthesized to dually benefit from reduced graphene oxide (rGO) and magnetic materials as supports for enzyme immobilization. Three magnetic composite particles of Fe₃O₄ and rGO containing 71% (rGO-Fe₃O₄-M1), 36% (rGO-Fe₃O₄-M2), and 18% (rGO-Fe₃O₄-M3) Fe were prepared using a one-pot spray pyrolysis method and were used for the immobilization of the model enzymes, laccase and horseradish peroxidase (HRP). The rGO-Fe₃O₄ composite particles prepared by spray pyrolysis process had a regular shape, finite size, and uniform composition. The immobilization of laccase and HRP on rGO-Fe₃O₄-M1 resulted in 112 and 89.8% immobilization efficiency higher than that of synthesized pure Fe₃O₄ and rGO particles, respectively. The stability of laccase was improved by approximately 15-fold at 25 °C. Furthermore, rGO-Fe₃O₄-M1-immobilized laccase exhibited 92.6% of residual activity after 10 cycles of reuse and was 192% more efficient in oxidizing different phenolic compounds than the free enzyme. Therefore, these unique composite particles containing rGO and Fe₃O₄ may be promising supports for the efficient immobilization of industrially important enzymes with lower acute toxicity toward Vibrio fischeri than commercial pure Fe₃O₄ particles.

Magnetic Ganoderma lucidum spore microspheres: A novel material to immobilize CotA multicopper oxidase for dye decolorization

In this study, hollow microspheres were obtained from Ganoderma lucidum spores. Then the hollow microspheres were loaded with Fe3O4 nanoparticles to prepare novel magnetic spore microspheres. TEM images and X-ray diffractometry demonstrated that the Fe3O4 nanoparticles were incorporated throughout the spore microsphere. CotA multicopper oxidase was chosen as biomacromolecule to study the loading ability of the magnetic spore microspheres. The combination of the CotA enzyme with the microsphere was observed by laser scanning confocal microscope. The loaded amount of CotA on the microspheres was 75mg/g when the CotA concentration was 1.2mg/mL and the activity recovery of the immobilized CotA was 81%. The magnetic microspheres loaded with CotA, which can be easily and quickly recovered by an external magnetic field, were used for dye decolorization. After 1h decolorization, 99% of the indigo carmine has been removed by 10mg microspheres. In addition, the immobilized CotA retained 75% of activity after 10 consecutive cycles, which indicated that the magnetic spore microspheres are good support material for immobilization of the enzyme.

Large-scale aerosol-assisted synthesis of biofriendly Fe₂O₃ yolk-shell particles: a promising support for enzyme immobilization

Multiple-shelled Fe2O3 yolk-shell particles were synthesized using the spray drying method and intended as a suitable support for the immobilization of commercial enzymes such as glucose oxidase (GOx), horseradish peroxidase (HRP), and laccase as model enzymes. Yolk-shell particles have an average diameter of 1-3 μm with pore diameters in the range of 16 to 28 nm. The maximum immobilization of GOx, HRP, and laccase resulted in the enzyme loading of 292, 307 and 398 mg per g of support, respectively. After cross-linking of immobilized laccase by glutaraldehyde, immobilization efficiency was improved from 83.5% to 90.2%. K(m) and V(max) values were 41.5 μM and 1722 μmol min(-1) per mg protein for cross-linked laccase and those for free laccase were 29.3 μM and 1890 μmol min(-1) per mg protein, respectively. The thermal stability of the enzyme was enhanced up to 18-fold upon cross-linking, and the enzyme retained 93.1% of residual activity after ten cycles of reuse. The immobilized enzyme has shown up to 32-fold higher stability than the free enzyme towards different solvents and it showed higher efficiency than free laccase in the decolorization of dyes and degradation of bisphenol A. The synthesized yolk-shell particles have 3-fold higher enzyme loading efficiency and lower acute toxicity than the commercial Fe2O3 spherical particles. Therefore, the use of unique yolk-shell structure Fe2O3 particles with multiple-shells will be promising for the immobilization of various enzymes in biotechnological applications with improved electrochemical properties. To the best of our knowledge, this is the first report on the use of one pot synthesized Fe2O3 yolk-shell structure particles for the immobilization of enzymes.

Preparation and characterization of laccases immobilized on magnetic nanoparticles and their application as a recyclable nanobiocatalyst for the aerobic oxidation of alcohols in the presence of TEMPO

MNPs-Laccase as a novel magnetically recyclable nanobiocatalyst has been used for the selective aerobic oxidation of alcohols.

Reversible immobilization of laccase onto metal-ion-chelated magnetic microspheres for bisphenol A removal

Increasing attention has been given to nanobiocatalysis for commercial applications. In this study, laccase was reversibly immobilized onto Cu(ΙΙ)- and Mn(ΙΙ)-chelated magnetic microspheres and successfully applied to remove bisphenol A (BPA) from water. The results indicated that the loading of laccase onto the metal-ion-chelated magnetic microspheres was approximately 100mg/g. After five successive adsorption-desorption cycles, the laccase adsorption capacities did not change. In comparison with free laccase, the thermal and storage stabilities of immobilized laccase were significantly improved. Immobilized laccase exhibited a high removal efficiency for BPA under the combined actions of biodegradation and adsorption. Greater than 85% of BPA was removed under optimum conditions. The effects of various factors on the BPA removal efficiency of immobilized laccase were analysed. The results showed that metal-ion-chelated magnetic microspheres have great potential for industrial applications.

Correlation between mesopore volume of carbon supports and the immobilization of laccase from Trametes versicolor for the decolorization of Acid Orange 7

Immobilization of laccase from Trametes versicolor was carried out using carbon supports prepared from different lignocellulosic wastes. Enzymes were immobilized by physical adsorption. Taguchi methodology was selected for the design of experiments regarding the preparation of the carbon materials, which included the use of activating agents for the promotion of mesoporosity. A good correlation between the mesopore volumes of the carbon supports and the corresponding laccase loadings attained was observed. Specifically, the chemical activation of pecan nut shell with FeCl3 led to a highly mesoporous material that also behaved as the most efficient support for the immobilization of laccase. This particular laccase/carbon support system was used as biocatalyst for the decolorization of aqueous solutions containing Acid Orange 7. Mass spectrometry coupled to a liquid chromatograph allowed us to identify the products of the dye degradation.

Removal of sulfonamide antibiotics by oriented immobilized laccase on Fe3O4 nanoparticles with natural mediators

A novel strategy was applied in the oriented immobilization of laccase from Echinodontium taxodii on concanavalin A-activated Fe3O4 nanoparticles (GAMNs-Con A) based on laccase surface analysis. These nanoparticles showed higher enzyme loading and activity recovery compared with conventional covalent binding. Along with the improvement in thermal and operational stabilities, the oriented immobilized laccase (GAMNs-Con A-L) exhibited higher substrate affinity than free laccase. Free laccase and GAMNs-Con A-L were then applied in the removal of sulfonamide antibiotics (SAs). Although both free and immobilized laccase resulted in the rapid removal of SAs, GAMNs-Con A-L showed a higher removal rate of SAs compared with the free counterpart in the presence of S-type compounds present in lignin structure. Syringic acid mediated the fastest removal efficiency of SAs among S-type compounds and resulted in an almost complete removal of these substances after incubation for 5min. The oxidation products of SAs were identified via LC-ESI(+)-MS. The results suggested the transformation of SAs and S-type compounds were catalyzed by laccase, resulting in the formation of cross-coupled products.

Mesosilica-coated ultrafine fibers for highly efficient laccase encapsulation

In this paper, we present a simple but efficient biomimetic method to encapsulate laccase on mesoporous silica-modified electrospun (ES) ultrafine fibers. Because of the mild immobilization conditions (room temperature, aqueous condition), the encapsulated laccase retained a high activity of 94%. Because of the protection from the silica layer, the laccase worked efficiently at 60 °C and retained a long-term activity in the presence of proteinase K. After recycling for 10 times the laccase still preserved 96% of its original reactivity. More remarkably, the immobilized laccase on fibers could completely recover its activity after thermal denature, while the free laccase permanently lost the activity. We also demonstrated that the laccase on silica-coated fibers exhibited an enhanced decolorization capability of Brilliant Blue KN-R (BBKN-R) as compared to the free laccase, showing its great potential for industrial applications.