FRET study of a trifluorophore-labeled DNAzyme

Versatile photocatalytic activities of indenoquinoxalines for dye reduction, single-crystal nucleation, and MNP formation with iron scrap under sunlight

In this work, 11H-indeno[1,2-b]quinoxalin-11-one (IQ), 7-nitro-11H-indeno[1,2-b]quinoxalin-11-one (NIQ), and 7-chloro-11H-indeno[1,2-b]quinoxalin-11-one (CIQ) as indenoquinoxalines (IQPs) and 7-nitro-2'-(4-nitrophenyl)-5',6',7',7a'-tetrahydrospiro[indeno[1,2-b]quinoxaline-11,3'-pyrrolizine]-1',1'(2'H)-dicarbonitrile (SIQPNO2) spiroheterocyclics were synthesized. These molecules photocatalytically reduced methylene blue (MB), methyl orange (MO), brilliant blue R (BBR), and Rhodamine B (RhB) in aqueous acetonitrile (aq-ACN) under sunlight (SL) for the first time. The IQPs and SIQPNO2 with a lanthanide graphene oxide template (LGT) of lanthanide sulfide nanorods (Ln2S3, Ce2S3, Tb2S3, and Ho2S3) photocatalytically reduced the dyes. IQ alone reduced MB in ∼2 min, while with LaGT, CeGT, TbGT, and HoGT in 7, 10, 11, and 13 min, respectively. NIQ and CIQ alone photocatalytically reduced MB in 18 and 32 min, while with LaGT, CeGT, TbGT, and HoGT in 18, 31, 23, and 28 min and 33, 55, 45, and 51 min, respectively. IQ with CO2 photocatalytically reduced MB and QHIn in 90 s and 17 min unlike 2 and 24 min without CO2, respectively. SIQPNO2 alone reduced MB in 190 min, while with CeGT, TbGT, HoGT, and LaGT in 242, 225, 197, and 88 min, respectively. IQ with LaGT photocatalytically reduced MB in 7 min, while SIQPNO2 with LaGT in 88 min. IQ received maximum photon (hv) producing robust redox cycles (ROCs) compared to SIQPNO2. SIQPI, SIQPII, SIQPIII, and SIQPNO2 (SIQPs) individually reduced MB in 95, 43, 54, and 190 min, while SIQPs with NIQ in 63, 35, 47, and 64 min, respectively. IQ with Fe scrap in ACN developed a single crystal in 2 weeks, while in 2 : 8, 3 : 7, 5 : 5, 7 : 3, and 8 : 2 aq-ACN media, the magnetic nanoparticles (MNPs) developed at normal temperature and pressure (NTP).

Maximizing the Accuracy of Equilibrium Dissociation Constants for Affinity Complexes: From Theory to Practical Recommendations

The equilibrium dissociation constant (Kd) is a major characteristic of affinity complexes and one of the most frequently determined physicochemical parameters. Despite its significance, the values of Kd obtained for the same complex under similar conditions often exhibit considerable discrepancies and sometimes vary by orders of magnitude. These inconsistencies highlight the susceptibility of Kd determination to large systematic errors, even when random errors are small. It is imperative to both minimize and quantitatively assess the systematic errors inherent in Kd determination. Traditionally, Kd values are determined through nonlinear regression of binding isotherms. This analysis utilizes three variables: concentrations of two reactants and a fraction R of unbound limiting reactant. The systematic errors in Kd arise directly from systematic errors in these variables. Therefore, to maximize the accuracy of Kd, this study thoroughly analyzes the sources of systematic errors within the three variables, including (i) non-additive signals to calculate R, (ii) mis-calibrated experimental instruments, (iii) inaccurate calibration parameters, (iv) insufficient incubation time, (v) unsaturated binding isotherm, (vi) impurities in the reactants, and (vii) solute adsorption onto surfaces. Through this analysis, we illustrate how each source contributes to inaccuracies in the determination of Kd and propose strategies to minimize these contributions. Additionally, we introduce a method for quantitatively assessing the confidence intervals of systematic errors in concentrations, a crucial step toward quantitatively evaluating the accuracy of Kd. While presenting original findings, this paper also reiterates the fundamentals of Kd determination, hence guiding researchers across all proficiency levels. By shedding light on the sources of systematic errors and offering strategies for their mitigation, our work will help researchers enhance the accuracy of Kd determination, thereby making binding studies more reliable and the conclusions drawn from such studies more robust.

Design of a Membrane-Anchored DNAzyme-Based Molecular Machine for Enhanced Cancer Therapy by Customized Cascade Regulation

Synthetic DNAzyme-based structures enable dynamic cell regulation. However, engineering an effective and targeted DNAzyme-based structure to perform customizable multistep regulation remains largely unexplored. Herein, we designed a membrane-anchored DNAzyme-based molecular machine to implement dynamic inter- and intracellular cascade regulation, which realizes efficient T-cell/cancer cell interactions and subsequent receptor mediated cancer cell uptake. Using CD8+ T-cells and HeLa cancer cells as a proof of concept, we demonstrate that the designed DNAzyme-based molecular machine enables customized cascade regulation including (1) specific recognition between T-cells and cancer cells, (2) specific response and fluorescence sensing upon extracellular stimuli, and (3) cascade regulation including intercellular distance shortening, cell-cell communication, and intracellular delivery of anticancer drugs. Together, this work provides a promising pathway for customized cascade cell regulation based on a DNAzyme-based molecular machine, which enables enhanced cancer therapy by combining T-cell immunotherapy and chemotherapy.

DNAzyme-Powered DNA Walker for Cooperative Expression Imaging of Mutant p53 and Telomerase in Cancer Cells

Cooperative expression of multiple cancer biomarkers is of great significance in influencing cell pathways and drug treatment. However, the simultaneous analysis of low-abundance biomarkers in living cells remains a challenge. Here, we report a DNAzyme-powered DNA walker to visualize the cooperative expression of mutant p53 and telomerase in living cells. The activation of the DNA walker is orthogonally powered by mutated p53 and telomerase, which enables the unlocking of the walking strand and the subsequently repeated substrate cleavage, producing fluorescence recovery for the imaging of the two target molecules in living cells. The DNA walker allows for real-time monitoring of the expression profile of mutant p53 and active telomerase in cancer cells under various antitumor drug treatments, and the results demonstrate the cooperative expression of mutant p53 and telomerase via the Akt pathway, which may bring new insights into the study of cancer pathway-relevant biomarkers.

Single-Molecule Study of DNAzyme Reveals Its Intrinsic Conformational Dynamics

DNAzyme is a class of DNA molecules that can perform catalytic functions with high selectivity towards specific metal ions. Due to its potential applications for biosensors and medical therapeutics, DNAzyme has been extensively studied to characterize the relationships between its biochemical properties and functions. Similar to protein enzymes and ribozymes, DNAzymes have been found to undergo conformational changes in a metal-ion-dependent manner for catalysis. Despite the important role the conformation plays in the catalysis process, such structural and dynamic information might not be revealed by conventional approaches. Here, by using the single-molecule fluorescence resonance energy transfer (smFRET) technique, we were able to investigate the detailed conformational dynamics of a uranyl-specific DNAzyme 39E. We observed conformation switches of 39E to a folded state with the addition of Mg²⁺ and to an extended state with the addition of UO₂²⁺. Furthermore, 39E can switch to a more compact configuration with or without divalent metal ions. Our findings reveal that 39E can undergo conformational changes spontaneously between different configurations.

Combination Cancer Treatment: Using Engineered DNAzyme Molecular Machines for Dynamic Inter- and Intracellular Regulation

Despite the promise of combination cancer therapy, it remains challenging to develop targeted strategies that are nontoxic to normal cells. Here we report a combination therapeutic strategy based on engineered DNAzyme molecular machines that can promote cancer apoptosis via dynamic inter- and intracellular regulation. To achieve external regulation of T-cell/cancer cell interactions, we designed a DNAzyme-based molecular machine with an aptamer and an i-motif, as the MUC-1-selective aptamer allows the specific recognition of cancer cells. The i-motif is folded under the tumor acidic microenvironment, shortening the intercellular distance. As a result, T-cells are released by metal ion activated DNAzyme cleavage. To achieve internal regulation of mitochondria, we delivered another DNAzyme-based molecular machine with mitochondria-targeted peptides into cancer cells to induce mitochondria aggregation. Our strategy achieved an enhanced killing effect in zinc deficient cancer cells.

Spiroheterocyclic Photocatalyst for Reducing QHIn-Persistent Pollutants, Dyes, and Transition-Metal Ions Cocatalyzed with Electrolytes

The 7-nitro-2'-phenyl-5',6',7',7a'-tetrahydrospiro[indeno[1,2-b]quinoxaline-11,3'-pyrrolizine]-1',1'(2'H)-dicarbonitrile (SIQPI), 2'-(4-cyanophenyl)-7-nitro-5',6',7',7a'-tetrahydrospiro[indeno[1,2-b]quinoxaline-11,3'-pyrrolizine]-1',1'(2'H) dicarbonitrile (SIQPII), and 2'-(4-methoxyphenyl)-7-nitro-5',6',7',7a'-tetrahydrospiro[indeno[1,2-b]quinoxaline-11,3'-pyrrolizine]-1',1'(2'H)-dicarbonitrile (SIQPIII) were used to photocatalyze quinonoid phenolphthalein (QHIn) in aq-ACN-EtOH (mixed solvent) with NaCl and KCl electrolytes. SIQPI, II, and III spiroindenoquinoxaline pyrrolidines (SIQPs) as spiroheterocyclic photocatalysts alone could not reduce QHIn, but with the addition of electrolytes they are reduced via π cationic interactions (PCI). SIQPI, II, and III with NaCl reduced QHIn in 120, 28, and 50 min, unlike in 138, 58, and 63 min with KCl in mixed solvent. SIQPI, II, and III alone have reduced methylene blue (MB) in 120, 45, and 70 min, unlike in 110, 27, and 55 min with graphene oxide (GO), whereas with NaCl and KCl hey are reduced in 82, 36, and 44 min and 89, 43, and 50 min, respectively. SIQPs with GO had reduced MB in less time than the SIQPs alone, and SIQPs with NaCl had reduced QHIn in a shorter time than KCl. The electrolytes have cocatalyzed a reduction of dyes under sunlight (SL). The electrolytes have reduced a quinonoid structure (QS) and dyes by generating negative and positive (e ^- and h ⁺) holes in a shorter time. SIQPII and magnetic nanoparticles (MNPs) of 58 nm with NaCl photocatalyzed the QHIn in 2880 min. The SIQPs also reduced methyl orange (MO) and brilliant blue R (BBR) at variable temperature (T) and pH range, whereas SIQPs have developed a molecular organic framework (MOF) with transition-metal salts (NiCl₂, CrO₃, KMnO₄, CuSO₄, and MnCl₂) on photocatalysis.

Three-Fluorophore FRET Enables the Analysis of Ternary Protein Association in Living Plant Cells

Protein-protein interaction studies provide valuable insights into cellular signaling. Brassinosteroid (BR) signaling is initiated by the hormone-binding receptor Brassinosteroid Insensitive 1 (BRI1) and its co-receptor BRI1 Associated Kinase 1 (BAK1). BRI1 and BAK1 were shown to interact independently with the Receptor-Like Protein 44 (RLP44), which is implicated in BRI1/BAK1-dependent cell wall integrity perception. To demonstrate the proposed complex formation of BRI1, BAK1 and RLP44, we established three-fluorophore intensity-based spectral Förster resonance energy transfer (FRET) and FRET-fluorescence lifetime imaging microscopy (FLIM) for living plant cells. Our evidence indicates that RLP44, BRI1 and BAK1 form a ternary complex in a distinct plasma membrane nanodomain. In contrast, although the immune receptor Flagellin Sensing 2 (FLS2) also forms a heteromer with BAK1, the FLS2/BAK1 complexes are localized to other nanodomains. In conclusion, both three-fluorophore FRET approaches provide a feasible basis for studying the in vivo interaction and sub-compartmentalization of proteins in great detail.

Zn2+ -Dependent DNAzymes: From Solution Chemistry to Analytical, Materials and Therapeutic Applications

Since 1994, deoxyribozymes or DNAzymes have been in vitro selected to catalyze various types of reactions. Metal ions play a critical role in DNAzyme catalysis, and Zn²⁺ is a very important one among them. Zn²⁺ has good biocompatibility and can be used for intracellular applications. Chemically, Zn²⁺ is a Lewis acid and it can bind to both the phosphate backbone and the nucleobases of DNA. Zn²⁺ undergoes hydrolysis even at neutral pH, and the partially hydrolyzed polynuclear complexes can affect the interactions with DNA. These features have made Zn²⁺ a unique cofactor for DNAzyme reactions. This review summarizes Zn²⁺ -dependent DNAzymes with an emphasis on RNA-/DNA-cleaving reactions. A key feature is the sharp Zn²⁺ concentration and pH-dependent activity for many of the DNAzymes. The applications of these DNAzymes as biosensors for Zn²⁺ , as therapeutic agents to cleave intracellular RNA, and as chemical biology tools to manipulate DNA are discussed. Future studies can focus on the selection of new DNAzymes with improved performance and detailed biochemical characterizations to understand the role of Zn²⁺ , which can facilitate practical applications of Zn²⁺ -dependent DNAzymes.

A multifunctional DNA nanostructure based on multicolor FRET for nuclease activity assay

We develop a four-color fluorescent probe for ratiometric detection of multiple nucleases based on multistep fluorescence resonance energy transfer.

A photocontrolled and self-powered bipedal DNA walking machine for intracellular microRNA imaging

A photocontrolled and self-powered bipedal DNA walking machine for intracellular microRNA imaging has been reported.

Functionalization of 8-17 DNAzymes modulates catalytic efficiency and divalent metal ion preference

8-17 and 17E DNAzyme are being explored as biosensors for metal ions and RNA motifs of interest, more sensitive and efficient DNAzymes are required to meet the practical applications. Their similarity in the catalytic cores and differences in catalytic efficiency and metal ion dependence initiated great interest about the contribution of the catalytic residues. Functionalization of four adenine residues in the catalytic cores of 8-17 DNAzyme and 17E was conducted with amino, guanidinium, and imidazolyl groups. In the bulge loops of 8-17 and 17E, N⁶-(3-aminopropyl)-2'-deoxyadenosine (residue 1) at A15 led to new DNAzymes 8-17DZ-A15-1 and 17E-A15-1, with much more efficient cleavage ability in the Ca²⁺-mediated reaction and the greater preference for Ca²⁺ over Mg²⁺ than 8-17 DNAzyme and 17E, respectively, especially with a concentration-dependent increase of the selectivity, which is different from most DNAzymes with the similar dependence on both Mg²⁺ and Ca²⁺. With this kind of post-selection modification on 8-17 DNAzymes, for the first time, the catalytic efficiency and metal ion selectivity could be positively modulated. It is also helpful for the catalyic mechanistic studies of these DNAzymes, especially, the role of the unconserved A15 should be emphasized.

Misfolding of a DNAzyme for ultrahigh sodium selectivity over potassium

Herein, the excellent Na+ selectivity of a few RNA-cleaving DNAzymes was exploited, where Na+ can be around 3000-fold more effective than K+ for promoting catalysis. By using a double mutant based on the Ce13d DNAzyme, and by lowering the temperature, increased 2-aminopurine (2AP) fluorescence was observed with addition of both Na+ and K+. The fluorescence increase was similar for these two metals at below 10 mM, after which K+ took a different pathway. Since 2AP probes its local base stacking environment, K+ can be considered to induce misfolding. Binding of both Na+ and K+ was specific, since single base mutations could fully inhibit 2AP fluorescence for both metals. The binding thermodynamics was measured by temperature-dependent experiments revealing enthalpy-driven binding for both metals and less coordination sites compared to G-quadruplex DNA. Cleavage activity assays indicated a moderate cleavage activity with 10 mM K+, while further increase of K+ inhibited the activity, also supporting its misfolding of the DNAzyme. For comparison, a G-quadruplex DNA was also studied using the same system, where Na+ and K+ led to the same final state with only around 8-fold difference in Kd. This study provides interesting insights into strategies for discriminating Na+ and K+.

Construction of Tetrahedral DNA-Quantum Dot Nanostructure with the Integration of Multistep Förster Resonance Energy Transfer for Multiplex Enzymes Assay

Three-dimensional (3D) DNA scaffolds with well-defined structure and high controllability hold promising potentials for biosensing and drug delivery. However, most of 3D DNA scaffolds can detect only a single type of molecule with the involvement of complex logic operations. Herein, we develop a 3D DNA nanostructure with the capability of multiplexed detection by exploiting a multistep Förster resonance energy transfer (FRET). The tetrahedron-structured DNA is constructed by four oligonucleotide strands and is subsequently conjugated to a streptavidin-coated quantum dot (QD) to obtain a QD-Cy3-Texas Red-Cy5 tetrahedron DNA. This QD-Cy3-Texas Red-Cy5 tetrahedral DNA nanostructure has well-defined dye-to-dye spacing and high controllability for energy transfer between intermediary acceptors and terminal acceptors, enabling the generation of multistep FRET between the QD and three dyes (i.e., Cy3, Texas Red, and Cy5) for simultaneous detection of multiple endonucleases and methyltransferases even in complex biological samples as well as the screening of multiple enzyme inhibitors.

Quantitative Single-Molecule Three-Color Förster Resonance Energy Transfer by Photon Distribution Analysis

Single-molecule Förster resonance energy transfer (FRET) is a powerful tool to study conformational dynamics of biomolecules. Using solution-based single-pair FRET by burst analysis, conformational heterogeneities and fluctuations of fluorescently labeled proteins or nucleic acids can be studied by monitoring a single distance at a time. Three-color FRET is sensitive to three distances simultaneously and can thus elucidate complex coordinated motions within single molecules. While three-color FRET has been applied on the single-molecule level before, a detailed quantitative description of the obtained FRET efficiency distributions is still missing. Direct interpretation of three-color FRET data is additionally complicated by an increased shot noise contribution when converting photon counts to FRET efficiencies. However, to address the question of coordinated motion, it is of special interest to extract information about the underlying distance heterogeneity, which is not easily extracted from the FRET efficiency histograms directly. Here, we present three-color photon distribution analysis (3C-PDA), a method to extract distributions of interdye distances from three-color FRET measurements. We present a model for diffusion-based three-color FRET experiments and apply Bayesian inference to extract information about the physically relevant distance heterogeneity in the sample. The approach is verified using simulated data sets and experimentally applied to triple-labeled DNA duplexes. Finally, three-color FRET experiments on the Hsp70 chaperone BiP reveal conformational coordinated changes between individual domains. The possibility to address the co-occurrence of intramolecular distances makes 3C-PDA a powerful method to study the coordination of domain motions within biomolecules undergoing conformational dynamics.

FRET-Based Semiconducting Polymer Dots for pH Sensing

Förster resonance energy transfer (FRET)-based polymer dots (Pdots), fabricated by semiconducting polymers and exhibiting excellent properties, have attracted much interest in the last decade, however, full polymer-dot-based pH sensors are seldom systematically exploited by researchers. In this work, we constructed a kind of blend polymer dot, utilizing poly[(9,9-dihexyl-9H-fluorene-2,7-vinylene)-co-(1-methoxy-4-(2-ethylhexyloxy)-2,5-phenylenevinylene)] (PFV) as the donor, poly[2,5-bis(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (BDMO-PPV) as the acceptor, and polysytrene graft EO functionalized with carboxy (PS-PEG-COOH) to generate surface carboxyl groups. This type of Pdot, based on the FRET process, was quite sensitive to pH value changes, especially low pH environments. When the pH value decreases down to 2 or 1, the fluorescence spectrum of Pdots-20% exhibit spectral and intensity changes at the same time, and fluorescence lifetime changes as well, which enables pH sensing applications. The sharpening of the emission peak at ~524 nm, along with the weakening and blue shifts of the emission band at ~573 nm, imply that the efficiency of the energy transfer between PFV and BDMO-PPV inside the Pdots-20% decreased due to polymer chain conformational changes. The time-resolved fluorescence measurements supported this suggestion. Pdots constructed by this strategy have great potential in many applications, such as industrial wastewater detection, in vitro and intracellular pH measurement, and DNA amplification and detection.

Ensemble multicolour FRET model enables barcoding at extreme FRET levels

Quantitative models of Förster resonance energy transfer (FRET)-pioneered by Förster-define our understanding of FRET and underpin its widespread use. However, multicolour FRET (mFRET), which arises between multiple, stochastically distributed fluorophores, lacks a mechanistic model and remains intractable. mFRET notably arises in fluorescently barcoded microparticles, resulting in a complex, non-orthogonal fluorescence response that impedes their encoding and decoding. Here, we introduce an ensemble mFRET (emFRET) model, and apply it to guide barcoding into regimes with extreme FRET. We further introduce a facile, proportional multicolour labelling method using oligonucleotides as homogeneous linkers. A total of 580 barcodes were rapidly designed and validated using four dyes-with FRET efficiencies reaching 76%-and used for multiplexed immunoassays with cytometric readout and fully automated decoding. The emFRET model helps to expand the barcoding capacity of barcoded microparticles using common organic dyes and will benefit other applications subject to stochastic mFRET.

Splitting a DNAzyme enables a Na+-dependent FRET signal from the embedded aptamer

Recently, a few Na⁺-specific RNA-cleaving DNAzymes have been reported, and a Na⁺ aptamer was identified from the NaA43 and Ce13d DNAzymes. These DNAzymes and the embedded aptamer have been used for Na⁺ detection. In this work, we studied the Na⁺-dependent folding of the Ce13d DNAzyme using fluorescence resonance energy transfer (FRET). When a FRET donor and an acceptor were respectively labeled at the ends of the DNAzyme, Na⁺ failed to induce an obvious end-to-end distance change, suggesting a rigid global structure. To relax this rigidity, the Ce13d DNAzyme was systematically split at various sites on both the enzyme and the substrate strands. The Na⁺ binding activity of the split structures was characterized by 2-aminopurine fluorescence, enzymatic activity, Tb³⁺-sensitized luminescence, and DMS footprinting. Among the various constructs, the only one that retained Na⁺ binding was the split at the cleavage site, and this construct was further labeled with two dyes near the split site. This FRET result showed Na⁺-dependent folding with a K_d of 26 mM Na⁺. This study provides important structural information related to Na⁺ binding to this new aptamer, which might also be useful for future work in biosensor design.

Site-specific one-pot triple click labeling for DNA and RNA

We report site-specific triple click labeling for DNA and RNA in a one-pot setup by performing inverse electron demand Diels–Alder reaction and strain-promoted and copper catalyzed click reactions sequentially.

Folding of the silver aptamer in a DNAzyme probed by 2-aminopurine fluorescence

The RNA-cleaving Ag10c DNAzyme was recently isolated via in vitro selection and it can bind two Ag⁺ ions for activity. The Ag10c contains a well-defined Ag⁺ binding aptamer as indicated by DMS footprinting. Since aptamer binding is often accompanied with conformational changes, we herein used 2-aminopurine (2AP) to probe its folding in the presence of Ag⁺. The Ag10c was respectively labeled with 2AP at three different positions, both in the substrate strand and in the enzyme strand, one at a time. Ag⁺-induced folding was observed at the substrate cleavage junction and the A9 position of the enzyme strand, consistent with aptamer binding. The measured K_d at the A9 position was 18 μM Ag⁺ with a Hill coefficient of 2.17, similar to those obtained from the previous cleavage activity based assays. However, labeling a 2AP at the A2 position inhibited the activity and folding. Compared to other metal ions, Ag⁺ has a unique sigmoidal folding profile indicative of multiple silver binding cooperatively. This suggests that Ag⁺ can induce a local folding in the enzyme loop and this folding is important for activity. This study provides important biophysical insights into this new DNAzyme, suggesting the possibility of designing folding-based biosensors for Ag⁺.

DNA photonic nanowires with tunable FRET signals on the basis of toehold-mediated DNA strand displacement reactions

A DNA photonic nanowire with tunable FRET signals was fabricated on the basis of cascaded toehold-mediated DNA strand displacement reactions. Different DNA inputs were added to trigger the reaction network, and the corresponding FRET signals were obtained. Compared to the direct hybridization, this design is sensitive for 2 nM targets within 20 min and also causes color changes of the solution with blue-light excitation. It could also be applied in live cells to monitor MicroRNA with a simple modification which might become a low-cost method for further application in the future.

Two-step FRET mediated metal ion induced signalling responses in a probe appended with three fluorophores

A tri-fluorophore appended Tren receptor based probe exhibited chelation induced ratiometric fluorescence signalling through a two-step FRET process; enhancement of F_An→ F_Rhenergy transfer efficiency through an F_NBDintermediate was observed.

Local conformational changes in the 8–17 deoxyribozyme core induced by activating and inactivating divalent metal ions

Placing 2-aminopurine at position 15 of the 8–17 DNAzyme allows the detection of a specific metal-induced conformational change, apparently coupled to the activation of catalysis.

A highly specific sodium aptamer probed by 2-aminopurine for robust Na+ sensing

Sodium is one of the most abundant metals in the environment and in biology, playing critical ecological and physiological roles. Na⁺ is also the most common buffer salt for nucleic acids research, while its specific interaction with DNA has yet to be fully studied. Herein, we probe a highly selective and robust Na⁺ aptamer using 2-aminopurine (2AP), a fluorescent adenine analog. This aptamer has two DNA strands derived from the Ce13d DNAzyme. By introducing a 2AP at the cleavage site of the substrate strand, Na⁺ induces ∼40% fluorescence increase. The signaling is improved by a series of rational mutations, reaching >600% with the C₁₀A₂₀ double mutant. This fluorescence enhancement suggests relaxed base stacking near the 2AP label upon Na⁺ binding. By replacing a non-conserved adenine in the enzyme strand by 2AP, Na⁺-dependent fluorescence quenching is observed, suggesting that the enzyme loop folds into a more compact structure upon Na⁺ binding. The fluorescence changes allow for Na⁺ detection. With an optimized sequence, a detection limit of 0.4 mM Na⁺ is achieved, reaching saturated signal in less than 10 s. The sensor response is insensitive to ionic strength, which is critical for Na⁺ detection.

Multichromophoric π-Conjugation: Modular Design for Gated and Cascade Energy Transfer

Multichromophore arrays allow for cascade energy transfer. As an isoelectronic analogue of indacenyl, bis(triazolo)benzene features a fused tricyclic skeleton that rigidly places two π-extended triazoles in close proximity. Such triazole-based fluorophores behave as electronically independent modules in the ground states, but become tightly coupled upon photoexcitation for highly efficient excitation energy transfer (EET) that can be gated by external stimuli. Taking this donor-acceptor fluorophore system a step further, we have designed and implemented a cascade EET. Here, the initial excitation takes part in a circular relay to arrive at the longest-wavelength emitting site as the final destination. Modularly constructed triazoloarenes should serve as versatile platforms for chemically controlled optical signaling.

Biochemical and Biophysical Understanding of Metal Ion Selectivity of DNAzymes

This review summarizes research into the metal-binding properties of catalytic DNAzymes, towards the goal of understanding the structural properties leading to metal ion specificity. Progress made and insight gained from a range of biochemical and biophysical techniques are covered, and promising directions for future investigations are discussed.

Intracellular cascade FRET for temperature imaging of living cells with polymeric ratiometric fluorescent thermometers

Intracellular temperature plays a prominent role in cellular functions and biochemical activities inside living cells, but effective intracellular temperature sensing and imaging is still in its infancy. Herein, thermoresponsive double hydrophilic block copolymers (DHBCs)-based fluorescent thermometers were fabricated to investigate their application in intracellular temperature imaging. Blue-emitting coumarin monomer, CMA, green-emitting 7-nitro-2,1,3-benzoxadiazole (NBD) monomer, NBDAE, and red-emitting rhodamine B monomer, RhBEA, were copolymerized separately with N-isopropylacrylamide (NIPAM) to afford dye-labeled PEG-b-P(NIPAM-co-CMA), PEG-b-P(NIPAM-co-NBDAE), and PEG-b-P(NIPAM-co-RhBEA). Because of the favorable fluorescence resonance energy transfer (FRET) potentials between CMA and NBDAE, NBDAE and RhBEA, as well as the slight tendency between CMA and RhBEA fluorophore pairs, three polymeric thermometers based on traditional one-step FRET were fabricated by facile mixing two of these three fluorescent DHBCs, whereas exhibiting limited advantages. Thus, two-step cascade FRET among three polymeric fluorophores was further interrogated, in which NBD acted as a bridging dye by transferring energy from CMA to RhBEA. Through the delicate optimization of the molar contents of three polymeric components, a ∼8.4-fold ratio change occurred in the temperature range of 20-44 °C, and the detection sensitivity improved significantly, reached as low as ∼0.4 °C, which definitely outperformed other one-step FRET thermometers in the intracellular temperature imaging of living cells. To our knowledge, this work represents the first example of polymeric ratiometric thermometer employing thermoresponsive polymer-based cascade FRET mechanism.

Nucleotidyl transferase assisted DNA labeling with different click chemistries

Here, we present a simple, modular and efficient strategy that allows the 3′-terminal labeling of DNA, regardless of whether it has been chemically or enzymatically synthesized or isolated from natural sources. We first incorporate a range of modified nucleotides at the 3′-terminus, using terminal deoxynucleotidyl transferase. In the second step, we convert the incorporated nucleotides, using either of four highly efficient click chemistry-type reactions, namely copper-catalyzed azide-alkyne cycloaddition, strain-promoted azide-alkyne cycloaddition, Staudinger ligation or Diels-Alder reaction with inverse electron demand. Moreover, we create internal modifications, making use of either ligation or primer extension, after the nucleotidyl transferase step, prior to the click reaction. We further study the influence of linker variants on the reactivity of azides in different click reactions. We find that different click reactions exhibit distinct substrate preferences, a fact that is often overlooked, but should be considered when labeling oligonucleotides or other biomolecules with click chemistry. Finally, our findings allowed us to extend our previously published RNA labeling strategy to the use of a different copper-free click chemistry, namely the Staudinger ligation.

Applications of synchrotron-based spectroscopic techniques in studying nucleic acids and nucleic acid-functionalized nanomaterials

In this review, we summarize recent progress in the application of synchrotron-based spectroscopic techniques for nucleic acid research that takes advantage of high-flux and high-brilliance electromagnetic radiation from synchrotron sources. The first section of the review focuses on the characterization of the structure and folding processes of nucleic acids using different types of synchrotron-based spectroscopies, such as X-ray absorption spectroscopy, X-ray emission spectroscopy, X-ray photoelectron spectroscopy, synchrotron radiation circular dichroism, X-ray footprinting and small-angle X-ray scattering. In the second section, the characterization of nucleic acid-based nanostructures, nucleic acid-functionalized nanomaterials and nucleic acid-lipid interactions using these spectroscopic techniques is summarized. Insights gained from these studies are described and future directions of this field are also discussed.

Two Pb2+-specific DNAzymes with opposite trends in split-site-dependent activity

By splitting the catalytic core of DNAzymes into two halves, two Pb(2+)-specific DNAzymes retain partial activity, while they show opposite trends of activity as a function of the split site, revealing important nucleotides for catalysis and metal binding.

DNA as sensors and imaging agents for metal ions

Increasing interest in detecting metal ions in many chemical and biomedical fields has created demands for developing sensors and imaging agents for metal ions with high sensitivity and selectivity. This review covers recent progress in DNA-based sensors and imaging agents for metal ions. Through both combinatorial selection and rational design, a number of metal-ion-dependent DNAzymes and metal-ion-binding DNA structures that can selectively recognize specific metal ions have been obtained. By attachment of these DNA molecules with signal reporters such as fluorophores, chromophores, electrochemical tags, and Raman tags, a number of DNA-based sensors for both diamagnetic and paramagnetic metal ions have been developed for fluorescent, colorimetric, electrochemical, and surface Raman detection. These sensors are highly sensitive (with a detection limit down to 11 ppt) and selective (with selectivity up to millions-fold) toward specific metal ions. In addition, through further development to simplify the operation, such as the use of "dipstick tests", portable fluorometers, computer-readable disks, and widely available glucose meters, these sensors have been applied for on-site and real-time environmental monitoring and point-of-care medical diagnostics. The use of these sensors for in situ cellular imaging has also been reported. The generality of the combinatorial selection to obtain DNAzymes for almost any metal ion in any oxidation state and the ease of modification of the DNA with different signal reporters make DNA an emerging and promising class of molecules for metal-ion sensing and imaging in many fields of applications.

Separation of Short Single- and Double-Stranded DNA Based on Their Adsorption Kinetics Difference on Graphene Oxide

Separation of short single- and double-stranded DNA typically requires gel electrophoresis followed by DNA extraction, which is a time consuming process. Graphene oxide adsorbs single-stranded DNA more quickly than double-stranded ones, allowing for selective removal of the former with a simple mixing and centrifugation operation. The effect of DNA length and salt on adsorption selectivity has been characterized and its application in DNA melting curve measurement has been demonstrated.

TripleFRET measurements in flow cytometry

A frequently used method for viewing protein interactions and conformation, Förster (fluorescence) resonance energy transfer (FRET), has traditionally been restricted to two fluorophores. Lately, several methods have been introduced to expand FRET methods to three species. We present a method that allows the determination of FRET efficiency in three-dye systems on a flow cytometer. TripleFRET accurately reproduces energy transfer efficiency values measured in two-dye systems, and it can indicate the presence of trimeric complexes, which is not possible with conventional FRET methods. We also discuss the interpretation of energy transfer values obtained with tripleFRET in relation to spatial distribution of labeled molecules, specifically addressing the limitations of using total energy transfer to determine molecular distance.

Detection of lead (II) with a "turn-on" fluorescent biosensor based on energy transfer from CdSe/ZnS quantum dots to graphene oxide

Graphene oxide (GO) sheets are mixed with the aptamer-functionalized CdSe/ZnS quantum dots (QDs). Consequently, the aptamer-conjugated QDs bind to the GO sheets to form a GO/aptamer-QD ensemble, which enables the energy transfer from the QDs to the GO sheets, quenching the fluorescence of QDs. The GO/aptamer-QD ensemble assay acts as a "turn-on" fluorescent sensor for Pb(2+) detection. When Pb(2+) ions are present in the assay, the interaction of Pb(2+) with the aptamer induces a conformational change in the aptamer, leading to the formation of a G-quadruplex/Pb(2+) complex. As a result, the QDs that are linked to the G-quadruplex/Pb(2+) complex are detached from the GO sheet, which "turns on" the fluorescence of the QDs. This sensor exhibits a limit of detection of 90pM and excellent selectivity toward Pb(2+) over a wide range of metal ions. The experiments have provided direct evidence that the fluorescence of QDs is quenched by GO via the nano-metal surface energy transfer (NSET) mechanism rather than the conventional Förster resonance energy transfer (FRET) process.

Advances in quantitative FRET-based methods for studying nucleic acids

Förster resonance energy transfer (FRET) is a powerful tool for monitoring molecular distances and interactions at the nanoscale level. The strong dependence of transfer efficiency on probe separation makes FRET perfectly suited for "on/off" experiments. To use FRET to obtain quantitative distances and three-dimensional structures, however, is more challenging. This review summarises recent studies and technological advances that have improved FRET as a quantitative molecular ruler in nucleic acid systems, both at the ensemble and at the single-molecule levels.

The importance of peripheral sequences in determining the metal selectivity of an in vitro-selected Co(2+) -dependent DNAzyme

DNAzymes are catalytically active DNA molecules that use metal cofactors for their enzymatic functions. While a growing number of DNAzymes with diverse functions and metal selectivities have been reported, the relationships between metal ion selectivity, conserved sequences and structures responsible for selectivity remain to be elucidated. To address this issue, we report biochemical assays of a family of previously reported in vitro selected DNAzymes. This family includes the clone 11 DNAzyme, which was isolated by positive and negative selection, and the clone 18 DNAzyme, which was isolated by positive selection alone. The clone 11 DNAzyme has a higher selectivity for Co(2+) over Pb(2+) compared with clone 18. The reasons for this difference are explored here through phylogenetic comparison, mutational analysis and stepwise truncation. A novel DNAzyme truncation method incorporated a nick in the middle of the DNAzyme to allow for truncation close to the nicked site while preserving peripheral sequences at both ends of the DNAzyme. The results demonstrate that peripheral sequences within the substrate binding arms, most notably the stem loop, loop II, are sufficient to restore its selectivity for Co(2+) over Pb(2+) to levels observed in clone 11. A comparison of these sequences' secondary structures and Co(2+) selectivities suggested that metastable structures affect metal ion selectivity. The Co(2+) selectivity of the clone 11 DNAzyme showed that the metal ion binding and selectivities of small, in vitro selected DNAzymes may be more complex than previously appreciated, and that clone 11 may be more similar to larger ribozymes than to other small DNAzymes in its structural complexity and behavior. These factors should be taken into account when metal-ion selectivity is required in rationally designed DNAzymes and DNAzyme-based biosensors.

Metal-induced specific and nonspecific oligonucleotide folding studied by FRET and related biophysical and bioanalytical implications

Metal induced nucleic acid folding has been extensively studied with ribozymes, DNAzymes, tRNA and riboswitches. These RNA/DNA molecules usually have a high content of double-stranded regions to support a rigid scaffold. On the other hand, such rigid structural features are not available for many in vitro selected or rationally designed DNA aptamers; they adopt flexible random coil structures in the absence of target molecules. Upon target binding, these aptamers adaptively fold into a compact structure with a reduced end-to-end distance, making fluorescence resonance energy transfer (FRET) a popular signaling mechanism. However, nonspecific folding induced by mono- or divalent metal ions can also reduce the end-to-end distance and thus lead to false positive results. In this study we used a FRET pair labeled Hg(II) binding DNA and monitored metal-induced folding in the presence of various cations. While nonspecific electrostatically mediated folding can be very significant, at each tested salt condition, Hg(II) induced folding was still observed with a similar sensitivity. We also studied the biophysical meaning of the acceptor/donor fluorescence ratio that allowed us to explain the experimental observations. Potential solutions for this ionic strength problem have been discussed. For example, probes designed to signal the formation of double-stranded DNA showed a lower dependency on ionic strength.

Metal-ion-dependent folding of a uranyl-specific DNAzyme: insight into function from fluorescence resonance energy transfer studies

Fluorescence resonance energy transfer (FRET) has been used to study the global folding of an uranyl (UO(2)(2+))-specific 39E DNAzyme in the presence of Mg(2+), Zn(2+), Pb(2+), or UO(2)(2+). At pH 5.5 and physiological ionic strength (100 mM Na(+)), two of the three stems in this DNAzyme folded into a compact structure in the presence of Mg(2+) or Zn(2+). However, no folding occurred in the presence of Pb(2+) or UO(2)(2+); this is analogous to the "lock-and-key" catalysis mode first observed in the Pb(2+)-specific 8-17 DNAzyme. However, Mg(2+) and Zn(2+) exert different effects on the 8-17 and 39E DNAzymes. Whereas Mg(2+) or Zn(2+)-dependent folding promoted 8-17 DNAzyme activity, the 39E DNAzyme folding induced by Mg(2+) or Zn(2+) inhibited UO(2)(2+)-specific activity. Group IIA series of metal ions (Mg(2+), Ca(2+), Sr(2+)) also caused global folding of the 39E DNAzyme, for which the apparent binding affinity between these metal ions and the DNAzyme decreases as the ionic radius of the metal ions increases. Because the ionic radius of Sr(2+) (1.12 Å) is comparable to that of Pb(2+) (1.20 Å), but contrary to Pb(2+), Sr(2+) induces the DNAzyme to fold under identical conditions, ionic size alone cannot account for the unique folding behaviors induced by Pb(2+) and UO(2)(2+). Under low ionic strength (30 mM Na(+)), all four metal ions (Mg(2+), Zn(2+), Pb(2+), and UO(2)(2+)), caused 39E DNAzyme folding, suggesting that metal ions can neutralize the negative charge of DNA-backbone phosphates in addition to playing specific catalytic roles. Mg(2+) at low (<2 mM) concentration promoted UO(2)(2+)-specific activity, whereas Mg(2+) at high (>2 mM) concentration inhibited the UO(2)(2+)-specific activity. Therefore, the lock-and-key mode of DNAzymes depends on ionic strength, and the 39E DNAzyme is in the lock-and-key mode only at ionic strengths of 100 mM or greater.

Novel three-color FRET tool box for advanced protein and DNA analysis

We report on a new three-color FRET system which we were able to verify in peptides as well as in synthetic DNA. All three chromophores could be introduced by a building block approach avoiding postsynthetic labeling. Additional features are robustness, matching spectroscopic properties, high-energy transfer, and sensitivity. The system was investigated in detail on a set of peptides as well as an array of tailored oligonucleotides. The detailed analysis of the experimental data and comparison with theoretical considerations were in excellent agreement. It is shown that in the case of polypeptides specific interaction with the fluorescence probes has to be considered. In contrast with DNA, the fluorescence probes did not show any indications of such interactions. The novel three-color FRET toolbox revealed the potential for applications studying fundamental processes of three interacting molecules in life science applications.