Photocatalytic Degradation of Naphthalene by Electrospun Mesoporous Carbon-Doped Anatase TiO2 Nanofiber Mats

Kinetics analysis of PAHs degradation using SiO2-ZnO nanoparticles and evaluating their antibacterial and antibiofilm efficacy

The adsorption of Polycyclic aromatic hydrocarbons (PAHs) using nanoparticles is gaining significant attention due to the rapid removal or treatment rates. In this study, Silicon Dioxide-Zinc Oxide nanoparticles (SiO2-ZnO NPs) were synthesized to adsorb pyrene. Physicochemical characterization of SiO2-ZnO NPs showed plasmon resonance at 323 nm, agglomeration, irregular dispersion, and diameters of 90-100 nm. FT-IR analysis identified major functional groups on SiO2-ZnO NPs, including alkyne, amine, and isothiocyanate. SiO2-ZnO NPs demonstrated significant pyrene adsorption at pH 5, with 10 μg/mL of SiO2-ZnO NPs and 2 μg/mL of PAHs, performing better under UV irradiation. Two isotherm models, adsorption isotherm and kinetics adsorption, were used to analyze the PAHs adsorption by SiO2-ZnO NPs. Additionally, SiO2-ZnO NPs were tested for antibacterial and antibiofilm activities against both Gram-negative and Gram-positive bacteria. At a concentration of 150 μg/mL, SiO2-ZnO NPs produced inhibition zones of 21.57 mm, 20.30 mm, 19.30 mm, and 11.30 mm against Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and Klebsiella pneumoniae, respectively. They also inhibited and disrupted biofilms of Micrococcus luteus and Acinetobacter baumannii. Furthermore, SiO2-ZnO NPs exhibited photocatalytic degradation of lead, achieving 68.24% degradation within 5 h of treatment. Therefore, SiO2-ZnO NPs are efficient candidates for multiple applications, including pyrene adsorption, bacterial biofilm disruption, and lead degradation under sunlight.

A water-soluble small molecular fluorescent sensor based on phosphazene platform for selective detection of nitroaromatic compounds

Nitro-aromatic compounds have a deleterious effect on the environment and they are extremely explosive. Therefore, societal concern about exposure to nitro-aromatic compounds encourages researchers to develop selective and sensitive detection platforms for nitro-aromatic compounds in recent years. In this paper, a new 100% water-soluble cyclotriphosphazene-based bridged naphthalene material (4) was prepared as a small molecule fluorescent sensor for ultra-selective detection of nitro-aromatic compounds. The chemical structure of 4 was extensively characterized by mass spectrometry and nuclear magnetic resonance spectroscopies (³¹P, ¹³C, ¹H). The photo-physical properties of the newly developed sensing system were investigated by steady-state fluorescence and UV-Vis absorption spectroscopies. The fluorescence sensor behaviors were extensively evaluated after treatment with the most commonly used metal cations, anions, competitive aromatic compounds, saccharides, and organic acids. The developed fluorescent sensing system (4) demonstrated ultra-selective fluorescence "turn-off" signal change toward nitro-aromatic compounds while other tested competitive species caused negligible changes. To evaluate selectivity, time-resolved, steady-state 3D-fluorescence and UV-Vis absorption spectroscopies were used in fully aqueous media. Moreover, theoretical calculations (density functional theory and time-dependent density functional theory) were applied and discussed to identify fluorescence sensing mechanisms toward nitroaromatic compounds for the presented sensing system.

Versatile Carbon Nanofiber-Based Sensors

Carbon nanofibers (CNFs) display colossal potential in different fields like energy, catalysis, biomedicine, sensing, and environmental science. CNFs have revealed extensive uses in various sensing platforms due to their distinctive structure, properties, function, and accessible surface functionalization capabilities. This review presents insight into various fabrication methods for CNFs like electrospinning, chemical vapor deposition, and template methods with merits and demerits of each technique. Also, we give a brief overview of CNF functionalization. Their unique physical and chemical properties make them promising candidates for the sensor applications. This review offers detailed discussion of sensing applications (strain sensor, biosensor, small molecule detection, food preservative detection, toxicity biomarker detection, and gas sensor). Various sensing applications of CNF like human motion monitoring and energy storage and conversion are discussed in brief. The challenges and obstacles associated with CNFs for futuristic applications are discussed. This review will be helpful for readers to understand the different fabrication methods and explore various applications of the versatile CNFs.

TiO2–Based Nanofibrous Membranes for Environmental Protection

Electrospinning is a unique technique that can be used to synthesize polymer and metal oxide nanofibers. In materials science, a very active field is represented by research on electrospun nanofibers. Fibrous membranes present fascinating features, such as a large surface area to volume ratio, excellent mechanical behavior, and a large surface area, which have many applications. Numerous techniques are available for the nanofiber’s synthesis, but electrospinning is presented as a simple process that allows one to obtain porous membranes containing smooth non-woven nanofibers. Titanium dioxide (TiO2) is the most widely used catalyst in photocatalytic degradation processes, it has advantages such as good photocatalytic activity, excellent chemical stability, low cost and non-toxicity. Thus, titanium dioxide (TiO2) is used in the synthesis of nanofibrous membranes that benefit experimental research by easy recyclability, excellent photocatalytic activity, high specific surface areas, and exhibiting stable hierarchical nanostructures. This article presents the synthesis of fiber membranes through the processes of electrospinning, coaxial electrospinning, electrospinning and electrospraying or electrospinning and precipitation. In addition to the synthesis of membranes, the recent progress of researchers emphasizing the efficiency of nanofiber photocatalytic membranes in removing pollutants from wastewater is also presented.

Hybrid metal organic frameworks as an Exotic material for the photocatalytic degradation of pollutants present in wastewater: A review

In this world, water is considered as the Elixir for all living creatures. Human life rolls with water, and every activity depends upon water. Worldwide water resources are being contaminated due to the elevation in the population count, industrialization and urbanization. Ejection of chemicals by industries and domestic sewages remains the major reason in the destruction of natural water resources. Contaminated water with harmful microbes, chemical dyes, pesticides, and carcinogens are the root cause of many diseases and deaths of living species. In this scenario, researchers engaged in producing ultra components to remove the contaminants. Metal organic frameworks (MOF) are the desired combination of organic and inorganic materials to achieve the required target. MOFs possess unique characteristics like tunable internal structure, porosity, crystallinity and high surface area which enable them for energy and environmental application. For the past years, MOFs are concentrated more as a photocatalyst in the treatment of polluted water. These research studies discuss the improvement of photocatalytic performance of MOF by the incorporation of metals, metal coupled with nanoparticles like polymers, graphene, etc., into it to achieve the enhanced photocatalytic activity by scavenging entire chemicals and harmful microbes to retain the quality of water. The target of this review article is to focus on the state of the art research work on MOFs in photocatalytic water treatment technique.

Electrospun Metal Oxide Nanofibers and Their Conductometric Gas Sensor Application. Part 1: Nanofibers and Features of Their Forming

Electrospun metal oxide nanofibers, due to their unique structural and electrical properties, are now being considered as materials with great potential for gas sensor applications. This critical review attempts to assess the feasibility of these perspectives. The article in Part 1 discusses the basic principles of electrospinning and the features of the formation of metal oxide nanofibers using this method. Approaches to optimization of nanofibers’ parameters important for gas sensor application are also considered.

Preparation of TiO2/WO3/C/N Composite Nanofibers by Electrospinning Using Precursors Soluble in Water and Their Photocatalytic Activity in Visible Light

Extending the absorption range of TiO₂ nanofibers to visible light is a great improvement of the photocatalytic property of TiO₂. In this study, TiO₂/WO₃/C/N nanofibers were prepared by electrospinning using precursors soluble in water then annealing in argon. Titanium(IV) bis(ammonium lactato)dihydroxide (TiBALDH) and ammonium metatungstate (AMT) were used as the precursor for TiO₂ and WO₃ respectively. Different volume ratios of the precursors were added to a solution of PVP before electrospinning. The fibers were studied by XPS, SEM-EDX, TEM, FTIR, XRD, Raman spectroscopy and UV–VIS diffuse reflectance spectroscopy (DRS). The photocatalytic degradation of methylene blue by the fibers in visible light was investigated. The fibers had anatase TiO₂ and monoclinic WO₃. Based on UV–VIS DRS and Kubelka-Munk function the fibers could absorb visible light. Moreover, 100% TiBALDH had an indirect band gap of 2.9 eV, and the band gap decreased with increase in AMT, i.e., for 0% TiBALDH, band gap was 2.4 eV. The fibers degraded methylene blue dye in visible light, and 90% TiBALDH had the highest photocatalytic activity, i.e., it degraded 40% of the dye after 240 min.

Photocatalytic H2 Production from Naphthalene by Various TiO2 Photocatalysts: Impact of Pt Loading and Formation of Intermediates

This work presents a comparative study of the efficiency of two commercial TiO2 photocatalysts, Aeroxide P25 (ATiO2) and Sachtleben Hombikat UV100 (HTiO2), in H2 production from an aqueous solution of naphthalene. The TiO2 photocatalysts were platinized by the photodeposition method varying the platinum content of the suspension to 0.5, 1.0, and 5.0 wt%. A full physicochemical characterization for these materials was performed, showing no structural effects from the deposition method, and confirming a well dispersion of nanosized-Pt0 particles on the surface of both photocatalysts. Pristine ATiO2 shows around 14% higher photocatalytic fractional conversion of naphthalene than pristine HTiO2 after 240 min of irradiation, while both materials exhibit negligible activity for H2 formation. The 0.5 wt% Pt- HTiO2 increases the photocatalytic fractional conversion of naphthalene from 71% to 82% and produces 6 µmol of H2. However, using a higher Pt content than the optimal platinization ratio of 0.5 wt% dramatically inhibits both processes. On the other hand, regardless of the fractional ratio of Pt, the platinization of ATiO2 results in a decrease in the fractional conversion of naphthalene by 4% to 33% of the pristine value. Although the presence of Pt islands on the surface of the ATiO2 is essential for the H2 evolution, no dependency between the Pt ratio and the H2 formation rate was observed since all the platinized materials show a similar H2 formation of around 3 µmol. Based on the EPR results, the higher photocatalytic activity of the Pt-HTiO2 is attributed to the efficient charge carrier separation and its larger surface area. The recyclability test confirms that the inhibition of the photocatalytic process is related to the deactivation of the photocatalyst surface by the adsorption of the photoformed intermediates. A strong relationship between the photocatalytic activity and the kind of the aromatic compounds was observed. The H2 evolution and the photooxidation of the aromatic hydrocarbons exhibit higher photonic efficiencies than that of their corresponding hydroxylated compounds over the Pt-HTiO2.

Electrospun-based TiO2 nanofibers for organic pollutant photodegradation: a comprehensive review

Titanium dioxide (TiO2) is commonly used as a photocatalyst in the removal of organic pollutants. However, weaknesses of TiO2 such as fast charge recombination and low visible light usage limit its industrial application. Furthermore, photocatalysts that are lost during the treatment of pollutants create the problem of secondary pollutants. Electrospun-based TiO2 fiber is a promising alternative to immobilize TiO2 and to improve its performance in photodegradation. Some strategies have been employed in fabricating the photocatalytic fibers by producing hollow fibers, porous fibers, composite TiO2 with magnetic materials, graphene oxide, as well as doping TiO2 with metal. The modification of TiO2 can improve the absorption of TiO2 to the visible light area, act as an electron acceptor, provide large surface area, and promote the phase transformation of TiO2. The improvement of TiO2 properties can enhance carrier transfer rate which reduces the recombination and promotes the generation of radicals that potentially degrade organic pollutants. The recyclability of fibers, calcination effect, photocatalytic reactors used, operation parameters involved in photodegradation as well as the commercialization potential of TiO2 fibers are also discussed in this review.

Thermally Sensitized Membranes for Crude Oil-Water Remediation under Visible Light

Effective remediation of produced water requires separating crude oil-water mixture and removing the dissolved organic pollutants. Membranes with selective wettability for water over oil enable the gravity-driven separation of an oil-water mixture by allowing water to permeate through while repelling oil. However, these membranes are often limited by their inability to remove the dissolved organic pollutants. In this work, a membrane with in-air superhydrophilic and underwater superoleophobic wettability is fabricated by thermal annealing of a stainless steel mesh. The resulting membrane possesses a hierarchical surface texture covered with a photocatalytic oxide layer composed of iron oxide and chromium oxide. The membrane exhibits chemical and mechanical robustness, which makes it suitable for remediation of crude oil and water mixture. Further, after being fouled by crude oil, the membrane can recover its inherent water-rich permeate flux upon visible light irradiation. Finally, the membrane demonstrates that it can separate surfactant-stabilized crude oil-in-water emulsion under gravity and decontaminate water-rich permeate by photocatalytic degradation of dissolved organic pollutants upon continuous irradiation of visible light.

Performance Evaluation of an Electrospun Nanofiber Mat as Samplers for the Trap of Trace Heavy Metals in Atmospheric Particles and Its Application

Traditional methods for the analysis of trace heavy metals in the atmosphere require collecting atmospheric particles on filter substrates, such as cellulose, quartz fiber member, etc. In this paper, we report on a different filter to capture trace heavy metals in atmospheric particulates. Four kinds of electrospun nanofiber filters, polystyrene (PS), polystyrene-dithizone (PS-DZ), acrylic acid (AR), and acrylic acid-dithizone (AR-DZ) were produced by electrospinning, and used as filters to trap heavy metals in atmospheric particles. Based on these nanofiber filters, the digestion method and eluent were optimized. Under the optimal conditions (oscillation extraction with acetic acid-potassium acetate (HAC-KAC) buffer solution (0.1 mol L^-1, pH = 4.5)), the developed method was successfully applied to determine the four particulate metal elements (As, Cd, Hg, and Pb) in air in two urban areas of Suzhou, China. Furthermore, a correlation between heavy metals in air and breast milk was observed. The results confirmed that an electrospun nanofiber mat could be a potential candidate for the sampling of heavy metals in atmospheric particles with higher efficiency.

Electrospun Nanofibers for Drug Delivery and Biosensing

Early diagnosis and efficient treatment are of paramount importance to fighting cancers. Monitoring the foreign body response of a patient to treatment therapies also plays an important role in improving the care that cancer patients receive by their medical practitioners. As such, there is extensive research being conducted into ultrasensitive point-of-care detection systems and "smart" personalized anticancer drug delivery systems. Electrospun nanofibers have emerged as promising materials for the construction of nanoscale biosensors and therapeutic platforms because of their large surface areas, controllable surface conformation, good surface modification, complex pore structure, and high biocompatibility. Electrospun nanofibers are produced by electrospinning, which is a very powerful and economically viable method of synthesizing versatile and scalable assemblies from a wide array of raw materials. This review describes the theory of electrospinning, achievements, and problems currently faced in producing effective biosensors/drug delivery systems, in particular, for cancer diagnosis and treatment. Finally, insights into future prospects are discussed.

Flexible and porous TiO2/SiO2/carbon composite electrospun nanofiber mat with enhanced interfacial charge separation for photocatalytic degradation of organic pollutants in water

Semiconductor photocatalysis has long been considered as a promising approach for remediation of polluted water. However, the high recombination rate of electrons and holes, as well as a low reaction rate, have impeded its large-scale applications. Therefore, it is of great importance to develop appropriate photocatalysts for promoting its practical application. In this study, a novel TiO₂/SiO₂/carbon electrospun nanofiber mat (TSC NFM) with flexibility and porous hierarchy has been successfully designed and fabricated by a facile method of electrospinning and carbonization. Characterization results show that the TSC NFM consists of closely-packed and well-distributed anatase (TiO₂) nanocrystals, amorphous SiO₂ nanoparticles, and carbon with interconnected meso- and macro-pores. The photocatalytic performance of the TSC NFM was evaluated by degrading rhodamine B and 4-nitrophenol in batch systems. The results show that TSC NFM exhibits a higher photocatalytic activity than TiO₂/SiO₂ nanofiber mat, which does not contain carbon. The enhanced performance of the TSC NFM can be attributed to the improved adsorption capacity toward the organic pollutants due to the presence of carbon and to the enhanced interfacial charge separation between TiO₂ nanoparticles and carbon. Besides, the as-prepared TSC NFM displays good stability and reusability. Notably, the flexible TSC NFM can be used in a continuous-flow reactor to efficiently treat wastewater. Our work provides new insights into the fabrication of carbon-based inorganic nanofiber mats, which have great potential in water treatment.

Photocatalytic degradation of naphthalene using calcined FeZnO/ PVA nanofibers

Recently, the incorporation of metal oxide nanoparticles into polymers has gained great attention owing to their ample of applications. The green mediated synthesis Fe-doped ZnO nanoparticles have been incorporated into PVA nanofibers through electro spinning for the application of photocatalytic degradation. The PVA polymer concentration was optimized to obtain uniform fibers without beads. The Fe-doped ZnO nanofibers were characterized by various analyzing techniques. The results show that good physicochemical with high surface area, uniformity in fiber with an average diameter ranges from 150 to 300 and 50-200 nm for un-calcined and calcined Fe-doped ZnO nanofiber respectively. The photocatalytic activity of nanofibers was examined by the degradation of naphthalene. The efficiency was observed 96 and 81% for calcined and un-calcined nanofibers, respectively. The reusable efficacy of Fe-doped ZnO calcined nanofiber as a catalyst was studied. These studies corroborated that the calcined Fe-doped ZnO nanofiber as promising material for catalytic applications.

Rapid degradation of unmanageable polycyclic aromatic hydrocarbons by a C-ZnO solid solution nanocatalyst

Unmanageable polycyclic aromatic hydrocarbons (PAHs) were rapidly degraded by a C atom-doped ZnO solid solution (C-ZnO SS) nanocatalyst due to the sucker effect.

Electrospun metal and metal alloy decorated TiO2 nanofiber photocatalysts for hydrogen generation

Photocatalytic hydrogen generation by electrospun TiO₂ nanofibers decorated with various co-catalysts (Pt₂Pd, PtCu, Cu, Pt, Pd) was explored.

Novel synthesis of magnetic, porous C/ZnFe2O4 photocatalyst with enhanced activity under visible light based on the Fenton-like reaction

Magnetic, porous C/ZnFe₂O₄ with highly visible-light activity in presence of H₂O₂ was one-pot fabricated through CO₂-mediated route.

Microfluidic Immuno-Biochip for Detection of Breast Cancer Biomarkers Using Hierarchical Composite of Porous Graphene and Titanium Dioxide Nanofibers

We report on a label-free microfluidic immunosensor with femtomolar sensitivity and high selectivity for early detection of epidermal growth factor receptor 2 (EGFR2 or ErbB2) proteins. This sensor utilizes a uniquely structured immunoelectrode made of porous hierarchical graphene foam (GF) modified with electrospun carbon-doped titanium dioxide nanofibers (nTiO2) as an electrochemical working electrode. Due to excellent biocompatibility, intrinsic surface defects, high reaction kinetics, and good stability for proteins, anatase nTiO2 are ideal for electrochemical sensor applications. The three-dimensional and porous features of GF allow nTiO2 to penetrate and attach to the surface of the GF by physical adsorption. Combining GF with functional nTiO2 yields high charge transfer resistance, large surface area, and porous access to the sensing surface by the analyte, resulting in new possibilities for the development of electrochemical immunosensors. Here, the enabling of EDC-NHS chemistry covalently immobilized the antibody of ErbB2 (anti-ErbB2) on the GF-nTiO2 composite. To obtain a compact sensor architecture, the composite working electrode was designed to hang above the gold counter electrode in a microfluidic channel. The sensor underwent differential pulse voltammetry and electrochemical impedance spectroscopy to quantify breast cancer biomarkers. The two methods had high sensitivities of 0.585 μA μM(-1) cm(-2) and 43.7 kΩ μM(-1) cm(-2) in a wide concentration range of target ErbB2 antigen from 1 × 10(-15) M (1.0 fM) to 0.1 × 10(-6) M (0.1 μM) and from 1 × 10(-13) M (0.1 pM) to 0.1 × 10(-6) M (0.1 μM), respectively. Utilization of the specific recognition element, i.e., anti-ErbB2, results in high specificity, even in the presence of identical members of the EGFR family of receptor tyrosine kinases, such as ErbB3 and ErbB4. Many promising applications in the field of electrochemical detection of chemical and biological species will derive from the integration of the porous GF-nTiO2 composite into microfluidic devices.

Synthesis, characterization, and photocatalytic activity of porous La-N-co-doped TiO2 nanotubes for gaseous chlorobenzene oxidation

The photocatalytic oxidation of gaseous chlorobenzene (CB) by the 365nm-induced photocatalyst La/N-TiO2, synthesized via a sol-gel and hydrothermal method, was evaluated. Response surface methodology (RSM) was used to model and optimize the conditions for synthesis of the photocatalyst. The optimal photocatalyst was 1.2La/0.5N-TiO2 (0.5) and the effects of La/N on crystalline structure, particle morphology, surface element content, and other structural characteristics were investigated by XRD (X-ray diffraction), TEM (Transmission Electron Microscopy), FTIR (Fourier transform infrared spectroscopy), UV-vis (Ultraviolet-visible spectroscopy), and BET (Brunauer Emmett Teller). Greater surface area and smaller particle size were produced with the co-doped TiO2 nanotubes than with reference TiO2. The removal of CB was effective when performed using the synthesized photocatalyst, though it was less efficient at higher initial CB concentrations. Various modified Langmuir-Hinshelwood kinetic models involving the adsorption of chlorobenzene and water on different active sites were evaluated. Fitting results suggested that competitive adsorption caused by water molecules could not be neglected, especially for environments with high relative humidity. The reaction intermediates found after GC-MS (Gas chromatography-mass spectrometry) analysis indicated that most were soluble, low-toxicity, or both. The results demonstrated that the prepared photocatalyst had high activity for VOC (volatile organic compounds) conversion and may be used as a pretreatment prior to biopurification.

Quantum dot sensitized electrospun mesoporous titanium dioxide hollow nanofibers for photocatalytic applications

TiO₂ hollow nanofibers prepared by coaxial electrospinning were sensitized with CdS QDs by SILAR method and their photocatalytic dye degradation performance was investigated.

Recent advances in the synthesis and application of photocatalytic metal–metal oxide core–shell nanoparticles for environmental remediation and their recycling process

Metal–metal oxide core–shell nanoparticles have received enormous research attention owing to their fascinating physicochemical properties and extensive applications. In this review we have discussed the challenges and recent advances in their synthesis and application.

Facile reduction of para-nitrophenols: catalytic efficiency of silver nanoferns in batch and continuous flow reactors

Catalytic application of Ag-nanoferns grown over carbon microfibers by electrodeposition and compatible reactor design for batch and continuous flow operations.

Preparation and photocatalytic activity of WO3–MWCNT nanocomposite for degradation of naphthalene under visible light irradiation

Preparation and application of the novel and high performance WO₃–MWCNT photocatalyst for photodegradation of naphthalene under visible light irradiation.

Recent advances in electrospun metal-oxide nanofiber based interfaces for electrochemical biosensing

Synthesis of various electrospun metal-oxide nanofibers and their application towards electrochemical enzymatic and enzyme-free biosensor platforms has been critically discussed.

Anti-epidermal growth factor receptor conjugated mesoporous zinc oxide nanofibers for breast cancer diagnostics

We report the fabrication of an efficient, label-free, selective and highly reproducible immunosensor with unprecedented sensitivity (femto-molar) to detect a breast cancer biomarker for early diagnostics. Mesoporous zinc oxide nanofibers (ZnOnFs) are synthesized by electrospinning technique with a fiber diameter in the range of 50-150 nm. Fragments of ZnOnFs are electrophoretically deposited on an indium tin oxide glass substrate and conjugated via covalent or electrostatic interactions with a biomarker (anti-ErbB2; epidermal growth factor receptor 2). Oxygen plasma treatment of the carbon doped ZnOnFs generates functional groups (-COOH, -OH, etc.) that are effective for the conjugation of anti-ErbB2. ZnOnFs without plasma treatment that conjugate via electrostatic interactions were also tested for comparison. Label-free detection of the breast cancer biomarker by this point-of-care device is achieved by an electrochemical impedance technique that has high sensitivity (7.76 kΩ μM(-1)) and can detect 1 fM (4.34 × 10(-5) ng mL(-1)) concentration. The excellent impedimetric response of this immunosensor provides a fast detection (128 s) in a wide detection test range (1.0 fM-0.5 μM). The oxy-plasma treated ZnOnF immunoelectrode shows a higher association constant (404.8 kM(-1) s(-1)) indicating a higher affinity towards the ErbB2 antigen compared to the untreated ZnOnF immunoelectrode (165.6 kM(-1) s(-1)). This sensor is about an order of magnitude more sensitive than the best demonstrated in the literature based on different nanomaterials and about three orders of magnitude better than the ELISA standard for breast cancer biomarker detection. This proposed point-of-care cancer diagnostic offers several advantages, such as higher stability, rapid monitoring, simplicity, cost-effectiveness, etc., and should prove to be useful for the detection of other bio- and cancer markers.