Magnetic ZnFe2O4–C3N4 Hybrid for Photocatalytic Degradation of Aqueous Organic Pollutants by Visible Light

Facile Synthesis of gC3N4-Exfoliated BiFeO3 Nanocomposite: A Versatile and Efficient S-Scheme Photocatalyst for the Degradation of Various Textile Dyes and Antibiotics in Water

Water pollution engendered from textile dyes and antibiotics is a globally identified precarious concern that is causing dreadful risks to human health as well as aquatic lives. This predicament is escalating the quest to develop competent photocatalysts that can degrade these water pollutants under solar light irradiation. Herein, we report an efficient photocatalyst comprising a hierarchical structure by integrating the layered graphitic carbon nitride (gC3N4) with nanoflakes of exfoliated BiFeO3. The coexistence of these two semiconducting nanomaterials leads to the formation of an S-scheme heterojunction. This nanocomposite demonstrated its excellent photocatalytic activity toward the degradation of several textile dyes (Yel CL2R, Levasol Yellow-CE, Levasol Red-GN, Navy Sol-R, Terq-CL5B) and various antibiotics (such as tetracycline hydrochloride (TCH), ciprofloxacin (CPX), sulfamethoxazole (SMX), and amoxicillin (AMX)) under the simulated solar light irradiation. As this photocatalyst exhibits its versatile activity toward the degradation of several commercial dyes as well as antibiotics, this work paves the path to develop a reasonable, eco-benign, and highly efficient photocatalyst that can be used in the practical approach to remediate environmental pollution.

Fabrication of hybrid covalent triazine framework-zinc ferrite spinel to uplift visible light-driven photocatalytic organic pollutant degradation

The tunability of porous covalent triazine frameworks (CTFs) can mitigate poor photostability and rapid hole-electron recombination. Herein, an excellent improvement of visible light-driven photocatalytic pollutant degradation was achieved using a hybrid semiconductor of covalent triazine framework-zinc ferrite spinel catalysts (CTF-ZnFe₂O₄). The as-prepared CTF-ZnFe₂O₄ composites were fabricated using a facile one-pot ionothermal method. The hybrid photocatalysts were identified using X-ray diffraction (XRD), scanning electron microscopy/energy-dispersive X-ray (SEM-EDX), X-ray photoelectron spectrometer (XPS), Brunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR), and UV-visible diffuse reflection spectroscopy (UV-vis DRS) characterizations. The analysis reveals that hybridization successfully ensued and altered the crystallinity structure, morphology, surface area, and bandgap energy of hybrid material. It was found that CTF-ZnFe₂O₄ 90:10 is very effective for the degradation of MB in a UV-vis light photocatalytic process with the efficiency of 95.4% and k_obs of 0.421 min^-1 for degradation of 50 mg/L MB with 0.5 g/L dosages for 120 min. Additionally, the scavenger study, effect of additional oxidants, and stability were performed for the practical application of a hybrid photocatalyst. CTF-ZnFe₂O₄ 90:10 shows outstanding pollutant degradation in sunlight irradiation and high stability with only a 5.2% reduction after a five-times sequential recycling process. Moreover, the photocatalytic mechanism of as-prepared CTF-ZnFe₂O₄ was mainly influenced by [Formula: see text] radical compared to [Formula: see text] and [Formula: see text] radicals. Overall, The as-prepared CTF-ZnFe₂O₄ shows significant potential to be utilized for photocatalytic wastewater treatment.

Sn(IV)-Porphyrin-Based Nanostructures Featuring Pd(II)-Mediated Supramolecular Arrays and Their Photocatalytic Degradation of Acid Orange 7 Dye

Two robust Sn(IV)-porphyrin-based supramolecular arrays (1 and 2) were synthesized via the reaction of trans-Pd(PhCN)2Cl2 with two precursor building blocks (SnP1 and SnP2). The structural patterns in these architectures vary from 2D to 3D depending on the axial ligation of Sn(IV)-porphyrin units. A discrete 2D tetrameric supramolecule (1) was constructed by coordination of {(trans-dihydroxo)[5,10-bis(4-pyridyl)-15,20-bis(phenyl) porphyrinato]}tin(IV) (SnP1) with trans-PdCl2 units. In contrast, the coordination between the {(trans-diisonicotinato)[5,10-bis(4-pyridyl)-15,20-bis(phenyl)porphyrinato]}tin(IV) (SnP2) and trans-PdCl2 units formed a divergent 3D array (2). Axial ligation of the Sn(IV)-porphyrin building blocks not only alters the supramolecular arrays but also significantly modifies the nanostructures, including porosity, surface area, stability, and morphology. These structural changes consequently affected the photocatalytic degradation efficiency under visible-light irradiation towards acid orange 7 (AO) dye in an aqueous solution. The degradation efficiency of the AO dye in the aqueous solution was observed to be between 86% to 91% within 90 min by these photocatalysts.

Integration of Mn-ZnFe2O4 with S-g-C3N4 for Boosting Spatial Charge Generation and Separation as an Efficient Photocatalyst

The disposal of dyes and organic matter into water bodies has become a significant source of pollution, posing health risks to humans worldwide. With rising water demands and dwindling supplies, these harmful compounds must be isolated from wastewater and kept out of the aquatic environment. In the research presented here, hydrothermal synthesis of manganese-doped zinc ferrites’ (Mn-ZnFe₂O₄) nanoparticles (NPs) and their nanocomposites (NCs) with sulfur-doped graphitic carbon nitride (Mn-ZnFe₂O₄/S-g-C₃N₄) are described. The samples’ morphological, structural, and bonding features were investigated using SEM, XRD, and FTIR techniques. A two-phase photocatalytic degradation study of (0.5, 1, 3, 5, 7, 9, and 11 wt.%) Mn-doped ZnFe₂O₄ NPs and Mn-ZnFe₂O₄/(10, 30, 50, 60, and 70 wt.%) S-g-C₃N₄ NCs against MB was carried out to find the photocatalyst with maximum efficiency. The 9% Mn-ZnFe₂O₄ NPs and Mn-ZnFe₂O₄/50% S-g-C₃N₄ NCs exhibited the best photocatalyst efficiency in phase one and phased two, respectively. The enhanced photocatalytic activity of the Mn-ZnFe₂O₄/50% S-g-C₃N₄ NCs could be attributed to synergistic interactions at the Mn-ZnFe₂O₄/50% S-g-C₃N₄ NCs interface that resulted in a more effective transfer and separation of photo-induced charges. Therefore, it is efficient, affordable, and ecologically secure to modify ZnFe₂O₄ by doping with Mn and homogenizing with S-g-C₃N₄. As a result, our current research suggests that the synthetic ternary hybrid Mn-ZnFe₂O₄/50% S-g-C₃N₄ NCs may be an effective photocatalytic system for degrading organic pollutants from wastewater.

Facile synthesis of magnetic ZnFe2O4/AC composite to activate peroxydisulfate for dye degradation under visible light irradiation

Heterogeneous photocatalysis/persulfate oxidation process has been considered as a promising technology for dye contaminants removal. The magnetic ZnFe₂O₄/active carbon (AC) composites were hydrothermally synthesized and firstly used to activate peroxydisulfate (PDS) for rhodamine B (RhB) degradation under visible LED light irradiation. The optimized Vis-ZnFe₂O₄/AC(4/1)-PDS system can enhance the RhB degradation efficiency by 32.01% and 13.87% compared with Vis-ZnFe₂O₄-PDS and Vis-AC-PDS systems, respectively. The influence of operational parameters such as catalyst dosage (0.2 - 0.4 g L^-1), PDS concentration (1.0 - 2.0 g L^-1), temperature (25 - 45 °C), solution pH (2.7 - 10.9), and coexisting inorganic ions (Cl^-, NO₃^-, HCO₃^-, PO₄^3-, Cu²⁺, Fe³⁺, and Ca²⁺) on RhB degradation was studied, and 100% of RhB (20 mg L^-1) was degraded after 80 min at operational condition: 0.30 g L^-1 of ZnFe₂O₄/AC(4/1) and 1.5 g L^-1 of PDS, solution pH of 2.74, reaction temperature of 25 °C. The quenching experiments, EPR test, and XPS analysis were employed to reveal the proposed mechanism, which demonstrated that ¹O₂ played a more important role than other reactive species (SO₄^•-, •OH, O₂^•-, and h⁺) in RhB degradation. The generation of ¹O₂ via the two routes was as follows: (i) the in situ formed active oxygen (O^*) reacted with HSO₅^- to produce ¹O₂; (ii) O₂^•- was oxidized by h⁺ to form ¹O₂. After five consecutive cycles, the photodegradation efficiency of RhB by ZnFe₂O₄/AC(4/1) catalyst slightly decreased from 88.52 to 83.92%, indicating the excellent reusability of ZnFe₂O₄/AC(4/1) photocatalyst. As designed, Vis-ZnFe₂O₄/AC-PDS oxidation system can effectively remove RhB from the different real water matrices, and the degradation efficiency of RhB in tap water, river water, and secondary effluent was 78.24%, 79.55%, and 74.53% after 80 min of reaction, respectively.

Fabrication of Cr-ZnFe2O4/S-g-C3N4 Heterojunction Enriched Charge Separation for Sunlight Responsive Photocatalytic Performance and Antibacterial Study

There has been a lot of interest in the manufacture of stable, high-efficiency photocatalysts. In this study, initially Cr doped ZnFe₂O₄ nanoparticles (NPs) were made via surfactant-assisted hydrothermal technique. Then Cr-ZnFe₂O₄ NPs were modified by incorporating S-g-C₃N₄ to enhance their photocatalytic efficiency. The morphological, structural, and bonding aspects were analyzed by XRD, FTIR, and SEM techniques. The photocatalytic efficiency of the functional Cr-ZnFe₂O₄/S-g-C₃N₄ (ZFG) heterostructure photocatalysts was examined against MB under sunlight. The produced ZFG-50 composite has the best photocatalytic performance, which is 2.4 and 3.5 times better than that of ZnFe₂O₄ and S-g-C₃N₄, respectively. Experiments revealed that the enhanced photocatalytic activity of the ZFG nanocomposite was caused by a more effective transfer and separation of photo-induced charges. The ZFG photocatalyst can use sunlight for treating polluted water, and the proposed modification of ZnFe₂O₄ using Cr and S-g-C₃N₄ is efficient, affordable, and environmentally benign. Under visible light, Gram-positive and Gram-negative bacteria were employed to ZFG-50 NCs’ antimicrobial activity. These ZFG-50 NCs also exhibit excellent antibacterial potential.

Activation of peroxymonosulfate by a floating oxygen vacancies - CuFe2O4 photocatalyst under visible light for efficient degradation of sulfamethazine

In this study, expanded perlite supported oxygen vacancies-CuFe₂O₄ (OVs-CFEp) was synthesized via a simple method and utilized as floating catalyst to activate peroxymonosulfate (PMS) for the removal of sulfamethazine (SMT) under visible light irradiation. OVs-CFEp/Vis/PMS synergy presents much superior performance than that of OVs-CFEp/Vis system and OVs-CFEp/PMS system. PMS was efficiently activated by OVs-CFEp at a wide range of pH values, while the degrading rate of SMT was up to 95% in OVs-CFEp/Vis/PMS system. Oxygen vacancies and ·O₂^- accelerated the conversion of Fe(III)/Fe(II) and Cu(I)/Cu(II). The combination of the floating loader boosted light absorption capacity and sufficiently prevented metal ions leaching, which was all beneficial to enhance catalytic performance and recyclability. Besides, the reactive oxygen species were investigated systematically, proving that visible light and OVs-CFEp could activate PMS to produce ·SO₄^-, ·OH, O₂·^-, and ¹O₂ reactive species. Furthermore, based on intermediates identification and Density Functional Theory (DFT) calculation, three types and seven main degradation pathways involving cleavage of bond, SMT molecular rearrangement, and hydroxylation reaction were proposed. So this high photo-absorbing catalyst coupling with advanced oxidation progress was promising for extensive environmental remediation.

Size-dependent visible-light-enhanced Cr(VI) bioreduction by hematite nanoparticles

Light irradiation would affect the electron transfer between dissimilatory metal-reducing bacteria (DMRB) and semiconducting minerals, which may impose a great influence on the biogeochemistry cycle of heavy metals. However, the size effect of semiconducting minerals on the its electron transfer with DMRB and microbial Cr(VI) reduction under visible light irradiation is little known. Herein, the Cr(VI) reduction by Shewanella oneidensis MR-1 (MR-1) was investigated in the presence of hematite nanoparticles with average diameters of 10 nm and 50 nm in dark and under visible light irradiation. It is found that hematite nanoparticles adhered onto MR-1 cells to form the composites, leading to the decrease in surface sites and Zeta potential. Hematite mediated-Cr(VI) bioreduction rate under visible light irradiation was 0.342 h^-1, which is 3.4 folds enhancement compared with that in dark and 4.4 folds compared with the MR-1 alone under visible light irradiation. Decreasing nanoparticle size of hematite from 50 nm to 10 nm promoted the Cr(VI) reduction under visible light irradiation but impeded it in dark. It was deduced that the bioelectrons from MR-1 could promote the separation of photoelectron-hole pairs of light-irradiated hematite, which consequently enhanced the Cr(VI) bioreduction by MR-1-hematite composites. Moreover, mutant strains experiments demonstrated the vital role of c-cytochrome for the conducting network actively established by MR-1 with hematite nanoparticles. Those findings expand the understanding of the electron transfer pathway for enhancing Cr(VI) reduction by hematite-MR-1 composites, and the impact of particle size on the interaction between semiconducting mineral and electroactive bacteria under light irradiation.

TiO2-CeO2/g-C3N4 S-scheme heterostructure composite for enhanced photo-degradation and hydrogen evolution performance with combined experimental and DFT study

The g-C₃N₄/TiO₂ nanocomposites (NCs) are fabricated by optimization of calcination and subsequent hydrothermal technique decorated with CeO₂ nanoparticles (NPs) to build the g-C₃N₄/TiO₂-CeO₂ hybrid NCs. The chemical and surface characterizations of structural, morphological, elemental composition, optical, photo-degradation, HER performance and the DFT computation has been efficiently analyzed. The g-C₃N₄/TiO₂-CeO₂ composite photocatalysts (PCs) exhibit photocatalytic improved performance (∼97 %) for MB aqueous dye related to pristine g-C₃N₄ and g-C₃N₄/TiO₂ composite PCs. The obtained k value of the g-C₃N₄/TiO₂/CeO₂ heterostructure composite PCs has around 0.0262 min^-1 and 6.1, 2.6 and 1.5 times higher than to g-C₃N₄ (0.0043 min^-1), g-C₃N₄/CeO₂ (0.0099 min^-1) and g-C₃N₄/TiO₂ (0.0180 min^-1) PCs respectively. Likewise, the synergistic probable S-scheme charge separation mechanism based on scavengers' tests and other values, which leads to effective separation of photo-excited (e^--h⁺) pairs, whereas high degradation and more H₂O molecules have photo-reduction to H₂. The H₂ evolution reaction (HER) and the electrochemical impedance spectroscopy (EIS) of the as-obtained samples were explored via electrochemical study. This exertion recommends that the rational strategy and building of g-C₃N₄/TiO₂-CeO₂ nano-heterostructures were beneficial for developing visible-light-driven recyclable PCs for ecological refinement.

Zinc ferrite-graphitic carbon nitride nanohybrid for photo-catalysis of the antibiotic ciprofloxacin

2D hybrid sheets of zinc ferrite and graphitic carbon nitride were explored for their application as a UV catalyst for the degradation of ciprofloxacin.

Recent advancements of g-C3N4-based magnetic photocatalysts towards the degradation of organic pollutants: a review

Heterogeneous photocatalysis premised on advanced oxidation processes has witnessed a broad application perspective, including water purification and environmental remediation. In particular, the graphitic carbon nitride (g-C₃N₄), an earth-abundant metal-free conjugated polymer, has acquired extensive application scope and interdisciplinary consideration owing to its outstanding structural and physicochemical properties. However, several issues such as the high recombination rate of the photo-generated electron-hole pairs, smaller specific surface area, and lower electrical conductivity curtail the catalytic efficacy of bulk g-C₃N₄. Another challenging task is separating the catalyst from the reaction medium, limiting their reusability and practical applications. Therefore, several methodologies are adopted strategically to tackle these issues. Attention is being paid, especially to the magnetic nanocomposites (NCs) based catalysts to enhance efficiency and proficient reusability property. This review summarizes the latest progress related to the design and development of magnetic g-C₃N₄-based NCs and their utilization in photocatalytic systems. The usefulness of the semiconductor heterojunctions on the catalytic activity, working mechanism, and degradation of pollutants are discussed in detail. The major challenges and prospects of using magnetic g-C₃N₄-based NCs for photocatalytic applications are highlighted in this report.

Recent advances in graphitic carbon nitride as a catalyst for heterogeneous Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄), an appealing metal-free polymer, has featured in extensive research in heterogeneous Fenton-like reactions owing to its advantages of stable chemical and thermal properties, ease of structural regulation and unique redox ability. However, there are still some gaps in the understanding of the mechanism and fate of g-C₃N₄ and its derivatives in heterogeneous Fenton reaction degradation of contaminants. This paper gives systematic emphasis to the development and progress of g-C₃N₄ and its composites as catalysts in heterogeneous Fenton-like reactions. The main synthesis strategies of g-C₃N₄ composites are discussed, including calcination, hydrothermal method and self-assembly method. Then, the key catalytic properties of g-C₃N₄ in Fenton-like applications, including anchoring nanoparticles, increasing specific surface area and exposed active surface sites, as well as regulating charge transfer reactions, are highlighted. Special emphasis is placed on its multifunctional role in heterogeneous Fenton-like reactions and the mechanisms involved in the activation of hydrogen peroxide, persulfates, and photocatalytic activation of persulfate. Lastly, the existing challenges and possible development direction of g-C₃N₄-coupling Fenton reactions are proposed. It is believed that this paper will bring useful information for the development of graphitic carbon nitride in both laboratory studies and practical applications.

Visible light-conducting polymer nanocomposites as efficient photocatalysts for the treatment of organic pollutants in wastewater

This review compiles recent advances and challenges on photocatalytic treatment of wastewater using nanoparticles, nanocomposites, and polymer nanocomposites as photocatalyst. The review provides an overview of the fundamental principles of photocatalytic treatment along the recent advances on photocatalytic treatment, especially on the modification strategies and operational conditions to enhance treatment efficiency and removal of recalcitrant organic contaminants. The different types of photocatalysts along the key factors influencing their performance are also critically discussed and recommendations for future research are provided.

Mesoporous ferromagnetic manganese ferrite nanoparticles for enhanced visible light mineralization of azoic dye into nontoxic by-products

In this study, a one pot facile synthesis of ferromagnetic manganese ferrite nanoparticles (MnFe₂O₄) was carried out using chemical co-precipitation method for mineralization of azo dye (Congo red (CR)) in aqueous solution under visible light irradiation. The synthesized MnFe₂O₄ nanoparticles were highly crystalline and showed face-centred cubic (FCC) structure with average particle size of 58 ± 4 nm. The BET analysis of the MnFe₂O₄ nanoparticles revealed the mesoporous distribution of material with high surface area can provide large electro active sites and short diffusion paths for the transport of ions which plays a vital role in the photocatalytic degradation of CR. The point of zero charge (pH_PZC) was observed to be 6.7 indicating favourable condition for material-anionic dye interaction. The XPS studies revealed that the large amounts of oxygen vacancies were produced due to the defects in the lattice oxygen. The MnFe₂O₄ nanoparticles mineralised 98.3 ± 0.2% of 50 mg/L CR within 30 min when tested in photocatalytic reactor under 565 nm. The particles were recoverable under the influence of an external magnet after the photocatalytic reaction and were reusable. The recovered nanoparticles showed 96% of CR degradation efficiency even after five cycles of reuse. The by-product analysis with GC-MS indicated mineralization of CR into simple alcohols and acids. The aqueous solution containing mineralised CR was nontoxic to Trigonella foenumgraecum and Vigna mungo seeds and favoured increased germination, plumule and radicle length when compared to untreated CR.

Photocatalytic degradation of cephalexin by g-C3N4/Zn doped Fe3O4 under visible light

In this work, we reported synthesis of a novel magnetically separable g-C₃N₄/Zn doped Fe₃O₄ composite (g-CN/ZnFe) by a simple polyol thermal method. The characteristics of the as-prepared composite was checked by XRD, SEM, TEM, XPS, PL technologies. The optimized weight ratio of g-C₃N₄ and Zn doped Fe₃O₄ was investigated. In addition, the photocatalytic activities of the composite products were checked by degradation of Cephalexin (CEX) under visible light. The results showed that g-CN/ZnFe composite with an added 20% g-C₃N₄ exhibited the highest photocatalytic activity for cephalexin under visible light irradiation. The improved photocatalytic activity of 20% g-CN/ZnFe can be ascribed to the low combination rate of photoinduced electron/hole pairs. Especially, g-CN/ZnFe can be recovered easily by using an external magnetic field and has the high stability after six runs. These properties of the g-CN/ZnFe as-prepared composite could be a promising photocatalyst for the degradation of pharmaceutical contaminants.

Solar Light-Irradiated Photocatalytic Degradation of Model Dyes and Industrial Dyes by a Magnetic CoFe2O4-gC3N4 S-Scheme Heterojunction Photocatalyst

Magnetic CoFe₂O₄-gC₃N₄ nanocomposites were successfully synthesized, and their photocatalytic activities toward the decomposition of model synthetic dyes (e.g., methylene blue, methyl orange, and Congo red) in the presence of H₂O₂ were evaluated under simulated solar light irradiation. The 50CoFe₂O₄-50gC₃N₄ nanocomposite exhibited the highest catalytic activity. The catalytic activity of 50CoFe₂O₄-50gC₃N₄ toward the photodegradation of some industrially used dyes (such as Drimaren Turquoise CL-B p, Drimaren Yellow CL-2R p, and Drimaren Red CL-5B p) was also examined, and the catalyst exhibited its capability to decompose the industrial dyes completely. An aqueous mixture of these dyes was prepared to mimic the dye-containing wastewater, which was fully photodegraded within 30 min. 50CoFe₂O₄-50gC₃N₄ also exhibited facile magnetic separability from the reaction mixture after the accomplishment of photocatalysis reaction and stable performance after five cycles. The high photocatalytic efficiency to degrade several dyes, including dyes used in textile industries, under solar light irradiation makes 50CoFe₂O₄-50gC₃N₄ a promising photocatalyst for the treatment of dye-containing wastewater discharged from industries.

Facile preparation of iron oxide doped Fe-MOFs-MW as robust peroxydisulfate catalyst for emerging pollutants degradation

A novel catalyst (Fe-MOFs-MW) was facilely synthesized under microwave-assisted with NaOH as modulator for activating peroxydisulfate (PDS). The accelerated nucleation process was confirmed by Johnson-Mehl-Avrami (JMA) model. There were abundant reactive sites on prepared Fe-MOFs-MW while maintaining high Space-Time-Yield value up to 2300 kg/m³·d. Degradation performance of Fe-MOFs-MW as PDS catalyst on sulfamethoxazole (SMX) removal was evaluated. Results indicated that Fe-MOFs-MW with more Fe element anchored (10%) exhibited excellent catalytic capacity for PDS. Besides, the fantastic stability and reusability were confirmed through recycle experiment. After recycled for 4 times, the removal efficiency of SMX and TOC was 88% and 31.3% compared to 98% and 38% without recycling, respectively. An accurate prediction model on the degradation effect with water matrices coexisted was established by response surface methodology (RSM) method. Moreover, SO₄^·-, O₂^·- and ·OH were confirmed as the main reactive species through chemical quenching and EPR tests. The mechanism of Fe-MOFs-MW/PDS process mainly based on electron circulation theory was proposed. As the robust PDS catalyst, facile prepared Fe-MOFs-MW was promising in the treatment of emerging pollutants.

Identifying Iron-Bearing Nanoparticle Precursor for Thermal Transformation into the Highly Active Hematite Photo-Fenton Catalyst

The hematite photo-Fenton catalysis has attracted increasing attention because it offers strong oxidation of organic pollutants under visible light at neutral pH. In the present work, aqueous synthesis of hematite photo-Fenton catalysts with high activity is demonstrated. We compare photo-Fenton activity for hematite obtained by hydrolyzation at 60 °C or by a thermally induced transformation from iron-bearing nanoparticles, such as amorphous iron oxyhydroxide or goethite. A link between their structure and visible light photo-Fenton reactivity is established. The highest activity was observed for hematite obtained from goethite nanowires due to oblong platelet-like structure, high surface area and the presence of nanopores.

Hybridized 2D Nanomaterials Toward Highly Efficient Photocatalysis for Degrading Pollutants: Current Status and Future Perspectives

Organic pollutants including industrial dyes and chemicals and agricultural waste have become a major environmental issue in recent years. As an alternative to simple adsorption, photocatalytic decontamination is an efficient and energy-saving technology to eliminate these pollutants from water environment, utilizing the energy of external light, and unique function of photocatalysts. Having a large specific surface area, numerous active sites, and varied band structures, 2D nanosheets have exhibited promising applications as an efficient photocatalyst for degrading organic pollutants, particularly hybridization with other functional components. The novel hybridization of 2D nanomaterials with various functional species is summarized systematically with emphasis on their enhanced photocatalytic activities and outstanding performances in environmental remediation. First, the mechanism of photocatalytic degradation is given for discussing the advantages/shortcomings of regular 2D materials and identifying the importance of constructing hybrid 2D photocatalysts. An overview of several types of intensively investigated 2D nanomaterials (i.e., graphene, g-C₃ N₄ , MoS₂ , WO₃ , Bi₂ O₃ , and BiOX) is then given to indicate their hybridized methodologies, synergistic effect, and improved applications in decontamination of organic dyes and other pollutants. Finally, future research directions are rationally suggested based on the current challenges.

Influence of Different Preparation Methods of Silver-Modified Carbon Nitride on the Photocatalytic Activity towards Indigo Carmine Dye

Silver nanoparticles (Ag NPs) may increase photocatalytic activity of widely used photocatalysts under visible light irradiation and decrease recombination probability of photogenerated electrons and holes. In this paper, we report three different preparation methods to obtain Ag/C3N4 nanocomposites. We used Ag nanoparticles a) synthesized by using sodium borohydride, b) synthesized by using UV 365 nm LED and c) already prepared and purchased from company nanoIron. The Ag NPs have been loaded on thermally exfoliated carbon nitride with the aim to form 5 wt.% Ag/C3N4 nanocomposites. Further their photocatalytic activity was tested towards Indigo carmine dye (IC) under 416 nm LED. The results show that method a) loaded different amount and size of Ag NPs on the surface of C3N4, b) changed optoelectronic behaviors of nanocomposites and c) significantly influenced their photocatalytic activity.

Ag as Cocatalyst and Electron-Hole Medium in CeO2 QDs/Ag/Ag2Se Z-scheme Heterojunction Enhanced the Photo-Electrocatalytic Properties of the Photoelectrode

A recyclable photoelectrode with high degradation capability for organic pollutants is crucial for environmental protection and, in this work, a novel CeO₂ quantum dot (QDs)/Ag₂Se Z-scheme photoelectrode boasting increased visible light absorption and fast separation and transfer of photo-induced carriers is prepared and demonstrated. A higher voltage increases the photocurrent and 95.8% of tetracycline (TC) is degraded by 10% CeO₂ QDs/Ag₂Se in 75 minutes. The degradation rate is superior to that achieved by photocatalysis (92.3% of TC in 90 min) or electrocatalysis (27.7% of TC in 90 min). Oxygen vacancies on the CeO₂ QDs advance the separation and transfer of photogenerated carriers at the interfacial region. Free radical capture tests demonstrate that •O₂⁻, •OH, and h⁺ are the principal active substances and, by also considering the bandgaps of CeO₂ QDs and Ag₂Se, the photocatalytic mechanism of CeO₂ QDs/Ag₂Se abides by the Z-scheme rather than the traditional heterojunction scheme. A small amount of metallic Ag formed in the photocatalysis process can form a high-speed charge transfer nano channel, which can greatly inhibit the photogenerated carrier recombination, improve the photocatalytic performance, and help form a steady Z-scheme photocatalysis system. This study would lay a foundation for the design of a Z-scheme solar photocatalytic system.

Magnetic Nanoparticles for Photocatalytic Ozonation of Organic Pollutants

Magnetic nanoparticles (MNP) composed of iron oxide (or other metal–FeO cores) coated with carbon produced by chemical vapour decomposition (CVD) were used in the photocatalytic ozonation of oxamic acid (OMA) which we selected as a model pollutant. The incorporation of Ag and Cu on FeO enhanced the efficiency of the process. The carbon phase significantly increased the photocatalytic activity towards the conversion of OMA. As for the synthesis process, raising the temperature of CVD improved the performance of the produced photocatalysts. The obtained results suggested that the carbon phase is directly related to high catalytic activity. The most active photocatalyst (C@FeO_CVD850) was used in the removal of other compounds (dyes, industrial pollutants and herbicides) from water and high mineralization levels were attained. This material was also revealed to be stable during reutilisation.

A magnetically separable plate-like cadmium titanate-copper ferrite nanocomposite with enhanced visible-light photocatalytic degradation performance for organic contaminants

A novel magnetic cadmium titanate-copper ferrite (CdTiO3/CuFe2O4) nanocomposite, in which spherical CuFe2O4 nanoparticles were loaded onto the surface of CdTiO3 nanoplates, was successfully synthesized via a sol-gel hydrothermal route at 180 °C. The structure, morphology, magnetic and optical properties of the as-prepared nanocomposite were respectively characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) spectroscopy, transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) surface area analysis, UV-visible diffuse reflectance spectroscopy (DRS), vibrating sample magnetometry (VSM) and photoluminescence (PL) spectroscopy. The photocatalytic activity of this novel CdTiO3-based magnetic nanocomposite was investigated for the degradation of organic dye pollutants such as methylene blue (MB), rhodamine B (RhB), and methyl orange (MO) in the presence of H2O2 under visible light irradiation. The results showed that the photocatalyst completely degraded three dyes within 90-100 min. Compared with pure CdTiO3 and CuFe2O4, the heterogeneous CdTiO3/CuFe2O4 nanocomposite exhibited significantly enhanced photocatalytic efficiency. On the basis of the results of the OH trapping and photoluminescence (PL) experiments, the enhanced photocatalytic performance was mainly ascribed to the efficient separation of photo-induced electron-hole pairs and the formation of highly active hydroxyl radicals (OH) species in the CdTiO3/CuFe2O4 photocatalytic oxidation system. The PL measurements of the CdTiO3/CuFe2O4 nanocomposite also indicated an enhanced separation of photo-induced electron-hole pairs. Moreover, the nanocomposite could be easily separated and recycled from contaminant solution using a magnet without a decrease in their photocatalytic activity due to their good magnetic separation performance and excellent chemical stability. Based on these findings, CdTiO3/CuFe2O4 nanocomposite could be a promising visible-light-driven magnetic photocatalyst for converting solar energy to chemical energy for environmental remediation.

Photocatalytic Simultaneous Removal of Nitrite and Ammonia via a Zinc Ferrite/Activated Carbon Hybrid Catalyst under UV-Visible Irradiation

Nitrite and ammonia often coexist in waters. Thus, it is very significant to develop a photocatalytic process for the simultaneous removal of nitrite and ammonia. Herein, zinc ferrite/activated carbon (ZnFe₂O₄/AC) was synthesized and characterized by X-ray diffraction spectroscopy, transmission electron microscopy, Raman spectroscopy, and ultraviolet-visible diffuse reflectance spectroscopy. The valence band level of ZnFe₂O₄ was measured by X-ray photoelectron spectroscopy-valence band spectroscopy, and first-principles calculation was performed to confirm the band structure of ZnFe₂O₄. The as-synthesized ZnFe₂O₄/AC species functioned as a photocatalyst to simultaneously remove nitrite and ammonia under anaerobic conditions upon UV-visible light irradiation at the first stage. The results indicated that an average removal ratio of 92.7% with ±0.2% error for nitrite degradation for three runs was achieved in 50.0 mg/L nitrite + 100.0 mg/L ammonia solution with pH 9.5 under anaerobic conditions for 3 h at this stage; simultaneously, the removal ratio of 64.0% with ±0.2% error for ammonia was also achieved. At the second stage, oxygen gas was bubbled in the reactor to photocatalytically eliminate residual ammonia under aerobic conditions upon continuous irradiation. The results demonstrated that the removal ratios for nitrite, ammonia, and total nitrogen reached to 92.0, 90.0, and 90.2% at 12th hour, respectively, and the product released during photocatalysis is N₂ gas, detected by gas chromatography, fulfilling the simultaneous removal of nitrite and ammonia. The reaction mechanism was exploited.

Transformation pathway and degradation mechanism of methylene blue through β-FeOOH@GO catalyzed photo-Fenton-like system

To enhance the catalytic and separation properties of akaganéite nanoparticles, rice spike-like akaganéite impregnated graphene oxide (β-FeOOH@GO) nanocomposite was fabricated through facile hydrolysis. The apparent first-order decolorization rate of methylene blue (MB) in β-FeOOH@GO catalyzed photo Fenton-like system was 0.6322 min^-1 about 3 folds that of prinstine β-FeOOH nanoparticles. The degradation intermediates of MB adsorbed on the solid surface of β-FeOOH@GO were comprehensively identified with time of flight-secondary ion mass spectroscopy (TOF-SIMS) for the first time. Newly identified sulfoxide intermediates, sulphone intermediates and desulfurization intermediates and N-demethylaton or dedimethamine intermediates were reported for the first time. The proposed degradation pathway of MB predominantly proceeded with the rupture of phenothiazine rings oxided with OH, and singlet oxygen (¹O₂) radicals, which fully extending the reaction pathways proposed in previous work in literature. The enhanced catalytic activity of β-FeOOH@GO was ascribed to the formation of heterojunctions confirmed by the presence of FeOC chemical bonds through X-ray photoelectron spectroscopy (XPS). The complete elimination of MB and its acute toxicity to Luminous bacteria showed that β-FeOOH@GO would be served as a highly efficient Fenton-like catalyst for treatment of high concentration refractory organic contaminant.

A novel combination of bioelectrochemical system with peroxymonosulfate oxidation for enhanced azo dye degradation and MnFe2O4 catalyst regeneration

Advanced oxidation process (AOP) based on peroxymonosulfate (PMS) activation was established in microbial fuel cell (MFC) system with MnFe₂O₄ cathode (MFC-MnFe₂O₄/PMS) aimed to enhance azo dye degradation and catalyst regeneration. The effects of loading amount of MnFe₂O₄ catalyst, applied voltage, catholyte pH and PMS dosage on the degradation of Orange II were investigated. The stability of the MnFe₂O₄ cathode for successive PMS activation was also evaluated. The degradation of Orange was accelerated in the MFC-MnFe₂O₄/PMS with apparent degradation rate constant increased to 1.8 times of that in the MnFe₂O₄/PMS control. A nearly complete removal of Orange II (100 mg L^-1) was attained in the MFC-MnFe₂O₄/PMS under the optimum conditions of 2 mM PMS, 10 mg cm^-2 MnFe₂O₄ loading, pH 7-8 and 480 min reaction time. MFC driven also extended the longevity of the MnFe₂O₄ catalyst for PMS activation due to the in-situ regeneration of ≡Mn²⁺ and ≡Fe²⁺ through accepting electrons from the cathode, and over 80% of Orange II was still removed in the 7^th run. Additionally, the MFC-MnFe₂O₄/PMS system could recover electricity during Orange II degradation with a maximum power density of 206.2 ± 3.1 mW m^-2. PMS activation by MnFe₂O₄ was the primary pathway for SO₄^- generation, and SO₄^- based oxidation was the primary mechanism for Orange II degradation. MFCs driven coupled with PMS activated AOP systems provides a novel strategy for efficient and persistent azo dye degradation.