A trinuclear heterobimetallic Ru(II)/Pt(II) complex as a chemodosimeter selective for sulfhydryl-containing amino acids and peptides

Determination and Imaging of Small Biomolecules and Ions Using Ruthenium(II) Complex-Based Chemosensors

Luminescence chemosensors are one of the most useful tools for the determination and imaging of small biomolecules and ions in situ in real time. Based on the unique photo-physical/-chemical properties of ruthenium(II) (Ru(II)) complexes, the development of Ru(II) complex-based chemosensors has attracted increasing attention in recent years, and thus many Ru(II) complexes have been designed and synthesized for the detection of ions and small biomolecules in biological and environmental samples. In this work, we summarize the research advances in the development of Ru(II) complex-based chemosensors for the determination of ions and small biomolecules, including anions, metal ions, reactive biomolecules and amino acids, with a particular focus on binding/reaction-based chemosensors for the investigation of intracellular analytes' evolution through luminescence analysis and imaging. The advances, challenges and future research directions in the development of Ru(II) complex-based chemosensors are also discussed.

Selective Detection of Methomyl Pesticide by a Catalytic Chemosensing Assay

The catalytic chemosensing assay (CCA), a new indicator displacement assay, was developed for selective detection of methomyl, a highly toxic pesticide. Trimetallic complex {[Fe^II (dmbpy)(CN)₄ ]-[Pt^II (DMSO)Cl]₂ -[Ru^II (bpy)₂ (CN)₂ ]} (1; dmbpy=4,4'-dimethyl-2,2'-bipyridine, bpy=2,2'-bipyridine) was synthesized as a task-specific catalyst to initially reduce and degrade methomyl to CH₃ SH/CH₃ NH₂ /CH₃ CN/CO₂ . The thus-produced CH₃ SH interacts with the trimetallic complex to displace the cis-[Ru^II (bpy)₂ (CN)₂ ] luminophore for monitoring. Other pesticides, including organophosphates and similar carbamate pesticides, remained intact under the same catalytic conditions; a selective sensing signal is only activated when 1 recognizes methomyl. Furthermore, 1 can be applied to detect methomyl in real water samples. In the luminescent mode of the assay, the method detection limit (MDL) of 1 for methomyl (LD₅₀ =17 mg kg^-1 ) was 1.12 mg L^-1 .

A ratiometric fluorescent probe for visualization of thiophenol and its applications

Thiophenol has a broad application in agriculture and industry. However, thiophenol can harm to the environment and health for its high toxicity. Developing an effective method for detection of thiophenol in the field of environmental and biology is valuable. In this work, we construct a reaction-based ratiometric fluorescent probe (E)-4-(2-(7-(diethylamino)-2-oxo-2H-chromen-3-yl)vinyl)-1-(4-(2,4-dinitrophenoxy)benzyl)pyridin-1-ium bromide (DCVP-DNP) for probing thiophenol in environment and cells by employing (E)-7-(diethylamino)-3-(2-(pyridin-4-yl)vinyl)-2H-chromen-2-one (DCVP) as the fluorophore and 2,4-dinitrophenyl (DNP) ether as the recognition group for the first time. The probe has high selectivity for thiophenol though thiophenol-triggered nucleophilic substitution reaction. In addition, the ratio of emission intensities of the probe has linearly with thiophenol concentration in the range of 0-65 μM and the detection limit of thiophenol is as low as 4.8 × 10^-8 M. Moreover, the probe can not only be applied for detection of thiophenol in water samples, but also image thiophenol in living cells, suggesting its potential application in environment and biological system.

A dual-response near-infrared fluorescent probe for rapid detecting thiophenol and its application in water samples and bio-imaging

Thiophenol is widely known as a highly toxic substance that can cause serious harm to the environment and health. Rapid and non-destructive detection of thiophenol is of great significance for environmental management. In this work, we designed and synthesized a near-infrared (NIR) fluorescent probe, (E)-4-(2-(4-(dicyanomethylene)-4H-chromen-2-yl)vinyl)-2-formylphenyl-2,4-dinitrobenzenesulfonate (DCM-CHO-D), that can respond to thiophenol rapidly (less than 3 min) based on intramolecular charge transfer (ICT) mechanism. DCM-CHO-D has high selectivity and sensitivity to the detection of thiophenol. And there is a linear relationship between the fluorescence intensity of DCM-CHO-D and thiophenol concentration in the range of 0-10 μM, the limit of detection (LOD) is as low as 0.22 μM. What's more, DCM-CHO-D can not only be used as an ideal colorimetric tool for detecting thiophenol in water samples, but also image thiophenol in living cells, indicating its potential utility for thiophenol sensing in environmental and biological samples.

Catalytic Chemosensing Assay for Selective Detection of Methyl Parathion Organophosphate Pesticide

Herein, a catalytic chemosensing assay (CCA), based on a bimetallic complex, [Ru^II (bpy)₂ (CN)₂ ]₂ (Cu^I I)₂ (bpy=2,2'-bipyridine), is described. This complex integrates a task-specific catalyst (Cu^I -catalyst) and a signaling unit ([Ru^II (bpy)₂ (CN)₂ ]) to specifically hydrolyze methyl parathion, a highly toxic organophosphate (OP) pesticide. The bimetallic complex catalyzed the hydrolysis of the phosphate ester to generate o,o-dimethyl thiophosphate (DTP) anion and 4-nitrophenolate. Intrinsically, 4-nitrophenolate absorbed UV/Vis light at λ_max =400 nm, creating the first level of the chemosensing signal. DTP interacted with the original complex to displace the chromophore, [Ru^II (bpy)₂ (CN)₂ ], which was monitored by spectrofluorometry; this was classified as the second level of chemosensing signal. By integrating both spectroscopic and spectrofluorometric signals with a simple AND logic gate, only methyl parathion was able to provide a positive response. Other aromatic and aliphatic OP pesticides (diazinon, fenthion, meviphos, terbufos, and phosalone) and 4-nitrophenyl acetate provided negative responses. Furthermore, owing to the metal-catalyzed hydrolysis of methyl parathion, the CCA system led to the detoxification of the pesticide. The CCA system also demonstrated its catalytic chemosensing properties in the detection of methyl parathion in real samples, including tap water, river water, and underground water.

An efficient ruthenium(ii) tris(bipyridyl)-based chemosensor for the specific detection of cysteine and its luminescence imaging in living zebrafish

A water-soluble, red emissive and cysteine-specific probe has been achieved through 1,4-addition of cysteine to α,β-unsaturated ketones.

A Michael addition–cyclization-based switch-on fluorescent chemodosimeter for cysteine and its application in live cell imaging

We designed and synthesized a fast response fluorescent probe, BTAC (benzothiazol-azacoumarin), for detection of cysteine (Cys).

Reaction-based fluorescent probe for the selective and sensitive detection of thiophenols with a large Stokes shift and its application in water samples

Although widely used in organic synthesis, pharmaceuticals and agrochemicals, thiophenol has brought about a series of ecological problems due to its high toxicity.

3-(2-Bromoacetamido)-N-(9-ethyl-9H)-carbazol fluorescent probe and its application for the determination of thiophenols in rubber products by HPLC with fluorescence detection and atmospheric chemical ionization mass spectrometry identification

A rapid, sensitive, and selective precolumn derivatization method for the simultaneous determination of eight thiophenols using 3-(2-bromoacetamido)-N-(9-ethyl-9H)-carbazol as a labeling reagent by high-performance liquid chromatography with fluorescence detection has been developed. The labeling reagent reacted with thiophenols at 50°C for 50 min in aqueous acetonitrile in the presence of borate buffer (0.10 mol/L, pH 11.2) to give high yields of thiophenol derivatives. The derivatives were identified by online postcolumn mass spectrometry. The collision-induced dissociation spectra for thiophenol derivatives gave the corresponding specific fragment ions at m/z 251.3, 223.3, 210.9, 195.8, and 181.9. At the same time, derivatives exhibited intense fluorescence with an excitation maximum at λ_ex = 276 nm and an emission maximum at λ_em = 385 nm. Excellent linear responses were observed for all analytes over the range of 0.033-6.66 μmol/L with correlation coefficients of more than 0.9997. Detection limits were in the range of 0.94-5.77 μg/L with relative standard deviations of less than 4.54%. The feasibility of derivatization allowed the development of a rapid and highly sensitive method for the quantitative analysis of trace levels of thiophenols from some rubber products. The average recoveries (n = 3) were in the range of 87.21-101.12%.

Label-free colorimetric detection of biological thiols based on target-triggered inhibition of photoinduced formation of AuNPs

A label-free colorimetric method for the detection of biological thiols (biothiols) was developed. This method is based on prevention of the photoinduced reduction of auric ions (Au(III)) in the presence of amino acids (acting as a reducing agent) by biothiols; the photoinduced reduction is inhibited due to the strong interaction of the biothiols with Au(III). In this method, the sample was first incubated in an assay solution containing Au(III) and threonine; the sample solution was then exposed to 254 nm UV light. For samples without biothiols, this process led to the photoreduction of Au(III) followed by growth of gold nanoparticles accompanied by the visually detectable development of a red coloration typified by an absorption peak at ca 530 nm. Conversely, in the presence of biothiols, reduction of Au(III) to Au(0) was prevented by entrapment of Au(III) within the biothiols via the thiol group. The solution thus remained colorless even after UV irradiation, which was used as an indicator of the presence of biothiols. Using this strategy, biothiols were very conveniently analyzed by monitoring color changes of the samples with the naked eye or a UV-vis spectrometer. The strategy based on this interesting phenomenon exhibited high selectivity toward biothiols over common amino acids and was successfully employed for reliable quantification of biothiols present in human plasma, demonstrating its great potential for clinical applications.

Azadipyrromethene cyclometalation in neutral RuII complexes: photosensitizers with extended near-infrared absorption for solar energy conversion applications

In the on-going quest to harvest near-infrared (NIR) photons for energy conversion applications, a novel family of neutral ruthenium(ii) sensitizers has been developed by cyclometalation of an azadipyrromethene chromophore.

Pincer-Type Platinum(II) Complexes Containing N-Heterocyclic Carbene (NHC) Ligand: Structures, Photophysical and Anion-Binding Properties, and Anticancer Activities

Two classes of pincer-type Pt(II) complexes containing tridentate N-donor ligands (1-8) or C-deprotonated N^C^N ligands derived from 1,3-di(2-pyridyl)benzene (10-13) and auxiliary N-heterocyclic carbene (NHC) ligand were synthesized. [Pt(trpy)(NHC)](2+) complexes 1-5 display green phosphorescence in CH2 Cl2 (Φ: 1.1-5.3 %; τ: 0.3-1.0 μs) at room temperature. Moderate-to-intense emissions are observed for 1-7 in glassy solutions at 77 K and for 1-6 in the solid state. The [Pt(N^C^N)(NHC)](+) complexes 10-13 display strong green phosphorescence with quantum yields up to 65 % in CHCl3 . The reactions of 1 with a wide variety of anions were examined in various solvents. The tridentate N-donor ligand of 1 undergoes displacement reaction with CN(-) in protic solvents. Similar displacement of the N^C^N ligand by CN(-) has been observed for 10, leading to a luminescence "switch-off" response. The water-soluble 7 containing anthracenyl-functionalized NHC ligand acts as a light "switch-on" sensor for the detection of CN(-) ion with high selectivity. The in vitro cytotoxicity of the Pt(II) complexes towards HeLa cells has been evaluated. Complex 12 showed high cytotoxicity with IC50 value of 0.46 μM, whereas 1-4 and 6-8 are less cytotoxic. The cellular localization of the strongly luminescent complex 12 traced by using emission microscopy revealed that it mainly localizes in the cytoplasmic structures rather than in the nucleus. This complex can induce mitochondria dysfunction and subsequent cell death.

Rational design of organoboron derivatives as chemosensors for fluoride and cyanide anions and charge transport and luminescent materials for organic light-emitting diodes

The interactions between chemosensors, donor-π-acceptor (D-π-A) dipolar organoboron derivatives, and different (CN⁻, F⁻, Cl⁻, and Br⁻) anions have been theoretically investigated using DFT approaches. Theoretical investigations have been performed to explore the optical, electronic, charge transport, and stability properties of organoboron derivatives as charge transport and luminescent materials for organic light emitting devices (OLEDs). It turned out that the unique selectivity of organoboron derivatives for F⁻/CN⁻ is ascribed to the formation of chemosensors complexes. The frontier molecular orbitals (FMOs) and local density of states analysis have turned out that the vertical electronic transitions of absorption and emission for chemosensors and their F⁻/CN⁻ complexes are characterized as intramolecular charge transfer (ICT). The formation of complexes has effect on the distribution of FMOs and the flowing direction of electronic density for vertical transition. The study of substituent effects suggests that the derivatives with thiophene (2), furan (3), and 1H-pyrrole (4) fragments, are expected to be promising candidates for ratiometric fluorescent fluoride and cyanide chemosensors as well as chromogenic chemosensors, whereas derivatives with pyridine (5) and pyrimidine (6) fragments can serve as chromogenic chemosensors only. Furthermore, all the derivatives are promising luminescent and hole transport materials and 2, 3, 5, and 6 can serve as electron transport materials for OLEDs.

Thiol-addition reactions and their applications in thiol recognition

Because of the biological importance of thiols, the development of probes for thiols has been an active research area in recent years. In this review, we summarize the results of recent exciting reports regarding thiol-addition reactions and their applications in thiol recognition. The examples reported can be classified into four reaction types including 1,1, 1,2, 1,3, 1,4 addition reactions, according to their addition mechanisms, based on different Michael acceptors. In all cases, the reactions are coupled to color and/or emission changes, although some examples dealing with electrochemical recognition have also been included. The use of thiol-addition reactions is a very simple and straightforward procedure for the preparation of thiol-sensing probes.

Chemodosimetric analysis in food-safety monitoring: design, synthesis, and application of a bimetallic Re(i)–Pt(ii) complex for detection of dimethyl sulfide in foods

Detection of neutral biogenic sulfides plays a crucial role in food safety. A new heterobimetallic Re(i)–Pt(ii) donor–acceptor chemodosimeter—[Re(biq)(CO)₃(CN)]–[Pt(DMSO)(Cl)₂] (1, biq = 2,2′-biquinoline)—was synthesized and characterized.

An Ru(ii)–Fe(iii) bimetallic complex as a multifunctional device for detecting, signal amplifying, and degrading oxalate

A multifunctional device that can monitor the level of pollutants, magnify weak signals, and subsequently degrade pollutants is highly desirable. A new Ru(ii)–Fe(iii) complex—[Ru^II(^tBubpy)(CN)₄]₂–[Fe^III(H₂O)₃Cl]₂·8H₂O (1,^tBubpy = 4,4′-di-tert-butyl-2,2′-bipyridine)—was synthesized and characterized.

Development of a ruthenium(II) complex-based luminescent probe for hypochlorous acid in living cells

A novel Ru(II) complex, [Ru(bpy)2(DNPS-bpy)](PF6)2 (bpy: 2,2'-bipyridine, DNPS-bpy: 4-(2,4-dinitrophenylthio)methylene-4'-methyl-2,2'-bipyridine), has been designed and synthesized as a highly sensitive and selective luminescence probe for the recognition and detection of hypochlorous acid (HOCl) in living cells by exploiting a "signaling moiety-recognition linker-quencher" sandwich approach. The complex possesses large stokes shift (170 nm), long emission wavelength (626 nm), and low cytotoxicity. Owing to the effective photoinduced electron transfer (PET) from Ru(II) center to the electron acceptor, 2,4-dinitrophenyl (DNP), the red-emission of bipyridine-Ru(II) complex was completely withheld. In aqueous media, HOCl can trigger an oxidation reaction to cleave the DNP moiety from the Ru(II) complex, which results in the formation of a highly luminescent bipyridine-Ru(II) complex derivative, [Ru(bpy)2(COOH-bpy)](PF6)2 (COOH-bpy: 4'-methyl-2,2'-bipyridyl-4-carboxylic acid), accompanied by a 190-fold luminescence enhancement. Cell imaging experimental results demonstrated that [Ru(bpy)2(DNPS-bpy)](PF6)2 is membrane permeable, and can be applied for capturing and visualizing the exogenous/endogenous HOCl molecules in living cell samples. The development of this Ru(II) complex probe not only provides a useful tool for monitoring HOCl in living systems, but also strengthens the application of transition metal complex-based luminescent probes for bioimaging.

Designing a thiol specific fluorescent probe for possible use as a reagent for intracellular detection and estimation in blood serum: kinetic analysis to probe the role of intramolecular hydrogen bonding

A new and simple chemodosimetric probe L1 is utilized for the selective detection of biothiols in the presence of other relevant amino acids under physiological conditions (pH = 7.4). This eventually led to a turn-off luminescence response due to an effective photoinduced electron transfer based signaling mechanism. A comparison of the results of the fluorescence kinetic analysis and (1)H NMR studies of the reaction between thiol and L1 or the analogous compound L2 revealed the role of intramolecular hydrogen bonding in activating the imine functionality towards nucleophilic addition. Such an example is not common in contemporary literature. Conventional MTT assay studies revealed that this probe (L1) has low cytotoxicity. Results of the cell imaging studies revealed that this probe was cell membrane permeable and could detect the intracellular distribution of biothiols within living HeLa cells. Furthermore, our studies with human blood plasma demonstrated the possibility of using this reagent for the quantitative optical detection of total biothiols in biological fluid. Such an example for the detection of biothiols in real biological samples is rare in the contemporary literature. These results clearly demonstrate the possibility of using this reagent in medicinal biology and diagnostic applications.

A DFT study of pyrrole-isoxazole derivatives as chemosensors for fluoride anion

The interactions between chemosensors, 3-amino-5-(4,5,6,7-tetrahydro-1H-indol-2-yl)isoxazole-4-carboxamide (AIC) derivatives, and different anions (F(-) Cl(-), Br(-), AcO(-), and H(2)PO(4) (-)) have been theoretically investigated using DFT approaches. It turned out that the unique selectivity of AIC derivatives for F(-) is ascribed to their ability of deprotonating the host sensors. Frontier molecular orbital (FMO) analyses have shown that the vertical electronic transitions of absorption and emission for the sensing signals are characterized as intramolecular charge transfer (ICT). The study of substituent effects suggests that all the substituted derivatives are expected to be promising candidates for fluoride chemosensors both in UV-vis and fluorescence spectra except for derivative with benzo[d]thieno[3,2-b]thiophene fragment that can serve as ratiometric fluorescent fluoride chemosensor only.

Ru-Pt and Ru-Pd heterobimetallic complexes based on a new ligand with two distinct chelate sites

A new ligand p-[N-2-(2'-pyridyl)benzimidazolyl]-[N-2-(2'-pyridyl)indolyl]-benzene (L1) has been synthesized and fully characterized. L1 has two distinct chelating sites: one N,N-chelate site and one N,C-chelate site. This ligand has been found to be very effective in selective binding to two different metal ions. Two new heterobimetallic complexes Ru-Pt and Ru-Pd using L1 as the bridging ligand have been successfully synthesized and fully characterized. To understand the mutual influence of the two metal centers on electronic and photophysical properties, the corresponding monometallic Ru(II), Pt(II) and Pd(II) compounds have also been synthesized and investigated. All Ru(II)-containing complexes have been found to be luminescent. Electronic communication between the two different metal centers in the heterobimetallic compounds was found to be weak. The Pt(II) moiety appears to enhance the phosphorescent efficiency of the Ru(II) unit while the Pd(II) analogue has little influence.

Ratiometric fluorescent probe for enantioselective detection of D-cysteine in aqueous solution

A ratiometric fluorescent probe based on a Cd(2+)-ACAQ complex was designed and demonstrated for the chemo- and enantioselective detection of cysteine in 99:1 buffered HEPES:ACN solutions. Under the measuring conditions, the sensor demonstrates high selectivity toward Cys against Hcy and GSH, and an enantioselectivity of 3.35 can be achieved for antipodal forms of Cys.