Rapid Decolorization of Phenolic Azo Dyes by Immobilized Laccase with Fe3O4/SiO2 Nanoparticles as Support

Laccase catalytic activity shielded by SiO2 nanostructured materials: an in vitro and in silico approach

This study investigates the enhancement of enzymatic catalytic performance by immobilizing laccase on various nanostructured mesoporous silica materials (SBA-15, MCF, and MSU-F). The activity of immobilized laccase was evaluated under different hydrothermal, pH, and solvent conditions, with laccase@MSU-F showing a three-fold increase in stability. Laccase immobilized on these materials demonstrated stability in a pH range of 4.5 to 10.0, while free laccase was inactivated at pH higher than 7. Molecular dynamics simulations revealed that electrostatic interactions and protective confinement effects contribute to the improved stability of immobilized laccase. Overall, the findings suggest that nanomaterials can enhance the operational stability and recovery of enzymes.Communicated by Ramaswamy H. Sarma.

Applications and immobilization strategies of the copper-centred laccase enzyme; a review

Laccase is a multi-copper enzyme widely expressed in fungi, higher plants, and bacteria which facilitates the direct reduction of molecular oxygen to water (without hydrogen peroxide production) accompanied by the oxidation of an electron donor. Laccase has attracted attention in biotechnological applications due to its non-specificity and use of molecular oxygen as secondary substrate. This review discusses different applications of laccase in various sectors of food, paper and pulp, waste water treatment, pharmaceuticals, sensors, and fuel cells. Despite the many advantages of laccase, challenges such as high cost due to its non-reusability, instability in harsh environmental conditions, and proteolysis are often encountered in its application. One of the approaches used to minimize these challenges is immobilization. The various methods used to immobilize laccase and the different supports used are further extensively discussed in this review.

Preparation of Fe3O4@Fe(0) immobilized enzyme to enhance the efficient degradation of methoxychlor

The presence of methoxychlor (MXC) in soil and wastewater is considered a nonnegligible environmental threat. Herein, Fe₃O₄@Fe(0) was obtained by NaBH₄ reduction of Fe₃O₄ nanoparticles and served as a carrier for laccase to construct catalyst. The catalyst was evaluated for the degradation of MXC in treated wastewater and soil with 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) being used as cocatalyst. The removal rate of MXC in wastewater and soil was found to be 89% and 88% in optimum conditions, and the influences of initial MXC concentration, pH, and temperature on the degradation rate were evaluated. The metabolites including 2-methylpentane, 3-methylpentane, and n-pentane of MXC were identified, and possible degradation mechanisms were proposed. Overall, this work successfully demonstrates not only the ability to degrade MXC in different circumstances but also provides a new idea for environmental remediation in the future.

A sustainable remediation of Congo red dye using magnetic carbon nanodots and B. pseudomycoides MH229766 composite: mechanistic insight and column modelling studies

In the present investigation, a biocomposite, magnetic carbon nanodot immobilized Bacillus pseudomycoides MH229766 (MCdsIB) was developed and consequently characterized using SEM-EDX, FTIR, XRD, and VSM analyses to effectively biotreat hazardous Congo red (CR) dye present in water bodies. The adsorptive efficiency of MCdsIB for the detoxification of CR from wastewater was investigated both in batch and column schemes. Optimum batch parameters were found as pH 3, 50 mg L-1 dye concentration, 150 min equilibrium time, and 2 g L-1 MCdsIB dosage. The Freundlich isotherm model best fit the experimental data, and the maximum adsorption capacity of MCdsIB was observed as 149.25 mg g-1. Kinetic data were in accordance with the pseudo-second-order model where the adsorption rate reduced with the rise in the initial concentration of dye. Intra-particle diffusion was discovered as the rate-limiting step following 120 min of the adsorption process. Furthermore, despite being used continually for five consecutive cycles, MCdsIB demonstrated excellent adsorption capacity (> 85 mg g-1), making it an outstanding recyclable material. The CR dye was efficiently removed in fixed-bed continuous column studies at high influent CR dye concentration, low flow rate, and high adsorbent bed height, wherein the Thomas model exhibited an excellent fit with the findings acquired in column experiments. To summarize, the current study revealed the effectiveness of MCdsIB as a propitious adsorbent for CR dye ouster from wastewater.

Non-magnetic and magnetically responsive support materials immobilized peroxidases for biocatalytic degradation of emerging dye pollutants-A review

In recent years, the removal of hazardous pollutants from many industries has become a significant challenge for mankind as a growing number of contaminants, including a wide range of organic pollutants, synthetic dyes, and polycyclic aromatic hydrocarbons (PAHs), have inevitably led to an increased anthropogenic impact on the biosphere. Due to the complex aromatic structure, most synthetic dyes show resistance to degrade by the classical approaches, such as coagulation, flotation, adsorption, membrane process, and reverse osmosis. Enzyme-assisted biodegradation of pollutants offers an eco-friendlier and cost-effective alternative to remediate dyes, dyes-based effluents, other toxins, etc. Various plant and microbial oxidoreductase (Horseradish and manganese peroxidase) have recently received more attention for degrading and detoxifying a wide range of dyes either by opening the aromatic ring structure or by precipitation due to their high activity under milder conditions, high substrate specificity, and biodegradable nature. To enhance the efficiency, stability and recyclability, enzymes were immobilized on various support media such as sodium alginate, agarose, chitin/chitosan, polyvinyl alcohol, polyacrylamide, macroporous exchange resins, hydrophobic sol-gels, and nanoporous silica gel, including magnetically separatable media. Among various types of magnetic nanoparticles (MNPs), iron oxide magnetic nanoparticles, such as hematite, magnetite, and maghemite, have gained great attention due to their properties like small size, superparamagnetism, high surface area to volume ratio, and ease of separation for repeated cycles of uses. These carriers can be separated easily and rapidly from the reaction medium by an external magnetic field without being subjected to mechanical stress than centrifugation or filtration. Various methods have been employed for immobilizing oxidoreductase on different media, such as adsorption, covalent binding, entrapment, and encapsulation using different cross-linking agents. Compared to the free enzyme, insolubilized enzymes reduce production costs by enzyme reusability, tolerance to unfavorable environmental conditions, and high catalytic stability. Here, we review various immobilization methods and biocatalytic degradation of emerging dye pollutants, focusing on various non-magnetically and magnetically responsive supports to immobilize peroxidases. Conclusively, magnetically separatable peroxidases show more stability towards extreme temperature and pH conditions and can be used for repeated cycles than free and non-magnetically separatable peroxidase.

Catalytic roles, immobilization and management of recalcitrant environmental pollutants by laccases: Significance in sustainable green chemistry

We are facing a high risk of exposure to emerging contaminants and increasing environmental pollution with the concomitant growth of industries. Persistence of these pollutants is a major concern to the ecosystem. Laccases, also known as "green catalysts" are multi-copper oxidases which offers an eco-friendly solution for the degradation of these hazardous pollutants to less or non-toxic compounds. Although various other biological methods exist for the treatment of pollutants, the fact that laccases catalyze the oxidation of broad range of substrates in the presence of molecular oxygen without any additional cofactor and releases water as the by-product makes them exceptional. They have a good possibility of utilization in various industries, especially for the purpose of bioremediation. Besides this, they have also been used in medical/health care, food industry, bio-bleaching, wine stabilization, organic synthesis and biosensors. This review covers the catalytic behaviour of laccases, their immobilization strategies, potential applications in bioremediation of recalcitrant environmental pollutants and their engineering. It provides a comprehensive summary of most factors to consider while working with laccases in an industrial setting. It compares the benefits and drawbacks of the current techniques. Immobilization and mediators, two of the most significant aspects in working with laccases, have been meticulously discussed.

Nanomaterials: An alternative source for biodegradation of toxic dyes

Environment contamination is a colossal worriment across the world, owing to its detrimental and negative impact on health and ecological systems. Dyes are one of the synthetic organic chemicals that are utilised in a variety of fields, including textiles. As a result, throughout one's production and subsequently in fibre colouring, these are becoming frequent industry-contributed contaminants. Increasing globalisation of international market has presented a problem to textile sector in terms of consistency and production. Textile processors' primary concern, as the highly competitive environment and environmental standards grow more severe is about being mindful of the grade of goods and even non-toxicity of their production processes. There seems to be an immediate necessity to look for methods and technologies which are useful in removing dye colours. Even though each has benefits and weaknesses, many physical, chemical, and biological approaches were explored and used with the application being dependent on the effluent properties, technical feasibility, and cost. Several remediation technologies are already developed, but they seem to be ineffective at removing dyes completely. There is a fast growth of nanoparticles applications in the past few years which has opened up newer, innovating, highly efficient, and low-cost dyes remediation systems. Nanomaterials with large surface areas change surface characteristics and distinctive electron conducting capabilities which make them ideal candidate for the treatment of wastewater that contains dyes. In this review, we have highlighted not only the role of nanotechnology in dye remediation processes but also different types of nanomaterials that can be used for the remediation of dyes.

Laccases—Versatile Enzymes Used to Reduce Environmental Pollution

The accumulation of waste and toxic compounds has become increasingly harmful to the environment and human health. In this context, the use of laccases has become a focus of interest, due to the properties of these versatile enzymes: low substrate specificity, and water formation as a non-toxic end product. Thus, we begin our study with a general overview of the importance of laccase for the environment and industry, starting with the sources of laccases (plant, bacterial and fungal laccases), the structure and mechanism of laccases, microbial biosynthesis, and the immobilization of laccases. Then, we continue with an overview of agro-waste treatment by laccases wherein we observe the importance of laccases for the biodisponibilization of substrates and the biodegradation of agro-industrial byproducts; we then show some aspects regarding the degradation of xenobiotic compounds, dyes, and pharmaceutical products. The objective of this research is to emphasize and fully investigate the effects of laccase action on the decomposition of lignocellulosic materials and on the removal of harmful compounds from soil and water, in order to provide a sustainable solution to reducing environmental pollution.

Modulation of laccase catalysed oxidations at the surface of magnetic nanoparticles

We explored the coupling of laccases to magnetic nanoparticles (MNPs) with different surface chemical coating. Two laccase variants offering two opposite and precise orientations of the substrate oxidation site were immobilised onto core-shell MNPs presenting either aliphatic aldehyde, aromatic aldehyde or azide functional groups at the particles surface. Oxidation capabilities of the six-resulting laccase-MNP hybrids were compared on ABTS and coniferyl alcohol. Herein, we show that the original interfaces created differ substantially in their reactivities with an amplitude from 1 to > 4 folds depending on the nature of the substrate. Taking enzyme orientation into account in the design of surface modification represents a way to introduce selectivity in laccase catalysed reactions.

A comprehensive insight into the application of white rot fungi and their lignocellulolytic enzymes in the removal of organic pollutants

Environmental problems resultant from organic pollutants are a major current challenge for modern societies. White rot fungi (WRF) are well known for their extensive organic compound degradation abilities. The unique oxidative and extracellular ligninolytic systems of WRF that exhibit low substrate specificity, enable them to display a considerable ability to transform or degrade different environmental contaminants. In recent decades, WRF and their ligninolytic enzymes have been widely applied in the removal of polycyclic aromatic hydrocarbons (PAHs), pharmaceutically active compounds (PhACs), endocrine disruptor compounds (EDCs), pesticides, synthetic dyes, and other environmental pollutants, wherein promising results have been achieved. This review focuses on advances in WRF-based bioremediation of organic pollutants over the last 10 years. We comprehensively document the application of WRF and their lignocellulolytic enzymes for removing organic pollutants. Moreover, potential problems and intriguing observations that are worthy of additional research attention are highlighted. Lastly, we discuss trends in WRF-remediation system development and avenues that should be considered to advance research in the field.

Novel Strategy of Mussel-Inspired Immobilization of Naringinase with High Activity Using a Polyethylenimine/Dopamine Co-deposition Method

Mussel-inspired surface chemistry is recognized as a simple, efficient, and mild surface modification method and has become a research hotspot in many fields. In this study, polyethylenimine/dopamine was coated on the surface of SBA-15 using a co-deposition method, making it possible to immobilize naringinase with high activity and operation stability. The optimal modification and immobilization conditions as well as enzyme properties were investigated. The naringinase activity can reach up to 753.78 U/g carrier, which was much higher than those of the previous works. Besides, the residual naringinase activity still kept 78.91% of the initial activity after one month of storage and maintained 60.79% after 8 cycles. Therefore, the strategy of mussel-inspired enzyme immobilization could be recognized as a promising and universal enzyme immobilization method, with the advantages of high relative enzyme activity, enzyme carrying rate, enzyme activity recovery rate, and good reusability and storage stability.

Emerging nanobiotechnology in agriculture for the management of pesticide residues

Utilization of pesticides is often necessary for meeting commercial requirements for crop quality and yield. However, incessant global pesticide use poses potential risks to human and ecosystem health. This situation increases the urgency of developing nano-biotechnology-assisted pesticide formulations that have high efficacy and low risk of side effects. The risks associated with both conventional and nanopesticides are summarized in this review. Moreover, the management of residual pesticides is still a global challenge. The contamination of soil and water resources with pesticides has adverse impact over agricultural productivity and food security; ultimately posing threats to living organisms. Pesticide residues in the eco-system may be treated via several biological and physicochemical processes, such as microbe-based degradation and advanced oxidation processes. With these issues in mind, we present a review that explores both existing and emerging techniques for management of pesticide residues and environmental risks. These techniques can offer a sustainable solution to revitalize the tarnished water/soil resources. Further, state-of-the-art research approaches to investigate biotechnological alternatives to conventional pesticides are discussed along with future prospects and mitigation techniques are recommended.

Immobilization of Laccase on Magnetic Nanoparticles and Application in the Detoxification of Rice Straw Hydrolysate for the Lipid Production of Rhodotorula glutinis

The production of microbial lipid using lignocellulosic agroforestry residues has attracted much attention. But, various inhibitors such as phenols and furans, which are produced during lignocellulosic hydrolysate preparation, are harmful to microbial lipid accumulation. Herein, we developed a novel detoxification strategy of rice straw hydrolysate using immobilized laccase on magnetic Fe₃O₄ nanoparticles for improving lipid production of Rhodotorula glutinis. Compared with free laccase, the immobilized laccase on magnetic nanoparticles showed better stability, which still retained 76% of original activity at 70 °C and 56% at pH 2 for 6 h. This immobilized laccase was reused to remove inhibitors in acid-pretreated rice straw hydrolysate through recycling with external magnetic field. The results showed that most of phenols, parts of furans, and formic acids could be removed by immobilized laccase after the first batch. Notably, the immobilized laccase exhibited good reusability in repeated batch detoxification. 78.2% phenols, 43.8% furfural, 30.4% HMF, and 16.5% formic acid in the hydrolysate were removed after the fourth batch. Furthermore, these detoxified rice straw hydrolysates, as substrates, were applied to the lipid production of Rhodotorula glutinis. The lipid yield in detoxified hydrolysate was significantly higher than that in undetoxified hydrolysate. These findings suggest that the immobilized laccase on magnetic nanoparticles has a potential to detoxify lignocellusic hydrolysate for improving microbial lipid production.

Improved performance of immobilized laccase on Fe3O4@C-Cu2+ nanoparticles and its application for biodegradation of dyes

An effective strategy for enhancement of catalytic activity and stability of immobilized laccase via metal affinity adsorption on Fe₃O₄@C-Cu²⁺ nanoparticles was developed, which involved the fabrication of hydroxyl and carboxyl functionalized Fe₃O₄@C nanoparticles via a simple hydrothermal process and the subsequent chelation with Cu²⁺ for the immobilization of laccase under a mild condition. Our results revealed that the Fe₃O₄@C-Cu²⁺ nanoparticles possess a high loading amount of bovine serum albumin (BSA, 436 mg/g support) and laccase activity recovery of 82.3 % after immobilization. Laccase activity assays indicated that thermal and pH stabilities, and resistances to organic solvents and metal ions of the immobilized laccase were relatively higher than those of the free enzyme. The immobilized laccase maintained more than 61 % of its original activity after 10 consecutive reuses. Most importantly, the immobilized laccase possessed excellent degradation of diverse synthetic dyes. The degradation rates of malachite green (MG), brilliant green (BG), crystal violet (CV), azophloxine, Procion red MX-5B, and reactive blue 19 (RB19) was approximately 99, 93, 79, 88, 75 and 81 (%) in the first cycle. Even after 10 consecutive reuses, the removal efficiencies of the six dyes were found to be 94, 80, 71, 78, 60, and 65 (%), respectively.

Green polymeric nanomaterials for the photocatalytic degradation of dyes: a review

Pure and drinkable water will be rarer and more expensive as the result of pollution induced by industrialisation, urbanisation and population growth. Among the numerous sources of water pollution, the textile industry has become a major issue because effluents containing dyes are often released in natural water bodies. For instance, about two years are needed to biodegrade dye-derived, carcinogenic aromatic amines, in sediments. Classical remediation methods based upon physicochemical reactions are costly and still generate sludges that contain amine residues. Nonetheless, recent research shows that nanomaterials containing biopolymers are promising to degrade organic pollutants by photocatalysis. Here, we review the synthesis and applications of biopolymeric nanomaterials for photocatalytic degradation of azo dyes. We focus on conducting biopolymers incorporating metal, metal oxide, metal/metal oxide and metal sulphide for improved biodegradation. Biopolymers can be obtained from microorganisms, plants and animals. Unlike fossil-fuel-derived polymers, biopolymers are carbon neutral and thus sustainable in the context of global warming. Biopolymers are often biodegradable and biocompatible.

Integration of catalytic ozonation and adsorption processes for increased efficiency of textile wastewater treatment

Advanced and optimized textile wastewater treatment by catalytic ozonation and activated carbon (AC) adsorption was investigated. Scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy indicated that Mn and Ce oxides were successfully loaded on the γ-Al₂ O₃ support, and MnO₂ , Mn₂ O₃ , CeO₂ , and Ce₂ O₃ were the main components of the catalyst. Actual textile wastewater from biochemical effluent was used as experiment wastewater. The removal efficiencies of chemical oxygen demand (COD) and chromaticity were approximately 30.6% (414-287 mg/L on average) and 99.3% (4,033 times to 27 times on average), respectively during the 30-day on-site continuous-flow test with an ozone dosage, contact time, and gas-liquid ratio of 100 mg/L, 15.7 min, and 2.9, respectively. Following 1 g/L AC adsorption, the effluent COD concentration was reduced to 40 mg/L. By contrast, AC adsorption without catalytic ozonation as pretreatment required 10 g/L AC dosage to achieve similar treatment results. Gas chromatography-mass spectrometry analyses indicated that volatile phenols, sulfides, and aniline in wastewater were completely removed after treatment. Inductively coupled plasma results further showed that the active components of MnO_x -CeO_x in the catalyst were stable after continuous use for 60 days. PRACTITIONER POINTS: Mesoporous catalyst synthesized by impregnating MnO_x -CeO_x on γ-Al₂ O₃ support. Catalytic ozonation and AC adsorption were combined to degrade organics. Maximum degradation of COD and chromaticity by optimizing process variables. The efficiency of the method was compared to that of single AC adsorption.

Characterisation of electron beam irradiation-immobilised laccase for application in wastewater treatment

Laccase from Phoma sp. UHH 5-1-03 was cross-linked to polyvinylidene fluoride membranes by electron beam irradiation. Immobilised laccase displayed a higher stability than the non-immobilised enzyme with respect to typical wastewater temperatures, and pH at a range of 5 to 9. Batch tests addressed the removal of pharmaceutically active compounds (PhACs; applied as a mixture of acetaminophen, bezafibrate, indometacin, ketoprofen, mefenamic acid, and naproxen) by both immobilised and non-immobilised laccase in municipal wastewater. High removal rates (>85%) of the most efficiently oxidised PhACs (acetaminophen and mefenamic acid) indicated a high efficiency of the immobilised laccase in wastewater. Continuous elimination of the aforementioned PhACs by the immobilised enzyme in a continuously operated diffusion basket reactor yielded a PhAC removal pattern qualitatively similar to those observed in batch tests. Clearly higher apparent V_max values and catalytic efficiencies (in terms of both V_max/S_0.5 as well as V_max/K_m values obtained from data fitting according to the Hill and the Michaelis-Menten model, respectively) observed for acetaminophen oxidation by the immobilised compared to the non-immobilised enzyme are in support of a considerably higher functional stability of the immobilised laccase especially in wastewater. The potential influence of acetaminophen on the removal of comparatively less laccase-oxidisable water pollutants such as the antimicrobial triclosan (TCS) was investigated. TCS was increasingly removed upon increasing the initial acetaminophen concentration in immobilised as well as non-immobilised laccase reaction systems until saturation became evident. Acetaminophen was consumed and not recycled during laccase reactions, which was accompanied by the formation of various acetaminophen-TCS cross-coupling products. Nevertheless, the simultaneous presence of acetaminophen (and potentially even more pollutant removal-enhancing laccase substrates) and more recalcitrant pollutants in wastewater represents an interesting option for the efficiency enhancement of enzyme-based wastewater treatment approaches.

Attachment of enzymes to hydrophilic magnetic nanoparticles through DNA-directed immobilization with enhanced stability and catalytic activity

An efficient enzyme immobilization strategy based on DNA directed immobilization on hydrophilic polydopamine (PDA) modified magnetic nanoparticles was developed in this study.

Nitrogen rich core-shell magnetic mesoporous silica as an effective adsorbent for removal of silver nanoparticles from water

The production and increasing use of silver nanoparticles (AgNPs) obviously results in their release into the environment, leading to a risk to the environment due to their toxic effects. Thus, the removal of AgNPs from water is highly needed. Here, we demonstrate that nitrogen rich (∼10% nitrogen content) core-shell magnetic mesoporous silica is a promising adsorbent for the removal of AgNPs. For this, the poly(ethylenimine) functionalized core-shell magnetic mesoporous silica composites (Fe₃O₄@SiO₂-PEI) were prepared, and characterized by TEM, FT-IR, XRD, TG and N₂ adsorption-desorption. The removal of AgNPs by Fe₃O₄@SiO₂-PEI as a function of contact time, concentration of AgNPs, solution pH and ionic strength were studied. The adsorption kinetic data could be described by the pseudo-second-order rate model. Both Langmuir and Freundlich models fitted the adsorption data well. The adsorption capacity for AgNPs is 909.1mg/g, which is 5-181 times higher than that of the previously reported adsorbents for AgNPs. Interestingly, the silver adsorbed onto Fe₃O₄@SiO₂-PEI exhibits highly catalytic activity for 4-nitropheol (4-NP) reduction with a rate constant of 0.072min^-1, which is much higher than those by other AgNPs reported before. The silver-loaded Fe₃O₄@SiO₂-PEI promises good recyclability for at least five cycles, showing great potential in practical applications.

An overview of nanomaterials applied for removing dyes from wastewater

Organic dyes are one of the most commonly discharged pollutants in wastewaters; however, many conventional treatment methods cannot treat them effectively. Over the past few decades, we have witnessed rapid development of nanotechnologies, which offered new opportunities for developing innovative methods to treat dye-contaminated wastewater with low price and high efficiency. The large surface area, modified surface properties, unique electron conduction properties, etc. offer nanomaterials with excellent performances in dye-contaminated wastewater treatment. For examples, the agar-modified monometallic/bimetallic nanoparticles have the maximum methylene blue adsorption capacity of 875.0 mg/g, which are several times higher than conventional adsorbents. Among various nanomaterials, the carbonaceous nanomaterials, nano-sized TiO₂, and graphitic carbon nitride (g-C₃N₄) are considered as the most promising nanomaterials for removing dyes from water phase. However, some challenges, such as high cost and poor separation performance, still limit their engineering application. This article reviewed the recent advances in the nanomaterials used for dye removal via adsorption, photocatalytic degradation, and biological treatment. The modification methods for improving the effectiveness of nanomaterials are highlighted. Finally, the current knowledge gaps of developing nanomaterials on the environmental application were discussed, and the possible further research direction is proposed.

Applications of white rot fungi in bioremediation with nanoparticles and biosynthesis of metallic nanoparticles

White rot fungi (WRF) are important environmental microorganisms that have been widely applied in many fields. To our knowledge, the application performance of WRF in bioremediation can be greatly improved by the combination with nanotechnology. And the preparation of metallic nanoparticles using WRF is an emerging biosynthesis approach. Understanding the interrelation of WRF and nanoparticles is important to further expand their applications. Thus, this mini-review summarizes the currently related reports mainly from the two different point of views. We highlight that nanoparticles as supports or synergistic agents can enhance the stability and bioremediation performance of WRF in wastewater treatment and the biosynthesis process and conditions of several important metallic nanoparticles by WRF. Furthermore, the potential toxicity of nanoparticles on WRF and challenges encountered are also discussed. Herein, we deem that this mini-review will strengthen the basic knowledge and provide valuable insight for the applications of WRF and nanoparticles.

Eco-Friendly Composite of Fe3O4-Reduced Graphene Oxide Particles for Efficient Enzyme Immobilization

A novel type of spherical and porous composites were synthesized to dually benefit from reduced graphene oxide (rGO) and magnetic materials as supports for enzyme immobilization. Three magnetic composite particles of Fe₃O₄ and rGO containing 71% (rGO-Fe₃O₄-M1), 36% (rGO-Fe₃O₄-M2), and 18% (rGO-Fe₃O₄-M3) Fe were prepared using a one-pot spray pyrolysis method and were used for the immobilization of the model enzymes, laccase and horseradish peroxidase (HRP). The rGO-Fe₃O₄ composite particles prepared by spray pyrolysis process had a regular shape, finite size, and uniform composition. The immobilization of laccase and HRP on rGO-Fe₃O₄-M1 resulted in 112 and 89.8% immobilization efficiency higher than that of synthesized pure Fe₃O₄ and rGO particles, respectively. The stability of laccase was improved by approximately 15-fold at 25 °C. Furthermore, rGO-Fe₃O₄-M1-immobilized laccase exhibited 92.6% of residual activity after 10 cycles of reuse and was 192% more efficient in oxidizing different phenolic compounds than the free enzyme. Therefore, these unique composite particles containing rGO and Fe₃O₄ may be promising supports for the efficient immobilization of industrially important enzymes with lower acute toxicity toward Vibrio fischeri than commercial pure Fe₃O₄ particles.

Towards high potential magnetic biocatalysts for on-demand elimination of pharmaceuticals

The present study investigated the applicability of a laccase based bioprocess for the treatment of a mixture containing 13 selected pharmaceuticals. To do so, laccase was immobilized as cross-linked enzyme aggregates (MAC-CLEAs) on amine functionalized magnetic nanoparticles using chitosan/1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide hydrochloride (EDAC) as the cross-linking system. The activity recovery of laccase reached 61.4% under the optimal conditions of MAC-CLEAs formation. The latter exhibited enhanced storage stability over one year at 4°C and showed better temperature resistance compared to its soluble counterpart. The biocatalysts were properly recycled and the catalytic activity recovery was good even after a hundred and fifty batch reactions. Complete removal of pharmaceuticals like acetaminophen, diclofenac, mefenamic acid, atenolol and epoxy carbamazepine and partial removal of fenofibrate, diazepam, trimethoprim, and ketoprofen by laccase was achieved within 12h of incubation, whereas efficient removal of indometacin required the presence of mediator.