The effect of macromolecular architecture in nanomaterials: a comparison of site isolation in porphyrin core dendrimers and their isomeric linear analogues

Advancing elastomer performance with dynamic bond networks in polymer-grafted single-chain nanoparticles: a molecular dynamics exploration

This research introduces a method to enhance the mechanical properties of elastomers by grafting polymer chains onto single-chain flexible nanoparticles (SCNPs) and incorporating dynamic functional groups. Drawing on developments in grafting polymers onto hard nanoparticle fillers, this method employs the distinct flexibility of SCNPs to diminish heterogeneity and enhance core size control. We use molecular dynamics (MD) simulations for a mesoscale analysis of structural properties, particularly the effects of dynamic functional group quantities and their distribution. The findings demonstrate that increased quantities of functional groups are correlated with enhanced mechanical strength and toughness, showing improved stress-strain responses and energy dissipation capabilities. Moreover, the uniformity in the distribution of these functional groups is crucial, promoting a more cohesive and stable dynamic bonding network. The insights gained from MD simulations not only advance our understanding of the microstructural control necessary for optimizing macroscopic properties, but also provide valuable guidance for the design and engineering of advanced polymer nanocomposites, thereby enhancing the material performance through strategic molecular design.

Giant Star-shaped meso-substituted Fluorescent Porphyrins with Fluorenyl-containing Arms Designed for Two-photon Oxygen Photosensitization

In the continuation of previous studies on carbon-rich meso-tetraarylporphyrins featuring 2,7-fluorene units at their periphery, the effect of changing the peripheral dendritic arms for linear arms on their oxygen-photosensitizing ability, their fluorescence and their two-photon absorption (2PA) properties is now analyzed. Thus, starburst porphyrins possessing up to twenty conjugated fluorenyl units were isolated and studied. More precisely, a series of five new free-base porphyrins featuring fully conjugated arms incorporating an increasing number of fluorenyl groups connected via 1,2-alkenyl spacers were synthesized, along with their Zn(II) complexes. Upon excitation in the arm-centred π-π* absorption band, an efficient energy transfer takes place from the peripheral fluorenyl units to the central porphyrin core, leading to intense red-light emission and oxygen photosensitization by the latter. More interestingly, while the linear optical properties of these porphyrins were only slightly improved compared to those of their dendrimer analogues for photodynamic therapy (PDT) or fluorescence imaging, their 2PA cross-sections were much more significantly boosted, evidencing the key role played by different structures on nonlinear optical properties. Finally, by comparison with other porphyrin-based two-photon photosensitizers reported in the literature, we show that these new "semi-disconnected" starburst systems exhibit a remarkable trade-off between intrinsic 2PA, fluorescence and oxygen photosensitization.

Thermally Stable and Highly Efficient N,N,N-Cobalt Olefin Polymerization Catalysts Affixed with N-2,4-Bis(Dibenzosuberyl)-6-Fluorophenyl Groups

The cobalt(II) chloride N,N,N-pincer complexes, [2-{(2,4-(C15H13)2-6-FC6H2)N=CMe}-6-(ArN=CMe)C5H3N]CoCl2 (Ar = 2,6-Me2C6H3) (Co1), 2,6-Et2C6H3 (Co2), 2,6-i-Pr2C6H3 (Co3), 2,4,6-Me3C6H2 (Co4), 2,6-Et2-4-MeC6H2 (Co5), and [2,6-{(2,4-(C15H13)2-6-FC6H2)N=CMe}2C5H3N]CoCl2 (Co6), each containing at least one N-2,4-bis(dibenzosuberyl)-6-fluorophenyl group, were synthesized in good yield from their corresponding unsymmetrical (L1–L5) and symmetrical bis(imino)pyridines (L6). The molecular structures of Co1 and Co2 spotlighted their distorted square pyramidal geometries (τ5 value range: 0.23–0.29) and variations in steric hindrance offered by the dissimilar N-aryl groups. On activation with either MAO or MMAO, Co1–Co6 all displayed high activities for ethylene polymerization, with levels falling in the order: Co1 > Co4 > Co5 > Co2 > Co3 > Co6. Indeed, the least sterically hindered 2,6-dimethyl Co1 in combination with MAO exhibited a very high activity of 1.15 × 107 g PE mol−1 (Co) h−1 at the operating temperature of 70 °C, which dropped by only 15% at 80 °C and 43% at 90 °C. Vinyl-terminated polyethylenes of high linearity and narrow dispersity were generated by all catalysts, with the most sterically hindered, Co3 and Co6, producing the highest molecular weight polymers [Mw range: 30.26–33.90 kg mol−1 (Co3) and 42.90–43.92 kg mol−1 (Co6)]. In comparison with structurally related cobalt catalysts, it was evident that the presence of the N-2,4-bis(dibenzosuberyl)-6-fluorophenyl groups had a limited effect on catalytic activity but a marked effect on thermal stability.

Dendronized Porphyrins: Molecular Design and Synthesis

Abstract:

In this review, we report different methods and strategies to synthesize flexible and rigid dendronized porphyrins. We will focus on porphyrin dendrimers that have been reported in the last 10 years. Particularly, in our research group, we have designed and synthesized different series of dendronized porphyrins (free base and metallated) with pyrene units at the periphery and Fréchet-type dendritic arms. The Lindsey methodology has allowed the synthesis of meso-substituted porphyrins with various substitution patterns, such as symmetric, dissymmetric, or unsymmetric. Porphyrin dendrimers have been prepared by different synthetic methodologies; one of the most reported being the convergent method, where the dendrons are first prepared and further linked to a meso-substituted functionalized porphyrin unit, which will constitute the core of the dendrimer. Another interesting synthetic approach is the use of a reactive dendron bearing a terminal aldehyde functional group to form the final porphyrin core. In this way, a two-armed dendronized dissymmetric porphyrin core can be prepared from a dendritic precursor and a dipyrromethene derivative. This strategy is very convenient to prepare low-generation dendritic porphyrins. The divergent approach is another well-known methodology for porphyrin dendrimer synthesis, mostly used for the obtainment of high-generation dendrimers. Click chemistry reaction has been advantageous for the development of more complex porphyrin dendritic structures. This reaction presents important advantages, such as high yields and mild reaction conditions which permit the assembly of different multiporphyrin dendritic structures. In the constructs presented in this review, the emission of the porphyrin moiety has been observed, leading to potential applications in artificial photosynthesis, sensing, nanomedicine, and biological sciences.

Phthalocyanine-Cored Fluorophores with Fluorene-Containing Peripheral Two-Photon Antennae as Photosensitizers for Singlet Oxygen Generation

A series of free base and Zn(II) phthalocyanines featuring fluorenyl antennae linked by methoxy or oxo bridges to the phthalocyanine core (Pc) were synthesized and characterized. Selected linear and nonlinear (two-photon absorption) optical properties of these new compounds were subsequently studied. As previously observed for related porphyrin dendrimers bearing 2-fluorenyl peripheral dendrons, an efficient energy transfer occurs from the peripheral antennae to the central phthalocyanine core following excitation in the fluorenyl-based π–π* absorption band of these chromophores. Once excited, these compounds relax to the ground state, mostly by emitting intense red light or by undergoing intersystem crossing. As a result, the tetrafunctionalized Zn(II) phthalocyanines are fluorescent, but can also efficiently photosensitize molecular oxygen in tetrahydrofurane (THF), forming singlet oxygen with nearly comparable yields to bare Zn(II) phthalocyanine (ZnPc). In comparison with the latter complex, the positive role of the fluorenyl-containing antennae on one- and two-photon brightness (2PA) is presently demonstrated when appended in peripheral (β) position to the phthalocyanine core. Furthermore, when compared to known porphyrin analogues, the interest in replacing the porphyrin by a phthalocyanine as the central core to obtain more fluorescent two-photon oxygen photosensitizers is clearly established. As such, this contribution paves the way for the future development of innovative biphotonic photosensitizers usable in theranostics.

Activity and Thermal Stability of Cobalt(II)-Based Olefin Polymerization Catalysts Adorned with Sterically Hindered Dibenzocycloheptyl Groups

Five examples of unsymmetrical 2-(2,4-bis(dibenzocycloheptyl)-6-methylphenyl- imino)ethyl)-6-(1-(arylyimino)ethyl)pyridine derivatives (aryl = 2,6-Me₂C₆H₃ in L1; 2,6-Et₂C₆H₃ in L2; 2,6-i-Pr₂C₆H₃ in L3; 2,4,6-Me₃C₆H₂ in L4 and 2,6-Et₂-4-MeC₆H₂ in L5) were prepared and characterized. Treatment with CoCl₂ offered the corresponding cobalt precatalysts Co1–Co5, which were characterized by FT-IR and NMR spectroscopy as well as elemental analysis. The molecular structures of Co3 and Co4 determined by single crystal X-ray diffraction revealed distorted square pyramidal geometries with τ₅ values of 0.052–0.215. Activated with either MAO or MMAO, the precatalysts displayed high activities in ethylene polymerization, where Co1 with the least bulky substituents exhibited a peak activity of 1.00 × 10⁷ g PE mol⁻¹ (Co) h⁻¹ at 60 °C. With MAO as a cocatalyst, the activity was reduced only by one order of magnitude at 90 °C, which implies thermally stable active sites. The polymerization product was highly linear polyethylene with vinyl end groups. Co3 with the most sterically hindered active sites was capable of generating polyethylene of high molecular weight, reaching 6.46 × 10⁵ g mol⁻¹. Furthermore, high melting point and unimodal molecular weight distribution were observed in the resulting polyethylene. It must be stressed that the thermal stability of the catalyst and the molecular weight of the obtained polyethylene attain the highest values reported for the unsymmetrical 2,6-bis(imino)pyridylcobalt (II) chloride precatalysts.

One-pot sequential multicomponent reaction and a multicomponent polymerization method for the synthesis of topologically different polymers

The synthesis of topologically different polymers via a one-pot sequential multicomponent reaction and multicomponent polymerization is reported.

Cooperative self-assembly of porphyrins with polymers possessing bioactive functions

This review covers recent research on design strategies for the cooperative self-assembly of porphyrins with polymers and its implementation as bioactive assembly.

Polymeric catenanes synthesized via “click” chemistry and atom transfer radical coupling

A novel route for the synthesis of polymeric catenanes was domonstrated by grafting to strategy via CuAAC reaction followed by ring closure via ATRC. The polymeric catenane was characterized by GPC and AFM imaging.

Responsive single-chain polymer nanoparticles with host–guest features

We report a facile approach to form ultra-fine single-chain polymer nanoparticles (SCPNs)viadisulfide-based intrachain crosslinking of single polymer chains of a random copolymer poly(HEMA-co-PDSEMA).

An theoretical investigation of reaction site of 2,4′,6-trifluorobenzophenone, 2,4′,6-trifluorophenylsulfone with hydroquinone

A detailed theoretical study for the nucleophilic aromatic substitution reaction of 2,4′,6-trifluorobenzophenone (TF), 2,4′,6-trifluorophenylsulfone (TFS) with hydroquinone was performed at the density function theory level together with the polarizable continuum model. With detailed free energy profiles and transition state structures, our theoretical study confirms that TF or TFS with the para-position fluorine has more thermodynamic and kinetic advantages than that with the ortho-position fluorine. In addition, the calculations involving the local reactivity indices (Fukui function), the global reactivity indices (electronic chemical potential), and rate constants further corroborate the location of the preferred bonding site. The impacts of resonance effect, introductive effect, and steric effect were comprehensively considered to explain the reason why para-position is a good reaction site. Our computational results are in good agreement with experimental results and give the potential polymer materials TFS.

Conformation-dependent translocation of a star polymer through a nanochannel

The translocation process of star polymers through a nanochannel is investigated by dissipative particle dynamics simulations. The translocation process is strongly influenced by the star arm arrangement as the polymer enters the channel, and a scaling relation between the translocation time [Formula: see text] and the total number of beads N tot is obtained. Qualitative agreements are found with predictions of the nucleation and growth model for linear block co-polymer translocation. In the intermediate stage where the center of the star polymer is at the channel entrance, the translocation time is found to have power law-dependence on the number of arms outside the channel and very weakly dependent on the number of arms in the channel. Increasing the total number of star arms also increases the star translocation time.

Porphyrins with a carbosilane dendrimer periphery as synthetic components for supramolecular self-assembly

The preparation of the shape-persistent carbosilane-functionalized porphyrins H2TPP(4-SiRR'Me)4, Zn(II)-TPP(4-SiRR'Me)4 (R = R' = Me, CH2CH=CH2, CH2CH2CH2OH; R = Me, R' = CH2CH=CH2, CH2CH2CH2OH; TPP = tetraphenyl porphyrin), H2TPP(4-Si(C6H4-1,4-SiRR'Me)3)4, and Zn(II)-TPP(4-Si(C6H4-1,4-SiRR'Me)3)4 (R = R' = Me, CH2CH=CH2; R = Me, R' = CH2CH[double bond, length as m-dash]CH2) using the Lindsey condensation methodology is described. For a series of five samples their structures in the solid state were determined by single crystal X-ray structure analysis. The appropriate 0th and 1st generation porphyrin-based 1,4-phenylene carbosilanes form 2D and 3D supramolecular network structures, primarily controlled by either π-π interactions (between pyrrole units and neighboring phenylene rings) or directional molecular hydrogen recognition and zinc-oxygen bond formation in the appropriate hydroxyl-functionalized molecules. UV-Vis spectroscopic studies were carried out in order to analyze the effect of the dendritic branches on the optical properties of the porphyrin ring.

Fluorescent bowl-shaped nanoparticles from ‘clicked’ porphyrin–polymer conjugates

We report the synthesis and post-synthetic modification of a library of hydrophilic and hydrophobic ‘clicked’ triazole-linked porphyrin–polymer conjugates (PPCs), and their subsequent assembly into fluorescent bowl-shaped nanoparticles.

Star block-copolymers: enzyme-inspired catalysts for oxidation of alcohols in water

We describe a family of star block-copolymers rationally designed for enzyme-inspired catalysis of alcohol oxidation in water.

Constructing Regioregular Star Poly(3-hexylthiophene) via Externally Initiated Kumada Catalyst-Transfer Polycondensation

A synthetic route was developed for the preparation of di- and trifunctional Ni complex-based initiators. Each initiator affords well-defined 2-arm (V-shaped) and 3-arm (Y-shaped) regioregular poly(3-hexylthiophene) (rr-P3HT) with controlled molecular weight and narrow polydispersities by the externally initiated Kumada catalyst-transfer polycondensation. The core spacer length and end o-tolylhalide group of the functional initiators exhibited differences in reactivity and show that the biphenyl spacers are effective for the synthesis of V-shaped and Y-shaped rr-P3HTs.

Singlet and triplet energy transfers in tetra-(meso-truxene)zinc(II)- and tetra-(meso-tritruxene)zinc(II) porphyrin and porphyrin-free base dendrimers

The synthesis, optical properties, and energy transfer features of four dendrimers composed of meso-tetrasubstituted zinc(II) porphyrin (ZnP) or a free base (P) central core, where the substituents are four truxene (Tru) or four tritruxene dendrons (TriTru), TruP, TriTruP, TruZnP, and TriTruZnP, are reported. Selective excitation of the truxene donors results in a photoinduced singlet energy transfer from the truxenes to the porphyrin acceptor. The rates for singlet energy transfer (k(ET)), evaluated from the change in the fluorescence lifetime of the donors (Tru and TriTru) in the presence and absence of the acceptor (P or ZnP) for TruP, TruZnP, TriTruP, and TriTruZnP, are 5.9, 1.2, 0.87, and 0.74 (ns)(-1) at 298 K and 2.6, 2.6, 2.7, and 1.2 (ns)(-1) at 77 K, respectively. A slow triplet-triplet energy transfer from truxene to porphyrin cores in glassy 2MeTHF at 77 K is also reported with rates of 1.3 × 10(3) and 0.10 × 10(2) s(-1) for TruZnP and TriTruZnP, respectively. If the Dexter mechanism for the triplet energy transfers is considered, these slow rates are easily explained by a poor orbital overlap between the truxene and porphyrin π systems. The fluorescence quantum yields (Φ(F)) are 0.20 and 0.16 for TruP and TriTruP and 0.08 and 0.10 for TruZnP and TriTruZnP, respectively at 298 K. At 298 K, a phosphorescence from TruZnP at 795 nm was also observed and is associated with the ZnP chromophore.

A direct route to cyclic organic nanostructures via ring-expansion metathesis polymerization of a dendronized macromonomer

Cyclic organic nanostructures were prepared via ring-expansion metathesis polymerization of a dendronized norbornene macromonomer. The strategy provides a direct, efficient route to nanoscale rings in a single operation. AFM imaging confirmed toroidal features having diameters of ca. 35-40 nm.

Tailored Composite Polymer-Metal Nanoparticles by Miniemulsion Polymerization and Thiol-ene Functionalization

A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer-metal nanoparticle materials. The procedure produces well-defined composite structures consisting of gold, silver or MnFe(2)O(4) nanoparticles (∼10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (∼100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content, and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol-ene chemistry is demonstrated.