Buoyant Photocatalyst with Greatly Enhanced Visible-Light Activity Prepared through a Low Temperature Hydrothermal Method

One-Step Photochemical Preparation of CdS/Poly(MMA-co-MAA) Composite with Enhanced Photocatalytic Activity

This paper presents a one-step photochemical method for the preparation of CdS/Poly(MMA-co-MAA) composite photocatalyst, based on the concept of simultaneous photocatalytic polymerization of organic monomers during UV-light induced formation of CdS. The preparation is carried out in an aqueous solution of Na2S2O3, CdSO4, methyl methacrylate (MMA) and methacrylic acid (MAA), under a UV lamp. The continuously formed CdS particles with photocatalytic activity act the role of initiator to directly initiate the copolymerization of MMA and MAA, resulting in the in situ formation of the composite and full contact of the CdS particles with the oxygen-containing groups in the polymer. Taking the photocatalytic degradation of methylene blue as a case study, the composite exhibited significantly higher activity under simulated solar light compared to the pure CdS. By analysis on various data, the enhanced photocatalytic activity is attributed to the enhanced visible light absorption, and especially the high electron-hole separation efficiency caused by the electrostatic interaction between photogenerated holes and carbonyl oxygen atoms with negatively charged features. Furthermore, the composite displays excellent sunlight activity and recyclability, suggesting its potential for practical applications. Such a one-step construction strategy relying only on photo-energy is green, low-cost and promising in obtaining high-performance semiconductor/polymer composite photocatalysts.

Critical review on modified floating photocatalysts for emerging contaminants removal from landscape water: problems, methods and mechanism

Due to the disorderly discharge in modern production and daily life of people, emerging contaminants(ECs) began to appear in landscape water, and have become a key public concern. Because of the unique characteristics of landscape water, it is difficult to efficiently remove ECs either by natural purification or by traditional large-scale sewage treatment facilities. The ideal purification method is to remove them while maintaining a beautiful environment. Possessing the feature of low-density, floating photocatalysts could harvest sufficient light on the surface of the water for photocatalytic degradation, which may be an important supplement for ECs treatment in landscape water. This paper gave a review related to floating photocatalysts and proposed an idea of combining floating photocatalysts to construct bionic photocatalytic materials for contaminative landscape water treatment. Six types of common floating substrates and corresponding applications for floating photocatalysts were concluded in this paper, and the main problem leading to the low efficiency of photocatalysts and three corresponding three improvement strategies were discussed. Besides, the modification mechanisms of photocatalysts were discussed thoroughly. On this basis, the engineering application prospects of bionic photocatalytic materials were proposed to remove ECs in landscape water.

Influence of Plasma Treatment Parameters on the Structural-Phase Composition, Hardness, Moisture-Resistance, and Raman-Enhancement Properties of Nitrogen-Containing Titanium Dioxide

The paper shows, for the first time, the prospects of treatment with a quasi-equilibrium low-temperature nitrogen plasma in an open atmosphere for the formation of super-hard, super-hydrophobic TiN/TiO₂ composite coatings with pronounced Raman-enhancement properties. X-ray diffractometry (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and Raman spectroscopy, as well as the analysis of hardness and moisture-resistance properties, are used as analytical research methods. During plasma treatment of titanium films on sapphire with a mass average temperature of 4-6 kK, an X-ray amorphous hydrophilic titanium oxide film with a low nitrogen content is formed. The nitrogen content in titanium oxide films increases with increasing treatment temperature up to 6-7 kK. In this case, an X-ray amorphous hydrophobic film is formed. With a further increase in temperature to 7-10 kK, a TiN/TiO₂ composite structure based on polycrystalline rutile is formed with increased hydrophobicity and pronounced Raman enhancement properties due to the effective excitation of surface plasmon polaritons. The presence of the crystalline phase increases the dephasing time, which determines the quality of the resonance and the achievable amplification of the electromagnetic field near the TiN inclusions. All treated films on sapphire have a super-hardness above 25 GPa (Vickers hardness test) due to high grain size, the presence of nitrogen-containing inclusions concentrated along grain boundaries, and compressive stresses.

Effective Removal of Methylene Blue by Surface Alteration of TiO2 with Ficus Carica Leaf Extract under Visible Light

The present study describes the use of a leaf extract from Ficus carica as a source of natural antioxidants for the surface alteration of bulk titanium dioxide (TiO₂) in two steps. First, the hydro-thermal treatment of the bulk TiO₂ material was carried out and followed by thermal annealing at 300 °C for 3 h in air. The role of the leaf extract of Ficus carica on the performance of the bulk TiO₂ material for the removal of methylene blue (MB) was also studied. Various analytical techniques such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) were used to explore the crystalline structure, morphology, and composition. The bulk TiO₂ material after the leaf-extract treatment exhibited mixed anatase and rutile phases, a flower-like morphology, and Ti, O, and C were its main elements. The average crystallite size was also calculated, and the obtained values for the bulk TiO₂ material, 18.11 nm, and the treated bulk TiO₂ material with various amounts, 5, 10, and 15 mL, of leaf extract were 16.4, 13.16, and 10.29 nm respectively. Moreover, Fourier-transform infrared spectroscopy validated the typical metal-oxygen bonds and strengthened the XRD results. The bulk TiO₂ material chemically treated with Ficus carica has shown outstanding activity towards the degradation of MB under sunlight. The 15 mL of Ficus carica extract significantly enhanced the photocatalytic activity of the bulk TiO₂ material towards the degradation of MB. The dye degradation efficiency was found to be 98.8%, which was experimentally proven by the Fourier Transform Infrared spectroscopoyy (FTIR) analysis. The obtained performance of the bulk TiO₂ material with Ficus carica revealed excellent surface modifying properties for poorly-performing photocatalysts towards the degradation of synthetic dyes when used in their pristine form. The presented approach suggests that Ficus carica could be of great interest for tuning the surface properties of materials, either in the form of nano-size or bulk-phase in a particular application.

Functional Supported ZnO/Bi2MoO6 Heterojunction Photocatalysts with 3D-Printed Fractal Polymer Substrates and Produced by Innovative Plasma-Based Immobilization Methods

Inorganic photocatalysts became an essential and powerful tool for the remediation of polluted water. However, important limitations of photocatalysts in their colloidal form, especially nanosized, remain. For instance, their separation from water after use and recovery, which can be particularly demanding, time- and energy-wise. Considering such aspects, supported catalysts bear significant advantages. However, efforts still have to be made to develop processes that allow the permanent and efficient immobilization of inorganic photocatalysts in sustainable conditions, in order to maintain the advantages of supported catalysts over colloidal ones. Herein, we report the use of an aqueous-phase plasma-aided grafting (APPAG) process to produce functional and efficient hybrid photocatalysts. More specifically, based on cold plasma discharge (CPD), ZnO/Bi₂MoO₆ heterojunctions were permanently immobilized on polymer supports generated by 3D-printing, with fractal-inspired designs. Three different approaches of the APPAG process have been successfully used for the immobilization of the inorganic phase, that is core-shell-assisted direct grafting, indirect grafting and in situ complexation-assisted precipitation (ISCAP). Noticeably, the latter technique has never been reported before to our knowledge. These three immobilization routes rely on different strategies and yield to distinct morphological specificities, but all allow using mild synthesis conditions and producing stable, active, permanently immobilized coatings of photocatalysts. Regarding the preparation of the organic supports, two sorts of additive manufacturing (AM) technologies were employed, namely fused-deposition modeling (FDM) and liquid crystal diode (LCD)-based SLA (stereolithography). The use of fractal geometries combined with AM permits the production of supports with relatively high surface areas, in a single processing step. Overall, the three plasma-based immobilization methods revealed to be efficient and the performance of the different hybrid photocatalysts have later been assessed through the photodegradation of Rhodamine B dye under simulated sunlight irradiation and visible light only, with promising results.

Titanium Dioxide Microscale and Macroscale Structures: A Mini-Review

Titanium dioxide nanoparticles (TiO2 NPs) have some limitations, such as their low surface area, high bandgap energy, and low recycling ability. To overcome these limitations, TiO2 can be prepared in microscale/macroscale structures. TiO2 microscale structures, in comparison with TiO2 nanopowder, have higher surface areas, more tunable pore structures, and better top photocatalytic activity. In contrast, for TiO2 macroscale structures, although the surface area is lower than TiO2 nanopowder in many cases, they still achieve similar or better photocatalytic performance due to their unique properties. Moreover, both TiO2 microscale and macroscale structures can be easily recovered from reaction media. The difference between these two types of TiO2 structures is a function not only of size but also of the preparation process. Every type of TiO2 structure has its own advantages and disadvantages, as will be discussed further in the following pages. Future perspectives on this research field also will be discussed.

Floating TiO2 photocatalyst for efficient inactivation of E. coli and decomposition of methylene blue solution

The anatase phase TiO₂ films with nanocrystalline structure were successfully deposited on a water-floating non-expanded polystyrene (PS) beads via magnetron sputtering. The combination of UVB light and PS beads with TiO₂ film was used for decomposition of methylene blue as well as inactivation tests for intact and EDTA-treated Escherichia coli bacteria. Crystal structure, elemental composition, elemental mapping, surface morphology and chemical bonds of TiO₂ film were investigated. E. coli inactivation experiments showed that such floating photocatalyst could destroy >90% bacteria in 45 min under UVB irradiation. Results demonstrated that combination of TiO₂ and UVB light leads to disruption of the outer membrane which causes effective inactivation of E. coli bacteria.

Synthesis, characterization, and photocatalytic activity of silver and zinc co-doped TiO2 nanoparticle for photodegradation of methyl orange dye in aqueous solution

In this study, TiO2 nanocrystals, 1 mol% Ag-doped TiO2, and 1 mol% Ag and 0.6 mol% Zn co-doped TiO2 powders were synthesized by the sol–gel route. Their photocatalytic activities on methyl orange dye under visible irradiation were investigated. The powders were characterized by X-ray diffraction (XRD), UV–visible spectroscopy (UV–vis), Brunauer–Emmett–Teller (BET), and Fourier transform infrared spectroscopy (FTIR). The XRD results revealed the presence of a rutile phase with an average crystallite size of 9 and 11 nm. The UV–vis spectra showed a red-shift towards a longer wavelength with the corresponding decrease in band gap from 2.9 to 2.5 eV. The BET surface areas of the nanoparticles ranged from 4.7 to 11.8 m2 g−1 with an average pore size between 18.9 and 56.6 nm. The Ag-doped TiO2 has the largest surface area of 11.8 m2 g−1, whereas the Ag–Zn co-doped TiO2 was found to have the highest pore size and volume. The absorption bands at 750–500 cm−1 were attributed to the –O–Ti–O– bond in the TiO2 lattice. The photocatalytic efficiency was highest at an optimum pH of 4.1 for Ag–Zn co-doped TiO2. The results confirmed that Ag-doped and Ag–Zn co-doped TiO2 were more effective than pure TiO2. The kinetic data were fitted into a pseudo first-order equation using a Langmuir–Hinshelwood kinetic model.

Photocatalytic Microporous Membrane against the Increasing Problem of Water Emerging Pollutants

Emerging pollutants are an essential class of recalcitrant contaminants that are not eliminated from water after conventional treatment. Here, a photocatalytic microporous membrane based on polyvinylidene difluoride-co-trifluoroethylene (PVDF-TrFE) with immobilised TiO₂ nanoparticles, prepared by solvent casting, was tested against representative emerging pollutants. The structure and composition of these polymeric membranes were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier-transform infrared spectroscopy, porosimetry, and contact angle goniometry. The nanocomposites exhibited a porous structure with a uniform distribution of TiO₂ nanoparticles. The addition of TiO₂ did not change the structure of the polymeric matrix; however, it increased the wettability of the nanocomposite. The nanocomposites degraded 99% of methylene blue (MB), 95% of ciprofloxacin (CIP), and 48% of ibuprofen (IBP). The microporous nanocomposite exhibited no photocatalytic efficiency loss after four use cycles, corresponding to 20 h of UV irradiation. The reusability of this system confirms the promising nature of polymer nanocomposites as the basis for cost-effective and scalable treatments of emerging pollutants.

Modeling the formation of TiO2 ultra-small nanoparticles

The structures of TiO₂ ultra-small nanoparticles (USNPs) at the atomistic level have been predicted because of their potential importance in catalytic, environmental, biological and energy applications. Low energy (TiO₂)_n clusters and USNPs (n up to 80 at the B3LYP/DZVP2 level, and up to 384 at the PM6 level) were found using a novel bottom-up global optimization approach that is based on all-atom real-space calculations. These structures include USNPs that belong to 1-D, 2-D and 3-D USNP series where all the members share the same fragment types and local translational symmetries. Most of the metastable 2-D and 3-D USNPs contain tubular building blocks similar to the 1-D USNPs. The 3-D USNPs that resemble the bulk anatase are predicted to be energetically favorable structures for 64 ≤ n ≤ 384. A fragment-based model was developed to relate the energy with geometry for the 1-D, 2-D and 3-D USNPs. Surface energy densities were predicted for surface fragments at the different positions of the USNPs using this new model. Based on the predicted surface energy densities and the partial density of states, the most catalytically active sites for the anatase-like 3-D USNPs were predicted to be the kink sites on Face-x surfaces consisting of an octahedral-Ti, the step (edge) sites between the Face-x and Face-y surfaces consisting of a square pyramidal-Ti (on Face-x), and the step sites consisting of a trigonal bipyramidal Ti on the Face-y surfaces.

Biological treatment with fungi of olive mill wastewater pre-treated by photocatalytic oxidation with nanomaterials

Olive mill wastewater (OMW) still is a major environmental problem due to its high chemical oxygen demand (COD) and total phenolic content (TPC), contributing for the high toxicity and recalcitrant nature. Several attempts have been made for developing more efficient treatment processes, but no chemical or biological approaches were found to be totally effective, especially in terms of toxicity reduction. In this context, the main purpose of this study was to investigate the treatability of OMW by the combination of photocatalytic oxidation, using two nanomaterials as catalysts (TiO2 and Fe2O3), with biological degradation by fungi (Pleurotus sajor caju and Phanerochaete chrysosporium). Photocatalytic oxidation was carried out using different systems, nano-TiO2/UV, nano-Fe2O3/UV, nano-TiO2/H2O2/UV and nano-Fe2O3/H2O2/UV. The effectiveness of the treatment was assessed through color (465nm), aromatics (270nm), COD and TPC reductions, as well as by the decrease in toxicity using the bacterium Vibrio fischeri. The chemical treatment with the system nano-TiO2/H2O2/UV promoted 43%, 14%, 38% and 31% reductions in color, aromatics content, COD and TPC, respectively. However no toxicity reduction was observed. The combination with a biological treatment increased the reduction of COD and TPC as well as a reduction in toxicity. The treatment with P. chrysosporium promoted the highest reduction in toxicity, but P. sajor caju was responsible for the best reduction in COD and TPC. However, the biological treatment was more effective when no hydrogen peroxide was used in the pre-treatment.

Conjugated polymer/nanocrystal nanocomposites for renewable energy applications in photovoltaics and photocatalysis

Conjugated polymer/nanocrystal composites have attracted much attention for use in renewable energy applications because of their versatile and synergistic optical and electronic properties. Upon absorbing photons, charge separation occurs in the nanocrystals, generating electrons and holes for photocurrent flow or reduction/oxidation (redox) reactions under proper conditions. Incorporating these nanocrystals into conjugated polymers can complement the visible light absorption range of the polymers for photovoltaics applications or allow the polymers to sensitize or immobilize the nanocrystals for photocatalysis. Here, the current developments of conjugated polymer/nanocrystal nanocomposites for bulk heterojunction-type photovoltaics incorporating Cd- and Pb-based nanocrystals or quantum dots are reviewed. The effects of manipulating the organic ligands and the concentration of the nanocrystal precursor, critical factors that affect the shape and aggregation of the nanocrystals, are also discussed. In the conclusion, the mechanisms through which conjugated polymers can sensitize semiconductor nanocrystals (TiO2 , ZnO) to ensure efficient charge separation, as well as how they can support immobilized nanocrystals for use in photocatalysis, are addressed.

Facile synthesis of hierarchical porous TiO(2) ceramics with enhanced photocatalytic performance for micropolluted pesticide degradation

In this research, hierarchical porous TiO2 ceramics were successfully synthesized through a camphene-based freeze-drying route. The well-dispersed TiO2 slurries were first frozen and dried at room temperature, followed by high-temperature sintering. The ceramics were analyzed by X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Results indicated that the obtained TiO2 ceramics could inhibit undesirable anatase-to-rutile phase transformation and grain growth even at temperatures as high as 800 °C. In this experiment, optimal compressive strength and porosity of the TiO2 ceramics were produced with the initial TiO2 slurry content of ∼15 wt %. The resultant TiO2 ceramics performed excellently in the photodegradation of atrazine and thiobencarb, and the total organic carbon removal efficiency was up to 95.7% and 96.7%, respectively. More importantly, the TiO2 ceramics were easily recyclable. No obvious changes of the photocatalytic performance were observed after six cycles. Furthermore, the ceramics also effectively degraded other pesticides such as dimethoate, lindane, dipterex, malathion, and bentazone. These hierarchical porous TiO2 ceramics have potential applications in environmental cleanup.

Synthesis of magnetic rattle-type nanostructures for use in water treatment

A hydrothermal technique to simultaneously remove a SiO2 template and crystallize a TiO2 outer layer was used to create magnetically separable, hollow rattle-type nanoparticles consisting of a magnetic Fe3O4 core contained within a hollow TiO2 shell. Fe3O4 cores approximately 240 nm in diameter were synthesized, subsequently coated by SiO2 and finally coated with TiO2. This was followed by a hydrothermal treatment to selectively etch the silica, resulting in rattle-type particles with a final outer shell diameter of approximately 390 nm. The product of hydrothermal treatment were rattle-type particles with increased crystallinity and a 68% increase in surface area. Characterization confirmed the ability to etch a hard SiO2 template through use of a simple and benign thermal treatment with pure water, while simultaneously introducing a crystalline phase into the TiO2 active layer. The potential of the particles to be employed as a catalyst in UV induced advanced water treatment for removal of organic contaminants was evaluated through a colorimetric photocatalytic degradation assay using methylene blue as a model contaminant. The ability of the particles to be magnetically separated from solution after treatment and recycled for consecutive treatment cycles was then demonstrated. This technique for selectively removing a hard SiO2 template while simultaneously crystallizing a TiO2 shell avoids the use of hazardous chemical etchants or complex processing, rendering the synthesis of hierarchical, multimaterial, hollow, porous rattle-type particles a simple, attractive, and environmentally friendly "one-pot" technique for potential industrial application.

TiO₂-coated carbon nanotube-silicon solar cells with efficiency of 15%

Combining carbon nanotubes (CNTs), graphene or conducting polymers with conventional silicon wafers leads to promising solar cell architectures with rapidly improved power conversion efficiency until recently. Here, we report CNT-Si junction solar cells with efficiencies reaching 15% by coating a TiO₂ antireflection layer and doping CNTs with oxidative chemicals, under air mass (AM 1.5) illumination at a calibrated intensity of 100 mW/cm² and an active device area of 15 mm². The TiO₂ layer significantly inhibits light reflectance from the Si surface, resulting in much enhanced short-circuit current (by 30%) and external quantum efficiency. Our method is simple, well-controlled, and very effective in boosting the performance of CNT-Si solar cells.

Visible light photocatalytic degradation of RhB by polymer-CdS nanocomposites: role of the host functional groups

Surface groups of the host polystyrene beads play an important role in the properties of the polymer-based nano-CdS composites in terms of the distribution, dispersion, crystal structure, pH-dependent stability of nano-CdS, and thereafter affect their photocatalytic activity. Surface modification of the host materials can be taken as an effective and general approach to mediate the structure and properties of the nanocomposite materials.