Fast Degradation and Biodegradability Improvement of Reactive Brilliant Red X-3B by the Cobalt(II)/Bicarbonate/Hydrogen Peroxide System

Treatment of textile wastewater using the Co(II)/NaHCO3/H2O2 oxidation system

Textile wastewater (TWW) is one of the most hazardous wastewaters for ecosystems when it is discharged directly into water streams without adequate treatment. Some organic pollutants, such as dyes in TWW, are considered refractory compounds that are difficult to degrade using conventional chemical and biological methods. The bicarbonate-activated peroxide (BAP) system is an advanced oxidation process (AOP) based on applying H2O2, which has been demonstrated to be a clean and efficient technology for dye degradation, with the advantage of operating under slightly alkaline pH conditions. In this study, response surface methodology (RSM) based on a central composite design (CCD) was used to optimize the degradation of TWW contaminated with the azo dye Acid Black 194 using the BAP system catalyzed with cobalt ions in solution (Co2+). The analysis of variance (ANOVA) technique was applied to identify significant variables and their individual and interactive effects on the degradation of TWW. The optimum reagent concentrations for degrading TWW at 25 °C and with 45 μM Co2+ were 787.61 and 183.34 mM for H2O2 and NaHCO3, respectively. Under these conditions, complete decolorization (≥99.40), 32.20 % mineralization, and 52.02 % chemical oxygen demand removal were achieved. Additionally, the acute toxicity of textile wastewater before and after oxidation was evaluated with guppy fish (Poecilia reticulata), showing a total reduction in mortality after treatment with the Co2+-BAP system. The Co2+-BAP oxidation system is a potential method for textile wastewater treatment, which, in addition to achieving complete decolorization and partial mineralization, improves biodegradability and reduces the toxicity of the treated water.

Bicarbonate-Hydrogen Peroxide System for Treating Dyeing Wastewater: Degradation of Organic Pollutants and Color Removal

The textile industry is a global economic driving force; however, it is also one of the most polluting industries, with highly toxic effluents which are complex to treat due to the recalcitrant nature of some compounds present in these effluents. This research focuses on the removal of Chemical Oxygen Demand (COD), color, Total Organic Carbon (TOC), and Ammoniacal Nitrogen (N-NH3) on tannery wastewater treatment through an advanced oxidation process (AOPs) using sodium bicarbonate (NaHCO3), hydrogen peroxide (H2O2) and temperature using a central composite non-factorial design with a surface response using Statistica 7.0 software. All experiments used a 500 mL reactor with 300 mL of tannery wastewater from a company in Cúcuta, Colombia. The physicochemical characterization was done to determine the significant absorbance peaks about the color in the wavelengths between 297 and 669 nm. Statistical analysis found that the concentration of NaHCO3 affects the removal of color and N-NH3; however, it did not affect COD and TOC. The optimal process conditions for removing the different compounds under study were: NaHCO3 1 M, H2O2 2 M, and 60 °C, with efficiencies of 92.35%, 31.93%, 68.85%, and 35.5% N-NH3, COD, color, and TOC respectively. It can be concluded that AOPs using H2O2 and NaHCO3 are recommended to remove color and N-NH3.

Synthesis of MFeO3/SBA-15 (M = La or Bi) for peroxymonosulfate activation towards enhanced photocatalytic activity

MFeO3/SBA-15 was synthesized by a simple sol–gel method and was used to activate peroxymonosulfate for the degradation of doxycycline hydrochloride.

Application of percarbonate and peroxymonocarbonate in decontamination technologies

Sodium percarbonate (SPC) and peroxymonocarbonate (PMC) have been widely used in modified Fenton reactions because of their multiple superior features, such as a wide pH range and environmental friendliness. This broad review is intended to provide the fundamental information, status and progress of SPC and PMC based decontamination technologies according to the peer-reviewed papers in the last two decades. Both SPC and PMC can directly decompose various pollutants. The degradation efficiency will be enhanced and the target contaminants will be expanded after the activation of SPC and PMC. The most commonly used catalysts for SPC activation are iron compounds while cobalt compositions are applied to activate PMC in homogenous and heterogeneous catalytical systems. The generation and participation of hydroxyl, superoxide and/or carbonate radicals are involved in the activated SPC and PMC system. The reductive radicals, such as carbon dioxide and hydroxyethyl radicals, can be generated when formic acid or methanol is added in the Fe(II)/SPC system, which can reduce target contaminants. SPC can also be activated by energy, tetraacetylethylenediamine, ozone and buffered alkaline to generate different reactive radicals for pollutant decomposition. The SPC and activated SPC have been assessed for application in-situ chemical oxidation and sludge dewatering treatment. The challenges and prospects of SPC and PMC based decontamination technologies are also addressed in the last section.

Performance indicators for a holistic evaluation of catalyst-based degradation-A case study of selected pharmaceuticals and personal care products (PPCPs)

Considerable efforts have been made to develop effective and sustainable catalysts, e.g., carbon-/biochar-based catalyst, for the decontamination of organic pollutants in water/wastewater. Most of the published studies evaluated the catalytic performance mainly upon degradation efficiency of parent compounds; however, comprehensive and field-relevant performance assessment is still in need. This review critically analysed the performance indicators for carbon-/biochar-based catalytic degradation from the perspectives of: (1) degradation of parent compounds, i.e., concentrations, kinetics, reactive oxidative species (ROS) analysis, and residual oxidant concentration; (2) formation of intermediates and by-products, i.e., intermediates analysis, evolution of inorganic ions, and total organic carbon (TOC); and (3) impact assessment of treated samples, i.e., toxicity evolution, disinfection effect, and biodegradability test. Five most frequently detected pharmaceuticals and personal care products (PPCPs) (sulfamethoxazole, carbamazepine, ibuprofen, diclofenac, and acetaminophen) were selected as a case study to articulate the performance indicators for a holistic evaluation of carbon-/biochar-based catalytic degradation. This review also encourages the development of alternative performance indicators to facilitate the rational design of catalysts in future studies.

Oxygen doped graphitic carbon nitride nanosheets for the degradation of organic pollutants by activating hydrogen peroxide in the presence of bicarbonate in the dark

The development of novel wastewater treatment processes that use heterogeneous catalysts to activate hydrogen peroxide (H2O2) with bicarbonate (HCO3 -) has been a subject of great interest in recent years; however, significant challenges remain, despite research into numerous metal-based catalysts. The work presented herein employed oxygen-doped graphitic carbon nitride (O/g-C3N4) as a non-metal catalyst for activating H2O2 in the presence of HCO3 -, and this method represented the first system capable of removing organic pollutants in the dark, to our knowledge. The catalysts were characterized using several microscopic imaging, spectroscopic, electrochemical, and crystallographic techniques, as well as N2-physorption procedures. Analysis of the results revealed that the O/g-C3N4 catalyst possessed a high specific surface area and many defect sites. Various operational parameters, including the relative amounts of HCO3 -, H2O2, and O/g-C3N4, were systemically investigated. A clear performance enhancement was observed in the degradation of organic contaminants when subjected to the HCO3 --H2O2-O/g-C3N4 system, and this result was ascribed to the synchronous adsorption and chemical oxidation processes. The novel system presented herein represented a new water treatment technology that was effective for removing organic contaminants.

Experimental data of a catalytic decolorization of Ponceau 4R dye using the cobalt (II)/NaHCO3/H2O2 system in aqueous solution

The treatment by Advanced Oxidation Processes (AOPs) of wastewater polluted with dyes is of particular interest in the field of environmental engineering, especially for the removal azo-dyes, representing over 50% of the global annual production of dyes. Unfortunately, most azo-dyes are non-biodegradable and can be toxic to aquatic organisms. This is the first data article that applies the methodology of response surface for the optimization of decolorization of an azo-compound using cobalt in a homogeneous medium as the catalyst of a bicarbonate activated hydrogen peroxide (BAP) system which, in turn, is an emerging technology for wastewater treatment. The Response Surface Methodology (RSM) based on a Central Composite Design (CCD) was used to evaluate and optimize the influence of three experimental variables (stoichiometric dosage of H₂O₂, molar ratio H₂O₂/NaHCO₃ and cobalt concentration) on the decolorization of Ponceau 4R. Reactions were performed at 25 °C, pH 8.3 with a reaction time of 2 h. Analysis of variance (ANOVA) showed values of R² and adjusted-R² of 0.9815 and 0.9648, and experimental data were fit to a second-order regression model. The optimal conditions to achieve a maximum decolorization (96.31%) of a Ponceau 4R aqueous solution of 20 mg/l were: 4.73 times stoichiometric dosage of H₂O₂, molar ratio H₂O₂/NaHCO₃ of 1.70 and cobalt concentration of 11.16 µM. Under the optimal reaction conditions, the influence of temperature (20, 25, 30 and 35 °C) on decolorization was evaluated and data were adjusted to second order kinetics. To verify the efficiency of the BAP system on the decolorization of Ponceau 4R, under the optimal conditions of reaction, UV–Vis spectra, at different reaction times, were measured. Additionally, blank experiments in order to evaluate the effect of individual factors in the Ponceau 4R decolorization, using BAP system, were carried out. Data showed that the Co(II)-NaHCO₃-H₂O₂ system is a suitable technology for the decolorization of azo-dyes aqueous solutions.

Tris-Co(II)-H2O2 System-Mediated Durative Hydroxyl Radical Generation for Efficient Anionic Azo Dye Degradation by Integrating Electrostatic Attraction

The development of simple Fenton/Fenton-like systems with durative hydroxyl radical (^•OH) generation characteristics is significant to rapid organic pollutant degradation and cost-effective water treatment. In this study, a tris(hydroxymethyl)aminomethane (Tris)-incorporated Co(II)-H₂O₂ Fenton-like system has been successfully constructed for efficient Sunset Yellow (SY, a typical anionic azo dye) degradation under alkaline conditions. The mechanism of the enhanced degradation consists of two parts: first, the Tris-Co(II) complex triggers the durative generation of highly oxidized hydroxyl radicals; second, electrostatic attraction between SY and the Tris-Co(II) complex shortens the radical-SY interaction time and facilitates the degradation of SY. With the introduction of Tris to this proposed system, the decolorization rate of SY can be increased from 37.0 to 98.0% after 50 min and efficient SY degradation with a high total organic carbon removal efficiency (>59.0%) is achieved under a wide initial pH from 8.7 to 12.0. Moreover, the universality of the designed system for anionic azo dye degradation is verified with reactive red and congo red.

Effective degradation of Orange G and Rhodamine B by alkali-activated hydrogen peroxide: roles of HO2- and O2·

Advanced oxidation processes offer effective solutions in treating wastewater from various industries. The process of alkali-activated hydrogen peroxide (H₂O₂) was superior for the treatment of alkaline dye wastewater because no additional reagents were required except H₂O₂. However, an important and interesting phenomenon had been observed that the primary reactive species were found different for degrading organic pollutants with the process of alkali-activated H₂O₂. Azo dye of Orange G (OG) and triphenylmethane dye of Rhodamine B (RhB) were chosen as the target organic pollutants. The influences of various parameters on OG and RhB degradation by alkali-activated H₂O₂ were evaluated. Furthermore, different scavengers, including ascorbic acid, methanol, t-butanol, isopropyl alcohol, furfuryl alcohol, and nitro blue tetrazolium, have been tested to identify the active species involved in dye degradation, and it was found that O₂^·- was mainly responsible for degrading OG, while HO₂^- anion was the primary oxidant for degrading RhB.

Efficient decolorization of typical azo dyes using low-frequency ultrasound in presence of carbonate and hydrogen peroxide

The aims of this study as to evaluate and understand the decolorization of azo dyes using carbonate and hydrogen peroxide under low-frequency ultrasonic irradiation. Under optimal conditions, the decolorization ratio of acid orange 8 (AO 8), a typical azo dye, was > 90% after 2 h of irradiation. The decolorization rate of AO 8 was 0.023 min^-1 under ultrasonic irradiation, which was about two times that without ultrasound. Different from the results of other published studies, OH played a minor role, while CO₃^- played the most important role in AO 8 ultrasonic decolorization in the presence of CO₃^2- and H₂O₂, with a contribution of 56.52%, followed by CO₄^2- (32.61%) and ¹O₂ (10.87%). Another difference is that CO₃^- formed through the cleavage of peroxymonocarbonate or peroxydicarbonate under ultrasonic irradiation rather than through reaction between hydroxyl radical and carbonate. Investigations for different azo dyes revealed that the decolorization rate decreased in the order AO 8 ≈ orange II > acid red 9 > acid yellow 11, probably because of molecular differences among the azo dyes.

Carbonate and carbonate anion radicals in aqueous solutions exist as CO3(H2O)62− and CO3(H2O)6˙− respectively: the crucial role of the inner hydration sphere of anions in explaining their properties

An effort to reproduce the physical properties of CO₃²⁻ and CO₃˙⁻ in water proves that one has to include an inner hydration sphere of six water molecules for both anions.

Dioxygen-mediated oxidation of hydroquinone with cobalt ions in a bicarbonate aqueous solution for the production of active radicals

Cobalt(ii) ions exhibit high efficiency for hydroquinone oxidation in HCO₃⁻ solution with O₂ to produce hydroxyl radicals.

Controlled leaching with prolonged activity for Co-LDH supported catalyst during treatment of organic dyes using bicarbonate activation of hydrogen peroxide

The effluents from industries are commonly non-biodegradable and produce various hazardous intermediate products by chemical reactions that have direct impact on environment. In the present investigation, a series of Co-Mg/AL ternary LDH catalysts with fixed Mg/Al ratio were prepared by co-precipitation method. The effect of Co on the activity of the catalyst was monitored on the degradation of methylene blue (MB) as model compound at batch level using bicarbonate activation of H2O2 (BAP) system. On bench level, the best CoMgAl-4 catalyst can completely decolorize both methylene blue (MB) and methylene orange (MO) in short time, while in fixed bed, the catalyst was found stable for over 300 h with nearly 100% decolorization and excellent chemical oxygen demand (COD) removal. No leaching of Co was detected for the entire fixed experiment which may be accounted for long life stability and good activity of the catalyst. The ternary LDH catalysts were characterized by AES, XRD, FTIR, BET, and SEM for its compositional, phase structure, optical properties, textural, and surface morphology respectively. The XRD analysis confirmed characteristic pattern of hydrotalcite like structures without impurity phases. The formation of superoxide and hydroxyl radical as ROS was proposed with CoMgAl-4 by radical's scavengers.

Catalytic degradation of Acid Orange 7 with hydrogen peroxide using CoxOy-N/GAC catalysts in a bicarbonate aqueous solution

The cobalt-based catalysts CoxOy-N/GAC were prepared by pyrolysis of a cobalt–phenanthroline complex on granular active carbon in nitrogen atmosphere, and tested for the degradation of Acid Orange 7 with H₂O₂ in a bicarbonate aqueous solution.

The role of carbonate as a catalyst of Fenton-like reactions in AOP processes: CO3˙− as the active intermediate

The reaction Co(H₂O)₆²⁺ + H₂O₂ proceeds via a transient that decomposes into Co^II(H₂O)(OOH)(OH)₂ + CO₃˙⁻. Plausible biological implications are pointed out.